HPN-ICF-RDDC-MIB

All MIBs › HPN-ICF-RDDC-MIB

Last Updated: 2014-01-03

Category: Technology: High Availability, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Redundant Device Detection and Control (RDDC) for chassis high-availability on HP/Comware platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-RDDC-MIB?

HPN-ICF-RDDC-MIB is an HP Networking (H3C-derived ICF platform) proprietary MIB managing RDDC (Redundancy Group) failover, which minimizes data/control-plane disruption when one IRF group-node fails over to another. Its group table, keyed by index, records group name, preemption/hold-time remaining and configured values, while a node table records node ID, bind type/info, priority, weight, and status, alongside switch-reason, switchover, fail-interface-recover, and fail-interface-generate notifications. As a status/notification MIB it lets an administrator confirm redundancy-group node priority and get alerted on failover events on an HP Networking IRF system. It is deployed on HP Networking (H3C-derived) IRF stacking equipment (redundancy groups). Engineers can download the HPN-ICF-RDDC-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-RDDC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking (H3C-derived) IRF stacking equipment (redundancy groups)

Monitoring Examples

An administrator receives hpnicfRddcSwitchoverTrap and checks hpnicfRddcSwitchReason to understand why an IRF redundancy-group failover occurred on an HP Networking system.

What Can Be Monitored

redundancy-group node priority and failover events

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

ifDescr	OBJECT-TYPE
ifIndex	OBJECT-TYPE

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfRddc	1.3.6.1.4.1.11.2.14.11.15.2.151			Redundancy group is concerned with ensuring minimal disruption to data and control planes in case of a failover. If one of the group-node in an IRF fails, the other group-node in the IRF takes over the function of the failed group-node with minimal service interruption. This module defines the objects pertaining to redundancy group(RDDC).
hpnicfRddcNotifications	1.3.6.1.4.1.11.2.14.11.15.2.151.0
NTF hpnicfRddcSwitchoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.151.0.1			Notification to signal switchover/failover.
NTF hpnicfRddcFailIfRecoverTrap	1.3.6.1.4.1.11.2.14.11.15.2.151.0.2			Notification to signal the failed interface recovered.
NTF hpnicfRddcFailIfGenerateTrap	1.3.6.1.4.1.11.2.14.11.15.2.151.0.3			Notification to signal the failed interface generated.
hpnicfRddcObjects	1.3.6.1.4.1.11.2.14.11.15.2.151.1
hpnicfRddcInfo	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1
hpnicfRddcTable	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1		not-accessible	This table describes the current status of redundancy groups.
hpnicfRddcEntry	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1		not-accessible	The entry of hpnicfRddcEntry.
U32 hpnicfRddcGroupIdx	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.1	Unsigned32	accessible-for-notify	Unique identifier of this redundancy group. 0 is an invalid value.
OCT hpnicfRddcGroupName	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.2	OCTET STRING	read-only	Unique identifier of this redundancy group.
U32 hpnicfRddcPreempTimeRemain	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.3	Unsigned32	read-only	The redundancy group should not switch back immediately when a failover is recovered. The preempt delay timer is started for waiting the failover became believable. This object contains the current preempt delay time remained when a failover is recovered.
U32 hpnicfRddcPreempTimeConfig	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.4	Unsigned32	read-only	The current preempt delay time.
U32 hpnicfRddcHoldTimeRemain	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.5	Unsigned32	read-only	To prevent frequent switchovers of the redundancy group, the hold-down timer started to keeping in a state for a fixed time. This object contains the current remained hold-down time when a switchover or a failover recovery occurred.
U32 hpnicfRddcHoldTimeConfig	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.1.1.6	Unsigned32	read-only	The current hold-down time.
hpnicfRddcNodeTable	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2		not-accessible	This table describes the current status of a redundancy group node.
hpnicfRddcNodeEntry	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1		not-accessible	The entry of hpnicfRddcNodeEntry.
U32 hpnicfRddcNodeGroupIdx	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.1	Unsigned32	not-accessible	Unique identifier of this redundancy group. 0 is an invalid value.
U32 hpnicfRddcNodeId	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.2	Unsigned32	not-accessible	Unique identifier of this redundancy group node. 0 is an invalid value.
INT hpnicfRddcNodeBindType	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.3	INTEGER	read-only	The bind type of this redundancy group node. The current version only supports binding chassis of an IRF device.
U32 hpnicfRddcNodeBindInfo	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.4	Unsigned32	read-only	The bind information of this redundancy group node. The current version only supports binding chassis of an IRF device. If the value of hpnicfRddcNodeBindType is invalid, the value of hpnicfRddcNodeBindInfo is 65535.
U32 hpnicfRddcNodePriority	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.5	Unsigned32	read-only	The priority of this redundancy group node. The higher the value, the greater the priority.
I32 hpnicfRddcNodeWeight	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.6	Integer32	read-only	The current weight of this redundancy group node. The max value is 255.
INT hpnicfRddcNodeStatus	1.3.6.1.4.1.11.2.14.11.15.2.151.1.1.2.1.7	INTEGER	read-only	The current status of this redundancy group node.
hpnicfRddcTrapObjects	1.3.6.1.4.1.11.2.14.11.15.2.151.1.2
STR hpnicfRddcNodeInfo	1.3.6.1.4.1.11.2.14.11.15.2.151.1.2.1	DisplayString	accessible-for-notify	This object contains node identification information where the switchover occurred.
STR hpnicfRddcSwitchReason	1.3.6.1.4.1.11.2.14.11.15.2.151.1.2.2	DisplayString	accessible-for-notify	This object contains the cause for switchover.

RFC description

Monitors redundancy groups and failover status in HP IRF systems to ensure minimal disruption to data and control planes during node failures.

Start monitoring HP Networking (H3C-derived) IRF stacking equipment (redundancy group failover) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-RDDC-MIB

What Is HPN-ICF-RDDC-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description