All MIBs › AC-GATEWAY-MIB
Organization: AudioCodes Ltd
Last Updated: 2010-03-16
Category: Telephony and VoIP, Vendor: AudioCodes
Description: Provides system-level gateway management objects for AudioCodes media gateways, covering device identification, operational mode, and gateway-wide configuration.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AC-GATEWAY-MIB?
AC-GATEWAY-MIB is an AudioCodes proprietary MIB configuring trunk-group and channel assignment on AudioCodes media gateways. Its channels table, keyed by index, records a row-status-controlled action/result, trunk ID, starting/last channel, starting phone number, trunk-group ID, profile ID, and module, while a trunk-group-settings table configures each trunk group's channel-select mode, registration mode, and gateway name, alongside a global channel-selection-mode setting. As a configuration MIB it lets an administrator confirm which channels are assigned to a given trunk group and its channel-selection behavior. It is deployed on AudioCodes media gateways. Engineers can download the AC-GATEWAY-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AC-GATEWAY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- AudioCodes media gateways
Monitoring Examples
An administrator checks trunkGroupSettingsChannelSelectMode to confirm a trunk group is allocating channels in the expected order before troubleshooting call-routing issues on an AudioCodes gateway.
What Can Be Monitored
- trunk group and channel assignment configuration
This MIB depends on
Related MIBs
Imported Objects
From AUDIOCODES-TYPES-MIB
| acBoardMibs | OBJECT-IDENTITY |
| acGeneric | OBJECT-IDENTITY |
| acProducts | OBJECT-IDENTITY |
| acRegistrations | OBJECT-IDENTITY |
| audioCodes | OBJECT-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From RFC1155-SMI
| IpAddress |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowPointer | |
| RowStatus | |
| TAddress | |
| TEXTUAL-CONVENTION |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| acGateway | 1.3.6.1.4.1.5003.9.10.3 | |||
| gwConfiguration | 1.3.6.1.4.1.5003.9.10.3.1 | |||
| common | 1.3.6.1.4.1.5003.9.10.3.1.1 | |||
| channelsSetting | 1.3.6.1.4.1.5003.9.10.3.1.1.1 | |||
| INT channelsSettingSelectMode | 1.3.6.1.4.1.5003.9.10.3.1.1.1.1 | INTEGER | read-write | Default method to use for trunk B-channel allocation (IP to Tel calls). Access: Instant. AC INI-Param: CHANNELSELECTMODE |
| channelsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21 | not-accessible | The table defines trunk/hunt groups and phone numbers for gateway endpoints. The endpoints that aren't defined will be disabled. | |
| channelsEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1 | not-accessible | ||
| U32 channelsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.1 | Unsigned32 | not-accessible | Channel numbers, starting at 0. AC INI-Param: TrunkGroup_Index |
| ROW channelsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT channelsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT channelsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 channelsTrunkID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.5 | Unsigned32 | read-create | Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_FirstTrunkId |
| U32 channelsStartingCh | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.6 | Unsigned32 | read-create | Starting Channel for this trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_FirstBChannel |
| U32 channelsLastCh | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.7 | Unsigned32 | read-create | Last Channel for the trunk/hunt group. Access: Instant. AC INI-Param: TrunkGroup_LastBChannel |
| STR channelsStartingPhoneNum | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.8 | SnmpAdminString | read-create | Starting Phone Number. Access: Instant. AC INI-Param: TrunkGroup_FirstPhoneNumber |
| U32 channelsTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.9 | Unsigned32 | read-create | Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_TrunkGroupNum |
| U32 channelsProfileID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.10 | Unsigned32 | read-create | Profile ID. Access: Instant. AC INI-Param: TrunkGroup_ProfileId |
| U32 channelsLastTrunkID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.11 | Unsigned32 | read-create | Last Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroup_LastTrunkId |
| U32 channelsModule | 1.3.6.1.4.1.5003.9.10.3.1.1.1.21.1.12 | Unsigned32 | read-create | Channels Module. Access: Instant. AC INI-Param: TrunkGroup_Module |
| trunkGroupSettingsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22 | not-accessible | The table defines trunk/hunt groups configuration | |
| trunkGroupSettingsEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1 | not-accessible | ||
| U32 trunkGroupSettingsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.1 | Unsigned32 | not-accessible | Trunk numbers, starting at 0. AC INI-Param: TrunkGroupSettings_Index |
| ROW trunkGroupSettingsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT trunkGroupSettingsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT trunkGroupSettingsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 trunkGroupSettingsTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.5 | Unsigned32 | read-create | Trunk/Hunt group ID. Access: Instant. AC INI-Param: TrunkGroupSettings_TrunkGroupId |
| INT trunkGroupSettingsChannelSelectMode | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.6 | INTEGER | read-create | Selects the next available (free) Gateway port, FXO/PSTN: affects outgoing calls chanel selection FXS:affects incoming call channel selection. Access: Instant. AC INI-Param: TrunkGroupSettings_ChannelSelectMode |
| INT trunkGroupSettingsRegistrationMode | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.7 | INTEGER | read-create | Access: Instant. AC INI-Param: TrunkGroupSettings_RegistrationMode |
| STR trunkGroupSettingsGatewayName | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.8 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: TrunkGroupSettings_GatewayName |
| STR trunkGroupSettingsContactUser | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.9 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: TrunkGroupSettings_ContactUser |
| I32 trunkGroupSettingsServingIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.10 | Integer32 | read-create | Access: Instant. AC INI-Param: TrunkGroupSettings_ServingIPGroup |
| INT trunkGroupSettingsMwiInterrogationType | 1.3.6.1.4.1.5003.9.10.3.1.1.1.22.1.11 | INTEGER | read-create | Access: Instant. AC INI-Param: TrunkGroupSettings_MWIInterrogationType |
| manipulationAndRouting | 1.3.6.1.4.1.5003.9.10.3.1.1.2 | |||
| INT manipulationAndRoutingModeTel2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.2.1 | INTEGER | read-write | Defines order between routing incoming calls from Tel side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODETEL2IP |
| INT manipulationAndRoutingModeIp2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.2.2 | INTEGER | read-write | Defines order between routing incoming calls from IP side and performing manipulations. Access: Instant. AC INI-Param: ROUTEMODEIP2TEL |
| INT manipulationAndRoutingFilterCalls2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.2.3 | INTEGER | read-write | When Gatekeeper/Proxy is enabled, do not start session if called number is not listed or restricted in Tel to IP routing table. Access: Instant. AC INI-Param: FILTERCALLS2IP |
| INT manipulationAndRoutingAltRoutingTel2IpEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.4 | INTEGER | read-write | Enable Tel to IP Alternative Routing. Can be enabled for status only without affecting routing. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPENABLE |
| INT manipulationAndRoutingAltRoutingTel2IpMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.5 | INTEGER | read-write | Methods used for Alternative Routing operation. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPMODE |
| U32 manipulationAndRoutingAltRoutingTel2IpQosAllowTheNCall | 1.3.6.1.4.1.5003.9.10.3.1.1.2.6 | Unsigned32 | read-write | in case of QOS problem, a call has this probability (in percents) to continue, in order to reevaluate the QOS. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPQOSALLOWPROB |
| INT manipulationAndRoutingPreferRouteTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.7 | INTEGER | read-write | Prefer Routing Table. Access: Instant. AC INI-Param: PREFERROUTETABLE |
| INT manipulationAndRoutingRedundantRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.8 | INTEGER | read-write | Mode of redundant routing. 0 - Disabled, 1 - Use routing table, 2 - Use proxies list. Access: Instant. AC INI-Param: REDUNDANTROUTINGMODE |
| INT manipulationAndRoutingAltRoutingTel2IpConnMethod | 1.3.6.1.4.1.5003.9.10.3.1.1.2.9 | INTEGER | read-write | Tel to IP Alternative Routing Connectivity Method. Access: Instant. AC INI-Param: ALTROUTINGTEL2IPCONNMETHOD |
| INT manipulationAndRoutingSIPReRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.10 | INTEGER | read-write | Defines the routing mode after receiving 3xx response or transfer 0 - standard mode 1 - send invite to proxy 2 - use routing table. Access: Instant. AC INI-Param: SIPREROUTINGMODE |
| U32 manipulationAndRoutingAltRoutingToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.2.11 | Unsigned32 | read-write | Alternative Routing Tone Duration. 0 - disabled (milliseconds). Access: Instant. AC INI-Param: ALTROUTINGTONEDURATION |
| U32 manipulationAndRoutingAltRoutingTel2IpKeepAliveTime | 1.3.6.1.4.1.5003.9.10.3.1.1.2.12 | Unsigned32 | read-write | Time interval between OPTIONS Keep-Alive messages for IP connectivity (seconds). Access: Instant. AC INI-Param: ALTROUTINGTEL2IPKEEPALIVETIME |
| routing | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20 | |||
| tel2IPRoutingTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1 | not-accessible | Phone prefix to IP address routing table. The table is used for routing incoming PSTN to IP calls, if Gatekeeper is not used. | |
| tel2IPRoutingEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1 | not-accessible | ||
| U32 tel2IPRoutingIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: PREFIX_Index |
| ROW tel2IPRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT tel2IPRoutingAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT tel2IPRoutingActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR tel2IPRoutingPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.5 | SnmpAdminString | read-create | Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_DestinationPrefix |
| STR tel2IPRoutingAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.6 | SnmpAdminString | read-create | Address (IP or DNS name). Access: Instant. AC INI-Param: PREFIX_DestAddress |
| STR tel2IPRoutingSrcPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.7 | SnmpAdminString | read-create | Calling Phone number prefix. up to 50 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PREFIX_SourcePrefix |
| I32 tel2IPRoutingProfileID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.8 | Integer32 | read-create | Profile ID. Access: Instant. AC INI-Param: PREFIX_ProfileId |
| U32 tel2IPRoutingChargeCode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.9 | Unsigned32 | read-create | Charge code to use for generating metering tones. Access: Instant. AC INI-Param: PREFIX_MeteringCode |
| U32 tel2IPRoutingDestPort | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.10 | Unsigned32 | read-create | Destination port. Access: Instant. AC INI-Param: PREFIX_DestPort |
| I32 tel2IPRoutingSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.11 | Integer32 | read-create | Access: Instant. AC INI-Param: PREFIX_SrcIPGroupID |
| STR tel2IPRoutingDestHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.12 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: PREFIX_DestHostPrefix |
| I32 tel2IPRoutingDestIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.13 | Integer32 | read-create | Access: Instant. AC INI-Param: PREFIX_DestIPGroupID |
| STR tel2IPRoutingSourceHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.14 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: PREFIX_SrcHostPrefix |
| INT tel2IPRoutingTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.15 | INTEGER | read-create | Access: Instant. AC INI-Param: PREFIX_TransportType |
| I32 tel2IPRoutingSourceTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.1.1.16 | Integer32 | read-create | Access: Instant. AC INI-Param: PREFIX_SrcTrunkGroupID |
| iP2TelRoutingTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2 | not-accessible | Phone prefix to Trunk group (or Hunt Group for MP-1xx)routing table. The table is used for routing outgoing IP Telco calls, according to received from IP destination phone number. | |
| iP2TelRoutingEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1 | not-accessible | ||
| U32 iP2TelRoutingIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: PstnPrefix_Index |
| ROW iP2TelRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT iP2TelRoutingAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT iP2TelRoutingActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR iP2TelRoutingPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.5 | SnmpAdminString | read-create | Phone number prefix. up to 80 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_DestPrefix |
| U32 iP2TelRoutingTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.6 | Unsigned32 | read-create | Trunk/Hunt group ID. Access: Instant. AC INI-Param: PstnPrefix_TrunkGroupId |
| STR iP2TelRoutingSrcPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.7 | SnmpAdminString | read-create | Calling Phone number prefix. up to 49 digits. can be used for defining range of phone numbers. Access: Instant. AC INI-Param: PstnPrefix_SourcePrefix |
| STR iP2TelRoutingAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.8 | SnmpAdminString | read-create | Address (IP or DNS name). Access: Instant. AC INI-Param: PstnPrefix_SourceAddress |
| U32 iP2TelRoutingProfileID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.9 | Unsigned32 | read-create | Profile ID. Access: Instant. AC INI-Param: PstnPrefix_ProfileId |
| I32 iP2TelRoutingSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.10 | Integer32 | read-create | Access: Instant. AC INI-Param: PstnPrefix_SrcIPGroupID |
| STR iP2TelRoutingDestHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.11 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: PstnPrefix_DestHostPrefix |
| STR iP2TelRoutingSourceHostPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.2.1.12 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: PstnPrefix_SrcHostPrefix |
| dnsInfoTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3 | not-accessible | ||
| dnsInfoEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1 | not-accessible | ||
| U32 dnsInfoIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: Dns2Ip_Index |
| ROW dnsInfoRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT dnsInfoAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT dnsInfoActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR dnsInfoDomainName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.5 | SnmpAdminString | read-create | Domain Name. Access: Instant. AC INI-Param: Dns2Ip_DomainName |
| STR dnsInfoFirstIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.6 | SnmpAdminString | read-create | IP Address. Access: Instant. AC INI-Param: Dns2Ip_FirstIpAddress |
| STR dnsInfoSecondIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.7 | SnmpAdminString | read-create | IP Address. Access: Instant. AC INI-Param: Dns2Ip_SecondIpAddress |
| STR dnsInfoThirdIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.8 | SnmpAdminString | read-create | IP Address. Access: Instant. AC INI-Param: Dns2Ip_ThirdIpAddress |
| STR dnsInfoFourthIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.3.1.9 | SnmpAdminString | read-create | IP Address. Access: Instant. AC INI-Param: Dns2Ip_FourthIpAddress |
| srvInfoTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4 | not-accessible | ||
| srvInfoEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1 | not-accessible | ||
| U32 srvInfoIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: Srv2Ip_Index |
| U32 srvInfoRecordNum | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.2 | Unsigned32 | not-accessible | Equals to the entry number. AC INI-Param: Srv2Ip_Index |
| ROW srvInfoRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.3 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT srvInfoAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT srvInfoActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.5 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR srvInfoInternalDomainName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.6 | SnmpAdminString | read-create | the Domain name for the SRV query. Access: Instant. AC INI-Param: Srv2Ip_InternalDomain |
| INT srvInfoTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.7 | INTEGER | read-create | the transport type. Access: Instant. AC INI-Param: Srv2Ip_TransportType |
| STR srvInfoDNSName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.8 | SnmpAdminString | read-create | the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns1 |
| U32 srvInfoPriority | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.9 | Unsigned32 | read-create | the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority1 |
| U32 srvInfoWeight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.10 | Unsigned32 | read-create | the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight1 |
| U32 srvInfoPort | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.11 | Unsigned32 | read-create | the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port1 |
| STR srvInfoDNSName2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.12 | SnmpAdminString | read-create | the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns2 |
| U32 srvInfoPriority2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.13 | Unsigned32 | read-create | the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority2 |
| U32 srvInfoWeight2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.14 | Unsigned32 | read-create | the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight2 |
| U32 srvInfoPort2 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.15 | Unsigned32 | read-create | the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port2 |
| STR srvInfoDNSName3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.16 | SnmpAdminString | read-create | the DNS in the SRV Query Result. Access: Instant. AC INI-Param: Srv2Ip_Dns3 |
| U32 srvInfoPriority3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.17 | Unsigned32 | read-create | the Priority of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Priority3 |
| U32 srvInfoWeight3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.18 | Unsigned32 | read-create | the Weight of this SRV Query. Access: Instant. AC INI-Param: Srv2Ip_Weight3 |
| U32 srvInfoPort3 | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.4.1.19 | Unsigned32 | read-create | the port of the DNS. Access: Instant. AC INI-Param: Srv2Ip_Port3 |
| forwardOnBusyTrunkDestTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5 | not-accessible | GwApp Forward On Busy Trunk Destination Table | |
| forwardOnBusyTrunkDestEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1 | not-accessible | ||
| U32 forwardOnBusyTrunkDestIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: ForwardOnBusyTrunkDest_Index |
| ROW forwardOnBusyTrunkDestRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT forwardOnBusyTrunkDestAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT forwardOnBusyTrunkDestActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 forwardOnBusyTrunkDestTrunkGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.5 | Unsigned32 | read-create | GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_TrunkGroupId |
| STR forwardOnBusyTrunkDestForwardDestination | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.5.1.6 | SnmpAdminString | read-create | GwApp Forward On Busy Trunk Destination Table. Access: Instant. AC INI-Param: ForwardOnBusyTrunkDest_ForwardDestination |
| altRouteCause | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10 | |||
| altRouteCauseIP2TELTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21 | not-accessible | ||
| altRouteCauseIP2TELEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1 | not-accessible | ||
| U32 altRouteCauseIP2TELIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: AltRouteCauseIp2Tel_Index |
| ROW altRouteCauseIP2TELRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT altRouteCauseIP2TELAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT altRouteCauseIP2TELActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 altRouteCauseIP2TELReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.21.1.5 | Unsigned32 | read-create | Release Cause. Access: Instant. AC INI-Param: AltRouteCauseIp2Tel_ReleaseCause |
| altRouteCauseTEL2IPTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22 | not-accessible | ||
| altRouteCauseTEL2IPEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1 | not-accessible | ||
| U32 altRouteCauseTEL2IPIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: AltRouteCauseTel2Ip_Index |
| ROW altRouteCauseTEL2IPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT altRouteCauseTEL2IPAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT altRouteCauseTEL2IPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 altRouteCauseTEL2IPReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.10.22.1.5 | Unsigned32 | read-create | Release Cause. Access: Instant. AC INI-Param: AltRouteCauseTel2Ip_ReleaseCause |
| INT routingEnableDigitDelivery2IP | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.21 | INTEGER | read-write | Enable automatic digit delivery to IP side after call is connected. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY2IP |
| INT routingSourceIPAddressInput | 1.3.6.1.4.1.5003.9.10.3.1.1.2.20.22 | INTEGER | read-write | Decides the origin of the source ip address looked at when routing using the IP --> Tel table. 0 - Contact 1 - Recieved packet source IP address. Access: Instant. AC INI-Param: SOURCEIPADDRESSINPUT |
| manipulation | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21 | |||
| INT manipulationRemovePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.1 | INTEGER | read-write | Remove prefix defined in IP to Trunk Group table (IP to Tel calls). Access: Instant. AC INI-Param: REMOVEPREFIX |
| INT manipulationAddTrunkGroupAsPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.2 | INTEGER | read-write | Add Trunk Group ID on which the call was received as the called number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIX |
| INT manipulationAddPortAsPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.3 | INTEGER | read-write | Add port number (Analog gateway) / Trunk ID (Digital gateway) as called number prefix. Access: Instant. AC INI-Param: ADDPORTASPREFIX |
| INT manipulationReplaceEmptyDstWithPortNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.4 | INTEGER | read-write | Replace empty destination number (received from Tel side) with port number. Access: Instant. AC INI-Param: REPLACEEMPTYDSTWITHPORTNUMBER |
| INT manipulationCIDNotification | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.5 | INTEGER | read-write | If NO PRESENTATION arrived from PSTN and this parameter enabled,than the presentation will be allowed. If this parameter disabled, the, presentation will be restricted. Access: Instant. AC INI-Param: CIDNOTIFICATION |
| INT manipulationUseSourceNumberAsDisplayName | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.6 | INTEGER | read-write | if set to 1 Use source number as display name if empty. if set to 2 always use source number as display name . Access: Instant. AC INI-Param: USESOURCENUMBERASDISPLAYNAME |
| INT manipulationAddNPIandTON2CalledNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.7 | INTEGER | read-write | Add NPI and TON as prefix to called number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLEDNUMBER |
| INT manipulationAddNPIandTON2CallingNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.8 | INTEGER | read-write | Add NPI and TON as prefix to calling number. Access: Instant. AC INI-Param: ADDNPIANDTON2CALLINGNUMBER |
| INT manipulationUseDisplayNameAsSourceNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.9 | INTEGER | read-write | when set to 1 then If display name exists, use it as source number. If not, set presentation as restricted. Access: Instant. AC INI-Param: USEDISPLAYNAMEASSOURCENUMBER |
| STR manipulationAddPrefixToRedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.10 | SnmpAdminString | read-write | Prefix which added to redirect phone number. Access: Instant. AC INI-Param: PREFIX2REDIRECTNUMBER |
| INT manipulationAddPhoneContextAsPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.11 | INTEGER | read-write | add the phone context to src/dest phone number as prefix. Access: Instant. AC INI-Param: ADDPHONECONTEXTASPREFIX |
| INT manipulationBlindTransferAddPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.12 | INTEGER | read-write | Add keying sequence for performing blind transfer as transfer number prefix. Access: Instant. AC INI-Param: KEYBLINDTRANSFERADDPREFIX |
| INT manipulationSourceMode | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.13 | INTEGER | read-write | Describes the headers containing source number after manipulation: (0) both FROM and P-Asserted contain src number after manipulations (1) only FROM contains src number after manipulation. Access: Instant. AC INI-Param: SOURCEMANIPULATIONMODE |
| INT manipulationAddTrunkGroupAsPrefixToSource | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.14 | INTEGER | read-write | Add Trunk Group ID on which the call was received as the calling number prefix. Access: Instant. AC INI-Param: ADDTRUNKGROUPASPREFIXTOSOURCE |
| INT manipulationSetTel2IpRedirectReason | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.15 | INTEGER | read-write | If redirect (diversion) data is received from the PSTN interface, the redirect reason is set to the value of this parameter, before transferring it to the IP. default value is -1 --> not change the received value. . Access: Instant. AC INI-Param: SetTel2IpRedirectReason |
| INT manipulationSetIp2TelRedirectReason | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.16 | INTEGER | read-write | If redirect (diversion) data is received from the IP side, the redirect reason is set to the value of this parameter, before transferring it to the PSTN interface. default value is -1 --> not change the received value. . Access: Instant. AC INI-Param: SetIp2TelRedirectReason |
| INT manipulationSetIp2TelRedirectScreeningIndicator | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.17 | INTEGER | read-write | Override screening indicator value of the redirect number in Setup messages to PSTN interface. Access: Instant. AC INI-Param: SetIp2TelRedirectScreeningInd |
| dstIP2TELTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21 | not-accessible | ||
| dstIP2TELEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1 | not-accessible | ||
| U32 dstIP2TELIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.1 | Unsigned32 | not-accessible | Destination number, starting at 0. AC INI-Param: NumberMapIp2Tel_Index |
| ROW dstIP2TELRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT dstIP2TELAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT dstIP2TELActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR dstIP2TELPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: NumberMapIp2Tel_DestinationPrefix |
| U32 dstIP2TELNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.6 | Unsigned32 | read-create | Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromLeft |
| STR dstIP2TELPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.7 | SnmpAdminString | read-create | Prefix to Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Prefix2Add |
| U32 dstIP2TELNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.8 | Unsigned32 | read-create | Number of digits to leave. Access: Instant. AC INI-Param: NumberMapIp2Tel_LeaveFromRight |
| INT dstIP2TELNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.9 | INTEGER | read-create | Number Plan. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberPlan |
| INT dstIP2TELNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.10 | INTEGER | read-create | Number Type. Access: Instant. AC INI-Param: NumberMapIp2Tel_NumberType |
| STR dstIP2TELSourcePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.11 | SnmpAdminString | read-create | Source Prefix. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourcePrefix |
| STR dstIP2TELSourceIP | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.12 | SnmpAdminString | read-create | Source IP. Access: Instant. AC INI-Param: NumberMapIp2Tel_SourceAddress |
| U32 dstIP2TELNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.13 | Unsigned32 | read-create | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapIp2Tel_RemoveFromRight |
| STR dstIP2TELSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.14 | SnmpAdminString | read-create | Suffix To Add. Access: Instant. AC INI-Param: NumberMapIp2Tel_Suffix2Add |
| U32 dstIP2TELIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.21.1.15 | Unsigned32 | read-create | Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapIp2Tel_IsPresentationRestricted |
| dstTEL2IPTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22 | not-accessible | ||
| dstTEL2IPEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1 | not-accessible | ||
| U32 dstTEL2IPIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.1 | Unsigned32 | not-accessible | Destination number, starting at 0. AC INI-Param: NumberMapTel2Ip_Index |
| ROW dstTEL2IPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT dstTEL2IPAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT dstTEL2IPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR dstTEL2IPPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: NumberMapTel2Ip_DestinationPrefix |
| U32 dstTEL2IPNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.6 | Unsigned32 | read-create | Num of stripped digits. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromLeft |
| STR dstTEL2IPPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.7 | SnmpAdminString | read-create | Prefix to Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Prefix2Add |
| U32 dstTEL2IPNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.8 | Unsigned32 | read-create | Number of digits to leave. Access: Instant. AC INI-Param: NumberMapTel2Ip_LeaveFromRight |
| INT dstTEL2IPNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.9 | INTEGER | read-create | Number Plan. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberPlan |
| INT dstTEL2IPNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.10 | INTEGER | read-create | Number Type. Access: Instant. AC INI-Param: NumberMapTel2Ip_NumberType |
| STR dstTEL2IPSourcePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.11 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: NumberMapTel2Ip_SourcePrefix |
| U32 dstTEL2IPNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.12 | Unsigned32 | read-create | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: NumberMapTel2Ip_RemoveFromRight |
| STR dstTEL2IPSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.13 | SnmpAdminString | read-create | Suffix To Add. Access: Instant. AC INI-Param: NumberMapTel2Ip_Suffix2Add |
| U32 dstTEL2IPIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.14 | Unsigned32 | read-create | Is Presentation Restricted. Access: Instant. AC INI-Param: NumberMapTel2Ip_IsPresentationRestricted |
| STR dstTEL2IPSourceIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.15 | SnmpAdminString | read-create | Source Address. Access: Instant. AC INI-Param: NumberMapTel2Ip_SourceAddress |
| I32 dstTEL2IPSourceTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.16 | Integer32 | read-create | GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcTrunkGroupID |
| I32 dstTEL2IPSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.22.1.17 | Integer32 | read-create | GwApp Tel-to-IP Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapTel2Ip_SrcIPGroupID |
| srcIP2TELTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23 | not-accessible | ||
| srcIP2TELEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1 | not-accessible | ||
| U32 srcIP2TELIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.1 | Unsigned32 | not-accessible | Source number, starting at 0. AC INI-Param: SourceNumberMapIp2Tel_Index |
| ROW srcIP2TELRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT srcIP2TELAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT srcIP2TELActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR srcIP2TELPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourcePrefix |
| U32 srcIP2TELNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.6 | Unsigned32 | read-create | Num of stripped digits. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromLeft |
| STR srcIP2TELPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.7 | SnmpAdminString | read-create | Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Prefix2Add |
| U32 srcIP2TELNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.8 | Unsigned32 | read-create | Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_LeaveFromRight |
| INT srcIP2TELNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.9 | INTEGER | read-create | Number Plan. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberPlan |
| INT srcIP2TELNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.10 | INTEGER | read-create | Number Type. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_NumberType |
| STR srcIP2TELDestPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.11 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_DestinationPrefix |
| INT srcIP2TELPresentation | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.12 | INTEGER | read-create | Presentation. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_IsPresentationRestricted |
| U32 srcIP2TELNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.13 | Unsigned32 | read-create | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_RemoveFromRight |
| STR srcIP2TELSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.14 | SnmpAdminString | read-create | Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_Suffix2Add |
| STR srcIP2TELSourceIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.23.1.15 | SnmpAdminString | read-create | Source Address. Access: Instant. AC INI-Param: SourceNumberMapIp2Tel_SourceAddress |
| srcTEL2IPTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24 | not-accessible | ||
| srcTEL2IPEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1 | not-accessible | ||
| U32 srcTEL2IPIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.1 | Unsigned32 | not-accessible | Source number, starting at 0. AC INI-Param: SourceNumberMapTel2Ip_Index |
| ROW srcTEL2IPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT srcTEL2IPAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT srcTEL2IPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR srcTEL2IPPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourcePrefix |
| U32 srcTEL2IPNumOfStrippedDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.6 | Unsigned32 | read-create | Num of stripped digits, Remove from left. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromLeft |
| STR srcTEL2IPPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.7 | SnmpAdminString | read-create | Prefix to Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Prefix2Add |
| U32 srcTEL2IPNumOfDigitsToLeave | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.8 | Unsigned32 | read-create | Number of digits to leave. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_LeaveFromRight |
| INT srcTEL2IPNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.9 | INTEGER | read-create | Number Plan. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberPlan |
| INT srcTEL2IPNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.10 | INTEGER | read-create | Number Type. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_NumberType |
| STR srcTEL2IPDestPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.11 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_DestinationPrefix |
| INT srcTEL2IPPresentation | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.12 | INTEGER | read-create | Presentation. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_IsPresentationRestricted |
| U32 srcTEL2IPNumOfDigitsToRemFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.13 | Unsigned32 | read-create | Num Of digits To Remove from Right. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_RemoveFromRight |
| STR srcTEL2IPSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.14 | SnmpAdminString | read-create | Suffix To Add. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_Suffix2Add |
| STR srcTEL2IPSourceIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.15 | SnmpAdminString | read-create | Source Address. Access: Instant. AC INI-Param: SourceNumberMapTel2Ip_SourceAddress |
| I32 srcTEL2IPSourceTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.16 | Integer32 | read-create | GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcTrunkGroupID |
| I32 srcTEL2IPSourceIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.24.1.17 | Integer32 | read-create | GwApp IP-toTel Destination Phone Number Manipulation Rules Table. Access: Instant. AC INI-Param: NumberMapIp2Tel_SrcIPGroupID |
| phoneContextTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25 | not-accessible | ||
| phoneContextEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1 | not-accessible | ||
| U32 phoneContextIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: PhoneContext_Index |
| ROW phoneContextRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT phoneContextAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT phoneContextActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT phoneContextNPI | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.5 | INTEGER | read-create | Number Plan. Access: Instant. AC INI-Param: PhoneContext_Npi |
| INT phoneContextTON | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.6 | INTEGER | read-create | Number Type. Access: Instant. AC INI-Param: PhoneContext_Ton |
| STR phoneContextPhoneContext | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.25.1.7 | SnmpAdminString | read-create | Phone-Context. Access: Instant. AC INI-Param: PhoneContext_Context |
| redirectNumberMapIp2TelTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26 | not-accessible | GwApp IP-to-Tel Redirect Phone Number Manipulation Rules Table | |
| redirectNumberMapIp2TelEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1 | not-accessible | ||
| U32 redirectNumberMapIp2TelIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: RedirectNumberMapIp2Tel_Index |
| ROW redirectNumberMapIp2TelRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT redirectNumberMapIp2TelAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT redirectNumberMapIp2TelActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR redirectNumberMapIp2TelDestinationPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_DestinationPrefix |
| STR redirectNumberMapIp2TelRedirectPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.6 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RedirectPrefix |
| STR redirectNumberMapIp2TelSourceAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.7 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SourceAddress |
| INT redirectNumberMapIp2TelNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.8 | INTEGER | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberType |
| INT redirectNumberMapIp2TelNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.9 | INTEGER | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_NumberPlan |
| U32 redirectNumberMapIp2TelRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.10 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromLeft |
| U32 redirectNumberMapIp2TelRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.11 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_RemoveFromRight |
| U32 redirectNumberMapIp2TelLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.12 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_LeaveFromRight |
| STR redirectNumberMapIp2TelPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.13 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Prefix2Add |
| STR redirectNumberMapIp2TelSuffixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.14 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_Suffix2Add |
| INT redirectNumberMapIp2TelIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.15 | INTEGER | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_IsPresentationRestricted |
| I32 redirectNumberMapIp2TelSrcTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.16 | Integer32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcTrunkGroupID |
| I32 redirectNumberMapIp2TelSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.26.1.17 | Integer32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapIp2Tel_SrcIPGroupID |
| redirectNumberMapTel2IpTable | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27 | not-accessible | GwApp Tel-to-IP Redirect Phone Number Manipulation Rules Table | |
| redirectNumberMapTel2IpEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1 | not-accessible | ||
| U32 redirectNumberMapTel2IpIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: RedirectNumberMapTel2Ip_Index |
| ROW redirectNumberMapTel2IpRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT redirectNumberMapTel2IpAction | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT redirectNumberMapTel2IpActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR redirectNumberMapTel2IpDestinationPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_DestinationPrefix |
| STR redirectNumberMapTel2IpRedirectPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.6 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RedirectPrefix |
| STR redirectNumberMapTel2IpSourceAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.7 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SourceAddress |
| U32 redirectNumberMapTel2IpNumberType | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.8 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberType |
| U32 redirectNumberMapTel2IpNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.9 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_NumberPlan |
| U32 redirectNumberMapTel2IpRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.10 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromLeft |
| U32 redirectNumberMapTel2IpRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.11 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_RemoveFromRight |
| U32 redirectNumberMapTel2IpLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.12 | Unsigned32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_LeaveFromRight |
| STR redirectNumberMapTel2IpPrefixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.13 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Prefix2Add |
| STR redirectNumberMapTel2IpSuffixToAdd | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.14 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_Suffix2Add |
| INT redirectNumberMapTel2IpIsPresentationRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.15 | INTEGER | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_IsPresentationRestricted |
| I32 redirectNumberMapTel2IpSrcTrunkGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.16 | Integer32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcTrunkGroupID |
| I32 redirectNumberMapTel2IpSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.2.21.27.1.17 | Integer32 | read-create | Access: Instant. AC INI-Param: RedirectNumberMapTel2Ip_SrcIPGroupID |
| connectivityQos | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22 | |||
| U32 connectivityQosMaxAllowedPL | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.1 | Unsigned32 | read-write | The maximum percentage of packet loss that will not prevent normal routing. Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDPL |
| U32 connectivityQosMaxAllowedDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.2 | Unsigned32 | read-write | The maximum delay that will not prevent normal routing (msec). Access: Instant. AC INI-Param: IPCONNQOSMAXALLOWEDDELAY |
| U32 connectivityQosEffectivePeriod | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.3 | Unsigned32 | read-write | if during this period [in seconds], no updated qos info received, theold qos info is discarded. if qos poor, and no calls alowed, after this period, calls will be allowed again. Access: Instant. AC INI-Param: IPCONNQOSEFFECTIVEPERIOD |
| U32 connectivityQosSamplesToAvarage | 1.3.6.1.4.1.5003.9.10.3.1.1.2.22.4 | Unsigned32 | read-write | number of samples to avarage. in other words define the weiught of the new sample. Access: Instant. AC INI-Param: IPCONNQOSSAMPLESTOAVARAGE |
| digitalGW | 1.3.6.1.4.1.5003.9.10.3.1.1.3 | |||
| INT digitalGWBChannelNegotiation | 1.3.6.1.4.1.5003.9.10.3.1.1.3.1 | INTEGER | read-write | ISDN B-Channel negotiation mode. Access: Instant. AC INI-Param: BCHANNELNEGOTIATION |
| INT digitalGWSwapRedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.3.2 | INTEGER | read-write | Swap Redirect and Called numbers. Access: Instant. AC INI-Param: SWAPREDIRECTNUMBER |
| INT digitalGWEnableTransferCap | 1.3.6.1.4.1.5003.9.10.3.1.1.3.3 | INTEGER | read-write | Select Transfer Capabilities method between H.323/Q.931 and ISDN/Q.931. Access: Instant. AC INI-Param: ENABLETRANSFERCAP |
| U32 digitalGWR2Category | 1.3.6.1.4.1.5003.9.10.3.1.1.3.4 | Unsigned32 | read-write | MFC\R2 Calling Party's category. Access: Instant. AC INI-Param: R2CATEGORY |
| INT digitalGWISDNRxOverlap | 1.3.6.1.4.1.5003.9.10.3.1.1.3.5 | INTEGER | read-write | Enable reception of overlap dialing from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP |
| INT digitalGWCASSendHookFlash | 1.3.6.1.4.1.5003.9.10.3.1.1.3.6 | INTEGER | read-write | 0 (default): Hookflash not forwarded 1:HookFlash forwarded - Testing. Access: Instant. AC INI-Param: CASSENDHOOKFLASH |
| INT digitalGWISDNTransferCapability | 1.3.6.1.4.1.5003.9.10.3.1.1.3.7 | INTEGER | read-write | Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPABILITY |
| INT digitalGWEnableTDMOverIp | 1.3.6.1.4.1.5003.9.10.3.1.1.3.8 | INTEGER | read-write | Enable gateway to maintain a permanent RTP connection. Access: Offline. AC INI-Param: ENABLETDMOVERIP |
| INT digitalGWTransparentCoderOnDataCall | 1.3.6.1.4.1.5003.9.10.3.1.1.3.9 | INTEGER | read-write | In case the transfer capability of a call from ISDN is data open with transparent coder. Access: Instant. AC INI-Param: TRANSPARENTCODERONDATACALL |
| INT digitalGWSupportRedirectInFacility | 1.3.6.1.4.1.5003.9.10.3.1.1.3.10 | INTEGER | read-write | Search for redirect number in facility IE. Access: Instant. AC INI-Param: SUPPORTREDIRECTINFACILITY |
| I32 digitalGWPIForDisconnectMsg | 1.3.6.1.4.1.5003.9.10.3.1.1.3.11 | Integer32 | read-write | Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG |
| INT digitalGWConnectOnProgressInd | 1.3.6.1.4.1.5003.9.10.3.1.1.3.12 | INTEGER | read-write | FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: CONNECTONPROGRESSIND |
| INT digitalGWLocalISDNRBSource | 1.3.6.1.4.1.5003.9.10.3.1.1.3.13 | INTEGER | read-write | If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE |
| INT digitalGWEnableUuiTel2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.3.14 | INTEGER | read-write | Enable User-User IE to pass in Setup from ISDN to IP. Access: Instant. AC INI-Param: ENABLEUUITEL2IP |
| INT digitalGWEnableUuiIp2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.3.15 | INTEGER | read-write | Enable User-User IE to pass in Setup from IP to ISDN. Access: Instant. AC INI-Param: ENABLEUUIIP2TEL |
| INT digitalGWSendISDNTransferOnConnect | 1.3.6.1.4.1.5003.9.10.3.1.1.3.16 | INTEGER | read-write | Send TBCT/ECT/RLT request only when second leg call is connected. Access: Instant. AC INI-Param: SENDISDNTRANSFERONCONNECT |
| INT digitalGWEnableISDNTunnelingTel2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.3.17 | INTEGER | read-write | Enable ISDN tunneling to pass Setup and Facility messages from ISDN to IP. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGTEL2IP |
| INT digitalGWEnableISDNTunnelingIp2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.3.18 | INTEGER | read-write | Enable ISDN tunneling to pass Setup and Facility messages from IP to ISDN. Access: Instant. AC INI-Param: ENABLEISDNTUNNELINGIP2TEL |
| INT digitalGWEnableCallingPartyCategory | 1.3.6.1.4.1.5003.9.10.3.1.1.3.19 | INTEGER | read-write | Enables NI2 calling party category translation to SIP. Access: Instant. AC INI-Param: ENABLECALLINGPARTYCATEGORY |
| iE | 1.3.6.1.4.1.5003.9.10.3.1.1.3.20 | |||
| STR iEAddIEInSetup | 1.3.6.1.4.1.5003.9.10.3.1.1.3.20.1 | SnmpAdminString | read-write | Additional information element to send in ISDN Setup message. Access: Instant. AC INI-Param: ADDIEINSETUP |
| STR iESendIEOnTG | 1.3.6.1.4.1.5003.9.10.3.1.1.3.20.2 | SnmpAdminString | read-write | Configure trunk groups on which to send additional IE. Access: Instant. AC INI-Param: SENDIEONTG |
| iSDNRxOverlapTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21 | not-accessible | Choose either: Disabled or Enabled (default). Any number bigger than one = Number of digits to receive. Note 1: If enabled, the Mediant 2000 receives ISDN called number that is sent in the 'Overlap' mode. Note 2: The SETUP to IP is sent only after the number (including 'Sending Complete' Info Element) was fully received (via SETUP and/or subsequent INFO Q.931 messages). | |
| iSDNRxOverlapEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1 | not-accessible | ||
| U32 iSDNRxOverlapIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT iSDNRxOverlapEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.21.1.2 | INTEGER | read-write | Receive overlap from ISDN side. Access: Instant. AC INI-Param: ISDNRXOVERLAP |
| trunkTransferTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22 | not-accessible | Trunk Transfer Mode table. | |
| trunkTransferEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1 | not-accessible | ||
| U32 trunkTransferIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT trunkTransferMode | 1.3.6.1.4.1.5003.9.10.3.1.1.3.22.1.2 | INTEGER | read-write | The type of transfer the PSTN/PBX supports. Access: Instant. AC INI-Param: TRUNKTRANSFERMODE |
| progressIndicatorToISDNTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23 | not-accessible | Progress Indicator To ISDN table. | |
| progressIndicatorToISDNEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1 | not-accessible | ||
| U32 progressIndicatorToISDNIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT progressIndicatorToISDNValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.23.1.2 | INTEGER | read-write | Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN |
| playRBToneToTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24 | not-accessible | Play RB Tone To Trunk table. | |
| playRBToneToTrunkEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1 | not-accessible | ||
| U32 playRBToneToTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT playRBToneToTrunkValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.24.1.2 | INTEGER | read-write | Enable ringback tone playing towards trunk side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TRUNK |
| iSDNTransferCapabilityTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25 | not-accessible | ISDN Transfer Capability Trunk table. | |
| iSDNTransferCapabilityEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1 | not-accessible | ||
| U32 iSDNTransferCapabilityIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT iSDNTransferCapabilityValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.25.1.2 | INTEGER | read-write | Send transfer capability to ISDN side on setup message -1:Do not Overwrite 0:Audio 3.1 1:Speech 2:Data 3:Audio. Access: Instant. AC INI-Param: ISDNTRANSFERCAPABILITY |
| localISDNRBSourceTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26 | not-accessible | Play RB Tone To Trunk table. | |
| localISDNRBSourceEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1 | not-accessible | ||
| U32 localISDNRBSourceIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT localISDNRBSourceValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.26.1.2 | INTEGER | read-write | If the ringback tone source is not IP, who should supply the Ringback tone. 0 - PBX/PSTN (default) ; 1- GW. Access: Instant. AC INI-Param: LOCALISDNRBSOURCE |
| pIForDisconnectMsgTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27 | not-accessible | PI For Disconnect Message Trunk table. | |
| pIForDisconnectMsgEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1 | not-accessible | ||
| U32 pIForDisconnectMsgIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| I32 pIForDisconnectMsgValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.27.1.2 | Integer32 | read-write | Configure PIForDisconnectMsg in order to overwrite PI value received in ISDN Disconnect message. Access: Instant. AC INI-Param: PIFORDISCONNECTMSG |
| pSTNAlertTimeoutTable | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28 | not-accessible | PSTN Alert Timeout | |
| pSTNAlertTimeoutEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1 | not-accessible | ||
| U32 pSTNAlertTimeoutIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| I32 pSTNAlertTimeoutValue | 1.3.6.1.4.1.5003.9.10.3.1.1.3.28.1.2 | Integer32 | read-write | Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: TRUNKPSTNALERTTIMEOUT |
| mlpp | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29 | |||
| INT mlppCallPriorityMode | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.1 | INTEGER | read-write | Priority mode: 0-disable 1-MLPP. Access: Instant. AC INI-Param: CALLPRIORITYMODE |
| INT mlppDefaultNamespace | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.2 | INTEGER | read-write | MLPP Default Namespace. Access: Instant. AC INI-Param: MLPPDEFAULTNAMESPACE |
| STR mlppDefaultCallPriority | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.3 | SnmpAdminString | read-write | SIP Default Call Priority. Access: Instant. AC INI-Param: SIPDEFAULTCALLPRIORITY |
| U32 mlppDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.4 | Unsigned32 | read-write | DiffServ value for MLPP calls. Access: Instant. AC INI-Param: MLPPDIFFSERV |
| U32 mlppPreemptionToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.5 | Unsigned32 | read-write | Preemption Tone Duration, 0-60 seconds. Access: Instant. AC INI-Param: PreemptionToneDuration |
| STR mlppDefaultServiceDomain | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.6 | SnmpAdminString | read-write | MLPP Default Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPDefaultServiceDomain |
| STR mlppNormalizedServiceDomain | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.7 | SnmpAdminString | read-write | MLPP Normalized Service Domain String (6 Hex Digits). Access: Instant. AC INI-Param: MLPPNormalizedServiceDomain |
| I32 mlppRoutineRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.8 | Integer32 | read-write | Defines the RTP DSCP for MLPP Routine call. Access: Instant. AC INI-Param: MLPPROUTINERTPDSCP |
| I32 mlppPriorityRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.9 | Integer32 | read-write | Defines the RTP DSCP for MLPP Priority call. Access: Instant. AC INI-Param: MLPPPRIORITYRTPDSCP |
| I32 mlppImmediateRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.10 | Integer32 | read-write | Defines the RTP DSCP for MLPP Immediate call. Access: Instant. AC INI-Param: MLPPIMMEDIATERTPDSCP |
| I32 mlppFlashRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.11 | Integer32 | read-write | Defines the RTP DSCP for MLPP Flash call. Access: Instant. AC INI-Param: MLPPFLASHRTPDSCP |
| I32 mlppFlashOverRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.12 | Integer32 | read-write | Defines the RTP DSCP for MLPP Flash-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVERRTPDSCP |
| I32 mlppFlashOverOverRTPDSCP | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.13 | Integer32 | read-write | Defines the RTP DSCP for MLPP Flash-Override-Override call. Access: Instant. AC INI-Param: MLPPFLASHOVEROVERRTPDSCP |
| INT mlppE911Behavior | 1.3.6.1.4.1.5003.9.10.3.1.1.3.29.14 | INTEGER | read-write | Defines the MLPP E911 Preemption mode: (0)-Standard Mode (ets calls will have the highest priority and can preemt any mlpp call), (1)-Treat as routine mode (ets calls are treated as routine calls). Access: Instant. AC INI-Param: E911MLPPBEHAVIOR |
| INT digitalGWPlayRBTOnISDNTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.3.40 | INTEGER | read-write | Play local RBT on TBCT/ECT/RLT transfer. Access: Instant. AC INI-Param: PLAYRBTONISDNTRANSFER |
| analogGW | 1.3.6.1.4.1.5003.9.10.3.1.1.4 | |||
| INT analogGWEnableReversalPolarity | 1.3.6.1.4.1.5003.9.10.3.1.1.4.1 | INTEGER | read-write | FXO: CONNECT/DISCONNECT calls upon detection of polarity signal. FXS: generate the signal. Access: Instant. AC INI-Param: ENABLEREVERSALPOLARITY |
| INT analogGWEnableCurrentDisconnect | 1.3.6.1.4.1.5003.9.10.3.1.1.4.2 | INTEGER | read-write | Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: ENABLECURRENTDISCONNECT |
| U32 analogGWRegretTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.3 | Unsigned32 | read-write | Time to wait between phone hang up and call termination. Access: Instant. AC INI-Param: REGRETTIME |
| U32 analogGWHotLineToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.4.4 | Unsigned32 | read-write | Duration of played hotline tone, after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: HOTLINETONEDURATION |
| fxs | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10 | |||
| INT fxsCutThrough | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.1 | INTEGER | read-write | Enable call connection without On-Hook/Off-Hook process 'Cut-Through'. Access: Instant. AC INI-Param: CUTTHROUGH |
| INT fxsMeteringMode | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.2 | INTEGER | read-write | Method of automatic generation of payphone metering pulses. Access: Instant. AC INI-Param: PAYPHONEMETERINGMODE |
| INT fxsFXSOOSBehavior | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.3 | INTEGER | read-write | FxsOosBehavior control how the fxs endpoints of a gateway, will behave in case of Out of Service. OutofService state may be result of two scenarios: a. EndPoint not configured in trunkgroup (Disabled) b. runtime busy out situation 0: NONE - no special activity. Disabled endpoint not responses, bsyout endpoint responses as usual 1: Play ReOrder tone 2: Reverse Polarity 3: Play ReOrder tone and Reverse Polarity. Access: Instant. AC INI-Param: FXSOOSBEHAVIOR |
| INT fxsSetOOSOnRegistrationFail | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.4 | INTEGER | read-write | Should deactivate endpoint service on registration failure. Access: Instant. AC INI-Param: OOSONREGISTRATIONFAIL |
| chargeCodesTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21 | not-accessible | ||
| chargeCodesEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1 | not-accessible | ||
| U32 chargeCodesIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.1 | Unsigned32 | not-accessible | Charge code index. AC INI-Param: ChargeCode_Index |
| ROW chargeCodesRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT chargeCodesAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT chargeCodesActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 chargeCodesPeriod1EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.5 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_EndTime1 |
| U32 chargeCodesPeriod1PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.6 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulseInterval1 |
| U32 chargeCodesPeriod1PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.7 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer1 |
| U32 chargeCodesPeriod2EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.8 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_EndTime2 |
| U32 chargeCodesPeriod2PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.9 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulseInterval2 |
| U32 chargeCodesPeriod2PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.10 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer2 |
| U32 chargeCodesPeriod3EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.11 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_EndTime3 |
| U32 chargeCodesPeriod3PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.12 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulseInterval3 |
| U32 chargeCodesPeriod3PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.13 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer3 |
| U32 chargeCodesPeriod4EndTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.14 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_EndTime4 |
| U32 chargeCodesPeriod4PulseInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.15 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulseInterval4 |
| U32 chargeCodesPeriod4PulsesOnAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.21.1.16 | Unsigned32 | read-create | Access: Instant. AC INI-Param: ChargeCode_PulsesOnAnswer4 |
| toneIndexTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22 | not-accessible | ||
| toneIndexEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1 | not-accessible | ||
| U32 toneIndexIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.1 | Unsigned32 | not-accessible | Charge code index. AC INI-Param: ToneIndex_Index |
| ROW toneIndexRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT toneIndexAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT toneIndexActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 toneIndexFXSPortFirst | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.5 | Unsigned32 | read-create | Staring Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_First |
| U32 toneIndexFXSPortLast | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.6 | Unsigned32 | read-create | End Range of FXS Port. Access: Instant. AC INI-Param: ToneIndex_FXSPort_Last |
| STR toneIndexSourcePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.7 | SnmpAdminString | read-create | Source Prefix. Access: Instant. AC INI-Param: ToneIndex_SourcePrefix |
| U32 toneIndexPriorityIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.10.22.1.8 | Unsigned32 | read-create | Index used for distinctive ringing and call waiting tones. Access: Instant. AC INI-Param: ToneIndex_PriorityIndex |
| fxo | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11 | |||
| INT fxoIsTwoStageDial | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.1 | INTEGER | read-write | Dialing Mode - One-Stage (PBX Pass-thru) or Two-Stage. Access: Instant. AC INI-Param: ISTWOSTAGEDIAL |
| INT fxoWaitForDialTone | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.2 | INTEGER | read-write | Wait for dial tone before initiating an outgoing call to PBX/PSTN (FXO one-stage dialing mode). Access: Instant. AC INI-Param: ISWAITFORDIALTONE |
| U32 fxoWaitForDialTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.3 | Unsigned32 | read-write | Time delay between seizing the line and start dialing (if ISWAITFORDIALTONE disabled) or after hookflash before dialing. Access: Instant. AC INI-Param: WAITFORDIALTIME |
| U32 fxoBetweenRingTime | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.4 | Unsigned32 | read-write | Timeout for releasing FXO to IP call, if FXO port doesn't detect ringing signal for this timeout. Access: Instant. AC INI-Param: FXOBETWEENRINGTIME |
| INT fxoEnableVoiceDetection | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.5 | INTEGER | read-write | On FXO GWs enables sending of connect/200 OK message on speech/fax/modem detection [default 0]. In order to activate feature DSPVersionTemplateNumber should be 2 or 3. Access: Instant. AC INI-Param: ENABLEVOICEDETECTION |
| U32 fxoRingsBeforeCallerID | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.6 | Unsigned32 | read-write | Number of rings after which the Caller ID is detected. Access: Instant. AC INI-Param: RINGSBEFORECALLERID |
| U32 fxoGuardTimeBetweenCalls | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.7 | Unsigned32 | read-write | Only for FXO: the time between the time that the EP execute OnHook, to the time that this EP is capable to except new IP2TEL call (and execute OfHook). Access: Instant. AC INI-Param: GUARDTIMEBETWEENCALLS |
| INT fxoAutoDialPlayBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.4.11.8 | INTEGER | read-write | Only for FXO, Tel2IP calls: If enable (1) - On receiving release, if autodial is used, the FXO seize the line and play Busy/Reorder tone toward the PSTN for Reorder-time duration. . Access: Instant. AC INI-Param: FXOAutoDialPlayBusyTone |
| dialing | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12 | |||
| U32 dialingMaxDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.1 | Unsigned32 | read-write | Maximum number of digits before dialing starts. Access: Instant. AC INI-Param: MAXDIGITS |
| U32 dialingTimeBetweenDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.2 | Unsigned32 | read-write | Timeout in seconds between dialed digits. Access: Instant. AC INI-Param: TIMEBETWEENDIGITS |
| INT dialingIsSpecialDigits | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.3 | INTEGER | read-write | When disabled, pressing special digits (* or #) will terminate digit collection. When enabled, special digits can be received as part of the dialed number or Endpoint phone number. Access: Instant. AC INI-Param: ISSPECIALDIGITS |
| STR dialingDigitMapping | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.4 | SnmpAdminString | read-write | The digit map patterns separated by a vertical bar (|), as defined in the MEGACO RFC. Access: Instant. AC INI-Param: DIGITMAPPING |
| INT dialingEnableDigitDelivery | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.5 | INTEGER | read-write | Enable automatic digit delivery to Tel side after line is off-hooked or seized. Access: Offline. AC INI-Param: ENABLEDIGITDELIVERY |
| I32 dialingDialPlanIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.6 | Integer32 | read-write | Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: DIALPLANINDEX |
| autoDialTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21 | not-accessible | ||
| autoDialEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1 | not-accessible | ||
| U32 autoDialIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.1 | Unsigned32 | read-only | Entry number, starting at 0. AC INI-Param: TargetOfChannel_Index |
| INT autoDialIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.2 | INTEGER | read-write | Is this index used. AC INI-Param: TargetOfChannel_IsUsed |
| INT autoDialAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT autoDialActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR autoDialDestPhoneNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.5 | SnmpAdminString | read-write | Access: Instant. AC INI-Param: TargetOfChannel_Destination |
| INT autoDialType | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.6 | INTEGER | read-write | Choose auto dial type. Access: Instant. AC INI-Param: TargetOfChannel_Type |
| U32 autoDialModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.7 | Unsigned32 | read-only | Channels Module. AC INI-Param: TargetOfChannel_Module |
| U32 autoDialPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.12.21.1.8 | Unsigned32 | read-only | Channels Port. AC INI-Param: TargetOfChannel_Port |
| callerID | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13 | |||
| INT callerIDEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.1 | INTEGER | read-write | FXS:generate CallerId siganls during ringing FXO:collect CallerId and use it in Setup message. Access: Instant. AC INI-Param: ENABLECALLERID |
| callerDisplayTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21 | not-accessible | ||
| callerDisplayEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1 | not-accessible | ||
| U32 callerDisplayIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.1 | Unsigned32 | read-only | Entry number, starting at 0. AC INI-Param: CallerDisplayInfo_Index |
| INT callerDisplayIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.2 | INTEGER | read-write | Is this index used. AC INI-Param: CallerDisplayInfo_IsUsed |
| INT callerDisplayAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT callerDisplayActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR callerDisplayCallerDisplay | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.5 | SnmpAdminString | read-write | Caller Name. Access: Instant. AC INI-Param: CallerDisplayInfo_DisplayString |
| INT callerDisplayRestriction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.6 | INTEGER | read-write | Restriction. Access: Instant. AC INI-Param: CallerDisplayInfo_IsCidRestricted |
| U32 callerDisplayModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.7 | Unsigned32 | read-only | Channels Module. AC INI-Param: CallerDisplayInfo_Module |
| U32 callerDisplayPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.21.1.8 | Unsigned32 | read-only | Channels Port. AC INI-Param: CallerDisplayInfo_Port |
| callerIDperPortTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22 | not-accessible | ||
| callerIDperPortEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1 | not-accessible | ||
| U32 callerIDperPortIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.1 | Unsigned32 | read-only | . AC INI-Param: EnableCallerId_Index |
| INT callerIDperPortIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.2 | INTEGER | read-write | Is this index used. Access: Offline. AC INI-Param: EnableCallerId_IsUsed |
| INT callerIDperPortAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT callerIDperPortActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT callerIDperPortEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.5 | INTEGER | read-write | Enable. Access: Instant. AC INI-Param: EnableCallerId_IsEnabled |
| U32 callerIDperPortModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.6 | Unsigned32 | read-only | Channels Module. AC INI-Param: EnableCallerId_Module |
| U32 callerIDperPortPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.13.22.1.7 | Unsigned32 | read-only | Channels Port. AC INI-Param: EnableCallerId_Port |
| keypadFeatures | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14 | |||
| STR keypadFeaturesCFUncond | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.1 | SnmpAdminString | read-write | Keying sequence for activating immediate Call Forward. Access: Instant. AC INI-Param: KEYCFUNCOND |
| STR keypadFeaturesCFDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.2 | SnmpAdminString | read-write | Keying sequence for deactivating Call Forward. Access: Instant. AC INI-Param: KEYCFDEACT |
| STR keypadFeaturesCFNoAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.3 | SnmpAdminString | read-write | Keying sequence for activating Call Forward on no answer. Access: Instant. AC INI-Param: KEYCFNOANSWER |
| STR keypadFeaturesCFBusy | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.4 | SnmpAdminString | read-write | Keying sequence for activating Call Forward on busy. Access: Instant. AC INI-Param: KEYCFBUSY |
| STR keypadFeaturesCLIR | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.5 | SnmpAdminString | read-write | Keying sequence for activating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIR |
| STR keypadFeaturesCLIRDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.6 | SnmpAdminString | read-write | Keying sequence for deactivating restricted Caller ID. Access: Instant. AC INI-Param: KEYCLIRDEACT |
| STR keypadFeaturesHotLine | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.7 | SnmpAdminString | read-write | Keying sequence for activating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINE |
| STR keypadFeaturesHotLineDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.8 | SnmpAdminString | read-write | Keying sequence for deactivating delayed Hot-line. Access: Instant. AC INI-Param: KEYHOTLINEDEACT |
| STR keypadFeaturesCFBusyOrNoAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.9 | SnmpAdminString | read-write | Keying sequence for activating Call Forward on busy or no answer. Access: Instant. AC INI-Param: KEYCFBUSYORNOANSWER |
| STR keypadFeaturesCFDoNotDisturb | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.10 | SnmpAdminString | read-write | Keying sequence for activating Do Not Disturb. Access: Instant. AC INI-Param: KEYCFDONOTDISTURB |
| STR keypadFeaturesBlindTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.11 | SnmpAdminString | read-write | Keying sequence for performing blind transfer. Access: Instant. AC INI-Param: KEYBLINDTRANSFER |
| STR keypadFeaturesKeypadFeaturesCW | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.12 | SnmpAdminString | read-write | Keying sequence for activating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT |
| STR keypadFeaturesKeypadFeaturesCWDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.13 | SnmpAdminString | read-write | Keying sequence for deactivating call waiting. Access: Instant. AC INI-Param: KEYCALLWAITINGDEACT |
| STR keypadFeaturesRejectAnonymousCall | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.14 | SnmpAdminString | read-write | Key pad pattern for rejecting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCall |
| STR keypadFeaturesRejectAnonymousCallDeact | 1.3.6.1.4.1.5003.9.10.3.1.1.4.14.15 | SnmpAdminString | read-write | Key pad pattern for accepting anonymous call. Access: Instant. AC INI-Param: KeyRejectAnonymousCallDeact |
| portName | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15 | |||
| namesTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21 | not-accessible | ||
| namesEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1 | not-accessible | ||
| U32 namesIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.1 | Unsigned32 | read-only | Entry number, starting at 0. AC INI-Param: PortName_Index |
| INT namesIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.2 | INTEGER | read-write | Is this index used. AC INI-Param: PortName_IsUsed |
| INT namesAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT namesActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR namesPortName | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.5 | SnmpAdminString | read-write | Access: Instant. AC INI-Param: PortName_Name |
| U32 namesModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.6 | Unsigned32 | read-only | Module. AC INI-Param: PortName_Module |
| U32 namesPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.15.21.1.7 | Unsigned32 | read-only | Port. AC INI-Param: PortName_Port |
| dID | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16 | |||
| INT dIDEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.1 | INTEGER | read-write | Enable DID support. Access: Instant. AC INI-Param: ENABLEDID |
| INT dIDEnableWink | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.2 | INTEGER | read-write | Enable support for DID lines using Wink. Access: Instant. AC INI-Param: ENABLEDIDWINK |
| U32 dIDDelayBeforeDidWink | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.3 | Unsigned32 | read-write | delay between Off-Hook detection and Wink generation (relevant only for FXS). unit - ms. Access: Instant. AC INI-Param: DELAYBEFOREDIDWINK |
| enableDidPortTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21 | not-accessible | ||
| enableDidPortEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1 | not-accessible | ||
| U32 enableDidPortIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.1 | Unsigned32 | read-only | . AC INI-Param: EnableDid_Index |
| INT enableDidPortIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.2 | INTEGER | read-write | Is this index used. Access: Offline. AC INI-Param: EnableDid_IsUsed |
| INT enableDidPortAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT enableDidPortActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT enableDidPortEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.5 | INTEGER | read-write | Enable. Access: Instant. AC INI-Param: EnableDid_IsEnable |
| U32 enableDidPortModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.6 | Unsigned32 | read-only | Channels Module. AC INI-Param: EnableDid_Module |
| U32 enableDidPortPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.16.21.1.7 | Unsigned32 | read-only | Channels Port. AC INI-Param: EnableDid_Port |
| enableCallWaitingPerPortTable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21 | not-accessible | ||
| enableCallWaitingPerPortEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1 | not-accessible | table | |
| U32 enableCallWaitingPerPortIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.1 | Unsigned32 | read-only | . AC INI-Param: CallWaitingPerPort_Index |
| INT enableCallWaitingPerPortIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.2 | INTEGER | read-write | Is this index used. Access: Instant. AC INI-Param: CallWaitingPerPort_IsUsed |
| U32 enableCallWaitingPerPortModule | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.3 | Unsigned32 | read-only | module. AC INI-Param: CallWaitingPerPort_Module |
| U32 enableCallWaitingPerPortPort | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.4 | Unsigned32 | read-only | port. AC INI-Param: CallWaitingPerPort_Port |
| INT enableCallWaitingPerPortAction | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.5 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT enableCallWaitingPerPortActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.6 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT enableCallWaitingPerPortEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.4.21.1.7 | INTEGER | read-write | Enable. Access: Instant. AC INI-Param: CallWaitingPerPort_IsEnabled |
| mediaGW | 1.3.6.1.4.1.5003.9.10.3.1.1.5 | |||
| U32 mediaGWMediaChannels | 1.3.6.1.4.1.5003.9.10.3.1.1.5.1 | Unsigned32 | read-write | Number of channels associated with media services (announcements, conferencing). Access: Offline. AC INI-Param: MEDIACHANNELS |
| conference | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10 | |||
| STR conferenceID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.1 | SnmpAdminString | read-write | Identification of conference call (To be used by SIP INVITE). Access: Instant. AC INI-Param: CONFERENCEID |
| INT conferenceBipOnConference | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.2 | INTEGER | read-write | Beep when a new participant joins a conference. Access: Instant. AC INI-Param: BIPONCONFERENCE |
| INT conferenceEnableDTMFReporting | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.3 | INTEGER | read-write | EnableConferenceDTMFReporting- if enable report in out of band format about detected DTMF digits (values 1-Report,0 - Not Report). Access: Instant. AC INI-Param: EnableConferenceDTMFReporting |
| INT conferenceEnableDTMFClamping | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.4 | INTEGER | read-write | EnableConferenceDTMFClamp - if enable remove detected DTMF digits from the audio stream on simple conference participant. Access: Instant. AC INI-Param: EnableConferenceDTMFClamp |
| INT conference3WayMode | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.5 | INTEGER | read-write | If 3wayConferenceMode=0, the usual conference mode will be used, this mode wil be compatible with our IPmedia server. The INVITE messages that are used to form a conference call, all will contain the same conIfD in sip INVITE requests. If 3wayConferenceMode=1, only the first INVITE send to conference server will use the confID. In contact header of 200OK response, the conference server returns a conference URI. This conference URI will be included (by our MP gateway) in REFER-TO header in the REFER messages, send by the MP GW to other sip clients. The sip client will join to conference by sending INVITEs to the conference server using this conference URI . 3wayConferenceMode = 2: InBoard 3w Conference. Access: Instant. AC INI-Param: 3WAYCONFERENCEMODE |
| U32 conferenceMaxInBoardCalls | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.6 | Unsigned32 | read-write | Max InBoard Conference Calls. Access: Offline. AC INI-Param: MaxInBoardConferenceCalls |
| acTWCnonAllocateablePortsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21 | not-accessible | ||
| acTWCnonAllocateablePortsEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1 | not-accessible | ||
| U32 acTWCnonAllocateablePortsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1.1 | Unsigned32 | not-accessible | Line index. AC INI-Param: N/A |
| U32 acTWCnonAllocateablePortsNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.5.10.21.1.2 | Unsigned32 | read-write | Define the Ports that are not hit by 3w conference feature. Access: Instant. AC INI-Param: 3WayConfNoneAllocateablePorts |
| announcement | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11 | |||
| STR announcementID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.1 | SnmpAdminString | read-write | Identification of a play voice prompt call (To be used by SIP INVITE). Access: Instant. AC INI-Param: ANNOUNCEMENTID |
| U32 announcementNumOfEndPoints | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.2 | Unsigned32 | read-write | Number of Annuncment endpoints. Access: Offline. AC INI-Param: NUMOFANNOUNCENDPOINTS |
| STR announcementToneID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.3 | SnmpAdminString | read-write | Identification of a play call progress tone call (To be used by SIP INVITE). Access: Instant. AC INI-Param: TONEID |
| streaming | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10 | |||
| STR streamingID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.1 | SnmpAdminString | read-write | Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: STREAMINGID |
| U32 streamingNumOfEndPoints | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.2 | Unsigned32 | read-write | Number of Streaming endpoints. Access: Offline. AC INI-Param: NUMOFSTREAMINGENDPOINTS |
| STR streamingRecordScriptPath | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.3 | SnmpAdminString | read-write | Identification of HTTP Record Script (To be used by FOR RECORD). Access: Offline. AC INI-Param: RecordScriptPath |
| STR streamingMediaID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.4 | SnmpAdminString | read-write | Identification of HTTP played voice prompt (To be used by SIP INVITE). Access: Instant. AC INI-Param: MediaStreamingID |
| I32 streamingStopRecordingOnNoSpeachTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.5 | Integer32 | read-write | Timeout for no speech detection used to stop recording. Access: Instant. AC INI-Param: STOPRECORDINGONNOSPEACHTIMEOUT |
| STR streamingPlayFromID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.6 | SnmpAdminString | read-write | Identification of voice stream play location (To be used by SIP INVITE). Access: Instant. AC INI-Param: PLAYFROMID |
| STR streamingRecordToID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.7 | SnmpAdminString | read-write | Identification of voice stream recording location (To be used by SIP INVITE). Access: Instant. AC INI-Param: RECORDTOID |
| STR streamingNetAnnAnncID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.8 | SnmpAdminString | read-write | NetAnn Announcement ID. Access: Instant. AC INI-Param: NETANNANNCID |
| STR streamingMscmlID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.9 | SnmpAdminString | read-write | Identification of HTTP played voice prompt using mscml(To be used by SIP INVITE). Access: Instant. AC INI-Param: MSCMLID |
| STR streamingMonitorID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.11.10.10 | SnmpAdminString | read-write | Identification of Calea call (To be used by SIP INVITE). Access: Instant. AC INI-Param: MONITORID |
| vxml | 1.3.6.1.4.1.5003.9.10.3.1.1.5.12 | |||
| STR vxmlID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.12.1 | SnmpAdminString | read-write | Identification of VoiceXML call (To be used by SIP INVITE). Access: Instant. AC INI-Param: VXMLID |
| U32 vxmlNumOfEndPoints | 1.3.6.1.4.1.5003.9.10.3.1.1.5.12.2 | Unsigned32 | read-write | Number of VXML endpoints. Access: Offline. AC INI-Param: NUMOFVXMLENDPOINTS |
| calea | 1.3.6.1.4.1.5003.9.10.3.1.1.5.13 | |||
| INT caleaInterceptionDirection | 1.3.6.1.4.1.5003.9.10.3.1.1.5.13.1 | INTEGER | read-write | Defines the direction of interception of a BCT listener. Access: Offline. AC INI-Param: INTERCEPTIONDIRECTION |
| transcoding | 1.3.6.1.4.1.5003.9.10.3.1.1.5.14 | |||
| STR transcodingID | 1.3.6.1.4.1.5003.9.10.3.1.1.5.14.1 | SnmpAdminString | read-write | SIP Transcoding ID. Access: Instant. AC INI-Param: TRANSCODINGID |
| coders | 1.3.6.1.4.1.5003.9.10.3.1.1.6 | |||
| codersTable | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1 | not-accessible | The names of the five possible coders. | |
| codersEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1 | not-accessible | ||
| U32 codersIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: CoderName_Index |
| ROW codersRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT codersAction | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT codersActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT codersName | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.5 | INTEGER | read-create | Coder Name. Access: Offline. AC INI-Param: N/A |
| U32 codersInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.6 | Unsigned32 | read-create | Coder Interval. Access: Offline. AC INI-Param: CoderName_PacketInterval |
| U32 codersRate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.7 | Unsigned32 | read-create | Rate in bit per second. Access: Offline. AC INI-Param: CoderName_rate |
| U32 codersPayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.8 | Unsigned32 | read-create | Payload type. Access: Offline. AC INI-Param: CoderName_PayloadType |
| INT codersSilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.1.1.9 | INTEGER | read-create | Silence Suppression. Access: Offline. AC INI-Param: CoderName_Sce |
| codersGroup0Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2 | not-accessible | ||
| codersGroup0Entry | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1 | not-accessible | ||
| U32 codersGroup0Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: CodersGroup0_Index |
| ROW codersGroup0RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: N/A |
| INT codersGroup0Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.3 | INTEGER | read-create | Mangement Field for ACTIONS. AC INI-Param: N/A |
| INT codersGroup0ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.4 | INTEGER | read-only | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| INT codersGroup0Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.5 | INTEGER | read-create | Coders Group name. Access: Instant. AC INI-Param: CodersGroup0_Name |
| U32 codersGroup0PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.6 | Unsigned32 | read-create | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup0_pTime |
| U32 codersGroup0Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.7 | Unsigned32 | read-create | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup0_rate |
| I32 codersGroup0PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.8 | Integer32 | read-create | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup0_PayloadType |
| INT codersGroup0SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.2.1.9 | INTEGER | read-create | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup0_Sce |
| codersGroup1Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3 | not-accessible | ||
| codersGroup1Entry | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1 | not-accessible | ||
| U32 codersGroup1Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: CodersGroup1_Index |
| ROW codersGroup1RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: N/A |
| INT codersGroup1Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.3 | INTEGER | read-create | Mangement Field for ACTIONS. AC INI-Param: N/A |
| INT codersGroup1ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.4 | INTEGER | read-only | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| INT codersGroup1Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.5 | INTEGER | read-create | Coders Group name. Access: Instant. AC INI-Param: CodersGroup1_Name |
| U32 codersGroup1PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.6 | Unsigned32 | read-create | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup1_pTime |
| U32 codersGroup1Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.7 | Unsigned32 | read-create | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup1_rate |
| U32 codersGroup1PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.8 | Unsigned32 | read-create | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup1_PayloadType |
| INT codersGroup1SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.3.1.9 | INTEGER | read-create | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup1_Sce |
| codersGroup2Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4 | not-accessible | ||
| codersGroup2Entry | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1 | not-accessible | ||
| U32 codersGroup2Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: CodersGroup2_Index |
| ROW codersGroup2RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: N/A |
| INT codersGroup2Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.3 | INTEGER | read-create | Mangement Field for ACTIONS. AC INI-Param: N/A |
| INT codersGroup2ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.4 | INTEGER | read-only | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| INT codersGroup2Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.5 | INTEGER | read-create | Coders Group name. Access: Instant. AC INI-Param: CodersGroup2_Name |
| U32 codersGroup2PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.6 | Unsigned32 | read-create | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup2_pTime |
| U32 codersGroup2Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.7 | Unsigned32 | read-create | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup2_rate |
| I32 codersGroup2PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.8 | Integer32 | read-create | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup2_PayloadType |
| INT codersGroup2SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.4.1.9 | INTEGER | read-create | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup2_Sce |
| codersGroup3Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5 | not-accessible | ||
| codersGroup3Entry | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1 | not-accessible | ||
| U32 codersGroup3Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: CodersGroup3_Index |
| ROW codersGroup3RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: N/A |
| INT codersGroup3Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.3 | INTEGER | read-create | Mangement Field for ACTIONS. AC INI-Param: N/A |
| INT codersGroup3ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.4 | INTEGER | read-only | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| INT codersGroup3Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.5 | INTEGER | read-create | Coders Group name. Access: Instant. AC INI-Param: CodersGroup3_Name |
| U32 codersGroup3PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.6 | Unsigned32 | read-create | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup3_pTime |
| U32 codersGroup3Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.7 | Unsigned32 | read-create | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup3_rate |
| I32 codersGroup3PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.8 | Integer32 | read-create | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup3_PayloadType |
| INT codersGroup3SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.5.1.9 | INTEGER | read-create | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup3_Sce |
| codersGroup4Table | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6 | not-accessible | ||
| codersGroup4Entry | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1 | not-accessible | ||
| U32 codersGroup4Index | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.1 | Unsigned32 | not-accessible | Index Field for line. AC INI-Param: CodersGroup4_Index |
| ROW codersGroup4RowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.2 | RowStatus | read-create | ROWSTATUS field for line. AC INI-Param: N/A |
| INT codersGroup4Action | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.3 | INTEGER | read-create | Mangement Field for ACTIONS. AC INI-Param: N/A |
| INT codersGroup4ActionRes | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.4 | INTEGER | read-only | Mangement Field for ACTIONS RESULT. AC INI-Param: N/A |
| INT codersGroup4Name | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.5 | INTEGER | read-create | Coders Group name. Access: Instant. AC INI-Param: CodersGroup4_Name |
| U32 codersGroup4PacketizationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.6 | Unsigned32 | read-create | Coders Group packetization time. Access: Instant. AC INI-Param: CodersGroup4_pTime |
| U32 codersGroup4Rate | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.7 | Unsigned32 | read-create | Coders Group rate. Access: Instant. AC INI-Param: CodersGroup4_rate |
| I32 codersGroup4PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.8 | Integer32 | read-create | Coders Group payload type. Access: Instant. AC INI-Param: CodersGroup4_PayloadType |
| INT codersGroup4SilenceSuppression | 1.3.6.1.4.1.5003.9.10.3.1.1.6.6.1.9 | INTEGER | read-create | Coders Group silence suppression. Access: Instant. AC INI-Param: CodersGroup4_Sce |
| supServices | 1.3.6.1.4.1.5003.9.10.3.1.1.7 | |||
| INT supServicesEnableHold | 1.3.6.1.4.1.5003.9.10.3.1.1.7.1 | INTEGER | read-write | Enable Call Hold service. Access: Instant. AC INI-Param: ENABLEHOLD |
| INT supServicesNameID | 1.3.6.1.4.1.5003.9.10.3.1.1.7.2 | INTEGER | read-write | Enable Name Identification service. Access: Instant. AC INI-Param: ENABLENAMEIDENTIFICATION |
| INT supServicesHoldFormat | 1.3.6.1.4.1.5003.9.10.3.1.1.7.3 | INTEGER | read-write | Call Hold format - Zero IP or 'sendonly' SDP attribute. Access: Instant. AC INI-Param: HOLDFORMAT |
| INT supServicesSendMeteringMessageToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.7.4 | INTEGER | read-write | Send metering messages to IP on detection of analog metering pulses. Access: Instant. AC INI-Param: SENDMETERING2IP |
| I32 supServicesHeldTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.7.5 | Integer32 | read-write | Maximum time allowed for call to be retreived from IP (seconds). Access: Instant. AC INI-Param: HELDTIMEOUT |
| STR supServicesHookFlashCode | 1.3.6.1.4.1.5003.9.10.3.1.1.7.6 | SnmpAdminString | read-write | If this code received during session, act as if hook flash received from the TEL side. This parameter can use DIGIT MAP syntax. Access: Instant. AC INI-Param: HookFlashCode |
| U32 supServicesCHRRTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.7.7 | Unsigned32 | read-write | Call hold reminder ring maximum ringing time (in seconds). Access: Instant. AC INI-Param: CHRRTIMEOUT |
| INT supServicesEnableHold2ISDN | 1.3.6.1.4.1.5003.9.10.3.1.1.7.8 | INTEGER | read-write | Enable Hold/retrieve from and to ISDN. Access: Instant. AC INI-Param: ENABLEHOLD2ISDN |
| INT supServicesEnableMOH | 1.3.6.1.4.1.5003.9.10.3.1.1.7.9 | INTEGER | read-write | FXS: enable playing Music On Hold (instead of Held tone to the PSTN side). Access: Instant. AC INI-Param: EnableMOH |
| transfer | 1.3.6.1.4.1.5003.9.10.3.1.1.7.10 | |||
| INT transferEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.10.1 | INTEGER | read-write | Enable Call Transfer service. Access: Instant. AC INI-Param: ENABLETRANSFER |
| STR transferXferPrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.7.10.2 | SnmpAdminString | read-write | Prefix added to the called number of a transferred call. Access: Instant. AC INI-Param: XFERPREFIX |
| callWaiting | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11 | |||
| INT callWaitingEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.1 | INTEGER | read-write | Enable Call Waiting service. Access: Instant. AC INI-Param: ENABLECALLWAITING |
| U32 callWaitingNumberOfIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.2 | Unsigned32 | read-write | Number of Call Waiting indications to be played to the user. Access: Instant. AC INI-Param: NUMBEROFWAITINGINDICATIONS |
| U32 callWaitingTimeBetweenIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.3 | Unsigned32 | read-write | Time between one call waiting indication to the next (seconds). Access: Instant. AC INI-Param: TIMEBETWEENWAITINGINDICATIONS |
| U32 callWaitingWaitingBeepDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.4 | Unsigned32 | read-write | Call Waiting tone beep length (msec). Access: Instant. AC INI-Param: WAITINGBEEPDURATION |
| U32 callWaitingTimeBeforeWaitingIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.7.11.5 | Unsigned32 | read-write | Time before call waiting indication is sent to a busy line (seconds). Access: Instant. AC INI-Param: TIMEBEFOREWAITINGINDICATIONS |
| forwardSettings | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12 | |||
| INT forwardSettingsEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.1 | INTEGER | read-write | Enable Call Forward service. Access: Instant. AC INI-Param: ENABLEFORWARD |
| forwardTable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21 | not-accessible | ||
| forwardEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1 | not-accessible | ||
| U32 forwardIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.1 | Unsigned32 | read-only | Entry number, starting at 0. AC INI-Param: FwdInfo_Index |
| INT forwardIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.2 | INTEGER | read-write | Is this index used. AC INI-Param: FwdInfo_IsUsed |
| INT forwardAction | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT forwardActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT forwardForwardType | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.5 | INTEGER | read-write | Access: Instant. AC INI-Param: FwdInfo_Type |
| STR forwardForwardedToNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.6 | SnmpAdminString | read-write | Access: Instant. AC INI-Param: FwdInfo_Destination |
| U32 forwardTimeForNoReply | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.7 | Unsigned32 | read-write | Access: Instant. AC INI-Param: FwdInfo_NoReplyTime |
| U32 forwardModule | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.8 | Unsigned32 | read-only | Module. AC INI-Param: FwdInfo_Module |
| U32 forwardPort | 1.3.6.1.4.1.5003.9.10.3.1.1.7.12.21.1.9 | Unsigned32 | read-only | Port. AC INI-Param: FwdInfo_Port |
| mWI | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13 | |||
| INT mWIEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.1 | INTEGER | read-write | Enable MWI support (Message Waiting Indicator). Access: Instant. AC INI-Param: ENABLEMWI |
| INT mWIAnalogLamp | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.2 | INTEGER | read-write | Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: MWIANALOGLAMP |
| INT mWIDisplay | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.3 | INTEGER | read-write | Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: MWIDISPLAY |
| STR mWIServerIP | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.4 | SnmpAdminString | read-write | MWI server IP address. Access: Instant. AC INI-Param: MWISERVERIP |
| U32 mWIExpirationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.5 | Unsigned32 | read-write | MWI service subscription expiration time (seconds). Access: Instant. AC INI-Param: MWIEXPIRATIONTIME |
| INT mWIServerTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.7.13.6 | INTEGER | read-write | MWI server transport type. Access: Instant. AC INI-Param: MWISERVERTRANSPORTTYPE |
| supServicesConference | 1.3.6.1.4.1.5003.9.10.3.1.1.7.14 | |||
| INT supServicesConferenceEnable3Way | 1.3.6.1.4.1.5003.9.10.3.1.1.7.14.1 | INTEGER | read-write | Enable 3 way conference feature. Access: Offline. AC INI-Param: ENABLE3WAYCONFERENCE |
| STR supServicesConferenceEstablishCode | 1.3.6.1.4.1.5003.9.10.3.1.1.7.14.2 | SnmpAdminString | read-write | Control Key activation of the 3 way conference. Access: Instant. AC INI-Param: CONFERENCECODE |
| U32 supServicesBlindTransferDisconnectTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.7.30 | Unsigned32 | read-write | Maximum time (milliseconds) to wait for disconnect from tel before performing blind transfer. Access: Instant. AC INI-Param: BLINDTRANSFERDISCONNECTTIMEOUT |
| tones | 1.3.6.1.4.1.5003.9.10.3.1.1.8 | |||
| U32 tonesTimeForReorderTone | 1.3.6.1.4.1.5003.9.10.3.1.1.8.1 | Unsigned32 | read-write | Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TIMEFORREORDERTONE |
| U32 tonesTimeForDialTone | 1.3.6.1.4.1.5003.9.10.3.1.1.8.2 | Unsigned32 | read-write | Duration of played dial tone after the gateway seizes the line in response to ringing. Access: Instant. AC INI-Param: TIMEFORDIALTONE |
| INT tonesPlayRBTone2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.8.3 | INTEGER | read-write | Enable ringback tone playing towards IP. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2IP |
| INT tonesPlayRBTone2Tel | 1.3.6.1.4.1.5003.9.10.3.1.1.8.4 | INTEGER | read-write | Enable ringback tone playing towards Tel side. Refer to User's Manual for details. Access: Instant. AC INI-Param: PLAYRBTONE2TEL |
| U32 tonesStutterToneDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.8.5 | Unsigned32 | read-write | Time for playing confirmation tone before normal dial tone is played (msec). Access: Instant. AC INI-Param: STUTTERTONEDURATION |
| INT tonesPlayRBToneXferSuccess | 1.3.6.1.4.1.5003.9.10.3.1.1.8.6 | INTEGER | read-write | Play RB tone on transfer success. Access: Instant. AC INI-Param: PLAYRBTONEONXFER |
| I32 tonesFirstCallRBTId | 1.3.6.1.4.1.5003.9.10.3.1.1.8.7 | Integer32 | read-write | the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLRBTID |
| I32 tonesPrecedenceRingingType | 1.3.6.1.4.1.5003.9.10.3.1.1.8.8 | Integer32 | read-write | the index of the first Call RB tone in the call-progress tones file. Access: Instant. AC INI-Param: PRECEDENCERINGINGTYPE |
| I32 tonesFirstCallWaitingToneID | 1.3.6.1.4.1.5003.9.10.3.1.1.8.9 | Integer32 | read-write | The index of the first Call Waiting tone in the call-progress tones file. Access: Instant. AC INI-Param: FIRSTCALLWAITINGTONEID |
| INT tonesEnableComfortTone | 1.3.6.1.4.1.5003.9.10.3.1.1.8.10 | INTEGER | read-write | Enable Comfort Tone for playing a patience comfort tone between Invite and 18x response. [0] - Disabled [1] - Enabled. Comfort Tone will be played. Access: Instant. AC INI-Param: ENABLECOMFORTTONE |
| logger | 1.3.6.1.4.1.5003.9.10.3.1.1.9 | |||
| INT loggerGwAppCdrReportLevel | 1.3.6.1.4.1.5003.9.10.3.1.1.9.1 | INTEGER | read-write | CDR reports timing. Access: Instant. AC INI-Param: N/A |
| INT loggerGwDebugLevel | 1.3.6.1.4.1.5003.9.10.3.1.1.9.2 | INTEGER | read-write | Configure different debug level. Access: Instant. AC INI-Param: N/A |
| IP loggerCDRSyslogServerIP | 1.3.6.1.4.1.5003.9.10.3.1.1.9.3 | IpAddress | read-write | Syslog server IP address for sending CDRs. Access: Instant. AC INI-Param: CDRSYSLOGSERVERIP |
| progressIndicators | 1.3.6.1.4.1.5003.9.10.3.1.1.10 | |||
| INT progressIndicators2ISDN | 1.3.6.1.4.1.5003.9.10.3.1.1.10.1 | INTEGER | read-write | Override the value of progress indicator to ISDN side in ALERT PROGRESS and PROCEEDING messages. Access: Instant. AC INI-Param: PROGRESSINDICATOR2ISDN |
| INT progressIndicators2IP | 1.3.6.1.4.1.5003.9.10.3.1.1.10.2 | INTEGER | read-write | Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: PROGRESSINDICATOR2IP |
| screeningIndicators | 1.3.6.1.4.1.5003.9.10.3.1.1.10.20 | |||
| INT screeningIndicators2Ip | 1.3.6.1.4.1.5003.9.10.3.1.1.10.20.1 | INTEGER | read-write | Override screening indicator value in Setup messages to IP. Access: Instant. AC INI-Param: SCREENINGIND2IP |
| INT screeningIndicators2ISDN | 1.3.6.1.4.1.5003.9.10.3.1.1.10.20.2 | INTEGER | read-write | Override screening indicator value in Setup messages to ISDN. Access: Instant. AC INI-Param: SCREENINGIND2ISDN |
| misc | 1.3.6.1.4.1.5003.9.10.3.1.1.11 | |||
| INT miscDisconnectOnBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.1 | INTEGER | read-write | Release call if gateway receives busy or fast busy tone before the call is answered. Access: Instant. AC INI-Param: DISCONNECTONBUSYTONE |
| INT miscDisconnectOnSilence | 1.3.6.1.4.1.5003.9.10.3.1.1.11.2 | INTEGER | read-write | Disconnect calls on a configured silence timeout. Access: Offline. AC INI-Param: ENABLESILENCEDISCONNECT |
| INT miscEnableBusyOut | 1.3.6.1.4.1.5003.9.10.3.1.1.11.3 | INTEGER | read-write | Take trunks out of service in case of LAN down. Access: Instant. AC INI-Param: ENABLEBUSYOUT |
| INT miscSecureCallsFromIp | 1.3.6.1.4.1.5003.9.10.3.1.1.11.4 | INTEGER | read-write | Gateway will only accept calls from IP addresses that are defined in the Tel to IP Routing table. Access: Instant. AC INI-Param: SECURECALLSFROMIP |
| STR miscStaticNATIP | 1.3.6.1.4.1.5003.9.10.3.1.1.11.5 | SnmpAdminString | read-write | static NAT IP, to be supported by the gateway. Access: Instant. AC INI-Param: STATICNATIP |
| U32 miscSilenceDisconnectTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.11.6 | Unsigned32 | read-write | Defines the Silence period to be detected. Access: Offline. AC INI-Param: FarEndDisconnectSilencePeriod |
| INT miscIsFaxUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.11.7 | INTEGER | read-write | Enable T.38 Fax signaling. Access: Instant. AC INI-Param: IsFaxUsed |
| U32 miscDelayTime | 1.3.6.1.4.1.5003.9.10.3.1.1.11.8 | Unsigned32 | read-write | Gateway delay time after reset (seconds). Access: Instant. AC INI-Param: GWAPPDelayTime |
| INT miscDetFaxOnAnswerTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.9 | INTEGER | read-write | Start T.38 fax procedure after fax answer tone detection or after HDLC preamble signal detection. Access: Instant. AC INI-Param: DETFAXONANSWERTONE |
| U32 miscDefaultReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.11.10 | Unsigned32 | read-write | The release cause that will be sent to IP or to Tel when gateway initiates release by itself. Access: Instant. AC INI-Param: DEFAULTRELEASECAUSE |
| INT miscT38UseRTPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.11.11 | INTEGER | read-write | T.38 packets will be received on RTP port. Access: Instant. AC INI-Param: T38USERTPPORT |
| U32 miscRFC2833PayloadType | 1.3.6.1.4.1.5003.9.10.3.1.1.11.12 | Unsigned32 | read-write | control the RFC 2833 Relay RTP Payload type. Access: Instant. AC INI-Param: RFC2833PayloadType |
| INT miscIsCiscoSceMode | 1.3.6.1.4.1.5003.9.10.3.1.1.11.13 | INTEGER | read-write | In use with G.729 - if enabled and SCE=2 then AnnexB=no. Access: Instant. AC INI-Param: ISCISCOSCEMODE |
| INT miscDisconnectOnDialTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.14 | INTEGER | read-write | Release call if gateway receives dial tone before the call is answered or during voice session. Access: Instant. AC INI-Param: DISCONNECTONDIALTONE |
| INT miscEnableSemiAttendedTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.11.15 | INTEGER | read-write | Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER |
| STR miscHookFlashCodeIP | 1.3.6.1.4.1.5003.9.10.3.1.1.11.16 | SnmpAdminString | read-write | The string represent HookFlash, when reported to or from IP. Currently used in H.323 only (H245UserOutput, H245Signal or Q931UserInfo). Access: Instant. AC INI-Param: HookFlashCodeIP |
| INT miscEnableFaxRerouting | 1.3.6.1.4.1.5003.9.10.3.1.1.11.17 | INTEGER | read-write | Enable rerouting of FAX calls to FAX destination. Access: Instant. AC INI-Param: ENABLEFAXREROUTING |
| U32 miscT38MaxDatagramSize | 1.3.6.1.4.1.5003.9.10.3.1.1.11.18 | Unsigned32 | read-write | T.38 coder - Max Datagram Size. Access: Instant. AC INI-Param: T38MAXDATAGRAMSIZE |
| INT miscIsdnDisconnectOnBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.11.19 | INTEGER | read-write | 1 - Release call if gateway receives busy or fast busy tone. 0 - don't release. Access: Instant. AC INI-Param: ISDNDISCONNECTONBUSYTONE |
| INT miscFaxCNGMode | 1.3.6.1.4.1.5003.9.10.3.1.1.11.20 | INTEGER | read-write | Enables sending of ReInvite on detection of FAX CNG tone when CNGDetectorMode=1. Access: Instant. AC INI-Param: FAXCNGMODE |
| U32 miscGracefulBusyOutTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.11.21 | Unsigned32 | read-write | Graceful Busy Out Timeout in seconds. Sets the time before a busy out signal will be sent to a trunk even if there are still active calls on the trunk. Access: Instant. AC INI-Param: GRACEFULBUSYOUTTIMEOUT |
| U32 miscT38FaxMaxBufferSize | 1.3.6.1.4.1.5003.9.10.3.1.1.11.22 | Unsigned32 | read-write | Defines the fax max buffer size in T38 SDP negotiation. Access: Instant. AC INI-Param: T38FAXMAXBUFFERSIZE |
| INT miscReliableConnectionPersistentMode | 1.3.6.1.4.1.5003.9.10.3.1.1.11.23 | INTEGER | read-write | if set to 1 - All TCP/TLS connections will be set as persistent and will not be released. Access: Instant. AC INI-Param: RELIABLECONNECTIONPERSISTENTMODE |
| IP miscWANIPAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.11.24 | InetAddress | read-write | Sets the WAN address to be used by VOIP signalling applications. Range = IPv4 address in dotted decimal notation xxx.xxx.xxx.xxx Default = 0.0.0.0. Access: Instant. AC INI-Param: WANIPAddress |
| INT miscEnableDelayedOffer | 1.3.6.1.4.1.5003.9.10.3.1.1.11.25 | INTEGER | read-write | Send INVITE message with/without sdp offer. [0] - (default) means SDP will be offered in the INVITE message. [1] - means SDP will be offered by the other side in the first reliable response(1xx or 200 OK INVITE). Access: Instant. AC INI-Param: ENABLEDELAYEDOFFER |
| INT miscEnableNRTSubscription | 1.3.6.1.4.1.5003.9.10.3.1.1.11.26 | INTEGER | read-write | Enable subscription for Call forward ringtone Indicator service. Access: Instant. AC INI-Param: ENABLENRTSUBSCRIPTION |
| I32 miscASSubscribeIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.11.27 | Integer32 | read-write | IPGroup ID for AS server subscribe purposes. Access: Instant. AC INI-Param: ASSUBSCRIBEIPGROUPID |
| U32 miscNRTSubscriptionRetryTime | 1.3.6.1.4.1.5003.9.10.3.1.1.11.28 | Unsigned32 | read-write | NRT service subscription retry time after last subscription failure (in seconds). Access: Instant. AC INI-Param: NRTSUBSCRIBERETRYTIME |
| U32 miscCallForwardRingToneID | 1.3.6.1.4.1.5003.9.10.3.1.1.11.29 | Unsigned32 | read-write | Ringtone type for Call forward notification. Access: Instant. AC INI-Param: CALLFORWARDRINGTONEID |
| STR miscKeyCallPickup | 1.3.6.1.4.1.5003.9.10.3.1.1.11.30 | SnmpAdminString | read-write | Keying sequence for performing call pickup. Access: Instant. AC INI-Param: KEYCALLPICKUP |
| INT miscEnableRFC4117Transcoding | 1.3.6.1.4.1.5003.9.10.3.1.1.11.31 | INTEGER | read-write | Enable transcoding call RFC4117. Access: Offline. AC INI-Param: ENABLERFC4117TRANSCODING |
| INT miscEnableSingleDSPTranscoding | 1.3.6.1.4.1.5003.9.10.3.1.1.11.32 | INTEGER | read-write | Enable/Disable using single DSP for g711 LBR coder. Access: Instant. AC INI-Param: ENABLESINGLEDSPTRANSCODING |
| INT miscEnableNetworkISDNTransfer | 1.3.6.1.4.1.5003.9.10.3.1.1.11.33 | INTEGER | read-write | if set to 0 reject ISDN transfer request. Access: Instant. AC INI-Param: ENABLENETWORKISDNTRANSFER |
| STR miscLDAPocsNumberAttributeName | 1.3.6.1.4.1.5003.9.10.3.1.1.11.34 | SnmpAdminString | read-write | The name of the attribute which represents the user OCS number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPOCSNUMATTRIBUTENAME |
| STR miscLDAPpbxNumberAttributeName | 1.3.6.1.4.1.5003.9.10.3.1.1.11.35 | SnmpAdminString | read-write | The name of the attribute which represents the user PBX number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPPBXNUMATTRIBUTENAME |
| STR miscLDAPMobileNumberAttributeName | 1.3.6.1.4.1.5003.9.10.3.1.1.11.36 | SnmpAdminString | read-write | The name of the attribute which represents the user Mobile number in the Microsoft AD data base. Access: Instant. AC INI-Param: MSLDAPMOBILENUMATTRIBUTENAME |
| resourceManagement | 1.3.6.1.4.1.5003.9.10.3.1.1.12 | |||
| U32 resourceManagementMaxActiveCalls | 1.3.6.1.4.1.5003.9.10.3.1.1.12.1 | Unsigned32 | read-write | Limit the number of calls that the gateway can handle at the same time. Access: Instant. AC INI-Param: MAXACTIVECALLS |
| INT resourceManagementIsSelfCheckAuditUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.12.2 | INTEGER | read-write | defines whether the resources self check audit is used. Access: Instant. AC INI-Param: ISSELFCHECKAUDITUSED |
| INT resourceManagementRejectCallsOnOverload | 1.3.6.1.4.1.5003.9.10.3.1.1.12.3 | INTEGER | read-write | Defines whether new calls will be rejected during overload period. Access: Instant. AC INI-Param: REJECTCALLSONOVERLOAD |
| INT resourceManagementDisconnectOnBrokenConnection | 1.3.6.1.4.1.5003.9.10.3.1.1.12.4 | INTEGER | read-write | Disconnect calls on receiving RTP broken notification. Access: Instant. AC INI-Param: DISCONNECTONBROKENCONNECTION |
| U32 resourceManagementMaxCallDuration | 1.3.6.1.4.1.5003.9.10.3.1.1.12.5 | Unsigned32 | read-write | Limit the call time duration (minutes) 0 = no limit. Access: Instant. AC INI-Param: MAXCALLDURATION |
| INT resourceManagementOverloadSensitivityLevel | 1.3.6.1.4.1.5003.9.10.3.1.1.12.6 | INTEGER | read-write | Defines when to enter overload state: 0:never 1:on very high utilization 2:on medium utilization. Access: Instant. AC INI-Param: OverloadSensitivityLevel |
| aMD | 1.3.6.1.4.1.5003.9.10.3.1.1.13 | |||
| U32 aMDTimeOut | 1.3.6.1.4.1.5003.9.10.3.1.1.13.1 | Unsigned32 | read-write | Amd Detection Timeout . Access: Instant. AC INI-Param: AMDTIMEOUT |
| aaa | 1.3.6.1.4.1.5003.9.10.3.1.1.14 | |||
| INT aaaIndications | 1.3.6.1.4.1.5003.9.10.3.1.1.14.1 | INTEGER | read-write | Which Authentication, Authorization and Accounting indications to use. Access: Instant. AC INI-Param: AAAINDICATIONS |
| INT aaaRadiusAccountingType | 1.3.6.1.4.1.5003.9.10.3.1.1.14.2 | INTEGER | read-write | When will Radius Acounting messages be sent. Access: Instant. AC INI-Param: RADIUSACCOUNTINGTYPE |
| profile | 1.3.6.1.4.1.5003.9.10.3.1.1.15 | |||
| iPProfileTable | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21 | not-accessible | ||
| iPProfileEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1 | not-accessible | ||
| U32 iPProfileIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.1 | Unsigned32 | not-accessible | Entry number, starting at 1. AC INI-Param: IpProfile_Index |
| ROW iPProfileRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT iPProfileAction | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT iPProfileActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 iPProfilePreference | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.5 | Unsigned32 | read-create | Preference. Access: Instant. AC INI-Param: IpProfile_IpPreference |
| STR iPProfileProfileName | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.6 | SnmpAdminString | read-create | Profile Name. Access: Instant. AC INI-Param: IpProfile_ProfileName |
| U32 iPProfileCodersGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.7 | Unsigned32 | read-create | Coders Group ID. Access: Instant. AC INI-Param: IpProfile_CodersGroupID |
| U32 iPProfileFaxTransportMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.8 | Unsigned32 | read-write | Fax Transport Mode. Access: Instant. AC INI-Param: N/A |
| INT iPProfileIsFaxUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.9 | INTEGER | read-create | Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1. Access: Instant. AC INI-Param: IpProfile_IsFaxUsed |
| U32 iPProfileDJBufMinDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.10 | Unsigned32 | read-create | Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: IpProfile_JitterBufMinDelay |
| U32 iPProfileDJBufOptFactor | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.11 | Unsigned32 | read-create | Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: IpProfile_JitterBufOptFactor |
| U32 iPProfileIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.12 | Unsigned32 | read-create | IP DiffServ byte value. Access: Instant. AC INI-Param: IpProfile_IPDiffServ |
| U32 iPProfileSigIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.13 | Unsigned32 | read-create | Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: IpProfile_SigIPDiffServ |
| INT iPProfileSCE | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.14 | INTEGER | read-create | Silence Suppression mode. Access: Instant. AC INI-Param: IpProfile_SCE |
| U32 iPProfileRTPRedundancyDepth | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.15 | Unsigned32 | read-create | Enables or disables generation of RFC 2198 redundancy packets. Access: Instant. AC INI-Param: IpProfile_RTPRedundancyDepth |
| U32 iPProfileRemoteBaseUDPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.16 | Unsigned32 | read-create | Remote Base UDP Port For Aggregation. Access: Instant. AC INI-Param: IpProfile_RemoteBaseUDPPort |
| INT iPProfileCngDetectorMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.17 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_CNGmode |
| INT iPProfileVxxModemTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.18 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_VxxTransportType |
| INT iPProfileNSEMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.19 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_NSEMode |
| INT iPProfilePlayRingbackToneToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.20 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_PlayRBTone2IP |
| INT iPProfileEnableEarlyMedia | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.21 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_EnableEarlyMedia |
| INT iPProfileProgressIndicatorToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.22 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_ProgressIndicator2IP |
| INT iPProfileECE | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.23 | INTEGER | read-create | Enables or disables the echo canceler. Access: Instant. AC INI-Param: IpProfile_EnableEchoCanceller |
| INT iPProfileMediaSecurityBehavior | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.24 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_MediaSecurityBehaviour |
| I32 iPProfileCallLimit | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.25 | Integer32 | read-create | Access: Instant. AC INI-Param: IpProfile_CallLimit |
| INT iPProfileDisconnectOnBrokenConnection | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.26 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_DisconnectOnBrokenConnection |
| INT iPProfileCopyDest2RedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.27 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_CopyDest2RedirectNumber |
| STR iPProfileAddIEInSetup | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.28 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IpProfile_AddIEInSetup |
| INT iPProfileRxDTMFOption | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.29 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_RxDTMFOption |
| INT iPProfileFirstTxDtmfOption | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.30 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_FirstTxDtmfOption |
| INT iPProfileSecondTxDtmfOption | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.31 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_SecondTxDtmfOption |
| INT iPProfileMediaIPVersionPreference | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.32 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_MediaIPVersionPreference |
| INT iPProfileSBCAllowedCodersGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.33 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersGroupID |
| INT iPProfileSBCAllowedCodersMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.34 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_SBCAllowedCodersMode |
| INT iPProfileSBCMediaSecurityBehaviour | 1.3.6.1.4.1.5003.9.10.3.1.1.15.21.1.35 | INTEGER | read-create | Access: Instant. AC INI-Param: IpProfile_SBCMediaSecurityBehaviour |
| telProfileTable | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22 | not-accessible | ||
| telProfileEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1 | not-accessible | ||
| U32 telProfileIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.1 | Unsigned32 | not-accessible | Entry number, starting at 1. AC INI-Param: TelProfile_Index |
| ROW telProfileRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT telProfileAction | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT telProfileActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 telProfilePreference | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.5 | Unsigned32 | read-create | Preference. Access: Instant. AC INI-Param: TelProfile_TelPreference |
| STR telProfileProfileName | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.6 | SnmpAdminString | read-create | Profile Name. Access: Instant. AC INI-Param: TelProfile_ProfileName |
| U32 telProfileCodersGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.7 | Unsigned32 | read-create | Coders Group ID. Access: Instant. AC INI-Param: TelProfile_CodersGroupID |
| U32 telProfileFaxTransportMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.8 | Unsigned32 | read-write | Fax Transport Mode. Access: Instant. AC INI-Param: N/A |
| INT telProfileIsFaxUsed | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.9 | INTEGER | read-create | Use H.323/Annex D procedure for real time FAX relay. To use this feature, disable inband DTMF by setting the FaxTransportMode to 1.0 - No fax , 1- T.38 , 2- Fax Fallback (G.711 with optimization). Access: Instant. AC INI-Param: TelProfile_IsFaxUsed |
| U32 telProfileDJBufMinDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.10 | Unsigned32 | read-create | Dynamic Jitter Buffer Minimum Delay (msec). Access: Instant. AC INI-Param: TelProfile_JitterBufMinDelay |
| U32 telProfileDJBufOptFactor | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.11 | Unsigned32 | read-create | Dynamic jitter buffer frame error/delay optimization. Access: Instant. AC INI-Param: TelProfile_JitterBufOptFactor |
| U32 telProfileIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.12 | Unsigned32 | read-create | IP DiffServ byte value. Access: Instant. AC INI-Param: TelProfile_IPDiffServ |
| U32 telProfileSigIPDiffServ | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.13 | Unsigned32 | read-create | Type Of Service bits in IP header of signalling messages. Access: Instant. AC INI-Param: TelProfile_SigIPDiffServ |
| I32 telProfileVoiceVolume | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.14 | Integer32 | read-create | Voice Volume. Access: Instant. AC INI-Param: TelProfile_VoiceVolume |
| I32 telProfileDTMFVolume | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.15 | Integer32 | read-create | DTMF Volume. Access: Instant. AC INI-Param: TelProfile_DtmfVolume |
| I32 telProfileInputGain | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.16 | Integer32 | read-create | Input Gain. Access: Instant. AC INI-Param: TelProfile_InputGain |
| INT telProfileEnableReversalPolarity | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.17 | INTEGER | read-create | FXO: Connect/Disconnect calls upon detection of polarity reversal signal. FXS: generate the signal. Access: Instant. AC INI-Param: TelProfile_EnableReversePolarity |
| INT telProfileEnableCurrentDisconnect | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.18 | INTEGER | read-create | Disconnect call upon detection of current disconnect signal. Access: Instant. AC INI-Param: TelProfile_EnableCurrentDisconnect |
| INT telProfileEnableDigitDelivery | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.19 | INTEGER | read-create | Enables Digit delivery to TEL side. Access: Instant. AC INI-Param: TelProfile_EnableDigitDelivery |
| INT telProfileECE | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.20 | INTEGER | read-create | Enables or disables the echo canceler. Access: Instant. AC INI-Param: TelProfile_EnableEC |
| INT telProfileMWIanalogLamp | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.21 | INTEGER | read-create | Enable MWI support using an analog lamp (110 Volt). Access: Instant. AC INI-Param: TelProfile_MWIAnalog |
| INT telProfileMWIDisplay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.22 | INTEGER | read-create | Enable MWI support using Caller ID interface. Access: Instant. AC INI-Param: TelProfile_MWIDisplay |
| U32 telProfileMaxFlashHookDetectionPeriod | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.23 | Unsigned32 | read-create | Access: Instant. AC INI-Param: TelProfile_FlashHookPeriod |
| INT telProfileEnableEarlyMedia | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.24 | INTEGER | read-create | Enable Early Media. Access: Instant. AC INI-Param: TelProfile_EnableEarlyMedia |
| INT telProfileProgressIndicatorToIP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.25 | INTEGER | read-create | Determine whether to send the Progress Indicator to IP. Access: Instant. AC INI-Param: TelProfile_ProgressIndicator2IP |
| U32 telProfileTimeForReorderTone | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.26 | Unsigned32 | read-create | Duration of reorder tone playing before FXO releases line. Access: Instant. AC INI-Param: TelProfile_TimeForReorderTone |
| INT telProfileEnableDIDWink | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.27 | INTEGER | read-create | Access: Instant. AC INI-Param: TelProfile_EnableDIDWink |
| INT telProfileIsTwoStageDial | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.28 | INTEGER | read-create | Access: Instant. AC INI-Param: TelProfile_IsTwoStageDial |
| INT telProfileDisconnectOnBusyTone | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.29 | INTEGER | read-create | Access: Instant. AC INI-Param: TelProfile_DisconnectOnBusyTone |
| INT telProfileEnableVoiceMailDelay | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.30 | INTEGER | read-create | Access: Instant. AC INI-Param: TelProfile_EnableVoiceMailDelay |
| I32 telProfileDialPlanIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.31 | Integer32 | read-create | Defines the plan index to be used from the external Dial Plan file. Access: Instant. AC INI-Param: TelProfile_DialPlanIndex |
| INT telProfileEnable911PSAP | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.32 | INTEGER | read-create | GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_Enable911PSAP |
| INT telProfileSwapTelToIpPhoneNumbers | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.33 | INTEGER | read-create | GwApp Tel Profile Table. Access: Instant. AC INI-Param: TelProfile_SwapTelToIpPhoneNumbers |
| INT telProfileEnableAGC | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.34 | INTEGER | read-create | Access: Instant. AC INI-Param: TelProfile_EnableAGC |
| INT telProfileECNlpMode | 1.3.6.1.4.1.5003.9.10.3.1.1.15.22.1.35 | INTEGER | read-create | Access: Instant. AC INI-Param: TelProfile_ECNlpMode |
| voiceMail | 1.3.6.1.4.1.5003.9.10.3.1.1.16 | |||
| INT voiceMailLineTransferMode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.1 | INTEGER | read-write | LineTransferMode: 0-ip 1-pbx blind transfer 2-pbx semi supv transfer 3-supervised transfer (also known as warm transfer). (in TP, feature key and parameter EnableIPMDetectors needed). Access: Instant. AC INI-Param: LineTransferMode |
| INT voiceMailInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.16.2 | INTEGER | read-write | Selects the method of communication between PBX and the Gateway, that is used instead of legacy voicemail. Access: Instant. AC INI-Param: VoiceMailInterface |
| vmDigitPattern | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20 | |||
| STR vmDigitPatternNoReason | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.1 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReason |
| STR vmDigitPatternOnBusy | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.2 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusy |
| STR vmDigitPatternOnNoAnswer | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.3 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswer |
| STR vmDigitPatternOnDND | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.4 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDND |
| STR vmDigitPatternInternalCall | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.5 | SnmpAdminString | read-write | Digit pattern used to indicate internal call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternInternalCall |
| STR vmDigitPatternExternalCall | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.6 | SnmpAdminString | read-write | Digit pattern used to indicate external call (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternExternalCall |
| STR vmDigitPatternDisconnectCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.7 | SnmpAdminString | read-write | Disconnect call if digit string is received from the TEL side during session. Access: Instant. AC INI-Param: TelDisconnectCode |
| STR vmDigitPatternConnectCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.8 | SnmpAdminString | read-write | Play Code string to Tel side when connect message recieved from IP side. Access: Instant. AC INI-Param: TELCONNECTCODE |
| STR vmDigitPatternVmDigitPatternOnBusyExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.9 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on busy (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnBusyExt |
| STR vmDigitPatternVmDigitPatternOnNoAnswerExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.10 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on no answer (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnNoAnswerExt |
| STR vmDigitPatternVmDigitPatternOnDNDExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.11 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardOnDNDExt |
| STR vmDigitPatternVmDigitPatternNoReasonExternal | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.12 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward with no reason (PBX to VoiceMail). Access: Instant. AC INI-Param: DigitPatternForwardNoReasonExt |
| STR vmDigitPatternDigitToIgnore | 1.3.6.1.4.1.5003.9.10.3.1.1.16.20.13 | SnmpAdminString | read-write | A digit (0-9,A-D,* or #) that if received as Src (S) or Redirect (R), the digit is ignored and not added to that number. Used in DTMF VoiceMail. Access: Instant. AC INI-Param: DigitPatternDigitToIgnore |
| vmMWI | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21 | |||
| STR vmMWIOnCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.1 | SnmpAdminString | read-write | Digit pattern used to notify PBX about messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOnCode |
| STR vmMWIOffCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.2 | SnmpAdminString | read-write | Digit pattern used to notify PBX about no messages waiting for extension (added as prefix). Access: Instant. AC INI-Param: MWIOffCode |
| STR vmMWISuffixCode | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.3 | SnmpAdminString | read-write | MWI suffix code used to notify PBX about messages waiting for extension (added as suffix to the extention number). Access: Instant. AC INI-Param: MWISuffixCode |
| STR vmMWISourceNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.16.21.4 | SnmpAdminString | read-write | The phone number sent as source number toward PSTN for MWI setup. Access: Instant. AC INI-Param: MWISOURCENUMBER |
| vmSMDI | 1.3.6.1.4.1.5003.9.10.3.1.1.16.22 | |||
| INT vmSMDIEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.16.22.1 | INTEGER | read-write | Enables the Simplified Message Desk Interface (SMDI). SMDI defines a method whereby telephony systems can provide voice-messaging systems with data required by those telephony systems to process incoming calls intelligently. Whenever the phone system routes a call, it sends an SMDI message through an EIA/TIA-232 connection to the voice-messaging system that tells it the line that it is using, the type of call that it is forwarding, and information about the source and destination of the call. 0 = Normal Serial 1 = Serial SMDI. Access: Offline. AC INI-Param: SMDI |
| U32 vmSMDITimeOut | 1.3.6.1.4.1.5003.9.10.3.1.1.16.22.2 | Unsigned32 | read-write | Time out for: 1. From SMDI Info until SETUP 2. From SETUP until SMDI event. Access: Instant. AC INI-Param: SMDITimeOut |
| digitalGWext | 1.3.6.1.4.1.5003.9.10.3.1.1.17 | |||
| INT digitalGWextEnableQSIGTunneling | 1.3.6.1.4.1.5003.9.10.3.1.1.17.1 | INTEGER | read-write | Enables QSIG Tunneling over SIP. Access: Instant. AC INI-Param: ENABLEQSIGTUNNELING |
| INT digitalGWextRemoveCLIWhenRestricted | 1.3.6.1.4.1.5003.9.10.3.1.1.17.2 | INTEGER | read-write | Removes CLI from IP->TEL calls if received CLI is restricted. Access: Instant. AC INI-Param: REMOVECLIWHENRESTRICTED |
| U32 digitalGWextDefaultCauseMapISDN2IP | 1.3.6.1.4.1.5003.9.10.3.1.1.17.3 | Unsigned32 | read-write | All ISDN release causes except normal, busy, no user responding, and no answer will be mapped to this cause, if set. Access: Instant. AC INI-Param: DEFAULTCAUSEMAPISDN2IP |
| INT digitalGWextISDNSubaddressFormat | 1.3.6.1.4.1.5003.9.10.3.1.1.17.4 | INTEGER | read-write | ISDN SubAdress format. Access: Instant. AC INI-Param: ISDNSUBADDRESSFORMAT |
| INT digitalGWextEnableAoC | 1.3.6.1.4.1.5003.9.10.3.1.1.17.5 | INTEGER | read-write | Enable AoC-D and AoC-E from ISDN to SIP. Access: Instant. AC INI-Param: ENABLEAOC |
| INT digitalGWextRemoveCallingName | 1.3.6.1.4.1.5003.9.10.3.1.1.17.6 | INTEGER | read-write | If set to 1 - Removes Calling Name from IP->TEL calls. Access: Instant. AC INI-Param: REMOVECALLINGNAME |
| INT digitalGWextCopyDest2RedirectNumber | 1.3.6.1.4.1.5003.9.10.3.1.1.17.7 | INTEGER | read-write | 0 - Redirect N not affected,1- Called N after manipulation from TEL2IP call will also be used as Redirect N,2 - the Called N before manipulation - as Redirect N. Access: Instant. AC INI-Param: COPYDEST2REDIRECTNUMBER |
| U32 digitalGWextTDMOverIPMinCallsForTrunkActivation | 1.3.6.1.4.1.5003.9.10.3.1.1.17.8 | Unsigned32 | read-write | Minimum connected calls for trunk activation while in TDMOverIPMode if 0 - trunk is always active. Access: Instant. AC INI-Param: TDMOVERIPMINCALLSFORTRUNKACTIVATION |
| rtpOnlyModeForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21 | not-accessible | ||
| rtpOnlyModeForTrunkEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1 | not-accessible | ||
| U32 rtpOnlyModeForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1.1 | Unsigned32 | not-accessible | Trunk number. AC INI-Param: N/A |
| INT rtpOnlyModeForTrunkRtpOnlyModeForTrunk | 1.3.6.1.4.1.5003.9.10.3.1.1.17.21.1.2 | INTEGER | read-write | immediately. -1 - takes the RTPONLYMODE global value per gatewa 0 - regular call establishment. 1 - The RTP channel open for Rx & Tx. 2-The RTP channel open only for Tx 3 -The RTP channel open only fo Rx. Access: Instant. AC INI-Param: RTPONLYMODEFORTRUNK |
| acBChannelNegotiationForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22 | not-accessible | B-Channel Negotiation for Trunk table. | |
| acBChannelNegotiationForTrunkEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1 | not-accessible | ||
| U32 acBChannelNegotiationForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1.1 | Unsigned32 | not-accessible | Trunk number starting at 0. AC INI-Param: N/A |
| INT acBChannelNegotiationForTrunkMode | 1.3.6.1.4.1.5003.9.10.3.1.1.17.22.1.2 | INTEGER | read-write | ISDN B-Channel negotiation mode for trunk put MODE_NOT_SET (-1) to use BCHANNELNEGOTIATION per Gateway. Access: Instant. AC INI-Param: BCHANNELNEGOTIATIONFORTRUNK |
| acDigitalOOSBehaviorForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23 | not-accessible | Digital OOS Behavior for Trunk table. | |
| acDigitalOOSBehaviorForTrunkEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1 | not-accessible | ||
| U32 acDigitalOOSBehaviorForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1.1 | Unsigned32 | not-accessible | Trunk number starting at 0. AC INI-Param: N/A |
| INT acDigitalOOSBehaviorForTrunkValue | 1.3.6.1.4.1.5003.9.10.3.1.1.17.23.1.2 | INTEGER | read-write | Digital OOS Behavior for trunk put OOS_NOT_SET (-1) to use DIGITALOOSBEHAVIOR per Gateway. Access: Instant. AC INI-Param: DIGITALOOSBEHAVIORFORTRUNK |
| acRemoveCallingNameForTrunkTable | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24 | not-accessible | Remove Calling Name For Trunk table. | |
| acRemoveCallingNameForTrunkEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1 | not-accessible | ||
| U32 acRemoveCallingNameForTrunkIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1.1 | Unsigned32 | not-accessible | Trunk number starting at 0. AC INI-Param: N/A |
| INT acRemoveCallingNameForTrunkMode | 1.3.6.1.4.1.5003.9.10.3.1.1.17.24.1.2 | INTEGER | read-write | Remove Calling Name For Trunk table .Set (-1) to use the global parameter digitalGWextRemoveCallingName. Access: Instant. AC INI-Param: RemoveCallingNameForTrunk |
| gwSecurity | 1.3.6.1.4.1.5003.9.10.3.1.1.18 | |||
| INT gwSecurityMediaSecurityBehavior | 1.3.6.1.4.1.5003.9.10.3.1.1.18.1 | INTEGER | read-write | Gateway behavior when recieving offer/response for media encryption. Access: Instant. AC INI-Param: MEDIASECURITYBEHAVIOUR |
| INT gwSecuritySIPSRequireClientCertificate | 1.3.6.1.4.1.5003.9.10.3.1.1.18.2 | INTEGER | read-write | Should require client certificate upon TLS connection request arrival. Access: Offline. AC INI-Param: SIPSREQUIRECLIENTCERTIFICATE |
| U32 gwSecurityTLSReHandshakeInterval | 1.3.6.1.4.1.5003.9.10.3.1.1.18.3 | Unsigned32 | read-write | The interval between consequent TLS re-handshakes (Minutes). 0 - Disables re-handshakes. Access: Instant. AC INI-Param: TLSREHANDSHAKEINTERVAL |
| INT gwSecurityPeerHostNameVerificationMode | 1.3.6.1.4.1.5003.9.10.3.1.1.18.4 | INTEGER | read-write | While using TLS, defines the verification behavior of the host name sent in the certificate. Access: Instant. AC INI-Param: PEERHOSTNAMEVERIFICATIONMODE |
| INT gwSecurityVerifyServerCertificate | 1.3.6.1.4.1.5003.9.10.3.1.1.18.5 | INTEGER | read-write | Certificate validation behavior 0 - No certificate validation. 1 - Server certificate validation. Access: Instant. AC INI-Param: VERIFYSERVERCERTIFICATE |
| STR gwSecurityTLSRemoteSubjectName | 1.3.6.1.4.1.5003.9.10.3.1.1.18.6 | SnmpAdminString | read-write | used to verify the remote peer Common Name (at certificate) when using TLS. Access: Instant. AC INI-Param: TLSREMOTESUBJECTNAME |
| INT gwSecuritySRTPofferedSuites | 1.3.6.1.4.1.5003.9.10.3.1.1.18.7 | INTEGER | read-write | Offered SRTP Cipher Suites. Access: Instant. AC INI-Param: SRTPOFFEREDSUITES |
| acGWRtcpXr | 1.3.6.1.4.1.5003.9.10.3.1.1.19 | |||
| STR acGWRtcpXrEscIP | 1.3.6.1.4.1.5003.9.10.3.1.1.19.1 | SnmpAdminString | read-write | RTCP-XR server IP address. Access: Instant. AC INI-Param: RtcpXrEscIP |
| INT acGWRtcpXrReportMode | 1.3.6.1.4.1.5003.9.10.3.1.1.19.2 | INTEGER | read-write | 0:rtcpxr is not sent over SIP at all 1:rtcpxr is sent over sip when call ended 2:rtcpxr is sent over sip when on periodic interval and when call ended . Access: Instant. AC INI-Param: RtcpXrReportMode |
| INT acGWRtcpXrEscTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.19.3 | INTEGER | read-write | RtcpXrEsc transport type. Access: Instant. AC INI-Param: RTCPXRESCTRANSPORTTYPE |
| acTimers | 1.3.6.1.4.1.5003.9.10.3.1.1.20 | |||
| U32 acTimersIPAlertTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.20.1 | Unsigned32 | read-write | Maximal time to wait for connect from IP (seconds). Access: Instant. AC INI-Param: IPALERTTIMEOUT |
| U32 acTimersPSTNAlertTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.20.2 | Unsigned32 | read-write | Max time (in seconds) to wait for connect from PSTN. Access: Instant. AC INI-Param: PSTNALERTTIMEOUT |
| acEmergency | 1.3.6.1.4.1.5003.9.10.3.1.1.21 | |||
| U32 acEmergencyRegretTimeout | 1.3.6.1.4.1.5003.9.10.3.1.1.21.1 | Unsigned32 | read-write | [min] Regret time for call that is marked as Emergency. Access: Instant. AC INI-Param: EmergencyRegretTimeout |
| acEmergencyNumbersTable | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21 | not-accessible | Emergency numbers table. | |
| acEmergencyNumbersEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1 | not-accessible | ||
| U32 acEmergencyNumbersIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1.1 | Unsigned32 | not-accessible | Emergency numbers, starting at 0. AC INI-Param: N/A |
| STR acEmergencyNumbersNumbers | 1.3.6.1.4.1.5003.9.10.3.1.1.21.21.1.2 | SnmpAdminString | read-write | Emergency numbers. Access: Instant. AC INI-Param: EmergencyNumbers |
| accounts | 1.3.6.1.4.1.5003.9.10.3.1.1.22 | |||
| accountTable | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21 | not-accessible | GwApp Accounts table | |
| accountEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1 | not-accessible | table | |
| U32 accountIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.1 | Unsigned32 | read-only | . AC INI-Param: Account_Index |
| ROW accountRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT accountAction | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT accountActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| I32 accountServedTrunkGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.5 | Integer32 | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedTrunkGroup |
| I32 accountServedIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.6 | Integer32 | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServedIPGroup |
| I32 accountServingIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.7 | Integer32 | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ServingIPGroup |
| STR accountUsername | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.8 | SnmpAdminString | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_Username |
| STR accountPassword | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.9 | SnmpAdminString | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_Password |
| STR accountHostName | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.10 | SnmpAdminString | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_HostName |
| INT accountRegister | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.11 | INTEGER | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_Register |
| STR accountContactUser | 1.3.6.1.4.1.5003.9.10.3.1.1.22.21.1.12 | SnmpAdminString | read-create | GwApp Accounts table. Access: Instant. AC INI-Param: Account_ContactUser |
| ipGroups | 1.3.6.1.4.1.5003.9.10.3.1.1.23 | |||
| ipGroupTable | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21 | not-accessible | GwApp IP Group Table | |
| ipGroupEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1 | not-accessible | table | |
| U32 ipGroupIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.1 | Unsigned32 | read-only | . AC INI-Param: IPGroup_Index |
| ROW ipGroupRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT ipGroupAction | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT ipGroupActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT ipGroupType | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.5 | INTEGER | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Type |
| STR ipGroupDescription | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.6 | SnmpAdminString | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_Description |
| I32 ipGroupProxySetId | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.7 | Integer32 | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ProxySetId |
| STR ipGroupSIPGroupName | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.8 | SnmpAdminString | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SIPGroupName |
| STR ipGroupContactUser | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.9 | SnmpAdminString | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ContactUser |
| INT ipGroupEnableSurvivability | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.10 | INTEGER | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_EnableSurvivability |
| I32 ipGroupServingIPGroup | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.11 | Integer32 | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_ServingIPGroup |
| INT ipGroupSipReRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.12 | INTEGER | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_SipReRoutingMode |
| INT ipGroupAlwaysUseRouteTable | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.13 | INTEGER | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_AlwaysUseRouteTable |
| INT ipGroupRoutingMode | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.14 | INTEGER | read-create | GwApp IP Group Table. Access: Instant. AC INI-Param: IPGroup_RoutingMode |
| U32 ipGroupProfileId | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.15 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPGroup_ProfileId |
| STR ipGroupMediaRealm | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.16 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPGroup_MediaRealm |
| I32 ipGroupMaxNumOfRegUsers | 1.3.6.1.4.1.5003.9.10.3.1.1.23.21.1.17 | Integer32 | read-create | Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: IPGroup_MaxNumOfRegUsers |
| sbc | 1.3.6.1.4.1.5003.9.10.3.1.1.24 | |||
| INT sbcEnable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.1 | INTEGER | read-write | Enables SBC functionality. Access: Instant. AC INI-Param: ENABLESBC |
| U32 sbcRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.1.24.2 | Unsigned32 | read-write | Expires value SBC responds to user with. Used when server is offline or when the user is behind NAT. Otherwise expires is defined by the server. Access: Instant. AC INI-Param: SBCREGISTRATIONTIME |
| INT sbcEnableISBCApplication | 1.3.6.1.4.1.5003.9.10.3.1.1.24.3 | INTEGER | read-write | Enables SBC functionality. Access: Offline. AC INI-Param: ENABLESBCAPPLICATION |
| INT sbcEnableIIP2IPApplication | 1.3.6.1.4.1.5003.9.10.3.1.1.24.4 | INTEGER | read-write | Enables IP2IP functionality. Access: Offline. AC INI-Param: ENABLEIP2IPAPPLICATION |
| sbcClassificationTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21 | not-accessible | GwApp Classification Table | |
| sbcClassificationEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1 | not-accessible | ||
| U32 sbcClassificationIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.1 | Unsigned32 | read-only | . AC INI-Param: Classification_Index |
| ROW sbcClassificationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcClassificationAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcClassificationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| I32 sbcClassificationSrcIPGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.5 | Integer32 | read-create | Source IP group ID. Access: Instant. AC INI-Param: Classification_SrcIPGroupID |
| I32 sbcClassificationSrcSRDId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.6 | Integer32 | read-create | Source SRD ID. Access: Instant. AC INI-Param: Classification_SrcSRDID |
| STR sbcClassificationSrcAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.7 | SnmpAdminString | read-create | Source address. Access: Instant. AC INI-Param: Classification_SrcAddress |
| STR sbcClassificationSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.8 | SnmpAdminString | read-create | Source username prefix. Access: Instant. AC INI-Param: Classification_SrcUsernamePrefix |
| STR sbcClassificationSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.9 | SnmpAdminString | read-create | Source host. Access: Instant. AC INI-Param: Classification_SrcHost |
| STR sbcClassificationDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.10 | SnmpAdminString | read-create | Destination username prefix. Access: Instant. AC INI-Param: Classification_DestUsernamePrefix |
| STR sbcClassificationDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.21.1.11 | SnmpAdminString | read-create | Destination host. Access: Instant. AC INI-Param: Classification_DestHost |
| sbcRoutingTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22 | not-accessible | GwApp SBC Routing Table | |
| sbcRoutingEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1 | not-accessible | ||
| U32 sbcRoutingIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.1 | Unsigned32 | read-only | . AC INI-Param: IP2IPRouting_Index |
| ROW sbcRoutingRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcRoutingAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcRoutingActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| I32 sbcRoutingSrcIPGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.5 | Integer32 | read-create | Source IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_SrcIPGroupID |
| STR sbcRoutingSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.6 | SnmpAdminString | read-create | Source username prefix. Access: Instant. AC INI-Param: IP2IPRouting_SrcUsernamePrefix |
| STR sbcRoutingSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.7 | SnmpAdminString | read-create | Source host. Access: Instant. AC INI-Param: IP2IPRouting_SrcHost |
| STR sbcRoutingDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.8 | SnmpAdminString | read-create | Destination username prefix. Access: Instant. AC INI-Param: IP2IPRouting_DestUsernamePrefix |
| STR sbcRoutingDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.9 | SnmpAdminString | read-create | Destination host. Access: Instant. AC INI-Param: IP2IPRouting_DestHost |
| INT sbcRoutingDestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.10 | INTEGER | read-create | Destination type. Access: Instant. AC INI-Param: IP2IPRouting_DestType |
| I32 sbcRoutingDestIPGroupId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.11 | Integer32 | read-create | Destination IP group ID. Access: Instant. AC INI-Param: IP2IPRouting_DestIPGroupID |
| I32 sbcRoutingDestSRDId | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.12 | Integer32 | read-create | Destination SRD ID. Access: Instant. AC INI-Param: IP2IPRouting_DestSRDID |
| STR sbcRoutingDestAddress | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.13 | SnmpAdminString | read-create | Destination Address. Access: Instant. AC INI-Param: IP2IPRouting_DestAddress |
| U32 sbcRoutingDestPort | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.14 | Unsigned32 | read-create | Destination Port number. Access: Instant. AC INI-Param: IP2IPRouting_DestPort |
| INT sbcRoutingDestTransportType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.15 | INTEGER | read-create | Destination transport type. Access: Instant. AC INI-Param: IP2IPRouting_DestTransportType |
| INT sbcRoutingAltRouteOptions | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.16 | INTEGER | read-create | Alternative Route Options. Access: Instant. AC INI-Param: IP2IPRouting_AltRouteOptions |
| INT sbcRoutingRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.22.1.17 | INTEGER | read-create | Request Type. Access: Instant. AC INI-Param: IP2IPRouting_RequestType |
| sbcIP2IPInboundManipulationTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23 | not-accessible | GwApp IP Inbound Manipulation Table | |
| sbcIP2IPInboundManipulationEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1 | not-accessible | ||
| U32 sbcIP2IPInboundManipulationIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.1 | Unsigned32 | read-only | . AC INI-Param: IPInboundManipulation_Index |
| ROW sbcIP2IPInboundManipulationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcIP2IPInboundManipulationAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcIP2IPInboundManipulationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcIP2IPInboundManipulationIsAdditionalManipulation | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.5 | INTEGER | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_IsAdditionalManipulation |
| INT sbcIP2IPInboundManipulationManipulatedURI | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.6 | INTEGER | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_ManipulatedURI |
| I32 sbcIP2IPInboundManipulationSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.7 | Integer32 | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_SrcIPGroupID |
| STR sbcIP2IPInboundManipulationSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.8 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_SrcUsernamePrefix |
| STR sbcIP2IPInboundManipulationSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.9 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_SrcHost |
| STR sbcIP2IPInboundManipulationDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.10 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_DestUsernamePrefix |
| STR sbcIP2IPInboundManipulationDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.11 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_DestHost |
| U32 sbcIP2IPInboundManipulationRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.12 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromLeft |
| U32 sbcIP2IPInboundManipulationRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.13 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_RemoveFromRight |
| U32 sbcIP2IPInboundManipulationLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.14 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_LeaveFromRight |
| STR sbcIP2IPInboundManipulationPrefix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.15 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_Prefix2Add |
| STR sbcIP2IPInboundManipulationSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.16 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_Suffix2Add |
| INT sbcIP2IPInboundManipulationRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.23.1.17 | INTEGER | read-create | Access: Instant. AC INI-Param: IPInboundManipulation_RequestType |
| sbcIP2IPOutboundManipulationTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24 | not-accessible | GwApp IP Outbound Manipulation Table | |
| sbcIP2IPOutboundManipulationEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1 | not-accessible | ||
| U32 sbcIP2IPOutboundManipulationIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.1 | Unsigned32 | read-only | . AC INI-Param: IPOutboundManipulation_Index |
| ROW sbcIP2IPOutboundManipulationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcIP2IPOutboundManipulationAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcIP2IPOutboundManipulationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcIP2IPOutboundManipulationIsAdditionalManipulation | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.5 | INTEGER | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_IsAdditionalManipulation |
| INT sbcIP2IPOutboundManipulationManipulatedURI | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.6 | INTEGER | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_ManipulatedURI |
| I32 sbcIP2IPOutboundManipulationSrcIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.7 | Integer32 | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_SrcIPGroupID |
| I32 sbcIP2IPOutboundManipulationDestIPGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.8 | Integer32 | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_DestIPGroupID |
| STR sbcIP2IPOutboundManipulationSrcUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.9 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_SrcUsernamePrefix |
| STR sbcIP2IPOutboundManipulationSrcHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.10 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_SrcHost |
| STR sbcIP2IPOutboundManipulationDestUsernamePrefix | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.11 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_DestUsernamePrefix |
| STR sbcIP2IPOutboundManipulationDestHost | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.12 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_DestHost |
| U32 sbcIP2IPOutboundManipulationRemoveFromLeft | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.13 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromLeft |
| U32 sbcIP2IPOutboundManipulationRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.14 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_RemoveFromRight |
| U32 sbcIP2IPOutboundManipulationLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.15 | Unsigned32 | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_LeaveFromRight |
| STR sbcIP2IPOutboundManipulationPrefix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.16 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_Prefix2Add |
| STR sbcIP2IPOutboundManipulationSuffix2Add | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.17 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_Suffix2Add |
| INT sbcIP2IPOutboundManipulationRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.24.1.18 | INTEGER | read-create | Access: Instant. AC INI-Param: IPOutboundManipulation_RequestType |
| sbcAdmissionControlTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25 | not-accessible | GwApp SBC SIP Admission Control Table | |
| sbcAdmissionControlEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1 | not-accessible | ||
| U32 sbcAdmissionControlIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.1 | Unsigned32 | read-only | . AC INI-Param: SBCAdmissionControl_Index |
| ROW sbcAdmissionControlRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcAdmissionControlAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcAdmissionControlActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcAdmissionControlLimitType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.5 | INTEGER | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_LimitType |
| I32 sbcAdmissionControlIpGroupID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.6 | Integer32 | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_IPGroupID |
| I32 sbcAdmissionControlSrdID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.7 | Integer32 | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_SRDID |
| INT sbcAdmissionControlRequestType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.8 | INTEGER | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_RequestType |
| INT sbcAdmissionControlRequestDirection | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.9 | INTEGER | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_RequestDirection |
| I32 sbcAdmissionControlLimit | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.10 | Integer32 | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_Limit |
| I32 sbcAdmissionControlLimitPerUser | 1.3.6.1.4.1.5003.9.10.3.1.1.24.25.1.11 | Integer32 | read-create | Access: Instant. AC INI-Param: SBCAdmissionControl_LimitPerUser |
| sbcMessageManipulationsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26 | not-accessible | SBC Message Manipulations Table. | |
| sbcMessageManipulationsEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1 | not-accessible | ||
| U32 sbcMessageManipulationsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.1 | Unsigned32 | read-only | . AC INI-Param: MessageManipulations_Index |
| ROW sbcMessageManipulationsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcMessageManipulationsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcMessageManipulationsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 sbcMessageManipulationsManipulationSetID | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.5 | Unsigned32 | read-create | Manipulation Set ID. Access: Instant. AC INI-Param: MessageManipulations_ManSetID |
| STR sbcMessageManipulationsMessageType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.6 | SnmpAdminString | read-create | Message type. Access: Instant. AC INI-Param: MessageManipulations_MessageType |
| STR sbcMessageManipulationsCondition | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.7 | SnmpAdminString | read-create | Message manipulation Condition. Access: Instant. AC INI-Param: MessageManipulations_Condition |
| STR sbcMessageManipulationsActionSubject | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.8 | SnmpAdminString | read-create | Message manipulation Action Subject. Access: Instant. AC INI-Param: MessageManipulations_ActionSubject |
| INT sbcMessageManipulationsActionType | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.9 | INTEGER | read-create | Message manipulation Action type. Access: Instant. AC INI-Param: MessageManipulations_ActionType |
| STR sbcMessageManipulationsActionValue | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.10 | SnmpAdminString | read-create | Message manipulation Action value. Access: Instant. AC INI-Param: MessageManipulations_ActionValue |
| INT sbcMessageManipulationsRowRole | 1.3.6.1.4.1.5003.9.10.3.1.1.24.26.1.11 | INTEGER | read-create | Message manipulation row rule. Access: Instant. AC INI-Param: MessageManipulations_RowRole |
| sbcAlternativeRoutingReasonsTable | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27 | not-accessible | GwApp Reasons For Alternative Routing For SBC Application(IP to IP) Table | |
| sbcAlternativeRoutingReasonsEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1 | not-accessible | ||
| U32 sbcAlternativeRoutingReasonsIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.1 | Unsigned32 | read-only | . AC INI-Param: SBCAlternativeRoutingReasons_Index |
| ROW sbcAlternativeRoutingReasonsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sbcAlternativeRoutingReasonsAction | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sbcAlternativeRoutingReasonsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 sbcAlternativeRoutingReasonsReleaseCause | 1.3.6.1.4.1.5003.9.10.3.1.1.24.27.1.5 | Unsigned32 | read-create | Release Cause. Access: Instant. AC INI-Param: SBCAlternativeRoutingReasons_ReleaseCause |
| gwIPv6 | 1.3.6.1.4.1.5003.9.10.3.1.1.25 | |||
| INT gwIPv6GwAppDualIPStackSDPMethod | 1.3.6.1.4.1.5003.9.10.3.1.1.25.1 | INTEGER | read-write | 0. Always offer a single (preferrable) media IP address. 1. ANAT - Construct offer using ANAT semantics (RFC 4091 & RFC 4092) . Access: Instant. AC INI-Param: DUALIPSTACKSDPMETHOD |
| I32 gwIPv6GwAppPrimaryMediaInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.25.2 | Integer32 | read-write | Primary media interface to be used within SDP. Access: Instant. AC INI-Param: PRIMARYMEDIAINTERFACE |
| I32 gwIPv6GwAppSecondaryMediaInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.25.3 | Integer32 | read-write | Secondary media interface to be used within SDP. Access: Instant. AC INI-Param: SECONDARYMEDIAINTERFACE |
| INT gwIPv6MediaIPVersionPreference | 1.3.6.1.4.1.5003.9.10.3.1.1.25.4 | INTEGER | read-write | Select the preferred Media IP version. Access: Instant. AC INI-Param: MEDIAIPVERSIONPREFERENCE |
| srdSettings | 1.3.6.1.4.1.5003.9.10.3.1.1.26 | |||
| srdTable | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21 | not-accessible | GwApp Signaling Routing Domain (SRD) Table | |
| srdEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1 | not-accessible | ||
| U32 srdIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.1 | Unsigned32 | read-only | . AC INI-Param: SRD_Index |
| ROW srdRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT srdAction | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT srdActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR srdName | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.5 | SnmpAdminString | read-create | GwApp Signaling Routing Domain name. Access: Instant. AC INI-Param: SRD_Name |
| STR srdMediaRealm | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.6 | SnmpAdminString | read-create | GwApp Signaling Routing Domain media realm. Access: Instant. AC INI-Param: SRD_MediaRealm |
| INT srdIntraSRDMediaAnchoring | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.7 | INTEGER | read-create | Internal SRD Media Anchoring. Access: Offline. AC INI-Param: SRD_IntraSRDMediaAnchoring |
| INT srdBlockUnRegUsers | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.8 | INTEGER | read-create | Block Calls From Unregistered User. Access: Offline. AC INI-Param: SRD_BlockUnRegUsers |
| I32 srdMaxNumOfRegUsers | 1.3.6.1.4.1.5003.9.10.3.1.1.26.21.1.9 | Integer32 | read-create | Max Number Of Registered Users. MP1xx - 25 M1K - 200 M2K- 250 M3K - 3000. Access: Offline. AC INI-Param: SRD_MaxNumOfRegUsers |
| sipInterfaceSettings | 1.3.6.1.4.1.5003.9.10.3.1.1.27 | |||
| sipInterfaceTable | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21 | not-accessible | GwApp SIP Interface Table | |
| sipInterfaceEntry | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1 | not-accessible | ||
| U32 sipInterfaceIndex | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.1 | Unsigned32 | read-only | . AC INI-Param: SIPInterface_Index |
| ROW sipInterfaceRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sipInterfaceAction | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sipInterfaceActionResult | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR sipInterfaceNetworkInterface | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.5 | SnmpAdminString | read-create | Network Interface. Access: Instant. AC INI-Param: SIPInterface_NetworkInterface |
| INT sipInterfaceApplicationType | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.6 | INTEGER | read-create | Application Type. Access: Instant. AC INI-Param: SIPInterface_ApplicationType |
| U32 sipInterfaceUDPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.7 | Unsigned32 | read-create | UDP Port number. Access: Instant. AC INI-Param: SIPInterface_UDPPort |
| U32 sipInterfaceTCPPort | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.8 | Unsigned32 | read-create | TCP Port number. Access: Instant. AC INI-Param: SIPInterface_TCPPort |
| U32 sipInterfaceTLSPort | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.9 | Unsigned32 | read-create | TLS Port number. Access: Instant. AC INI-Param: SIPInterface_TLSPort |
| U32 sipInterfaceSRD | 1.3.6.1.4.1.5003.9.10.3.1.1.27.21.1.10 | Unsigned32 | read-create | Access: Instant. AC INI-Param: SIPInterface_SRD |
| sip | 1.3.6.1.4.1.5003.9.10.3.1.2 | |||
| sipProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1 | |||
| INT sipProxyUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.1.1 | INTEGER | read-write | Is SIP Proxy used. Access: Instant. AC INI-Param: ISPROXYUSED |
| INT sipProxyEnableKeepAlive | 1.3.6.1.4.1.5003.9.10.3.1.2.1.2 | INTEGER | read-write | Enable Proxy Keep-Alive over OPTIONS method or REGISTER method. Access: Instant. AC INI-Param: ENABLEPROXYKEEPALIVE |
| STR sipProxyName | 1.3.6.1.4.1.5003.9.10.3.1.2.1.3 | SnmpAdminString | read-write | SIP Proxy name. Access: Instant. AC INI-Param: PROXYNAME |
| INT sipProxyIsHotSwap | 1.3.6.1.4.1.5003.9.10.3.1.2.1.4 | INTEGER | read-write | Enable Proxy Hot-Swap mode. Access: Instant. AC INI-Param: ISPROXYHOTSWAP |
| U32 sipProxyHotSwapRtx | 1.3.6.1.4.1.5003.9.10.3.1.2.1.5 | Unsigned32 | read-write | Number of Rtx before Hotswap is performed. Access: Instant. AC INI-Param: PROXYHOTSWAPRTX |
| INT sipProxyRedundancyMode | 1.3.6.1.4.1.5003.9.10.3.1.2.1.6 | INTEGER | read-write | Redundancy Mode - Parking on active proxy or switching to main Proxy whenever online. Access: Instant. AC INI-Param: PROXYREDUNDANCYMODE |
| INT sipProxyAlwaysUseRouteTable | 1.3.6.1.4.1.5003.9.10.3.1.2.1.7 | INTEGER | read-write | Always use routing table even though proxy is available. Access: Instant. AC INI-Param: ALWAYSUSEROUTETABLE |
| INT sipProxyAlwaysSendToProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1.8 | INTEGER | read-write | Send all messages to Proxy server. Access: Instant. AC INI-Param: ALWAYSSENDTOPROXY |
| U32 sipProxyKeepAliveTime | 1.3.6.1.4.1.5003.9.10.3.1.2.1.9 | Unsigned32 | read-write | Time interval between Proxy Keep-Alive messages (seconds). Access: Instant. AC INI-Param: ProxyKeepAliveTime |
| INT sipProxyIsFallbackUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.1.10 | INTEGER | read-write | Allow fallback to internal Tel to IP routing table if Proxy is not responding. Access: Instant. AC INI-Param: IsFallbackUsed |
| INT sipProxySendInviteToProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1.11 | INTEGER | read-write | Always send INVITE messages to Proxy server. Access: Instant. AC INI-Param: SENDINVITETOPROXY |
| INT sipProxyIsTrustedProxy | 1.3.6.1.4.1.5003.9.10.3.1.2.1.12 | INTEGER | read-write | Determine whether the proxy is a trusted node. Access: Instant. AC INI-Param: ISTRUSTEDPROXY |
| INT sipProxyUseGatewayNameForOptions | 1.3.6.1.4.1.5003.9.10.3.1.2.1.13 | INTEGER | read-write | Use Gateway name (instead of IP address) in Keep-Alive OPTIONS messages. Access: Instant. AC INI-Param: USEGATEWAYNAMEFOROPTIONS |
| INT sipProxyEnableSRVQuery | 1.3.6.1.4.1.5003.9.10.3.1.2.1.14 | INTEGER | read-write | Enable DNS SRV queries for Proxy domain name. Access: Instant. AC INI-Param: ENABLEPROXYSRVQUERY |
| INT sipProxyDNSQueryType | 1.3.6.1.4.1.5003.9.10.3.1.2.1.15 | INTEGER | read-write | DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE |
| INT sipProxyLoadBalancingMethod | 1.3.6.1.4.1.5003.9.10.3.1.2.1.16 | INTEGER | read-write | Method of the proxies load balancing: 0 - Disabled (default) 1 - RoundRobin 2 - Random SRV Weights. Access: Instant. AC INI-Param: PROXYLOADBALANCINGMETHOD |
| U32 sipProxyIPListRefreshTime | 1.3.6.1.4.1.5003.9.10.3.1.2.1.17 | Unsigned32 | read-write | Time interval between refresh of proxies list (seconds). For example SRV query will be done every ProxyIPListRefreshTime seconds. Access: Instant. AC INI-Param: PROXYIPLISTREFRESHTIME |
| proxyIPTable | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21 | not-accessible | The table defines phone numbers for gateway endpoints. The endpoints that aren't defined will be disabled. | |
| proxyIPEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1 | not-accessible | ||
| U32 proxyIPIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: ProxyIp_Index |
| ROW proxyIPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT proxyIPAction | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT proxyIPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR proxyIPProxyIP | 1.3.6.1.4.1.5003.9.10.3.1.2.1.21.1.5 | SnmpAdminString | read-create | Access: Instant. AC INI-Param: ProxyIp_IpAddress |
| sipProxySetTable | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22 | not-accessible | GwApp Proxy Set Table | |
| sipProxySetEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1 | not-accessible | ||
| U32 sipProxySetIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.1 | Unsigned32 | not-accessible | AC INI-Param: ProxySet_Index |
| ROW sipProxySetRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT sipProxySetAction | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sipProxySetActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sipProxySetEnableProxyKeepAlive | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.5 | INTEGER | read-create | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_EnableProxyKeepAlive |
| U32 sipProxySetProxyKeepAliveTime | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.6 | Unsigned32 | read-create | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyKeepAliveTime |
| INT sipProxySetProxyLoadBalancingMethod | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.7 | INTEGER | read-create | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_ProxyLoadBalancingMethod |
| INT sipProxySetIsProxyHotSwap | 1.3.6.1.4.1.5003.9.10.3.1.2.1.22.1.8 | INTEGER | read-create | GwApp Proxy Set Table. Access: Instant. AC INI-Param: ProxySet_IsProxyHotSwap |
| sipDTMF | 1.3.6.1.4.1.5003.9.10.3.1.2.2 | |||
| INT sipDTMFIsHookFlashUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.2.1 | INTEGER | read-write | Detect and send Hook-Flash as Out-of-Band message. Access: Instant. AC INI-Param: ISHOOKFLASHUSED |
| INT sipDTMFIsDTMFUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.2.2 | INTEGER | read-write | Send DTMFs on the Signaling path (not on the Media path). Access: Instant. AC INI-Param: ISDTMFUSED |
| INT sipDTMFOutOfBandDtmfFormat | 1.3.6.1.4.1.5003.9.10.3.1.2.2.3 | INTEGER | read-write | DTMF Out-of-Band transport method. Access: Instant. AC INI-Param: OUTOFBANDDTMFFORMAT |
| INT sipDTMFDisableAutoMute | 1.3.6.1.4.1.5003.9.10.3.1.2.2.4 | INTEGER | read-write | Disables inband auto mute of DTMFs when signalling is used for sending DTMFs. Access: Instant. AC INI-Param: DISABLEAUTODTMFMUTE |
| INT sipDTMFRxDTMFOption | 1.3.6.1.4.1.5003.9.10.3.1.2.2.5 | INTEGER | read-write | Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: RXDTMFOPTION |
| INT sipDTMFHookFlashOption | 1.3.6.1.4.1.5003.9.10.3.1.2.2.6 | INTEGER | read-write | Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION |
| INT sipDTMFUseDigitForSpecialDTMF | 1.3.6.1.4.1.5003.9.10.3.1.2.2.7 | INTEGER | read-write | Indicates whether a special DTMF, sent with INFO(Cisco), is sent using its digit representation or not. Access: Instant. AC INI-Param: USEDIGITFORSPECIALDTMF |
| U32 sipDTMFMinRoutingOverlapDigits | 1.3.6.1.4.1.5003.9.10.3.1.2.2.8 | Unsigned32 | read-write | Minimum number of overlap digits before routing. Access: Instant. AC INI-Param: MINOVERLAPDIGITSFORROUTING |
| INT sipDTMFISDNOverlapIPtoTelDialing | 1.3.6.1.4.1.5003.9.10.3.1.2.2.9 | INTEGER | read-write | Enable ISDN Overlap IP to Tel Dialing. Access: Instant. AC INI-Param: ISDNTXOVERLAP |
| sipTxDTMFOptionTable | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21 | not-accessible | The names of the five possible coders. | |
| sipTxDTMFOptionEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1 | not-accessible | ||
| U32 sipTxDTMFOptionIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: TxDtmfOption_Index |
| ROW sipTxDTMFOptionRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT sipTxDTMFOptionAction | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sipTxDTMFOptionActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sipTxDTMFOptionValue | 1.3.6.1.4.1.5003.9.10.3.1.2.2.21.1.5 | INTEGER | read-create | Transmit DTMF option. Access: Instant. AC INI-Param: TxDtmfOption_Type |
| sipPorts | 1.3.6.1.4.1.5003.9.10.3.1.2.3 | |||
| U32 sipPortsDestinationPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.1 | Unsigned32 | read-write | Default SIP destination port (usually 5060). Access: Instant. AC INI-Param: SIPDESTINATIONPORT |
| U32 sipPortsLocalSipPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.2 | Unsigned32 | read-write | Local SIP port used for signaling. Access: Instant. AC INI-Param: LOCALSIPPORT |
| U32 sipPortsTCPLocalSipPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.3 | Unsigned32 | read-write | Local SIP port used for signaling. Access: Instant. AC INI-Param: TCPLOCALSIPPORT |
| U32 sipPortsTLSLocalSipPort | 1.3.6.1.4.1.5003.9.10.3.1.2.3.4 | Unsigned32 | read-write | Local TLS SIP port used for signaling. Access: Instant. AC INI-Param: TLSLOCALSIPPORT |
| sipAuth | 1.3.6.1.4.1.5003.9.10.3.1.2.4 | |||
| INT sipAuthMode | 1.3.6.1.4.1.5003.9.10.3.1.2.4.1 | INTEGER | read-write | Authentication mode. Access: Instant. AC INI-Param: AUTHENTICATIONMODE |
| STR sipAuthUserName | 1.3.6.1.4.1.5003.9.10.3.1.2.4.2 | SnmpAdminString | read-write | User Name used for authentication. Access: Instant. AC INI-Param: USERNAME |
| STR sipAuthPassword | 1.3.6.1.4.1.5003.9.10.3.1.2.4.3 | SnmpAdminString | read-write | Password used for authentication. Access: Instant. AC INI-Param: PASSWORD |
| STR sipAuthCnonce | 1.3.6.1.4.1.5003.9.10.3.1.2.4.4 | SnmpAdminString | read-write | Cnonce parameter used for authentication. Access: Instant. AC INI-Param: CNONCE |
| INT sipAuthMutualAuthenticationMode | 1.3.6.1.4.1.5003.9.10.3.1.2.4.5 | INTEGER | read-write | Mutual Authentication Mode: 0 - Optional, 1 - Mandatory. Access: Instant. AC INI-Param: MUTUALAUTHENTICATIONMODE |
| INT sipAuthChallengeCachingMode | 1.3.6.1.4.1.5003.9.10.3.1.2.4.6 | INTEGER | read-write | 0. No caching mode - don't cache any challenges. Every new request will be sent without preliminary authorization. If the request is challenged - new request with authorization data will be sent. 1. Cache for INVITE mode - challenges issued for INVITE request and within the session will be cached. This will prevent the mixture of REGISTER and INVITE authorizations. 2. Full cache mode - cache any challenges from the proxies. . Access: Instant. AC INI-Param: SIPCHALLENGECACHINGMODE |
| authTable | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21 | not-accessible | ||
| authEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1 | not-accessible | ||
| U32 authIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.1 | Unsigned32 | read-only | Entry number, starting at 0. AC INI-Param: Authentication_Index |
| INT authIsUsed | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.2 | INTEGER | read-write | Is this index used. Access: Offline. AC INI-Param: Authentication_IsUsed |
| INT authAction | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT authActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR authUserID | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.5 | SnmpAdminString | read-write | Access: Instant. AC INI-Param: Authentication_UserId |
| STR authUserPassword | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.6 | SnmpAdminString | read-write | Access: Instant. AC INI-Param: Authentication_UserPassword |
| U32 authModule | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.7 | Unsigned32 | read-only | Module. AC INI-Param: Authentication_Module |
| U32 authPort | 1.3.6.1.4.1.5003.9.10.3.1.2.4.21.1.8 | Unsigned32 | read-only | Port. AC INI-Param: Authentication_Port |
| sipRetransmission | 1.3.6.1.4.1.5003.9.10.3.1.2.5 | |||
| U32 sipRetransmissionT1Rtx | 1.3.6.1.4.1.5003.9.10.3.1.2.5.1 | Unsigned32 | read-write | SIP T1 timeout for retransmission. Access: Instant. AC INI-Param: SIPT1RTX |
| U32 sipRetransmissionT2Rtx | 1.3.6.1.4.1.5003.9.10.3.1.2.5.2 | Unsigned32 | read-write | SIP T2 timeout for retransmission. Access: Instant. AC INI-Param: SIPT2RTX |
| U32 sipRetransmissionSipMaxRtx | 1.3.6.1.4.1.5003.9.10.3.1.2.5.3 | Unsigned32 | read-write | Maximum number of retransmissions. Access: Instant. AC INI-Param: SipMaxRtx |
| INT sipRetransmissionIsRtxEnable | 1.3.6.1.4.1.5003.9.10.3.1.2.5.4 | INTEGER | read-write | is Rtx timer enabled. Access: Instant. AC INI-Param: ISRTXENABLE |
| INT sipRetransmissionEnablePTime | 1.3.6.1.4.1.5003.9.10.3.1.2.5.5 | INTEGER | read-write | is ptime parameter needed in sdp. Access: Instant. AC INI-Param: ENABLEPTIME |
| U32 sipRetransmissionTCPTimeout | 1.3.6.1.4.1.5003.9.10.3.1.2.5.6 | Unsigned32 | read-write | SIP TCP time out (influence timerB and Timer F). Access: Instant. AC INI-Param: SIPTCPTIMEOUT |
| U32 sipRetransmissionRetryAfterTime | 1.3.6.1.4.1.5003.9.10.3.1.2.5.7 | Unsigned32 | read-write | Retry After time for the proxy to be in state Unavailable. Access: Instant. AC INI-Param: RETRYAFTERTIME |
| sipRegistration | 1.3.6.1.4.1.5003.9.10.3.1.2.6 | |||
| INT sipRegistrationIsNeeded | 1.3.6.1.4.1.5003.9.10.3.1.2.6.1 | INTEGER | read-write | Is Proxy registration necessary. Access: Instant. AC INI-Param: ISREGISTERNEEDED |
| STR sipRegistrationIP | 1.3.6.1.4.1.5003.9.10.3.1.2.6.2 | SnmpAdminString | read-write | SIP Registrar IP address. Access: Instant. AC INI-Param: REGISTRARIP |
| U32 sipRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.2.6.3 | Unsigned32 | read-write | Time for which registration to Gatekeeper/Proxy is valid. Causes periodic registration (seconds). Access: Instant. AC INI-Param: RegistrationTime |
| U32 sipRegistrationRegistrationRetryTime | 1.3.6.1.4.1.5003.9.10.3.1.2.6.4 | Unsigned32 | read-write | Time in which the gateway will try to register after last registration failure (seconds). Access: Instant. AC INI-Param: REGISTRATIONRETRYTIME |
| STR sipRegistrationRegistrarName | 1.3.6.1.4.1.5003.9.10.3.1.2.6.5 | SnmpAdminString | read-write | SIP Registrar name. Access: Instant. AC INI-Param: REGISTRARNAME |
| U32 sipRegistrationTimeDivider | 1.3.6.1.4.1.5003.9.10.3.1.2.6.6 | Unsigned32 | read-write | Percentage of RegistrationTime when the actual new REGISTER request will be sent out. Access: Instant. AC INI-Param: REGISTRATIONTIMEDIVIDER |
| STR sipRegistrationName | 1.3.6.1.4.1.5003.9.10.3.1.2.6.7 | SnmpAdminString | read-write | Gateway registration name. Access: Instant. AC INI-Param: GWREGISTRATIONNAME |
| INT sipRegistrationRegisterOnInviteFailure | 1.3.6.1.4.1.5003.9.10.3.1.2.6.8 | INTEGER | read-write | Enable ReRegister upon INVITE transaction failure. Access: Instant. AC INI-Param: REGISTERONINVITEFAILURE |
| U32 sipRegistrationTimeThreshold | 1.3.6.1.4.1.5003.9.10.3.1.2.6.9 | Unsigned32 | read-write | If (REGISTRATIONTIMETHRESHOLD > 0) and (REGISTRATIONTIMETHRESHOLD < computed registration time using existing logic) then new registration time will be (Registration time from expires header - REGISTRATIONTIMETHRESHOLD). Access: Instant. AC INI-Param: REGISTRATIONTIMETHRESHOLD |
| INT sipRegistrationRegistrarTransportType | 1.3.6.1.4.1.5003.9.10.3.1.2.6.10 | INTEGER | read-write | Registrar transport type. Access: Instant. AC INI-Param: REGISTRARTRANSPORTTYPE |
| INT sipRegistrationReRegisterOnConnectionFailure | 1.3.6.1.4.1.5003.9.10.3.1.2.6.11 | INTEGER | read-write | Enables GW to perform Re-Registeration on TCP/TLS connection failure. Access: Instant. AC INI-Param: REREGISTERONCONNECTIONFAILURE |
| sipMisc | 1.3.6.1.4.1.5003.9.10.3.1.2.7 | |||
| INT sipMiscEnableEarlyMedia | 1.3.6.1.4.1.5003.9.10.3.1.2.7.1 | INTEGER | read-write | Enable Early Media. Access: Instant. AC INI-Param: ENABLEEARLYMEDIA |
| U32 sipMiscSipSessionExpires | 1.3.6.1.4.1.5003.9.10.3.1.2.7.2 | Unsigned32 | read-write | The SIP session will be refreshed (using INVITE) each time this timer expires (seconds). Access: Instant. AC INI-Param: SIPSESSIONEXPIRES |
| INT sipMiscIsUserPhone | 1.3.6.1.4.1.5003.9.10.3.1.2.7.3 | INTEGER | read-write | Add User=Phone parameter to SIP URL. Access: Instant. AC INI-Param: ISUSERPHONE |
| STR sipMiscGatewayName | 1.3.6.1.4.1.5003.9.10.3.1.2.7.4 | SnmpAdminString | read-write | Gateway name. Access: Instant. AC INI-Param: SIPGATEWAYNAME |
| INT sipMiscPrackMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.5 | INTEGER | read-write | PRACK mechanism mode for 1XX reliable responses: 0- Disabled , 1- Supported , 2- Required. Access: Instant. AC INI-Param: PrackMode |
| INT sipMiscEnableRpiHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.6 | INTEGER | read-write | Enable Remote-Party-ID header. Access: Instant. AC INI-Param: ENABLERPIHEADER |
| INT sipMiscXChannelHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.7 | INTEGER | read-write | 0 (default): No special header 1:Add special header for trunk and B-Channel. Access: Instant. AC INI-Param: XCHANNELHEADER |
| INT sipMiscAssertedIDMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.8 | INTEGER | read-write | Select Asserted Identity header method. Access: Instant. AC INI-Param: ASSERTEDIDMODE |
| INT sipMiscIsUserPhoneInFrom | 1.3.6.1.4.1.5003.9.10.3.1.2.7.9 | INTEGER | read-write | Add 'User=Phone' to From header. Access: Instant. AC INI-Param: ISUSERPHONEINFROM |
| INT sipMiscAddTon2Rpi | 1.3.6.1.4.1.5003.9.10.3.1.2.7.10 | INTEGER | read-write | Add Number Type and Plan to Remote-Party-ID header. Access: Instant. AC INI-Param: ADDTON2RPI |
| INT sipMiscEnableCIC | 1.3.6.1.4.1.5003.9.10.3.1.2.7.11 | INTEGER | read-write | Enables CIC -> ISDN TNS IE interworking. Access: Instant. AC INI-Param: ENABLECIC |
| INT sipMiscTransportType | 1.3.6.1.4.1.5003.9.10.3.1.2.7.12 | INTEGER | read-write | SIP transport type. Access: Instant. AC INI-Param: SIPTRANSPORTTYPE |
| U32 sipMiscISubNumberOfDigits | 1.3.6.1.4.1.5003.9.10.3.1.2.7.13 | Unsigned32 | read-write | Number of digits that will be taken from end of phone number as Subaddress. Access: Instant. AC INI-Param: ISUBNUMBEROFDIGITS |
| INT sipMiscSIP183Behaviour | 1.3.6.1.4.1.5003.9.10.3.1.2.7.14 | INTEGER | read-write | If this parameter set to 1, ALERT to ISDN will be sent upon 183 receive. Access: Instant. AC INI-Param: SIP183BEHAVIOUR |
| INT sipMiscUseToHeaderAsCalledNum | 1.3.6.1.4.1.5003.9.10.3.1.2.7.15 | INTEGER | read-write | Use the user part of To header URL as called number (IP->TEL). Access: Instant. AC INI-Param: ISUSETOHEADERASCALLEDNUMBER |
| INT sipMiscEnableSIPS | 1.3.6.1.4.1.5003.9.10.3.1.2.7.16 | INTEGER | read-write | Enable SIP secured URI usage. Access: Instant. AC INI-Param: ENABLESIPS |
| INT sipMiscEnableSRVQuery | 1.3.6.1.4.1.5003.9.10.3.1.2.7.17 | INTEGER | read-write | Enable DNS SRV queries. Access: Instant. AC INI-Param: ENABLESRVQUERY |
| STR sipMiscSubject | 1.3.6.1.4.1.5003.9.10.3.1.2.7.18 | SnmpAdminString | read-write | User-defined sip subject. Access: Instant. AC INI-Param: SIPSUBJECT |
| INT sipMiscUseSIPTgrp | 1.3.6.1.4.1.5003.9.10.3.1.2.7.19 | INTEGER | read-write | Use TGRP parameter 0 - disable [Default] , 1 - send only , 2 - send and use if in the RequestURI when receiving INVITE, 3 - Nortel Hotline. Access: Instant. AC INI-Param: USESIPTGRP |
| INT sipMiscSend180ForCallWaiting | 1.3.6.1.4.1.5003.9.10.3.1.2.7.20 | INTEGER | read-write | Send 180 for call waiting. Used for parties that do not support 182. Access: Instant. AC INI-Param: SEND180FORCALLWAITING |
| STR sipMiscUserAgentDisplayInfo | 1.3.6.1.4.1.5003.9.10.3.1.2.7.21 | SnmpAdminString | read-write | String that will be displayed in the SIP Header 'User-Agent' or 'Server'. Access: Instant. AC INI-Param: USERAGENTDISPLAYINFO |
| INT sipMiscSessionExpiresMethod | 1.3.6.1.4.1.5003.9.10.3.1.2.7.22 | INTEGER | read-write | Determines the Method which the SIP session will be using to referesh the session. Access: Instant. AC INI-Param: SESSIONEXPIRESMETHOD |
| INT sipMiscEnableGRUU | 1.3.6.1.4.1.5003.9.10.3.1.2.7.23 | INTEGER | read-write | Obtain and use GRUU (Global Routable UserAgentURIs). Access: Instant. AC INI-Param: ENABLEGRUU |
| INT sipMiscDNSQueryType | 1.3.6.1.4.1.5003.9.10.3.1.2.7.24 | INTEGER | read-write | DNS Query Type: 0-ARecord, 1-SRV, 2-NAPTR . Has effect on every DNS query in the system. Access: Instant. AC INI-Param: DNSQUERYTYPE |
| INT sipMiscEnableHistoryInfo | 1.3.6.1.4.1.5003.9.10.3.1.2.7.25 | INTEGER | read-write | Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEHISTORYINFO |
| INT sipMiscEnableTCPConnectionReuse | 1.3.6.1.4.1.5003.9.10.3.1.2.7.26 | INTEGER | read-write | Enable reuse of TCP connection. Access: Instant. AC INI-Param: ENABLETCPCONNECTIONREUSE |
| INT sipMiscComfortNoiseNegotiation | 1.3.6.1.4.1.5003.9.10.3.1.2.7.27 | INTEGER | read-write | is CN payload type is used and being negotiate. Access: Instant. AC INI-Param: COMFORTNOISENEGOTIATION |
| INT sipMiscMultiPtimeFormat | 1.3.6.1.4.1.5003.9.10.3.1.2.7.28 | INTEGER | read-write | Format of multiple ptime (ptime per coder) in outgoing SDP. Access: Instant. AC INI-Param: MULTIPTIMEFORMAT |
| INT sipMiscRTPOnlyMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.29 | INTEGER | read-write | On RTP only mode their is no signalling protocol (for media parameters negotiation with the remote side). The channel is open immediately. The IP for the media is taken from the routing table. The RTP ports are corresponding to the local side ports. RTP-Only mode Values: 0 - regular call establishment 1 - No Signalling. The RTP channel open for Rx & Tx 2- No Signalling. The RTP channel open only for Tx 3 - No Signalling. The RTP channel open only for Rx. Access: Instant. AC INI-Param: RTPONLYMODE |
| INT sipMiscEnableReasonHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.30 | INTEGER | read-write | Enable Reason header in the outgoing messages. Access: Instant. AC INI-Param: ENABLEREASONHEADER |
| INT sipMisc3xxBehavior | 1.3.6.1.4.1.5003.9.10.3.1.2.7.31 | INTEGER | read-write | 3xx response behavior: Forwarding behavior - use different call identifiers Redirect behavior - use the same call identifiers: From, To & CallID. Access: Instant. AC INI-Param: 3XXBEHAVIOR |
| INT sipMiscEnableSemiAttendedTransfer | 1.3.6.1.4.1.5003.9.10.3.1.2.7.32 | INTEGER | read-write | Semi-Attended Transfer when the session to the Target is not established. false - Use REFER with Replaces. true - Use CANCEL and REFER without Replaces if session is not established. Access: Instant. AC INI-Param: ENABLESEMIATTENDEDTRANSFER |
| INT sipMiscUseSIPURIForDiversionHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.33 | INTEGER | read-write | Use Tel uri or Sip uri for Diversion header. Access: Instant. AC INI-Param: UseSIPURIForDiversionHeader |
| INT sipMiscEnableVMURI | 1.3.6.1.4.1.5003.9.10.3.1.2.7.34 | INTEGER | read-write | Enable History-Info header support. Access: Instant. AC INI-Param: ENABLEVMURI |
| INT sipMiscEnablePChargingVector | 1.3.6.1.4.1.5003.9.10.3.1.2.7.35 | INTEGER | read-write | Generate P-Charging-Vector header [0] - disabled [1] - enabled. Access: Instant. AC INI-Param: ENABLEPCHARGINGVECTOR |
| STR sipMiscPAssertedUserName | 1.3.6.1.4.1.5003.9.10.3.1.2.7.36 | SnmpAdminString | read-write | Digit pattern used to indicate Call Forward on Do Not Disturb (PBX to VoiceMail). Access: Instant. AC INI-Param: PASSERTEDUSERNAME |
| STR sipMiscSDPSessionOwner | 1.3.6.1.4.1.5003.9.10.3.1.2.7.37 | SnmpAdminString | read-write | The SDP owner string. Access: Instant. AC INI-Param: SIPSDPSESSIONOWNER |
| INT sipMiscResetOnINIFileDownload | 1.3.6.1.4.1.5003.9.10.3.1.2.7.38 | INTEGER | read-write | Determine if Reset after INI File Download is execute. Access: Instant. AC INI-Param: ResetOnINIFileDownload |
| U32 sipMiscSetDefaultOnIniFileProcess | 1.3.6.1.4.1.5003.9.10.3.1.2.7.39 | Unsigned32 | read-write | Determine if all parameters are set to their defaults before processing updated INI File. Access: Instant. AC INI-Param: SetDefaultOnIniFileProcess |
| INT sipMiscEnableContactRestriction | 1.3.6.1.4.1.5003.9.10.3.1.2.7.40 | INTEGER | read-write | Hides the user part of the URI in the Contact Header 0 - Disable 1 - Enable. Access: Instant. AC INI-Param: ENABLECONTACTRESTRICTION |
| INT sipMiscEnablePAssociatedURIHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.41 | INTEGER | read-write | Handles the P-Associated-URI header in a 200OK response for a REGISTER request. Access: Instant. AC INI-Param: ENABLEPASSOCIATEDURIHEADER |
| U32 sipMiscMinSE | 1.3.6.1.4.1.5003.9.10.3.1.2.7.42 | Unsigned32 | read-write | Minimal value for session refresh. Access: Instant. AC INI-Param: MINSE |
| U32 sipMiscApplicationProfile | 1.3.6.1.4.1.5003.9.10.3.1.2.7.43 | Unsigned32 | read-write | ApplicationProfile, read it later for validating that the board is theirs. Access: Offline. AC INI-Param: APPLICATIONPROFILE |
| STR sipMiscOPTIONSUserPart | 1.3.6.1.4.1.5003.9.10.3.1.2.7.44 | SnmpAdminString | read-write | Allow to configure the OPTIONS userpart string for all gateways. The default value should be empty string which means that we don't use this parameter. Another special value is 'empty' which means that the we don't populate the user part of the OPTIONS request URI. Any other value will be taken as is and used as the user part of the OPTIONS request URI. Access: Instant. AC INI-Param: OPTIONSUSERPART |
| INT sipMiscUseAORInReferToHeader | 1.3.6.1.4.1.5003.9.10.3.1.2.7.45 | INTEGER | read-write | If enabled, we will use URI from To/From headers in Refer-To header. If disabled, we will take the URI from Contact. Access: Instant. AC INI-Param: USEAORINREFERTOHEADER |
| INT sipMiscForkingHandlingMode | 1.3.6.1.4.1.5003.9.10.3.1.2.7.46 | INTEGER | read-write | Decides the handling method to 18X response to forking 0 - Parallel handling - only the first 18X response is handled 1 - Sequential handling - all the 18X responses are handled. Access: Instant. AC INI-Param: FORKINGHANDLINGMODE |
| INT sipMiscOfferUnencryptedSRTCP | 1.3.6.1.4.1.5003.9.10.3.1.2.7.47 | INTEGER | read-write | If set to 1, the 'crypto' attribute includes the UNENCRYPTED_SRTCP parameter. If set to 1, the UNENCRYPTED_SRTCP parameter is not included. Access: Instant. AC INI-Param: OFFERUNENCRYPTEDSRTCP |
| STR sipMiscSourceNumberPreference | 1.3.6.1.4.1.5003.9.10.3.1.2.7.48 | SnmpAdminString | read-write | Determines from where the source number shall be taken from (in an incoming INVITE request). Parameter values: - NULL: no changes in current logic - FROM: source number is taken from 'FROM' field. Access: Instant. AC INI-Param: SOURCENUMBERPREFERENCE |
| sipSubscribe | 1.3.6.1.4.1.5003.9.10.3.1.2.8 | |||
| INT sipSubscribeEnable | 1.3.6.1.4.1.5003.9.10.3.1.2.8.1 | INTEGER | read-write | This parameter related to Subscribe/UnSubscribe buttons. Access: Instant. AC INI-Param: SHOULDSUBSCRIBE |
| U32 sipSubscribeRetryTime | 1.3.6.1.4.1.5003.9.10.3.1.2.8.2 | Unsigned32 | read-write | MWI service subscription retry time after last subscription failure (seconds). Access: Instant. AC INI-Param: SUBSCRIBERETRYTIME |
| INT sipSubscribeEnableMWISubscription | 1.3.6.1.4.1.5003.9.10.3.1.2.8.3 | INTEGER | read-write | Enable subscription for Message Waiting Indicator service. Access: Instant. AC INI-Param: ENABLEMWISUBSCRIPTION |
| INT sipSubscribeSubscriptionMode | 1.3.6.1.4.1.5003.9.10.3.1.2.8.4 | INTEGER | read-write | Subscription Mode: 0 - Per Endpoint, 1 - Per Gateway. Access: Instant. AC INI-Param: SUBSCRIPTIONMODE |
| sipDigitalGW | 1.3.6.1.4.1.5003.9.10.3.1.2.9 | |||
| causeMapSIP2ISDNTable | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21 | not-accessible | Cause Map SIP to ISDN Table. | |
| causeMapSIP2ISDNEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1 | not-accessible | ||
| U32 causeMapSIP2ISDNIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.1 | Unsigned32 | not-accessible | AC INI-Param: CauseMapSip2Isdn_Index |
| ROW causeMapSIP2ISDNRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT causeMapSIP2ISDNAction | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT causeMapSIP2ISDNActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| I32 causeMapSIP2ISDNSIPResponse | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.5 | Integer32 | read-write | Access: Instant. AC INI-Param: CauseMapSip2Isdn_SipResponse |
| I32 causeMapSIP2ISDNQ850Cause | 1.3.6.1.4.1.5003.9.10.3.1.2.9.21.1.6 | Integer32 | read-write | Access: Instant. AC INI-Param: CauseMapSip2Isdn_IsdnReleaseCause |
| causeMapISDN2SIPTable | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22 | not-accessible | Cause Map SIP to ISDN Table. | |
| causeMapISDN2SIPEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1 | not-accessible | ||
| U32 causeMapISDN2SIPIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.1 | Unsigned32 | not-accessible | AC INI-Param: CauseMapIsdn2Sip_Index |
| ROW causeMapISDN2SIPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. Access: Instant. AC INI-Param: N/A |
| INT causeMapISDN2SIPAction | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT causeMapISDN2SIPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| I32 causeMapISDN2SIPQ850Cause | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.5 | Integer32 | read-write | Access: Instant. AC INI-Param: CauseMapIsdn2Sip_IsdnReleaseCause |
| I32 causeMapISDN2SIPSIPResponse | 1.3.6.1.4.1.5003.9.10.3.1.2.9.22.1.6 | Integer32 | read-write | Access: Instant. AC INI-Param: CauseMapIsdn2Sip_SipResponse |
| sipSAS | 1.3.6.1.4.1.5003.9.10.3.1.2.10 | |||
| INT sipSASEnable | 1.3.6.1.4.1.5003.9.10.3.1.2.10.1 | INTEGER | read-write | Enables SAS functionality. Access: Offline. AC INI-Param: ENABLESAS |
| U32 sipSASLocalSIPUdpPort | 1.3.6.1.4.1.5003.9.10.3.1.2.10.2 | Unsigned32 | read-write | Local SAS SIP port used for signaling over UDP. Access: Instant. AC INI-Param: SASLOCALSIPUDPPORT |
| STR sipSASDefaultGatewayIP | 1.3.6.1.4.1.5003.9.10.3.1.2.10.3 | SnmpAdminString | read-write | SIP SAS default IP address for incoming requests in emergency mode. Access: Instant. AC INI-Param: SASDEFAULTGATEWAYIP |
| U32 sipSASLocalSIPTlsPort | 1.3.6.1.4.1.5003.9.10.3.1.2.10.4 | Unsigned32 | read-write | Local SAS SIP port used for signaling over TLS. Access: Instant. AC INI-Param: SASLOCALSIPTLSPORT |
| U32 sipSASRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.2.10.5 | Unsigned32 | read-write | SAS will send this value in expires header while working in emergency mode. Access: Instant. AC INI-Param: SASREGISTRATIONTIME |
| U32 sipSASShortNumberLength | 1.3.6.1.4.1.5003.9.10.3.1.2.10.6 | Unsigned32 | read-write | Upon incoming request the user info in the request is compared to the registered one. SAS performs comparison of the arrived user info with the suffix of the registered one. The length of the suffix is determined by this parameter. Access: Instant. AC INI-Param: SASSHORTNUMBERLENGTH |
| U32 sipSASLocalSIPTcpPort | 1.3.6.1.4.1.5003.9.10.3.1.2.10.7 | Unsigned32 | read-write | Local SAS SIP port used for signaling over TCP. Access: Instant. AC INI-Param: SASLOCALSIPTCPPORT |
| U32 sipSASProxySet | 1.3.6.1.4.1.5003.9.10.3.1.2.10.8 | Unsigned32 | read-write | Proxy Set Id for SAS. Access: Instant. AC INI-Param: SASPROXYSET |
| I32 sipSASRedundantProxySet | 1.3.6.1.4.1.5003.9.10.3.1.2.10.9 | Integer32 | read-write | Proxy Set Id for Redundant SAS. Access: Instant. AC INI-Param: REDUNDANTSASPROXYSET |
| INT sipSASBindingMode | 1.3.6.1.4.1.5003.9.10.3.1.2.10.10 | INTEGER | read-write | Defines the SAS database binding mode: 0 - URI dependant 1 - according to user part. Access: Instant. AC INI-Param: SASBINDINGMODE |
| INT sipSASSurvivabilityMode | 1.3.6.1.4.1.5003.9.10.3.1.2.10.11 | INTEGER | read-write | Defines the SAS working mode: 0 - Standard Mode (working with configured proxy set) 1 - Always emergency mode (working without proxy) 2 - Ignore REGISTER in normal mode. Access: Instant. AC INI-Param: SASSURVIVABILITYMODE |
| INT sipSASEnableENUM | 1.3.6.1.4.1.5003.9.10.3.1.2.10.12 | INTEGER | read-write | Enables SAS to perform ENUM query when receiving INVITE messages in emergency mode. Access: Instant. AC INI-Param: SASENABLEENUM |
| INT sipSASEnableRecordRoute | 1.3.6.1.4.1.5003.9.10.3.1.2.10.13 | INTEGER | read-write | Enables SAS to add record-Route header to requests. Access: Instant. AC INI-Param: SASENABLERECORDROUTE |
| sasRegistrationManipulationTable | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21 | not-accessible | GWAPP SAS Registration Manipulation Table. | |
| sasRegistrationManipulationEntry | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1 | not-accessible | ||
| U32 sasRegistrationManipulationIndex | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.1 | Unsigned32 | not-accessible | AC INI-Param: SASRegistrationManipulation_Index |
| ROW sasRegistrationManipulationRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.2 | RowStatus | read-create | Row-Status Textual Conventions as defined in RFC 2579: Textual Conventions for SMIv2. AC INI-Param: N/A |
| INT sasRegistrationManipulationAction | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT sasRegistrationManipulationActionResult | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| U32 sasRegistrationManipulationRemoveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.5 | Unsigned32 | read-create | Access: Instant. AC INI-Param: SASRegistrationManipulation_RemoveFromRight |
| U32 sasRegistrationManipulationLeaveFromRight | 1.3.6.1.4.1.5003.9.10.3.1.2.10.21.1.6 | Unsigned32 | read-create | Access: Instant. AC INI-Param: SASRegistrationManipulation_LeaveFromRight |
| h323 | 1.3.6.1.4.1.5003.9.10.3.1.3 | |||
| INT h323SourceEncodType | 1.3.6.1.4.1.5003.9.10.3.1.3.1 | INTEGER | read-write | Calling number coding type in Setup message. Access: Instant. AC INI-Param: SOURCEENCODTYPE |
| INT h323DestEncodType | 1.3.6.1.4.1.5003.9.10.3.1.3.2 | INTEGER | read-write | Called number coding type in Setup message. Access: Instant. AC INI-Param: DESTENCODTYPE |
| STR h323H323IDString | 1.3.6.1.4.1.5003.9.10.3.1.3.3 | SnmpAdminString | read-write | Definition of Gateway H.323-ID source field. Access: Instant. AC INI-Param: H323IDSTRING |
| h323ConnectionModes | 1.3.6.1.4.1.5003.9.10.3.1.3.10 | |||
| INT h323ConnectionModesIsTunnelingUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.10.1 | INTEGER | read-write | Use H.323 Tunneling call setup procedure. Access: Instant. AC INI-Param: ISTUNNELINGUSED |
| fastStart | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5 | |||
| INT fastStartIsFastConnectUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.1 | INTEGER | read-write | Use H.323 Fast Start call setup procedure. Access: Instant. AC INI-Param: ISFASTCONNECTUSED |
| U32 fastStartOpenH245OnFS | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.2 | Unsigned32 | read-write | Open H.245 when using Fast Start call setup procedure. Access: Instant. AC INI-Param: OPENH245ONFS |
| INT fastStartIsFSMediaInfoSendOnConnect | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.3 | INTEGER | read-write | Is Fast start Media sent in in Connect or in Alert. Access: Instant. AC INI-Param: ISFSMEDIAINFOSENDONCONNECT |
| INT fastStartIsFSOpenMediaOnConnect | 1.3.6.1.4.1.5003.9.10.3.1.3.10.5.4 | INTEGER | read-write | Open voice channel afer sending Connect or after sending Alert. Access: Instant. AC INI-Param: ISFSOPENMEDIAONCONNECT |
| h323GK | 1.3.6.1.4.1.5003.9.10.3.1.3.11 | |||
| INT h323GKIsGateKeeperUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.1 | INTEGER | read-write | Is gateway using a H.323 Gatekeeper. Access: Offline. AC INI-Param: ISGATEKEEPERUSED |
| INT h323GKGwRegistrType | 1.3.6.1.4.1.5003.9.10.3.1.3.11.2 | INTEGER | read-write | Type of Gatekeeper registration. Access: Instant. AC INI-Param: GWREGISTRTYPE |
| INT h323GKIsGkFallbackUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.3 | INTEGER | read-write | Allow fallback to internal Tel to IP routing table if Gatekeeper/Proxy is not responding. Access: Offline. AC INI-Param: ISFALLBACKUSED |
| INT h323GKCanMapAliases | 1.3.6.1.4.1.5003.9.10.3.1.3.11.4 | INTEGER | read-write | If enabled, Gatekeeper can change gateway destination number using the Alias parameter in ACF message. Access: Instant. AC INI-Param: CANMAPALIASES |
| U32 h323GKResponseTimeout | 1.3.6.1.4.1.5003.9.10.3.1.3.11.5 | Unsigned32 | read-write | Time in which the gateway waits for a RAS response from the Gatekeeper before retransmission (seconds). Access: Instant. AC INI-Param: RESPONSETIMEOUT |
| U32 h323GKMaxRetries | 1.3.6.1.4.1.5003.9.10.3.1.3.11.6 | Unsigned32 | read-write | Maximum number of retransmissions of RAS messages to Gatekeeper. Access: Instant. AC INI-Param: MAXRETRIES |
| U32 h323GKRegistrationTime | 1.3.6.1.4.1.5003.9.10.3.1.3.11.7 | Unsigned32 | read-write | Time in seconds for which registration to Gatekeeper/Proxy is valid. cause periodic registration. Access: Offline. AC INI-Param: REGISTRATIONTIME |
| INT h323GKIsTerminal | 1.3.6.1.4.1.5003.9.10.3.1.3.11.8 | INTEGER | read-write | The gateway registers as a H.323 terminal with multiple aliases. Otherwise, the gateway behaves as an H.323 gateway. Access: Instant. AC INI-Param: ISTERMINAL |
| STR h323GKGatekeeperID | 1.3.6.1.4.1.5003.9.10.3.1.3.11.9 | SnmpAdminString | read-write | Gatekeeper Identification name, to be used in Registration Request (RRQ) messages. Access: Instant. AC INI-Param: GATEKEEPERID |
| INT h323GKEnablePregrantARQ | 1.3.6.1.4.1.5003.9.10.3.1.3.11.10 | INTEGER | read-write | ARQ message won't be sent if the Gatekeeper has pre-granted admission. Access: Instant. AC INI-Param: ENABLEPREGRANTARQ |
| INT h323GKRegister | 1.3.6.1.4.1.5003.9.10.3.1.3.11.11 | INTEGER | read-write | This parameter related to Register/UnRegister buttons. Access: Instant. AC INI-Param: SHOULDREGISTER |
| INT h323GKAlternativeGKUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.12 | INTEGER | read-write | Allows working with Alternative GK that should be provided by GK. Access: Offline. AC INI-Param: ALTERNATIVEGKUSED |
| INT h323GKUseRedundantGKOnRRJ | 1.3.6.1.4.1.5003.9.10.3.1.3.11.13 | INTEGER | read-write | Useredundant Gatekeeper on receiving RRJ message. Access: Offline. AC INI-Param: USEREDUNDANTGKONRRJ |
| INT h323GKEnableGKAutoDiscovery | 1.3.6.1.4.1.5003.9.10.3.1.3.11.14 | INTEGER | read-write | Enables GK automatic discovery mechanism. Access: Offline. AC INI-Param: ENABLEGKAUTODISCOVERY |
| IP h323GKGKAutoDiscoveryIP | 1.3.6.1.4.1.5003.9.10.3.1.3.11.15 | IpAddress | read-write | Multicast IP Address for GK automatic discovery. Access: Offline. AC INI-Param: GKAUTODISCOVERYIP |
| gkIPTable | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21 | not-accessible | ||
| gkIPEntry | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1 | not-accessible | ||
| U32 gkIPIndex | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: GateKeeperIp_Index |
| ROW gkIPRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.2 | RowStatus | read-create | This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A |
| INT gkIPAction | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT gkIPActionResult | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR gkIPGatekeeperIP | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.5 | SnmpAdminString | read-create | IP of GK. Access: Offline. AC INI-Param: GateKeeperIp_IpAddress |
| STR gkIPGateleeperID | 1.3.6.1.4.1.5003.9.10.3.1.3.11.21.1.6 | SnmpAdminString | read-create | ID of GK. Access: Offline. AC INI-Param: GateKeeperIp_Id |
| registerPrefixTable | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22 | not-accessible | The registration prefixes are applicable for Digital E1/T1 and FXO gateways for registration to Gatekeeper. If not used the gateway will register with its endpoint phone numbers. | |
| registerPrefixEntry | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1 | not-accessible | ||
| U32 registerPrefixIndex | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: RegistrationPrefix_Index |
| ROW registerPrefixRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.2 | RowStatus | read-create | This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A |
| INT registerPrefixAction | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT registerPrefixActionResult | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| STR registerPrefixPrefix | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.5 | SnmpAdminString | read-create | Usually the prefixes will define range of PSTN/PBX phone numbers that the gateway can handle. Access: Offline. AC INI-Param: RegistrationPrefix_Prefix |
| INT registerPrefixNumberPlan | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.6 | INTEGER | read-create | Number Plan that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberPlan |
| INT registerPrefixNumberType | 1.3.6.1.4.1.5003.9.10.3.1.3.11.22.1.7 | INTEGER | read-create | Number Type that will be used when Registration Type is PartyNumber. Access: Instant. AC INI-Param: RegistrationPrefix_NumberType |
| gkRedundancy | 1.3.6.1.4.1.5003.9.10.3.1.3.11.30 | |||
| INT gkRedundancyUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.11.30.1 | INTEGER | read-write | Allow Gatekeeper redundancy. At least one redundant Gatekeeper should be defined. Access: Instant. AC INI-Param: ISREDUNDANTGKUSED |
| U32 gkRedundancyTimeBetweenGKsLoops | 1.3.6.1.4.1.5003.9.10.3.1.3.11.30.2 | Unsigned32 | read-write | Time between the gateway retries to connect to Gatekeeper if connection was lost (seconds). Access: Instant. AC INI-Param: TIMEBETWEENGKSLOOPS |
| gkRAI | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31 | |||
| INT gkRAIEnable | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.1 | INTEGER | read-write | Enable sending of H.323 Resource Avaialable Indication message to Gatekeeper due to overload. Access: Instant. AC INI-Param: ENABLERAI |
| U32 gkRAIHighThreshold | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.2 | Unsigned32 | read-write | Percentage of active calls in order to send 'Almost out of resources' RAI. Access: Instant. AC INI-Param: RAIHIGHTHRESHOLD |
| U32 gkRAILowThreshold | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.3 | Unsigned32 | read-write | percentage of active calls to send 'Resources OK' RAI. Access: Instant. AC INI-Param: RAILOWTHRESHOLD |
| U32 gkRAILoopTime | 1.3.6.1.4.1.5003.9.10.3.1.3.11.31.4 | Unsigned32 | read-write | Time period to check call resources (seconds). Access: Instant. AC INI-Param: RAILOOPTIME |
| h323DTMF | 1.3.6.1.4.1.5003.9.10.3.1.3.12 | |||
| INT h323DTMFHookFlashOption | 1.3.6.1.4.1.5003.9.10.3.1.3.12.1 | INTEGER | read-write | Detect and send Hook-Flash using the selected method. Access: Instant. AC INI-Param: HOOKFLASHOPTION |
| INT h323DTMFRxDtmfOption | 1.3.6.1.4.1.5003.9.10.3.1.3.12.2 | INTEGER | read-write | Declare support for RFC 2833 in SDP. Access: Instant. AC INI-Param: ISFALLBACKUSED |
| dTMFOptionsTable | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21 | not-accessible | The names of the five possible coders. | |
| dTMFOptionsEntry | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1 | not-accessible | ||
| U32 dTMFOptionsIndex | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.1 | Unsigned32 | not-accessible | Entry number, starting at 0. AC INI-Param: N/A |
| ROW dTMFOptionsRowStatus | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.2 | RowStatus | read-create | This object allows entries to be created and deleted from the table. For Reference: RFC 1903, Textual Conventions for Version 2 of the Simple Network Management Protocol (SNMPv2). Access: Instant. AC INI-Param: N/A |
| INT dTMFOptionsAction | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.3 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT dTMFOptionsActionResult | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.4 | INTEGER | read-only | Development Impending. AC INI-Param: N/A |
| INT dTMFOptionsTxDTMFOption | 1.3.6.1.4.1.5003.9.10.3.1.3.12.21.1.5 | INTEGER | read-create | Transmit DTMF option. Access: Instant. AC INI-Param: N/A |
| h323Ports | 1.3.6.1.4.1.5003.9.10.3.1.3.13 | |||
| U32 h323PortsH225ListenPort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.1 | Unsigned32 | read-write | Port on which the gateway expects to receive H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225LISTENPORT |
| U32 h323PortsH225DialPort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.2 | Unsigned32 | read-write | Port on which the gateway sends H.225 Setup messages. (Usually 1720). Access: Offline. AC INI-Param: H225DIALPORT |
| U32 h323PortsH323BasePort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.3 | Unsigned32 | read-write | Defines range for gateway H.225/H.245 local port messages. Access: Offline. AC INI-Param: H323BASEPORT |
| U32 h323PortsRasSourcePort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.4 | Unsigned32 | read-write | RAS requests source port. Access: Instant. AC INI-Param: RASSOURCEPORT |
| U32 h323PortsRasDestPort | 1.3.6.1.4.1.5003.9.10.3.1.3.13.5 | Unsigned32 | read-write | RAS requests destination port. Access: Instant. AC INI-Param: RASDESTPORT |
| h323Auth | 1.3.6.1.4.1.5003.9.10.3.1.3.14 | |||
| INT h323AuthEnableH235Security | 1.3.6.1.4.1.5003.9.10.3.1.3.14.1 | INTEGER | read-write | Enable H.235 security. Access: Offline. AC INI-Param: ENABLEH235SECURITY |
| STR h323AuthUserName | 1.3.6.1.4.1.5003.9.10.3.1.3.14.2 | SnmpAdminString | read-write | User Name used for authentication. Access: Instant. AC INI-Param: USERNAME |
| STR h323AuthPassword | 1.3.6.1.4.1.5003.9.10.3.1.3.14.3 | SnmpAdminString | read-write | Password used for authentication. Access: Instant. AC INI-Param: PASSWORD |
| h323Misc | 1.3.6.1.4.1.5003.9.10.3.1.3.15 | |||
| INT h323MiscIsSetupIncludeNum | 1.3.6.1.4.1.5003.9.10.3.1.3.15.1 | INTEGER | read-write | Setup message contains called party number. Access: Instant. AC INI-Param: ISSETUPINCLUDENUM |
| INT h323MiscIsSetupAckUsed | 1.3.6.1.4.1.5003.9.10.3.1.3.15.2 | INTEGER | read-write | Enable SetupAck messages for overlap mode. Access: Instant. AC INI-Param: ISSETUPACKUSED |
| U32 h323MiscH245InitTimeOut | 1.3.6.1.4.1.5003.9.10.3.1.3.15.3 | Unsigned32 | read-write | h245.channelsTimeout value. Access: Offline. AC INI-Param: H245INITTIMEOUT |
| INT h323MiscEnableQ931Cause | 1.3.6.1.4.1.5003.9.10.3.1.3.15.4 | INTEGER | read-write | H.225 Reason / Q.931 Cause is sent in H.323 Release Complete message. Access: Instant. AC INI-Param: ENABLEQ931CAUSE |
| INT h323MiscEnableQ931Multiplexing | 1.3.6.1.4.1.5003.9.10.3.1.3.15.5 | INTEGER | read-write | Use same socket for all H.225 messages. Access: Instant. AC INI-Param: ENABLEQ931MULTIPLEXING |
| INT h323MiscSendChannelNonStandard | 1.3.6.1.4.1.5003.9.10.3.1.3.15.6 | INTEGER | read-write | Send trunk and bchannel numbers on setup and call proceeding messages as nonStandard data. Access: Instant. AC INI-Param: SENDCHANNELNONSTANDARD |
| U32 h323MiscH245RoundTripTime | 1.3.6.1.4.1.5003.9.10.3.1.3.15.7 | Unsigned32 | read-write | Time between H.245 Round Trip Delay messages (seconds). Access: Instant. AC INI-Param: H245ROUNDTRIPTIME |
| INT h323MiscProgressBehavior | 1.3.6.1.4.1.5003.9.10.3.1.3.15.8 | INTEGER | read-write | Interworking behavior of Progress message (0-Alert, 1-Progress). Access: Instant. AC INI-Param: H323PROGRESSBEHAVIOR |
RFC description
AudioCodes gateway management for channel selection, trunk allocation, and IP-to-Tel voice call configuration.
Start monitoring AudioCodes Mediant-series gateways with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.