HMTRACKING-SNMP-MIB

All MIBs › HMTRACKING-SNMP-MIB

Organization: Hirschmann Automation and Control GmbH

Last Updated: 2007-09-13

Category: Technology: High Availability, Vendor: Belden

Description: Hirschmann tracking SNMP MIB for interface and connectivity tracking used in redundancy and failover scenarios.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HMTRACKING-SNMP-MIB?

HMTRACKING-SNMP-MIB is a Hirschmann Automation and Control proprietary MIB implementing object tracking (e.g., interface link state or ICMP ping reachability, similar in concept to Cisco's IP SLA tracking) on Hirschmann industrial switches/routers. Its tracking table, keyed by ID, records type, state, number of state changes, time since last change, and, for interface-based tracking, link-up/down delay, or for ping-based tracking, target IP, interval, miss/success counts, timeout, TTL, and best-route interface, plus a logical-operator setting and a state-change-trap-send flag, alongside an application table and logical-instance table for combining multiple tracked objects. As a configuration/status MIB it lets an administrator confirm a tracked object's current state and recent change history, commonly used to drive automatic failover decisions. It is deployed on Hirschmann Automation and Control industrial network equipment. Engineers can download the HMTRACKING-SNMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HMTRACKING-SNMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hirschmann Automation and Control industrial network equipment

Monitoring Examples

An administrator checks hmTrackPingSuccess against hmTrackPingMiss for a tracked uplink to confirm reachability tracking is correctly detecting a degraded path before an automatic failover would trigger.

What Can Be Monitored

tracked object (link/ping) state and change history

Imported Objects

From HMPRIV-MGMT-SNMP-MIB

hmConfiguration

MODULE-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-IDENTITY
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hmTracking	1.3.6.1.4.1.248.14.15			The Hirschmann Private Tracking MIB definitions for Platform devices.
hmTrackingGroup	1.3.6.1.4.1.248.14.15.1
hmTrackEvent	1.3.6.1.4.1.248.14.15.1.0			The events of hmTrackEvent.
NTF hmTrackStatusChangeEvent	1.3.6.1.4.1.248.14.15.1.0.1			Sent when the state of a tracking instance changes between up and down.
hmTrackingTable	1.3.6.1.4.1.248.14.15.1.1		not-accessible	This table contains variables to define an entry in the Hirschmann Tracking database.
hmTrackingEntry	1.3.6.1.4.1.248.14.15.1.1.1		not-accessible	The entry of the hmTrackingTable.
I32 hmTrackId	1.3.6.1.4.1.248.14.15.1.1.1.1	Integer32	read-only	The id of an object being tracked.
ROW hmTrackRowStatus	1.3.6.1.4.1.248.14.15.1.1.1.2	RowStatus	read-create	Defines the status of the Tracking database entry. Set to createAndWait(5) to create a new row. Set to destroy(6) to delete an entry. Set to notInService(2) to change an entry. Reads as active(1) if the tracked object exists and is trackable, notReady(3) otherwise.
INT hmTrackType	1.3.6.1.4.1.248.14.15.1.1.1.3	INTEGER	read-write	The kind of an object being tracked.
INT hmTrackState	1.3.6.1.4.1.248.14.15.1.1.1.4	INTEGER	read-only	Shows if the tracked object is currently UP or DOWN.
I32 hmTrackNumberOfChanges	1.3.6.1.4.1.248.14.15.1.1.1.5	Integer32	read-only	The number of state changes after an object being tracked, entered its operational state. If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIK hmTrackTimeSinceLastChange	1.3.6.1.4.1.248.14.15.1.1.1.6	TimeTicks	read-only	The time difference to the last state change of an object being tracked (in hundredths of a second). If the current state was entered prior to the last re-initialization of the local network management subsystem, then this object contains a zero value.
NUM hmTrackIfNumber	1.3.6.1.4.1.248.14.15.1.1.1.7	InterfaceIndexOrZero	read-write	The number of the interface being tracked. The number of the interface to send ping packets. For ping objects the value 65535 is used to show that no valid interface number has been set. It cannot be written.
I32 hmTrackIfLinkUpDelay	1.3.6.1.4.1.248.14.15.1.1.1.8	Integer32	read-write	If a link-up recovers within this delay, the tracked object is not considered as up.
I32 hmTrackIfLinkDownDelay	1.3.6.1.4.1.248.14.15.1.1.1.9	Integer32	read-write	If a link-down recovers within this delay, the tracked object is not considered as down.
IP hmTrackPingIpAddress	1.3.6.1.4.1.248.14.15.1.1.1.10	IpAddress	read-write	The IP address of the router being monitored.
I32 hmTrackPingInterval	1.3.6.1.4.1.248.14.15.1.1.1.11	Integer32	read-write	The number of seconds between the pings to the target IP address.
I32 hmTrackPingMiss	1.3.6.1.4.1.248.14.15.1.1.1.12	Integer32	read-write	This specifies the number of consecutive ping misses until the tracked object is considered to be down.
I32 hmTrackPingSuccess	1.3.6.1.4.1.248.14.15.1.1.1.13	Integer32	read-write	This specifies the number of consecutive ping successes until the tracked object is considered to be up.
I32 hmTrackPingTimeout	1.3.6.1.4.1.248.14.15.1.1.1.14	Integer32	read-write	This specifies the timeout in milliseconds for a ping reply. After the timeout the ping reply is considered as lost.
I32 hmTrackPingTTL	1.3.6.1.4.1.248.14.15.1.1.1.15	Integer32	read-write	This specifies the time to live for a ping request packet.
NUM hmTrackPingBestRouteIfNumber	1.3.6.1.4.1.248.14.15.1.1.1.16	InterfaceIndexOrZero	read-only	This shows the number of the interface which belongs to the best route. The interface number is zero if the best route is not used to send ping packets.
INT hmTrackLogicalOperator	1.3.6.1.4.1.248.14.15.1.1.1.17	INTEGER	read-write	Defines the logical operation performed on the instances
INT hmTrackSendStateChangeTrap	1.3.6.1.4.1.248.14.15.1.1.1.18	INTEGER	read-write	Enables or disables the sending of a trap when hmTrackState changes
hmTrackingApplicationTable	1.3.6.1.4.1.248.14.15.1.2		not-accessible	This table contains information about registered applications, for each object being tracked.
hmTrackingApplicationEntry	1.3.6.1.4.1.248.14.15.1.2.1		not-accessible	The entry of the hmTrackingApplicationTable.
I32 hmTrackAppId	1.3.6.1.4.1.248.14.15.1.2.1.2	Integer32	not-accessible	The id of an application which tracks an object.
STR hmTrackAppName	1.3.6.1.4.1.248.14.15.1.2.1.3	DisplayString	read-only	The name of the registered application.
hmTrackLogicalInstanceTable	1.3.6.1.4.1.248.14.15.1.3		not-accessible	This table contains information the tracking instances that are combined into a logical tracking instance.
hmTrackLogicalInstanceEntry	1.3.6.1.4.1.248.14.15.1.3.1		not-accessible	The entry of the hmTrackLogicalInstanceTable.
I32 hmTrackLogicalInstanceId	1.3.6.1.4.1.248.14.15.1.3.1.2	Integer32	not-accessible	The id of an object that is a member of the logical tracking object.
ROW hmTrackLogicInstRowStatus	1.3.6.1.4.1.248.14.15.1.3.1.3	RowStatus	read-create	Defines the status of the Logic Tracking member entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the row exists.

RFC description

Hirschmann Platform tracking MIB for inventory and device identification management.

Start monitoring Hirschmann industrial switch/router (object tracking for failover) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HMTRACKING-SNMP-MIB

What Is HMTRACKING-SNMP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description