RAPID-CITY (page 3 of 3) - SNMP MIB Browser

All MIBs › RAPID-CITY

Organization: Bay Networks, Rapid-City Group

Last Updated: 1997-01-01

Category: Bay Networks / Nortel, Routing, SMI / Registration

Description: Provides the base MIB framework for Bay Networks Rapid-City ERS switch management.

6,485 OIDs total — showing 6,079-6,485 (page 3 of 3)

« Prev Page 3 of 3

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT rcPrFilterAceEthVlanTagPrioVlanTagPrio	1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.3	INTEGER	read-write	Priority bits (3-bit field) from the 802.1Q/p tag.
INT rcPrFilterAceEthVlanTagPrioOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.4	INTEGER	read-write	Operators for Ace Ethernet Vlan Tag Priority.
ROW rcPrFilterAceEthVlanTagPrioRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.5.1.5	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceEthPortTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.6		not-accessible	A table of Aces to store Ethernet Port Header information of each Ace in context of its parent Acl.
rcPrFilterAceEthPortEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1		not-accessible	One Ace entry holding Ace Ethernet Port information. An Ace is a member of one Acl.
INT rcPrFilterAceEthPortAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.1	INTEGER	read-only	An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceEthPortAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.2	INTEGER	read-only	An index to the AceEthPortEntry, a unique identifier for Acl entry in the range of Table Size.
POR rcPrFilterAceEthPortPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.3	PortSet	read-write	Port Number or Port List to match on.
INT rcPrFilterAceEthPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.4	INTEGER	read-write	Operator for Ace Ethernet Port.
ROW rcPrFilterAceEthPortRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.6.1.5	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceEthVlanIdTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.7		not-accessible	A table of Aces to store Ethernet Vlan Id Header information of each Ace in context of its parent Acl.
rcPrFilterAceEthVlanIdEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1		not-accessible	One Ace entry holding Ace Ethernet Vlan Id information. An Ace is a member of one Acl.
INT rcPrFilterAceEthVlanIdAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.1	INTEGER	read-only	An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceEthVlanIdAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.2	INTEGER	read-only	An index to the AceEthVlanIdEntry, a unique identifier for Acl entry in the range of Table Size.
IDL rcPrFilterAceEthVlanIdVlanIdList	1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.3	IdList	read-write	Vlan Id to match on.
INT rcPrFilterAceEthVlanIdOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.4	INTEGER	read-write	Operator for Ace Ethernet VlanId.
ROW rcPrFilterAceEthVlanIdRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.7.1.5	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceArpTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.8		not-accessible	A table of Aces to store Arp Header information of each Ace in context of its parent Acl.
rcPrFilterAceArpEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1		not-accessible	One Ace entry holding Ace Arp Header information. Ace is a member of one Acl.
INT rcPrFilterAceArpAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.1	INTEGER	read-only	An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceArpAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.2	INTEGER	read-only	An index to the AceArpEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceArpType	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.3	INTEGER	read-write	Ace Arp Operation.
INT rcPrFilterAceArpOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.4	INTEGER	read-write	Operator for Ace Arp Operation.
INT rcPrFilterAceArpValue	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.5	INTEGER	read-write	Ace Arp can be a request or a response.
ROW rcPrFilterAceArpRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.8.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceIpSrcAddrTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.9		not-accessible	A table of Aces to store IP Source Address Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpSrcAddrEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1		not-accessible	One Ace entry holding Ace IP Source Address Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpSrcAddrAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.1	INTEGER	read-only	An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpSrcAddrAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.2	INTEGER	read-only	An index to the AceIpSrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpSrcAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.3	OCTET STRING	read-write	The list of ip source address to match from IP header.
INT rcPrFilterAceIpSrcAddrListCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the ip src address.
INT rcPrFilterAceIpSrcAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.5	INTEGER	read-write	Operators for Ace Ip Source Address.
ROW rcPrFilterAceIpSrcAddrRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.9.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceIpDstAddrTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.10		not-accessible	A table of Aces to store IP Destination Address Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpDstAddrEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1		not-accessible	One Ace entry holding Ace IP Destination Address Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpDstAddrAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.1	INTEGER	read-only	An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpDstAddrAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.2	INTEGER	read-only	An index to the AceIpDstAddrEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpDstAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.3	OCTET STRING	read-write	The list of ip dst address to match from IP header.
INT rcPrFilterAceIpDstAddrListCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the IP Destination Address.
INT rcPrFilterAceIpDstAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.5	INTEGER	read-write	Operators for Ace IP Destination Address.
ROW rcPrFilterAceIpDstAddrRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.10.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceIpDscpTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.11		not-accessible	A table of Aces to store IP Dscp Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpDscpEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1		not-accessible	One Ace entry holding Ace IP Dscp Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpDscpAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.1	INTEGER	read-only	An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpDscpAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.2	INTEGER	read-only	An index to the AceIpDscpEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpDscpList	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.3	OCTET STRING	read-write	The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to match specific diffserv class traffic. Set the field value to desired dscp code for 'rcPrFilterAceIpDscp' field to match non-standard traffic classes and local use PHBs.
INT rcPrFilterAceIpDscpListCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the dscp values.
INT rcPrFilterAceIpDscpOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.5	INTEGER	read-write	Operators for Ace Ip Dscp.
ROW rcPrFilterAceIpDscpRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.11.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceIpProtoTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.12		not-accessible	A table of Aces to store IP Proto Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpProtoEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1		not-accessible	One Ace entry holding Ace IP Proto Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpProtoAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.1	INTEGER	read-only	An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpProtoAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.2	INTEGER	read-only	An index to the AceIpProtoEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpProtoList	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.3	OCTET STRING	read-write	Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired protocol number is not available in the enumerated list set protocol to desired integer value
INT rcPrFilterAceIpProtoListCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the ethernet protocol ids.
INT rcPrFilterAceIpProtoOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.5	INTEGER	read-write	Operators for Ace Ip Protocols.
ROW rcPrFilterAceIpProtoRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.12.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceIpOptionsTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.13		not-accessible	A table of Aces to store IP Options Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpOptionsEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1		not-accessible	One Ace entry holding Ace IP Options Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpOptionsAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.1	INTEGER	read-only	An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpOptionsAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.2	INTEGER	read-only	An index to the AceIpOptionsEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpOptionsOptions	1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.3	INTEGER	read-write	Ip options to be matched from the IP Header.
INT rcPrFilterAceIpOptionsOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.4	INTEGER	read-write	Logical Operator - only 'any' is valid at present.
ROW rcPrFilterAceIpOptionsRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.13.1.5	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceIpFragTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.14		not-accessible	A table of Aces to store IP Fragmentation Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpFragEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1		not-accessible	One Ace entry holding Ace IP Fragmentation Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpFragAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.1	INTEGER	read-only	An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpFragAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.2	INTEGER	read-only	An index to the AceIpFragEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpFragFragmentation	1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.3	INTEGER	read-write	Ip Fragmentation bits to be matched from the IP Header.
INT rcPrFilterAceIpFragOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.4	INTEGER	read-write	Operator for Ip fragmentation.
ROW rcPrFilterAceIpFragRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.14.1.5	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceProtoTcpSrcPortTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.15		not-accessible	A table of Aces to store TCP Source Port information of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpSrcPortEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1		not-accessible	One entry holding Ace Protocol TCP Source Port information. An Ace is a member of one Acl.
INT rcPrFilterAceProtoTcpSrcPortAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.1	INTEGER	read-only	An index to the AceProtoTcpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoTcpSrcPortAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.2	INTEGER	read-only	An index to the AceProtoTcpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoTcpSrcPortPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.3	OCTET STRING	read-write	Port Number or Port List to match on.
INT rcPrFilterAceProtoTcpSrcPortCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the TCP source port.
INT rcPrFilterAceProtoTcpSrcPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.5	INTEGER	read-write	Operator for Ace Protocol TcpSrcPort.
ROW rcPrFilterAceProtoTcpSrcPortRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.15.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceProtoUdpSrcPortTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.16		not-accessible	A table of Aces to store UDP Source Port information of each Ace in context of its parent Acl.
rcPrFilterAceProtoUdpSrcPortEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1		not-accessible	One entry holding Ace Protocol UDP Source Port information. An Ace is a member of one Acl.
INT rcPrFilterAceProtoUdpSrcPortAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.1	INTEGER	read-only	An index to the AceProtoUdpSrcPortEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoUdpSrcPortAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.2	INTEGER	read-only	An index to the AceProtoUdpSrcPortEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoUdpSrcPortPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.3	OCTET STRING	read-write	Port Number or Port List to match on.
INT rcPrFilterAceProtoUdpSrcPortCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the UDP source port.
INT rcPrFilterAceProtoUdpSrcPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.5	INTEGER	read-write	Operator for Ace Protocol UdpSrcPort.
ROW rcPrFilterAceProtoUdpSrcPortRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.16.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceProtoTcpDstPortTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.17		not-accessible	A table of Aces to store TCP Dest Port information of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpDstPortEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1		not-accessible	One entry holding Ace Protocol TCP Dest Port information. An Ace is a member of one Acl.
INT rcPrFilterAceProtoTcpDstPortAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.1	INTEGER	read-only	An index to the AceProtoTcpDstPortEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoTcpDstPortAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.2	INTEGER	read-only	An index to the AceProtoTcpDstPortEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoTcpDstPortPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.3	OCTET STRING	read-write	Port Number or Port List to match on.
INT rcPrFilterAceProtoTcpDstPortCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the TCP dest port.
INT rcPrFilterAceProtoTcpDstPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.5	INTEGER	read-write	Operator for Ace Protocol TcpDstPort.
ROW rcPrFilterAceProtoTcpDstPortRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.17.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceProtoUdpDstPortTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.18		not-accessible	A table of Aces to store UDP Dest Port information of each Ace in context of its parent Acl.
rcPrFilterAceProtoUdpDstPortEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1		not-accessible	One entry holding Ace Protocol UDP Dest Port information. An Ace is a member of one Acl.
INT rcPrFilterAceProtoUdpDstPortAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.1	INTEGER	read-only	An index to the AceProtoUdpDstPortEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoUdpDstPortAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.2	INTEGER	read-only	An index to the AceProtoUdpDstPortEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoUdpDstPortPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.3	OCTET STRING	read-write	Port Number or Port List to match on.
INT rcPrFilterAceProtoUdpDstPortCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the UDP dest port.
INT rcPrFilterAceProtoUdpDstPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.5	INTEGER	read-write	Operator for Ace Protocol UdpDstPort.
ROW rcPrFilterAceProtoUdpDstPortRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.18.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceProtoIcmpMsgTypeTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.19		not-accessible	A table of Aces to store ICMP message type information of each Ace in context of its parent Acl.
rcPrFilterAceProtoIcmpMsgTypeEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1		not-accessible	One entry holding Ace ICMP message type information. An Ace is a member of one Acl.
INT rcPrFilterAceProtoIcmpMsgTypeAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.1	INTEGER	read-only	An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoIcmpMsgTypeAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.2	INTEGER	read-only	An index to the AceProtoIcmpMsgTypeEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoIcmpMsgTypeList	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.3	OCTET STRING	read-write	One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved).
INT rcPrFilterAceProtoIcmpMsgTypeCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the ICMP message types.
INT rcPrFilterAceProtoIcmpMsgTypeOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.5	INTEGER	read-write	Operator for Ace Protocol IcmpMsgTypes.
ROW rcPrFilterAceProtoIcmpMsgTypeRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.19.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceProtoTcpFlagsTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.20		not-accessible	A table of Aces to store TCP Flags information of each Ace in context of its parent Acl.
rcPrFilterAceProtoTcpFlagsEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1		not-accessible	One entry holding Ace Protocol TCP flags information. An Ace is a member of one Acl.
INT rcPrFilterAceProtoTcpFlagsAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.1	INTEGER	read-only	An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoTcpFlagsAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.2	INTEGER	read-only	An index to the rcPrFilterAceProtoTcpFlagsEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoTcpFlagsList	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.3	OCTET STRING	read-write	One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 63
INT rcPrFilterAceProtoTcpFlagsCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the TCP flags.
INT rcPrFilterAceProtoTcpFlagsOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.5	INTEGER	read-write	Operator for Ace Protocol TcpFlags.
ROW rcPrFilterAceProtoTcpFlagsRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.20.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAcePattern1Table	1.3.6.1.4.1.2272.1.202.1.1.2.4.21		not-accessible	A table of pattern fields for Aces to manage the settings for each user defined field.
rcPrFilterAcePattern1Entry	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1		not-accessible	One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl.
INT rcPrFilterAcePattern1AclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.1	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAcePattern1AceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.2	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
STR rcPrFilterAcePattern1Name	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.3	DisplayString	read-write	A descriptive name chosen by the administrator for the Ace Pattern Entry.
OCT rcPrFilterAcePattern1Value	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.4	OCTET STRING	read-write	Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength.
INT rcPrFilterAcePattern1Oper	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.5	INTEGER	read-write	Operators for Ace Pattern.
ROW rcPrFilterAcePattern1RowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.21.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAcePattern2Table	1.3.6.1.4.1.2272.1.202.1.1.2.4.22		not-accessible	A table of pattern fields for Aces to manage the settings for each user defined field.
rcPrFilterAcePattern2Entry	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1		not-accessible	One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl.
INT rcPrFilterAcePattern2AclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.1	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAcePattern2AceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.2	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
STR rcPrFilterAcePattern2Name	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.3	DisplayString	read-write	A descriptive name chosen by the administrator for the Ace Pattern Entry.
OCT rcPrFilterAcePattern2Value	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.4	OCTET STRING	read-write	Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength.
INT rcPrFilterAcePattern2Oper	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.5	INTEGER	read-write	Operators for Ace Pattern.
ROW rcPrFilterAcePattern2RowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.22.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAcePattern3Table	1.3.6.1.4.1.2272.1.202.1.1.2.4.23		not-accessible	A table of pattern fields for Aces to manage the settings for each user defined field.
rcPrFilterAcePattern3Entry	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1		not-accessible	One Ace entry holding Ace User Defined Pattern information. Ace is a member of one Acl.
INT rcPrFilterAcePattern3AclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.1	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAcePattern3AceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.2	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
STR rcPrFilterAcePattern3Name	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.3	DisplayString	read-write	A descriptive name chosen by the administrator for the Ace Pattern Entry.
OCT rcPrFilterAcePattern3Value	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.4	OCTET STRING	read-write	Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength.
INT rcPrFilterAcePattern3Oper	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.5	INTEGER	read-write	Operators for Ace Pattern.
ROW rcPrFilterAcePattern3RowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.23.1.6	RowStatus	read-write	Create/delete operations for this entry.
rcPrFilterAceStatsTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.24		not-accessible	A table of ACE Statistics Entries to store per-ACE-per-Port Statistics
rcPrFilterAceStatsEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1		not-accessible	Ace Statistics entry holding per-ACE-per-port Statistics
INT rcPrFilterAceStatsAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.1	INTEGER	read-only	An index to the AceStatsEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceStatsAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.2	INTEGER	read-only	An index to the AceStatsEntry, a unique identifier for ACE entry in the range of Table Size.
INT rcPrFilterAceStatsPortId	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.3	INTEGER	read-only	An index to the AceStatsEntry, a unique identifier of the portId
C64 rcPrFilterAceStatsMatchCountPkts	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.4	Counter64	read-only	Count of packets that match this particular Ace on this particular port.
C64 rcPrFilterAceStatsMatchCountOctets	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.5	Counter64	read-only	Byte count of traffic that match this particular Ace on this particular port
T/F rcPrFilterAceStatsClear	1.3.6.1.4.1.2272.1.202.1.1.2.4.24.1.6	TruthValue	read-write	Clear Per-ACE-Per-Port statistics.
rcPrFilterAceEthShowTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.25		not-accessible	A table of Aces to store Ethernet Header information of each Ace in context of its parent Acl.
rcPrFilterAceEthShowEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1		not-accessible	One Ace entry holding Ace Ethernet information. Ace is a member of one Acl.
INT rcPrFilterAceEthShowAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.1	INTEGER	read-only	An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceEthShowAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.2	INTEGER	read-only	An index to the AceEthernetEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceEthShowSrcAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.3	OCTET STRING	read-only	The list of ethernet source address to match.
INT rcPrFilterAceEthShowSrcAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.4	INTEGER	read-only	Operators for Ace Ethernet Source MAC Address.
OCT rcPrFilterAceEthShowDstAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.5	OCTET STRING	read-only	List of ethernet destination address to match.
INT rcPrFilterAceEthShowDstAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.6	INTEGER	read-only	Operators for Ace Ethernet Destination MAC Address.
OCT rcPrFilterAceEthShowEtherTypeList	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.7	OCTET STRING	read-only	EtherType value from ethernet header. For example ARP uses 0x0806, IP uses 0x0800. The platform support determines the behavior for 802.1Q/p tagged packets. The EtherType for 802.1Q tagged frames is 0x8100. Valid range for the 16-bit Ether-type is 0..65535 and the attribute supports lists/ranges of values. Invalid ether-type value 65536 is interpreted as field is not desired in match criteria.
INT rcPrFilterAceEthShowEtherTypeOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.8	INTEGER	read-only	Ethernet Type Operators.
INT rcPrFilterAceEthShowVlanTagPrio	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.9	INTEGER	read-only	Priority bits (3-bit field) from the 802.1Q/p tag.
INT rcPrFilterAceEthShowVlanTagPrioOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.10	INTEGER	read-only	Operators for Ace Ethernet Vlan Tag Priority.
POR rcPrFilterAceEthShowPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.11	PortSet	read-only	Port Number or Port List to match on.
INT rcPrFilterAceEthShowPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.12	INTEGER	read-only	Operator for Ace Ethernet Port.
IDL rcPrFilterAceEthShowVlanIdList	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.13	IdList	read-only	Vlan Id to match on.
INT rcPrFilterAceEthShowVlanIdOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.25.1.14	INTEGER	read-only	Operator for Ace Ethernet VlanId.
rcPrFilterAceIpShowTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.26		not-accessible	A table of Aces to store IP Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpShowEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1		not-accessible	One Ace entry holding Ace IP information. Ace is a member of one Acl.
INT rcPrFilterAceIpShowAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.1	INTEGER	read-only	An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpShowAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.2	INTEGER	read-only	An index to the AceIpShowEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpShowSrcAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.3	OCTET STRING	read-only	The list of ip source address to match from IP header.
INT rcPrFilterAceIpShowSrcAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.4	INTEGER	read-only	Operators for Ace Ip Source Address.
OCT rcPrFilterAceIpShowDstAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.5	OCTET STRING	read-only	The list of ip dst address to match from IP header.
INT rcPrFilterAceIpShowDstAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.6	INTEGER	read-only	Operators for Ace Ip Destination Address.
OCT rcPrFilterAceIpShowDscpList	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.7	OCTET STRING	read-only	The 6-bit DSCP field from the ToS byte in Ipv4 header encodes the PHB information per DiffServ standards (Refer to DiffServ RFCs 2474). Set the Dscp to PHB (like EF) or PHB-class(like AF1 which includes AF11, AF12,AF13) to match specific diffserv class traffic. Set the field value to desired dscp code for 'rcPrFilterAceIpDscp' field to match non-standard traffic classes and local use PHBs.
INT rcPrFilterAceIpShowDscpOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.8	INTEGER	read-only	Operators for Ace Ip Dscp.
OCT rcPrFilterAceIpShowProtoList	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.9	OCTET STRING	read-only	Ip protocol Type from the ip header to be matched. Valid Ip protocol range is 0..255. Few of the Protocol Types are enumerated above. In case the desired protocol number is not available in the enumerated list set protocol to desired integer value
INT rcPrFilterAceIpShowProtoOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.10	INTEGER	read-only	Operators for Ace Ip Protocols.
INT rcPrFilterAceIpShowOptions	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.11	INTEGER	read-only	Ip options to be matched from the IP Header.
INT rcPrFilterAceIpShowOptionsOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.12	INTEGER	read-only	Logical Operator - only 'any' is valid at present.
INT rcPrFilterAceIpShowFragmentation	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.13	INTEGER	read-only	Ip Fragmentation bits to be matched from the IP Header.
INT rcPrFilterAceIpShowFragOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.26.1.14	INTEGER	read-only	Operator for Ip fragmentation.
rcPrFilterAceProtoShowTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.27		not-accessible	A table of Aces to store Protocol Header information of each Ace in context of its parent Acl.
rcPrFilterAceProtoShowEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1		not-accessible	One Ace entry holding Ace Ethernet information. Ace is a member of one Acl.
INT rcPrFilterAceProtoShowAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.1	INTEGER	read-only	An index to the AceProtoShowEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceProtoShowAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.2	INTEGER	read-only	An index to the AceProtoShowEntry, a unique identifier for Ace entry in the range of Table Size.
OCT rcPrFilterAceProtoShowTcpSrcPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.3	OCTET STRING	read-only	Port Number or Port List to match on.
INT rcPrFilterAceProtoShowTcpSrcPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.4	INTEGER	read-only	Operator for Ace Protocol TcpSrcPort.
OCT rcPrFilterAceProtoShowUdpSrcPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.5	OCTET STRING	read-only	Port Number or Port List to match on.
INT rcPrFilterAceProtoShowUdpSrcPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.6	INTEGER	read-only	Operator for Ace Protocol UdpSrcPort.
OCT rcPrFilterAceProtoShowTcpDstPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.7	OCTET STRING	read-only	Port Number or Port List to match on.
INT rcPrFilterAceProtoShowTcpDstPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.8	INTEGER	read-only	Operator for Ace Protocol TcpDstPort.
OCT rcPrFilterAceProtoShowUdpDstPort	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.9	OCTET STRING	read-only	Port Number or Port List to match on.
INT rcPrFilterAceProtoShowUdpDstPortOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.10	INTEGER	read-only	Operator for Ace Protocol UdpDstPort.
OCT rcPrFilterAceProtoShowIcmpMsgTypeList	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.11	OCTET STRING	read-only	One or a list of Icmp messages to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 255 (reserved).
INT rcPrFilterAceProtoShowIcmpMsgTypeOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.12	INTEGER	read-only	Operator for Ace Protocol IcmpMsgTypes.
OCT rcPrFilterAceProtoShowTcpFlagsList	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.13	OCTET STRING	read-only	One or a list of Tcp flags to be matched. Need to provide strings, number of protocol header types (pre-defined values plus user-defined headers). Valid range is 0 to 63
INT rcPrFilterAceProtoShowTcpFlagsOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.27.1.14	INTEGER	read-only	Operator for Ace Protocol TcpFlags.
rcPrFilterAcePatternShowTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.28		not-accessible	A table of Aces to store Pattern 1, 2, 3 Header information of each Ace in context of its parent Acl.
rcPrFilterAcePatternShowEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1		not-accessible	One Ace entry holding Ace Pattern 1, 2, 3 information. Ace is a member of one Acl.
INT rcPrFilterAcePatternShowAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.1	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAcePatternShowAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.2	INTEGER	read-only	An index to the AcePatternEntry, a unique identifier for Acl entry in the range of Table Size.
STR rcPrFilterAcePatternShowPattern1Name	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.3	DisplayString	read-only	A descriptive name chosen by the administrator for the Ace Pattern Entry.
OCT rcPrFilterAcePatternShowPattern1Value	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.4	OCTET STRING	read-only	Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength.
INT rcPrFilterAcePatternShowPattern1Oper	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.5	INTEGER	read-only	Operators for Ace Pattern.
STR rcPrFilterAcePatternShowPattern2Name	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.6	DisplayString	read-only	A descriptive name chosen by the administrator for the Ace Pattern Entry.
OCT rcPrFilterAcePatternShowPattern2Value	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.7	OCTET STRING	read-only	Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength.
INT rcPrFilterAcePatternShowPattern2Oper	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.8	INTEGER	read-only	Operators for Ace Pattern.
STR rcPrFilterAcePatternShowPattern3Name	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.9	DisplayString	read-only	A descriptive name chosen by the administrator for the Ace Pattern Entry.
OCT rcPrFilterAcePatternShowPattern3Value	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.10	OCTET STRING	read-only	Set the pattern value as numeric string. The numeric value of each byte is encoded in one octet of the string. Unused bytes are left at the trailing end of string. The number of bytes to extract from this string is set in rcPrFilterActPatternLength.
INT rcPrFilterAcePatternShowPattern3Oper	1.3.6.1.4.1.2272.1.202.1.1.2.4.28.1.11	INTEGER	read-only	Operators for Ace Pattern.
rcPrFilterAceIpv6SrcAddrTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.29		not-accessible	A table of Aces to store IPv6 Source Address Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpv6SrcAddrEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1		not-accessible	One Ace entry holding Ace IPv6 Source Address Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpv6SrcAddrAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.1	INTEGER	read-only	An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpv6SrcAddrAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.2	INTEGER	read-only	An index to the AceIpv6SrcAddrEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpv6SrcAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.3	OCTET STRING	read-write	The list of ipv6 source address to match from IPv6 header.
INT rcPrFilterAceIpv6SrcAddrListCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the ipv6 src address.
INT rcPrFilterAceIpv6SrcAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.5	INTEGER	read-write	Operators for Ace Ipv6 Source Address.
ROW rcPrFilterAceIpv6SrcAddrRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.29.1.6	RowStatus	read-create	Create/delete operations for this entry.
rcPrFilterAceIpv6DstAddrTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.30		not-accessible	A table of Aces to store IPv6 Destination Address Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpv6DstAddrEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1		not-accessible	One Ace entry holding Ace IPv6 Destination Address Header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpv6DstAddrAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.1	INTEGER	read-only	An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpv6DstAddrAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.2	INTEGER	read-only	An index to the AceIpv6DstAddrEntry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpv6DstAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.3	OCTET STRING	read-write	The list of ipv6 dst address to match from IPv6 header.
INT rcPrFilterAceIpv6DstAddrListCount	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.4	INTEGER	read-write	Count to store the number of discrete ranges entered for the IPv6 Destination Address.
INT rcPrFilterAceIpv6DstAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.5	INTEGER	read-write	Operators for Ace IPv6 Destination Address.
ROW rcPrFilterAceIpv6DstAddrRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.30.1.6	RowStatus	read-create	Create/delete operations for this entry.
rcPrFilterAceIpv6NextHdrTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.31		not-accessible	A table of Aces to store IPv6 Next header Header information of each Ace in context of its parent Acl.
rcPrFilterAceIpv6NextHdrEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1		not-accessible	One Ace entry holding Ace IPv6 Next header information. An Ace is a member of one Acl.
INT rcPrFilterAceIpv6NextHdrAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.1	INTEGER	read-only	An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpv6NextHdrAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.2	INTEGER	read-only	An index to the AceIpv6NextHdrEntry, a unique identifier for Acl entry in the range of Table Size.
IPV rcPrFilterAceIpv6NextHdrNextHdr	1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.3	Ipv6NextHdr	read-write	The ipv6 next header to look for.
INT rcPrFilterAceIpv6NextHdrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.4	INTEGER	read-write	Operators for Ace IPv6 Next header.
ROW rcPrFilterAceIpv6NextHdrRowStatus	1.3.6.1.4.1.2272.1.202.1.1.2.4.31.1.5	RowStatus	read-create	Create/delete operations for this entry.
rcPrFilterAceIpv6ShowTable	1.3.6.1.4.1.2272.1.202.1.1.2.4.32		not-accessible	A table of Aces to display ipv6 information of each Ace in context of its parent Acl.
rcPrFilterAceIpv6ShowEntry	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1		not-accessible	One Ace entry holding Ace ipv6 information. Ace is a member of one Acl.
INT rcPrFilterAceIpv6ShowAclId	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.1	INTEGER	read-only	An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size.
INT rcPrFilterAceIpv6ShowAceId	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.2	INTEGER	read-only	An index to the AceIpv6Entry, a unique identifier for Acl entry in the range of Table Size.
OCT rcPrFilterAceIpv6ShowSrcAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.3	OCTET STRING	read-only	The list of v6 source address to display.
INT rcPrFilterAceIpv6ShowSrcAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.4	INTEGER	read-only	Operators for Ace v6 Source Address.
OCT rcPrFilterAceIpv6ShowDstAddrList	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.5	OCTET STRING	read-only	List of v6 destination address to display.
INT rcPrFilterAceIpv6ShowDstAddrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.6	INTEGER	read-only	Operators for Ace v6 Destination Address.
IPV rcPrFilterAceIpv6ShowNxtHdrNxtHdr	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.7	Ipv6NextHdr	read-only	v6 next hdr to display.
INT rcPrFilterAceIpv6ShowNxtHdrOper	1.3.6.1.4.1.2272.1.202.1.1.2.4.32.1.8	INTEGER	read-only	Operator for Ace v6 next hdr.
rcVrf	1.3.6.1.4.1.2272.1.203
rcVrfMib	1.3.6.1.4.1.2272.1.203.1
rcVrfNotifications	1.3.6.1.4.1.2272.1.203.1.0
rcVrfObjects	1.3.6.1.4.1.2272.1.203.1.1
rcVrfConfig	1.3.6.1.4.1.2272.1.203.1.1.1
rcVrfConfigScalars	1.3.6.1.4.1.2272.1.203.1.1.1.1
OID rcVrfConfigNextAvailableVrfId	1.3.6.1.4.1.2272.1.203.1.1.1.1.1	VrfIdentifier	read-only	The next available Virtual Router Id (index). This object provides a hint for the rcVrfId value to use when administratively creating a new rcVrfConfigEntry. A GET of this object returns the next available rcVrfId value to be used to create an entry in the associated rcVrfConfigTable; or zero, if no valid rcVrfId value is available. A value of zero(0) indicates that it is not possible to create a new rcVrfConfigEntry. This object also returns a value of zero when it is the lexicographic successor of a varbind presented in an SNMP GETNEXT or GETBULK request, for which circumstance it is assumed that ifIndex allocation is unintended. Successive GETs will typically return different values, thus avoiding collisions among cooperating management clients seeking to create table entries simultaneously. Unless specified otherwise by its MAX-ACCESS and DESCRIPTION clauses, an object of this type is read-only, and a SET of such an object returns a notWritable error.
rcVrfConfigTable	1.3.6.1.4.1.2272.1.203.1.1.1.2		not-accessible	This table is for creating the new Virtual Routers.
rcVrfConfigEntry	1.3.6.1.4.1.2272.1.203.1.1.1.2.1		not-accessible	The entries in this table can be added/deleted using the rcVrfRowStatus.
OID rcVrfId	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.1	VrfIdentifier	not-accessible	The unique id of this virtual router instance. A Virtual Router cannot not be created with rcVrfId = 0. VRFID 0 is reserved for the Administrative VRF.
ROW rcVrfRowStatus	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.2	RowStatus	read-create	The status column has three defined values: - `active', which indicates that the conceptual row is available for use by the managed device; - `createAndGo', which is supplied by a management station wishing to create a new instance of a conceptual row and to have its status automatically set to active, making it available for use by the managed device; - `destroy', which is supplied by a management station wishing to delete all of the instances associated with an existing conceptual row.
STR rcVrfName	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.3	DisplayString	read-write	The Name of the Virtual Router.
STR rcVrfContextName	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.4	SnmpAdminString	read-create	The SNMPv2 Community String or SNMPv3 contextName denotes the VRF 'context' and is used to logically separate the MIB module management.
T/F rcVrfTrapEnable	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.5	TruthValue	read-create	This objects is used to enable the generation of the VrfUp and VrfDown traps. true(1) - VRF Traps Enabled false(2) - VRF Traps Disabled
U32 rcVrfMaxRoutes	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.6	Unsigned32	read-create	This object specifies the maximum number of routes that this VRF can support. The default value is 10000.
INT rcVrfAdminStatus	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.7	INTEGER	read-create	The administrative state of the Virtual Router.
VPN rcVrfVpnId	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.8	VPNId	read-create	The Virtual Private Network Identifier of the Virtual Router.
VRF rcVrfRpTrigger	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.9	VrfRpTriggerBitCode	read-create	This object represents Routing Protocol (RP) Triggers on a Virtual Router and it meant to be used to initiate or shutdown routing protocols on a VRF. Multiple RPs can be acted on simultaneously. Also, individual RPs can be brought up in steps, which should not affect the RPs that were running. The BITS represent an Action-code that specifies what action is to be performed for the RPs. The actions are: initiate(1) or shutdown(0). The running status of an RP shall be available in the VRF stats table's rcVrfRpStatus, which has a similar format, but represents the status. Bits 0-3 may be specified in any combination. Individual routing protocols may be enabled and disabled independently. Protocols are enabled by setting the respective BIT and are disabled by resetting the BIT. So, for example, to enable RIP and BGP protocols the rcVrfRpTrigger bits 0 and 2 need to be set, and as encoded as 10100000. All zeros should be interpreted as all protocols disable.
T/F rcVrfMaxRoutesTrapEnable	1.3.6.1.4.1.2272.1.203.1.1.1.2.1.10	TruthValue	read-create	This objects is used to enable the generation of the VRF Max Routes Exceeded traps. true(1) - VRF Max Routes Exceeded Traps Enabled false(2) - VRF Max Routes Exceeded Traps Disabled
rcVrfStat	1.3.6.1.4.1.2272.1.203.1.1.2
rcVrfStatScalars	1.3.6.1.4.1.2272.1.203.1.1.2.1
U32 rcVrfConfiguredVRFs	1.3.6.1.4.1.2272.1.203.1.1.2.1.1	Unsigned32	read-only	The number of VRFs configured on this network element.
U32 rcVrfActiveVRFs	1.3.6.1.4.1.2272.1.203.1.1.2.1.2	Unsigned32	read-only	The number of VRFs that are active on the network element. These are VRFs for which the rcVrfStatOperStatus = up(1)
rcVrfStatTable	1.3.6.1.4.1.2272.1.203.1.1.2.2		not-accessible	This table contains statistics for the Virtual Router.
rcVrfStatEntry	1.3.6.1.4.1.2272.1.203.1.1.2.2.1		not-accessible	Entries in this table are per rcVrfId.
U32 rcVrfStatRouteEntries	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.1	Unsigned32	read-only	Total number of routes for this VRF.
U32 rcVrfStatFIBEntries	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.2	Unsigned32	read-only	Total number of FIB Entries for this VRF.
TIK rcVrfStatUpTime	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.3	TimeTicks	read-only	The time in (in hundredths of a second) since this VRF entry has been operational.
INT rcVrfOperStatus	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.4	INTEGER	read-only	The operational status of the Virtual Router.
VRF rcVrfRpStatus	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.5	VrfRpTriggerBitCode	read-only	This object represents the status of Routing Protocols on this VRF corresponding to the list of RP specified in rcVrfRpTrigger. The BITS represent an Action-code that specifies the status of the RPs. The status are: initiated (1) or shutdown (0). Initiated status is indicated when the respective BIT value is 1 and indicates shutdown when the respective BIT value is 0. Bits 0-3 may appear in any combination to indicate that RPs may be enabled and disabled independently or that multiple RP are acted on simultaneously.
IPt rcVrfRouterAddressType	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.6	InetAddressType	read-only	Router Address Type of this VRF.
IP rcVrfRouterAddress	1.3.6.1.4.1.2272.1.203.1.1.2.2.1.7	InetAddress	read-only	Router Address of this VRF. It is derived from one of the interfaces. If loopback interface is present, the loopback interface address can be used. However, loopback interface is optional.
I32 rcVrfIpVpnTableSize	1.3.6.1.4.1.2272.1.203.1.1.3	Integer32	read-only	Size of Vrf IpVpn Table
rcVrfIpVpnTable	1.3.6.1.4.1.2272.1.203.1.1.4		not-accessible	Table required to configure vpn under ip.
rcVrfIpVpnTableEntry	1.3.6.1.4.1.2272.1.203.1.1.4.1		not-accessible	Entries in this table are per rcVrfId.
OID rcVrfIpVpnVrfId	1.3.6.1.4.1.2272.1.203.1.1.4.1.1	VrfIdentifier	not-accessible	The VrfId serves as the Index for the rcIpVpnVrfTable and also for the rcIpVpnRouteDistinguisherTable. It allows to connect to the vrf table to obtain other attributes like the vrf name, rcVrfMaxRoutesTrapEnable etc.
ENA rcVrfIpVpnStatus	1.3.6.1.4.1.2272.1.203.1.1.4.1.2	EnableValue	read-create	The status of IpVpn.
IDL rcVrfIpVpnImportRTList	1.3.6.1.4.1.2272.1.203.1.1.4.1.3	IdList	read-create	The Import RT list is a list of all the route-targets attached to a particular vrf behaving in the import mode.
IDL rcVrfIpVpnExportRTList	1.3.6.1.4.1.2272.1.203.1.1.4.1.4	IdList	read-create	The Export RT list is a list of all the route-targets attached to a particular vrf in the export mode.
INT rcVrfIpVpnSvcLblAllocOpt	1.3.6.1.4.1.2272.1.203.1.1.4.1.5	INTEGER	read-create	The service label allocation option for the ipvpn
ROW rcVrfIpVpnRowStatus	1.3.6.1.4.1.2272.1.203.1.1.4.1.6	RowStatus	read-create	RowStatus for the Vpn Entry.
I32 rcVrfIpVpnIsidNumber	1.3.6.1.4.1.2272.1.203.1.1.4.1.7	Integer32	read-create	IP VPN I-SID number.Default 0 value indicates that no i-sid has been assinged.
rcVrfNotificationObjects	1.3.6.1.4.1.2272.1.203.1.2
rcVrrpv3	1.3.6.1.4.1.2272.1.206
rcVrrpTmpMib	1.3.6.1.4.1.2272.1.206.1
rcVrrpTmpNotifications	1.3.6.1.4.1.2272.1.206.1.0
NTF rcVrrpTmpTrapNewMaster	1.3.6.1.4.1.2272.1.206.1.0.1			The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
NTF rcVrrpTmpTrapProtoError	1.3.6.1.4.1.2272.1.206.1.0.3			The error trap indicates that the sending agent has encountered the protocol error indicated by rcVrrpTmpTrapProtoErrorReason.
rcVrrpTmpOperations	1.3.6.1.4.1.2272.1.206.1.1
INT rcVrrpTmpNotificationCntl	1.3.6.1.4.1.2272.1.206.1.1.2	INTEGER	read-write	Indicates whether the VRRP-enabled router will generate SNMP notifications for events defined in this MIB. 'Enabled' results in SNMP notifications; 'disabled', no notifications are sent.
rcVrrpTmpOperationsTable	1.3.6.1.4.1.2272.1.206.1.1.7		not-accessible	Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpTmpOperationsEntry' items which describe the operational characteristics of a virtual router.
rcVrrpTmpOperationsEntry	1.3.6.1.4.1.2272.1.206.1.1.7.1		not-accessible	An entry in the rcVrrpTmpOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IP version, VRID and ifIndex. ifIndex represents a physical interface of the router. Note that rows in this table can be distinguished on a multi-stacked device running VRRP over IPv4 and IPv6 on the same physical interface. Rows in the table cannot be modified unless the value of 'rcVrrpTmpOperationsState' has transitioned to 'initialize'
NUM rcVrrpTmpOperationsIfIndex	1.3.6.1.4.1.2272.1.206.1.1.7.1.1	InterfaceIndex	not-accessible	port interface index.
IPt rcVrrpTmpOperationsInetAddrType	1.3.6.1.4.1.2272.1.206.1.1.7.1.2	InetAddressType	not-accessible	The IP address type of RcVrrpTmpOperationsEntry. This value applies to both rcVrrpTmpOperationsMasterIpAddr and rcVrrpTmpOperationsPrimaryIpAddr.
VRI rcVrrpTmpOperationsVrId	1.3.6.1.4.1.2272.1.206.1.1.7.1.3	VrId	not-accessible	This object contains the Virtual Router Identifier (VRID).
MAC rcVrrpTmpOperationsVirtualMacAddr	1.3.6.1.4.1.2272.1.206.1.1.7.1.4	MacAddress	read-only	The virtual MAC address of the virtual router. Although this object can be derived from the 'rcVrrpTmpOperationsVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP notifications.
INT rcVrrpTmpOperationsState	1.3.6.1.4.1.2272.1.206.1.1.7.1.5	INTEGER	read-only	The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router.
I32 rcVrrpTmpOperationsPriority	1.3.6.1.4.1.2272.1.206.1.1.7.1.6	Integer32	read-create	This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es) for VRRP over IPv4 and hence not settable. A 'badValue(3)' should be returned when a user tries to set 0 or 255 for this object.
I32 rcVrrpTmpOperationsAddrCount	1.3.6.1.4.1.2272.1.206.1.1.7.1.7	Integer32	read-only	The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the rcVrrpTmpAssociatedAddrTable that correspond to a given IP version/VRID/ifIndex.
IP rcVrrpTmpOperationsMasterIpAddr	1.3.6.1.4.1.2272.1.206.1.1.7.1.8	InetAddress	read-only	The master router's real IP address. Master router would set this address to rcVrrpTmpOperationsPrimaryIpAddr while transitioning to master state. For backup routers, this is the IP address listed as the source in VRRP advertisement last received by this virtual router.
IP rcVrrpTmpOperationsPrimaryIpAddr	1.3.6.1.4.1.2272.1.206.1.1.7.1.9	InetAddress	read-create	In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will become the rcVrrpTmpOperationsMasterIpAddr', should the virtual router transition from backup state to master.
NUM rcVrrpTmpOperationsAdvInterval	1.3.6.1.4.1.2272.1.206.1.1.7.1.10	TimeInterval	read-create	The time interval, in centiseconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
T/F rcVrrpTmpOperationsPreemptMode	1.3.6.1.4.1.2272.1.206.1.1.7.1.11	TruthValue	read-create	Controls whether a higher priority virtual router will preempt a lower priority master.
T/F rcVrrpTmpOperationsAcceptMode	1.3.6.1.4.1.2272.1.206.1.1.7.1.12	TruthValue	read-create	Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address owner. Default is False. This object is not relevant for rows representing VRRP over IPv4 and should be set to false.
TIM rcVrrpTmpOperationsUpTime	1.3.6.1.4.1.2272.1.206.1.1.7.1.13	TimeStamp	read-only	This is the value of the `sysUpTime' object when this virtual router (i.e., the `rcVrrpTmpOperationsState') transitioned out of `initialized'.
STO rcVrrpTmpOperationsStorageType	1.3.6.1.4.1.2272.1.206.1.1.7.1.14	StorageType	read-create	The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.
ROW rcVrrpTmpOperationsRowStatus	1.3.6.1.4.1.2272.1.206.1.1.7.1.15	RowStatus	read-create	The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `rcVrrpTmpOperationsRowStatus' is set to active(1), no other objects in the conceptual row can be modified. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `rcVrrpTmpOperationsRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of rcVrrpTmpOperationsInetAddrType, rcVrrpTmpOperationsVrId and rcVrrpTmpOperationsPrimaryIpAddr has been set and there is at least one active row in the `rcVrrpTmpAssociatedIpAddrTable' defining an associated IP address. notInService(2) should be used to administratively bring the row down. A typical order of operation to add a row is: 1. Create a row in rcVrrpTmpOperationsTable with createAndWait(5). 2. Create one or more corresponding rows in rcVrrpTmpAssociatedIpAddrTable. 3. Populate the rcVrrpTmpOperationsEntry. 4. set rcVrrpTmpOperationsRowStatus to active(1). A typical order of operation to delete an entry is: 1. Set rcVrrpTmpOperationsRowStatus to notInService(2). 2. Set the corresponding rows in rcVrrpTmpAssociatedIpAddrTable to destroy(6) to delete the entry. 3. set rcVrrpTmpOperationsRowStatus to destroy(6) to delete the entry.
rcVrrpTmpAssociatedIpAddrTable	1.3.6.1.4.1.2272.1.206.1.1.8		not-accessible	The table of addresses associated with this virtual router.
rcVrrpTmpAssociatedIpAddrEntry	1.3.6.1.4.1.2272.1.206.1.1.8.1		not-accessible	An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID and ifIndex will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'rcVrrpTmpOperationsIpAddrCount'). Rows in the table cannot be modified unless the value of `rcVrrpTmpOperationsState' has transitioned to `initialize'.
IP rcVrrpTmpAssociatedIpAddr	1.3.6.1.4.1.2272.1.206.1.1.8.1.1	InetAddress	not-accessible	The assigned IP addresses that a virtual router is responsible for backing up. The size of this object is either 4 or 16 depending on rcVrrpTmpOperationsInetAddrType.
ADR rcVrrpTmpAssociatedIpAddrPrefixLength	1.3.6.1.4.1.2272.1.206.1.1.8.1.2	InetAddressPrefixLength	not-accessible	The length of the prefix (in bits).
STO rcVrrpTmpAssociatedStorageType	1.3.6.1.4.1.2272.1.206.1.1.8.1.3	StorageType	read-create	The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.
ROW rcVrrpTmpAssociatedIpAddrRowStatus	1.3.6.1.4.1.2272.1.206.1.1.8.1.4	RowStatus	read-create	The RowStatus variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Setting this object to active(1) results in the addition of an associated address for a virtual router. Setting this object to notInService(2) results in administratively bringing down the row. Destroying the entry or setting it to destroy(6) removes the associated address from the virtual router. The use of other values is implementation-dependent. Only rcVrrpTmpAssociatedStorageType can be modified when the row is in active(1) state for Implementations supporting write access to rcVrrpTmpAssociatedStorageType Implementations should not allow deletion of the last row corresponding to an active row in rcVrrpTmpOperationsTable. Refer to description of rcVrrpTmpOperationsRowStatus for a typical row creation and deletion scenarios.
INT rcVrrpTmpNewMasterReason	1.3.6.1.4.1.2272.1.206.1.1.9	INTEGER	read-only	This indicates the reason for rcVrrpTmpNewMaster trap. Used by rcVrrpTmpTrapNewMaster trap. The object can be polled if the rcVrrpTmpNewMaster trap is lost to identify the reason for transmission. Backup router should return notmaster(0) when pooled.
INT rcVrrpTmpTrapProtoErrReason	1.3.6.1.4.1.2272.1.206.1.1.10	INTEGER	accessible-for-notify	This indicates the reason for protocol error trap. Used by rcVrrpTmpTrapProtoError trap.
rcVrrpTmpStatistics	1.3.6.1.4.1.2272.1.206.1.2
C32 rcVrrpTmpRouterChecksumErrors	1.3.6.1.4.1.2272.1.206.1.2.1	Counter32	read-only	The total number of VRRP packets received with an invalid VRRP checksum value.
C32 rcVrrpTmpRouterVersionErrors	1.3.6.1.4.1.2272.1.206.1.2.2	Counter32	read-only	The total number of VRRP packets received with an unknown or unsupported version number.
C32 rcVrrpTmpRouterVrIdErrors	1.3.6.1.4.1.2272.1.206.1.2.3	Counter32	read-only	The total number of VRRP packets received with an invalid VRID for this virtual router.
rcVrrpTmpRouterStatisticsTable	1.3.6.1.4.1.2272.1.206.1.2.5		not-accessible	Table of virtual router statistics.
rcVrrpTmpRouterStatisticsEntry	1.3.6.1.4.1.2272.1.206.1.2.5.1		not-accessible	An entry in the table, containing statistics information about a given virtual router.
C32 rcVrrpTmpStatisticsMasterTransitions	1.3.6.1.4.1.2272.1.206.1.2.5.1.1	Counter32	read-only	The total number of times that this virtual router's state has transitioned to MASTER. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsRcvdAdvertisements	1.3.6.1.4.1.2272.1.206.1.2.5.1.2	Counter32	read-only	The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsAdvIntervalErrors	1.3.6.1.4.1.2272.1.206.1.2.5.1.3	Counter32	read-only	The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsIpTtlErrors	1.3.6.1.4.1.2272.1.206.1.2.5.1.4	Counter32	read-only	The total number of VRRP packets received by the Virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsRcvdPriZeroPackets	1.3.6.1.4.1.2272.1.206.1.2.5.1.5	Counter32	read-only	The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsSentPriZeroPackets	1.3.6.1.4.1.2272.1.206.1.2.5.1.6	Counter32	read-only	The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsRcvdInvalidTypePkts	1.3.6.1.4.1.2272.1.206.1.2.5.1.7	Counter32	read-only	The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsAddressListErrors	1.3.6.1.4.1.2272.1.206.1.2.5.1.8	Counter32	read-only	The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsPacketLengthErrors	1.3.6.1.4.1.2272.1.206.1.2.5.1.9	Counter32	read-only	The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of rcVrrpTmpStatisticsDiscontinuityTime.
C32 rcVrrpTmpStatisticsRcvdInvalidAuthentications	1.3.6.1.4.1.2272.1.206.1.2.5.1.10	Counter32	read-only	The total number of packets received with an unknown authentication type.
TIM rcVrrpTmpStatisticsDiscontinuityTime	1.3.6.1.4.1.2272.1.206.1.2.5.1.11	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
I32 rcVrrpTmpStatisticsRefreshRate	1.3.6.1.4.1.2272.1.206.1.2.5.1.12	Integer32	read-only	The minimum reasonable polling interval for this entry. This object provides an indication of the minimum Amount of time required to update the counters in this entry.
rcVrrpExtMib	1.3.6.1.4.1.2272.1.206.2
rcVrrpExtObjects	1.3.6.1.4.1.2272.1.206.2.1
rcVrrpExtScalars	1.3.6.1.4.1.2272.1.206.2.1.1
T/F rcVrrpExtPingVirtualAddrEnable	1.3.6.1.4.1.2272.1.206.2.1.1.1	TruthValue	read-write	Used to configure whether this device should respond to pings directed to a virtual router's IPv6 address.
INT rcVrrpExtVersionNumber	1.3.6.1.4.1.2272.1.206.2.1.1.2	INTEGER	read-only	The version number of Vrrp for IPv6 is 3.
INT rcVrrpExtTrapStateTransitionType	1.3.6.1.4.1.2272.1.206.2.1.1.3	INTEGER	read-only	Potential types of state transitions.Used by rcVrrpv3TrapStateTransition trap.
INT rcVrrpExtTrapStateTransitionCause	1.3.6.1.4.1.2272.1.206.2.1.1.4	INTEGER	read-only	Potential types of causes that will generate a rcVrrpExtTrapStateTransition trap.
VRI rcVrrpExtOperationsVrId	1.3.6.1.4.1.2272.1.206.2.1.1.5	VrId	read-only	This object contains the Virtual Router Identifier (VRID).This is used in rcVrrpExtTrapStateTransition.
rcVrrpExtNotifications	1.3.6.1.4.1.2272.1.206.2.2
NTF rcVrrpExtTrapStateTransition	1.3.6.1.4.1.2272.1.206.2.2.1			A rcVrrpExtTrapStateTransition trap signifies a state transition has occurred on a particular vrrp interface. Implementation of this trap is optional.
rcVrrpExtOperations	1.3.6.1.4.1.2272.1.206.2.3
rcVrrpExtOperationsTable	1.3.6.1.4.1.2272.1.206.2.3.11		not-accessible	Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'rcVrrpExtOperationsEntry'and 'rcVrrpTmpOperationsEntry' items which describe the operational characteristics of a virtual router. This table is an extention of 'rcVrrpTmpOperationsTable'.It contains the mib objects that are Nortel specific.
rcVrrpExtOperationsEntry	1.3.6.1.4.1.2272.1.206.2.3.11.1		not-accessible	An entry in the rcVrrpExtOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IP version, VRID and ifIndex. ifIndex represents a physical interface of the router. Note that rows in this table can be distinguished on a multi-stacked device running VRRP over IPv4 and IPv6 on the same physical interface. Rows in the table cannot be modified unless the value of 'rcVrrpTmpOperationsState' has transitioned to 'initialize'.
INT rcVrrpExtOperationsAction	1.3.6.1.4.1.2272.1.206.2.3.11.1.1	INTEGER	read-create	Used to trigger an action on this vrrp interface.
INT rcVrrpExtOperationsBackUpMaster	1.3.6.1.4.1.2272.1.206.2.3.11.1.2	INTEGER	read-create	Enable the backup VRRP switch traffic forwarding. This will reduce the traffic in IST link in the time of SMLT.
INT rcVrrpExtOperationsBackUpMasterState	1.3.6.1.4.1.2272.1.206.2.3.11.1.3	INTEGER	read-only	Indicate whether backup VRRP switch traffic forwarding is enabled or not.
IP rcVrrpExtOperationsCriticalIpAddr	1.3.6.1.4.1.2272.1.206.2.3.11.1.4	InetAddress	read-create	IP address of the interface that will cause a shutdown event.Only IPv6 address is supported as of now.
T/F rcVrrpExtOperationsCriticalIpAddrEnabled	1.3.6.1.4.1.2272.1.206.2.3.11.1.5	TruthValue	read-create	Indicate if an user-defined critical IP address should be enabled. 'NO' = use the default IP address (::). No effect if an user-defined IP address does not exist.
INT rcVrrpExtOperationsControl	1.3.6.1.4.1.2272.1.206.2.3.11.1.6	INTEGER	read-create	This object will enable/disable the virtual router function. Setting the value to 'enabled', will transition the state of the router from 'initialize to 'backup'; Setting the value to 'disabled', will tranisition the router from 'master' or 'backup' to 'initialize'.
I32 rcVrrpExtOperationsHoldDownTimer	1.3.6.1.4.1.2272.1.206.2.3.11.1.7	Integer32	read-create	Used to configure the amount of time (in seconds) to wait before preempting the current vrrp master.
INT rcVrrpExtOperationsHoldDownState	1.3.6.1.4.1.2272.1.206.2.3.11.1.8	INTEGER	read-only	Used to indicate the hold-down state of this vrrp interface. If the hold-down timer is operational this variable will be set to 'active'. 'dormant' otherwise.
I32 rcVrrpExtOperationsHoldDownTimeRemaining	1.3.6.1.4.1.2272.1.206.2.3.11.1.9	Integer32	read-only	Used to indicate the amount of time (in seconds) left before the rcVrrpExtOperationsHoldDownTimer will expire.
I32 rcVrrpExtOperationsFasterAdvInterval	1.3.6.1.4.1.2272.1.206.2.3.11.1.10	Integer32	read-create	This is the faster advertisement interval, in milliseconds, between sending advertisement messages. When the faster advertisement interval enable is checked, the faster advertisement interval is being used instead of the regular advertisement interval.
T/F rcVrrpExtOperationsFasterAdvIntervalEnabled	1.3.6.1.4.1.2272.1.206.2.3.11.1.11	TruthValue	read-create	Used to indicate if the Faster Advertisement Interval should be used.'Disable' means use regular Advertisement interval.
IP rcVrrpExtOperationsLinkLocalAddr	1.3.6.1.4.1.2272.1.206.2.3.11.1.12	InetAddress	read-create	The assigned Linklocal addresses to the virtual router interface. This mib object support only IPv6 address as of now.
IP rcVrrpExtOperationsGlobalIpAddr	1.3.6.1.4.1.2272.1.206.2.3.11.1.13	InetAddress	read-create	The assigned Global addresses to the virtual router interface. This mib object support only IPv6 address as of now.
rcA1100	1.3.6.1.4.1.2272.2
rcA1250	1.3.6.1.4.1.2272.6
rcA1150	1.3.6.1.4.1.2272.7
rcA1200	1.3.6.1.4.1.2272.8
rcA1050	1.3.6.1.4.1.2272.9
rcA740	1.3.6.1.4.1.2272.20
rcA750	1.3.6.1.4.1.2272.21
rcA790	1.3.6.1.4.1.2272.22
rcA750S	1.3.6.1.4.1.2272.23
rcA8610	1.3.6.1.4.1.2272.30
rcA8606	1.3.6.1.4.1.2272.31
rcA8110	1.3.6.1.4.1.2272.32
rcA8106	1.3.6.1.4.1.2272.33
rcA8603	1.3.6.1.4.1.2272.34
rcA8103	1.3.6.1.4.1.2272.35
rcA8110co	1.3.6.1.4.1.2272.36
rcA8610co	1.3.6.1.4.1.2272.37
rcBayStack	1.3.6.1.4.1.2272.40
rcA1424	1.3.6.1.4.1.2272.42
rcA1648	1.3.6.1.4.1.2272.43
rcA1612	1.3.6.1.4.1.2272.44
rcA1624	1.3.6.1.4.1.2272.45
rcRBS2402	1.3.6.1.4.1.2272.46
rcAtr8310	1.3.6.1.4.1.2272.47
rcAtr8306	1.3.6.1.4.1.2272.48
rcAtr8010	1.3.6.1.4.1.2272.49
rcAtr8006	1.3.6.1.4.1.2272.50
rcA8603r	1.3.6.1.4.1.2272.55
rcERS8603r	1.3.6.1.4.1.2272.56
rcA8803r	1.3.6.1.4.1.2272.57
rcA8806	1.3.6.1.4.1.2272.58
rcA8810	1.3.6.1.4.1.2272.59
rcA8810co	1.3.6.1.4.1.2272.60
rcVSP9012	1.3.6.1.4.1.2272.201
rcA8003	1.3.6.1.4.1.2272.280887555
rcA8006	1.3.6.1.4.1.2272.280887558
rcA8010	1.3.6.1.4.1.2272.280887562
rcA8010co	1.3.6.1.4.1.2272.1623064842
snmpV2	1.3.6.1.6
snmpModules	1.3.6.1.6.3
snmpMIB	1.3.6.1.6.3.1
snmpMIBObjects	1.3.6.1.6.3.1.1
snmpTraps	1.3.6.1.6.3.1.1.5

6,485 OIDs total — showing 6,079-6,485 (page 3 of 3)

« Prev Page 3 of 3