All MIBs › LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB
Organization: Hewlett Packard Company, StorageWorks Division
Last Updated: 2010-06-23
Category: Domain: Storage, Technology: High Availability, Vendor: HP/HPE
Description: HP StorageWorks LeftHand Networks MIB for monitoring SAN/iQ cluster configuration and health for HP P4000 storage systems.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB?
LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB is an HP StorageWorks (originally LeftHand Networks) SNMP module for the SAN/iQ clustering software used on P4000 series network storage modules, exposing cluster configuration and health information. It covers management-group-level data (name, enabled state, quorum status, description, license time remaining), manager node counts (active vs total), and per-cluster and per-module inventory tables. This is squarely a hardware/software status monitoring MIB: it reveals whether a storage cluster has quorum (critical for SAN/iQ data availability), how many of its manager nodes are active versus configured, and how many storage modules and clusters exist in the management group, plus a remaining-license-time counter. It is vendor-specific to HP/LeftHand's SAN/iQ software stack and includes its own AGENT-CAPABILITIES/conformance objects, so it doesn't lean heavily on other MIBs beyond standard SNMPv2 conventions. It's deployed in HP P4000/LeftHand SAN environments where storage admins monitor cluster quorum and manager health to avoid storage outages. Engineers can download the LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in LEFTHAND-NETWORKS-NSM-CLUSTERING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- HP StorageWorks P4000 SAN storage node (LeftHand Networks SAN/iQ)
Monitoring Examples
An admin would poll clusMgmtGroupQuorum and compare clusManagerTable's active vs. configured manager counts (clusMgmtGroupActiveManagerCount vs clusMgmtGroupManagerCount) to detect a cluster that has lost quorum due to manager nodes going offline. clusModuleTable and clusClusterTable let an admin enumerate all storage modules and clusters registered in the management group, while clusMgmtGroupLicenseTimeRemaining flags an approaching license expiration. A drop in clusMgmtGroupActiveManagerCount below the quorum threshold would be a critical alert indicating the SAN cluster is at risk of losing write availability.
What Can Be Monitored
- cluster quorum status
- active vs total manager node count
- management group enabled state
- license time remaining
- storage module inventory/count
- cluster inventory/count
This MIB depends on
Related MIBs
Imported Objects
From HCNUM-TC
| CounterBasedGauge64 |
From LEFTHAND-NETWORKS-GLOBAL-REG-MIB
| lhnModules | OBJECT-IDENTITY |
| lhnNsm | OBJECT-IDENTITY |
From LEFTHAND-NETWORKS-NSM-MIB
| lhnNsmClustering | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using clusModuleStatsStoreLatencyTotal OID:
Select an HP StorageWorks P4000 SAN storage node (LeftHand SAN/iQ clustering) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type clusModuleStatsStoreLatencyTotal into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The total time spent waiting for IO operations to complete on the storage module. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in ms), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| lhnNsmClusteringModule | 1.3.6.1.4.1.9804.2.1.12 | HP StorageWorks P4000 Cluster Information | ||
| lhnNsmClusteringModuleConformance | 1.3.6.1.4.1.9804.2.1.12.1 | |||
| lhnNsmClusteringModuleCompliances | 1.3.6.1.4.1.9804.2.1.12.1.1 | |||
| lefthandNetworksNsmClusteringMibCompliance | 1.3.6.1.4.1.9804.2.1.12.1.1.1 | The compliance statement. | ||
| lhnNsmClusteringModuleGroups | 1.3.6.1.4.1.9804.2.1.12.1.2 | |||
| lefthandNetworksNsmClusteringGroup | 1.3.6.1.4.1.9804.2.1.12.1.2.1 | The default group for all NSM Clustering objects. | ||
| lefthandNetworksNsmClusteringGroupObsolete | 1.3.6.1.4.1.9804.2.1.12.1.2.2 | The group for all obsolete and deprecated NSM Cluster objects. | ||
| STR clusMgmtGroupName | 1.3.6.1.4.1.9804.3.1.1.2.12.1 | DisplayString | read-only | Management group name. |
| T/F clusMgmtGroupIsEnabled | 1.3.6.1.4.1.9804.3.1.1.2.12.2 | TruthValue | read-only | True if the storage module is in a management group, false otherwise. |
| I32 clusMgmtGroupQuorum | 1.3.6.1.4.1.9804.3.1.1.2.12.3 | Integer32 | read-only | Minimum number of managers required to management group quorum and functionality. |
| STR clusMgmtGroupDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.4 | DisplayString | read-only | Management group description. |
| I32 clusMgmtGroupActiveManagerCount | 1.3.6.1.4.1.9804.3.1.1.2.12.5 | Integer32 | read-only | Number of active managers in the management group. |
| I32 clusMgmtGroupManagerCount | 1.3.6.1.4.1.9804.3.1.1.2.12.6 | Integer32 | read-only | Number of managers in the management group. |
| STR clusMgmtGroupLicenseTimeRemaining | 1.3.6.1.4.1.9804.3.1.1.2.12.43 | DisplayString | read-only | The time remaining before the feature license expires. |
| clusManagerTable | 1.3.6.1.4.1.9804.3.1.1.2.12.44 | not-accessible | A table of managers in the cluster. The number of entries is given by clusMgmtGroupManagerCount. | |
| clusManagerEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1 | not-accessible | A row of manager information. | |
| U32 clusManagerIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.1 | Unsigned32 | not-accessible | The index for the clusManagerTable table. |
| STR clusManagerName | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.2 | DisplayString | read-only | The manager name. |
| STR clusManagerVersion | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.3 | DisplayString | read-only | The manager version. |
| STR clusManagerHostSerialNo | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.4 | DisplayString | read-only | The manager serial number. |
| INT clusManagerStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.5 | INTEGER | read-only | The manager status. |
| T/F clusManagerIsVirtual | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.7 | TruthValue | read-only | True if manager is virtual, false otherwise. |
| T/F clusManagerIsFailover | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.9 | TruthValue | read-only | True if manager is a failover manager, false otherwise. |
| ROW clusManagerRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.44.1.10 | RowStatus | read-only | Table row status. Obsolete in SAN/iQ 8.5. |
| I32 clusModuleCount | 1.3.6.1.4.1.9804.3.1.1.2.12.45 | Integer32 | read-only | The number of storage systems in the cluster. |
| clusModuleTable | 1.3.6.1.4.1.9804.3.1.1.2.12.46 | not-accessible | A table of storage systems in the cluster. The number of entries is given by clusModuleCount. | |
| clusModuleEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1 | not-accessible | A row of storage system information. | |
| U32 clusModuleIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.1 | Unsigned32 | not-accessible | The index for the clusModuleTable table. |
| STR clusModuleName | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.2 | DisplayString | read-only | The storage system hostname. |
| STR clusModuleVersion | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.3 | DisplayString | read-only | The storage system SAN/iQ version. |
| STR clusModuleSerialNo | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.4 | DisplayString | read-only | The storage system serial number. |
| NUM clusModuleUsableSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.5 | CounterBasedGauge64 | read-only | The total space available for data storage on the storage module. |
| NUM clusModuleAvailableSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.6 | CounterBasedGauge64 | read-only | The current space available for data storage on the storage module. |
| T/F clusModuleIsManager | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.7 | TruthValue | read-only | True if storage system is a manager, false otherwise. |
| STR clusModuleRaidConfiguration | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.8 | DisplayString | read-only | The storage system RAID configuration. |
| STR clusModuleStorageState | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.9 | DisplayString | read-only | The state of the storage system storage server to store data. Use 'storageRaidState' to check the state of the RAID device(s). |
| INT clusModuleStorageStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.10 | INTEGER | read-only | The storage system storage server status. |
| T/F clusModuleStorageIsReady | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.11 | TruthValue | read-only | True if the storage in a module is ready, false otherwise. |
| DAT clusModuleCreationTime | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.12 | DateAndTime | read-only | The date and time the sotrage module was added to the cluster. |
| STR clusModuleDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.13 | DisplayString | read-only | The storage module description. |
| STR clusModuleClusterName | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.14 | DisplayString | read-only | The name of the cluster the storage modue is in. Empty if the storage module is not in a cluster. |
| CLU clusModuleEnabledFeatures | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.16 | ClusFeatureBits | read-only | The set of features that are enabled. |
| STR clusModuleFeatureKey | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.17 | DisplayString | read-only | The feature key. |
| INT clusModuleStorageCondition | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.19 | INTEGER | read-only | The state of the storage on the storage module. |
| C64 clusModuleStatsIOsRead | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.20 | Counter64 | read-only | Obsolete, use storageRaidStatsIOsRead |
| C64 clusModuleStatsIOsWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.21 | Counter64 | read-only | Obsolete, use storageRaidStatsIOsWrite |
| C64 clusModuleStatsKbytesRead | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.22 | Counter64 | read-only | Obsolete, use storageRaidStatsKbytesRead |
| C64 clusModuleStatsKbytesWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.23 | Counter64 | read-only | Obsolete, use storageRaidStatsKbytesWrite |
| G32 clusModuleStatsQDepthTotal | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.24 | Gauge32 | read-only | Obsolete, use storageRaidStatsQDepthTotal |
| C64 clusModuleStatsIoLatencyRead | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.25 | Counter64 | read-only | Obsolete, use storageRaidStatsIoLatencyRead |
| C64 clusModuleStatsIoLatencyWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.26 | Counter64 | read-only | Obsolete, use storageRaidStatsIoLatencyWrite |
| C64 clusModuleStatsStoreLatencyTotalEx | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.27 | Counter64 | read-only | The total time spent waiting for IO operations to complete on the storage module. |
| NUM clusModuleProvisionedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.28 | CounterBasedGauge64 | read-only | The amount of storage space that has been provisioned on the storage module. |
| NUM clusModuleUsedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.29 | CounterBasedGauge64 | read-only | The amount of storage space that has been used on the storage module. |
| ROW clusModuleRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.46.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| I32 clusClusterCount | 1.3.6.1.4.1.9804.3.1.1.2.12.47 | Integer32 | read-only | The number of clusters in the management group. |
| clusClusterTable | 1.3.6.1.4.1.9804.3.1.1.2.12.48 | not-accessible | A table of clusters in the management group. The number of entries is given by clusClusterCount. | |
| clusClusterEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1 | not-accessible | A row of cluster information. | |
| U32 clusClusterIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.1 | Unsigned32 | not-accessible | The index for the clusClusterTable table. |
| STR clusClusterName | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.2 | DisplayString | read-only | The cluster name. |
| G32 clusClusterModuleCount | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.3 | Gauge32 | read-only | The number of storage modules in the cluster. |
| G32 clusClusterVolumeCount | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.4 | Gauge32 | read-only | The number of volumes in the cluster. |
| STR clusClusterDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.5 | DisplayString | read-only | A description of the cluster. |
| NUM clusClusterHotSpareTimeout | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.7 | CounterBasedGauge64 | read-only | The number of seconds to wait before a hot spare takes over. Deprecated in SAN/iQ 7.0. |
| G32 clusClusterISNSCount | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.8 | Gauge32 | read-only | The number of iSNS entries for the cluster. |
| G32 clusClusterISCSIVirtualIPCount | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.15 | Gauge32 | read-only | The number of iSCSI Virtual IP entries for this cluster. |
| T/F clusClusterISCSIVirtualIPEnabled | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.16 | TruthValue | read-only | True if the iSCSI Virtual IPs are enabled, false otherwise. |
| NUM clusClusterAvailableSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.17 | CounterBasedGauge64 | read-only | Space available to create volumes (assuming one replica) in the cluster. Divide by the number of replicas to obtain the true number. |
| C64 clusClusterStatsIOsRead | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.20 | Counter64 | read-only | A counter of IO read operations in the cluster. |
| C64 clusClusterStatsIOsWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.21 | Counter64 | read-only | A counter of IO write operations in the cluster. |
| C64 clusClusterStatsKbytesRead | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.22 | Counter64 | read-only | The number of kB read from the cluster. |
| C64 clusClusterStatsKbytesWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.23 | Counter64 | read-only | The number of kB written to the cluster. |
| G32 clusClusterStatsQDepthRead | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.24 | Gauge32 | read-only | The number of pending read operations in the cluster. |
| G32 clusClusterStatsQDepthWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.25 | Gauge32 | read-only | The number of pending write operations in the cluster. |
| C64 clusClusterStatsIoLatencyRead | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.26 | Counter64 | read-only | The total time spent waiting for read operations to complete in the cluster. |
| C64 clusClusterStatsIoLatencyWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.27 | Counter64 | read-only | The total time spent waiting for write operations to complete in the cluster. |
| C64 clusClusterStatsCacheHits | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.28 | Counter64 | read-only | The number of read cache hits and read ahead hits in the cluster. |
| NUM clusClusterTotalSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.29 | CounterBasedGauge64 | read-only | The total space for data storage in the cluster. |
| NUM clusClusterProvisionedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.30 | CounterBasedGauge64 | read-only | The amount of storage space that has been provisioned in the cluster. |
| NUM clusClusterUsedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.31 | CounterBasedGauge64 | read-only | The amount of storage space that has been used in the cluster. |
| G32 clusClusterUtilization | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.32 | Gauge32 | read-only | The percentage of storage space that has been used in the cluster. |
| ROW clusClusterRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.48.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusClusterModuleTable | 1.3.6.1.4.1.9804.3.1.1.2.12.49 | not-accessible | A table of modules for a cluster. The number of entries is given by clusClusterModuleCount. | |
| clusClusterModuleEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.49.1 | not-accessible | A row of cluster storage modules. | |
| U32 clusClusterModuleIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.49.1.1 | Unsigned32 | not-accessible | The index for the clusClusterModuleTable table. |
| STR clusClusterModuleName | 1.3.6.1.4.1.9804.3.1.1.2.12.49.1.2 | DisplayString | read-only | The storage module name. |
| STR clusClusterModuleSerialNo | 1.3.6.1.4.1.9804.3.1.1.2.12.49.1.3 | DisplayString | read-only | The storage module serial number. |
| T/F clusClusterModuleIsHotSpare | 1.3.6.1.4.1.9804.3.1.1.2.12.49.1.4 | TruthValue | read-only | True if the storage module is a hot spare, false otherwise. Deprecated in SAN/iQ 7.0. |
| ROW clusClusterModuleRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.49.1.5 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusClusterISNSTable | 1.3.6.1.4.1.9804.3.1.1.2.12.50 | not-accessible | A table of iSNS entries for a cluster. The number of entries is given by clusClusterISNSCount. | |
| clusClusterISNSEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.50.1 | not-accessible | A row of cluster iSNS servers. | |
| U32 clusClusterISNSIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.50.1.1 | Unsigned32 | not-accessible | The index for the clusClusterISNSTable table. |
| STR clusClusterISNSHost | 1.3.6.1.4.1.9804.3.1.1.2.12.50.1.2 | DisplayString | read-only | The name or IP address of the iSNS server. |
| ROW clusClusterISNSRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.50.1.5 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusClusterISCSIVirtualIPTable | 1.3.6.1.4.1.9804.3.1.1.2.12.95 | not-accessible | A table of Virtual IPs for a cluster. The number of entries is given by clusClusterISCSIVirtualIPCount. | |
| clusClusterISCSIVirtualIPEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.95.1 | not-accessible | A row of cluster virtual IPs. | |
| U32 clusClusterISCSIVirtualIPIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.95.1.1 | Unsigned32 | not-accessible | The index for the clusClusterISCSIVirtualIPTable table. |
| IP clusClusterISCSIVirtualIPAddress | 1.3.6.1.4.1.9804.3.1.1.2.12.95.1.2 | IpAddress | read-only | The cluster virtual IP address. |
| IP clusClusterISCSIVirtualIPMask | 1.3.6.1.4.1.9804.3.1.1.2.12.95.1.3 | IpAddress | read-only | The netmask for the virtual IP address. |
| IP clusClusterISCSIVirtualIPRoute | 1.3.6.1.4.1.9804.3.1.1.2.12.95.1.4 | IpAddress | read-only | The default route for the virtual IP address. |
| ROW clusClusterISCSIVirtualIPRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.95.1.5 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| I32 clusVolumeCount | 1.3.6.1.4.1.9804.3.1.1.2.12.96 | Integer32 | read-only | The number of volumes in the cluster. |
| clusVolumeTable | 1.3.6.1.4.1.9804.3.1.1.2.12.97 | not-accessible | A table of volumes in the cluster. The number of entries is given by clusVolumeCount. | |
| clusVolumeEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1 | not-accessible | A row of volume information. | |
| U32 clusVolumeIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.1 | Unsigned32 | not-accessible | The index for the clusVolumeTable table. |
| STR clusVolumeName | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.2 | DisplayString | read-only | The volume name. |
| DAT clusVolumeCreationTime | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.3 | DateAndTime | read-only | The date and time the volume was created. |
| STR clusVolumeDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.4 | DisplayString | read-only | The volume description. |
| NUM clusVolumeSize | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.5 | CounterBasedGauge64 | read-only | The volume size. (Reported Size) |
| NUM clusVolumeSoftThreshold | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.6 | CounterBasedGauge64 | read-only | The number of kB to be used before alert is issued. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0. |
| NUM clusVolumeHardThreshold | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.7 | CounterBasedGauge64 | read-only | The number of kB to be used before the volume stops. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0. |
| I32 clusVolumeReplicaCount | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.8 | Integer32 | read-only | The volume replication level. This is only valid for volumes that use Mirrored Replication and is not used for volumes that use Parity Based Netowrk RAID (PBNR). (Use clusVolumeType to determine volume type). |
| G32 clusVolumeSnapshotCount | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.9 | Gauge32 | read-only | The number of snapshots associated with this volume. |
| G32 clusVolumeACLCount | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.10 | Gauge32 | read-only | The number of ACLs associated with this volume. |
| STR clusVolumeClusterName | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.11 | DisplayString | read-only | The name of cluster that this volume belongs to. Empty if the storage module is not in a cluster. |
| T/F clusVolumeIsSoftThresholdExceeded | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.13 | TruthValue | read-only | True is the soft threshold has been exceeded, false otherwise. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0. |
| T/F clusVolumeIsHardThresholdExceeded | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.14 | TruthValue | read-only | True is the hard threshold has been exceeded, false otherwise. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0. |
| CLU clusVolumeReplicationStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.15 | ClusReplicationStatus | read-only | The volume replication status. The status will be normal if the volume is available, faulty otherwise. |
| T/F clusVolumeIsRemoteSnapshot | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.16 | TruthValue | read-only | True if this volume is a remote snapshot, false otherwise. |
| STR clusVolumeRemoteSnapshotFailureMessage | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.17 | DisplayString | read-only | A message indicating why a remote snapshot into this volume failed. Empty if there are no errors. |
| STR clusVolumeAccessType | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.19 | DisplayString | read-only | Access type for the volume (iSCSI, etc). Only displayed if volume lists are not supported by the manager. Otherwise access type is implied by the volume list auth group. |
| G32 clusVolumeMinimumReplication | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.20 | Gauge32 | read-only | The minimum number of replicas required for writes to proceed. This is only valid for volumes that use Mirrored Replication and is not used for volumes that use Parity Based Netowrk RAID (PBNR). (Use clusVolumeType to determine volume type). |
| CLU clusVolumeCreator | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.22 | ClusCreatorTypes | read-only | The entity created this volume. |
| I32 clusVolumeAutoGrowPages | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.24 | Integer32 | read-only | The nominal number of pages autogrow should grow by. (0 = no autogrow, 1 = automatic) Deprecated in SAN/iQ 9.0, use clusVolumeAutoGrowSeconds |
| STR clusVolumeIscsiIqn | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.25 | DisplayString | read-only | The iSCSI IQN for the volume. |
| STR clusVolumeFriendlyName | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.27 | DisplayString | read-only | The friendly name for the volume. Deprecated in SAN/iQ 8.0 |
| G32 clusVolumeInitiatorCount | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.30 | Gauge32 | read-only | The number of initiator sessions. |
| NUM clusVolumeUsedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.31 | CounterBasedGauge64 | read-only | The space used by the volume. This does not include space used by snapshots that the volume depends on. |
| G32 clusVolumeClusterUsedPercent | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.32 | Gauge32 | read-only | The space used by the volume as a percentage of the cluster space. |
| NUM clusVolumeProvisionedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.33 | CounterBasedGauge64 | read-only | The space provisioned for the volume. (Provisioned Space) |
| T/F clusVolumeIsThinProvisioned | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.34 | TruthValue | read-only | True if volume uses thin provisioning, false otherwise. |
| C64 clusVolumeStatsIOsRead | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.36 | Counter64 | read-only | A counter of IO read operations for the volume. |
| C64 clusVolumeStatsIOsWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.37 | Counter64 | read-only | A counter of IO write operations for the volume. |
| C64 clusVolumeStatsKbytesRead | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.38 | Counter64 | read-only | The number of kB read from the volume. |
| C64 clusVolumeStatsKbytesWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.39 | Counter64 | read-only | The number of kB written to the volume. |
| G32 clusVolumeStatsQDepthRead | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.40 | Gauge32 | read-only | The number of pending read operations for the volume. |
| G32 clusVolumeStatsQDepthWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.41 | Gauge32 | read-only | The number of pending write operations for the volume. |
| C64 clusVolumeStatsIoLatencyRead | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.42 | Counter64 | read-only | The total time spent waiting for read operations to complete for the volume. |
| C64 clusVolumeStatsIoLatencyWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.43 | Counter64 | read-only | The total time spent waiting for write operations to complete for the volume. |
| C64 clusVolumeStatsCacheHits | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.44 | Counter64 | read-only | The number of read cache hits and read ahead hits for the volume. |
| I32 clusVolumeAutoGrowSecondsDefault | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.45 | Integer32 | read-only | The default number of seconds of IO available before autogrow starts. |
| G32 clusVolumeAutoGrowSeconds | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.46 | Gauge32 | read-only | The current number of seconds of IO available before autogrow starts. |
| INT clusVolumeType | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.47 | INTEGER | read-only | The volume type. 'MR' = Mirrored Replication, 'PBNR' = Parity Based Network RAID. |
| STR clusVolumeDataProtectionLevel | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.48 | DisplayString | read-only | The data protection level for the volume. |
| G32 clusVolumePBNRStripes | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.49 | Gauge32 | read-only | The number of data pages in a stripe for a PBNR volume. (Use clusVolumeType to determine volume type). |
| G32 clusVolumePBNRParity | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.50 | Gauge32 | read-only | The number of parity pages in a stripe for a PBNR volume. (Use clusVolumeType to determine volume type). |
| NUM clusVolumeAvailableSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.51 | CounterBasedGauge64 | read-only | The storage space available in the volume before the size is reached. For thinly provisioned volumes the cluster must have sufficient storage space to support this. |
| G32 clusVolumeUsedPercent | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.52 | Gauge32 | read-only | The percentage of storage space that has been used on the volume. |
| T/F clusVolumeIsFull | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.53 | TruthValue | read-only | True if the volume is full, false otherwise. |
| ROW clusVolumeRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.97.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusVolumeACLTable | 1.3.6.1.4.1.9804.3.1.1.2.12.98 | not-accessible | A table of ACL entries for each volume. The number of entries is given by clusVolumeACLCount. | |
| clusVolumeACLEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.98.1 | not-accessible | A row of authorization and permissions for a volume. | |
| U32 clusVolumeACLIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.98.1.1 | Unsigned32 | not-accessible | The index for the clusVolumeACLTable table. |
| STR clusVolumeACLServer | 1.3.6.1.4.1.9804.3.1.1.2.12.98.1.2 | DisplayString | read-only | The server (authorization group) name. |
| CLU clusVolumeACLPermissions | 1.3.6.1.4.1.9804.3.1.1.2.12.98.1.3 | ClusPermissionBits | read-only | The permissions bits. |
| ROW clusVolumeACLRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.98.1.6 | RowStatus | read-only | Table row status. Obsolete in SAN/iQ 8.5. |
| clusVolumeInitiatorTable | 1.3.6.1.4.1.9804.3.1.1.2.12.99 | not-accessible | A table of initiator session entries for each volume. The number of entries is given by clusVolumeInitiatorCount. | |
| clusVolumeInitiatorEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1 | not-accessible | A row of initiator parameters for a volume. | |
| U32 clusVolumeInitiatorIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.1 | Unsigned32 | not-accessible | The index for the clusVolumeInitiatorTable table. |
| STR clusVolumeInitiatorIqn | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.2 | DisplayString | read-only | The initiator IQN. |
| IP clusVolumeInitiatorAddress | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.3 | IpAddress | read-only | The initiator IP address. |
| U32 clusVolumeInitiatorPort | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.4 | Unsigned32 | read-only | The initiator port number. |
| STR clusVolumeInitiatorStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.5 | DisplayString | read-only | The initiator session status. Obsolete in SAN/iQ 8.0 |
| C64 clusVolumeInitiatorStatsIOsRead | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.6 | Counter64 | read-only | A counter of IO read operations for the initiator. |
| C64 clusVolumeInitiatorStatsIOsWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.7 | Counter64 | read-only | A counter of IO write operations for the initiator. |
| C64 clusVolumeInitiatorStatsKbytesRead | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.8 | Counter64 | read-only | The number of kB read from the initiator. |
| C64 clusVolumeInitiatorStatsKbytesWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.9 | Counter64 | read-only | The number of kB written to the initiator. |
| G32 clusVolumeInitiatorStatsQDepthRead | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.10 | Gauge32 | read-only | The number of pending read operations for the initiator. |
| G32 clusVolumeInitiatorStatsQDepthWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.11 | Gauge32 | read-only | The number of pending write operations for the initiator. |
| C64 clusVolumeInitiatorStatsIoLatencyRead | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.12 | Counter64 | read-only | The total time spent waiting for read operations to complete on the initiator. |
| C64 clusVolumeInitiatorStatsIoLatencyWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.13 | Counter64 | read-only | The total time spent waiting for write operations to complete on the initiator. |
| C64 clusVolumeInitiatorStatsCacheHits | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.14 | Counter64 | read-only | The number of read cache hits and read ahead hits for the initiator. |
| STR clusVolumeInitiatorState | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.15 | DisplayString | read-only | The initiator session state. |
| ROW clusVolumeInitiatorRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.99.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusClusterVolumeTable | 1.3.6.1.4.1.9804.3.1.1.2.12.100 | not-accessible | A table of volumes for a cluster. The number of entries is given by clusClusterVolumeCount. | |
| clusClusterVolumeEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.100.1 | not-accessible | A row of volume information for a cluster. | |
| U32 clusClusterVolumeIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.100.1.1 | Unsigned32 | not-accessible | The index for the clusClusterVolumeTable table. |
| STR clusClusterVolumeName | 1.3.6.1.4.1.9804.3.1.1.2.12.100.1.2 | DisplayString | read-only | The volume name. |
| ROW clusClusterVolumeRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.100.1.3 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusVolumeSnapshotTable | 1.3.6.1.4.1.9804.3.1.1.2.12.101 | not-accessible | A table of snapshots for a volume. The number of entries is given by clusVolumeSnapshotCount. | |
| clusVolumeSnapshotEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1 | not-accessible | A row of snapshot information for a volume. | |
| U32 clusVolumeSnapshotIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.1 | Unsigned32 | not-accessible | The index for the clusVolumeSnapshotTable table. |
| STR clusVolumeSnapshotName | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.2 | DisplayString | read-only | The snapshot name. |
| DAT clusVolumeSnapshotCreationTime | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.3 | DateAndTime | read-only | The snapshot creation time. |
| STR clusVolumeSnapshotDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.4 | DisplayString | read-only | The snapshot description. |
| NUM clusVolumeSnapshotSize | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.5 | CounterBasedGauge64 | read-only | The snapshot size. (Reported Size) |
| NUM clusVolumeSnapshotSoftThreshold | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.6 | CounterBasedGauge64 | read-only | The number of kB to be used before alert is issued. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0. |
| NUM clusVolumeSnapshotHardThreshold | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.7 | CounterBasedGauge64 | read-only | The number of kB to be used before the snapshot stops. This is not displayed if space management is enabled. Deprecated in SAN/iQ 8.0. |
| G32 clusVolumeSnapshotACLCount | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.8 | Gauge32 | read-only | The number of ACLs associated with this snapshot. |
| STR clusVolumeSnapshotScheduleName | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.10 | DisplayString | read-only | The snapshot schedule name. Empty for manual snapshots. |
| T/F clusVolumeSnapshotIsSoftThresholdExceeded | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.12 | TruthValue | read-only | True if soft threshold has been exceeded, false otherwise. |
| T/F clusVolumeSnapshotIsHardThresholdExceeded | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.13 | TruthValue | read-only | True if hard threshold has been exceeded, false otherwise. |
| CLU clusVolumeSnapshotReplicationStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.14 | ClusReplicationStatus | read-only | The snapshot replication status. The status will be normal if the snapshot is available, faulty otherwise. |
| INT clusVolumeSnapshotType | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.15 | INTEGER | read-only | The snapshot type. |
| G32 clusVolumeSnapshotCopyProgress | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.16 | Gauge32 | read-only | The remote snapshot percent complete. |
| STR clusVolumeSnapshotAccessType | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.18 | DisplayString | read-only | Access type for the snapshot (iSCSI, etc). Only displayed if volume lists are not supported by the manager. Otherwise access type is implied by the volume list auth group. |
| CLU clusVolumeSnapshotCreator | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.20 | ClusCreatorTypes | read-only | which entity created this volume |
| STR clusVolumeSnapshotIscsiIqn | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.22 | DisplayString | read-only | The snapshot iSCSI IQN. |
| STR clusVolumeSnapshotFriendlyName | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.24 | DisplayString | read-only | The snapshot friendly name. |
| STR clusVolumeSnapshotOriginalVolume | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.25 | DisplayString | read-only | The volume name the snapshot originated from for a remote snapshot. |
| STR clusVolumeSnapshotOriginalMgmtGroup | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.26 | DisplayString | read-only | The management group name the snapshot originated from for a remote snapshot. |
| G32 clusVolumeSnapshotInitiatorCount | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.27 | Gauge32 | read-only | The number of initiator sessions to this snapshot. |
| NUM clusVolumeSnapshotUsedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.28 | CounterBasedGauge64 | read-only | The space used by the snapshot. |
| NUM clusVolumeSnapshotWritableProvisionedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.29 | CounterBasedGauge64 | read-only | The maximum writable space used by snapshot. |
| G32 clusVolumeSnapshotClusterUsedPercent | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.31 | Gauge32 | read-only | The space used by the snapshot as a percentage of the cluster space. |
| NUM clusVolumeSnapshotProvisionedSpace | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.32 | CounterBasedGauge64 | read-only | The space provisioned for use by the snapshot. |
| C64 clusVolumeSnapshotStatsIOsRead | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.36 | Counter64 | read-only | A counter of IO read operations on the snapshot. |
| C64 clusVolumeSnapshotStatsIOsWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.37 | Counter64 | read-only | A counter of IO write operations on the snapshot. |
| C64 clusVolumeSnapshotStatsKbytesRead | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.38 | Counter64 | read-only | The number of kB read from the snapshot. |
| C64 clusVolumeSnapshotStatsKbytesWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.39 | Counter64 | read-only | The number of kB written to the snapshot. |
| G32 clusVolumeSnapshotStatsQDepthRead | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.40 | Gauge32 | read-only | The number of pending read operations for the snapshot |
| G32 clusVolumeSnapshotStatsQDepthWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.41 | Gauge32 | read-only | The number of pending write operations for the snapshot |
| C64 clusVolumeSnapshotStatsIoLatencyRead | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.42 | Counter64 | read-only | The total time spent waiting for read operations to complete on the snapshot. |
| C64 clusVolumeSnapshotStatsIoLatencyWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.43 | Counter64 | read-only | The total time spent waiting for write operations to complete on the snapshot. |
| C64 clusVolumeSnapshotStatsCacheHits | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.44 | Counter64 | read-only | The number of read cache hits and read ahead hits for the snapshot. |
| ROW clusVolumeSnapshotRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.101.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusVolumeSnapshotACLTable | 1.3.6.1.4.1.9804.3.1.1.2.12.102 | not-accessible | A table of authorization and permissions for each snapshot. The number of entries is given by clusVolumeSnapshotACLCount. | |
| clusVolumeSnapshotACLEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.102.1 | not-accessible | A row of authorization and permissions for a snapshot. | |
| U32 clusVolumeSnapshotACLIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.102.1.1 | Unsigned32 | not-accessible | The index for the clusVolumeSnapshotACLTable table. |
| STR clusVolumeSnapshotACLServer | 1.3.6.1.4.1.9804.3.1.1.2.12.102.1.2 | DisplayString | read-only | The name of the server (authorization group). |
| CLU clusVolumeSnapshotACLPermissions | 1.3.6.1.4.1.9804.3.1.1.2.12.102.1.3 | ClusPermissionBits | read-only | The permissions associated with this ACL. |
| ROW clusVolumeSnapshotACLRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.102.1.6 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusVolumeSnapshotInitiatorTable | 1.3.6.1.4.1.9804.3.1.1.2.12.103 | not-accessible | A table of initiator session entries for each snapshot. The number of entries is given by clusVolumeSnapshotInitiatorCount. | |
| clusVolumeSnapshotInitiatorEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1 | not-accessible | A row of initiator information for a snapshot. | |
| U32 clusVolumeSnapshotInitiatorIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.1 | Unsigned32 | not-accessible | The index for the clusVolumeSnapshotInitiatorTable table. |
| STR clusVolumeSnapshotInitiatorIqn | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.2 | DisplayString | read-only | The initiator IQN. |
| IP clusVolumeSnapshotInitiatorAddress | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.3 | IpAddress | read-only | The initiator IP address. |
| U32 clusVolumeSnapshotInitiatorPort | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.4 | Unsigned32 | read-only | The initiator port number. |
| STR clusVolumeSnapshotInitiatorStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.5 | DisplayString | read-only | The initiator session status. Obsolete in SAN/iQ 8.0. |
| C64 clusVolumeSnapshotInitiatorStatsIOsRead | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.6 | Counter64 | read-only | A counter of IO read operations on the initiator. |
| C64 clusVolumeSnapshotInitiatorStatsIOsWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.7 | Counter64 | read-only | A counter of IO read operations on the initiator. |
| C64 clusVolumeSnapshotInitiatorStatsKbytesRead | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.8 | Counter64 | read-only | The number of kB read from the initiator. |
| C64 clusVolumeSnapshotInitiatorStatsKbytesWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.9 | Counter64 | read-only | The number of kB written to the initiator. |
| G32 clusVolumeSnapshotInitiatorStatsQDepthRead | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.10 | Gauge32 | read-only | The number of pending read operations on the initiator. |
| G32 clusVolumeSnapshotInitiatorStatsQDepthWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.11 | Gauge32 | read-only | The number of pending write operations on the initiator. |
| C64 clusVolumeSnapshotInitiatorStatsIoLatencyRead | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.12 | Counter64 | read-only | The total time spent waiting for read operations to complete on the initiator. |
| C64 clusVolumeSnapshotInitiatorStatsIoLatencyWrite | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.13 | Counter64 | read-only | The total time spent waiting for read operations to complete on the initiator. |
| C64 clusVolumeSnapshotInitiatorStatsCacheHits | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.14 | Counter64 | read-only | The number of read cache hits and read ahead hits for the initiator. |
| STR clusVolumeSnapshotInitiatorState | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.15 | DisplayString | read-only | The initiator session status. |
| ROW clusVolumeSnapshotInitiatorRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.103.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| I32 clusServerCount | 1.3.6.1.4.1.9804.3.1.1.2.12.104 | Integer32 | read-only | The number of server (authorization groups) in the cluster. |
| clusServerTable | 1.3.6.1.4.1.9804.3.1.1.2.12.105 | not-accessible | A table of hosts for each server (authorization group). The number of entries is given by clusServerCount. | |
| clusServerEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1 | not-accessible | A row of server (authorization group) information. | |
| U32 clusServerIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.1 | Unsigned32 | not-accessible | The index for the clusServerTable table. |
| STR clusServerName | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.2 | DisplayString | read-only | The server (authorization group) name. |
| STR clusServerDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.3 | DisplayString | read-only | The description of the server (authorization group). |
| T/F clusServerIscsiEnabled | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.22 | TruthValue | read-only | True if iSCSI is enabled, false otherwise. |
| T/F clusServerIscsiChapAuthRequired | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.23 | TruthValue | read-only | The iSCSI server only accepts initiators with the specified chap name if true. |
| G32 clusServerIscsiInitiatorCount | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.25 | Gauge32 | read-only | The count of iSCSI CHAP names required for the server (authorization group). |
| G32 clusServerVolumeACLCount | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.30 | Gauge32 | read-only | The number of volume ACLs in the Volume List. |
| ROW clusServerRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.105.1.99 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusServerSubnetTable | 1.3.6.1.4.1.9804.3.1.1.2.12.106 | not-accessible | A table of subnets for a particular sevrer (authorization group). The number of entries is given by clusServerMaskCount. | |
| clusServerSubnetEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.106.1 | not-accessible | A row of subnet information for an server (authorization group). | |
| U32 clusServerSubnetIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.106.1.1 | Unsigned32 | not-accessible | The index for the clusServerSubnetTable table. |
| IP clusServerSubnetAddress | 1.3.6.1.4.1.9804.3.1.1.2.12.106.1.2 | IpAddress | read-only | The address portion of the subnet. |
| IP clusServerSubnetMask | 1.3.6.1.4.1.9804.3.1.1.2.12.106.1.3 | IpAddress | read-only | The netmask portion of the subnet. |
| ROW clusServerSubnetRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.106.1.4 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusServerIscsiInitiatorTable | 1.3.6.1.4.1.9804.3.1.1.2.12.107 | not-accessible | A table of iSCSI hosts for a particular server (authorization group). The number of entries is given by clusServerIscsiInitiatorCount. | |
| clusServerIscsiInitiatorEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.107.1 | not-accessible | A row of iSCSI initiators for an server (authorization group). | |
| U32 clusServerIscsiInitiatorIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.107.1.1 | Unsigned32 | not-accessible | The index for the clusServerIscsiInitiatorTable table. |
| STR clusServerIscsiInitiatorIqn | 1.3.6.1.4.1.9804.3.1.1.2.12.107.1.5 | DisplayString | read-only | The iSCSI IQN for initiator. |
| STR clusServerIscsiInitiatorChapName | 1.3.6.1.4.1.9804.3.1.1.2.12.107.1.6 | DisplayString | read-only | The iSCSI initiator CHAP name. |
| ROW clusServerIscsiInitiatorRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.107.1.7 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| INT clusCommunicationMode | 1.3.6.1.4.1.9804.3.1.1.2.12.109 | INTEGER | read-only | The cluster communication mode. |
| I32 clusUnicastHostCount | 1.3.6.1.4.1.9804.3.1.1.2.12.110 | Integer32 | read-only | The number of hosts that are unicast communication. These hosts must be running a manager. |
| clusUnicastHostTable | 1.3.6.1.4.1.9804.3.1.1.2.12.111 | not-accessible | A table of hosts using unicast communication. The number of entries is given by clusUnicastHostCount. | |
| clusUnicastHostEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.111.1 | not-accessible | A row of unicast host information. | |
| U32 clusUnicastHostIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.111.1.1 | Unsigned32 | not-accessible | The index for the clusUnicastHostTable table. |
| STR clusUnicastHostName | 1.3.6.1.4.1.9804.3.1.1.2.12.111.1.2 | DisplayString | read-only | The IP address used for unicast communications used by the manager. |
| ROW clusUnicastHostRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.111.1.3 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| I32 clusSnapshotScheduleCount | 1.3.6.1.4.1.9804.3.1.1.2.12.112 | Integer32 | read-only | The number of snapshot schedules in the cluster. |
| clusSnapshotScheduleTable | 1.3.6.1.4.1.9804.3.1.1.2.12.113 | not-accessible | A table of snapshot schedules entries. The number of entries is given by clusSnapshotScheduleCount. | |
| clusSnapshotScheduleEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1 | not-accessible | A row of snapshot schdule information. | |
| U32 clusSnapshotScheduleIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.1 | Unsigned32 | not-accessible | The index for the clusSnapshotScheduleTable table. |
| STR clusSnapshotScheduleName | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.2 | DisplayString | read-only | The snapshot schedule name. |
| STR clusSnapshotScheduleDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.3 | DisplayString | read-only | The snapshot schedule description. |
| NUM clusSnapshotScheduleSoftThreshold | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.4 | CounterBasedGauge64 | read-only | The snapshot soft threshold. |
| NUM clusSnapshotScheduleHardThreshold | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.5 | CounterBasedGauge64 | read-only | The snapshot hard threshold. |
| DAT clusSnapshotScheduleFirstCreationTime | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.6 | DateAndTime | read-only | The first snapshot creation time. |
| G32 clusSnapshotScheduleFrequency | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.7 | Gauge32 | read-only | The snapshot frequency. |
| STR clusSnapshotScheduleVolumeName | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.8 | DisplayString | read-only | The name of the volume from which to create snapshots. |
| INT clusSnapshotScheduleRetainType | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.9 | INTEGER | read-only | The retention method. |
| G32 clusSnapshotScheduleRetainCount | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.10 | Gauge32 | read-only | The number of snapshot to retain. 0 if clusSnapshotScheduleRetainType is byTime(1). |
| G32 clusSnapshotScheduleRetainTime | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.11 | Gauge32 | read-only | The duration to retain the snapshot for. 0 if clusSnapshotScheduleRetainType is byNumber(2). |
| INT clusSnapshotScheduleType | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.13 | INTEGER | read-only | The snapshot schedule type. normal(1) - without remote snapshot primary(2) - the original in a remote snapshot remote(3) - remote snapshot |
| STR clusSnapshotScheduleFailureMessage | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.14 | DisplayString | read-only | A message indicating why snapshot failed. Empty if there are no errors. |
| ROW clusSnapshotScheduleRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.113.1.15 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| I32 clusMgmtGroupSiteCount | 1.3.6.1.4.1.9804.3.1.1.2.12.118 | Integer32 | read-only | The number of sites in the management group. |
| clusSiteTable | 1.3.6.1.4.1.9804.3.1.1.2.12.119 | not-accessible | A table of sites for a management group. The number of entries is given by clusMgmtGroupSiteCount. This is only used for Mult-Site clusters. | |
| clusSiteEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1 | not-accessible | A row of site information. | |
| U32 clusSiteIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.1 | Unsigned32 | not-accessible | The index for the clusSiteTable table. |
| STR clusSiteName | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.2 | DisplayString | read-only | The site name. This is only used for Mult-Site clusters. |
| STR clusSiteDescription | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.3 | DisplayString | read-only | The site description. This is only used for Mult-Site clusters. |
| T/F clusSiteIsPrimary | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.4 | TruthValue | read-only | True if site is primary, false otherwise. This is only used for Mult-Site clusters. |
| STR clusSiteFailoverManager | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.5 | DisplayString | read-only | The name of the failover manager if any exists. This is only used for Mult-Site clusters. |
| G32 clusSiteModuleCount | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.6 | Gauge32 | read-only | The number of storage modules in the site. This is only used for Mult-Site clusters. |
| ROW clusSiteRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.119.1.7 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusSiteModuleTable | 1.3.6.1.4.1.9804.3.1.1.2.12.120 | not-accessible | A table of module entries for each site. The number of entries is given by clusSiteModuleCount. | |
| clusSiteModuleEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.120.1 | not-accessible | A row of storage module information for a site. | |
| U32 clusSiteModuleIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.120.1.1 | Unsigned32 | not-accessible | The index for the clusSiteModuleTable table. |
| STR clusSiteModuleName | 1.3.6.1.4.1.9804.3.1.1.2.12.120.1.2 | DisplayString | read-only | The name of module. |
| ROW clusSiteModuleRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.120.1.3 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
| clusServerVolumeACLTable | 1.3.6.1.4.1.9804.3.1.1.2.12.121 | not-accessible | A table of ACL entries for each volume list. The number of entries is given by clusServerVolumeACLCount. | |
| clusServerVolumeACLEntry | 1.3.6.1.4.1.9804.3.1.1.2.12.121.1 | not-accessible | A row of authorization and permissions for a volume list. | |
| U32 clusServerVolumeACLIndex | 1.3.6.1.4.1.9804.3.1.1.2.12.121.1.1 | Unsigned32 | not-accessible | The index for the clusServerVolumeACLTable table. |
| STR clusServerVolumeACLVolume | 1.3.6.1.4.1.9804.3.1.1.2.12.121.1.2 | DisplayString | read-only | The volume containing this ACL. |
| CLU clusServerVolumeACLPermissions | 1.3.6.1.4.1.9804.3.1.1.2.12.121.1.3 | ClusPermissionBits | read-only | The permissions bits. |
| ROW clusServerVolumeACLRowStatus | 1.3.6.1.4.1.9804.3.1.1.2.12.121.1.5 | RowStatus | read-only | The table row status. Obsolete in SAN/iQ 8.5. |
RFC description
Vendor-private MIB for LeftHand Networks NSM (Network Storage Management) clustering configuration and monitoring.
Start monitoring HP StorageWorks P4000 SAN storage node (LeftHand SAN/iQ clustering) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.