HPN-ICF-RCR-MIB

All MIBs › HPN-ICF-RCR-MIB

Last Updated: 2005-06-28

Category: Technology: High Availability, Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Router Configuration Replication (RCR) for synchronizing configuration across redundant HP/Comware devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-RCR-MIB?

HPN-ICF-RCR-MIB is an HP/H3C Comware private MIB supporting Resilient Controllable Routing (RCR) on router devices, a feature that dynamically redistributes outbound traffic across multiple external interfaces based on their real-time performance and load. It exposes objects related to configuring and monitoring this intelligent traffic-distribution and interface-selection function. In terms of monitoring, it is used to track the performance and traffic load of each external interface so the router can pick the optimal path, effectively giving visibility into interface-level performance health rather than raw hardware sensors. Because RCR operates on top of a router's existing interface and routing infrastructure, it likely depends on the standard IF-MIB for interface identification and traffic counters. It is deployed on HP/H3C Comware edge/border routers with multiple WAN/internet uplinks that need automatic load-aware failover or balancing. Network engineers evaluating or troubleshooting this functionality can download the HPN-ICF-RCR-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-RCR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware routers with multiple external/WAN interfaces

Monitoring Examples

Since specific object names weren't captured for this module, a typical RCR deployment would involve polling per-interface performance/load metrics (mapped to standard ifTable entries) to see which external interface RCR has currently selected as optimal. An administrator would watch for the selected interface changing unexpectedly, which would indicate RCR detected degraded performance or overload on the previously active link. This kind of monitoring helps confirm that automatic outbound path selection is behaving as configured.

What Can Be Monitored

per-interface traffic load
per-interface performance metrics
currently selected optimal external interface
RCR configuration state

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using hpnicfRcrMRAllMaxUsedBandRate OID:

Select an HP/H3C Comware router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfRcrMRAllMaxUsedBandRate into the Find box to locate it in the OID tree, then select it and click OK. The max used band rate of all external interfaces on member router-devices(MRs) which are controlled by RCR. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfRcr	1.3.6.1.4.1.11.2.14.11.15.2.48			This MIB is applicable to router-devices. It's made for RCR (Resilient Controllable Routing). RCR provides an effective resolution which can dynamically auto-adjust outbound traffic to the optimal external interface by monitoring the performance and traffic load of each external interface. It provides the functions of intelligentized traffic load distribution and the optimal external interface selection. This can optimally utilize the external interfaces. Furthermore, RCR realized the function which can select the optimal external interface based on different classes of operation flow.
hpnicfRcrMR	1.3.6.1.4.1.11.2.14.11.15.2.48.1
hpnicfRcrMRGroup	1.3.6.1.4.1.11.2.14.11.15.2.48.1.1
I32 hpnicfRcrMRAllMaxUsedBandRateEx	1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.1	Integer32	read-write	The max used band rate of all external interfaces on member router-devices(MRs) which are controlled by RCR.
I32 hpnicfRcrMRAllMinUsedBandRate	1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.2	Integer32	read-write	The min used band rate of all external interfaces on MRs which are controlled by RCR.
I32 hpnicfRcrMRListenTime	1.3.6.1.4.1.11.2.14.11.15.2.48.1.1.3	Integer32	read-write	The persistent time of a probe on member router-device(MR) which is controlled by RCR.
hpnicfRcrMRStateTable	1.3.6.1.4.1.11.2.14.11.15.2.48.1.2		not-accessible	This table contains state information of each MR which is controlled by RCR.
hpnicfRcrMRStateEntry	1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1		not-accessible	Entry items
OCT hpnicfRcrMRName	1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.1	OCTET STRING	not-accessible	The name of MR which is controlled by RCR.
INT hpnicfRcrMRState	1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.2	INTEGER	read-only	The state of MR where identified on the controller router-device(CR). down: The MR has been enabled but has not connected to the CR with TCP connection. up: The MR has already successfully connected to the CR but has not been ready for adjusting route. controlled: The MR has already passed the consultation with the CR and could be controlled by it.
INT hpnicfRcrMRAuthType	1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.3	INTEGER	read-write	The authentication type of communication packet between CR and MR.
OCT hpnicfRcrMRAuthPwd	1.3.6.1.4.1.11.2.14.11.15.2.48.1.2.1.4	OCTET STRING	read-write	The authentication password of communication packet between CR and MR. Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
hpnicfRcrMROutIfStateTable	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3		not-accessible	This table contains the external interface states of each MR which is controlled by RCR.
hpnicfRcrMROutIfStateEntry	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1		not-accessible	Entry items
OCT hpnicfRcrMROutIfName	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.1	OCTET STRING	not-accessible	The name of external interface on each MR.
INT hpnicfRcrMROutIfState	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.2	INTEGER	read-only	The state of external interface on each MR.
I32 hpnicfRcrMROutIfMaxUsedBandRate	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.3	Integer32	read-write	The max spendable bandwidth rate on external interface.
I32 hpnicfRcrMROutIfMinUsedBandRate	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.4	Integer32	read-write	The min spendable bandwidth rate on external interface.
I32 hpnicfRcrMROutIfUsedBandRate	1.3.6.1.4.1.11.2.14.11.15.2.48.1.3.1.5	Integer32	read-only	The used bandwidth rate on external interface.
hpnicfRcrCR	1.3.6.1.4.1.11.2.14.11.15.2.48.2
hpnicfRcrCRGroup	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1
INT hpnicfRcrCRState	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.1	INTEGER	read-only	The state of the CR which is controlled by RCR. down: The CR has been enabled but has not started a TCP connection server. init: The CR has started a TCP connection server and has been waiting for MR connection, but has not been ready for adjusting route. active: The CR is ready for adjusting route.
I32 hpnicfRcrCRPortNum	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.2	Integer32	read-write	The communication port number between CR and MR.
INT hpnicfRcrCRCtrlMode	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.3	INTEGER	read-write	The observe mode or control mode is configured to operate in the CR. observe: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made but does not implement any changes. controlled: The CR monitors prefixes and external interfaces based on default and user-defined policies and then reports the status of the network and the decisions that should be made and implement any changes.
INT hpnicfRcrCRChooseMode	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.4	INTEGER	read-write	The algorithm used to choose an alternative external interface for a prefix. good: The first external interface that conforms to the policy is selected as the new external interface. best: Information is collected from all external interfaces and the best one is selected even though the best external interface may not be in-policy.
I32 hpnicfRcrCRKeepaliveTime	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.5	Integer32	read-write	The interval time of the transmission of the keepalive communication packet between CR and MR.
INT hpnicfRcrCRPolicyMode	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.6	INTEGER	read-write	The chosen policy mode which decides to change what prefix. prefix: An RCR policy is designed to select IP prefixes or to select RCR learn policies using a match clause and then to apply RCR policy configurations using a set clause. operation: To deside to adjusted prefixes based on operation which user configured. study: To learn and optimize prefixes based on the highest throughput or the highest delay.
INT hpnicfRcrCRStudyMode	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.7	INTEGER	read-write	The mode of collecting prefix in studying configuration mode. It's to collect either the prefix of max thoughtout or the prefix of max delay time. It doesn't have a value when CR isn't in studying configuration mode.
I32 hpnicfRcrCRStudyIpPrefixNum	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.8	Integer32	read-write	The max number of collecting prefix in studying configuration mode.
I32 hpnicfRcrCRIpPrefixLen	1.3.6.1.4.1.11.2.14.11.15.2.48.2.1.9	Integer32	read-write	The mask length of collecting prefix in configuration mode.
hpnicfRcrCRRcrPolicyTable	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2		not-accessible	This table contains objects to get statistic information of interfaces on a device.
hpnicfRcrCRRcrPolicyEntry	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1		not-accessible	Entry items
I32 hpnicfRcrCRRcrPlyID	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.1	Integer32	not-accessible	The ID of RCR policy which the user has configured.
OCT hpnicfRcrCRRcrPlyMatchIPListName	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.2	OCTET STRING	read-write	The matched IP prefix list name of RCR policy which the user has configured.
INT hpnicfRcrCRRcrPlyMatchStudyEnable	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.3	INTEGER	read-write	Whether the RCR policy which the user has configured is matched for studying prefix mode.
OCT hpnicfRcrCRRcrPlyMatchOperPlyName	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.4	OCTET STRING	read-write	The matched operation policy name of RCR policy which the user has configured.
I32 hpnicfRcrCRRcrAclNumber	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.5	Integer32	read-write	The matched acl number of RCR operation policy which the user has configured.
I32 hpnicfRcrCRRcrPlyDelayTime	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.6	Integer32	read-write	The absolute maximum delay time. The range of values that can be configured is from 1 to 10000.
I32 hpnicfRcrCRRcrPlyLossRate	1.3.6.1.4.1.11.2.14.11.15.2.48.2.2.1.7	Integer32	read-write	The packet loss percent of prefix which the CR concerns.
hpnicfRcrCRMatPrefixPerfTable	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3		not-accessible	This table contains the matched prefix performance information.
hpnicfRcrCRMatPrefixPerfEntry	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1		not-accessible	Entry items
IPt hpnicfRcrCRMatPrefPerfAddrType	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.1	InetAddressType	not-accessible	The destination IP addresses type of matched prefix which the CR wants (IPv4 or IPv6).
IP hpnicfRcrCRMatPrefPerfDestIPAddr	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.2	InetAddress	not-accessible	The destination IP address of matched prefix which the CR wants.
I32 hpnicfRcrCRMatPrefPerfDestMaskLen	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.3	Integer32	not-accessible	The destination IP address mask length of matched prefix which the CR wants.
I32 hpnicfRcrCRMatPrefPerfDelayTime	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.4	Integer32	read-only	The absolute maximum delay time of prefix which the CR has configured.
I32 hpnicfRcrCRMatPrefPerfLossRate	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.5	Integer32	read-only	The packet loss percent of prefix which the CR has configured.
I32 hpnicfRcrCRMatPrefPerfThroughput	1.3.6.1.4.1.11.2.14.11.15.2.48.2.3.1.6	Integer32	read-only	The bandwidth of prefix which the CR has monitored.
hpnicfRcrCRAdjustPrefixTable	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4		not-accessible	This table contains objects to get adjusted prefix information which the CR controlled.
hpnicfRcrCRAdjustPrefixEntry	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1		not-accessible	Entry items
IPt hpnicfRcrCRAdjuPrefDestAddrType	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.1	InetAddressType	not-accessible	The IP address type of the adjusted prefix which CR controlled (IPv4 or IPv6).
IP hpnicfRcrCRAdjuPrefDestAddr	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.2	InetAddress	not-accessible	The IP address of the adjusted prefix which CR controlled.
I32 hpnicfRcrCRAdjuPrefMaskLen	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.3	Integer32	not-accessible	The IP address mask length of the adjusted prefix which CR controlled.
OCT hpnicfRcrCRAdjuPrefPreMRName	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.4	OCTET STRING	not-accessible	The name of the MR which the previous outbound traffic flows through.
OCT hpnicfRcrCRAdjuPrefPreOutIfName	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.5	OCTET STRING	not-accessible	The name of the external interface on the MR which the previous outbound traffic flows through.
OCT hpnicfRcrCRAdjuPrefCurMRName	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.6	OCTET STRING	read-only	The name of the MR which the current outbound traffic flows through.
OCT hpnicfRcrCRAdjuPrefCurOutIfName	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.7	OCTET STRING	read-only	The name of the external interface on the MR which the current outbound traffic flows through.
I32 hpnicfRcrCRAdjuPrefPersistTime	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.8	Integer32	read-only	The persisting time from the time which the adjusted outbound traffic has been adjusted by CR to now.
I32 hpnicfRcrCRAdjuPrefAgeTime	1.3.6.1.4.1.11.2.14.11.15.2.48.2.4.1.9	Integer32	read-only	The time which the adjusted prefix remains.

RFC description

Hewlett-Packard Resilient Controllable Routing MIB for dynamic traffic load distribution and optimal interface selection.

Start monitoring HP/H3C Comware routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-RCR-MIB