HUAWEI-RRPP-MIB

All MIBs › HUAWEI-RRPP-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2015-03-23

Category: Technology: High Availability, Technology: Switching/L2, Vendor: Huawei

Description: Huawei RRPP (Rapid Ring Protection Protocol) MIB for managing proprietary Ethernet ring protection with sub-50ms recovery.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-RRPP-MIB?

HUAWEI-RRPP-MIB is a Huawei-proprietary SNMP module for managing the Rapid Ring Protection Protocol, a Layer 2 Ethernet ring-topology protection mechanism used on Huawei switches. It exposes configuration and operational-state data for RRPP domains, protection rings, ring nodes, and control VLANs, including which switch acts as the master node and which ports are blocked or forwarding. Administrators rely on it to monitor the hardware and software status of ring protection: the operational state of each ring port (blocking vs. forwarding), the master node's role, and whether protection switching has fired after a link failure, effectively substituting for slower Spanning Tree Protocol convergence monitoring. Because RRPP rings run over standard Ethernet interfaces and VLANs, this MIB has an implicit dependency on IF-MIB interface indices and Huawei's VLAN MIBs. It is typically deployed in Huawei metro Ethernet or campus ring networks that require sub-second failover after a ring link break, and a HUAWEI-RRPP-MIB download is available for administrators who need to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-RRPP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei Ethernet switches
Huawei metro/campus ring-topology switches

Monitoring Examples

An administrator would poll ring and ring-node objects (following Huawei's convention, tables such as an hwRrppRingTable/hwRrppRingNodeTable) to check each node's role (master/transit) and each control port's blocking or forwarding state. A port that suddenly transitions from blocking to forwarding, or a ring-state change, signals that a ring link has failed and protection switching has engaged. Repeated topology-change counts over time reveal a flapping ring link that needs physical attention before it causes an outage.

What Can Be Monitored

RRPP ring/domain status
ring node role (master/transit)
control port blocking/forwarding state
protection-switching events
control VLAN configuration

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex
ifName	OBJECT-TYPE

From Q-BRIDGE-MIB

VlanId

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwRrpp	1.3.6.1.4.1.2011.5.25.113			The RRPP (Rapid Ring Protection protocol) provides fast protection switching to layer 2 switches interconnected in an Ethernet ring topology. When a link in the ring breaks, the RRPP can recover the data path quickly. Its protection switching is similar to what can be achieved with the Spanning Tree Protocol (STP), but the converging time is less than a second after link failure. This MIB defines management information used on products which support RRPP.
hwRrppScalarGroup	1.3.6.1.4.1.2011.5.25.113.1
ENA hwRrppEnableStatus	1.3.6.1.4.1.2011.5.25.113.1.1	EnabledStatus	read-write	Indicating whether the RRPP is enabled on this switch.
I32 hwRrppLinkupDelayTime	1.3.6.1.4.1.2011.5.25.113.1.2	Integer32	read-write	This value indicates the delay when ports change to Up. The value of this node ranges with products. The default value is 0.
hwRrppTable	1.3.6.1.4.1.2011.5.25.113.2
hwRrppDomainTable	1.3.6.1.4.1.2011.5.25.113.2.1		not-accessible	A table containing information about configurations and status of a RRPP domain.
hwRrppDomainEntry	1.3.6.1.4.1.2011.5.25.113.2.1.1		not-accessible	Detailed information of a specified RRPP domain.
I32 hwRrppDomainID	1.3.6.1.4.1.2011.5.25.113.2.1.1.1	Integer32	not-accessible	An index uniquely identifies a RRPP domain. This value can't be modified after created.
I32 hwRrppDomainControlVlanID	1.3.6.1.4.1.2011.5.25.113.2.1.1.2	Integer32	read-create	Index of the control VLAN specified to a domain. The value 65535 indicates the control VLAN has not been configured. The VLAN assigned to a RRPP Domain must not have been created. This value can't be modified after created.
I32 hwRrppDomainHelloTime	1.3.6.1.4.1.2011.5.25.113.2.1.1.3	Integer32	read-create	The value indicates the interval between two hello packets sent by master-node, and its unit is second. The value ranges from 1s~10s.
I32 hwRrppDomainFailTime	1.3.6.1.4.1.2011.5.25.113.2.1.1.4	Integer32	read-create	The expiration value of the fail-period timer and its unit is second. If not receiving hello packets before this expires, the master-node considers the ring is broken. The value of this node ranges with products, which must not be less than triple hwRrppDomainHelloTime's value.
ROW hwRrppDomainRowStatus	1.3.6.1.4.1.2011.5.25.113.2.1.1.5	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
INT hwRrppDomainResetStatistics	1.3.6.1.4.1.2011.5.25.113.2.1.1.6	INTEGER	read-create	Clears the statistics of packets received and sent on the current domain.
ENA hwRrppMulSubRingProtection	1.3.6.1.4.1.2011.5.25.113.2.1.1.7	EnabledStatus	read-create	Indicating whether the rrpp mul-sub-ring protection is enabled on this switch.
OCT hwRrppDomainProtectedVlan	1.3.6.1.4.1.2011.5.25.113.2.1.1.8	OCTET STRING	read-create	Information of instance index protected by a domain. The instance index ranging from 0 to 48 is listed in a character string in order. The value of each character can be either 0 or 1. Character 0 indicates that the corresponding instance is not proteced while character 1 indicates that the corresponding instance is proteced. For example, set character string 00101 to protect instance 2 and instance 4, and not to protect the rest of instances.
OCT hwRrppDomainDescription	1.3.6.1.4.1.2011.5.25.113.2.1.1.9	OCTET STRING	read-create	A textual description of the RRPP domain. It is mandatory that this only contain no more than 255 printable ASCII characters.
hwRrppRingTable	1.3.6.1.4.1.2011.5.25.113.2.2		not-accessible	A table containing information about configurations and status of a RRPP Ring.
hwRrppRingEntry	1.3.6.1.4.1.2011.5.25.113.2.2.1		not-accessible	Detailed information of a specified RRPP Ring.
I32 hwRrppRingID	1.3.6.1.4.1.2011.5.25.113.2.2.1.1	Integer32	not-accessible	An index uniquely identifies a RRPP Ring. This value can't be modified after created.
ENA hwRrppRingEnableStatus	1.3.6.1.4.1.2011.5.25.113.2.2.1.2	EnabledStatus	read-create	Indicating whether the RRPP is enabled on this Ring. NOTE: If major-ring and sub-ring(s) of a domain coexist on a switch, major-ring must be enabled before sub-ring is enabled. And sub-ring must be disabled before major-ring is disabled.
INT hwRrppRingActive	1.3.6.1.4.1.2011.5.25.113.2.2.1.3	INTEGER	read-only	As both hwRrppEnableStatus and hwRrppRingEnableStatus are enabled, the ring is activated. Whereas either of the two items is disabled, the ring is inactive.
INT hwRrppRingState	1.3.6.1.4.1.2011.5.25.113.2.2.1.4	INTEGER	read-only	The status (i.e. unknown, health or fault) of the Ethernet ring.
INT hwRrppRingNodeMode	1.3.6.1.4.1.2011.5.25.113.2.2.1.5	INTEGER	read-create	There are four RRPP node modes for the switch on a RRPP ring, such as master, transit, edge and assistant-edge. Each RRPP ring has a single designated master-node. All other nodes except edge-node and assistant-edge-node on that ring are referred to as transit-nodes. The node mode of edge and assistant-edge should be configured only on sub-ring. When there is a common link between a sub-ring and its major-ring, the node mode of the sub-ring must be edge or assistant-edge, and they must be configured in pairs. If node mode is designated as edge or assistant-edge, several points should be noticed: Major-ring must be created before a sub-ring is created; Major-ring can't be deleted unless all its sub-rings are deleted; The node mode of the switch on major-ring must be transit; Major-ring and sub-ring must have only a common port. This value can't be modified after created.
NUM hwRrppRingPrimaryPort	1.3.6.1.4.1.2011.5.25.113.2.2.1.6	InterfaceIndex	read-create	If the switch is a master-node or transit-node, this value is ifIndex of the primary port; otherwise, if the switch is an edge-node or assistant-edge-node, this value is ifIndex of the common port. This value is 0, if the port doesn't exist. This value can't be modified after created.
NUM hwRrppRingSecondaryPort	1.3.6.1.4.1.2011.5.25.113.2.2.1.7	InterfaceIndex	read-create	If the switch is a master-node or transit-node, this value is ifIndex of the secondary port; otherwise, if the switch is an edge-node or assistant-edge-node, this value is ifIndex of the edge port. This value is 0, if the port doesn't exist. This value can't be modified after created.
INT hwRrppRingLevel	1.3.6.1.4.1.2011.5.25.113.2.2.1.8	INTEGER	read-create	Level of a ring. This field should be set 0 on major-ring and 1 on the sub-ring. This value can't be modified after created.
ROW hwRrppRingRowStatus	1.3.6.1.4.1.2011.5.25.113.2.2.1.9	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation. To create a new row, hwRrppRingNodeMode, hwRrppRingPrimaryPort, hwRrppRingSecondaryPort and hwRrppRingLevel must be specified.
INT hwRrppRingResetStatistics	1.3.6.1.4.1.2011.5.25.113.2.2.1.10	INTEGER	read-create	Clears the statistics of packets received and sent on the current ring.
hwRrppPortTable	1.3.6.1.4.1.2011.5.25.113.2.3		not-accessible	A table containing information about configurations and status of a RRPP port.
hwRrppPortEntry	1.3.6.1.4.1.2011.5.25.113.2.3.1		not-accessible	Detailed information of a specified RRPP port.
NUM hwRrppPortID	1.3.6.1.4.1.2011.5.25.113.2.3.1.1	InterfaceIndex	not-accessible	Logical index of the interface index.
INT hwRrppPortType	1.3.6.1.4.1.2011.5.25.113.2.3.1.2	INTEGER	read-only	The interface type of the RRPP port. (i.e. FE, GE, VE, Eth-Trunk, XGE and etc).
INT hwRrppPortRole	1.3.6.1.4.1.2011.5.25.113.2.3.1.3	INTEGER	read-only	The RRPP role of the port. (i.e. primary, secondary, common or edge port).
INT hwRrppPortState	1.3.6.1.4.1.2011.5.25.113.2.3.1.4	INTEGER	read-only	State of RRPP port, including unknown, unblocked, blocked and down.
C32 hwRrppPortRXError	1.3.6.1.4.1.2011.5.25.113.2.3.1.5	Counter32	read-only	The statistics of illegal RRPP packets received from this port.
C32 hwRrppPortRXHello	1.3.6.1.4.1.2011.5.25.113.2.3.1.6	Counter32	read-only	The statistics of hello packets received from this port on specified ring.
C32 hwRrppPortRXLinkUp	1.3.6.1.4.1.2011.5.25.113.2.3.1.7	Counter32	read-only	The statistics of link-up packets received from this port on specified ring.
C32 hwRrppPortRXLinkDown	1.3.6.1.4.1.2011.5.25.113.2.3.1.8	Counter32	read-only	The statistics of link-down packets received from this port on specified ring.
C32 hwRrppPortRXCommonFlush	1.3.6.1.4.1.2011.5.25.113.2.3.1.9	Counter32	read-only	The statistics of common-flush packets received from this port on specified ring. Instruction When master-node receives valid link-down packets or link-up packets, it will send common-flush packets, instructing the other nodes on the ring to flush their forwarding database. When the nodes except master-node receive common-flush, they will flush forwarding database. If there is any port blocked on that node, it won't be unblocked.
C32 hwRrppPortRXCompleteFlush	1.3.6.1.4.1.2011.5.25.113.2.3.1.10	Counter32	read-only	The statistics of complete-flush packets received from this port on specified ring. Instruction When the ring recovers, master-node will receive its own hello packets. It will send complete-flush packets, instructing the other nodes on the ring to flush their forwarding database. When the nodes except master-node receive complete-flush, they will flush forwarding database. If there is any port blocked on that node, it will be unblocked.
C32 hwRrppPortRXEdgeHello	1.3.6.1.4.1.2011.5.25.113.2.3.1.11	Counter32	read-only	The statistics of edge-hello packets received from this port on specified ring. Instruction When edge-node sends edge-hello packets, assistantEdge-node will receive its own edge-hello packets from the common link and the master ring.
C32 hwRrppPortRXMajorFault	1.3.6.1.4.1.2011.5.25.113.2.3.1.12	Counter32	read-only	The statistics of major-fault packets received from this port on specified ring. Instruction When assistantEdge can't receive edge-hello packets in the specified fault-time, assistantEdge-node will send its own major-fault packets from the edge port around the sub ring. Edge-node will receive the major-fault packets from its edge port. Then Edge-node will block its edge port.
C32 hwRrppPortTXError	1.3.6.1.4.1.2011.5.25.113.2.3.1.13	Counter32	read-only	The statistics of RRPP packets failed to send out of this port.
C32 hwRrppPortTXHello	1.3.6.1.4.1.2011.5.25.113.2.3.1.14	Counter32	read-only	The statistics of hello packets sent from this port on specified ring.
C32 hwRrppPortTXLinkUp	1.3.6.1.4.1.2011.5.25.113.2.3.1.15	Counter32	read-only	The statistics of link-up packets sent from this port on specified ring.
C32 hwRrppPortTXLinkDown	1.3.6.1.4.1.2011.5.25.113.2.3.1.16	Counter32	read-only	The statistics of link-down packets sent from this port on specified ring.
C32 hwRrppPortTXCommonFlush	1.3.6.1.4.1.2011.5.25.113.2.3.1.17	Counter32	read-only	The statistics of common-flush packets sent from this port on specified ring.
C32 hwRrppPortTXCompleteFlush	1.3.6.1.4.1.2011.5.25.113.2.3.1.18	Counter32	read-only	The statistics of complete-flush packets sent from this port on specified ring.
C32 hwRrppPortTXEdgeHello	1.3.6.1.4.1.2011.5.25.113.2.3.1.19	Counter32	read-only	The statistics of edge-hello packets sent from this port on specified ring.
C32 hwRrppPortTXMajorFault	1.3.6.1.4.1.2011.5.25.113.2.3.1.20	Counter32	read-only	The statistics of major-fault packets sent from this port on specified ring.
hwRrppTrackInterfaceTable	1.3.6.1.4.1.2011.5.25.113.2.4		not-accessible	A table containing information about tracking port.
hwRrppTrackInterfaceEntry	1.3.6.1.4.1.2011.5.25.113.2.4.1		not-accessible	Detailed information of a specified RRPP track interface.
NUM hwRrppTrackInterfaceID	1.3.6.1.4.1.2011.5.25.113.2.4.1.1	InterfaceIndex	not-accessible	Logical index of track interface.
ROW hwRrppTrackRowStatus	1.3.6.1.4.1.2011.5.25.113.2.4.1.2	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
hwRrppRingGroupTable	1.3.6.1.4.1.2011.5.25.113.2.5		not-accessible	A table containing information about an RRPP ring group and created without the domain or ring.
hwRrppRingGroupEntry	1.3.6.1.4.1.2011.5.25.113.2.5.1		not-accessible	Detailed information about a specified RRPP ring group.
I32 hwRrppRingGroupID	1.3.6.1.4.1.2011.5.25.113.2.5.1.1	Integer32	not-accessible	index of the RRPP ring group. This value can't be modified after created.
ROW hwRrppRingGroupRowStatus	1.3.6.1.4.1.2011.5.25.113.2.5.1.2	RowStatus	read-create	Row status in the ring group configuration table. hwRrppRingGroupID must be specified to create a row.
hwRrppRingGroupMemberTable	1.3.6.1.4.1.2011.5.25.113.2.6		not-accessible	A table containing information about the configurations and status of an RRPP ring.
hwRrppRingGroupMemberEntry	1.3.6.1.4.1.2011.5.25.113.2.6.1		not-accessible	Detailed information about a specified RRPP ring group.
I32 hwRrppRingGroupMemberDomainID	1.3.6.1.4.1.2011.5.25.113.2.6.1.1	Integer32	not-accessible	Index, namely, domain ID of the members of a ring group. This value cannot be modified after created.
I32 hwRrppRingGroupMemberRingID	1.3.6.1.4.1.2011.5.25.113.2.6.1.2	Integer32	not-accessible	Index, namely, ring ID of the members of a ring group. This value cannot be modified after created.
ENA hwRrppRingGroupIsEdgeHelloProcess	1.3.6.1.4.1.2011.5.25.113.2.6.1.3	EnabledStatus	read-only	Flag carried in the sent edge-Hello Packet.
ROW hwRrppRingGroupMemberRowStatus	1.3.6.1.4.1.2011.5.25.113.2.6.1.4	RowStatus	read-create	Row status in the ring group configuration table. hwRrppRingGroupMemberDomainID, hwRrppRingGroupMemberRingID, and hwRrppRingGroupIsEdgeHelloSender must be specified to create a row.
hwRrppSnoopingTable	1.3.6.1.4.1.2011.5.25.113.3
hwRrppSnoopingInterfaceTable	1.3.6.1.4.1.2011.5.25.113.3.1		not-accessible	A table containing information about RRPP snooping enable interface.
hwRrppSnoopingInterfaceEntry	1.3.6.1.4.1.2011.5.25.113.3.1.1		not-accessible	Detailed information of a specified RRPP snooping enable interface.
NUM hwRrppSnoopingInterfaceId	1.3.6.1.4.1.2011.5.25.113.3.1.1.1	InterfaceIndex	not-accessible	Logical index of the interface index.
OCT hwRrppSnoopingVsiName	1.3.6.1.4.1.2011.5.25.113.3.1.1.2	OCTET STRING	read-only	The name of VSI which the interface was binding to.
VLA hwRrppSnoopingVlanId	1.3.6.1.4.1.2011.5.25.113.3.1.1.3	VlanId	read-only	The VLAN which the intertace added to.
ENA hwRrppSnoopingEnableStatus	1.3.6.1.4.1.2011.5.25.113.3.1.1.4	EnabledStatus	read-create	Indicating whether the RRPP snooping is enabled on this switch.
ROW hwRrppSnoopingRowStatus	1.3.6.1.4.1.2011.5.25.113.3.1.1.5	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
ENA hwRrppSnoopingAllVsiStatus	1.3.6.1.4.1.2011.5.25.113.3.1.1.6	EnabledStatus	read-create	Indicating whether the RRPP snooping is associating all vsi on this switch. Options: 1. enabled(1) -indicates that the RRPP snooping is associated with all vsi under the same main interface 2. disabled(2)-indicates that the RRPP snooping doesn't perform the command to associated with all vsi under the same main interface Default: disabled
hwRrppSnoopingVsiTable	1.3.6.1.4.1.2011.5.25.113.3.2		not-accessible	A table containing information about RRPP snooping relating interface.
hwRrppSnoopingVsiEntry	1.3.6.1.4.1.2011.5.25.113.3.2.1		not-accessible	Detailed information of a specified RRPP snooping relating interface.
NUM hwRrppSnoopingVsiInterfaceId	1.3.6.1.4.1.2011.5.25.113.3.2.1.1	InterfaceIndex	not-accessible	Logical index of the interface index.
OCT hwVsiName	1.3.6.1.4.1.2011.5.25.113.3.2.1.2	OCTET STRING	not-accessible	The name of VSI.
ROW hwRrppSnoopingVsiRowStatus	1.3.6.1.4.1.2011.5.25.113.3.2.1.3	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
hwRrppNotifications	1.3.6.1.4.1.2011.5.25.113.4
NTF hwRrppRingRecover	1.3.6.1.4.1.2011.5.25.113.4.1			Trap message is generated by master-node on the ring when the ring recovers from fault.
NTF hwRrppRingFail	1.3.6.1.4.1.2011.5.25.113.4.2			Trap message is generated by master-node on the ring when the ring fails.
NTF hwRrppMultiMaster	1.3.6.1.4.1.2011.5.25.113.4.3			Trap message is generated by master-node when it detects there are more than one master-node on the ring.
NTF hwRrppTrackInterfaceDown	1.3.6.1.4.1.2011.5.25.113.4.4			Trap message is generated by RRPP node when the track interface tracked BFD down.
NTF hwRrppTrackInterfaceUp	1.3.6.1.4.1.2011.5.25.113.4.5			Trap message is generated by RRPP node when the track interface tracked BFD up.
NTF hwRrppRingSingleDirectionFail	1.3.6.1.4.1.2011.5.25.113.4.6			Trap message is generated by master-node on the ring when the ring fails from the primary port to the secondary port.
hwRrppMibGroup	1.3.6.1.4.1.2011.5.25.113.5
hwRrppGlobalGroup	1.3.6.1.4.1.2011.5.25.113.5.1			The RRPP global group.
hwRrppDomainGroup	1.3.6.1.4.1.2011.5.25.113.5.2			The RRPP domain group.
hwRrppRingGroup	1.3.6.1.4.1.2011.5.25.113.5.3			The RRPP ring group.
hwRrppPortGroup	1.3.6.1.4.1.2011.5.25.113.5.4			The RRPP port group.
hwRrppTrackInterfaceGroup	1.3.6.1.4.1.2011.5.25.113.5.5			The RRPP Track Interface group.
hwRrppRingGroupGroup	1.3.6.1.4.1.2011.5.25.113.5.6			The RRPP RingGroup group.
hwRrppRingGroupMemberGroup	1.3.6.1.4.1.2011.5.25.113.5.7			The RRPP RingGroupMember group.
hwRrppSnoopingInterfaceGroup	1.3.6.1.4.1.2011.5.25.113.5.8			The RRPP Snooping enable Interface group.
hwRrppSnoopingVsiGroup	1.3.6.1.4.1.2011.5.25.113.5.9			The RRPP Snooping associate vsi group.
hwRrppNotificationGroup	1.3.6.1.4.1.2011.5.25.113.5.10			The notification group.
hwRrppConformance	1.3.6.1.4.1.2011.5.25.113.6
hwRrppCompliances	1.3.6.1.4.1.2011.5.25.113.6.1
hwRrppCompliance	1.3.6.1.4.1.2011.5.25.113.6.1.1			The core compliance statement for all implementations.

RFC description

Huawei Technologies MIB for Rapid Ring Protection Protocol (RRPP), enabling monitoring and management of ring topology protection and failover mechanisms on network switches.

Start monitoring Huawei Ethernet switch, metro/campus ring topology (Rapid Ring Protection Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-RRPP-MIB

What Is HUAWEI-RRPP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description