89 modules in Technology: High Availability
| Module | Description |
|---|---|
| EdgeSwitch-NSF-MIB | Ubiquiti EdgeSwitch NSF (Non-Stop Forwarding) MIB for managing graceful restart and high-availability forwarding state. |
| ENTERASYS-HIGH-AVAILABILITY-MIB | Enterasys Networks MIB for configuring and monitoring high-availability in-service software upgrade (ISSU) operations. |
| ENTERASYS-VIRTUAL-SWITCH-BONDING-MIB | Enterasys Networks Virtual Switch Bonding (VSB) MIB for aggregating multiple chassis into a single logical switch fabric. |
| ERICSSON-ROUTER-ICR-CAP | Declares SNMP agent capabilities for the Ericsson Router inter-chassis redundancy (ICR) MIB. |
| ERICSSON-ROUTER-ICR-MIB | Manages inter-chassis redundancy state and switchover operations on Ericsson router platforms. |
| ERICSSON-ROUTER-ISSU-CAP | Declares SNMP agent capabilities for In-Service Software Upgrade (ISSU) on Ericsson routers. |
| ERICSSON-ROUTER-MC-LAG-CAP | Declares SNMP agent capabilities for the Ericsson Router Multi-Chassis LAG (MC-LAG) MIB. |
| ERICSSON-ROUTER-MC-LAG-MIB | Manages Multi-Chassis Link Aggregation Group configuration and redundancy state across Ericsson router chassis. |
| EXTREME-MLAG-MIB | Extreme Networks MIB for Multi-chassis Link Aggregation (MLAG), enabling configuration and status monitoring of MLAG peer links. |
| EXTREME-STACKING-MIB | Extreme Networks MIB for SummitStack and stacking technology, managing stacked switch topology, roles, and inter-unit links. |
| EXTREME-VRRP-MIB | Extreme Networks MIB providing vendor-specific extensions for Virtual Router Redundancy Protocol (VRRP) management on ExtremeXOS. |
| F10-VIRTUAL-LINK-TRUNK-MIB | Dell Force10 MIB for Virtual Link Trunking (VLT), managing dual-homed multi-chassis link aggregation peer configuration. |
| FASTPATH-NSF-MIB | Broadcom FastPath MIB for Non-Stop Forwarding (NSF) and graceful restart configuration for routing protocol high availability. |
| Fore-Red-Port-MIB | Fore Systems redundant port MIB providing configuration and status objects for hardware port redundancy on ForeRunner ATM switch modules. |
| Fore-Redundancy-MIB | Fore Systems switch redundancy MIB providing failover configuration and status objects for redundant switch processor and control modules. |
| FOUNDRY-SN-VSRP-MIB | Brocade Foundry VSRP (Virtual Switch Redundancy Protocol) MIB providing Layer 2 and Layer 3 redundancy configuration and state management. |
| FSC-HACL-MIB | Fujitsu Siemens Computers MIB for High Availability Cluster management, monitoring cluster nodes and failover status. |
| FTS-x10sure-MIB | Fujitsu MIB for the x10sure high-availability server platform, monitoring redundancy and system health. |
| H3C-ISSU-MIB | H3C MIB for In-Service Software Upgrade (ISSU) managing hitless software upgrades on H3C network devices. |
| H3C-RDDC-MIB | H3C MIB for Redundant Device Discovery and Communication (RDDC) managing device redundancy and active/standby roles. |
| HA-MIB | Manages high-availability features on Brocade devices including failover state, redundancy groups, and switchover events. |
| HH3C-BFD-STD-MIB | Manages Bidirectional Forwarding Detection (BFD) sessions on H3C devices for fast link failure detection. |
| HH3C-DRNI-MIB | Manages Distributed Resilient Network Interconnect (DRNI) for multi-chassis link aggregation on H3C devices. |
| HH3C-FAILOVER-MIB | Manages failover groups and switchover events for stateful redundancy on H3C high-availability platforms. |
| HH3C-GOLD-MIB | Manages Generic Online Diagnostics (GOLD) test scheduling and results on H3C modular router/switch platforms. |
| HH3C-ISSU-MIB | Manages In-Service Software Upgrade (ISSU) state, compatibility checks, and upgrade progression on H3C platforms. |
| HH3C-MPLSOAM-PS-MIB | Manages MPLS OAM protection switching (PS) for fast LSP failover and redundancy on H3C transport networks. |
| HH3C-RBM-MIB | HH3C MIB for Redundancy Bridge Management providing configuration of redundant bridge topologies. |
| HH3C-RDDC-MIB | HH3C MIB for Redundant Default Device Configuration (RDDC) managing dual-device redundancy on H3C networks. |
| HH3C-REDUNDANCY-POWER-MIB | HH3C MIB for redundant power supply management monitoring dual PSU status and failover on H3C chassis. |
| HH3C-RRPP-MIB | HH3C MIB for Rapid Ring Protection Protocol (RRPP) managing fast ring topology recovery on H3C switches. |
| HH3C-SMLK-MIB | HH3C MIB for Smart Link (SMLK) providing fast active/standby uplink failover on H3C access switches. |
| HiplexAF-MIB | Hiplex high-availability application framework MIB for monitoring application failover and cluster state in Siemens Hiplex systems. |
| HM2-L2REDUNDANCY-DLR-MIB | Hirschmann HiOS (HM2) Device Level Ring (DLR) redundancy MIB for EtherNet/IP DLR topology management. |
| HM2-L2REDUNDANCY-MIB | Hirschmann HiOS (HM2) Layer 2 redundancy MIB for RSTP, MSTP, and ring redundancy protocol configuration. |
| HM2-LINK-BACKUP-MIB | Hirschmann HiOS (HM2) link backup MIB for configuring active/standby uplink redundancy on Hirschmann switches. |
| HM2-TRACKING-MIB | Hirschmann HiOS (HM2) tracking MIB for interface and IP route tracking used in high-availability failover. |
| HMRING-MGMT-SNMP-MIB | Hirschmann ring management SNMP MIB for configuring HIPER-Ring redundancy protocol on Hirschmann switches. |
| HMRINGARC-MGMT-SNMP-MIB | Hirschmann ring architecture management SNMP MIB for advanced ring topology and redundancy manager configuration. |
| HMTRACKING-SNMP-MIB | Hirschmann tracking SNMP MIB for interface and connectivity tracking used in redundancy and failover scenarios. |
| HP-ICF-MAD-MIB | HP ICF SNMP MIB for Multi-Active Detection (MAD) in IRF stacking to detect and recover from split-brain scenarios on HP switches. |
| HP-ICF-SMART-LINK-MIB | HP ICF SNMP MIB for Smart Link fast failover configuration providing sub-second link redundancy on HP ProCurve switches. |
| HP-ICF-UFD-MIB | HP ICF SNMP MIB for Uplink Failure Detection (UFD) monitoring uplinks and disabling downstream ports upon uplink failure on HP ProCurve switches. |
| HP-ICF-VRRP-MIB | HP ICF SNMP MIB for Virtual Router Redundancy Protocol (VRRPv2) configuration and master election status on HP ProCurve routers. |
| HP-ICF-VRRPV3-MIB | HP ICF SNMP MIB for VRRPv3 (IPv6-capable Virtual Router Redundancy Protocol) configuration and state on HP ProCurve routing switches. |
| HP-ICF-XRRP | HP ICF SNMP MIB for XRRP (XL Router Redundancy Protocol), an HP ProCurve 5300xl series proprietary virtual router redundancy protocol. |
| HP-SN-IP-VRRP-MIB | HP ServerNet (Foundry-heritage) SNMP MIB for VRRP virtual router management and failover state on HP SN routing switches. |
| HP-SN-VSRP-MIB | HP ServerNet (Foundry-heritage) SNMP MIB for Virtual Switch Redundancy Protocol (VSRP) configuration and failover state on HP SN devices. |
| HP-VSF-VC-MIB | HP SNMP MIB for Virtual Switching Framework (VSF) virtual chassis monitoring including member state and operational status on HP Aruba switches. |
| HPICFHIGHAVAILABILITY-MIB | HP ICF SNMP MIB for high availability management including redundant supervisor failover and HA state on HP ProCurve chassis switches. |
| HPN-ICF-EPON-FB-MIB | Manages EPON fiber backup (FB) protection switching and redundancy on HP/Comware optical access equipment. |
| HPN-ICF-FTM-MIB | Manages fabric topology management (FTM) for cluster interconnect and IRF fabric on HP/Comware switches. |
| HPN-ICF-ISSU-MIB | Manages In-Service Software Upgrade (ISSU) procedures and state transitions on HP/Comware carrier-grade devices. |
| HPN-ICF-MPLSOAM-PS-MIB | Manages MPLS OAM protection switching (PS) groups and failover policies for LSP redundancy on HP/Comware devices. |
| HPN-ICF-RCR-MIB | Manages Router Configuration Replication (RCR) for synchronizing configuration across redundant HP/Comware devices. |
| HPN-ICF-RDDC-MIB | Manages Redundant Device Detection and Control (RDDC) for chassis high-availability on HP/Comware platforms. |
| HPN-ICF-RRPP-MIB | Manages Rapid Ring Protection Protocol (RRPP) ring topology and failover state on HP/Comware switches. |
| HPN-ICF-SMLK-MIB | Manages Smart Link (SMLK) active/standby uplink groups for fast convergence on HP/Comware switches. |
| HUAWEI-APS-MIB | Huawei Automatic Protection Switching MIB for managing linear APS groups and protection switching on SDH/SONET and optical transport interfaces. |
| HUAWEI-DAD-MIB | Huawei DAD (Dual Active Detection) MIB providing objects to configure and monitor dual-active detection in stacked or clustered Huawei switch systems. |
| HUAWEI-DEHA-MIB | Huawei DEHA (Device Enhanced High Availability) MIB for managing enhanced high availability features including non-stop routing and stateful failover. |
| HUAWEI-ESAP-HOT-STANDBY-MIB | Huawei ESAP hot standby MIB for managing hot-standby redundancy for embedded service application processor modules. |
| HUAWEI-L2VPN-PW-APS-MIB | Huawei L2VPN pseudowire APS MIB for managing automatic protection switching for pseudowire services to provide 1+1 or 1:1 PW redundancy. |
| HUAWEI-MPLSOAM-PS-MIB | Huawei MPLS OAM protection switching MIB for managing LSP protection groups and switchover events. |
| HUAWEI-PROTECTION-MIB | Huawei protection switching MIB for managing 1+1 and 1:N protection groups and automatic protection switching (APS). |
| HUAWEI-RANAPS-MIB | Huawei MIB for RAN APS (Radio Access Network Automatic Protection Switching), used to manage protection of microwave backhaul links. |
| HUAWEI-RBRP-MIB | Huawei RBRP (Resilient Bridge Ring Protocol) MIB for managing ring protection on Ethernet aggregation networks. |
| HUAWEI-RRPP-MIB | Huawei RRPP (Rapid Ring Protection Protocol) MIB for managing proprietary Ethernet ring protection with sub-50ms recovery. |
| HUAWEI-RSTP-EXT-MIB | Huawei RSTP extensions MIB providing proprietary rapid spanning tree protocol enhancements including edge port and BPDU guard. |
| HUAWEI-SECURITY-HRP-MIB | Huawei security HRP (Huawei Redundancy Protocol) MIB for managing firewall high-availability heartbeat and session synchronization. |
| HUAWEI-SEP-MIB | Huawei SEP (Smart Ethernet Protection) MIB for managing Ethernet ring protection instances and topology change notifications. |
| HUAWEI-SMARTLINK-MIB | Huawei SmartLink MIB for managing primary/backup uplink switching with sub-second failover on access switches. |
| HUAWEI-SWITCHOVER-MIB | Huawei switchover MIB for managing active/standby control plane switchover events, GR (graceful restart) configuration, and NSF. |
| HUAWEI-VGMP-MIB | Huawei VGMP (VRRP Group Management Protocol) MIB for managing synchronized VRRP group failover on Huawei firewalls. |
| IEC-62439-3-MIB | IEC MIB implementing management for the IEC 62439-3 (PRP/HSR) high-availability redundancy protocol used in industrial Ethernet networks. |
| IEEE8021-TEIPS-MIB | IEEE 802.1 MIB for Traffic Engineering Instance Protection Switching (TEIPS) managing protection paths in PBB-TE networks. |
| IEEE8021-TEIPS-V2-MIB | IEEE 802.1 MIB version 2 for Traffic Engineering Instance Protection Switching providing updated PBB-TE protection management. |
| INFORMANT-MSCS | Informant Systems MIB for monitoring Microsoft Cluster Server (MSCS) resource groups and failover cluster state via SNMP. |
| IP-LRRP-MIB | Lucent/Avaya Lucent Router Redundancy Protocol (LRRP) MIB providing SNMP objects for router redundancy group management. |
| IPFRR-MIB | IETF IP Fast ReRoute (IPFRR) MIB providing SNMP objects for monitoring loop-free alternate and repair paths for fast IP recovery. |
| JUNIPER-CHASSIS-CLUSTER-MIB | Provides management objects for chassis clustering (high availability) on Juniper Networks SRX firewalls, including redundancy group and node status. |
| Juniper-Ha-Redundancy-CONF | Defines conformance statements for high availability and redundancy management on Juniper Networks E-series platforms. |
| Juniper-REDUNDANCY-MIB | MIB from Juniper Networks for tracking the redundancy and failover state of routing engines and interface modules on E-series equipment. |
| JUNIPER-RPS-MIB | Juniper Networks MIB for monitoring Redundant Power System (RPS) status on Juniper EX series switches. |
| JUNIPER-VIRTUALCHASSIS-MIB | Juniper Networks MIB for monitoring Virtual Chassis configurations, member roles, and interconnect status on Juniper EX switches. |
| KEEPALIVED-MIB | MIB for monitoring Keepalived VRRP and health-check daemon status on Linux servers providing high-availability IP failover. |
| LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB | HP StorageWorks LeftHand Networks MIB for monitoring SAN/iQ cluster configuration and health for HP P4000 storage systems. |
| LEFTHAND-NETWORKS-NUS-COMMON-CLUSTERING-MIB | LeftHand Networks MIB for monitoring SAN/iQ cluster configuration and replication on LeftHand iSCSI storage appliances. |
| LEGATO-CLUSTER-MIB | Legato Systems (now part of EMC/Dell) MIB for monitoring cluster configuration and failover status in Legato cluster environments. |