All MIBs › RAPID-CITY › rcMplsLdpInterfaceConfHoldTime
rcMplsLdpInterfaceConfHoldTime
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcMplsLdpInterfaceConfHoldTime
OID (numeric): 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description:
This is the configured hello hold time.
What is rcMplsLdpInterfaceConfHoldTime?
This object specifies the configured hello hold time on an MPLS LDP interface, which determines how long a neighbor is considered active after receiving its last hello message. If no hello is received within this time, the neighbor is assumed down. An operator would adjust this based on link quality and convergence requirements, balancing quick failure detection against sensitivity to temporary network glitches.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 snmpwalk -v2c -c public <target> RAPID-CITY::rcMplsLdpInterfaceConfHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4.1 snmpget -v2c -c public <target> RAPID-CITY::rcMplsLdpInterfaceConfHoldTime.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74 | rcMpls | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1 | rcMplsMib | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1 | rcMplsObjects | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3 | rcMplsLdpGroup | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7 | rcMplsLdpInterfaceTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1 | rcMplsLdpInterfaceEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.74.1.1.3.7.1.4 | rcMplsLdpInterfaceConfHoldTime | RAPID-CITY |