HUAWEI-ESAP-HOT-STANDBY-MIB

All MIBs › HUAWEI-ESAP-HOT-STANDBY-MIB

Organization: Huawei Technologies Co.,Ltd.

Last Updated: 2013-07-30

Category: Hardware and Environment, Technology: High Availability, Vendor: Huawei

Description: Huawei ESAP hot standby MIB for managing hot-standby redundancy for embedded service application processor modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HUAWEI-ESAP-HOT-STANDBY-MIB?

HUAWEI-ESAP-HOT-STANDBY-MIB is a Huawei Technologies proprietary MIB (based on draft-grall-huawei-ar-hot-standby-mib-01) configuring stateful hot-standby (HSB) redundancy between two Huawei AR routers. Its objects cover a basic-events table (index, time, description), a service table (service ID, local/peer address and port, keepalive count/interval, status), a group table (group ID, associated VRRP ID/interface/status, service ID, enable flag, status), and a hot-standby-status notification. As a configuration/status/notification MIB it lets an administrator confirm which VRRP group is bound to a hot-standby service and get alerted on a state change. It is deployed on Huawei Technologies AR router hot-standby pairs. Engineers can download the HUAWEI-ESAP-HOT-STANDBY-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-ESAP-HOT-STANDBY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Huawei Technologies AR router hot-standby pairs

Monitoring Examples

An administrator receives an hwEsapHsbStatusNotification and checks hwHsbGroupStatus to confirm a hot-standby failover completed correctly between two Huawei AR routers.

What Can Be Monitored

hot-standby service/group status and failover notifications

Imported Objects

From HUAWEI-MIB

hwDatacomm

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DateAndTime
DisplayString
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
hwEsapHsbMIB	1.3.6.1.4.1.2011.5.25.309			The MIB contains objects of huawei-ar-hot-standby , referencing the draft-grall-huawei-ar-hot-standby-mib-01.
hwEsapHsbObject	1.3.6.1.4.1.2011.5.25.309.1
hwEsapHsbBasicEventsTable	1.3.6.1.4.1.2011.5.25.309.1.1		not-accessible	Table of basic data for Esap HSB events. The agent may choose to delete the instances of cEsapHsbBasicEventsEntry as required because of lack of memory. The oldest Events will be selected first for deletion.
hwEsapHsbBasicEventsEntry	1.3.6.1.4.1.2011.5.25.309.1.1.1		not-accessible	An entry in the table, containing general information about an event. This table will always be sparse, i.e., each row will instanciate only a subet of the columnar objects.
I32 hwEsapHsbBasicEventIndex	1.3.6.1.4.1.2011.5.25.309.1.1.1.1	Integer32	not-accessible	An index that uniquely identifies an entry in the log table. These indices are assigned beginning with 1 and increase by one with each new event logged.
STR hwEsapHsbBasicEventTime	1.3.6.1.4.1.2011.5.25.309.1.1.1.2	SnmpAdminString	read-only	The time that the event occurred.
STR hwEsapHsbBasicEventDescription	1.3.6.1.4.1.2011.5.25.309.1.1.1.4	SnmpAdminString	read-only	A description of the event. The value of the object may be a zero-length string.
hwHsbGroupTable	1.3.6.1.4.1.2011.5.25.309.1.2		not-accessible	The Hot-Standby-Group table.
hwHsbGroupEntry	1.3.6.1.4.1.2011.5.25.309.1.2.1		not-accessible	The Hot Standby Group table struct.
I32 hwHsbGroupId	1.3.6.1.4.1.2011.5.25.309.1.2.1.1	Integer32	read-only	The Hot Standby Group Id. This item is index.
I32 hwHsbGroupVrrpId	1.3.6.1.4.1.2011.5.25.309.1.2.1.2	Integer32	read-write	This item shows the Vrrp Group Id that the Hot Standby Group binds.
OCT hwHsbGroupVrrpIf	1.3.6.1.4.1.2011.5.25.309.1.2.1.3	OCTET STRING	read-write	This item shows the Interface where the Vrrp Group created.
OCT hwHsbGroupVrrpStatus	1.3.6.1.4.1.2011.5.25.309.1.2.1.4	OCTET STRING	read-only	This item shows current vrrp status of the Hot Standby Group.
I32 hwHsbGroupServiceId	1.3.6.1.4.1.2011.5.25.309.1.2.1.5	Integer32	read-write	This item shows the Hot Standby Service that Hot Standby Group binds.
T/F hwHsbGroupEnable	1.3.6.1.4.1.2011.5.25.309.1.2.1.6	TruthValue	read-write	This item shows the HSB enable status of Hot Standby Group.
OCT hwHsbGroupStatus	1.3.6.1.4.1.2011.5.25.309.1.2.1.7	OCTET STRING	read-only	This item shows current status of the Hot Standby Group.
hwEsapHsbMIBNotifications	1.3.6.1.4.1.2011.5.25.309.1.3
NTF hwEsapHsbStatusNotification	1.3.6.1.4.1.2011.5.25.309.1.3.1			This notification is used for events that Hot Standby Group status changes from one to another.
hwHsbServiceTable	1.3.6.1.4.1.2011.5.25.309.1.4		not-accessible	The Hot Standby Service table.
hwHsbServiceEntry	1.3.6.1.4.1.2011.5.25.309.1.4.1		not-accessible	The Hot Standby Service table struct.
I32 hwHsbServiceId	1.3.6.1.4.1.2011.5.25.309.1.4.1.1	Integer32	read-only	The Hot Standby Service Id. This item is index.
IP hwHsbLocalAddr	1.3.6.1.4.1.2011.5.25.309.1.4.1.2	IpAddress	read-write	This item shows the local IP address of Hot Standby Service configuration.
I32 hwHsbLocalPort	1.3.6.1.4.1.2011.5.25.309.1.4.1.3	Integer32	read-write	This item shows the local Port of Hot Standby Service configuration.
IP hwHsbPeerAddr	1.3.6.1.4.1.2011.5.25.309.1.4.1.4	IpAddress	read-write	This item shows the peer IP address of Hot Standby Service configuration.
I32 hwHsbPeerPort	1.3.6.1.4.1.2011.5.25.309.1.4.1.5	Integer32	read-write	This item shows the peer Port of Hot Standby Service configuration.
I32 hwHsbKeepAliveTimes	1.3.6.1.4.1.2011.5.25.309.1.4.1.6	Integer32	read-write	This item shows the keep alive times of Hot Standby Service configuration.
I32 hwHsbKeepAliveInterval	1.3.6.1.4.1.2011.5.25.309.1.4.1.7	Integer32	read-write	This item shows the keep alive interval of Hot Standby Service configuration.
OCT hwHsbServiceStatus	1.3.6.1.4.1.2011.5.25.309.1.4.1.8	OCTET STRING	read-only	This item shows current tunnel status of Hot Standby Service.
hwEsapHsbMibConformance	1.3.6.1.4.1.2011.5.25.309.2
hwEsapHsbMibGroups	1.3.6.1.4.1.2011.5.25.309.2.1
hwEsapHsbMibNotificationGroup	1.3.6.1.4.1.2011.5.25.309.2.1.1			This item is a Hot Standby Group Notification, tells the backup status changes of Hot Standby Group.
hwEsapHsbBasicMibGroup	1.3.6.1.4.1.2011.5.25.309.2.1.2			This is the hot standby basic event group.
hwEsapHsbGroupMibGroup	1.3.6.1.4.1.2011.5.25.309.2.1.3			This is the Hot Standby Group group.
hwEsapHsbServiceMibGroup	1.3.6.1.4.1.2011.5.25.309.2.1.4			This is the hot standby service group.
hwEsapHsbMIBCompliances	1.3.6.1.4.1.2011.5.25.309.2.2
hwEsapHsbMIBCompliance	1.3.6.1.4.1.2011.5.25.309.2.2.1			The compliance statement for entities which implement the hwEsapHsbMIB.

RFC description

Huawei vendor-private MIB for managing ESAP (Enterprise Service Access Point) hot standby failover and state.

Start monitoring Huawei AR router hot-standby pair with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HUAWEI-ESAP-HOT-STANDBY-MIB

What Is HUAWEI-ESAP-HOT-STANDBY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description