HUAWEI-VGMP-MIB

All MIBs › HUAWEI-VGMP-MIB

Organization: Huawei Technologies co., Ltd.

Last Updated: 2007-01-11

Category: Domain: Security, Protocol: VRRP, Technology: High Availability, Vendor: Huawei

Description: Huawei VGMP (VRRP Group Management Protocol) MIB for managing synchronized VRRP group failover on Huawei firewalls.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-VGMP-MIB?

HUAWEI-VGMP-MIB is a Huawei enterprise MIB for VRRP Group Management Protocol (VGMP), a Huawei extension used mainly on firewalls to synchronize the failover state of multiple VRRP groups together so that all traffic for a redundant pair switches over as one coordinated unit rather than group-by-group. It exposes status and configuration objects reflecting VGMP group membership and the current active/standby state of the synchronized group set. Its monitoring value is centered on high-availability software state: confirming which unit in an active/standby firewall or router pair currently holds the active role, and detecting unexpected or flapping state transitions that could indicate a failover problem. It depends conceptually on standard VRRP (RFC 3768) and extends it with Huawei-specific group synchronization semantics. Deployment context is Huawei firewalls or routers deployed in active/standby high-availability pairs, commonly at network edges or data center gateways. Engineers can download the HUAWEI-VGMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-VGMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei firewall
Huawei router in HA pair

Monitoring Examples

An administrator would poll the VGMP group state object to confirm which device in an HA pair is currently Active versus Standby, and an unexpected or repeated state transition would reveal a failover event or instability in the synchronized VRRP group set, prompting investigation into the HA link or underlying VRRP groups.

What Can Be Monitored

VGMP group active/standby state
VRRP group synchronization status
failover state transitions

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwVgmpMib	1.3.6.1.4.1.2011.5.25.122			This mib is used for VGMP.
vgmpGlobalCtrl	1.3.6.1.4.1.2011.5.25.122.0
INT hwVgmpTrapSnmpCtrl	1.3.6.1.4.1.2011.5.25.122.0.1	INTEGER	read-write	A switch decides whether the system sends trap info or not.
INT hwVgmpStrictCheck	1.3.6.1.4.1.2011.5.25.122.0.2	INTEGER	read-write	A switch decides whether the system carries out strict check or not.
vgmpNotifications	1.3.6.1.4.1.2011.5.25.122.1
NTF hwVgmpOtherStateToMaster	1.3.6.1.4.1.2011.5.25.122.1.1			The status of the vrrp-group turns to master.
NTF hwVgmpMasterToOtherState	1.3.6.1.4.1.2011.5.25.122.1.2			The status of the vrrp-group changes from master to other state.
vgmpOperations	1.3.6.1.4.1.2011.5.25.122.2
hwVgmpGroupCfgTable	1.3.6.1.4.1.2011.5.25.122.2.1		not-accessible	The vrrp-group configuration table.
hwVgmpGroupCfgEntry	1.3.6.1.4.1.2011.5.25.122.2.1.1		not-accessible	An entry in the vrrp-group configuration table.
I32 hwVgmpGroupCfgID	1.3.6.1.4.1.2011.5.25.122.2.1.1.1	Integer32	not-accessible	The vrrp-group ID.
INT hwVgmpGroupCfgEnable	1.3.6.1.4.1.2011.5.25.122.2.1.1.2	INTEGER	read-create	Whether to enable vrrp-group or not.
I32 hwVgmpGroupCfgPri	1.3.6.1.4.1.2011.5.25.122.2.1.1.3	Integer32	read-create	The priority of the vrrp-group. This attribute cannot be configured if attribute 'hwVgmpGroupCfgUseVrrpPri' is set to 'enable'.
INT hwVgmpGroupCfgUseVrrpPri	1.3.6.1.4.1.2011.5.25.122.2.1.1.4	INTEGER	read-create	Whether using vrrp priority compute vrrp-group priority or not. This attribute is exclusive with attributes 'hwVgmpGroupCfgPri' and 'hwVgmpGroupCfgPriPlusValue', so it is suggested not to configure this attribute together with 'hwVgmpGroupCfgPri' or 'hwVgmpGroupCfgPriPlusValue'. '.
I32 hwVgmpGroupCfgPriPlusValue	1.3.6.1.4.1.2011.5.25.122.2.1.1.5	Integer32	read-create	The plus priority value after an interface added into a group. This attribute cannot be configured if attribute 'hwVgmpGroupCfgUseVrrpPri' is set to 'enable'.
INT hwVgmpGroupCfgPreemptEnable	1.3.6.1.4.1.2011.5.25.122.2.1.1.6	INTEGER	read-create	Whether to enable preempt switch or not.
I32 hwVgmpGroupCfgPreemptDelayValue	1.3.6.1.4.1.2011.5.25.122.2.1.1.7	Integer32	read-create	The delaying time of vrrp-group enters into new master state.
I32 hwVgmpGroupCfgHelloInterval	1.3.6.1.4.1.2011.5.25.122.2.1.1.8	Integer32	read-create	The interval for the vrrp-group to send vgmp hello packets.
INT hwVgmpGroupCfgSendEnable	1.3.6.1.4.1.2011.5.25.122.2.1.1.9	INTEGER	read-create	Whether to enable vrrp-group group-send or not.
INT hwVgmpGroupCfgState	1.3.6.1.4.1.2011.5.25.122.2.1.1.10	INTEGER	read-only	The state of the vrrp-group.
I32 hwVgmpGroupCfgRunPri	1.3.6.1.4.1.2011.5.25.122.2.1.1.11	Integer32	read-only	The vrrp-group current run priority, it is different from hwVgmpGroupCfgPri. The value calculates according as configured priority attribute.
U32 hwVgmpGroupCfgCreateTime	1.3.6.1.4.1.2011.5.25.122.2.1.1.12	Unsigned32	read-only	A span of the current time subtract the vrrp-group create time. This attribute is expressed as second.
U32 hwVgmpGroupCfgLastChangeTime	1.3.6.1.4.1.2011.5.25.122.2.1.1.13	Unsigned32	read-only	A span of the current time subtract the vrrp-group last change time. This attribute is expressed as second.
INT hwVgmpGroupCfgPeerState	1.3.6.1.4.1.2011.5.25.122.2.1.1.14	INTEGER	read-only	The vrrp-group peer state.
I32 hwVgmpGroupCfgVrrpNum	1.3.6.1.4.1.2011.5.25.122.2.1.1.15	Integer32	read-only	The vrrp-group member number.
INT hwVgmpGroupCfgReset	1.3.6.1.4.1.2011.5.25.122.2.1.1.16	INTEGER	read-create	A reset sign of vrrp-group statistics.
ROW hwVgmpGroupCfgOperRowStatus	1.3.6.1.4.1.2011.5.25.122.2.1.1.17	RowStatus	read-create	The row status variable.
INT hwVgmpGroupCfgNextState	1.3.6.1.4.1.2011.5.25.122.2.1.1.18	INTEGER	read-only	The next state of vrrp-Group. It provides for trap matching, you can get only unknown state.
hwVgmpMemberTable	1.3.6.1.4.1.2011.5.25.122.2.2		not-accessible	The vrrp-group member configuration table.
hwVgmpMemberEntry	1.3.6.1.4.1.2011.5.25.122.2.2.1		not-accessible	An entry in the vrrp-group member configuration table.
NUM hwVgmpMemberIfIndex	1.3.6.1.4.1.2011.5.25.122.2.2.1.1	InterfaceIndex	not-accessible	The index of the member table.
I32 hwVgmpMemberVRID	1.3.6.1.4.1.2011.5.25.122.2.2.1.2	Integer32	not-accessible	The vrrp-group member's vitual router id.
INT hwVgmpMemberData	1.3.6.1.4.1.2011.5.25.122.2.2.1.3	INTEGER	read-create	It specifies the vrrp-group member's attributes. 'enable' indicates this is the vgmp data channel.
INT hwVgmpMemberTran	1.3.6.1.4.1.2011.5.25.122.2.2.1.4	INTEGER	read-create	It identifiers a vrrp-group member's attribute, 'enable' indicates this is the vgmp data transfer-only channel. This attribute cannot be configured if attribute 'hwVgmpMemberData' is set to 'disable'.
INT hwVgmpMemberVrrpOnline	1.3.6.1.4.1.2011.5.25.122.2.2.1.5	INTEGER	read-only	The vrrp-group member's peer state.
ROW hwVgmpMemberOperRowStatus	1.3.6.1.4.1.2011.5.25.122.2.2.1.6	RowStatus	read-create	The row status variable.
hwVgmpTrackBFDTable	1.3.6.1.4.1.2011.5.25.122.2.3		not-accessible	The vrrp-group tracking BFD session table.
hwVgmpTrackBFDEntry	1.3.6.1.4.1.2011.5.25.122.2.3.1		not-accessible	An entry in the vrrp-group tracking BFD session table.
I32 hwVgmpTrackBFDID	1.3.6.1.4.1.2011.5.25.122.2.3.1.1	Integer32	not-accessible	The session id of vrrp-group tracking BFD.
I32 hwVgmpTrackBFDReduceValue	1.3.6.1.4.1.2011.5.25.122.2.3.1.2	Integer32	read-create	The value which the system will subtract from priority, when a bfd session is down. You can't set zero.
INT hwVgmpTrackBFDPreeEnable	1.3.6.1.4.1.2011.5.25.122.2.3.1.3	INTEGER	read-create	Whether to enable track BFD slave preempt.
ROW hwVgmpTrackBFDOperRowStatus	1.3.6.1.4.1.2011.5.25.122.2.3.1.4	RowStatus	read-create	The row status variable.
vgmpStatistics	1.3.6.1.4.1.2011.5.25.122.3
hwVgmpStatisticTable	1.3.6.1.4.1.2011.5.25.122.3.1		not-accessible	The packets statistic information table.
hwVgmpStatisticEntry	1.3.6.1.4.1.2011.5.25.122.3.1.1		not-accessible	An entry in the packets statistic information table.
I32 hwVgmpStatisticCheckFailDropNum	1.3.6.1.4.1.2011.5.25.122.3.1.1.1	Integer32	read-only	The number of dropped packets due to check failure.
I32 hwVgmpStatisticDisableDropNum	1.3.6.1.4.1.2011.5.25.122.3.1.1.2	Integer32	read-only	The number of dropped packets because the vrrp-group is disabled.
I32 hwVgmpStatisticModeTypeErrDropNum	1.3.6.1.4.1.2011.5.25.122.3.1.1.3	Integer32	read-only	The number of dropped packets because the vrrp-group mode or type is wrong.
I32 hwVgmpStatisticAccHelloREQ	1.3.6.1.4.1.2011.5.25.122.3.1.1.4	Integer32	read-only	The number of hello REQ packets received by the vrrp-group.
I32 hwVgmpStatisticSendHelloREQ	1.3.6.1.4.1.2011.5.25.122.3.1.1.5	Integer32	read-only	The number of hello REQ packets sent by the vrrp-group.
I32 hwVgmpStatisticAccHelloACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.6	Integer32	read-only	The number of hello ACK packets received by the vrrp-group.
I32 hwVgmpStatisticSendHelloACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.7	Integer32	read-only	The vrrp-group sending hello ACK packets num.
I32 hwVgmpStatisticAccMasterToSlaveREQ	1.3.6.1.4.1.2011.5.25.122.3.1.1.8	Integer32	read-only	The number of MasterToSlave REQ packets received by the vrrp-group.
I32 hwVgmpStatisticSendMasterToSlaveREQ	1.3.6.1.4.1.2011.5.25.122.3.1.1.9	Integer32	read-only	The number of MasterToSlave REQ packets sent by the vrrp-group.
I32 hwVgmpStatisticAccMasterToSlaveACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.10	Integer32	read-only	The number of MasterToSlave ACK packets received by the vrrp-group.
I32 hwVgmpStatisticSendMasterToSlaveACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.11	Integer32	read-only	The number of MasterToSlave ACK packets sent by the vrrp-group.
I32 hwVgmpStatisticAccMasterToSlaveNACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.12	Integer32	read-only	The number of MasterToSlave NACK packets received by the vrrp-group.
I32 hwVgmpStatisticSendMasterToSlaveNACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.13	Integer32	read-only	The number of MasterToSlave NACK packets sent by the vrrp-group.
I32 hwVgmpStatisticAccSlaveToMasterREQ	1.3.6.1.4.1.2011.5.25.122.3.1.1.14	Integer32	read-only	The number of SlaveToMaster REQ packets received by the vrrp-group.
I32 hwVgmpStatisticSendSlaveToMasterREQ	1.3.6.1.4.1.2011.5.25.122.3.1.1.15	Integer32	read-only	The number of SlaveToMaster REQ packets sent by the vrrp-group.
I32 hwVgmpStatisticAccSlaveToMasterACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.16	Integer32	read-only	The number of SlaveToMaster ACK packets received by the vrrp-group.
I32 hwVgmpStatisticSendSlaveToMasterACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.17	Integer32	read-only	The number of SlaveToMaster ACK packets sent by the vrrp-group.
I32 hwVgmpStatisticAccSlaveToMasterNACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.18	Integer32	read-only	The number of SlaveToMaster NACK packets received by the vrrp-group.
I32 hwVgmpStatisticSendSlaveToMasterNACK	1.3.6.1.4.1.2011.5.25.122.3.1.1.19	Integer32	read-only	The number of SlaveToMaster NACK packets sent by the vrrp-group.
vgmpConformance	1.3.6.1.4.1.2011.5.25.122.4
hwVGMPMIBCompliances	1.3.6.1.4.1.2011.5.25.122.4.1
hwVGMPMIBGroups	1.3.6.1.4.1.2011.5.25.122.4.1.1
hwVGMPGroAttrGroup	1.3.6.1.4.1.2011.5.25.122.4.1.1.1			Attributes of the vrrp-group configuration.
hwVGMPMenAttrGroup	1.3.6.1.4.1.2011.5.25.122.4.1.1.2			The vrrp-group member table's atributes.
hwVGMPBFDSessionGroup	1.3.6.1.4.1.2011.5.25.122.4.1.1.3			The vrrp-group tracking BFD table's atributes.
hwVGMPStaticGroup	1.3.6.1.4.1.2011.5.25.122.4.1.1.4			The vrrp-group packet's statistic info.
hwVGMPGlobalsGroup	1.3.6.1.4.1.2011.5.25.122.4.1.1.5			The vrrp-group global group.
hwVGMPNotificationGroup	1.3.6.1.4.1.2011.5.25.122.4.1.1.6			The vrrp-group notification group.

RFC description

Manages VRRP Group Management Protocol for gateway redundancy on Huawei routers.

Start monitoring Huawei firewall or router in HA pair (VRRP Group Management Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-VGMP-MIB

What Is HUAWEI-VGMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description