| OID symbolic | OID numeric | Type | Access | Description |
|---|
| NTF redundancyFabricSwitchover | 1.3.6.1.4.1.326.2.2.0.2018 | | | This trap reports the change of active fabric due to an
automatic or revertive switchover. The fabric identified
by the trap variable asx4000RedFabricIndex is the newly
active fabric. |
| asx4000RedundancyModule | 1.3.6.1.4.1.326.2.2.1.9 | | | The Fore ASX-4000 redundancy mib. |
| NTF redundancyFabricErrorCleared | 1.3.6.1.4.1.326.2.2.1.9.0.2 | | | This trap reports the clearing of the active redundancy
fabric error for the fabric identified by the trap
variable asx4000RedFabricIndex. |
| NTF redundancyFabricErrorDetected | 1.3.6.1.4.1.326.2.2.1.9.0.3 | | | This trap reports the declaration of the active
redundancy fabric error for the fabric identified
by the trap variable asx4000RedFabricIndex. |
| NTF redundancyNetmodErrorCleared | 1.3.6.1.4.1.326.2.2.1.9.0.4 | | | This trap reports the clearing of the active redundancy
netmod error for the netmod identified by the trap
variables asx4000RedNetmodFabIndex and
asx4000RedNetmodIndex. |
| NTF redundancyNetmodErrorDetected | 1.3.6.1.4.1.326.2.2.1.9.0.5 | | | This trap reports the declaration of the active redundancy
netmod error for the netmod identified by the trap
variables asx4000RedNetmodFabIndex and
asx4000RedNetmodIndex. |
| asx4000RedFabricGroup | 1.3.6.1.4.1.326.2.2.1.9.1 | | | |
| asx4000RedFabricTable | 1.3.6.1.4.1.326.2.2.1.9.1.1 | | not-accessible | A table of fabric entries. |
| asx4000RedFabricEntry | 1.3.6.1.4.1.326.2.2.1.9.1.1.1 | | not-accessible | A table entry containing fabric information. |
| I32 asx4000RedFabricIndex | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.1 | Integer32 | read-only | The index of this fabric |
| INT asx4000RedFabricAdminMode | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.2 | INTEGER | read-only | The admin mode for this fabric |
| INT asx4000RedFabricOperState | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.3 | INTEGER | read-only | The oper state for this fabric |
| INT asx4000RedFabricPendingAdminMode | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.4 | INTEGER | read-write | This variable is used to set the value for admin mode for
this fabric.The asx4000RedFabricAdminMode variable is set
to this value on setting the asx4000RedFabricCommit variable |
| INT asx4000RedFabricCommittedState | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.5 | INTEGER | read-only | This variable indicates if a command has been committed
for this particular fabric. |
| INT asx4000RedFabricCloningState | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.6 | INTEGER | read-only | The cloning state of this fabric |
| INT asx4000RedFabricSwitchCommand | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.7 | INTEGER | read-write | User initiated command at fabric level switchovers. Setting
this variable with the following values causes the switchover to
happen as explained.
active - causes a switchover to active for this
fabric
standy - causes a switchover to standby for this
fabric
Note this object is write-only and reading it will
result in implementation-specific results. |
| ASX asx4000RedFabricRedundancyState | 1.3.6.1.4.1.326.2.2.1.9.1.1.1.8 | Asx4000RedundancyState | read-only | This is the current redundancy state of th efabric. The
possible values for this variable are dependent upon whether
the fabric is protected or not, and whether it supports
passive or active redundancy. |
| INT asx4000RedFabricGroupCommit | 1.3.6.1.4.1.326.2.2.1.9.1.3 | INTEGER | read-write | A command to commit a fabric group configuration
Note this object is write-only and reading it will
result in implementation-specific results. |
| asx4000RedPortCardGroup | 1.3.6.1.4.1.326.2.2.1.9.2 | | | |
| asx4000RedPortCardTable | 1.3.6.1.4.1.326.2.2.1.9.2.1 | | not-accessible | A table of 4000Red Portcard information. |
| asx4000RedPortCardEntry | 1.3.6.1.4.1.326.2.2.1.9.2.1.1 | | not-accessible | A table entry containing portcard information. |
| I32 asx4000RedPortCardFabIndex | 1.3.6.1.4.1.326.2.2.1.9.2.1.1.1 | Integer32 | read-only | The fabric index this portcard is connected to |
| INT asx4000RedPortCardIndex | 1.3.6.1.4.1.326.2.2.1.9.2.1.1.2 | INTEGER | read-only | The netmod pair index of this portcard |
| INT asx4000RedPortCardCloningState | 1.3.6.1.4.1.326.2.2.1.9.2.1.1.3 | INTEGER | read-only | The netmod pair index of this portcard |
| asx4000RedundancyGroup | 1.3.6.1.4.1.326.2.2.1.9.3 | | | |
| asx4000RedundancyGroupTable | 1.3.6.1.4.1.326.2.2.1.9.3.1 | | not-accessible | This is the Redundancy Group table. |
| asx4000RedundancyGroupEntry | 1.3.6.1.4.1.326.2.2.1.9.3.1.1 | | not-accessible | This is a Redundancy Group entry, which represents the
configuration of a working and protection fabric and
their associated portcards. |
| INT asx4000RedGroupName | 1.3.6.1.4.1.326.2.2.1.9.3.1.1.1 | INTEGER | read-only | This is the redundancy group name. A redundancy group
name identifies a working and protection fabric and their
associated portcards are a single unit. |
| INT asx4000RedGroupRevertMode | 1.3.6.1.4.1.326.2.2.1.9.3.1.1.2 | INTEGER | read-write | This is the revert mode for this redundancy group. If
the revert mode is on(1), automatic switchover from the
protection fabric to the working fabric will occur if
the working fabric becomes available. Setting the revert
mode to off(2) disables this behavior. |
| I32 asx4000RedGroupQualifyTimer | 1.3.6.1.4.1.326.2.2.1.9.3.1.1.3 | Integer32 | read-write | This is the qualification timer in minutes for this
redundancy group. For fabric and portcards that support
active redundancy, asx4000RedGroupQualifyTimer is the
number of minutes that an errored fabric or portcard
must undergo error-free loopback testing before
being declared as an available fabric or portcard.
This timer has no effect for fabrics and portcards
that do not support active redundancy. |
| I32 asx4000RedGroupErrorThreshold | 1.3.6.1.4.1.326.2.2.1.9.3.1.1.4 | Integer32 | read-write | This is the loopback error threshold in cells for this
redundancy group. For fabrics and portcards that support
active redundancy, if the number of loopback cell errors
equals or exceeds asx4000RedGroupErrorThreshold during
the past asx4000RedGroupErrorBlockSize loopback cells,
then an error condition is declared for the
loopback components. Setting this error threshold to
zero (0) disables error checking. The maximum value is
the error block size asx4000RedGroupErrorBlockSize. |
| I32 asx4000RedGroupErrorBlockSize | 1.3.6.1.4.1.326.2.2.1.9.3.1.1.5 | Integer32 | read-only | This is the loopback error block size in cells for this
redundancy group. For fabrics and portcards that support
active redundancy, this is the number of consecutive
loopback cells over which the error threshold
asx4000RedGroupErrorThreshold will be applied. |
| asx4000RedNetmodGroup | 1.3.6.1.4.1.326.2.2.1.9.4 | | | |
| asx4000RedNetmodTable | 1.3.6.1.4.1.326.2.2.1.9.4.1 | | not-accessible | A table of 4000Red Netmod information. |
| asx4000RedNetmodEntry | 1.3.6.1.4.1.326.2.2.1.9.4.1.1 | | not-accessible | A table entry containing netmod information. |
| I32 asx4000RedNetmodFabIndex | 1.3.6.1.4.1.326.2.2.1.9.4.1.1.1 | Integer32 | read-only | The fabric index this netmod is connected to |
| I32 asx4000RedNetmodIndex | 1.3.6.1.4.1.326.2.2.1.9.4.1.1.2 | Integer32 | read-only | The netmod index of this netmod |
| ASX asx4000RedNetmodRedundancyState | 1.3.6.1.4.1.326.2.2.1.9.4.1.1.3 | Asx4000RedundancyState | read-only | This is the current redundancy state of the netmod. The
possible values for this variable are dependent upon whether
the fabric to which this netmod is connection to is protected
or not, and whether it supports passive or active redundancy. |
