All MIBs › RAPID-CITY › rc2kAtm1483ElanInArpSendInterval
rc2kAtm1483ElanInArpSendInterval
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rc2kAtm1483ElanInArpSendInterval
OID (numeric): 1.3.6.1.4.1.2272.1.100.9.5.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description:
interval of arp sending on the port, if ConnectType is ip(2)
What is rc2kAtm1483ElanInArpSendInterval?
This object specifies how often ARP (Address Resolution Protocol) requests are sent on an ATM port configured for IP connectivity (when ConnectType is ip(2)). The value is measured in seconds (0-60), and operators adjust it to control the frequency of ARP discovery traffic and IP address resolution latency on ATM-based ELAN connections. A value of 0 typically disables ARP sending on that interface.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.100.9.5.1.13 snmpwalk -v2c -c public <target> RAPID-CITY::rc2kAtm1483ElanInArpSendInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.100.9.5.1.13.1 snmpget -v2c -c public <target> RAPID-CITY::rc2kAtm1483ElanInArpSendInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.100.9.5.1.13.1 i <value>
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100 | rc2k | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.9 | rc2kAtm | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.9.5 | rc2kAtm1483ElanTable | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.9.5.1 | rc2kAtm1483ElanEntry | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.100.9.5.1.13 | rc2kAtm1483ElanInArpSendInterval | RAPID-CITY |