HiplexAF-MIB

All MIBs › HiplexAF-MIB

Category: Technology: High Availability, Vendor: Siemens

Description: Hiplex high-availability application framework MIB for monitoring application failover and cluster state in Siemens Hiplex systems.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HiplexAF-MIB?

HiplexAF-MIB is a Siemens (sni enterprise branch) MIB for the Hiplex Application Framework, a high-availability clustering layer used on Siemens/Fujitsu-Siemens host environments to coordinate application failover across multiple hosts. It exposes cluster/version identity objects and a host table describing each participating host's operational state, pending event identifiers, and operator role within the failover cluster. It monitors software/cluster status rather than physical hardware, specifically tracking each host's state indicator, pending event IDs, and operator role so administrators can confirm a healthy active/standby posture and detect a host that has dropped out of the cluster. As a Siemens product MIB under the sni tree, it has no dependency on standard IETF hardware MIBs, being purely an application-layer status MIB. It is typically deployed in Siemens Hiplex high-availability host clusters running critical batch or transaction-processing workloads, and administrators can download the HiplexAF-MIB file to load it into their cluster monitoring tools.

IPNetwork Monitor allows you to monitor SNMP objects defined in HiplexAF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Siemens Hiplex host cluster node

Monitoring Examples

Polling hiplexAFHostTable/hiplexAFHostEntry rows (indexed via hiplexAFHostTabNum) exposes hiplexAFHostName, hiplexAFHostStateInd, and hiplexAFHostOperatorRole for each cluster member; an operator would watch hiplexAFHostStateInd across all hosts to confirm the expected number are active, with an unexpected state change signaling a failover event or lost node.

What Can Be Monitored

per-host cluster state
host operator role
pending host events
application framework version
terminal host binding

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
sni	1.3.6.1.4.1.231
sniProductMibs	1.3.6.1.4.1.231.2
sniHiplexAF	1.3.6.1.4.1.231.2.35
hiplexAFObjects	1.3.6.1.4.1.231.2.35.1
hiplexAFGlobalData	1.3.6.1.4.1.231.2.35.1.1
STR hiplexAFVersion	1.3.6.1.4.1.231.2.35.1.1.1	DisplayString	read-only	Version of Hiplex AF agent
STR hiplexAFSPVSUserid	1.3.6.1.4.1.231.2.35.1.1.2	DisplayString	read-only	User-Id of Hiplex AF (usually TSOS)
STR hiplexAFSPVSCatid	1.3.6.1.4.1.231.2.35.1.1.3	DisplayString	read-write	Catalog-Id of Shared Pubset containing Jobvariables and Files of Hiplex AF
INT hiplexAFState	1.3.6.1.4.1.231.2.35.1.1.4	INTEGER	read-write	State of Hiplex AF: started: at least one main procedure has been started on one host stopped: Hiplex AF is stopped. No Hiplex AF procedure is running on any host undefined: state of Hiplex AF is unkown. Jobvariables with correct value could not be found. State may be set to stopped if it is started.
STR hiplexAFTermHost	1.3.6.1.4.1.231.2.35.1.1.5	DisplayString	read-only	BCAM Name of the system where termination request for Hiplex AF was started.
hiplexAFHostInfo	1.3.6.1.4.1.231.2.35.1.2
INT hiplexAFHostTabNum	1.3.6.1.4.1.231.2.35.1.2.1	INTEGER	read-only	number of Hosts in the availability cluster
hiplexAFHostTable	1.3.6.1.4.1.231.2.35.1.2.2		not-accessible	The table of host in the availability cluster
hiplexAFHostEntry	1.3.6.1.4.1.231.2.35.1.2.2.1		not-accessible	entry for each host
STR hiplexAFHostName	1.3.6.1.4.1.231.2.35.1.2.2.1.1	DisplayString	read-only	BCAM Name of the system
INT hiplexAFHostEventId	1.3.6.1.4.1.231.2.35.1.2.2.1.2	INTEGER	read-only	Request Indicator for the main procedure
INT hiplexAFHostStateInd	1.3.6.1.4.1.231.2.35.1.2.2.1.3	INTEGER	read-write	State of the main procedure. Indicator for partitipation of the host. State may only be set to working if it is terminated.
STR hiplexAFHostOperatorRole	1.3.6.1.4.1.231.2.35.1.2.2.1.4	DisplayString	read-write	Value of parameter Operator-Role of START-XAF command
STR hiplexAFHostHomeCatid	1.3.6.1.4.1.231.2.35.1.2.2.1.5	DisplayString	read-only	Home Catalog Id of the system
INT hiplexAFHostSystemId	1.3.6.1.4.1.231.2.35.1.2.2.1.6	INTEGER	read-only	SystemId of the system according to the output of the SHOW-SHARED-PUBSET-command
STR hiplexAFHostBS2Version	1.3.6.1.4.1.231.2.35.1.2.2.1.7	DisplayString	read-only	Version of BS2000 on the system according to the output of the SHOW-SHARED-PUBSET-command
INT hiplexAFHostImcatInd	1.3.6.1.4.1.231.2.35.1.2.2.1.8	INTEGER	read-only	Sharer State of the host, according to the output of the SHOW-SHARED-PUBSET-command
INT hiplexAFHostMasterSlaveInd	1.3.6.1.4.1.231.2.35.1.2.2.1.9	INTEGER	read-only	Sharer type of the host
INT hiplexAFHostSnmpAgentStateInd	1.3.6.1.4.1.231.2.35.1.2.2.1.10	INTEGER	read-write	State of the SNMP-Subagent. State may be set to not-working if it is working.
hiplexAFSWUInfo	1.3.6.1.4.1.231.2.35.1.3
INT hiplexAFSWUTabNum	1.3.6.1.4.1.231.2.35.1.3.1	INTEGER	read-only	number of Switch Units in the availability cluster
hiplexAFSWUTable	1.3.6.1.4.1.231.2.35.1.3.2		not-accessible	The table of host in the availability cluster
hiplexAFSWUEntry	1.3.6.1.4.1.231.2.35.1.3.2.1		not-accessible	entry for each host
STR hiplexAFSWUName	1.3.6.1.4.1.231.2.35.1.3.2.1.1	DisplayString	read-only	Name of the switch unit
STR hiplexAFSWUCreaTime	1.3.6.1.4.1.231.2.35.1.3.2.1.2	DisplayString	read-only	Creation Time of Switch Unit (configuration file)
STR hiplexAFSWUWorkSystem	1.3.6.1.4.1.231.2.35.1.3.2.1.3	DisplayString	read-write	BCAM Name of the system which presently is work system for this switch unit. Changing the value of this object will start a switch procedure.
STR hiplexAFSWUVirtHost	1.3.6.1.4.1.231.2.35.1.3.2.1.4	DisplayString	read-only	BCAM Name of the virtual host of the switch unit
STR hiplexAFSWUVirtHostAct	1.3.6.1.4.1.231.2.35.1.3.2.1.5	DisplayString	read-only	Name of the procedure for activating the routes to the virtual host
STR hiplexAFSWUVirtHostDeact	1.3.6.1.4.1.231.2.35.1.3.2.1.6	DisplayString	read-only	Name of the procedure for deactivating the routes to the virtual host
INT hiplexAFSWUFEPNumber	1.3.6.1.4.1.231.2.35.1.3.2.1.7	INTEGER	read-only	Number of front end processors
INT hiplexAFSWUPubsetNumber	1.3.6.1.4.1.231.2.35.1.3.2.1.8	INTEGER	read-only	Number of non-shared pubsets used by applications of the switch unit
INT hiplexAFSWUApplicationNumber	1.3.6.1.4.1.231.2.35.1.3.2.1.9	INTEGER	read-only	Number of applications contained in this switch unit
hiplexAFSWUHostParamInfo	1.3.6.1.4.1.231.2.35.1.4
hiplexAFSWUHostParamTable	1.3.6.1.4.1.231.2.35.1.4.1		not-accessible	The table of host specific Parameters of Switch Units
hiplexAFSWUHostParamEntry	1.3.6.1.4.1.231.2.35.1.4.1.1		not-accessible	entry for each host
INT hiplexAFSWUHostParamEventId	1.3.6.1.4.1.231.2.35.1.4.1.1.1	INTEGER	read-only	Last action of the switch unit on the system
INT hiplexAFSWUHostParamStateInd	1.3.6.1.4.1.231.2.35.1.4.1.1.2	INTEGER	read-write	State of the Switch Unit. Value terminated may be changed to work or standby
INT hiplexAFSWUHostParamPriority	1.3.6.1.4.1.231.2.35.1.4.1.1.3	INTEGER	read-write	Priority of the host in case of an automatic switch
STR hiplexAFSWUHostParamOperatorRole	1.3.6.1.4.1.231.2.35.1.4.1.1.4	DisplayString	read-write	Value of parameter Operator-Role of START-SWITCH-UNIT command
hiplexAFSWUHostFEPInfo	1.3.6.1.4.1.231.2.35.1.5
INT hiplexAFSWUHostFEPTabNum	1.3.6.1.4.1.231.2.35.1.5.1	INTEGER	read-only	number of FEP Entries
hiplexAFSWUHostFEPTable	1.3.6.1.4.1.231.2.35.1.5.2		not-accessible	The table of parameters of switch units concerning front end processors
hiplexAFSWUHostFEPEntry	1.3.6.1.4.1.231.2.35.1.5.2.1		not-accessible	Entry describing a relation between a switch units and front end processor
INT hiplexAFSWUHostFEPIndex	1.3.6.1.4.1.231.2.35.1.5.2.1.1	INTEGER	read-only	Index of Front End Processor
STR hiplexAFSWUHostFEPName	1.3.6.1.4.1.231.2.35.1.5.2.1.2	DisplayString	read-write	BCAM Name of Front End Processor
INT hiplexAFSWUHostFEPPortnumber	1.3.6.1.4.1.231.2.35.1.5.2.1.3	INTEGER	read-write	Number of Port used for the System
hiplexAFSWUVolumeInfo	1.3.6.1.4.1.231.2.35.1.6
INT hiplexAFSWUVolumeTabNum	1.3.6.1.4.1.231.2.35.1.6.1	INTEGER	read-only	number of data volumes
hiplexAFSWUVolumeTable	1.3.6.1.4.1.231.2.35.1.6.2		not-accessible	Table of data volumes
hiplexAFSWUVolumeEntry	1.3.6.1.4.1.231.2.35.1.6.2.1		not-accessible	Entry for each data volume
STR hiplexAFSWUVolumeName	1.3.6.1.4.1.231.2.35.1.6.2.1.1	DisplayString	read-only	Name of Data Volume
STR hiplexAFSWUVolumeTypeName	1.3.6.1.4.1.231.2.35.1.6.2.1.2	DisplayString	read-only	Name of Data Volumetype
INT hiplexAFSWUVolumeType	1.3.6.1.4.1.231.2.35.1.6.2.1.3	INTEGER	read-only	Type of data volume
STR hiplexAFSWUVolumeImportProc	1.3.6.1.4.1.231.2.35.1.6.2.1.4	DisplayString	read-only	Name of procedure importing data volume
STR hiplexAFSWUVolumeExportProc	1.3.6.1.4.1.231.2.35.1.6.2.1.5	DisplayString	read-only	Name of procedure exporting data volume
hiplexAFSWUApplicationInfo	1.3.6.1.4.1.231.2.35.1.7
INT hiplexAFSWUApplicationTabNum	1.3.6.1.4.1.231.2.35.1.7.1	INTEGER	read-only	Number of applications
hiplexAFSWUApplicationTable	1.3.6.1.4.1.231.2.35.1.7.2		not-accessible	Table of applications
hiplexAFSWUApplicationEntry	1.3.6.1.4.1.231.2.35.1.7.2.1		not-accessible	entry for each application
STR hiplexAFSWUApplicationMonJVName	1.3.6.1.4.1.231.2.35.1.7.2.1.1	DisplayString	read-only	Name of jobvariable monitoring application
INT hiplexAFSWUApplicationType	1.3.6.1.4.1.231.2.35.1.7.2.1.2	INTEGER	read-only	Application type
STR hiplexAFSWUApplicationStartProc	1.3.6.1.4.1.231.2.35.1.7.2.1.3	DisplayString	read-only	Procedure used to start the application
STR hiplexAFSWUApplicationStopProc	1.3.6.1.4.1.231.2.35.1.7.2.1.4	DisplayString	read-only	Procedure used to stop the application
hiplexAFPubsetVolumeInfo	1.3.6.1.4.1.231.2.35.1.8
hiplexAFTrapFilterTable	1.3.6.1.4.1.231.2.35.1.20		not-accessible	This double-indexed table is a matrix containing an indicator for each pair (host1,host2). A HIPLEX-AF subagent residing on host1 will send traps concerning events of host2 only if the indicator has value yes.
hiplexAFTrapFilterEntry	1.3.6.1.4.1.231.2.35.1.20.1		not-accessible	Entry for each pair (host1,host2)
STR hiplexAFTrapFilterHost1Name	1.3.6.1.4.1.231.2.35.1.20.1.1	DisplayString	read-only	BCAM Name of the system where HIPLEX-AF subagent is running
STR hiplexAFTrapFilterHost2Name	1.3.6.1.4.1.231.2.35.1.20.1.2	DisplayString	read-only	BCAM Name of the system in the HIPLEX-AF cluster.
INT hiplexAFTrapFilterTrapSendInd	1.3.6.1.4.1.231.2.35.1.20.1.3	INTEGER	read-write	yes: traps will be sent. no: no traps will be sent.
hiplexAFTraps	1.3.6.1.4.1.231.2.35.2
NTF hiplexAFStart	1.3.6.1.4.1.231.2.35.2.0.301			Hiplex AF main procedure has been started.
NTF hiplexAFSWUStart	1.3.6.1.4.1.231.2.35.2.0.302			Switch unit procedure has been started.
NTF hiplexAFStop	1.3.6.1.4.1.231.2.35.2.0.303			Termination of Hiplex AF has been started.
NTF hiplexAFCrash	1.3.6.1.4.1.231.2.35.2.0.304			A system has been terminated abnormally.
NTF hiplexAFSWUAppStop	1.3.6.1.4.1.231.2.35.2.0.305			The applications of a switch unit will be stopped.
NTF hiplexAFSWUAppStart	1.3.6.1.4.1.231.2.35.2.0.306			The applications of a switch unit will be started.
NTF hiplexAFSWUStop	1.3.6.1.4.1.231.2.35.2.0.307			Switch unit procedure has been stopped.

RFC description

Provides management objects for Siemens HIPLEX AF system including hosts, applications, and volumes.

Start monitoring Siemens Hiplex host cluster node with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HiplexAF-MIB

What Is HiplexAF-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description