| OID symbolic | OID numeric | Type | Access | Description |
|---|
| cjnLrrp | 1.3.6.1.4.1.1751.2.43.2.19 | | | Cajun's Lucent Router Redundancy Protocol MIB |
| cjnLrrpGlobalGroup | 1.3.6.1.4.1.1751.2.43.2.19.1 | | | |
| INT cjnLrrpEnabled | 1.3.6.1.4.1.1751.2.43.2.19.1.1 | INTEGER | read-write | Enable / Disable LRRP on this system. |
| INT cjnLrrpGlobalStatsReset | 1.3.6.1.4.1.1751.2.43.2.19.1.2 | INTEGER | read-write | When set to the value enable (1) all VRRP statistics are
reset to zero after which the value of this MIB
object returns to disable(2) |
| cjnLrrpGblStatsGroup | 1.3.6.1.4.1.1751.2.43.2.19.2 | | | |
| I32 cjnLrrpRouterChecksumErrors | 1.3.6.1.4.1.1751.2.43.2.19.2.1 | Integer32 | read-write | The total number of LRRP packets received with an invalid
LRRP checksum value. |
| I32 cjnLrrpRouterVersionErrors | 1.3.6.1.4.1.1751.2.43.2.19.2.2 | Integer32 | read-write | The total number of LRRP packets received with an unknown
or unsupported version number. |
| I32 cjnLrrpRouterVrIdErrors | 1.3.6.1.4.1.1751.2.43.2.19.2.3 | Integer32 | read-write | The total number of LRRP packets received with an invalid
VRID for this virtual router. |
| cjnLrrpRtrStatsGroup | 1.3.6.1.4.1.1751.2.43.2.19.3 | | | |
| cjnLrrpRouterStatsTable | 1.3.6.1.4.1.1751.2.43.2.19.3.1 | | not-accessible | Table of virtual router statistics. |
| cjnLrrpRouterStatsEntry | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1 | | not-accessible | An entry in the table, containing statistics information
about a given virtual router. |
| I32 cjnLrrpStatsBecomeMaster | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.1 | Integer32 | read-write | The total number of times that this virtual router's state
has transitioned to MASTER. |
| I32 cjnLrrpStatsAdvertiseRcvd | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.2 | Integer32 | read-write | The total number of LRRP advertisements received by this
virtual router. |
| I32 cjnLrrpStatsAdvertiseIntervalErrors | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.6 | Integer32 | read-write | The total number of LRRP advertisement packets received
for which the advertisement interval is different than the
one configured for the local virtual router. |
| I32 cjnLrrpStatsAuthFailures | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.7 | Integer32 | read-write | The total number of LRRP packets received that do not pass
the authentication check. |
| I32 cjnLrrpStatsIpTtlErrors | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.8 | Integer32 | read-write | The total number of LRRP packets received by the virtual
router with IP TTL (Time-To-Live) not equal to 255. |
| I32 cjnLrrpStatsPriorityZeroPktsRcvd | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.9 | Integer32 | read-write | The total number of LRRP packets received by the virtual
router with a priority of '0'. |
| I32 cjnLrrpStatsPriorityZeroPktsSent | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.10 | Integer32 | read-write | The total number of LRRP packets sent by the virtual router
with a priority of '0'. |
| I32 cjnLrrpStatsInvalidTypePktsRcvd | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.11 | Integer32 | read-write | The number of LRRP packets received by the virtual router
with an invalid value in the 'type' field. |
| I32 cjnLrrpStatsAddressListErrors | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.12 | Integer32 | read-write | The total number of packets received for which the address
list does not match the locally configured list for the
virtual router. |
| I32 cjnLrrpStatsInvalidAuthType | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.13 | Integer32 | read-write | The total number of packets received with an unknown
authentication type. |
| I32 cjnLrrpStatsAuthTypeMismatch | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.14 | Integer32 | read-write | The total number of packets received with 'Auth Type' not
equal to the locally configured authentication method
(`cjnLrrpOperAuthType'). |
| I32 cjnLrrpStatsPacketLengthErrors | 1.3.6.1.4.1.1751.2.43.2.19.3.1.1.15 | Integer32 | read-write | The total number of packets received with a packet length
less than the length of the LRRP header. |
| cjnLrrpRtrGroup | 1.3.6.1.4.1.1751.2.43.2.19.4 | | | |
| cjnLrrpOperTable | 1.3.6.1.4.1.1751.2.43.2.19.4.1 | | not-accessible | Operations table for a LRRP router which consists of a
sequence (i.e., one or more conceptual rows) of
'cjnLrrpOperEntry' items. |
| cjnLrrpOperEntry | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1 | | not-accessible | An entry in the cjnLrrpOperTable containing the operational
characteristics of a virtual router. On a LRRP router,
a given virtual router is identified by a combination
of the IF index and VRID.
Rows in the table cannot be modified unless the value
of `cjnLrrpOperAdminState' is `disabled' and the
`cjnLrrpOperState' has transitioned to `initialize'. |
| I32 cjnLrrpOperVrId | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.1 | Integer32 | read-only | This object contains the Virtual Router Identifier (VRID). |
| MAC cjnLrrpOperVirtualMacAddr | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.2 | MacAddress | read-only | The virtual MAC address of the virtual router. This is derived
as follows: 00-00-5E-00-01-.
Where the first three octets consist of the IANA's OUI; The
next two octets indicate the address block of the LRRP protocol;
and the remaining octets consist of the VRID.
Although this object can be derived from the 'LRRPOperVrId'
object, it is included here, for completeness, so that it
is easily obtainable by a management application and can be
included in LRRP-related SNMP traps. |
| INT cjnLrrpOperState | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.3 | INTEGER | read-only | The current state of the virtual router. This object has
three defined values:
- `initialize', which indicates that all the
virtual router is waiting for a startup event.
- `backup', which indicates the virtual router is
monitoring the availability of the master router.
- `master', which indicates that the virtual router
is forwarding packets for IP addresses that are
associated with this router.
Setting the `cjnLrrpOperAdminState' object (below) initiates
transitions in the value of this object. |
| INT cjnLrrpOperAdminState | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.4 | INTEGER | read-create | This object will enable/disable the virtual router
function. Setting the value to 'up', will transition
the state of the virtual router from `initialize' to `backup'
or `master'; setting the value to `down', will transition
the router from `master' or `backup' to `initialize'. State
transitions may not be immediate; they sometimes depend on
other factors, such as the interface (IF) state.
The `cjnLrrpOperAdminState' object must be set to `down' prior
to modifying the other read-create objects in the conceptual
row. The value of the `cjnLrrpOperRowStatus' object (below)
must be `active', signifying that the conceptual row
is valid (i.e., the objects are correctly set),
in order for this object to be set to `up'. |
| I32 cjnLrrpOperPriority | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.5 | Integer32 | read-create | This object specifies the priority to be used for the
virtual router master election process. Higher values imply
higher priority.
A priority of '0', although not settable, is sent by
the master router to indicate that this router has ceased
to particpate in LRRP and a backup virtual router should
transition to become a new master.
A priority of 255 is used for the router that owns the
associated IP address(es). |
| I32 cjnLrrpOperIpAddrCount | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.6 | Integer32 | read-only | The number of IP addresses that are associated with this
virtual router. This number is equal to the number of rows
in the cjnLrrpAssoIpAddrTable that correspond to a given IF
index/VRID pair. |
| IP cjnLrrpOperMasterIpAddr | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.7 | IpAddress | read-only | The master router's real (primary) IP address. This is
the IP address listed as the source in LRRP advertisement
last received by this virtual router. |
| IP cjnLrrpOperPrimaryIpAddr | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.8 | IpAddress | read-create | In the case where there is more than one IP address for
a given `ifIndex', this object is used to specify the IP
address that will become the `cjnLrrpOperMasterIpAddr', should
the virtual router transition from backup to master. If
this object is set to 0.0.0.0, the IP address which is
numerically lowest will be selected. |
| INT cjnLrrpOperAuthType | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.9 | INTEGER | read-create | Authentication type used for LRRP protocol exchanges between
virtual routers. This value of this object is the same for a
given ifIndex. |
| OCT cjnLrrpOperAuthKey | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.10 | OCTET STRING | read-create | The Authentication Key. This object is set according to
the value of the 'cjnLrrpOperAuthType' object
('simpleTextPassword' or 'ipAuthenticationHeader'). If the
length of the value is less than 16 octets, the agent will
left adjust and zero fill to 16 octets. The value of this
object is the same for a given ifIndex.
When read, cjnLrrpOperAuthKey always returns an Octet String
of length zero. |
| I32 cjnLrrpOperAdvertisementInterval | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.11 | Integer32 | read-create | The time interval, in seconds, between sending
advertisement messages. Only the master router sends
LRRP advertisements. |
| T/F cjnLrrpOperPreemptMode | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.12 | TruthValue | read-create | Controls whether a higher priority virtual router will
preempt a lower priority master. |
| TIM cjnLrrpOperVirtualRouterUpTime | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.13 | TimeStamp | read-only | This is the value of the `sysUpTime' object when this
virtual router (i.e., the `cjnLrrpOperState') transitioned
out of `initialized'. |
| INT cjnLrrpOperProtocol | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.14 | INTEGER | read-create | The particular protocol being controlled by this Virtual
Router. |
| INT cjnLrrpOperOverrideAddressOwner | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.15 | INTEGER | read-write | Enable/Disable LRRP override IP address owner on this system. When set to true (1), this system will
respond to ping requests, telnet requests, etc., for all configured virtual IP addresses when this
system is in MASTER VRRP state. |
| ROW cjnLrrpOperRowStatus | 1.3.6.1.4.1.1751.2.43.2.19.4.1.1.16 | RowStatus | read-create | The row status variable, used in accordance to installation
and removal conventions for conceptual rows. In the text
that follows, the characteristics (i.e., whether readable,
settable or both) of each value are indicated in parenthesis.
The state that this object transitions to when it is set
is based on a determination of whether the read-create
objects in the row have been correctly initialized for
virtual router operation. A row in which not all of the
objects are correctly set is considered `incomplete'.
The rowstatus of a currently active row in the cjnLrrpOperTable
is also constrained by the operational state of the
corresponding virtual router. Prior to setting this object
from `active' to a different value, the `cjnLrrpOperAdminState'
object must be set to `down', and the `cjnLrrpOperState' object
be transitioned to `initialize'.
The rowstatus column has six defined values:
- `active' (read/set). When this value is read, it
indicates that all the read-create objects (in the row)
required for virtual router operation have been
correctly initialized such that the respective virtual
router can be made operational by setting the
`cjnLrrpOperAdminState' to `up'. When set to `active',
no other objects in the conceptual row, with the
exception of `cjnLrrpOperAdminState', can be modified.
When set, the agent will transition the value of
rowstatus to `notReady' if the row is incomplete.
- `notInService' (read/set), which when set, allows the
objects in the row to be modified by a management station,
thus changing the operational characteristics of the
corresponding virtual router.
- `notReady' (read). The agent sets the object to this
state to indicate that the conceptual row exists,
but is lacking initialization of one or more objects
required for virtual router operation.
- `createAndGo' (set), which is set by a management
station wishing to create a new instance of a
virtual router and to have its status automatically
set to `active', making it available for use by a
virtual router. Upon receiving a request to set the
rowstatus to this value, the agent transitions the
rowstatus to `active' if the other settable objects
in the row have been correctly initialized. If the
row is incomplete, the agent transitions the state to
`notReady'.
- `createAndWait' (set), which is set by a management
station wishing to create a new instance of a
virtual router but not make it available for use.
When this value is set, rowstatus transitions to
`notInService' if the row has been correctly
initialized; if the row is incomplete, rowstatus will
become `notReady'.
- `destroy' (set), which deletes the conceptual row,
and hence, the corresponding instance of a virtual
router. |
| cjnLrrpAssoIpAddrGroup | 1.3.6.1.4.1.1751.2.43.2.19.5 | | | |
| cjnLrrpAssoIpAddrTable | 1.3.6.1.4.1.1751.2.43.2.19.5.1 | | not-accessible | The table of addresses associated with this virtual router. |
| cjnLrrpAssoIpAddrEntry | 1.3.6.1.4.1.1751.2.43.2.19.5.1.1 | | not-accessible | An entry in the table contains an IP address that is
associated with a virtual router. The number of rows for
a given ifIndex and VrId will equal the number of IP
addresses associated (e.g., backed up) by the virtual
router (equivalent to 'cjnLrrpOperIpAddrCount').
Rows in the table cannot be modified unless the value
of `cjnLrrpOperAdminState' is `disabled' and the
`cjnLrrpOperState' has transitioned to `initialize'. |
| IP cjnLrrpAssoIpAddr | 1.3.6.1.4.1.1751.2.43.2.19.5.1.1.1 | IpAddress | read-only | The assigned IP addresses that a virtual router is
responsible for backing up. |
| ROW cjnLrrpAssoIpAddrRowStatus | 1.3.6.1.4.1.1751.2.43.2.19.5.1.1.2 | RowStatus | read-create | The row status variable, used according to installation
and removal conventions for conceptual rows. Setting this
object to `active' or 'createAndGo' results in the addition
of an associated address for a virtual router. Destroying
the entry or setting it to 'notInService' removes the
associated address from the virtual router. The use of
other values is implementation-dependent. |
