All MIBs › RAPID-CITY › rcKhiHighLevelKhiOperStatus
rcKhiHighLevelKhiOperStatus
Module: RAPID-CITY
OID (symbolic): RAPID-CITY::rcKhiHighLevelKhiOperStatus
OID (numeric): 1.3.6.1.4.1.2272.1.85.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description:
Indicate if the KHI feature is on(1), off(2) or wait(3). running (1) means KHI is enabled and running. off(2) means KHI is disabled wait(3) means KHI is enabled but it is not running yet. At beginning of system boot up, KHI can be set to wait for start time (rcKhiHighLevelKhiStartTime) to experied then start the KHI monitor the system. This allows the system fully up and start the KHI info. When Operation Status is off or wait, all KHI status will not be valid
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.85.2.1 snmpwalk -v2c -c public <target> RAPID-CITY::rcKhiHighLevelKhiOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.85.2.1.1 snmpget -v2c -c public <target> RAPID-CITY::rcKhiHighLevelKhiOperStatus.1
OID Breakdown
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | BIANCA-BRICK-PPP-MIB |
| 1.3.6 | dod | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1 | internet | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4 | private | BIANCA-BRICK-PPP-MIB |
| 1.3.6.1.4.1 | enterprises | ANIROOT-MIB |
| 1.3.6.1.4.1.2272 | rapidCity | RAPID-CITY |
| 1.3.6.1.4.1.2272.1 | rcMgmt | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.85 | rcKhi | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.85.2 | rcKhiHighLevel | RAPID-CITY |
| 1.3.6.1.4.1.2272.1.85.2.1 | rcKhiHighLevelKhiOperStatus | RAPID-CITY |