HP-ICF-UFD-MIB

All MIBs › HP-ICF-UFD-MIB

Organization: HP Networking

Last Updated: 2012-04-30

Category: Technology: High Availability, Technology: Link Aggregation, Technology: Switching/L2, Vendor: HP/HPE

Description: HP ICF SNMP MIB for Uplink Failure Detection (UFD) monitoring uplinks and disabling downstream ports upon uplink failure on HP ProCurve switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HP-ICF-UFD-MIB?

HP-ICF-UFD-MIB is an HP Networking proprietary MIB implementing Uplink Failure Detection (UFD), which automatically disables designated downstream ports when a switch loses all of its monitored uplinks — signaling downstream devices (e.g., in a NIC-teaming setup) to fail over. Its objects cover a global admin status and notification-track-ID, and a track table (ID, entity type, links-to-monitor, links-to-transition, monitor/transition link state, entity state, row status), alongside a tracked-link table (ifIndex, link role, auto-disabled/auto-enabled transition flags). As a configuration/status MIB it lets an administrator confirm which downstream ports automatically disable when an uplink group fails, and watch for a triggered failover. It is deployed on HP Networking switches with Uplink Failure Detection. Engineers can download the HP-ICF-UFD-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HP-ICF-UFD-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP Networking switches (Uplink Failure Detection)

Monitoring Examples

An administrator checks hpicfUfdLtDAutoDisabled to confirm downstream ports correctly disabled after an uplink group failure, triggering a NIC-teaming failover on an HP switch.

What Can Be Monitored

uplink group state and downstream port failover

Imported Objects

From HP-ICF-OID

hpSwitch

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpicfUfdMIB	1.3.6.1.4.1.11.2.14.11.5.1.74			The MIB module describes the objects to configure Uplink Failure Detection feature
hpicfUfdNotifications	1.3.6.1.4.1.11.2.14.11.5.1.74.0
hpicfUfdNotificationPrefix	1.3.6.1.4.1.11.2.14.11.5.1.74.0.0
NTF hpicfUfdLtDAutoDisabled	1.3.6.1.4.1.11.2.14.11.5.1.74.0.0.3			This notification is generated when ports in LtD for this track entity are auto-disabled as a result of LtMs loosing link to partner.
NTF hpicfUfdLtDAutoEnabled	1.3.6.1.4.1.11.2.14.11.5.1.74.0.0.4			This notification is generated when ports in LtD for this track entity are auto-enabled as a result of LtMs regaining link to thries partners.
hpicfUfdConfigObjects	1.3.6.1.4.1.11.2.14.11.5.1.74.1
hpicfUfdScalars	1.3.6.1.4.1.11.2.14.11.5.1.74.1.1
INT hpicfUfdAdminStatus	1.3.6.1.4.1.11.2.14.11.5.1.74.1.1.1	INTEGER	read-write	Global administrative status of UFD. UFD is globally disabled by default.
I32 hpicfUfdNotifyTrackId	1.3.6.1.4.1.11.2.14.11.5.1.74.1.1.2	Integer32	accessible-for-notify	The track ID corresponding to track data in the Trap.
hpicfUfdTrackEntities	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2
hpicfUfdTrackTable	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1		not-accessible	A Table of UFD track entities. This table is meant for configuration.
hpicfUfdTrackEntry	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1		not-accessible	An entry in the table containing information about the entity being tracked.
I32 hpicfUfdTrackId	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.1	Integer32	not-accessible	A value that uniquely identifies a row in the track entity table
HPU hpicfUfdTrackEntityType	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.2	HpUfdTrackEntityType	read-write	The type of the entity being tracked by UFD.
OCT hpicfUfdLinksToMonitor	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.3	OCTET STRING	read-write	This is a list of ports configured as links-to-monitor for this track entity.
OCT hpicfUfdLinksToTransition	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.4	OCTET STRING	read-write	This is a list of ports configured as links-to-transition for this track entity. This object will represent the ports in links-to-disable list if the entity type is ufd.
INT hpicfUfdLinksToMonitorState	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.5	INTEGER	read-only	This object specifies the current state of the links-to-monitor. up : At least one port/trunk configured as part of links-to-monitor is linked up. down: All ports/trunks configured as part of links-to-monitor have lost link.
INT hpicfUfdLinksToTransitionState	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.6	INTEGER	read-only	This object specifies the current state of the links-to-transition. up: UFD has not taken any action on the ports/trunks. autoDisabled : UFD has auto-disabled the ports/trunks.
INT hpicfUfdTrackEntityState	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.7	INTEGER	read-only	State of the tracked entity.
ROW hpicfUfdTrackEntityRowStatus	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.8	RowStatus	read-create	Row status of the tracked entity.
HPU hpicfUfdLinksToMonitorType	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.9	HpUfdTrackLinksSubtype	read-write	This object specifies the type of hpicfUfdLinksToMonitor object.
HPU hpicfUfdLinksToTransitionType	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.1.1.10	HpUfdTrackLinksSubtype	read-write	This object specifies the type of hpicfUfdLinksToTransition object.
hpicfUfdTrackedLinkTable	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.2		not-accessible	A Table of UFD entities to track role of the Link.
hpicfUfdTrackedLinkEntry	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.2.1		not-accessible	An entry in the table containing information about the role of a link being tracked.
NUM hpicfUfdIfIndex	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.2.1.1	InterfaceIndex	not-accessible	This object specifies the port in the links to monitor.
INT hpicfUfdLinkRole	1.3.6.1.4.1.11.2.14.11.5.1.74.1.2.2.1.2	INTEGER	read-only	This object specifies the role of the link either uplink or downlink.
hpicfUfdConformance	1.3.6.1.4.1.11.2.14.11.5.1.74.3
hpicfUfdCompliances	1.3.6.1.4.1.11.2.14.11.5.1.74.3.1
hpicfUfdCompliance	1.3.6.1.4.1.11.2.14.11.5.1.74.3.1.1			The compliance statement for SNMP entities which implement the UFD MIB
hpicfUfdCompliance1	1.3.6.1.4.1.11.2.14.11.5.1.74.3.1.2			The compliance statement for SNMP entities which implement the UFD MIB
hpicfUfdGroups	1.3.6.1.4.1.11.2.14.11.5.1.74.3.2
hpicfUfdBaseGroup	1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.1			The collection of objects for UFD base group. This group is mandatory.
hpicfUfdConfigGroup	1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.2			The collection of objects for UFD track entity. This group is mandatory.
hpicfUfdNotificationGroup	1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.3			The collection of objects for UFD notifications.
hpicfUfdConfigGroup1	1.3.6.1.4.1.11.2.14.11.5.1.74.3.2.4			The collection of objects for UFD track entity. This group is mandatory.

RFC description

Uplink Failure Detection (UFD) MIB for HP switches to track link roles and monitor uplink connectivity.

Start monitoring HP Networking switch (Uplink Failure Detection) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HP-ICF-UFD-MIB

What Is HP-ICF-UFD-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description