HPN-ICF-EPON-FB-MIB

All MIBs › HPN-ICF-EPON-FB-MIB

Last Updated: 2007-11-27

Category: Technology: EPON/PON, Technology: High Availability, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages EPON fiber backup (FB) protection switching and redundancy on HP/Comware optical access equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-EPON-FB-MIB?

HPN-ICF-EPON-FB-MIB is an HP/H3C Comware proprietary MIB configuring fiber-backup groups on EPON OLT ports, a redundancy feature protecting a PON fiber link with a standby master/slave port pair. Its group table, keyed by group index, records row status, master and slave port assignments, the operational status of each, and a manual switchover trigger. As a configuration/hardware-status MIB it lets an administrator confirm a fiber-backup group's master port is currently active and manually trigger a switchover if the master link degrades. It is deployed on HP/H3C Comware EPON OLT platforms with fiber-backup redundancy. Engineers can download the HPN-ICF-EPON-FB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-EPON-FB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware EPON OLT platforms

Monitoring Examples

An administrator checks hpnicfEponFBMasterPortStatus for a fiber-backup group reporting degraded service, and triggers hpnicfEponFBSwitchover to fail over to the slave port if the master fiber is suspected of a fault.

What Can Be Monitored

fiber-backup group master/slave port status

Imported Objects

From HPN-ICF-OID-MIB

hpnicfEpon

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfEponFBMibObjects	1.3.6.1.4.1.11.2.14.11.15.2.42.6			The objects in this MIB module are used to manage and display current configuration of fiber backup groups based on EPON OLT port.
hpnicfEponFBMIB	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1
hpnicfEponFBMIBTable	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1		not-accessible	This table defines several optical fiber-backup system parameters.
hpnicfEponFBMIBEntry	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1		not-accessible	The entry of hpnicfEponFBMIBTable.
I32 hpnicfEponFBGroupIndex	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.1	Integer32	not-accessible	The EPON fiber-backup group ID.
ROW hpnicfEponFBGroupRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.2	RowStatus	read-create	This object allows entry to be created and deleted from the hpnicfEponFBMIBTable.
I32 hpnicfEponFBMasterPort	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.3	Integer32	read-create	OLT port ifindex of the fiber-backup group. Use it to set or get the group master port.
I32 hpnicfEponFBSlavePort	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.4	Integer32	read-create	OLT port ifindex of the fiber-backup group. Use it to set or get the group slave port. hpnicfEponFBSlavePort must be set after hpnicfEponFBMasterPort.
INT hpnicfEponFBMasterPortStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.5	INTEGER	read-only	The master port status of the fiber-backup group. The active state indicates that the port's role is master, the olt chip is right and the optical module is inserted. The down state indicates others conditions.
INT hpnicfEponFBSlavePortStatus	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.6	INTEGER	read-only	The slave port status of the fiber-backup group. The ready state indicates that the port's role is slave, the olt chip is right and optical module is inserted. The down state indicates others conditions.
INT hpnicfEponFBSwitchover	1.3.6.1.4.1.11.2.14.11.15.2.42.6.1.1.1.7	INTEGER	read-create	Switch the fiber backup group's two port manually. The group must has two ports and the value of hpnicfEponFBSlavePortStatus must be ready before Switchover. after Switchover the port's role will be changed. The value true is for switch-over. The default value is false.

RFC description

Hewlett-Packard vendor MIB for managing EPON (Ethernet Passive Optical Network) fiber backup group configuration on OLT ports.

Start monitoring HP/H3C Comware EPON OLT platform (fiber-backup redundancy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-EPON-FB-MIB

What Is HPN-ICF-EPON-FB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description