AC-LAG-MIB

All MIBs › AC-LAG-MIB

Organization: Appian Communications, Inc.

Last Updated: 2000-02-23

Category: Vendor: AudioCodes

Description: Manages Link Aggregation Group (LAG) configuration on AudioCodes devices, enabling port bonding for increased uplink bandwidth and redundancy.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is AC-LAG-MIB?

AC-LAG-MIB is a vendor MIB from AudioCodes (originally Appian Communications) that manages IEEE 802.3ad Link Aggregation Group configuration, allowing multiple physical ports to be bonded into a single logical uplink for increased bandwidth and redundancy on AudioCodes gateway/media platforms. It exposes an aggregation table describing each LAG's MAC address, actor/partner system IDs and priorities, admin/operational key values, and the ports composing the aggregate. This is used for monitoring both configuration and operational hardware status: an administrator can check whether an aggregate's actor and partner operational keys match (confirming successful LACP negotiation) and detect a port that has dropped out of an aggregate, which signals a link or hardware failure on that member port. It implements the IEEE 802.3ad standard, so it depends on that standard's LACP state machine semantics though it's exposed through a vendor-specific MIB rather than the standard IEEE8023-LAG-MIB. It is deployed on AudioCodes VoIP media gateways that use bonded uplinks for capacity or redundancy. Engineers can download the AC-LAG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in AC-LAG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Appian Communications, Inc. chassis-based access-platform equipment (802.3ad Link Aggregation)

Monitoring Examples

An administrator would walk acDot3adAggTable (acDot3adAggEntry, indexed by acDot3adAggNodeIdIndex and acDot3adAggInstanceIndex) and compare acDot3adAggActorOperKey against acDot3adAggPartnerSystemID/operational key to confirm the aggregate is correctly negotiated with its LACP partner. Monitoring acDot3adAggPort membership over time reveals a member port dropping out of the aggregate, which would reduce available bandwidth and indicate a link or NIC fault.

What Can Be Monitored

LAG aggregate MAC address
actor/partner operational key match
aggregate member ports
actor system priority
aggregate up/individual state

Imported Objects

From APPIAN-SMI-MIB

AcAdminStatus
AcNodeId
AcOpStatus
AcPortNumber
AcSlotNumber
acPport	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
MacAddress
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using acDot3adAggPortStatsLACPDUsRx OID:

Select an Appian Communications access platform as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type acDot3adAggPortStatsLACPDUsRx into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of valid LACPDUs received on this Aggregation Port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
acDot3adAgg	1.3.6.1.4.1.2785.2.3.8.1.1
LAC acDot3adAggActorAdminKey	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.7	LacpKey	read-write	The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance.
LAC acDot3adAggActorOperKey	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.8	LacpKey	read-only	The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
MAC acDot3adAggActorSystemID	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.5	MacAddress	read-only	A 6-octet read-write MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggregation mechanisms described in Clause 43, only a single combination of Actor's System ID and System Priority are considered, and no distinction is made between the values of these parameters for an Aggregator and the port(s) that are associated with it; i.e., the protocol is described in terms of the operation of aggregation within a single System. However, the managed objects provided for the Aggregator and the port both allow management of these parameters. The result of this is to permit a single piece of equipment to be configured by management to contain more than one System from the point of view of the operation of Link Aggregation. This may be of particular use in the configuration of equipment that has limited aggregation capability (see 43.6).
INT acDot3adAggActorSystemPriority	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.4	INTEGER	read-write	A 2-octet read-write value indicating the priority value associated with the Actor's System ID.
T/F acDot3adAggAggregateOrIndividual	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.6	TruthValue	read-only	A read-only Boolean value indicating whether the Aggregator represents an Aggregate (`TRUE') or an Individual link (`FALSE').
INT acDot3adAggCollectorMaxDelay	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.12	INTEGER	read-write	The value of this 16-bit read-write attribute defines the maximum delay, in tens of microseconds, that may be imposed by the Frame Collector between receiving a frame from an Aggregator Parser, and either delivering the frame to its MAC Client or discarding the frame (see 43.2.3.1.1).
acDot3adAggCompliance	1.3.6.1.4.1.2785.2.3.8.2.2.1			The compliance statement for device support of Link Aggregation.
acDot3adAggCompliances	1.3.6.1.4.1.2785.2.3.8.2.2
acDot3adAggConformance	1.3.6.1.4.1.2785.2.3.8.2
acDot3adAggEntry	1.3.6.1.4.1.2785.2.3.8.1.1.1.1		not-accessible	A list of the Aggregator parameters. This is indexed by OSAP node ID - supporting one Aggregator per OSAP.
acDot3adAggGroup	1.3.6.1.4.1.2785.2.3.8.2.1.1			A collection of objects providing information about an aggregation.
acDot3adAggGroups	1.3.6.1.4.1.2785.2.3.8.2.1
ACA acDot3adAggInstanceIndex	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.2	AcAggInstanceIndex	not-accessible	The instance of this aggregator within this OSAP.
MAC acDot3adAggMACAddress	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.3	MacAddress	read-only	A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator.
ACN acDot3adAggNodeIdIndex	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.1	AcNodeId	not-accessible	The node id is the id for this specific node in the OSAP ring.
LAC acDot3adAggPartnerOperKey	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.11	LacpKey	read-only	The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-only value. If the aggregation is manually configured, this Key value will be a value assigned by the local System.
MAC acDot3adAggPartnerSystemID	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.9	MacAddress	read-only	A 6-octet read-only MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that there is no known Partner. If the aggregation is manually configured, this System ID value will be a value assigned by the local System.
INT acDot3adAggPartnerSystemPriority	1.3.6.1.4.1.2785.2.3.8.1.1.1.1.10	INTEGER	read-only	A 2-octet read-only value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System Priority value will be a value assigned by the local System.
acDot3adAggPort	1.3.6.1.4.1.2785.2.3.8.1.2
LAC acDot3adAggPortActorAdminKey	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.6	LacpKey	read-write	The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local significance.
LAC acDot3adAggPortActorAdminState	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.22	LacpState	read-write	A string of 8 bits, corresponding to the administrative values of Actor_State (43.4.2) as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Actor_State (LACP_Activity), the second bit corresponds to bit 1 (LACP_Timeout), the third bit corresponds to bit 2 (Aggregation), the fourth bit corresponds to bit 3 (Synchronization), the fifth bit corresponds to bit 4 (Collecting), the sixth bit corresponds to bit 5 (Distributing), the seventh bit corresponds to bit 6 (Defaulted), and the eighth bit corresponds to bit 7 (Expired). These values allow administrative control over the values of LACP_Activity, LACP_Timeout and Aggregation. This attribute value is read-write.
LAC acDot3adAggPortActorOperKey	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.7	LacpKey	read-write	The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significance.
LAC acDot3adAggPortActorOperState	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.23	LacpState	read-only	A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-only.
INT acDot3adAggPortActorPort	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.16	INTEGER	read-only	The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only.
INT acDot3adAggPortActorPortPriority	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.17	INTEGER	read-write	The priority value assigned to this Aggregation Port. This 16-bit value is read-write.
MAC acDot3adAggPortActorSystemID	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.5	MacAddress	read-only	A 6-octet read-only MAC address value that defines the value of the System ID for the System that contains this Aggregation Port.
INT acDot3adAggPortActorSystemPriority	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.4	INTEGER	read-write	A 2-octet read-write value used to define the priority value associated with the Actor's System ID.
T/F acDot3adAggPortAggregateOrIndividual	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.26	TruthValue	read-only	A read-only Boolean value indicating whether the Aggregation Port is able to Aggregate (`TRUE') or is only able to operate as an Individual link (`FALSE').
ACA acDot3adAggPortAttachedAggID	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.15	AcAggInstanceValue	read-only	The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached to an Aggregator. This value is read-only.
C32 acDot3adAggPortDebugActorChangeCount	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.11	Counter32	read-only	Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only.
C32 acDot3adAggPortDebugActorChurnCount	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.7	Counter32	read-only	Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only.
CHU acDot3adAggPortDebugActorChurnState	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.5	ChurnState	read-only	The state of the Actor Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_ACTOR_CHURN or the ACTOR_CHURN_MONITOR state, and `churn' indicates that the state machine is in the ACTOR_CHURN state. This value is read-only.
C32 acDot3adAggPortDebugActorSyncTransitionCount	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.9	Counter32	read-only	Count of the number of times the Actor's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only.
acDot3adAggPortDebugEntry	1.3.6.1.4.1.2785.2.3.8.1.2.3.1		not-accessible	A list of the debug parameters for a port.
acDot3adAggPortDebugGroup	1.3.6.1.4.1.2785.2.3.8.2.1.5			A collection of objects providing debug information about every aggregated port.
TIK acDot3adAggPortDebugLastRxTime	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.2	TimeTicks	read-only	The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only.
STR acDot3adAggPortDebugMuxReason	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.4	DisplayString	read-only	A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only.
INT acDot3adAggPortDebugMuxState	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.3	INTEGER	read-only	This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state machine is in the WAITING state, `attached' if the Mux state machine for the Aggregation Port is in the ATTACHED state, `collecting' if the Mux state machine for the Aggregation Port is in the COLLECTING state, `distributing' if the Mux state machine for the Aggregation Port is in the DISTRIBUTING state, and `collectingDistributing' if the Mux state machine for the Aggregation Port is in the COLLECTING_DISTRIBUTING state. This value is read-only.
C32 acDot3adAggPortDebugPartnerChangeCount	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.12	Counter32	read-only	Count of the number of times the Partner's perception of the LAG ID (see 43.3.6.1) for this Aggregation Port has changed. This value is read-only.
C32 acDot3adAggPortDebugPartnerChurnCount	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.8	Counter32	read-only	Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only.
CHU acDot3adAggPortDebugPartnerChurnState	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.6	ChurnState	read-only	The state of the Partner Churn Detection machine (43.4.17) for the Aggregation Port. A value of `noChurn' indicates that the state machine is in either the NO_PARTNER_CHURN or the PARTNER_CHURN_MONITOR state, and `churn' indicates that the state machine is in the PARTNER_CHURN state. This value is read-only.
C32 acDot3adAggPortDebugPartnerSyncTransitionCount	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.10	Counter32	read-only	Count of the number of times the Partner's Mux state machine (43.4.15) has entered the IN_SYNC state. This value is read-only.
INT acDot3adAggPortDebugRxState	1.3.6.1.4.1.2785.2.3.8.1.2.3.1.1	INTEGER	read-only	This attribute holds the value `currentRx' if the Receive state machine for the Aggregation Port is in the CURRENT state, `expired' if the Receive state machine is in the EXPIRED state, `defaulted' if the Receive state machine is in the DEFAULTED state, `initialize' if the Receive state machine is in the INITIALIZE state, `lacpDisabled' if the Receive state machine is in the LACP_DISABLED state, or `portDisabled' if the Receive state machine is in the PORT_DISABLED state. This value is read-only.
acDot3adAggPortDebugTable	1.3.6.1.4.1.2785.2.3.8.1.2.3		not-accessible	A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical port.
acDot3adAggPortEntry	1.3.6.1.4.1.2785.2.3.8.1.2.1.1		not-accessible	A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device.
acDot3adAggPortGroup	1.3.6.1.4.1.2785.2.3.8.2.1.3			A collection of objects providing information about every port in an aggregation.
acDot3adAggPortListEntry	1.3.6.1.4.1.2785.2.3.8.1.1.2.1		not-accessible	A list of the ports associated with a given Aggregator. This is indexed by OSAP node ID - supporting one Aggregator per OSAP.
acDot3adAggPortListGroup	1.3.6.1.4.1.2785.2.3.8.2.1.2			A collection of objects providing information about every port in an aggregation.
POR acDot3adAggPortListPorts	1.3.6.1.4.1.2785.2.3.8.1.1.2.1.1	PortList	read-only	The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation.
acDot3adAggPortListTable	1.3.6.1.4.1.2785.2.3.8.1.1.2		not-accessible	A table that contains a list of all the ports associated with each Aggregator.
ACN acDot3adAggPortNodeIdIndex	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.1	AcNodeId	not-accessible	The node id is the id for this specific node in the OSAP ring.
LAC acDot3adAggPortPartnerAdminKey	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.12	LacpKey	read-write	The current administrative value of the Key for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
INT acDot3adAggPortPartnerAdminPort	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.18	INTEGER	read-write	The current administrative value of the port number for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
INT acDot3adAggPortPartnerAdminPortPriority	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.20	INTEGER	read-write	The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-write value. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, and aAggPortPartnerAdminPort, in order to achieve manually configured aggregation.
LAC acDot3adAggPortPartnerAdminState	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.24	LacpState	read-write	A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. This attribute value is read-write. The assigned value is used in order to achieve manually configured aggregation.
MAC acDot3adAggPortPartnerAdminSystemID	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.10	MacAddress	read-write	A 6-octet read-write MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemPriority, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
INT acDot3adAggPortPartnerAdminSystemPriority	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.8	INTEGER	read-write	A 2-octet read-write value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with the value of aAggPortPartnerAdminSystemID, aAggPortPartnerAdminKey, aAggPortPartnerAdminPort, and aAggPortPartnerAdminPortPriority, in order to achieve manually configured aggregation.
LAC acDot3adAggPortPartnerOperKey	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.13	LacpKey	read-only	The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminKey if there is no protocol Partner. This is a 16-bit read-only value.
INT acDot3adAggPortPartnerOperPort	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.19	INTEGER	read-only	The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPort if there is no protocol Partner. This 16-bit value is read-only.
INT acDot3adAggPortPartnerOperPortPriority	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.21	INTEGER	read-only	The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminPortPriority if there is no protocol Partner. This 16-bit value is read-only.
LAC acDot3adAggPortPartnerOperState	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.25	LacpState	read-only	A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit allocations are as defined in 30.7.2.1.20. In the absence of an active protocol Partner, this value may reflect the manually configured value aAggPortPartnerAdminState. This attribute value is read-only.
MAC acDot3adAggPortPartnerOperSystemID	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.11	MacAddress	read-only	A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that there is no known protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemID if there is no protocol Partner.
INT acDot3adAggPortPartnerOperSystemPriority	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.9	INTEGER	read-only	A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
ACP acDot3adAggPortPortIndex	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.3	AcPortNumber	not-accessible	The port number on the module which represents this instance of an Ethernet access port.
ACA acDot3adAggPortSelectedAggID	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.14	AcAggInstanceValue	read-only	The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregator, either because it is in the process of detaching from an Aggregator or because there is no suitable Aggregator available for it to select. This value is read-only.
ACS acDot3adAggPortSlotIndex	1.3.6.1.4.1.2785.2.3.8.1.2.1.1.2	AcSlotNumber	not-accessible	The slot number within the chassis where this module entry resides.
acDot3adAggPortStatsEntry	1.3.6.1.4.1.2785.2.3.8.1.2.2.1		not-accessible	A list of Link Aggregation Control Protocol statistics for each port on this device.
acDot3adAggPortStatsGroup	1.3.6.1.4.1.2785.2.3.8.2.1.4			A collection of objects providing information about every port in an aggregation.
C32 acDot3adAggPortStatsIllegalRx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.5	Counter32	read-only	The number of frames received that carry the Slow Protocols Ethernet Type value (43B.4), but contain a badly formed PDU or an illegal value of Protocol Subtype (43B.4). This value is read-only.
C32 acDot3adAggPortStatsLACPDUsRxEx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.1	Counter32	read-only	The number of valid LACPDUs received on this Aggregation Port. This value is read-only.
C32 acDot3adAggPortStatsLACPDUsTx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.6	Counter32	read-only	The number of LACPDUs transmitted on this Aggregation Port. This value is read-only.
C32 acDot3adAggPortStatsMarkerPDUsRx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.2	Counter32	read-only	The number of valid Marker PDUs received on this Aggregation Port. This value is read-only.
C32 acDot3adAggPortStatsMarkerPDUsTx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.7	Counter32	read-only	The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only.
C32 acDot3adAggPortStatsMarkerResponsePDUsRx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.3	Counter32	read-only	The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only.
C32 acDot3adAggPortStatsMarkerResponsePDUsTx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.8	Counter32	read-only	The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only.
acDot3adAggPortStatsTable	1.3.6.1.4.1.2785.2.3.8.1.2.2		not-accessible	A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port.
C32 acDot3adAggPortStatsUnknownRx	1.3.6.1.4.1.2785.2.3.8.1.2.2.1.4	Counter32	read-only	The number of frames received that either: - carry the Slow Protocols Ethernet Type value (43B.4), but contain an unknown PDU, or: - are addressed to the Slow Protocols group MAC Address (43B.3), but do not carry the Slow Protocols Ethernet Type. This value is read-only.
acDot3adAggPortTable	1.3.6.1.4.1.2785.2.3.8.1.2.1		not-accessible	A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port.
acDot3adAggTable	1.3.6.1.4.1.2785.2.3.8.1.1.1		not-accessible	A table that contains information about every Aggregator that is associated with this System.
TIK acDot3adTablesLastChanged	1.3.6.1.4.1.2785.2.3.8.1.3	TimeTicks	read-only	This object indicates the time of the most recent change to the acDot3adAggTable, acDot3adAggPortListTable, or acDot3adAggPortTable.
acDot3adTablesLastChangedGroup	1.3.6.1.4.1.2785.2.3.8.2.1.1.6			A collection of objects providing information about the time of changes to the configuration of aggregations and their ports.
acLagMIB	1.3.6.1.4.1.2785.2.3.8			The Appian Communications Link Aggregation module for managing IEEE Std 802.3ad.
lagMIBObjects	1.3.6.1.4.1.2785.2.3.8.1

RFC description

Link Aggregation (IEEE 802.3ad) management for Appian Communications devices including LACP state and churn detection.

Start monitoring Appian Communications access platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download AC-LAG-MIB