RAPID-CITY :: rcOspfv3IfMetricValue

MIB Reference — IPNetwork Monitor

All MIBsRAPID-CITYrcOspfv3IfMetricValue

rcOspfv3IfMetricValue

Module: RAPID-CITY

OID (symbolic): RAPID-CITY::rcOspfv3IfMetricValue

OID (numeric): 1.3.6.1.4.1.2272.1.67.1.1.7.1.20

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description:

The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the rcOspfv3ReferenceBandwidth object. A value of '0' means the metric value of this interface will depend on the speed of the interface, when the state of the interface is up. The default (0) metric for Vlan and Tunnel is 10.

What is rcOspfv3IfMetricValue?

Sets OSPFv3 routing metric for a network interface, influencing IPv6 route selection. Automatically calculated from interface speed when set to zero. Operators adjust this to guide traffic along preferred paths.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2272.1.67.1.1.7.1.20
snmpwalk -v2c -c public <target> RAPID-CITY::rcOspfv3IfMetricValue

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.2272.1.67.1.1.7.1.20.1
snmpget -v2c -c public <target> RAPID-CITY::rcOspfv3IfMetricValue.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.2272.1.67.1.1.7.1.20.1 i <value>

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.2272rapidCityRAPID-CITY
1.3.6.1.4.1.2272.1rcMgmtRAPID-CITY
1.3.6.1.4.1.2272.1.67rcOspfv3RAPID-CITY
1.3.6.1.4.1.2272.1.67.1rcOspfv3MibRAPID-CITY
1.3.6.1.4.1.2272.1.67.1.1rcOspfv3ObjectsRAPID-CITY
1.3.6.1.4.1.2272.1.67.1.1.7rcOspfv3IfTableRAPID-CITY
1.3.6.1.4.1.2272.1.67.1.1.7.1rcOspfv3IfEntryRAPID-CITY
1.3.6.1.4.1.2272.1.67.1.1.7.1.20rcOspfv3IfMetricValueRAPID-CITY