All MIBs › TIMETRA-SERV-MIB
Organization: Alcatel-Lucent
Last Updated: 2011-02-01
Category: Nokia SR OS / Alcatel-Lucent 7750 SR, Service Management, VPN
Description: Manages Nokia/Alcatel-Lucent 7750 SR VPN and VPLS service instances, SAPs, and bindings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is TIMETRA-SERV-MIB?
TIMETRA-SERV-MIB is the proprietary services-management MIB for Nokia (formerly Alcatel-Lucent) 7x50 SROS-based Service Routers, covering the provisioning and monitoring of customer-facing services such as VPNs, VPLS instances, and Service Access Points (SAPs). It exposes customer and service configuration data — customer records, service bindings, and multi-service site associations — alongside operational/administrative status for each service instance. Its monitoring value centers on service and configuration status rather than raw hardware health: operators track whether customer records and service entries are correctly provisioned (row status), when service configuration last changed, and how many customer/service entries exist versus expected. It depends on the broader TIMETRA MIB family (TIMETRA-TC-MIB for shared conventions, TIMETRA-CHASSIS-MIB for the underlying hardware the services run on) and integrates with SROS's service-oriented management model. It is deployed in service-provider networks running 7750 SR / 7450 ESS platforms to manage VPN/VPLS customer services. TIMETRA-SERV-MIB SNMP monitoring is therefore less about raw hardware sensors and more about confirming that customer and service provisioning state remains consistent and current.
IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-SERV-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Nokia/Alcatel-Lucent 7x50 SROS-based Service Router platforms, entire product line (customer/service provisioning status)
Monitoring Examples
An operator would query custInfoTable/custInfoEntry, indexed by custId, to confirm custDescription, custContact, and custPhone are correctly populated for a customer, and check custRowStatus to verify the customer record is active rather than stuck in a notReady state. Watching custNumEntries against custNextFreeId helps detect unexpected growth or exhaustion of the customer ID space, while custMultiServiceSiteTable/custMultiServiceSiteEntry and custLastMgmtChange reveal when a customer's multi-service site bindings were last modified, useful for auditing unplanned service changes.
What Can Be Monitored
- customer record count and next free ID
- customer description/contact/phone
- customer row status
- last management change timestamp
- multi-service site bindings
This MIB depends on
Related MIBs
Imported Objects
From IF-MIB
| InterfaceIndex | |
| InterfaceIndexOrZero |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressIPv4 | |
| InetAddressIPv6 | |
| InetAddressPrefixLength | |
| InetAddressType | |
| InetAutonomousSystemNumber |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowPointer | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeStamp | |
| TruthValue |
From TIMETRA-CHASSIS-MIB
| tmnxCardSlotNum | OBJECT-TYPE |
| tmnxMDASlotNum | OBJECT-TYPE |
From TIMETRA-FILTER-MIB
| TEntryId | |
| TFilterID | |
| TItemScope |
From TIMETRA-GLOBAL-MIB
| timetraSRMIBModules | OBJECT-IDENTITY |
| tmnxSRConfs | OBJECT-IDENTITY |
| tmnxSRNotifyPrefix | OBJECT-IDENTITY |
| tmnxSRObjs | OBJECT-IDENTITY |
From TIMETRA-QOS-MIB
| tQosIngQGroupName | OBJECT-TYPE |
| tSchedulerPolicyName | OBJECT-TYPE |
| tVirtualSchedulerName | OBJECT-TYPE |
From TIMETRA-TC-MIB
| BgpPeeringStatus | |
| QTag | |
| QTagOrZero | |
| SdpBindId | |
| ServiceAdminStatus | |
| ServiceOperStatus | |
| SvcISID | |
| TBurstPercentOrDefault | |
| TBurstSize | |
| TBurstSizeBytesOverride | |
| TCIRRate | |
| TCIRRateOverride | |
| TDirection | |
| THPolVirtualScheCIRRate | |
| THPolVirtualSchePIRRate | |
| THsmdaWrrWeightOverride | |
| TIngressQueueId | |
| TItemDescription | |
| TLNamedItem | |
| TLNamedItemOrEmpty | |
| TNamedItem | |
| TNamedItemOrEmpty | |
| TPIRRate | |
| TPIRRateOverride | |
| TPolicyID | |
| TPolicyStatementNameOrEmpty | |
| TPortSchedulerPIR | |
| TQosOverrideType | |
| TSiteOperStatus | |
| TmnxAccessLoopEncapDataLink | |
| TmnxAccessLoopEncaps1 | |
| TmnxAccessLoopEncaps2 | |
| TmnxActionType | |
| TmnxAdminState | |
| TmnxAiiType | |
| TmnxAncpStringOrZero | |
| TmnxAppProfileStringOrEmpty | |
| TmnxBgpAutonomousSystem | |
| TmnxCustId | |
| TmnxDefSubIdSource | |
| TmnxEnabledDisabled | |
| TmnxEncapVal | |
| TmnxLdpFECType | |
| TmnxManagedRouteStatus | |
| TmnxMsPwPeSignaling | |
| TmnxOperGrpHoldDownTime | |
| TmnxOperGrpHoldUpTime | |
| TmnxPortID | |
| TmnxPwGlobalId | |
| TmnxPwGlobalIdOrZero | |
| TmnxPwPathHopId | |
| TmnxServId | |
| TmnxSlaProfileStringOrEmpty | |
| TmnxSpbBridgePriority | |
| TmnxSpbFdbLocale | |
| TmnxSpbFdbState | |
| TmnxSpbFid | |
| TmnxSpbFidOrZero | |
| TmnxSpokeSdpId | |
| TmnxSpokeSdpIdOrZero | |
| TmnxSubIdentStringOrEmpty | |
| TmnxSubMgtIntDestIdOrEmpty | |
| TmnxSubProfileStringOrEmpty | |
| TmnxSvcOperGrpCreationOrigin | |
| TmnxTlsGroupId | |
| TmnxVPNRouteDistinguisher | |
| TmnxVRtrIDOrZero |
How to Use in IPNetwork Monitor
Example using custNumEntries OID:
Select a Nokia/Alcatel-Lucent 7x50 SROS-based Service Router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type custNumEntries into the Find box to locate it in the OID tree, then select it and click OK. It reports the current number of customer records configured on this device. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the count changes from its expected baseline, since that would indicate a customer record was added or removed unexpectedly. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| SER custContact | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.4 | ServObjDesc | read-create | The value of the object custContact specifies the name of the primary contact person for this customer. |
| NTF custCreated | 1.3.6.1.4.1.6527.3.1.3.4.1.0.1 | The trap custCreated is sent when a new row is created in the custInfoTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| NTF custDeleted | 1.3.6.1.4.1.6527.3.1.3.4.1.0.2 | The trap custDeleted is sent when an existing row is deleted from the custInfoTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| SER custDescription | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.3 | ServObjDesc | read-create | The value of the object custDescription specifies optional, generic information about this customer in a displayable format. |
| TMN custEgrQosAssignmentPortId | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.2 | TmnxPortID | not-accessible | The value of custEgrQosAssignmentPortId is used as an index of the egress QoS scheduler/arbiter of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler/arbiter. This object refers to the TmnxPortID of these member-ports. |
| C64 custEgrQosPortIdArbitFwdOcts | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.5 | Counter64 | read-only | The value of custEgrQosPortIdArbitFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site egress arbiter policy. |
| C32 custEgrQosPortIdArbitFwdOctsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.7 | Counter32 | read-only | The value of custEgrQosPortIdArbitFwdOctsHi indicates the higher 32 bits of custEgrQosPortIdArbitFwdOcts. |
| C32 custEgrQosPortIdArbitFwdOctsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.6 | Counter32 | read-only | The value of custEgrQosPortIdArbitFwdOctsLo indicates the lower 32 bits of custEgrQosPortIdArbitFwdOcts. |
| C64 custEgrQosPortIdArbitFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.2 | Counter64 | read-only | The value of custEgrQosPortIdArbitFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress arbiter policy. |
| C32 custEgrQosPortIdArbitFwdPktsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.4 | Counter32 | read-only | The value of custEgrQosPortIdArbitFwdPktsHi indicates the higher 32 bits of custEgrQosPortIdArbitFwdPkts. |
| C32 custEgrQosPortIdArbitFwdPktsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.3 | Counter32 | read-only | The value of custEgrQosPortIdArbitFwdPktsLo indicates the lower 32 bits of custEgrQosPortIdArbitFwdPkts. |
| TNA custEgrQosPortIdArbitName | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1.1 | TNamedItem | not-accessible | The value of custEgrQosPortIdArbitName is used as an index of the egress QoS arbiter of this customer multi service site. |
| custEgrQosPortIdArbitStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.18.1 | not-accessible | Each row entry represents the egress statistics for a customer multi-service-site egress arbiter. | |
| custEgrQosPortIdArbitStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.18 | not-accessible | The custEgrQosPortIdArbitStatsTable contains egress QoS arbiter statistics for the customer multi service site. | |
| TNA custEgrQosPortIdSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.1 | TNamedItem | not-accessible | The value of custEgrQosPortIdSchedName is used as an index of the egress QoS scheduler of this customer multi service site. |
| custEgrQosPortIdSchedStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1 | not-accessible | Each row entry represents the egress statistics for a customer multi-service-site egress scheduler. Entries are created when a scheduler policy is applied to an MSS. | |
| custEgrQosPortIdSchedStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.8 | not-accessible | The custEgrQosPortIdSchedStatsTable contains egress QoS scheduler statistics for the customer multi service site. | |
| C64 custEgrQosPortSchedFwdOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.4 | Counter64 | read-only | The value of custEgrQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrQosPortSchedFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.8.1.3 | Counter64 | read-only | The value of custEgrQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| TNA custEgrQosSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1.1 | TNamedItem | not-accessible | The index of the egress QoS scheduler of this customer multi service site. |
| C64 custEgrQosSchedStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1.3 | Counter64 | read-only | The value of the object custEgrQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrQosSchedStatsForwardedPackets | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1.2 | Counter64 | read-only | The value of the object custEgrQosSchedStatsForwardedPackets indicates number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrSchedPlcyPortStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1.3 | Counter64 | read-only | The value of custEgrSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrSchedPlcyPortStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1.2 | Counter64 | read-only | The value of custEgrSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| TMN custEgrSchedPlcyPortStatsPort | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1.1 | TmnxPortID | not-accessible | The value of custEgrSchedPlcyPortStatsPort is used as an index of the egress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler. This object refers to the TmnxPortID of these member-ports. |
| C64 custEgrSchedPlcyStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.12.1.2 | Counter64 | read-only | The value of the object custEgrSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site egress scheduler policy. |
| C64 custEgrSchedPlcyStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.12.1.1 | Counter64 | read-only | The value of the object custEgrSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site egress scheduler policy. |
| TMN custId | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.1 | TmnxCustId | read-only | Customer identifier. This ID must be unique within a service domain. |
| custInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1 | not-accessible | Information about a specific customer. | |
| custInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.1.3 | not-accessible | A table that contains customer information. There is an entry in this table corresponding to the default customer. This entry cannot be edited or deleted, and it is used as the default customer for newly created services. | |
| TMN custIngQosAssignmentPortId | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.2 | TmnxPortID | not-accessible | The value of custIngQosAssignmentPortId is used as an index of the ingress QoS scheduler/arbiter of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler/arbiter. This object refers to the TmnxPortID of these member-ports. |
| C64 custIngQosPortIdArbitFwdOcts | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.5 | Counter64 | read-only | The value of custIngQosPortIdArbitFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site ingress arbiter policy. |
| C32 custIngQosPortIdArbitFwdOctsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.7 | Counter32 | read-only | The value of custIngQosPortIdArbitFwdOctsHi indicates the higher 32 bits of custIngQosPortIdArbitFwdOcts. |
| C32 custIngQosPortIdArbitFwdOctsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.6 | Counter32 | read-only | The value of custIngQosPortIdArbitFwdOctsLo indicates the lower 32 bits of custIngQosPortIdArbitFwdOcts. |
| C64 custIngQosPortIdArbitFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.2 | Counter64 | read-only | The value of custIngQosPortIdArbitFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress arbiter policy. |
| C32 custIngQosPortIdArbitFwdPktsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.4 | Counter32 | read-only | The value of custIngQosPortIdArbitFwdPktsHi indicates the higher 32 bits of custIngQosPortIdArbitFwdPkts. |
| C32 custIngQosPortIdArbitFwdPktsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.3 | Counter32 | read-only | The value of custIngQosPortIdArbitFwdPktsLo indicates the lower 32 bits of custIngQosPortIdArbitFwdPkts. |
| TNA custIngQosPortIdArbitName | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1.1 | TNamedItem | not-accessible | The value of custIngQosPortIdArbitName is used as an index of the ingress QoS arbiter of this customer multi service site. |
| custIngQosPortIdArbitStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.17.1 | not-accessible | Each entry represents the ingress statistics about a specific customer multi service site ingress arbiter. | |
| custIngQosPortIdArbitStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.17 | not-accessible | The custIngQosPortIdArbitStatsTable contains ingress QoS arbiter statistics for the customer multi service site. | |
| TNA custIngQosPortIdSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.1 | TNamedItem | not-accessible | The value of custIngQosPortIdSchedName is used as an index of the ingress QoS scheduler of this customer multi service site. |
| custIngQosPortIdSchedStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1 | not-accessible | Each entry represents the ingress statistics about a specific customer multi service site ingress scheduler. Entries are created when a scheduler policy is applied to an MSS. | |
| custIngQosPortIdSchedStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.7 | not-accessible | The custIngQosPortIdSchedStatsTable contains ingress QoS scheduler statistics for the customer multi service site. | |
| C64 custIngQosPortSchedFwdOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.4 | Counter64 | read-only | The value of custIngQosPortSchedFwdOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngQosPortSchedFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.7.1.3 | Counter64 | read-only | The value of custIngQosPortSchedFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| TNA custIngQosSchedName | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1.1 | TNamedItem | not-accessible | The index of the ingress QoS scheduler of this customer multi service site. |
| C64 custIngQosSchedStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1.3 | Counter64 | read-only | The value of the object custIngQosSchedStatsForwardedOctets indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngQosSchedStatsForwardedPackets | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1.2 | Counter64 | read-only | The value of the object custIngQosSchedStatsForwardedPackets indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngSchedPlcyPortStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1.3 | Counter64 | read-only | The value of custIngSchedPlcyPortStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngSchedPlcyPortStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1.2 | Counter64 | read-only | The value of custIngSchedPlcyPortStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| TMN custIngSchedPlcyPortStatsPort | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1.1 | TmnxPortID | not-accessible | The value of custIngSchedPlcyPortStatsPort is used as an index of the ingress QoS scheduler of this customer multi service site. When an MSS assignment is an aps/ccag/lag in 'link' mode, each member-port of the aps/ccag/lag has its own scheduler. This object refers to the TmnxPortID of these member-ports. |
| C64 custIngSchedPlcyStatsFwdOct | 1.3.6.1.4.1.6527.3.1.2.4.1.11.1.2 | Counter64 | read-only | The value of the object custIngSchedPlcyStatsFwdOct indicates the number of forwarded octets, as determined by the customer multi service site ingress scheduler policy. |
| C64 custIngSchedPlcyStatsFwdPkt | 1.3.6.1.4.1.6527.3.1.2.4.1.11.1.1 | Counter64 | read-only | The value of the object custIngSchedPlcyStatsFwdPkt indicates the number of forwarded packets, as determined by the customer multi service site ingress scheduler policy. |
| TIM custLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.6 | TimeStamp | read-only | The value of the object custLastMgmtChange indicates the value of the object sysUpTime at the time of the most recent management-initiated change to this customer. |
| TNA custMssEgrQosArbitName | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.1 | TNamedItem | not-accessible | The value of custMssEgrQosArbitName is used as an index of the egress QoS arbiter of this customer multi service site. |
| custMssEgrQosArbitStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1 | not-accessible | Each entry represents the egress statistics about a specific customer multi service site egress arbiter. | |
| C64 custMssEgrQosArbitStatsFwdOcts | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.5 | Counter64 | read-only | The value of custMssEgrQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site egress arbiter policy. |
| C32 custMssEgrQosArbitStatsFwdOctsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.7 | Counter32 | read-only | The value of custMssEgrQosArbitStatsFwdOctsHi indicates the higher 32 bits of custMssEgrQosArbitStatsFwdOcts. |
| C32 custMssEgrQosArbitStatsFwdOctsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.6 | Counter32 | read-only | The value of custMssEgrQosArbitStatsFwdOctsLo indicates the lower 32 bits of custMssEgrQosArbitStatsFwdOcts. |
| C64 custMssEgrQosArbitStatsFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.2 | Counter64 | read-only | The value of custMssEgrQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site egress arbiter policy. |
| C32 custMssEgrQosArbitStatsFwdPktsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.4 | Counter32 | read-only | The value of custMssEgrQosArbitStatsFwdPktsHi indicates the higher 32 bits of custMssEgrQosArbitStatsFwdPkts. |
| C32 custMssEgrQosArbitStatsFwdPktsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.16.1.3 | Counter32 | read-only | The value of custMssEgrQosArbitStatsFwdPktsLo indicates the lower 32 bits of custMssEgrQosArbitStatsFwdPkts. |
| custMssEgrQosArbitStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.16 | not-accessible | The custMssEgrQosArbitStatsTable contains egress QoS arbiter statistics for the customer multi service site, organized by arbiter. | |
| custMssEgrQosSchedInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1 | not-accessible | Egrress statistics about a specific customer multi service site egress scheduler. | |
| custMssEgrQosSchedInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.1.10 | not-accessible | A table that contains egress QoS scheduler statistics for the customer multi service site. | |
| THP custMssEgrQosSCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.6 | THPolVirtualScheCIRRate | read-create | The value of custMssEgrQosSCIR specifies the desired CIR value for this virtual scheduler. |
| TIM custMssEgrQosSLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.3 | TimeStamp | read-only | The value of custMssEgrQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| TNA custMssEgrQosSName | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.1 | TNamedItem | not-accessible | The value of custMssEgrQosSName indicates the name of the virtual scheduler whose parameters are to be overridden. |
| TVI custMssEgrQosSOverrideFlags | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.4 | TVirtSchedAttribute | read-create | The value of custMssEgrQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy. |
| THP custMssEgrQosSPIR | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.5 | THPolVirtualSchePIRRate | read-create | The value of custMssEgrQosSPIR specifies the desired PIR value for this virtual scheduler. |
| ROW custMssEgrQosSRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.2 | RowStatus | read-create | The value of custMssEgrQosSRowStatus controls the creation and deletion of rows in this table. |
| T/F custMssEgrQosSSummedCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.10.1.7 | TruthValue | read-create | The value of custMssEgrQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssEgrQosSCIR) loses its meaning. |
| TNA custMssIngQosArbitName | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.1 | TNamedItem | not-accessible | The value of custMssIngQosArbitName is used as an index of the ingress QoS arbiter of this customer multi service site. |
| custMssIngQosArbitStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1 | not-accessible | Each entry represents the ingress statistics about a specific customer multi service site ingress arbiter. | |
| C64 custMssIngQosArbitStatsFwdOcts | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.5 | Counter64 | read-only | The value of custMssIngQosArbitStatsFwdOcts indicates the number of forwarded octets, as determined by the customer multi service site ingress arbiter policy. |
| C32 custMssIngQosArbitStatsFwdOctsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.7 | Counter32 | read-only | The value of custMssIngQosArbitStatsFwdOctsHi indicates the higher 32 bits of custMssIngQosArbitStatsFwdOcts. |
| C32 custMssIngQosArbitStatsFwdOctsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.6 | Counter32 | read-only | The value of custMssIngQosArbitStatsFwdOctsLo indicates the lower 32 bits of custMssIngQosArbitStatsFwdOcts. |
| C64 custMssIngQosArbitStatsFwdPkts | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.2 | Counter64 | read-only | The value of custMssIngQosArbitStatsFwdPkts indicates the number of forwarded packets, as determined by the customer multi service site ingress arbiter policy. |
| C32 custMssIngQosArbitStatsFwdPktsHi | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.4 | Counter32 | read-only | The value of custMssIngQosArbitStatsFwdPktsHi indicates the higher 32 bits of custMssIngQosArbitStatsFwdPkts. |
| C32 custMssIngQosArbitStatsFwdPktsLo | 1.3.6.1.4.1.6527.3.1.2.4.1.15.1.3 | Counter32 | read-only | The value of custMssIngQosArbitStatsFwdPktsLo indicates the lower 32 bits of custMssIngQosArbitStatsFwdPkts. |
| custMssIngQosArbitStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.15 | not-accessible | The custMssIngQosArbitStatsTable contains ingress QoS arbiter statistics for the customer multi service site, organized by arbiter. | |
| custMssIngQosSchedInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1 | not-accessible | Ingress statistics about a specific customer multi service site ingress scheduler. | |
| custMssIngQosSchedInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.1.9 | not-accessible | A table that contains ingress QoS scheduler statistics for the customer multi service site. | |
| THP custMssIngQosSCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.6 | THPolVirtualScheCIRRate | read-create | The value of custMssIngQosSCIR specifies the desired CIR value for this virtual scheduler. |
| TIM custMssIngQosSLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.3 | TimeStamp | read-only | The value of custMssIngQosSLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| TNA custMssIngQosSName | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.1 | TNamedItem | not-accessible | The value of custMssIngQosSName indicates the name of the virtual scheduler whose parameters are to be overridden. |
| TVI custMssIngQosSOverrideFlags | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.4 | TVirtSchedAttribute | read-create | The value of custMssIngQosSOverrideFlags specifies the set of attributes whose values have been overridden via management on this virtual scheduler. Clearing a given flag will return the corresponding overridden attribute to the value defined on the SAP's ingress scheduler policy. |
| THP custMssIngQosSPIR | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.5 | THPolVirtualSchePIRRate | read-create | The value of custMssIngQosSPIR specifies the desired PIR value for this virtual scheduler. |
| ROW custMssIngQosSRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.2 | RowStatus | read-create | The value of custMssIngQosSRowStatus controls the creation and deletion of rows in this table. |
| T/F custMssIngQosSSummedCIR | 1.3.6.1.4.1.6527.3.1.2.4.1.9.1.7 | TruthValue | read-create | The value of custMssIngQosSSummedCIR specifies if the CIR should be used as the summed CIR values of the children schedulers or queues. If set to 'true', the applicable scheduler CIR (custMssIngQosSCIR) loses its meaning. |
| custMultiServiceSiteEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1 | not-accessible | Information about a specific customer's multi-service site. | |
| custMultiServiceSiteTable | 1.3.6.1.4.1.6527.3.1.2.4.1.4 | not-accessible | ||
| custMultiSvcSiteEgrSchedPlcyPortStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.14.1 | not-accessible | Each entry represents the egress statistics about a specific customer multi service site egress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteEgrSchedPlcyPortStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.14 | not-accessible | The custMultiSvcSiteEgrSchedPlcyPortStatsTable contains egress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteEgrSchedPlcyStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.12.1 | not-accessible | Egress statistics about a specific customer multi service site egress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteEgrSchedPlcyStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.12 | not-accessible | A table that contains egress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteEgrStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.6.1 | not-accessible | Egress statistics about a specific customer multi service site egress scheduler. | |
| custMultiSvcSiteEgrStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.6 | not-accessible | A table that contains egress QoS scheduler statistics for the customer multi service site. | |
| custMultiSvcSiteIngSchedPlcyPortStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.13.1 | not-accessible | Each entry represents the ingress statistics about a specific customer multi service site ingress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteIngSchedPlcyPortStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.13 | not-accessible | The custMultiSvcSiteIngSchedPlcyPortStatsTable contains ingress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteIngSchedPlcyStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.11.1 | not-accessible | Ingress statistics about a specific customer multi service site egress scheduler. Entries are created when a scheduler policy of a MSS is replaced with another one due to Time-Of-Day policies. | |
| custMultiSvcSiteIngSchedPlcyStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.11 | not-accessible | A table that contains ingress QoS scheduler statistics for the customer multi service site, organized by scheduler policy. | |
| custMultiSvcSiteIngStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.1.5.1 | not-accessible | Ingress statistics about a specific customer multi service site ingress scheduler. | |
| custMultiSvcSiteIngStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.1.5 | not-accessible | A table that contains ingress QoS scheduler statistics for the customer multi service site. | |
| U32 custMultSvcSiteAssignment | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.5 | Unsigned32 | read-create | The value of the object custMultSvcSiteAssignment specifies the port ID, MDA, or card number, where the SAPs that are members of this Multi- Service Site are defined. |
| NTF custMultSvcSiteCreated | 1.3.6.1.4.1.6527.3.1.3.4.1.0.3 | The trap custMultSvcSiteCreated is sent when a new row is created in the custMultiServiceSiteTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| SER custMultSvcSiteCurrentEgrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.11 | ServObjName | read-only | The value of the object custMultSvcSiteCurrentEgrSchedPlcy indicates the Egress QoS scheduler on this SAP, or zero if none is currently active. The active policy may deviate from the sapEgressQosSchedulerPolicy in case it is overruled by a ToD-suite policy defined on this multi-service site. |
| SER custMultSvcSiteCurrentIngrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.10 | ServObjName | read-only | The value of the object custMultSvcSiteCurrentIngrSchedPlcy indicates the Ingress QoS scheduler on this multi-service Site, or zero if none is currently active. The active policy may deviate from custMultSvcSiteIngressSchedulerPolicy in case it is overruled by a ToD-suite policy defined on this multi-service site. |
| NTF custMultSvcSiteDeleted | 1.3.6.1.4.1.6527.3.1.3.4.1.0.4 | The trap custMultSvcSiteDeleted is sent when an existing row is deleted from the custMultiServiceSiteTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| SER custMultSvcSiteDescription | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.3 | ServObjDesc | read-create | The value of the object custMultSvcSiteDescription specifies option, generic information about this customer's Multi-Service Site. |
| TPO custMultSvcSiteEgressAggRateLimit | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.12 | TPortSchedulerPIR | read-create | The value of the object custMultSvcSiteEgressAggRateLimit specifies the maximum total rate of all egress queues for this multi-service site. The value '-1' means that there is no limit. |
| SER custMultSvcSiteEgressSchedulerPolicy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.7 | ServObjName | read-create | The value of the object custMultSvcSiteEgressSchedulerPolicy specifies the egress QoS scheduler policy assigned to this Multi-Service Site. |
| TNA custMultSvcSiteEgrPolcrCtrlPolcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.18 | TNamedItemOrEmpty | read-create | The value of the object custMultSvcSiteEgrPolcrCtrlPolcy specifies the egress QoS policer control policy assigned to this Multi-Service Site. |
| T/F custMultSvcSiteFrameBasedAccnt | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.15 | TruthValue | read-create | The value of custMultSvcSiteFrameBasedAccnt specifies whether to use frame-based accounting when evaluating custMultSvcSiteEgressAggRateLimit for the egress queues for this multi-service site. If the value is 'false', the default packet-based accounting method will be used. |
| TNA custMultSvcSiteIngPolcrCtrlPolcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.17 | TNamedItemOrEmpty | read-create | The value of the object custMultSvcSiteIngPolcrCtrlPolcy specifies the ingress QoS policer control policy assigned to this Multi-Service Site. |
| SER custMultSvcSiteIngressSchedulerPolicy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.6 | ServObjName | read-create | The value of the object custMultSvcSiteIngressSchedulerPolicy specifies the ingress QoS scheduler policy assigned to this Multi-Service Site. |
| SER custMultSvcSiteIntendedEgrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.14 | ServObjName | read-only | The value of the object custMultSvcSiteIntendedEgrSchedPlcy indicates indicates the Egress QoS scheduler on this multi-service Site that should be applied. If it deviates from custMultSvcSiteCurrentEgrSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using tod-suites for the SAP. When the tod-suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal. |
| SER custMultSvcSiteIntendedIngrSchedPlcy | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.13 | ServObjName | read-only | The value of the object custMultSvcSiteIntendedIngrSchedPlcy indicates indicates the Ingress QoS scheduler on this multi-service Site that should be applied. If it deviates from custMultSvcSiteCurrentIngrSchedPlcy, this means that there was a problem when trying to activate this filter. It can only deviate when using tod-suites for the SAP. When the tod-suites decides that a new filter must be applied, it will try to do this. If it fails, the current and intended field are not equal. |
| TIM custMultSvcSiteLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.8 | TimeStamp | read-only | The value of the object custMultSvcSiteLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this multi-service site. |
| TNA custMultSvcSiteName | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.1 | TNamedItem | read-only | |
| ROW custMultSvcSiteRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.2 | RowStatus | read-create | The value of the object custMultSvcSiteRowStatus specifies the status of this row. |
| INT custMultSvcSiteScope | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.4 | INTEGER | read-create | The value of the object custMultSvcSiteScope specifies the scope of the ingress and egress QoS scheduler policies assigned to this Multi-Service Site. When the value is 'port' all the SAPs that are members of this Multi-Service Site must be defined on the same port. Similarly for the case of'card'. |
| T/F custMultSvcSiteSubscriberMss | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.16 | TruthValue | read-create | The value of custMultSvcSiteSubscriberMss specifies whether this multi-service site will be used as the default multi-service site for subscribers linked to the port specified in custMultSvcSiteAssignment when the use-subscriber-mss flag is set on the subscriber's subscriber-profile. This field can only be set when the value of custMultSvcSiteScope is set to 'port(1)'. |
| TNA custMultSvcSiteTodSuite | 1.3.6.1.4.1.6527.3.1.2.4.1.4.1.9 | TNamedItemOrEmpty | read-create | The value of the object custMultSvcSiteTodSuite specifies the Time of Day (ToD) suite to be applied on this multi-service site. An empty string indicates that no ToD suite is applied on this multi-service Site. A set request will only be allowed, if the indicated suite is defined is TIMETRA-SCHEDULER-MIB::tmnxTodSuiteTable. Using a suite the values of custMultSvcSiteIngressSchedulerPolicy and custMultSvcSiteEgressSchedulerPolicy can be time based manipulated. |
| TMN custNextFreeId | 1.3.6.1.4.1.6527.3.1.2.4.1.2 | TmnxCustId | read-only | The value of the object custNextFreeId indicates the next available value for custId, the index for the custInfoTable. |
| I32 custNumEntriesEx | 1.3.6.1.4.1.6527.3.1.2.4.1.1 | Integer32 | read-only | The value of the object custNumEntries indicates the current number of customer records configured in this device. |
| SER custPhone | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.5 | ServObjDesc | read-create | The value of the object custPhone specifies the phone/pager number used to reach the primary contact person. |
| ROW custRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.1.3.1.2 | RowStatus | read-create | The value of the object custRowStatus specifies the status of this row. |
| custTraps | 1.3.6.1.4.1.6527.3.1.3.4.1.0 | |||
| custTrapsPrefix | 1.3.6.1.4.1.6527.3.1.3.4.1 | |||
| MAC hostConnectivityChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.29 | MacAddress | accessible-for-notify | The value of the object hostConnectivityChAddr indicates the client MAC address causing the trap. |
| IP hostConnectivityCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.28 | InetAddress | accessible-for-notify | The value of the object hostConnectivityCiAddr indicates the client INET address causing the trap. |
| IPt hostConnectivityCiAddrType | 1.3.6.1.4.1.6527.3.1.2.4.6.27 | InetAddressType | accessible-for-notify | The value of the object hostConnectivityCiAddrType indicates the client address type causing the trap. |
| iesGrpIfEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1 | not-accessible | Each row entry represents the attributes of a group interface. Entries are create/destroyed when entries in iesIfEntry with iesIfType 'group' are created/destroyed. | |
| T/F iesGrpIfOperUpWhileEmpty | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1.2 | TruthValue | read-write | The value of iesGrpIfOperUpWhileEmpty specifies the whether that operational status of the the IES group interface, as indicated by iesIfOperStatus, should have a value of 'up' even when there are no SAPs on the group interface. If the value of iesGrpIfOperUpWhileEmpty is 'true', the value of iesIfOperStatus for the IES group interface will be 'up' when there are no SAPs on the group interface. When the value of iesGrpIfOperUpWhileEmpty is 'false', the value of iesIfOperStatus will depend on the operational state of the SAPs on the group interface. The value of iesGrpIfOperUpWhileEmpty will be ignored when there are SAPs on the IES group interface. |
| TNA iesGrpIfPolicyControl | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1.3 | TNamedItemOrEmpty | read-write | The value of iesGrpIfPolicyControl specifies the name of the Policy Control policy for this group interface. For example: the value of this object can be set to the value of the object tmnxDiamPlcyName of a conceptual row in the TIMETRA-DIAMETER-MIB::tmnxDiameterPlcyTable. |
| NUM iesGrpIfRedInterface | 1.3.6.1.4.1.6527.3.1.2.4.2.21.1.1 | InterfaceIndexOrZero | read-write | The value of iesGrpIfRedInterface specifies the ifIndex of the redundant interface this group interface is tied to. The interface pointed to by this object must be of type 'redundant'. |
| iesGrpIfTable | 1.3.6.1.4.1.6527.3.1.2.4.2.21 | not-accessible | The iesGrpIfTable has entry for each group interface configured on this system. | |
| SER iesIfAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.5 | ServiceAdminStatus | read-create | The value of the object iesIfAdminStatus specifies the desired state of this IES interface. |
| T/F iesIfAllowUnmatchingSubnets | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.36 | TruthValue | read-create | The value of iesIfAllowUnmatchingSubnets specifies if subscriber hosts with a subnet that does not match any of the subnets configured on this interface, are allowed. This object is only relevant if the value of the object iesIfType in this conceptual row is equal to 'subscriber'; otherwise, 'false' is the only allowed value. The value of iesIfAllowUnmatchingSubnets can only be set to 'true' if the number of subnets (vRtrIpAddrTable) configured on this interface is between one and 255. The value of iesIfAllowUnmatchingSubnets can only be set to 'true' while in the corresponding conceptual row in the TIMETRA-VTR-MIB::vRtrIfTable the values of vRtrIfUnnumbered and vRtrIfUnnumberedIf are set to their default values. |
| NTF iesIfCreated | 1.3.6.1.4.1.6527.3.1.3.4.2.0.6 | The iesIfCreated notification is generated when a new row is created in the iesIfTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| TMN iesIfCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.9 | TmnxCustId | read-only | The value of the object iesIfCustId indicates the Customer ID of the associated IES service. |
| ADR iesIfDefaultPrimaryDnsIPv4Addr | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.28 | InetAddressIPv4 | read-create | The value of the object iesIfDefaultPrimaryDnsIPv4Addr specifies the IPv4 address of the default primary DNS server for the subscribers using this interface. Subscribers that cannot obtain an IPv4 DNS server addres by other means, can use this for DNS name resolution. The object iesIfDefaultPrimaryDnsIPv4Addr can only be set to a nonzero value if the value of iesIfType is 'subscriber'. |
| ADR iesIfDefaultPrimaryDnsIPv6Addr | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.30 | InetAddressIPv6 | read-create | The value of the object iesIfDefaultPrimaryDnsIPv6Addr specifies the IPv6 address of the default primary DNS server for the subscribers using this interface. Subscribers that cannot obtain an IPv6 DNS server addres by other means, can use this for DNS name resolution. The object iesIfDefaultPrimaryDnsIPv6Addr can only be set to a nonzero value if the value of iesIfType is 'subscriber'. |
| ADR iesIfDefaultSecondaryDnsIPv4Addr | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.29 | InetAddressIPv4 | read-create | The value of the object iesIfDefaultSecondaryDnsIPv4Addr specifies the IPv4 address of the default secondary DNS server for the subscribers using this interface. Subscribers that cannot obtain an IPv4 DNS server addres by other means, can use this for DNS name resolution. The object iesIfDefaultSecondaryDnsIPv4Addr can only be set to a nonzero value if the value of iesIfType is 'subscriber'. |
| ADR iesIfDefaultSecondaryDnsIPv6Addr | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.31 | InetAddressIPv6 | read-create | The value of the object iesIfDefaultSecondaryDnsIPv6Addr specifies the IPv6 address of the default primary DNS server for the subscribers using this interface. Subscribers that cannot obtain an IPv6 DNS server addres by other means, can use this for DNS name resolution. The object iesIfDefaultSecondaryDnsIPv6Addr can only be set to a nonzero value if the value of iesIfType is 'subscriber'. |
| U32 iesIfDelegatedPrefixLen | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.20 | Unsigned32 | read-create | The value of iesIfDelegatedPrefixLen specifies the number of bits that can be allocated to a Delegated Prefix for IPv6. |
| NTF iesIfDeleted | 1.3.6.1.4.1.6527.3.1.3.4.2.0.7 | The iesIfDeleted notification is sent when an existing row is deleted from the iesIfTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| SER iesIfDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.4 | ServObjLongDesc | read-create | The value of the object iesIfDescription specifies generic information about this IES interface. |
| iesIfEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1 | not-accessible | Information about a specific IES interface. | |
| TMN iesIfFwdServId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.17 | TmnxServId | read-create | The value of iesIfFwdServId specifies the forwarding service ID for a subscriber interface in a retailer context. This value can only be set at row creation time along with iesIfFwdSubIf, and it is only valid when iesIfType is 'subscriber'. The iesIfFwdServId MUST correspond to a service of type 'vprn'. |
| NUM iesIfFwdSubIf | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.18 | InterfaceIndexOrZero | read-create | The value of iesIfFwdSubIf specifies the forwarding subscriber interface for a subscriber interface in a retailer context. This value can only be set at row creation time along with iesIfFwdServId, and it is only valid when iesIfType is 'subscriber'. The interface pointed to by iesIfFwdSubIf MUST be of type 'subscriber' in the the service context defined by iesIfFwdServId. |
| INT iesIfGroupInterfaceType | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.37 | INTEGER | read-create | The value of iesIfGroupInterfaceType specifies the type of group interface, if the value of iesIfType is equal to 'group'. If the value of iesIfType is not equal to 'group', the value of this object can only be set to 'none'. The value of this object can only be set at row creation time. If this row is created with a value of iesIfType equal to 'group', the default value of this object is equal to 'plain'. 'none' - This is not a group interface. 'plain' - This is a plain group interface. 'lns' - This is an LNS group interface, used to terminate LNS (L2TP Network Server) PPP sessions. 'softGre' - This is a Soft GRE group interface, used to terminate Soft-GRE type DHCP sessions. |
| NUM iesIfIndex | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.1 | InterfaceIndex | read-only | The secondary index of the row in the vRtrIfTable corresponding to this IES interface. The primary index is 1; i.e. all IES interfaces are defined in the Base virtual router context. |
| T/F iesIfIPv6AllowUnmatchingPfxs | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.40 | TruthValue | read-create | The value of iesIfIPv6AllowUnmatchingPfxs specifies if subscriber hosts with a prefix that does not match any of the prefixes configured on this interface, are allowed. This object is only relevant if the value of the object iesIfType in this conceptual row is equal to 'subscriber'; otherwise, 'false' is the only allowed value. The value of iesIfIPv6AllowUnmatchingPfxs can only be set to 'true' if the number of prefixes (vRtrIpAddrTable) configured on this interface is between one and 254. |
| T/F iesIfIPv6ConfigAllowed | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.32 | TruthValue | read-create | The value of iesIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured. The object iesIfIPv6ConfigAllowed can only be set if the value of iesIfType is 'subscriber' or 'group'. |
| T/F iesIfIPv6IpoeBridgedModeEnabled | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.39 | TruthValue | read-create | The value of iesIfIPv6IpoeBridgedModeEnabled specifies whether IPv6 IPoE Bridged Mode is enabled or not. If the value of iesIfType is not equal to 'group', the value of this object cannot be set to 'true'. |
| IP iesIfIsaTnlNHDynAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.138.1.5 | InetAddress | read-write | The value of iesIfIsaTnlNHDynAddr specifies the IP address of the redundant next-hop for dynamic ISA tunnels on this interface. |
| IPt iesIfIsaTnlNHDynAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.138.1.4 | InetAddressType | read-write | The value of iesIfIsaTnlNHDynAddrType specifies the address type of iesIfIsaTnlNHStaticAddr object. |
| iesIfIsaTnlNHEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.138.1 | not-accessible | The iesIfIsaTnlNHEntry contains IES service ISA tunnel next-hop information per service interface. | |
| TIM iesIfIsaTnlNHLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.138.1.1 | TimeStamp | read-only | The value of iesIfIsaTnlNHLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| IP iesIfIsaTnlNHStaticAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.138.1.3 | InetAddress | read-write | The value of iesIfIsaTnlNHStaticAddr specifies the IP address of the redundant next-hop for static ISA tunnels on this interface. |
| IPt iesIfIsaTnlNHStaticAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.138.1.2 | InetAddressType | read-write | The value of iesIfIsaTnlNHStaticAddrType specifies the address type of iesIfIsaTnlNHStaticAddr object. |
| iesIfIsaTnlNHTable | 1.3.6.1.4.1.6527.3.1.2.4.2.138 | not-accessible | The iesIfIsaTnlNHTable contains entries for IES interface ISA tunnel next-hop information in an IES service context. | |
| TIM iesIfIsaTnlNHTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.137 | TimeStamp | read-only | The value of iesIfIsaTnlNHTableLastChanged indicates the sysUpTime at the time of the last modification of iesIfIsaTnlNHTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM iesIfLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.7 | TimeStamp | read-only | The value of the object iesIfLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this IES interface. |
| TIM iesIfLastStatusChange | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.11 | TimeStamp | read-only | The value of the object iesIfLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his interface. |
| T/F iesIfLns | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.21 | TruthValue | read-create | The value of iesIfLns specifies whether this interface can be used to terminate LNS (L2TP Network Server) PPP sessions. The value of this object can only be set to 'true' at row creation time, and is only valid when iesIfType is 'group'. This object is supported for backwards compatibility only; the recommended way to create LNS group interfaces is by means of the iesIfGroupInterfaceType object. |
| T/F iesIfLoopback | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.10 | TruthValue | read-create | When the value of iesIfLoopback is set to 'true', loopback is enabled on the IES interface represented by this row entry. When the value is 'false', loopback is disabled. |
| TNA iesIfMonitorOperGrp | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.35 | TNamedItemOrEmpty | read-create | The value of the iesIfMonitorOperGrp specifies the Operational-Group identifier which will affect the state of this interface. |
| TNA iesIfName | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.3 | TNamedItem | read-create | The value of the object iesIfName specifies the name used to refer to this IES interface. This name must be unique within the Base virtual router context. This object must be specified when the row is created, and cannot be changed while the rowstatus is 'active'. |
| SER iesIfOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.6 | ServiceOperStatus | read-only | The value of the object iesIfOperStatus indicates the operating state of this IES interface. |
| NUM iesIfParentIf | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.13 | InterfaceIndexOrZero | read-create | The value of iesIfParentIf specifies the ifIndex of this interface's parent. This value can only be set at row creation time, and is only valid when iesIfType is 'group'. The interface pointed to by iesIfParentIf must be of type 'subscriber'. |
| T/F iesIfPrivateRetailSubnets | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.19 | TruthValue | read-create | The value of iesIfPrivateRetailSubnets specifies whether or not overlapping Ip address may exist between different retailers referring to this interface. |
| ROW iesIfRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.2 | RowStatus | read-create | The value of the object iesIfRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. |
| TPO iesIfSapEgressQosId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.27 | TPolicyID | read-create | The value of the object iesIfSapEgressQosId specifies the QoS policy ID which is used to reclassify IP packets on the egress side of the SAPs associated with the VPLS service on this interface. When set to the default value, this object specifies that the IP packets will not be reclassified on the egress SAPs of the VPLS service attached to the IP interface. |
| INT iesIfShcvAction | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.15 | INTEGER | read-create | The value of iesIfShcvAction specifies the action to be taken for hosts on this interface whose host connectivity checking fails |
| INT iesIfShcvFamily | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.38 | INTEGER | read-create | The value of the object iesIfShcvFamily specifies for which host IP family the connectivity is checked. If the value of iesIfType is not equal to 'group', the value of this object can only be set to 'ipv4'. |
| U32 iesIfShcvInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.16 | Unsigned32 | read-create | The value of the object iesIfShcvInterval specifies the interval in minutes between connectivity checks. Zero means no in host-connection-verify |
| U32 iesIfShcvRetryCount | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.26 | Unsigned32 | read-create | The value of the object iesIfShcvRetryCount specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each interval, and (n+1) missed replies are considered as a connectivity failure. |
| U32 iesIfShcvRetryTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.25 | Unsigned32 | read-create | The value of the object iesIfShcvRetryTimeout specifies the timeout in seconds before a connectivity check retransmission. |
| INT iesIfShcvSource | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.14 | INTEGER | read-create | The value of iesIfShcvSource specifies the source used for subscriber host connectivity checking |
| T/F iesIfSrrpRoutingEnabled | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.33 | TruthValue | read-create | The value of iesIfSrrpRoutingEnabled specifies whether SRRP state monitoring for subscriber-management routes and managed routes on this group interface is enabled or not. A value 'true' means monitoring is enabled, a value 'false' means monitoring is disabled. |
| U32 iesIfSrrpRoutingHoldTime | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.34 | Unsigned32 | read-create | The value of iesIfSrrpRoutingHoldTime specifies the delay before updating the route state after the last SRRP transition. |
| NTF iesIfStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.8 | The iesIfStatusChanged notification is generated when there is a change in the administrative or operating status of an IES interface. | ||
| iesIfTable | 1.3.6.1.4.1.6527.3.1.2.4.2.5 | not-accessible | A table that contains IES interface information. | |
| INT iesIfType | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.12 | INTEGER | read-create | The value of iesIfType specifies the type of this IES interface. This object can only be set at row creation time. 'service' - This is a normal IES interface. 'subscriber' - This is a subscriber interface, under which multiple group interfaces can be configured. 'group' - This is a group interface, belonging to a parent subscriber interface. 'redundant' - This is a redundant interface, used for dual homing. 'cem' - This is a CEM interface, used for IP/UDP encapsulated CEM IES interface. 'ipsec' - This is an IPsec interface, used for IPsec tunneling. 'ipMirror' - This is an IP interface, used for IP Mirroring. 'video' - This is a video IP interface. 'aarp' - This is an AARP interface, used for asymmetry removal. |
| STR iesIfVplsFailedReason | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.24 | DisplayString | read-only | The value of the object iesIfVplsFailedReason specifies the reason when the value of iesIfVplsStatus is 'down'. |
| TLN iesIfVplsName | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.22 | TLNamedItemOrEmpty | read-create | The value of the object iesIfVplsName specifies the name of the VPLS service associated this interface. |
| SER iesIfVplsStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.23 | ServiceOperStatus | read-only | The value of the object iesIfVplsStatus indicates the operational status of the VPLS service on this interface. |
| VPN iesIfVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.5.1.8 | VpnId | read-only | The value of the object iesIfVpnId indicates the VPN ID of the associated IES service. |
| MAC macPinningMacAddress | 1.3.6.1.4.1.6527.3.1.2.4.6.1 | MacAddress | accessible-for-notify | The value of the object macPinningMacAddress indicates the pinned MAC address. |
| NUM macPinningPinnedRow | 1.3.6.1.4.1.6527.3.1.2.4.6.2 | RowPointer | accessible-for-notify | The value of the object macPinningPinnedRow indicates where the MAC address is currently pinned on. Its value will be the OID of the first accessible object in the row of the sapTlsInfoTable or in the sdpBindTable, depending on whether the MAC address is pinned on a SAP or a SDP Bind. |
| STR macPinningPinnedRowDescr | 1.3.6.1.4.1.6527.3.1.2.4.6.3 | DisplayString | accessible-for-notify | The value of the object macPinningPinnedRowDescr indicates where the MAC address is currently pinned on. The value will either be a SAP-id or a SDP id, presented in readable format, depending on whether the MAC is pinned to a SAP or a SDP. |
| NUM macPinningViolatingRow | 1.3.6.1.4.1.6527.3.1.2.4.6.4 | RowPointer | accessible-for-notify | The value of the object macPinningViolatingRow indicates where the MAC address relearn attempt was detected. Its value will be the OID of the first accessible object in the row of the sapTlsInfoTable or in the sdpBindTable, depending on whether the MAC address is pinned on a SAP or a SDP Bind. |
| STR macPinningViolatingRowDescr | 1.3.6.1.4.1.6527.3.1.2.4.6.5 | DisplayString | accessible-for-notify | The value of the object macPinningViolatingRowDescr indicates where the MAC address relearn attempt was detected. The value will either be a SAP-id or a SDP id, presented in readable format, depending on whether the MAC address relearn attempt was detected on a SAP or a SDP. |
| NTF newRootBridge | 1.3.6.1.4.1.6527.3.1.3.4.5.0.7 | The newRootBridge notification is generated when this bridge has been elected as the new root bridge. A new root bridge creates a new spanning tree topology and may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF newRootVcpState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.4 | The newRootVcpState notification is generated when the previous root bridge has been aged out and a new root bridge has been elected. The new root bridge creates a new spanning tree topology and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF pipActiveProtocolChange | 1.3.6.1.4.1.6527.3.1.3.4.5.0.42 | The pipActiveProtocolChange notification is generated when the spanning tree protocol on this PIP Uplink changes from rstp to stp or vice-versa. No recovery is needed. | ||
| MAC protectedMacForNotify | 1.3.6.1.4.1.6527.3.1.2.4.6.30 | MacAddress | accessible-for-notify | The value of the object protectedMacForNotify indicates the protected MAC address that was received, causing the sapReceivedProtSrcMac notification. |
| STR staticHostDynamicMacConflict | 1.3.6.1.4.1.6527.3.1.2.4.6.32 | DisplayString | accessible-for-notify | The value of the object staticHostDynamicMacConflict indicates the reason causing the sapStaticHostDynMacConflict notification. |
| IP staticHostDynamicMacIpAddress | 1.3.6.1.4.1.6527.3.1.2.4.6.31 | IpAddress | accessible-for-notify | The value of the object staticHostDynamicMacIpAddress indicates the IP address of the static host for which the sapStaticHostDynMacConflict notification is generated. |
| SER svcAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.8 | ServiceAdminStatus | read-create | The value of the object svcAdminStatus specifies the desired state of this service. |
| svcApipeInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.7.1 | not-accessible | APIPE specific information about a service. | |
| svcApipeInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.7 | not-accessible | A table that contains APIPE service information. | |
| INT svcApipeInterworking | 1.3.6.1.4.1.6527.3.1.2.4.2.7.1.1 | INTEGER | read-write | The value of the object svcApipeInterworking specifies the interworking function that should be applied for packets that ingress/egress SAPs that are part of a APIPE service. |
| INT svcApipeSignaledVllTypeOverride | 1.3.6.1.4.1.6527.3.1.2.4.2.7.1.2 | INTEGER | read-write | The value of object svcApipeSignaledVllTypeOverride specifies the type of pseudo-wire (PW) signaling configured to override the PW signaling specified by object svcVllType for the APIPE VLL service. Value 'none(0)' specifies that there is no configured override of the PW signaling for the APIPE VLL service. Value 'atmVcc(8)' specifies that the configured PW signaling for override is of type '0x0009 N:1 VCC cell' within an APIPE VLL service. Value 'atmVcc(8)' is allowed only if all of the following conditions have been met: 1) An ATM SAP associated with the APIPE VLL service has an assigned connection profile, found in TIMETRA-CONN-PROF-MIB::tmnxConnProfTable. 2) svcVllType is equal to 'atmCell(7)'. 3) svcVcSwitching is equal to 'false'. Otherwise, an 'inconsistentValue' error is returned. If the above 3 conditions are satisfied, svcApipeSignaledVllTypeOverride is set to 'atmVcc(8)' and the ATM service is operational, the override is triggered. |
| STR svcArpHostAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.21 | TmnxAncpStringOrZero | read-only | The object svcArpHostAncpString indicates the value of the ANCP-string received from the RADIUS server. |
| STR svcArpHostAppProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.20 | TmnxAppProfileStringOrEmpty | read-only | The value of svcArpHostAppProfString indicates the application profile string applicable for this ARP host. |
| TNA svcArpHostBgpAuthKeyChain | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.2 | TNamedItemOrEmpty | read-only | The value of svcArpHostBgpAuthKeyChain indicates the keychain which is used to sign and/or authenticate the BGP protocol stream. |
| svcArpHostBgpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1 | not-accessible | Each row entry contains parameters used for BGP. | |
| TPO svcArpHostBgpExportPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.5 | TPolicyStatementNameOrEmpty | read-only | The value of svcArpHostBgpExportPolicy indicates the export policy. |
| TPO svcArpHostBgpImportPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.4 | TPolicyStatementNameOrEmpty | read-only | The value of svcArpHostBgpImportPolicy indicates the import policy. |
| OCT svcArpHostBgpMD5AuthKey | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.3 | OCTET STRING | read-only | The value of svcArpHostBgpMD5AuthKey indicates the authentication key used between BGP peers before establishing sessions. Authentication is done using the MD-5 message based digest protocol. |
| INE svcArpHostBgpPeerAS | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.6 | InetAutonomousSystemNumber | read-only | The value of svcArpHostBgpPeerAS indicates the Autonomous System number for the remote peer. |
| BGP svcArpHostBgpPeeringStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.7 | BgpPeeringStatus | read-only | The value of svcArpHostBgpPeeringStatus indicates the status of the BGP peering session. |
| TNA svcArpHostBgpPrngPlcyName | 1.3.6.1.4.1.6527.3.1.2.4.2.55.1.1 | TNamedItemOrEmpty | read-only | The value of svcArpHostBgpPrngPlcyName indicates the peering policy which is used to set up the BGP peer for this ARP host. |
| svcArpHostBgpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.55 | not-accessible | The svcArpHostBgpTable augments the svcArpHostTable. This table contains the parameters used for BGP. | |
| TNA svcArpHostCategoryMapName | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.27 | TNamedItemOrEmpty | read-only | The object svcArpHostCategoryMapName indicates the value of the category map name received from the RADIUS server. |
| U32 svcArpHostDefaultSessionTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.48 | Unsigned32 | read-only | The value of svcArpHostDefaultSessionTimeout indicates the default value of the ARP host session timeout. This default value is used if no value was specified, for instance by the Radius server. |
| svcArpHostEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1 | not-accessible | Information about a specific ARP host. | |
| TMN svcArpHostIfAdminState | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1.2 | TmnxAdminState | read-write | The value of the object svcArpHostIfAdminState specifies the administrative state of the ARP host functionality on this IES interface. The default value of this object is equal to 'outOfService', except for a retailer interface, where it is 'inService'. |
| svcArpHostIfEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1 | not-accessible | ARP host specific information about an IES interface. | |
| TIM svcArpHostIfLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1.1 | TimeStamp | read-only | The value of svcArpHostIfLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| U32 svcArpHostIfMaxNumHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1.3 | Unsigned32 | read-write | The value of svcArpHostIfMaxNumHosts specifies the maximum number of ARP hosts allowed on this IES interface. The default value of this object is equal to '1' except for a retailer interface, where it is '32767'. |
| U32 svcArpHostIfMaxNumHostsSap | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1.4 | Unsigned32 | read-write | The value of svcArpHostIfMaxNumHosts specifies the maximum number of ARP hosts per SAP allowed on this IES interface. The value of this object is not relevant in case of a retailer interface. In other cases, the default value is equal to '1'. |
| U32 svcArpHostIfMinAuthInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1.5 | Unsigned32 | read-write | The value of svcArpHostIfMinAuthInterval specifies the minimum interval between two consecutive authentication attempts for the same ARP host. The value of this object is not relevant in case of a retailer interface. In other cases, the default value is equal to '15'. |
| G32 svcArpHostIfNumHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.47.1.6 | Gauge32 | read-only | The value of svcArpHostIfNumHosts indicates the actual number of ARP hosts on this IES interface. |
| svcArpHostIfTable | 1.3.6.1.4.1.6527.3.1.2.4.2.47 | not-accessible | A table that contains IES interface ARP host configuration information. A row is automatically created in the svcArpHostIfTable for an entry in the iesIfTable where either the value of the object iesIfType - is equal to 'group (3)' and the value of the object iesIfGroupInterfaceType is equal to 'plain' or 'lns', or - equal to 'subscriber (2)' while the value of the objects iesIfFwdServId and iesIfFwdSubIf are not equal to zero. The first case is referred to as 'group interface' and the second as 'retailer interface'. | |
| TIM svcArpHostIfTableLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.46 | TimeStamp | read-only | The value of svcArpHostIfTableLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to the svcArpHostIfTable. |
| NUM svcArpHostInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.22 | TmnxSubMgtIntDestIdOrEmpty | read-only | The object svcArpHostInterDestId indicates the intermediate destination identifier received from the RADIUS server. |
| IP svcArpHostIpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.2 | InetAddress | not-accessible | The value of svcArpHostIpAddr indicates the IP address of the ARP host. |
| IPt svcArpHostIpAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.1 | InetAddressType | not-accessible | The value of svcArpHostIpAddrType indicates the address type of svcArpHostIpAddr. |
| DAT svcArpHostLastAuth | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.10 | DateAndTime | read-only | The value of svcArpHostLastAuth indicates the time of the last authentication. |
| SER svcArpHostLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.3 | ServAccessLocation | read-only | The value of svcArpHostLocale indicates if the ARP Host is learned via a SAP or spoke SDP. |
| MAC svcArpHostMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.25 | MacAddress | read-only | The value of svcArpHostMacAddr indicates the MAC address of this ARP host. |
| IP svcArpHostMRtAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.54.1.2 | InetAddress | not-accessible | The value of svcArpHostMRtAddr indicates the IP address of the managed route. |
| IPt svcArpHostMRtAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.54.1.1 | InetAddressType | not-accessible | The value of svcArpHostMRtAddrType indicates the address type of svcArpHostMRtAddr. |
| svcArpHostMRtEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.54.1 | not-accessible | Each row entry represents information on a specific managed route. | |
| ADR svcArpHostMRtPrefixLen | 1.3.6.1.4.1.6527.3.1.2.4.2.54.1.3 | InetAddressPrefixLength | not-accessible | The value of svcArpHostMRtPrefixLen indicates the prefix length of the subnet associated with svcArpHostMRtAddr. |
| TMN svcArpHostMRtStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.54.1.4 | TmnxManagedRouteStatus | read-only | The value of svcArpHostMRtStatus indicates the state of this managed route. |
| svcArpHostMRtTable | 1.3.6.1.4.1.6527.3.1.2.4.2.54 | not-accessible | The svcArpHostMRtTable contains managed routes of ARP hosts. Entries in this table are created automatically by the system. | |
| ARP svcArpHostOriginStrings | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.31 | ArpHostInfoOrigin | read-only | The value of svcArpHostOriginStrings indicates which server provided the Sub-profile, SLA profile, Ancp string and Intermediate Destination Id. |
| ARP svcArpHostOriginSubscrId | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.30 | ArpHostInfoOrigin | read-only | The value of svcArpHostOriginSubscrId indicates which source provided the subscriber-id. |
| TBU svcArpHostOvrCBS | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.7 | TBurstSizeBytesOverride | read-only | The value of svcArpHostOvrCBS indicates the amount of reserved buffer space (in bytes) for the object overridden by this row. |
| TCI svcArpHostOvrCIR | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.6 | TCIRRateOverride | read-only | The value of svcArpHostOvrCIR indicates the CIR rate in kbps allowed for the object overridden by this row. |
| TDI svcArpHostOvrDirection | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.1 | TDirection | not-accessible | The value of svcArpHostOvrDirection indicates if this row specifies ingress or egress qos override parameters. |
| svcArpHostOvrEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1 | not-accessible | Each conceptual row represents QoS overrides information of an ARP Host. | |
| TBU svcArpHostOvrMBS | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.8 | TBurstSizeBytesOverride | read-only | The value of svcArpHostOvrMBS indicates the maximum amount of reserved buffer space (in bytes) for the object overridden by this row. |
| TPI svcArpHostOvrPIR | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.5 | TPIRRateOverride | read-only | The value of svcArpHostOvrPIR indicates the PIR rate in kbps allowed for the object overridden by this row. |
| svcArpHostOvrTable | 1.3.6.1.4.1.6527.3.1.2.4.2.136 | not-accessible | The svcArpHostOvrTable contains QoS (Quality of Service) overrides for ARP hosts. Entries in this table are created and destroyed by the system. This table is a sparse augment of the svcArpHostTable: entries are created only for ARH hosts for which QoS overrides information is available. | |
| TQO svcArpHostOvrType | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.2 | TQosOverrideType | not-accessible | The value of svcArpHostOvrType indicates what field has been overridden by this row. |
| I32 svcArpHostOvrTypeId | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.3 | Integer32 | not-accessible | The value of svcArpHostOvrTypeId indicates the ID of the queue/policer that has been overridden by this row. If the value of svcArpHostOvrType is not 'queue (1)' or 'policer (2)', this field must be set to zero (0). |
| TNA svcArpHostOvrTypeName | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.4 | TNamedItemOrEmpty | not-accessible | The value of svcArpHostOvrTypeName indicates the name of the scheduler/arbiter that has been overridden by this row. If the value of svcArpHostOvrType is not 'arbiter (4)' or 'scheduler (5)', this field must be set to zero (0). |
| THS svcArpHostOvrWrrWeight | 1.3.6.1.4.1.6527.3.1.2.4.2.136.1.9 | THsmdaWrrWeightOverride | read-only | The value of svcArpHostOvrWrrWeight specifies the weight of this queue for the HSMDA scheduler. The weight determines how much bandwidth this queue gets out of the total rate for the scheduling class. The value of svcArpHostOvrWrrWeight is only relevant if the value of svcArpHostOvrType is equal to 'queue', and if the queue specified in svcArpHostOvrTypeId is referenced in the value of TIMETRA-QOS-MIB::tHsmdaWrrPolicyIncludeQueues of the Weighted Round Robin policy associated with this ARP Host. |
| U32 svcArpHostPersistKey | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.26 | Unsigned32 | read-only | The value of svcArpHostPersistKey indicates a key value that can be used to track this ARP host in the persistence file. |
| NTF svcArpHostPopulateErr | 1.3.6.1.4.1.6527.3.1.3.4.2.0.27 | The svcArpHostPopulateErr notification indicates that the system failed to update the ARP Host table with the information contained in the ARP message. | ||
| STR svcArpHostPopulateError | 1.3.6.1.4.1.6527.3.1.2.4.6.46 | DisplayString | accessible-for-notify | The value of the object svcArpHostPopulateError indicates the reason why the system failed to update the ARP Host table upon reception of an ARP message. |
| OCT svcArpHostRadiusClassAttr | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.28 | OCTET STRING | read-only | The value of svcArpHostRadiusClassAttr indicates the Class attribute returned by the RADIUS server in an Access-Accept message. If no RADIUS authentication is performed for this ARP host, or RADIUS did not return this attribute, the value of this object is empty. |
| STR svcArpHostRadiusUserName | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.29 | DisplayString | read-only | The value of svcArpHostRadiusUserName indicates the User-Name attribute returned by the RADIUS server in an Access-Accept message. If RADIUS did not return this attribute, the value of this object is equal to the User-Name attribute sent in the original Access-Request message. If no RADIUS authentication is performed for this ARP host, the value of this object is empty. |
| DAT svcArpHostRefresh | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.11 | DateAndTime | read-only | The value of svcArpHostRefresh indicates the time of the last refresh of this ARP host. Note that not every refresh requires authentication. |
| U32 svcArpHostRemainingTime | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.12 | Unsigned32 | read-only | The value of svcArpHostRemainingTime indicates the remaining time of this ARP host. |
| NUM svcArpHostRetailerIf | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.24 | InterfaceIndexOrZero | read-only | The value of svcArpHostRetailerIf indicates the interface index of the retailer VPRN interface to which this ARP host belongs. When this object is non zero, the ARP host belongs to a retailer VPRN. |
| TMN svcArpHostRetailerSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.23 | TmnxServId | read-only | The value of svcArpHostRetailerSvcId indicates the service ID of the retailer VPRN service to which this ARP host belongs. When this object is non zero, the ARP host belongs to a retailer VPRN. |
| TMN svcArpHostSapEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.5 | TmnxEncapVal | read-only | When the value of svcArpHostLocale is 'sap', the object svcArpHostSapPortId along with the object svcArpHostSapEncapValue, indicates the SAP where this ARP host is learned. This object is otherwise insignificant and contains the value 0. |
| TMN svcArpHostSapPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.4 | TmnxPortID | read-only | When the value of svcArpHostLocale is 'sap', the object svcArpHostSapPortId along with the object svcArpHostSapEncapValue, indicates the SAP where this ARP host is learned. This object is otherwise insignificant and contains the value 0. |
| SDP svcArpHostSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.6 | SdpId | read-only | When the value of svcArpHostLocale is 'sdp', the object svcArpHostSdpId, along with the object svcArpHostVcId, indicates the SDP Binding where this ARP host is learned. This object is otherwise insignificant and contains the value 0. |
| U32 svcArpHostSessionTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.8 | Unsigned32 | read-only | The value of svcArpHostSessionTimeout indicates the session timeout of this ARP host. The session timeout can be configured in the Radius server. If no session timeout is specified, its value is equal to the value of the object svcArpHostDefaultSessionTimeout. |
| U32 svcArpHostShcvChecks | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.14 | Unsigned32 | read-only | The value of svcArpHostShcvChecks indicates the number of host connectivity check requests for this ARP host. |
| SER svcArpHostShcvOperState | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.13 | ServShcvOperState | read-only | The value of svcArpHostShcvOperState indicates the state of the subscriber host connectivity check for this ARP host. |
| U32 svcArpHostShcvReplies | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.15 | Unsigned32 | read-only | The value of svcArpHostShcvReplies indicates the number of host connectivity replies for this ARP host. |
| TIM svcArpHostShcvReplyTime | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.16 | TimeStamp | read-only | The value of svcArpHostShcvReplyTime indicates the time of the last successful host connectivity check for this ARP host. |
| STR svcArpHostSlaProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.19 | TmnxSlaProfileStringOrEmpty | read-only | The value of svcArpHostSlaProfString indicates the SLA profile string applicable for this ARP host. |
| DAT svcArpHostStart | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.9 | DateAndTime | read-only | The value of svcArpHostStart indicates the time of the creation of this entry. |
| STR svcArpHostSubProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.18 | TmnxSubProfileStringOrEmpty | read-only | The value of svcArpHostSubProfString indicates the subscriber profile string applicable for this ARP host. |
| STR svcArpHostSubscrIdent | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.17 | TmnxSubIdentStringOrEmpty | read-only | The value of svcArpHostSubscrIdent indicates the id of the parent subscriber of this ARP host. |
| svcArpHostTable | 1.3.6.1.4.1.6527.3.1.2.4.2.45 | not-accessible | A table that contains ARP hosts. | |
| TIM svcArpHostTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.44 | TimeStamp | read-only | The value of svcArpHostTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the svcArpHostTable. If there were no changes in the table since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcArpHostVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.45.1.7 | Unsigned32 | read-only | When the value of svcArpHostLocale is 'sdp', the object svcArpHostVcId, along with the object svcArpHostSdpId, indicates the SDP Binding where this ARP host is learned. This object is otherwise insignificant and contains the value 0. |
| INT svcAutoBind | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.16 | INTEGER | read-create | The value of the object svcAutoBind specifies, for a VPRN service, the type of lookup to be used by the routing instance if no SDP to the destination exists. |
| svcBaseInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1 | not-accessible | Basic information about a specific service. | |
| svcBaseInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.2 | not-accessible | A table that contains basic service information. | |
| TMN svcBgpVplsAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1.4 | TmnxEnabledDisabled | read-create | The value of svcBgpVplsAdminStatus specifies the administrative state of the vpls-edge instance associated with this service. |
| svcBgpVplsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1 | not-accessible | Information about BGP-VPLS feature for a specific service. | |
| TIM svcBgpVplsLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1.2 | TimeStamp | read-only | The value of svcBgpVplsLastChanged indicates the timestamp of last change to this row in svcBgpVplsTable. |
| I32 svcBgpVplsMaxVeId | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1.3 | Integer32 | read-create | The value of the svcBgpVplsMaxVeId specifies the value of vpls-edge-range for this service. |
| ROW svcBgpVplsRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1.1 | RowStatus | read-create | The value of svcBgpVplsRowStatus is used for the creation and deletion of rows in this table. |
| svcBgpVplsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.79 | not-accessible | This table maintains the information about BGP-VPLS feature information for a service. | |
| TIM svcBgpVplsTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.78 | TimeStamp | read-only | The value of svcBgpVplsTblLastChanged indicates the sysUpTime at the time of the last modification of svcBgpVplsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcBgpVplsVeId | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1.6 | TmnxSiteId | read-create | The value of svcBgpVplsVeId specifies the identifier for the vpls-edge in this service. The svcBgpVplsVeId is a two bytes identifier that represents the local bridging instance in a VPLS and is advertised through the BGP Network Layer Reachability Information (NLRI). An 'inconsistentValue' error is returned if value of svcBgpVplsVeId is set to the value of svcBgpVplsMaxVeId or lower. An 'inconsistentError' is returned if this object is set to non-default value when svcBgpVplsVeName is set to its default value. |
| TNA svcBgpVplsVeName | 1.3.6.1.4.1.6527.3.1.2.4.2.79.1.5 | TNamedItemOrEmpty | read-create | The value of svcBgpVplsVeName specifies the name for the specific vpls-edge. |
| NTF svcCreated | 1.3.6.1.4.1.6527.3.1.3.4.2.0.1 | This trap is sent when a new row is created in the svcBaseInfoTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| L2R svcCreationOrigin | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.34 | L2RouteOrigin | read-only | The value of svcCreationOrigin indicates the protocol or mechanism which created this service. |
| TMN svcCtrlSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.33 | TmnxServId | read-only | The value of the object svcCtrlSvcId indicates the Service identifier of the service controlling this service. A value of '0' indicates that this service is not controlled by another service. |
| TMN svcCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.4 | TmnxCustId | read-create | The value of the object svcCustId specifies the ID of the customer who owns this service. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| U32 svcDefMeshVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.13 | Unsigned32 | read-create | The value of the object svcDefMeshVcId specifies, only in services that accept mesh SDP bindings, the VC ID portion of the sdpBindId index of each mesh SDP binding defined in the service. The default value of this object is equal to the service ID. |
| NTF svcDeleted | 1.3.6.1.4.1.6527.3.1.3.4.2.0.2 | This trap is sent when an existing row is deleted from the svcBaseInfoTable. The object is obsoleted and replaced with tmnxConfigModify notification. | ||
| SER svcDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.6 | ServObjDesc | read-create | The value of the object svcDescription specifiers an optional, generic information about this service. |
| I32 svcDhcpClientLease | 1.3.6.1.4.1.6527.3.1.2.4.6.24 | Integer32 | accessible-for-notify | The value of the object svcDhcpClientLease indicates the lease time specified in the DHCP PDU causing the trap. |
| STR svcDhcpCoAError | 1.3.6.1.4.1.6527.3.1.2.4.6.38 | DisplayString | accessible-for-notify | The value of the object svcDhcpCoAError indicates the reason why the node failed to process a Change of Authorization (CoA) request from a Radius server. |
| svcDhcpLeaseActionEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.92.1 | not-accessible | Each row entry contains parameters that allow to perform an action on the corresponding lease-state. | |
| svcDhcpLeaseActionTable | 1.3.6.1.4.1.6527.3.1.2.4.2.92 | not-accessible | The svcDhcpLeaseActionTable augments the svcDhcpLeaseTable. The table allows the operator to perform actions on the lease state. | |
| TMN svcDhcpLeaseAleDatalink | 1.3.6.1.4.1.6527.3.1.2.4.2.110.1.1 | TmnxAccessLoopEncapDataLink | read-only | The value of svcDhcpLeaseAleDatalink indicates the data link used by the subscriber host on the DSL access loop. |
| TMN svcDhcpLeaseAleEncaps1 | 1.3.6.1.4.1.6527.3.1.2.4.2.110.1.2 | TmnxAccessLoopEncaps1 | read-only | The value of svcDhcpLeaseAleEncaps1 indicates the encapsulation used by the subscriber host on the DSL access loop. |
| TMN svcDhcpLeaseAleEncaps2 | 1.3.6.1.4.1.6527.3.1.2.4.2.110.1.3 | TmnxAccessLoopEncaps2 | read-only | The value of svcDhcpLeaseAleEncaps2 indicates the encapsulation used by the subscriber host on the DSL access loop. |
| svcDhcpLeaseAleEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.110.1 | not-accessible | Each conceptual row represents access loop encapsulation information of a DHCP lease state. | |
| svcDhcpLeaseAleTable | 1.3.6.1.4.1.6527.3.1.2.4.2.110 | not-accessible | The svcDhcpLeaseAleTable contains Access Loop Encapsulation information for DHCP lease states. Entries in this table are created and destroyed by the system. This table is a sparse augment of the svcDhcpLeaseTable: entries are created only for DHCP lease states for which Access Loop Encapsulation information is available. | |
| STR svcDhcpLeaseAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.26 | TmnxAncpStringOrZero | read-only | The object svcDhcpLeaseAncpString indicates the value of the ancp-string received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginStrings. |
| STR svcDhcpLeaseAppProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.54 | DisplayString | read-only | The value of svcDhcpLeaseAppProfString indicates the application profile string applicable for this DHCP lease state. The value of svcDhcpLeaseOriginStrings indicates whether this application profile string was received from DHCP or from the Radius server. |
| IP svcDhcpLeaseBCastIpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.30 | InetAddress | read-only | The value of svcDhcpLeaseBCastIpAddr indicates the broadcast IP address received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeaseBCastIpAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.29 | InetAddressType | read-only | The value of svcDhcpLeaseBCastIpAddrType indicates the address type of svcDhcpLeaseBCastIpAddr. |
| TNA svcDhcpLeaseBgpAuthKeyChain | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.2 | TNamedItemOrEmpty | read-only | The value of svcDhcpLeaseBgpAuthKeyChain indicates the keychain which is used to sign and/or authenticate the BGP protocol stream. |
| svcDhcpLeaseBgpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1 | not-accessible | Each row entry contains parameters used for BGP. | |
| TPO svcDhcpLeaseBgpExportPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.5 | TPolicyStatementNameOrEmpty | read-only | The value of svcDhcpLeaseBgpExportPolicy indicates the export policy. |
| TPO svcDhcpLeaseBgpImportPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.4 | TPolicyStatementNameOrEmpty | read-only | The value of svcDhcpLeaseBgpImportPolicy indicates the import policy. |
| OCT svcDhcpLeaseBgpMD5AuthKey | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.3 | OCTET STRING | read-only | The value of svcDhcpLeaseBgpMD5AuthKey indicates the authentication key used between BGP peers neighbors before establishing sessions. Authentication is done using the MD-5 message based digest protocol. |
| INE svcDhcpLeaseBgpPeerAS | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.6 | InetAutonomousSystemNumber | read-only | The value of svcDhcpLeaseBgpPeerAS indicates the Autonomous System number for the remote peer. |
| BGP svcDhcpLeaseBgpPeeringStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.7 | BgpPeeringStatus | read-only | The value of svcDhcpLeaseBgpPeeringStatus indicates the status of the BGP peering session. |
| TNA svcDhcpLeaseBgpPrngPlcyName | 1.3.6.1.4.1.6527.3.1.2.4.2.93.1.1 | TNamedItemOrEmpty | read-only | The value of svcDhcpLeaseBgpPrngPlcyName indicates the peering policy which is used to set up the BGP peer for this lease state. |
| svcDhcpLeaseBgpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.93 | not-accessible | The svcDhcpLeaseBgpTable augments the svcDhcpLeaseTable. This table contains the parameters used for BGP. | |
| TNA svcDhcpLeaseCategoryMapName | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.55 | TNamedItemOrEmpty | read-only | The object svcDhcpLeaseCategoryMapName indicates the value of the category map name received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginStrings. |
| MAC svcDhcpLeaseChAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.4 | MacAddress | read-only | The value of svcDhcpLeaseChAddr indicates the MAC address of the DHCP lease state. |
| IP svcDhcpLeaseCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.2 | InetAddress | not-accessible | The value of svcDhcpLeaseCiAddr indicates the IP address of the DHCP lease state. |
| U32 svcDhcpLeaseCiAddrMaskLen | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.23 | Unsigned32 | read-only | The value of svcDhcpLeaseCiAddrMaskLen indicates the prefix length of the svcDhcpLeaseCiAddr for a DHCPv6 lease. |
| IPt svcDhcpLeaseCiAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.1 | InetAddressType | not-accessible | The value of svcDhcpLeaseCiAddrType indicates the address type of svcDhcpLeaseCiAddr. |
| OCT svcDhcpLeaseClientId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.20 | OCTET STRING | read-only | The value of svcDhcpLeaseClientId indicates the DHCPv6 clients unique identifier (DUID) as generated by the client. |
| IP svcDhcpLeaseDefaultRouter | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.32 | InetAddress | read-only | The value of svcDhcpLeaseDefaultRouter indicates the default router received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeaseDefaultRouterTp | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.31 | InetAddressType | read-only | The value of svcDhcpLeaseDefaultRouterTp indicates the address type of svcDhcpLeaseDefaultRouter. |
| IP svcDhcpLeaseDhcpClientAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.47 | InetAddress | read-only | The value of svcDhcpLeaseDhcpClientAddr indicates the IP address of the DHCP Client that owns the lease info. In some cases this address can be different from the address specified in svcDhcpLeaseCiAddr, e.g. in case of DHCPv6 prefix delegation. |
| IPt svcDhcpLeaseDhcpClientAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.46 | InetAddressType | read-only | The value of svcDhcpLeaseDhcpClientAddrType indicates the address type of svcDhcpLeaseDhcpClientAddr. |
| IP svcDhcpLeaseDhcpServerAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.42 | InetAddress | read-only | The value of svcDhcpLeaseDhcpServerAddr indicates the IP address of the DHCP server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeaseDhcpServerAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.41 | InetAddressType | read-only | The value of svcDhcpLeaseDhcpServerAddrType indicates the address type of svcDhcpLeaseDhcpServerAddr. |
| TMN svcDhcpLeaseEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.7 | TmnxEncapVal | read-only | When the value of svcDhcpLeaseLocale is 'sap', the object svcDhcpLeasePortId along with the object svcDhcpLeaseEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| svcDhcpLeaseEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1 | not-accessible | Information about a specific DHCP lease state. | |
| T/F svcDhcpLeaseEvaluateState | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.4 | TruthValue | read-write | The value of svcDhcpLeaseEvaluateState allows to cause a re-evaluation of the specified lease state. When this object is set to 'true', the system will perform a re-evaluation of the lease state. GETs and GETNEXTs on this variable return false. It is not possible to simultaneously request for a lease-state re-evaluation, and modify any of the svcDhcpLeaseModifySubIndent, svcDhcpLeaseModifySubProfile or svcDhcpLeaseModifySlaProfile values. |
| T/F svcDhcpLeaseForceRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.92.1.1 | TruthValue | read-write | The value of svcDhcpLeaseForceRenew allows to force the DHCP client to renew its lease. When the value of this object is set to 'true', the system will send a forcerenew DHCP message to the client. GETs and GETNEXTs on this variable return false. |
| IP svcDhcpLeaseFramedIpNetMask | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.28 | InetAddress | read-only | The value of svcDhcpLeaseFramedIpNetMask indicates the framed IP netmask received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeaseFramedIpNetMaskTp | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.27 | InetAddressType | read-only | The value of svcDhcpLeaseFramedIpNetMaskTp indicates the address type of svcDhcpLeaseFramedIpNetMask. |
| U32 svcDhcpLeaseIAID | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.21 | Unsigned32 | read-only | The value of svcDhcpLeaseIAID indicates the Identity Association ID (IAID) the address or prefix defined by svcDhcpLeaseCiAddr/svcDhcpLeaseCiAddrMaskLen has been assigned to. This object is only meaningful for DHCPv6 leases. |
| IAI svcDhcpLeaseIAIDType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.22 | IAIDType | read-only | The value of svcDhcpLeaseIAIDType indicates the type of svcDhcpLeaseIAID. This object is only meaningful for DHCPv6 leases. |
| STR svcDhcpLeaseInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.49 | DisplayString | read-only | The object svcDhcpLeaseInterDestId indicates the intermediate destination identifier received from either the DHCP or the Radius server or the local user database as indicated by the value of svcDhcpLeaseOriginStrings. |
| OCT svcDhcpLeaseInterfaceId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.61 | OCTET STRING | read-only | The value of svcDhcpLeaseInterfaceId indicates the content of the Interface-id option used for authentication. This object is only meaningful for DHCPv6 leases. |
| T/F svcDhcpLeaseLeaseSplitActive | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.48 | TruthValue | read-only | The value of svcDhcpLeaseLeaseSplitActive indicates whether or not the current lease time resulted from a lease split. If svcDhcpLeaseLeaseSplitActive is 'true', the lease time passed to the client is determined by the value of the object sapTlsDhcpProxyLeaseTime for VPLS SAPs, or by the value of the object vRtrIfDHCPProxyLeaseTime for Layer 3 interfaces. |
| INT svcDhcpLeaseLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.5 | INTEGER | read-only | The value of svcDhcpLeaseLocale specifies if the DHCP lease state is learned via a SAP or SDP. |
| STR svcDhcpLeaseModifyAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.6 | TmnxAncpStringOrZero | read-write | The value of svcDhcpLeaseModifyAncpString allows to specify a new ANCP-string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new ANCP-string. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLeaseModifyAppProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.7 | DisplayString | read-write | The value of svcDhcpLeaseModifyAppProfile specifies a new application profile string for this lease state. When a SET of this object is done with a non empty string, the system assigns a new application profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| svcDhcpLeaseModifyEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1 | not-accessible | Each row entry contains parameters that allow to modify a lease-state's attributes. | |
| STR svcDhcpLeaseModifySlaProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.3 | DisplayString | read-write | The value of svcDhcpLeaseModifySlaProfile allows to specify a new SLA profile string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new SLA profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLeaseModifySubIndent | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.1 | DisplayString | read-write | The value of svcDhcpLeaseModifySubIndent allows to specify a new subscriber name for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new subscriber name. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLeaseModifySubProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.2 | DisplayString | read-write | The value of svcDhcpLeaseModifySubProfile allows to specify a new subscriber profile string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new subscriber profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| svcDhcpLeaseModifyTable | 1.3.6.1.4.1.6527.3.1.2.4.2.91 | not-accessible | The svcDhcpLeaseModifyTable augments the svcDhcpLeaseTable. The table allows the operator to modify attributes of the lease state. | |
| STR svcDhcpLeaseModInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.91.1.5 | DisplayString | read-write | The value of svcDhcpLeaseModInterDestId allows to specify a new intermediate destination id for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new intermediate destination id. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| T/F svcDhcpLeaseNakNextRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.56 | TruthValue | read-only | The value of svcDhcpLeaseNakNextRenew indicates that the system will reply with a DHCP-NAK when the client sends the next DHCP-REQUEST, whereafter the lease-state will be deleted. This state is entered upon reception of a FORCE-NAK COA (Change Of Authority) request from RADIUS for this lease state, which at the same time also triggered the system to send a FORCE-RENEW DHCP message to the client. |
| MAC svcDhcpLeaseNextHopMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.3 | MacAddress | not-accessible | The value of svcDhcpLeaseNextHopMacAddr indicates the MAC address of the next hop of this DHCP lease state. Normally, the next hop MAC address equals the value of svcDhcpLeaseChAddr. If the value of the object TIMETRA-VRTR-MIB::vRtrIfDHCPLayer2Header is set to 'true', a routing device can be present between this node and the DHCP client. In that case, the value of the next hop MAC address contains the MAC address of this routing device. |
| OCT svcDhcpLeaseOption60 | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.63 | OCTET STRING | read-only | The value of svcDhcpLeaseOption60 indicates the content of option 60 for this DHCP lease state. This object is only meaningful for DHCPv4 leases. |
| OCT svcDhcpLeaseOption82 | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.11 | OCTET STRING | read-only | The value of svcDhcpLeaseOption82 indicates the content of option 82 for this DHCP lease state. |
| DHC svcDhcpLeaseOriginLeaseInfo | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.45 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLeaseOriginLeaseInfo indicates which server provided the lease state information. |
| DHC svcDhcpLeaseOriginStrings | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.44 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLeaseOriginStrings indicates which server provided the Sub-profile, SLA profile, Ancp string and Intermediate Destination Id. |
| DHC svcDhcpLeaseOriginSubscrId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.43 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLeaseOriginSubscrId indicates which source provided the subscriber-id. |
| TBU svcDhcpLeaseOvrCBS | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.7 | TBurstSizeBytesOverride | read-only | The value of svcDhcpLeaseOvrCBS indicates the amount of reserved buffer space (in bytes) for the object overridden by this row. |
| TCI svcDhcpLeaseOvrCIR | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.6 | TCIRRateOverride | read-only | The value of svcDhcpLeaseOvrCIR indicates the CIR rate in kbps allowed for the object overridden by this row. |
| TDI svcDhcpLeaseOvrDirection | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.1 | TDirection | not-accessible | The value of svcDhcpLeaseOvrDirection indicates if this row specifies ingress or egress qos override parameters. |
| svcDhcpLeaseOvrEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1 | not-accessible | Each conceptual row represents QoS overrides information of a DHCP lease state. | |
| TBU svcDhcpLeaseOvrMBS | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.8 | TBurstSizeBytesOverride | read-only | The value of svcDhcpLeaseOvrMBS indicates the maximum amount of reserved buffer space (in bytes) for the object overridden by this row. |
| TPI svcDhcpLeaseOvrPIR | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.5 | TPIRRateOverride | read-only | The value of svcDhcpLeaseOvrPIR indicates the PIR rate in kbps allowed for the object overridden by this row. |
| svcDhcpLeaseOvrTable | 1.3.6.1.4.1.6527.3.1.2.4.2.118 | not-accessible | The svcDhcpLeaseOvrTable contains QoS (Quality of Service) overrides for DHCP lease states. Entries in this table are created and destroyed by the system. This table is a sparse augment of the svcDhcpLeaseTable: entries are created only for DHCP lease states for which QoS overrides information is available. | |
| TQO svcDhcpLeaseOvrType | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.2 | TQosOverrideType | not-accessible | The value of svcDhcpLeaseOvrType indicates what field has been overridden by this row. |
| I32 svcDhcpLeaseOvrTypeId | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.3 | Integer32 | not-accessible | The value of svcDhcpLeaseOvrTypeId indicates the ID of the queue/policer that has been overridden by this row. If the value of svcDhcpLeaseOvrType is not 'queue (1)' or 'policer (2)', this field must be set to zero (0). |
| TNA svcDhcpLeaseOvrTypeName | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.4 | TNamedItemOrEmpty | not-accessible | The value of svcDhcpLeaseOvrTypeName indicates the name of the scheduler/arbiter that has been overridden by this row. If the value of svcDhcpLeaseOvrType is not 'arbiter (4)' or 'scheduler (5)', this field must be set to zero (0). |
| THS svcDhcpLeaseOvrWrrWeight | 1.3.6.1.4.1.6527.3.1.2.4.2.118.1.9 | THsmdaWrrWeightOverride | read-only | The value of svcDhcpLeaseOvrWrrWeight specifies the weight of this queue for the HSMDA scheduler. The weight determines how much bandwidth this queue gets out of the total rate for the scheduling class. The value of svcDhcpLeaseOvrWrrWeight is only relevant if the value of svcDhcpLeaseOvrType is equal to 'queue', and if the queue specified in svcDhcpLeaseOvrTypeId is referenced in the value of TIMETRA-QOS-MIB::tHsmdaWrrPolicyIncludeQueues of the Weighted Round Robin policy associated wit this PPP session. |
| U32 svcDhcpLeasePersistKey | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.12 | Unsigned32 | read-only | The value of svcDhcpLeasePersistKey indicates a key value that can be used to track this lease state in the persistence file. |
| TNA svcDhcpLeasePoolName | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.59 | TNamedItem | read-only | The value of svcDhcpLeasePoolName indicates the pool name included in the Relay-forward Message. This object is only meaningful for DHCPv6 leases. |
| TMN svcDhcpLeasePortId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.6 | TmnxPortID | read-only | When the value of svcDhcpLeaseLocale is 'sap', the object svcDhcpLeasePortId along with the object svcDhcpLeaseEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP svcDhcpLeasePrimaryDns | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.34 | InetAddress | read-only | The value of svcDhcpLeasePrimaryDns indicates the primary DNS server received from the server indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeasePrimaryDnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.33 | InetAddressType | read-only | The value of svcDhcpLeasePrimaryDnsType indicates the address type of svcDhcpLeasePrimaryDns. |
| IP svcDhcpLeasePrimaryNbns | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.51 | InetAddress | read-only | The value of svcDhcpLeasePrimaryNbns indicates the primary NBNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeasePrimaryNbnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.50 | InetAddressType | read-only | The value of svcDhcpLeasePrimaryNbnsType indicates the address type of svcDhcpLeasePrimaryNbns. |
| OCT svcDhcpLeaseRadCalledStationId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.64 | OCTET STRING | read-only | The value of svcDhcpLeaseRadCalledStationId indicates the content of the Called-Station-Id RADIUS attribute used for authentication. |
| OCT svcDhcpLeaseRadiusClassAttr | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.57 | OCTET STRING | read-only | The value of svcDhcpLeaseRadiusClassAttr indicates the Class attribute returned by the RADIUS server in an Access-Accept message. If no RADIUS authentication is performed for this lease state, or RADIUS did not return this attribute, the value of this object is empty. |
| STR svcDhcpLeaseRadiusUserName | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.58 | DisplayString | read-only | The value of svcDhcpLeaseRadiusUserName indicates the User-Name attribute returned by the RADIUS server in an Access-Accept message. If RADIUS did not return this attribute, the value of this object is equal to the User-Name attribute sent in the original Access-Request message. If no RADIUS authentication is performed for this session, the value of this object is empty. |
| U32 svcDhcpLeaseRemainLseTime | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.10 | Unsigned32 | read-only | The value of svcDhcpLeaseRemainLseTime indicates the remaining lease time of the DHCP lease state. |
| OCT svcDhcpLeaseRemoteId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.62 | OCTET STRING | read-only | The value of svcDhcpLeaseRemoteId indicates the content of the Remote-id option used for authentication. This object is only meaningful for DHCPv6 leases. |
| NUM svcDhcpLeaseRetailerIf | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.25 | InterfaceIndexOrZero | read-only | The value of svcDhcpLeaseRetailerIf indicates the interface index of the retailer VPRN interface to which this DHCP lease belongs. When this object is non zero, the DHCP lease belongs to a retailer VPRN. |
| TMN svcDhcpLeaseRetailerSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.24 | TmnxServId | read-only | The value of svcDhcpLeaseRetailerSvcId indicates the service ID of the retailer VPRN service to which this DHCP lease belongs. When this object is non zero, the DHCP lease belongs to a retailer VPRN. |
| SDP svcDhcpLeaseSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.8 | SdpId | read-only | When the value of svcDhcpLeaseLocale is 'sdp', the object svcDhcpLeaseSdpId, along with the object svcDhcpLeaseVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP svcDhcpLeaseSecondaryDns | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.36 | InetAddress | read-only | The value of svcDhcpLeaseSecondaryDns indicates the secondary DNS server received from the server indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeaseSecondaryDnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.35 | InetAddressType | read-only | The value of svcDhcpLeaseSecondaryDnsType indicates the address type of svcDhcpLeaseSecondaryDns. |
| IP svcDhcpLeaseSecondaryNbns | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.53 | InetAddress | read-only | The value of svcDhcpLeaseSecondaryNbns indicates the secondary NBNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLeaseSecondaryNbnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.52 | InetAddressType | read-only | The value of svcDhcpLeaseSecondaryNbnsType indicates the address type of svcDhcpLeaseSecondaryNbns. |
| OCT svcDhcpLeaseServerId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.60 | OCTET STRING | read-only | The value of svcDhcpLeaseServerId indicates the DHCPv6 servers unique identifier (DUID) as generated by the server. This object is only meaningful for DHCPv6 leases. |
| DAT svcDhcpLeaseServerLastRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.39 | DateAndTime | read-only | The value of svcDhcpLeaseServerLastRenew indicates when we last received a renewal from either the DHCP or the Radius server. |
| DAT svcDhcpLeaseServerLeaseEnd | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.40 | DateAndTime | read-only | The value of svcDhcpLeaseServerLeaseEnd indicates when the server will consider the lease as being expired. |
| DAT svcDhcpLeaseServerLeaseStart | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.38 | DateAndTime | read-only | The value of svcDhcpLeaseServerLeaseStart indicates when this lease was created. |
| U32 svcDhcpLeaseSessionTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.37 | Unsigned32 | read-only | The value of svcDhcpLeaseSessionTimeout indicates the session timeout received from either the DHCP or the Radius server as indicated by the value of svcDhcpLeaseOriginLeaseInfo. |
| U32 svcDhcpLeaseShcvChecks | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.17 | Unsigned32 | read-only | The value of svcDhcpLeaseShcvChecks indicates the number of host connectivity check requests for this DHCP lease state. |
| SER svcDhcpLeaseShcvOperState | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.16 | ServShcvOperState | read-only | The value of svcDhcpLeaseShcvOperState indicates the state of the subscriber host connectivity check for this DHCP lease state. |
| U32 svcDhcpLeaseShcvReplies | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.18 | Unsigned32 | read-only | The value of svcDhcpLeaseShcvReplies indicates the number of host connectivity replies for this DHCP lease state. |
| TIM svcDhcpLeaseShcvReplyTime | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.19 | TimeStamp | read-only | The value of svcDhcpLeaseShcvReplyTime indicates the time of the last successful host connectivity check for this DHCP lease state. |
| STR svcDhcpLeaseSlaProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.15 | DisplayString | read-only | The value of svcDhcpLeaseSlaProfString indicates the SLA profile string applicable for this DHCP lease state. The value of svcDhcpLeaseOriginStrings indicates whether this SLA profile string was received from the DHCP or from the Radius server. |
| svcDhcpLeaseStateActionEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.25.1 | not-accessible | Each row entry contains parameters that allow to perform an action on the corresponding lease-state. | |
| svcDhcpLeaseStateActionTable | 1.3.6.1.4.1.6527.3.1.2.4.2.25 | not-accessible | The svcDhcpLeaseStateActionTable augments the svcDhcpLeaseStateTable. The table allows the operator to perform actions on the lease state. | |
| svcDhcpLeaseStateBgpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1 | not-accessible | Each row entry contains parameters used for BGP. | |
| svcDhcpLeaseStateBgpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.53 | not-accessible | The svcDhcpLeaseStateBgpTable augments the svcDhcpLeaseStateTable. This table contains the parameters used for BGP. | |
| svcDhcpLeaseStateEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1 | not-accessible | Information about a specific DHCP lease state. | |
| svcDhcpLeaseStateModifyEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1 | not-accessible | Each row entry contains parameters that allow to modify a lease-state's attributes. | |
| svcDhcpLeaseStateModifyTable | 1.3.6.1.4.1.6527.3.1.2.4.2.18 | not-accessible | The svcDhcpLeaseStateModifyTable augments the svcDhcpLeaseStateTable. The table allows the operator to modify attributes of the lease state. | |
| svcDhcpLeaseStateTable | 1.3.6.1.4.1.6527.3.1.2.4.2.16 | not-accessible | A table that contains DHCP lease states. | |
| STR svcDhcpLeaseSubProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.14 | DisplayString | read-only | The value of svcDhcpLeaseSubProfString indicates the subscriber profile string applicable for this DHCP lease state. The value of svcDhcpLeaseOriginStrings indicates whether this subscriber profile string was received from the DHCP or from the Radius server. |
| STR svcDhcpLeaseSubscrIdent | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.13 | DisplayString | read-only | The value of svcDhcpLeaseSubscrIdent indicates the id of the parent subscriber of this DHCP lease state. The value of svcDhcpLeaseOriginSubscrId indicates whether this subscriber identification was received from the DHCP or from the Radius server. |
| svcDhcpLeaseTable | 1.3.6.1.4.1.6527.3.1.2.4.2.90 | not-accessible | A table that contains DHCP lease states. | |
| U32 svcDhcpLeaseVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.90.1.9 | Unsigned32 | read-only | When the value of svcDhcpLeaseLocale is 'sdp', the object svcDhcpLeaseSdpId, along with the object svcDhcpLeaseVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| svcDhcpLeaseWppEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.127.1 | not-accessible | Each row entry contains WPP information associated with a particular DHCP lease state. | |
| TNA svcDhcpLeaseWppPortalName | 1.3.6.1.4.1.6527.3.1.2.4.2.127.1.3 | TNamedItemOrEmpty | read-only | The value of svcDhcpLeaseWppPortalName indicates the name of the WPP portal used for this lease state. The value zero indicates that the WPP portal is currently unknown. The values of svcDhcpLeaseWppPortalRouter and svcDhcpLeaseWppPortalName refer to a conceptual row in the TIMETRA-WEB-PORTAL-MIB::tmnxWppPortalTable. |
| TMN svcDhcpLeaseWppPortalRouter | 1.3.6.1.4.1.6527.3.1.2.4.2.127.1.2 | TmnxVRtrIDOrZero | read-only | The value of svcDhcpLeaseWppPortalRouter indicates the routing instance identifier of the WPP portal used for this lease state. The value zero indicates that the WPP portal is currently unknown. |
| INT svcDhcpLeaseWppState | 1.3.6.1.4.1.6527.3.1.2.4.2.127.1.1 | INTEGER | read-only | The value of svcDhcpLeaseWppState indicates the WPP state for this lease state. |
| svcDhcpLeaseWppTable | 1.3.6.1.4.1.6527.3.1.2.4.2.127 | not-accessible | The svcDhcpLeaseWppTable is a sparse augment of the svcDhcpLeaseTable. It contains Web Portal Protocol (WPP) information associated with DHCP lease states. | |
| STR svcDhcpLseStateAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.25 | DisplayString | read-only | The object svcDhcpLseStateAncpString indicates the value of the ancp-string received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginStrings. |
| STR svcDhcpLseStateAppProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.53 | DisplayString | read-only | The value of svcDhcpLseStateAppProfString indicates the application profile string applicable for this DHCP lease state. The value of svcDhcpLseStateOriginStrings indicates whether this application profile string was received from DHCP or from the Radius server. |
| IP svcDhcpLseStateBCastIpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.29 | InetAddress | read-only | The value of svcDhcpLseStateBCastIpAddr indicates the broadcast IP address received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateBCastIpAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.28 | InetAddressType | read-only | The value of svcDhcpLseStateBCastIpAddrType indicates the address type of svcDhcpLseStateBCastIpAddr. |
| TNA svcDhcpLseStateBgpAuthKeyChain | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.2 | TNamedItemOrEmpty | read-only | The value of svcDhcpLseStateBgpAuthKeyChain indicates the keychain which is used to sign and/or authenticate the BGP protocol stream. |
| TPO svcDhcpLseStateBgpExportPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.5 | TPolicyStatementNameOrEmpty | read-only | The value of svcDhcpLseStateBgpExportPolicy indicates the export policy. |
| TPO svcDhcpLseStateBgpImportPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.4 | TPolicyStatementNameOrEmpty | read-only | The value of svcDhcpLseStateBgpImportPolicy indicates the import policy. |
| OCT svcDhcpLseStateBgpMD5AuthKey | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.3 | OCTET STRING | read-only | The value of svcDhcpLseStateBgpMD5AuthKey indicates the authentication key used between BGP peers neighbors before establishing sessions. Authentication is done using the MD-5 message based digest protocol. |
| INE svcDhcpLseStateBgpPeerAS | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.6 | InetAutonomousSystemNumber | read-only | The value of svcDhcpLseStateBgpPeerAS indicates the Autonomous System number for the remote peer. |
| BGP svcDhcpLseStateBgpPeeringStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.7 | BgpPeeringStatus | read-only | The value of svcDhcpLseStateBgpPeeringStatus indicates the status of the BGP peering session. |
| TNA svcDhcpLseStateBgpPrngPlcyName | 1.3.6.1.4.1.6527.3.1.2.4.2.53.1.1 | TNamedItemOrEmpty | read-only | The value of svcDhcpLseStateBgpPrngPlcyName indicates the peering policy which is used to set up the BGP peer for this lease state. |
| TNA svcDhcpLseStateCategoryMapName | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.55 | TNamedItemOrEmpty | read-only | The object svcDhcpLseStateCategoryMapName indicates the value of the category map name received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginStrings. |
| MAC svcDhcpLseStateChAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.8 | MacAddress | read-only | The value of svcDhcpLseStateChAddr indicates the MAC address of the DHCP lease state. |
| IP svcDhcpLseStateCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.2 | InetAddress | not-accessible | The value of svcDhcpLseStateCiAddr indicates the IP address of the DHCP lease state. |
| U32 svcDhcpLseStateCiAddrMaskLen | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.22 | Unsigned32 | read-only | The value of svcDhcpLseStateCiAddrMaskLen indicates the prefix length of the svcDhcpLseStateCiAddr for a DHCPv6 lease. |
| IPt svcDhcpLseStateCiAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.1 | InetAddressType | not-accessible | The value of svcDhcpLseStateCiAddrType indicates the address type of svcDhcpLseStateCiAddr. |
| OCT svcDhcpLseStateClientId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.19 | OCTET STRING | read-only | The value of svcDhcpLseStateClientId indicates the DHCPv6 clients unique identifier (DUID) as generated by the client. |
| IP svcDhcpLseStateDefaultRouter | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.31 | InetAddress | read-only | The value of svcDhcpLseStateDefaultRouter indicates the default router received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateDefaultRouterTp | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.30 | InetAddressType | read-only | The value of svcDhcpLseStateDefaultRouterTp indicates the address type of svcDhcpLseStateDefaultRouter. |
| IP svcDhcpLseStateDhcpClientAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.46 | InetAddress | read-only | The value of svcDhcpLseStateDhcpClientAddr indicates the IP address of the DHCP Client that owns the lease info. In some cases this address can be different from the address specified in svcDhcpLseStateCiAddr, e.g. in case of DHCPv6 prefix delegation. |
| IPt svcDhcpLseStateDhcpClientAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.45 | InetAddressType | read-only | The value of svcDhcpLseStateDhcpClientAddrType indicates the address type of svcDhcpLseStateDhcpClientAddr. |
| IP svcDhcpLseStateDhcpServerAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.41 | InetAddress | read-only | The value of svcDhcpLseStateDhcpServerAddr indicates the IP address of the DHCP server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateDhcpServerAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.40 | InetAddressType | read-only | The value of svcDhcpLseStateDhcpServerAddrType indicates the address type of svcDhcpLseStateDhcpServerAddr. |
| TMN svcDhcpLseStateEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.5 | TmnxEncapVal | read-only | When the value of svcDhcpLseStateLocale is 'sap', the object svcDhcpLseStatePortId along with the object svcDhcpLseStateEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| T/F svcDhcpLseStateEvaluateState | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.4 | TruthValue | read-write | The value of svcDhcpLseStateEvaluateState allows to cause a re-evaluation of the specified lease state. When this object is set to 'true', the system will perform a re-evaluation of the lease state. GETs and GETNEXTs on this variable return false. It is not possible to simultaneously request for a lease-state re-evaluation, and modify any of the svcDhcpLseStateModifySubIndent, svcDhcpLseStateModifySubProfile or svcDhcpLseStateModifySlaProfile values. |
| T/F svcDhcpLseStateForceRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.25.1.1 | TruthValue | read-write | The value of svcDhcpLseStateForceRenew allows to force the DHCP client to renew its lease. When the value of this object is set to 'true', the system will send a forcerenew DHCP message to the client. GETs and GETNEXTs on this variable return false. |
| IP svcDhcpLseStateFramedIpNetMask | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.27 | InetAddress | read-only | The value of svcDhcpLseStateFramedIpNetMask indicates the framed IP netmask received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateFramedIpNetMaskTp | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.26 | InetAddressType | read-only | The value of svcDhcpLseStateFramedIpNetMaskTp indicates the address type of svcDhcpLseStateFramedIpNetMask. |
| U32 svcDhcpLseStateIAID | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.20 | Unsigned32 | read-only | The value of svcDhcpLseStateIAID indicates the Identity Association ID (IAID) the address or prefix defined by svcDhcpLseStateCiAddr/svcDhcpLseStateCiAddrMaskLen has been assigned to. This object is only meaningful for DHCPv6 leases. |
| IAI svcDhcpLseStateIAIDType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.21 | IAIDType | read-only | The value of svcDhcpLseStateIAIDType indicates the type of svcDhcpLseStateIAID. This object is only meaningful for DHCPv6 leases. |
| STR svcDhcpLseStateInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.48 | DisplayString | read-only | The object svcDhcpLseStateInterDestId indicates the intermediate destination identifier received from either the DHCP or the Radius server or the local user database as indicated by the value of svcDhcpLseStateOriginStrings. |
| T/F svcDhcpLseStateLeaseSplitActive | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.47 | TruthValue | read-only | The value of svcDhcpLseStateLeaseSplitActive indicates whether or not the current lease time resulted from a lease split. If svcDhcpLseStateLeaseSplitActive is 'true', the lease time passed to the client is determined by the value of the object sapTlsDhcpProxyLeaseTime for VPLS SAPs, or by the value of the object vRtrIfDHCPProxyLeaseTime for Layer 3 interfaces. |
| INT svcDhcpLseStateLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.3 | INTEGER | read-only | The value of svcDhcpLseStateLocale specifies if the DHCP lease state is learned via a SAP or SDP. |
| STR svcDhcpLseStateModifyAncpString | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.6 | TmnxAncpStringOrZero | read-write | The value of svcDhcpLseStateModifyAncpString allows to specify a new ANCP-string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new ANCP-string. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifyAppProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.7 | DisplayString | read-write | The value of svcDhcpLseStateModifyAppProfile specifies a new application profile string for this lease state. When a SET of this object is done with a non empty string, the system assigns a new application profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifySlaProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.3 | DisplayString | read-write | The value of svcDhcpLseStateModifySlaProfile allows to specify a new SLA profile string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new SLA profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifySubIndent | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.1 | DisplayString | read-write | The value of svcDhcpLseStateModifySubIndent allows to specify a new subscriber name for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new subscriber name. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModifySubProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.2 | DisplayString | read-write | The value of svcDhcpLseStateModifySubProfile allows to specify a new subscriber profile string for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new subscriber profile. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| STR svcDhcpLseStateModInterDestId | 1.3.6.1.4.1.6527.3.1.2.4.2.18.1.5 | DisplayString | read-write | The value of svcDhcpLseStateModInterDestId allows to specify a new intermediate destination id for this lease state. When a SET of this object is done with a non empty string, the system will attempt to assign a new intermediate destination id. A SET with an empty string has no effect on the system. (NOOP). GETs and GETNEXTs on this variable return an empty string. |
| T/F svcDhcpLseStateNakNextRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.56 | TruthValue | read-only | The value of svcDhcpLseStateNakNextRenew indicates that the system will reply with a DHCP-NAK when the client sends the next DHCP-REQUEST, whereafter the lease-state will be deleted. This state is entered upon reception of a FORCE-NAK COA (Change Of Authority) request from RADIUS for this lease state, which at the same time also triggered the system to send a FORCE-RENEW DHCP message to the client. |
| MAC svcDhcpLseStateNewChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.23 | MacAddress | accessible-for-notify | The value of the object svcDhcpLseStateNewChAddr indicates the client MAC address specified in the DHCP PDU causing the trap. |
| IP svcDhcpLseStateNewCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.22 | IpAddress | accessible-for-notify | The value of the object svcDhcpLseStateNewCiAddr indicates the client IP address specified in the DHCP PDU causing the trap. |
| MAC svcDhcpLseStateNextHopMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.54 | MacAddress | read-only | The value of svcDhcpLseStateNextHopMacAddr indicates the MAC address of the next hop of this DHCP lease state. Normally, the next hop MAC address equals the value of svcDhcpLseStateChAddr. If the value of the object TIMETRA-VRTR-MIB::vRtrIfDHCPLayer2Header is set to 'true', a routing device can be present between this node and the DHCP client. In that case, the value of the next hop MAC address contains the MAC address of this routing device. |
| MAC svcDhcpLseStateOldChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.21 | MacAddress | accessible-for-notify | The value of the object svcDhcpLseStateOldChAddr indicates the client MAC address that was formerly assigned to the specified DHCP lease state. |
| IP svcDhcpLseStateOldCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.20 | IpAddress | accessible-for-notify | The value of the object svcDhcpLseStateOldCiAddr indicates the client IP address that was formerly assigned to the specified DHCP lease state. |
| OCT svcDhcpLseStateOption82 | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.10 | OCTET STRING | read-only | The value of svcDhcpLseStateOption82 indicates the content of option 82 for this DHCP lease state. |
| DHC svcDhcpLseStateOriginLeaseInfo | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.44 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLseStateOriginLeaseInfo indicates which server provided the lease state information. |
| DHC svcDhcpLseStateOriginStrings | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.43 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLseStateOriginStrings indicates which server provided the Sub-profile, SLA profile, Ancp string and Intermediate Destination Id. |
| DHC svcDhcpLseStateOriginSubscrId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.42 | DhcpLseStateInfoOrigin | read-only | The value of svcDhcpLseStateOriginSubscrId indicates which source provided the subscriber-id. |
| U32 svcDhcpLseStatePersistKey | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.11 | Unsigned32 | read-only | The value of svcDhcpLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file. |
| STR svcDhcpLseStatePopulateError | 1.3.6.1.4.1.6527.3.1.2.4.6.26 | DisplayString | accessible-for-notify | The value of the object svcDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease State table upon reception of a DHCP ACK message. |
| TMN svcDhcpLseStatePortId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.4 | TmnxPortID | read-only | When the value of svcDhcpLseStateLocale is 'sap', the object svcDhcpLseStatePortId along with the object svcDhcpLseStateEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP svcDhcpLseStatePrimaryDns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.33 | InetAddress | read-only | The value of svcDhcpLseStatePrimaryDns indicates the primary DNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStatePrimaryDnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.32 | InetAddressType | read-only | The value of svcDhcpLseStatePrimaryDnsType indicates the address type of svcDhcpLseStatePrimaryDns. |
| IP svcDhcpLseStatePrimaryNbns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.50 | InetAddress | read-only | The value of svcDhcpLseStatePrimaryNbns indicates the primary NBNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStatePrimaryNbnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.49 | InetAddressType | read-only | The value of svcDhcpLseStatePrimaryNbnsType indicates the address type of svcDhcpLseStatePrimaryNbns. |
| OCT svcDhcpLseStateRadiusClassAttr | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.57 | OCTET STRING | read-only | The value of svcDhcpLseStateRadiusClassAttr indicates the Class attribute returned by the RADIUS server in an Access-Accept message. If no RADIUS authentication is performed for this lease state, or RADIUS did not return this attribute, the value of this object is empty. |
| STR svcDhcpLseStateRadiusUserName | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.58 | DisplayString | read-only | The value of svcDhcpLseStateRadiusUserName indicates the User-Name attribute returned by the RADIUS server in an Access-Accept message. If RADIUS did not return this attribute, the value of this object is equal to the User-Name attribute sent in the original Access-Request message. If no RADIUS authentication is performed for this session, the value of this object is empty. |
| U32 svcDhcpLseStateRemainLseTime | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.9 | Unsigned32 | read-only | The value of svcDhcpLseStateRemainLseTime indicates the remaining lease time of the DHCP lease state. |
| NTF svcDHCPLseStateRestoreProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.14 | The svcDHCPLseStateRestoreProblem notification is generated when an an error is detected while processing a persistency record. | ||
| NUM svcDhcpLseStateRetailerIf | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.24 | InterfaceIndexOrZero | read-only | The value of svcDhcpLseStateRetailerIf indicates the interface index of the retailer VPRN interface to which this DHCP lease belongs. When this object is non zero, the DHCP lease belongs to a retailer VPRN. |
| TMN svcDhcpLseStateRetailerSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.23 | TmnxServId | read-only | The value of svcDhcpLseStateRetailerSvcId indicates the service ID of the retailer VPRN service to which this DHCP lease belongs. When this object is non zero, the DHCP lease belongs to a retailer VPRN. |
| SDP svcDhcpLseStateSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.6 | SdpId | read-only | When the value of svcDhcpLseStateLocale is 'sdp', the object svcDhcpLseStateSdpId, along with the object svcDhcpLseStateVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP svcDhcpLseStateSecondaryDns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.35 | InetAddress | read-only | The value of svcDhcpLseStateSecondaryDns indicates the secondary DNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateSecondaryDnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.34 | InetAddressType | read-only | The value of svcDhcpLseStateSecondaryDnsType indicates the address type of svcDhcpLseStateSecondaryDns. |
| IP svcDhcpLseStateSecondaryNbns | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.52 | InetAddress | read-only | The value of svcDhcpLseStateSecondaryNbns indicates the secondary NBNS server received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. The value of this object is ''H when not applicable. |
| IPt svcDhcpLseStateSecondaryNbnsType | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.51 | InetAddressType | read-only | The value of svcDhcpLseStateSecondaryNbnsType indicates the address type of svcDhcpLseStateSecondaryNbns. |
| DAT svcDhcpLseStateServerLastRenew | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.38 | DateAndTime | read-only | The value of svcDhcpLseStateServerLastRenew indicates when we last received a renewal from either the DHCP or the Radius server. |
| DAT svcDhcpLseStateServerLeaseEnd | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.39 | DateAndTime | read-only | The value of svcDhcpLseStateServerLeaseEnd indicates when the server will consider the lease as being expired. |
| DAT svcDhcpLseStateServerLeaseStart | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.37 | DateAndTime | read-only | The value of svcDhcpLseStateServerLeaseStart indicates when this lease was created. |
| U32 svcDhcpLseStateSessionTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.36 | Unsigned32 | read-only | The value of svcDhcpLseStateSessionTimeout indicates the session timeout received from either the DHCP or the Radius server as indicated by the value of svcDhcpLseStateOriginLeaseInfo. |
| U32 svcDhcpLseStateShcvChecks | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.16 | Unsigned32 | read-only | The value of svcDhcpLseStateShcvChecks indicates the number of host connectivity check requests for this DHCP lease state. |
| INT svcDhcpLseStateShcvOperState | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.15 | INTEGER | read-only | The value of svcDhcpLseStateShcvOperState indicates the state of the subscriber host connectivity check for this DHCP lease state. |
| U32 svcDhcpLseStateShcvReplies | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.17 | Unsigned32 | read-only | The value of svcDhcpLseStateShcvReplies indicates the number of host connectivity replies for this DHCP lease state. |
| TIM svcDhcpLseStateShcvReplyTime | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.18 | TimeStamp | read-only | The value of svcDhcpLseStateShcvReplyTime indicates the time of the last successful host connectivity check for this DHCP lease state. |
| STR svcDhcpLseStateSlaProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.14 | DisplayString | read-only | The value of svcDhcpLseStateSlaProfString indicates the SLA profile string applicable for this DHCP lease state. The value of svcDhcpLseStateOriginStrings indicates whether this SLA profile string was received from the DHCP or from the Radius server. |
| STR svcDhcpLseStateSubProfString | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.13 | DisplayString | read-only | The value of svcDhcpLseStateSubProfString indicates the subscriber profile string applicable for this DHCP lease state. The value of svcDhcpLseStateOriginStrings indicates whether this subscriber profile string was received from the DHCP or from the Radius server. |
| STR svcDhcpLseStateSubscrIdent | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.12 | DisplayString | read-only | The value of svcDhcpLseStateSubscrIdent indicates the id of the parent subscriber of this DHCP lease state. The value of svcDhcpLseStateOriginSubscrId indicates whether this subscriber identification was received from the DHCP or from the Radius server. |
| U32 svcDhcpLseStateVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.16.1.7 | Unsigned32 | read-only | When the value of svcDhcpLseStateLocale is 'sdp', the object svcDhcpLseStateSdpId, along with the object svcDhcpLseStateVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| svcDhcpManagedRouteEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1 | not-accessible | A specific DHCP managed route. | |
| IP svcDhcpManagedRouteInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.2 | InetAddress | not-accessible | The value of svcDhcpManagedRouteInetAddr indicates the IP address of the managed route. |
| IPt svcDhcpManagedRouteInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.1 | InetAddressType | not-accessible | The value of svcDhcpManagedRouteInetAddrType indicates the address type of svcDhcpManagedRouteInetAddr. |
| ADR svcDhcpManagedRoutePrefixLen | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.3 | InetAddressPrefixLength | not-accessible | The value of svcDhcpManagedRoutePrefixLen indicates the prefix length of the subnet associated with svcDhcpManagedRouteInetAddr. |
| TMN svcDhcpManagedRouteStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.43.1.4 | TmnxManagedRouteStatus | read-only | The value of svcDhcpManagedRouteStatus indicates the state of this managed route. |
| svcDhcpManagedRouteTable | 1.3.6.1.4.1.6527.3.1.2.4.2.43 | not-accessible | A table that contains DHCP managed routes. | |
| NTF svcDHCPMiscellaneousProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.23 | The svcDHCPMiscellaneousProblem notification is generated on miscellaneous DHCP problems. | ||
| STR svcDhcpPacketProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.25 | DisplayString | accessible-for-notify | The value of the object svcDhcpPacketProblem indicates information on a received DHCP packet that is considered suspicious by the system. |
| STR svcDhcpProxyError | 1.3.6.1.4.1.6527.3.1.2.4.6.37 | DisplayString | accessible-for-notify | The value of the object svcDhcpProxyError indicates the reason why the proxy server failed to operate. |
| IP svcDhcpRestoreLseStateCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.18 | IpAddress | accessible-for-notify | The value of the object svcDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap. |
| STR svcDhcpRestoreLseStateProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.19 | DisplayString | accessible-for-notify | The value of the object svcDhcpRestoreLseStateProblem indicates why the persistency record cannot be restored. |
| STR svcDhcpSubAuthError | 1.3.6.1.4.1.6527.3.1.2.4.6.39 | DisplayString | accessible-for-notify | The value of the object svcDhcpSubAuthError is a printable character string which contains information about the problem that occurred while trying to authenticate the subscriber. |
| U32 svcEndPointActiveHoldDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.11 | Unsigned32 | read-create | The value of svcEndPointActiveHoldDelay specifies the amount of time in deci-seconds to hold the active state before going into the standby state when a local MC-LAG SAP goes down. |
| T/F svcEndPointAutoLearnMacProtect | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.32 | TruthValue | read-create | The value of svcEndPointAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the SDP associated with this endpoint. |
| T/F svcEndPointBlockOnMeshFail | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.24 | TruthValue | read-create | The value of svcEndPointBlockOnMeshFail specifies that the operational status of spoke-SDPs in the endpoint will be affected by the operational status of associated mesh SDPs in this service. If there are no mesh SDPs in the service, value of this object is ignored. When this object is set to 'true', then the operational status of the spoke-SDPs in the endpoint will be 'down' until the operational status of at least one mesh SDP in this service is 'up'. When set to 'false', the operational status of the spoke-SDPs in the endpoint will not be affected by the operational status of any mesh SDPs in the service. |
| SER svcEndPointDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.3 | ServObjDesc | read-create | The value of svcEndPointDescription specifies the textual description of this service endpoint. |
| svcEndPointEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1 | not-accessible | Each row entry represents a particular service endpoint. Entries are created/deleted by the user. | |
| TMN svcEndPointForceSwitchOver | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.9 | TmnxActionType | read-create | The value of svcEndPointForceSwitchOver specifies whether to force a switchover of the active SDP bind. When it is set to 'doAction', the SDP bind specified by svcEndPointForceSwitchOverSdpId will become active. |
| SDP svcEndPointForceSwitchOverSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.10 | SdpBindId | read-create | The value of svcEndPointForceSwitchOverSdpId specifies the SDP bind to switch over to when svcEndPointForceSwitchOver is set to 'doAction'. If the value of this object is non default, it indicates that a forced switchover has taken place. Setting this object to the default value clears any previous forced switchover. |
| TMN svcEndPointForceSwitchOvrSdpFec | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.28 | TmnxSpokeSdpIdOrZero | read-create | The value of svcEndPointForceSwitchOvrSdpFec specifies the multi-segment pseudo-wire provide-edge identifier to switch over to when svcEndPointForceSwitchOver is set to 'doAction'. If the value of this object is set to non-default, it indicates that a forced switchover has taken place. Setting this object to the default value clears any previous forced switchover. |
| T/F svcEndPointIgnoreStandbySig | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.12 | TruthValue | read-create | The value of svcEndPointIgnoreStandbySig specifies whether the local internal tasks will take into account the 'pseudo-wire forwarding standby' bit received from the LDP peer which is normally ignored. When set to 'true', this bit is not considered in the internal tasks. A similar object sdpBindTlsIgnoreStandbySig is present at the SDP level. The value of sdpBindTlsIgnoreStandbySig is set to the value of svcEndPointIgnoreStandbySig for the spoke-SDP associated with this endpoint. |
| I32 svcEndPointMacLimit | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.14 | Integer32 | read-create | The value of the object svcEndPointMacLimit specifies the maximum number of learned and static entries allowed for this end-point. The value 0 means: no limit for this end-point. When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'a' or 'b', the maximum value of this object is '131071'. When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'c', the maximum value of this object is '196607'. When the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'd', the maximum value of this object is '511999'. |
| NTF svcEndPointMacLimitAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.19 | The svcEndPointMacLimitAlarmCleared notification is sent whenever the number of MAC addresses stored in the FDB for this endpoint drops below the watermark specified by the object svcTlsFdbTableFullLowWatermark. This alarm also takes into consideration static MAC addresses configured on the endpoint and learned MAC addresses in all spokes associated with this endpoint. | ||
| NTF svcEndPointMacLimitAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.18 | The svcEndPointMacLimitAlarmRaised notification is sent whenever the number of MAC addresses stored in the FDB for this endpoint exceeds the watermark specified by the object svcTlsFdbTableFullHighWatermark. This alarm also takes into consideration static MAC addresses configured on the endpoint and learned MAC addresses in all spokes associated with this endpoint. | ||
| TMN svcEndPointMacPinning | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.13 | TmnxEnabledDisabled | read-create | The value of svcEndPointMacPinning specifies whether or not MAC address pinning is active on this end-point. |
| U32 svcEndPointMCEPId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.20 | Unsigned32 | read-create | The value of svcEndPointMCEPId specifies the multi-chassis end-point identifier assigned to this endpoint. |
| IP svcEndPointMCEPPeerAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.22 | InetAddress | read-create | The value of svcEndPointMCEPPeerAddr specifies the IP address of multi-chassis end-point peer. An 'inconsistentValue' error is returned if this object is set to non-default value when svcEndPointMCEPId is set to its default value. An 'inconsistentValue' error is returned if this object is set to non-default value when svcEndPointMCEPPeerName is set to its non-default value. |
| IPt svcEndPointMCEPPeerAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.21 | InetAddressType | read-create | The value of svcEndPointMCEPPeerAddrType specifies the address type of svcEndPointMCEPPeerAddr object. An 'inconsistentValue' error is returned if this object is set to non-default value when svcEndPointMCEPId is set to its default value. An 'inconsistentValue' error is returned if this object is set to non-default value when svcEndPointMCEPPeerName is set to its non-default value. |
| TNA svcEndPointMCEPPeerName | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.23 | TNamedItemOrEmpty | read-create | The value of svcEndPointMCEPPeerName specifies the name of multi-chassis end-point peer TIMETRA-MC-REDUNDANCY-MIB::tmnxMcPeerName. An 'inconsistentValue' error is returned if this object is set to non-default value when svcEndPointMCEPId is set to its default value. An 'inconsistentValue' error is returned if this object is set to non-default value when svcEndPointMCEPPeerAddrType and svcEndPointMCEPPeerAddr are set to their non-default values. |
| T/F svcEndPointMCEPPsvModeActive | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.25 | TruthValue | read-only | The value of svcEndPointMCEPPsvModeActive indicates whether passive-mode behavior is currently active on this multi-chassis end-point. |
| TNA svcEndPointName | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.1 | TNamedItem | not-accessible | The value of svcEndPointName specifies the name of the service endpoint. |
| T/F svcEndPointRestProtSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.30 | TruthValue | read-create | The value of the object svcEndPointRestProtSrcMac indicates how the agent will handle relearn requests for protected MAC addresses received on the SDP belonging to this endpoint. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of svcEndPointRestProtSrcMacAction is 'disable', then the SDP belonging to the endpoint where the protected source MAC was seen will be brought operationally down. |
| INT svcEndPointRestProtSrcMacAction | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.31 | INTEGER | read-create | The value of the object svcEndPointRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on the SDP belonging to this endpoint. When the value of this object is 'disable' the SDP belonging to this endpoint will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SDP belonging to this endpoint will be left up and only a notification, TIMETRA-SDP-MIB::sdpBindReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SDP will start discarding the frame in addition to generating TIMETRA-SDP-MIB::sdpBindReceivedProtSrcMac notification. |
| I32 svcEndPointRevertTime | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.4 | Integer32 | read-create | The value of svcEndPointRevertTime specifies the time to wait before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a backup spoke-sdp. When the value is '-1', the spoke-sdp will never revert back. |
| I32 svcEndPointRevertTimeCountDn | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.16 | Integer32 | read-only | The value of svcEndPointRevertTimeCountDn indicates the timer count down before reverting back to the primary spoke-sdp defined on this service endpoint, after having failed over to a backup spoke-sdp. This timer count down begins after primary Spoke SDP becomes operational. The value of -1 indicates when revert is not-applicable. |
| ROW svcEndPointRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.2 | RowStatus | read-create | The value of svcEndPointRowStatus is used for the creation and deletion of service endpoints. |
| T/F svcEndPointStandbySigMaster | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.26 | TruthValue | read-create | The value of svcEndPointStandbySigMaster specifies whether PW standby bit will be sent to T-LDP peer whenever spoke-SDPs of this endpoint are selected as standby. |
| T/F svcEndPointStandbySigSlave | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.27 | TruthValue | read-create | The value of svcEndPointStandbySigSlave specifies whether transmission of any spoke in the endpoint will be blocked when the spoke receives standby status notification from its peer. |
| T/F svcEndPointSuppressStandbySig | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.15 | TruthValue | read-create | The value of the object svcEndPointSuppressStandbySig specifies whether the 'pseudo wire forwarding standby' bit will be sent to the LDP peer whenever the spoke SDP 'svcEndPointTxActiveSdpId' is selected as standby. When set to 'true', this bit will not be sent. |
| svcEndPointTable | 1.3.6.1.4.1.6527.3.1.2.4.2.19 | not-accessible | The svcEndPointTable has an entry for each service endpoint configured on this system. | |
| C32 svcEndPointTxActiveChangeCount | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.17 | Counter32 | read-only | The value of svcEndPointTxActiveChangeCount indicates the number of times active transmit change has taken place in this endpoint. |
| TMN svcEndPointTxActiveEncap | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.7 | TmnxEncapVal | read-only | The value of svcEndPointTxActiveEncap indicates the encapsulation value of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'. |
| TIM svcEndPointTxActiveLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.18 | TimeStamp | read-only | The value of svcEndPointTxActiveLastChange indicates the value of sysUpTime at the time of the last active transmit change in this endpoint. |
| TMN svcEndPointTxActivePortId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.6 | TmnxPortID | read-only | The value of svcEndPointTxActivePortId indicates the Port ID of the SAP that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sap'. |
| TMN svcEndPointTxActiveSdpFec | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.29 | TmnxSpokeSdpIdOrZero | read-only | The value of svcEndPointTxActiveSdpFec indicates the multi- segment pseudo-wire provider-edge identifier that is transmit active. This object is only valid when svcEndPointTxActiveType is set to 'sdpFec'. |
| SDP svcEndPointTxActiveSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.8 | SdpBindId | read-only | The value of svcEndPointTxActiveSdpId indicates the SDP bind ID of the SDP bind that is transmit active. This object is only valid when svcEndPointTxActiveType is 'sdpBind'. |
| INT svcEndPointTxActiveType | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.5 | INTEGER | read-only | The value of svcEndPointTxActiveType indicates the type of end-point object that is current transmit active. |
| TIK svcEndPointTxActiveUpTime | 1.3.6.1.4.1.6527.3.1.2.4.2.19.1.19 | TimeTicks | read-only | The value of svcEndPointTxActiveUpTime indicates the active 'up' time (in hundredths of a second) of the end-point object that is current transmit active. |
| svcEpipeBackboneEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.73.1 | not-accessible | Each row entry contains objects that allows the modification of the PBB objects for an 'epipe' service. | |
| T/F svcEpipeBackboneForceQTagFwd | 1.3.6.1.4.1.6527.3.1.2.4.2.73.1.2 | TruthValue | read-write | The value of svcEpipeBackboneForceQTagFwd specifies whether to enable addition of an IEEE 802.1q tag after the Customer MAC address when the PBB header is built, as it egresses related 'b-vpls' service. |
| TIM svcEpipeBackboneLastChngd | 1.3.6.1.4.1.6527.3.1.2.4.2.73.1.1 | TimeStamp | read-only | The value of svcEpipeBackboneLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| svcEpipeBackboneTable | 1.3.6.1.4.1.6527.3.1.2.4.2.73 | not-accessible | The svcEpipeBackboneTable contains objects related to Provider Backbone Bridging (PBB) feature as relates to 'epipe' services. Entries are created and destroyed when 'epipe' services are created and destroyed by the system. | |
| TIM svcEpipeBackboneTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.72 | TimeStamp | read-only | The value of svcEpipeBackboneTableLastChanged indicates the sysUpTime at the time of the last modification of svcEpipeBackboneTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| svcEpipeEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.71.1 | not-accessible | Each row entry contains objects that allows the modification of the 'epipe' specific objects. | |
| TIM svcEpipeLastChngd | 1.3.6.1.4.1.6527.3.1.2.4.2.71.1.1 | TimeStamp | read-only | The value of svcEpipeLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| MAC svcEpipePbbBvplsDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.4 | MacAddress | read-create | The value of svcEpipePbbBvplsDstMac specifies the Backbone Destination MAC-Address for Provider Backbone Bridging packets. An 'inconsistentValue' error is returned if svcEpipePbbBvplsDstMac or svcEpipePbbBvplsDstMacName object is not set to non-default value. |
| TNA svcEpipePbbBvplsDstMacName | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.10 | TNamedItemOrEmpty | read-create | The value of svcEpipePbbBvplsDstMacName specifies the Backbone Destination MAC-Address-Name for Provider Backbone Bridging packets. An 'inconsistentValue' error is returned if svcEpipePbbBvplsDstMac or svcEpipePbbBvplsDstMacName object is not set to non-default value. |
| MAC svcEpipePbbBvplsOperDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.9 | MacAddress | read-only | The value of svcEpipePbbBvplsOperDstMac indicates the operational Backbone Destination MAC-Address for Provider Backbone Bridging packets. |
| TMN svcEpipePbbBvplsSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.3 | TmnxServId | read-create | The value of svcEpipePbbBvplsSvcId specifies the Backbone-VPLS service for the PBB tunnel associated with this service. This object must be set at the creation time and can not be modified later. |
| svcEpipePbbEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1 | not-accessible | Each row entry contains objects that allows the modification of the PBB objects for an 'epipe' service. | |
| T/F svcEpipePbbFlooding | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.7 | TruthValue | read-only | The value of the object svcEpipePbbFlooding indicates the state for traffic flowing into the Backbone-VPLS through PBB tunnel. If the backbone-destination MAC is found in the FDB of Backbone-VPLS then traffic will be sent to specific SAP/SDP and this object will be set to 'false'. In case of SPB Managed Backbone-VPLS, if backbone-destination MAC is not found in the FDB of Backbone-VPLS then traffic will not be sent out of any SAP/SDP and this object will be set to 'false'. Otherwise, traffic will be flooded to all SAP/SDP bindings in the Backbone-VPLS and the object will be set to 'true'. |
| TIM svcEpipePbbLastChngd | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.2 | TimeStamp | read-only | The value of svcEpipePbbLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM svcEpipePbbLastStatusChange | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.8 | TimeStamp | read-only | The value of the object svcEpipePbbLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to this tunnel. |
| SER svcEpipePbbOperState | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.6 | ServiceOperStatus | read-only | The value of the object svcEpipePbbOperState indicates the operating state of PBB tunnel associated with this service. |
| NTF svcEpipePbbOperStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.28 | The svcEpipePbbOperStatusChanged notification is generated when there is a change in the operating status of the PBB tunnel associated with this E-pipe service. | ||
| ROW svcEpipePbbRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.1 | RowStatus | read-create | The value of svcEpipePbbRowStatus is used for the creation and deletion of Provider Backbone Bridging information in a EPIPE service. To create an entry in the table, svcEpipePbbBvplsSvcId, svcEpipePbbSvcISID objects must be set along with svcEpipePbbBvplsDstMac or svcEpipePbbBvplsDstMacName object set to non-default value. |
| SVC svcEpipePbbSvcISID | 1.3.6.1.4.1.6527.3.1.2.4.2.37.1.5 | SvcISID | read-create | The value of the object svcEpipePbbSvcISID specifies a 24 bit (0..16777215) service instance identifier for the PBB tunnel associated with this service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. This object must be set along with svcEpipePbbBvplsSvcId. |
| svcEpipePbbTable | 1.3.6.1.4.1.6527.3.1.2.4.2.37 | not-accessible | The svcEpipePbbTable contains objects related to Provider Backbone Bridging (PBB) feature as relates to 'epipe' services. Entries are created and destroyed using svcEpipePbbRowStatus object. | |
| TIM svcEpipePbbTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.36 | TimeStamp | read-only | The value of svcEpipePbbTableLastChanged indicates the sysUpTime at the time of the last modification of svcEpipePbbTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcEpipePerSvcHashing | 1.3.6.1.4.1.6527.3.1.2.4.2.71.1.2 | TmnxEnabledDisabled | read-write | The value of svcEpipePerSvcHashing specifies service-level hashing for Ethernet services. |
| svcEpipeTable | 1.3.6.1.4.1.6527.3.1.2.4.2.71 | not-accessible | The svcEpipeTable contains objects related to 'epipe' services. Entries are created and destroyed when 'epipe' services are created and destroyed by the system. | |
| TIM svcEpipeTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.70 | TimeStamp | read-only | The value of svcEpipeTableLastChanged indicates the sysUpTime at the time of the last modification of svcEpipeTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| NTF svcEPMCEPConfigMismatch | 1.3.6.1.4.1.6527.3.1.3.4.2.0.29 | The svcEPMCEPConfigMismatch notification is generated when service multi-chassis endpoint detects a mismatch in the config of the multi-chassis endpoint peer. | ||
| NTF svcEPMCEPConfigMismatchResolved | 1.3.6.1.4.1.6527.3.1.3.4.2.0.30 | The svcEPMCEPConfigMismatchResolved notification is generated when multi-chassis endpoint resolves the mismatch in the config of the multi-chassis endpoint peer. | ||
| NTF svcEPMCEPPassiveModeActive | 1.3.6.1.4.1.6527.3.1.3.4.2.0.31 | The svcEPMCEPPassiveModeActive notification is generated when multi-chassis endpoint on a multi-chassis peer in passive-mode (of multi-chassis peer) becomes passive-mode active by detecting more than one active spoke-sdp in the multi-chassis endpoint with 'pwFwdingStandby' bit cleared per sdpBindPwPeerStatusBits object. | ||
| NTF svcEPMCEPPassiveModePassive | 1.3.6.1.4.1.6527.3.1.3.4.2.0.32 | The svcEPMCEPPassiveModePassive notification is generated when multi-chassis endpoint on a multi-chassis peer in passive-mode (of multi-chassis peer) becomes passive-mode passive by detecting at most one active spoke-sdp in the multi-chassis endpoint with 'pwFwdingStandby' bit set per sdpBindPwPeerStatusBits object. | ||
| svcEpMcEpStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.56.1 | not-accessible | Each row entry represents a collection of statistics for a end-point that participates in a multi-chassis configuration with a given peer. Entries cannot be created and deleted via SNMP SET operations. | |
| C32 svcEpMcEpStatsPktsRxConfig | 1.3.6.1.4.1.6527.3.1.2.4.2.56.1.1 | Counter32 | read-only | The value of svcEpMcEpStatsPktsRxConfig indicates how many multi-chassis end-point control packets of type end-point config were received on this system from the peer for this end-point. |
| C32 svcEpMcEpStatsPktsRxState | 1.3.6.1.4.1.6527.3.1.2.4.2.56.1.2 | Counter32 | read-only | The value of svcEpMcEpStatsPktsRxState indicates how many multi-chassis end-point control packets of type end-point state were received on this system from the peer for this end-point. |
| C32 svcEpMcEpStatsPktsTxConfig | 1.3.6.1.4.1.6527.3.1.2.4.2.56.1.3 | Counter32 | read-only | The value of svcEpMcEpStatsPktsTxConfig indicates how many multi-chassis end-point control packets of type end-point config were sent on this system to the peer for this end-point. |
| C32 svcEpMcEpStatsPktsTxFailed | 1.3.6.1.4.1.6527.3.1.2.4.2.56.1.5 | Counter32 | read-only | The value of svcEpMcEpStatsPktsTxFailed indicates how many multi-chassis end-point control packets failed to be transmitted on this system to the peer for this end-point. |
| C32 svcEpMcEpStatsPktsTxState | 1.3.6.1.4.1.6527.3.1.2.4.2.56.1.4 | Counter32 | read-only | The value of svcEpMcEpStatsPktsTxState indicates how many multi-chassis end-point control packets of type end-point state were sent on this system to the peer for this end-point. |
| svcEpMcEpStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.56 | not-accessible | The svcEpMcEpStatsTable has an entry for each end-point that participates in a multi-chassis configuration for the indicated peer. | |
| svcEthCfmEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.112.1 | not-accessible | The svcEthCfmEntry consists of the Eth-CFM objects used to maintain Ethernet CFM functionality for the specified Ethernet capable Service. | |
| svcEthCfmTable | 1.3.6.1.4.1.6527.3.1.2.4.2.112 | not-accessible | The svcEthCfmTable contains Ethernet Connectivity Fault Management (CFM) information for Ethernet capable Services. | |
| TIM svcEthCfmTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.111 | TimeStamp | read-only | The value of svcEthCfmTblLastChanged indicates the sysUpTime at the time of the last modification of svcEthCfmTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| INT svcEthCfmTunnelFaultNotification | 1.3.6.1.4.1.6527.3.1.2.4.2.112.1.1 | INTEGER | read-create | The value of svcEthCfmTunnelFaultNotification specifies whether the service will 'accept (1)' CFM fault notification from a Tunnel MEP and process the notification (i.e. do fault handling and/or fault propagation), or 'ignore (2)' the notification. Both TIMETRA-SAP-MIB::sapEthCfmTunnelFaultNotification and this object MUST be set to 'accept (1)' for an individual SAP to process the notification. |
| TMN svcEthCfmVMepExtensions | 1.3.6.1.4.1.6527.3.1.2.4.2.112.1.2 | TmnxEnabledDisabled | read-create | The value of svcEthCfmVMepExtensions specifies whether enhanced Virtual MEP functionality is enabled on the service or not. This object is used by TLS (VPLS) services only, and has no effect nor can it be modified on other service types. On services that do not support VMEP extensions this object is fixed to the value 'disabled (2)'. |
| NTF svcFdbMimDestTblFullAlrm | 1.3.6.1.4.1.6527.3.1.3.4.2.0.21 | The svcFdbMimDestTblFullAlrm notification is raised when system limit of Backbone MAC address indices limit is reached. Further traps are not generated as long as the value of svcTotalFdbMimDestIdxEntries object remains under 5 percent of the limit. | ||
| NTF svcFdbMimDestTblFullAlrmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.22 | The svcFdbMimDestTblFullAlrmCleared notification is raised when number of Backbone MAC address indices used reaches under 95 percent of the system limit after svcFdbMimDestTblFullAlrm notification had been raised. | ||
| T/F svcHashLabel | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.31 | TruthValue | read-create | The value of svcHashLabel specifies whether the use of hash-label is enabled or not on this service. |
| IP svcHostAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.48 | InetAddress | accessible-for-notify | The value of the object svcHostAddr indicates the IP address specified in the persistency record causing the trap. |
| IPt svcHostAddrType | 1.3.6.1.4.1.6527.3.1.2.4.6.47 | InetAddressType | accessible-for-notify | The value of the object svcHostAddrType indicates the address type of svcHostAddr. |
| TMN svcId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.1 | TmnxServId | read-only | The value of the object svcId specifies the Service identifier. This value should be unique within the service domain. |
| svcIfDHCP6MsgStatEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1 | not-accessible | Each row entry represents a collection of counters for each DHCP6 message type for an interface in a service. Entries cannot be created and deleted via SNMP SET operations. | |
| G32 svcIfDHCP6MsgStatsDropped | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.4 | Gauge32 | read-only | The value of svcIfDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped on this service interface. |
| TIM svcIfDHCP6MsgStatsLstClrd | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.1 | TimeStamp | read-only | The value of svcIfDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized. |
| G32 svcIfDHCP6MsgStatsRcvd | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.2 | Gauge32 | read-only | The value of svcIfDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received on this service interface. |
| G32 svcIfDHCP6MsgStatsSent | 1.3.6.1.4.1.6527.3.1.2.4.2.26.1.3 | Gauge32 | read-only | The value of svcIfDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent on this service interface. |
| svcIfDHCP6MsgStatTable | 1.3.6.1.4.1.6527.3.1.2.4.2.26 | not-accessible | The vRtrDHCP6MsgStatTable has an entry for each interface defined in a service for which DHCP6 can be enabled. | |
| TNA svcIfSapCfgDefAppProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.5 | TNamedItemOrEmpty | read-create | The value of svcIfSapCfgDefSlaProfile specifies the default application profile. |
| TNA svcIfSapCfgDefFilterProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.9 | TNamedItemOrEmpty | read-create | The value of the object svcIfSapCfgDefFilterProfile specifies the default filter profile. The specified filter profile needs to exists in the TIMETRA-SUBSCRIBER-MGMT-MIB::tmnxSubFilterProfileTable. |
| TNA svcIfSapCfgDefSlaProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.4 | TNamedItemOrEmpty | read-create | The value of svcIfSapCfgDefSlaProfile specifies the default SLA profile. |
| TMN svcIfSapCfgDefSubIdent | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.7 | TmnxDefSubIdSource | read-create | The value of svcIfSapCfgDefSubIdent specifies the default subscriber identification. This value is used in case no other source (like Radius) provides a subscriber identification string. If the value of this object is set to 'useSapId', the SAP-id will be used as the default subscriber identification string; in this case, svcIfSapCfgDefSubIdentString must contain the empty string, so any non-empty string in svcIfSapCfgDefSubIdentString will be set to an empty string. If the value of this object is set to 'useAutoId', the auto-generated subscriber identification string, as defined in tmnxSubMgmtAutoSubIdObjs, is used as the default subscriber identification string. In this case, svcIfSapCfgDefSubIdentString must contain the empty string, so any non-empty string in svcIfSapCfgDefSubIdentString will be set to an empty string. If the value of this object is set to 'useString', the value of svcIfSapCfgDefSubIdentString will be used as the default subscriber identification string; in this case, an empty svcIfSapCfgDefSubIdentString means that there is no default subscriber identification configured. |
| STR svcIfSapCfgDefSubIdentString | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.8 | DisplayString | read-create | The value of svcIfSapCfgDefSubIdentString specifies the default subscriber identification string. |
| TNA svcIfSapCfgDefSubProfile | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.3 | TNamedItemOrEmpty | read-create | The value of svcIfSapCfgDefSubProfile specifies the default subscriber profile. |
| TIT svcIfSapCfgDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.2 | TItemDescription | read-create | The value of svcIfSapCfgDescription specifies the description of this conceptual row. |
| svcIfSapCfgEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1 | not-accessible | SAP configuration applicable to internal SAP's associated with a specific group interface. Unlike regular subscriber traffic, that enters the system through Service Access Points (SAP) on a group-interface, some user traffic enters the system through a plain layer 3 interface; this traffic is relayed for processing to an ISA MDA; it re-enters through an internal SAP on an internal group interface; this entry allows to configure certain SAP parameters for those internal SAP's. Current examples of such traffic are - traffic for PPP subscriber sessions terminated by the LNS function, - Wifi offload traffic, entering the system through a Soft-GRE tunnel. | |
| TIM svcIfSapCfgLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.1 | TimeStamp | read-only | The value of svcIfSapCfgLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| TNA svcIfSapCfgSubIdentPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.129.1.6 | TNamedItemOrEmpty | read-create | The value of svcIfSapCfgSubIdentPolicy specifies the subscriber identification policy. |
| svcIfSapCfgTable | 1.3.6.1.4.1.6527.3.1.2.4.2.129 | not-accessible | The svcIfSapCfgTable contains objects to configure (internal) SAP parameters for applicable group interfaces. Conceptual rows in this table are created and destroyed by the system. The system automatically creates a row in this table for each applicable row in the TIMETRA-SERV-MIB::iesIfTable; currently, applicable rows have the value of iesIfType is equal to 'group' and the value of iesIfGroupInterfaceType is equal to 'lns' or 'softGre'. Deletion of such a row in the iesIfTable results in the same fate for the corresponding row in this table. | |
| TIM svcIfSapCfgTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.128 | TimeStamp | read-only | The value of svcIfSapCfgTableLastChanged indicates the sysUpTime at the time of the last modification of svcIfSapCfgTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcIgmpTrkAdminState | 1.3.6.1.4.1.6527.3.1.2.4.2.50.1.2 | TmnxAdminState | read-write | The value of the object svcIgmpTrkAdminState specifies the administrative state of the IGMP host tracking in this service. |
| svcIgmpTrkEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.50.1 | not-accessible | IGMP host tracking information about a specific service. | |
| U32 svcIgmpTrkExpiryTime | 1.3.6.1.4.1.6527.3.1.2.4.2.50.1.3 | Unsigned32 | read-write | The value of the object svcIgmpTrkExpiryTime specifies the time in seconds that this system continues to track an inactive host. |
| svcIgmpTrkGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.131 | The group of objects supporting management of Services IGMP host tracking capabilities on Alcatel-Lucent SROS series systems. | ||
| TIM svcIgmpTrkLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.50.1.1 | TimeStamp | read-only | The value of svcIgmpTrkLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| svcIgmpTrkTable | 1.3.6.1.4.1.6527.3.1.2.4.2.50 | not-accessible | A table that contains IGMP host tracking information of a service. | |
| TIM svcIgmpTrkTableLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.49 | TimeStamp | read-only | The value of svcIgmpTrkTableLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to the svcIgmpTrkTable. |
| T/F svcInterASMvpn | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.30 | TruthValue | read-create | The value of the object svcInterASMvpn specifies if the configured VPRN service is used for inter-AS MVPN or not. If the value of the object is set to 'true', the VPRN service is used for inter-AS MVPN only. If the value of the object is set to 'false', the VPRN service is not used for inter-AS MVPN. |
| TMN svcIpipeCeAddressDiscovery | 1.3.6.1.4.1.6527.3.1.2.4.2.52.1.2 | TmnxEnabledDisabled | read-write | The value of the object svcIpipeCeAddressDiscovery specifies whether the service will automatically discover the CE IP addresses. If 'enabled', the addresses will be automatically discovered on SAPs that support address discovery, and on the Spoke SDPs. When 'enabled', addresses configuration on the Ipipe SAP and Spoke SDPs will not be allowed. If 'disabled', CE IP addresses need to be manually configured for the SAPs to become operationally 'up'. svcIpipeCeAddressDiscovery cannot be disabled if svcIpipeIpv6CeAddressDiscovery is 'enabled'. |
| svcIpipeInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.52.1 | not-accessible | IPIPE specific information about a service. | |
| TIM svcIpipeInfoLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.52.1.1 | TimeStamp | read-only | The value of svcIpipeInfoLastMgmtChange indicates the value of sysUpTime at the time of the most recent management change to this row. |
| svcIpipeInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.52 | not-accessible | A table that contains IPIPE service information. | |
| TIM svcIpipeInfoTableLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.51 | TimeStamp | read-only | The value of svcIpipeInfoTableLastMgmtChange indicates the timestamp of last change to the svcIpipeInfoTable. |
| TMN svcIpipeIpv6CeAddressDiscovery | 1.3.6.1.4.1.6527.3.1.2.4.2.52.1.3 | TmnxEnabledDisabled | read-write | The value of the object svcIpipeIpv6CeAddressDiscovery specifies whether the service will automatically discover the CE IPv6 addresses. If 'enabled', the addresses will be automatically discovered on SAPs that support address discovery, and on the Spoke SDPs. When 'enabled', addresses configuration on the Ipipe SAP and Spoke SDPs will not be allowed. If 'disabled', CE IP addresses need to be manually configured for the SAPs to become operationally 'up'. svcIpipeIpv6CeAddressDiscovery can only be enabled if svcIpipeCeAddressDiscovery is 'enabled' first. |
| TMN svcIpipeStackCapabilitySignaling | 1.3.6.1.4.1.6527.3.1.2.4.2.52.1.4 | TmnxEnabledDisabled | read-write | The value of the object svcIpipeStackCapabilitySignaling specifies whether this service should send the Stack Capability or not, and check whether the capability is received from the peer via LDP interface parameters. If 'enabled' and svcIpipeIpv6CeAddressDiscovery is also 'enabled', the Stack Capability interface parameter will be sent via LDP to the far end peer. As well, if one is not received from the peer, the label for this service will be released. If 'disabled', the capability will not be advertised to the peer, and the presence or absence of this capability from the peer is ignored. |
| TMN svcIpRouting | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.5 | TmnxEnabledDisabled | read-create | The value of the object svcIpRouting specifies, for a 'tls' service, whether IP routing is enabled. For 'epipe', 'p3pipe', 'apipe', 'fpipe', 'ipipe' and 'cpipe' services, this object cannot be set and has the value 'disabled', whereas for 'vprn' and 'ies' services the value is 'enabled' and cannot be set either. For 'tls' services the value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| T/F svcL2MhRteDf | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1.6 | TruthValue | read-only | The value of svcL2MhRteDf indicates the value of DF bit associated with this multi-home L2 route entry. |
| svcL2MhRteEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1 | not-accessible | A multi-home L2 route entry in the svcL2MhRteTable. | |
| IP svcL2MhRteNextHop | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1.4 | InetAddress | not-accessible | The value of svcL2MhRteNextHop indicates the IP next hop for this L2 route. This value is equivilant to the IP address of the Far End of this L2 route. |
| IPt svcL2MhRteNextHopType | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1.3 | InetAddressType | not-accessible | The value of svcL2MhRteNextHopType indicates the address type of svcL2MhRteNextHop. |
| TMN svcL2MhRteRouteDistinguisher | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1.2 | TmnxVPNRouteDistinguisher | not-accessible | The value of svcL2MhRteRouteDistinguisher is the high-order 6 bytes of the Virtual Switch Instance identifier (VSI-id) of the remote VSI for this L2 route. |
| TMN svcL2MhRteSiteId | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1.1 | TmnxSiteId | not-accessible | The value of svcL2MhRteSiteId is the site-id for this L2 route. |
| INT svcL2MhRteState | 1.3.6.1.4.1.6527.3.1.2.4.2.83.1.5 | INTEGER | read-only | The value of svcL2MhRteState indicates the state of this multi-home L2 route entry. |
| svcL2MhRteTable | 1.3.6.1.4.1.6527.3.1.2.4.2.83 | not-accessible | svcL2MhRteTable contains multi-home entries for L2 routes. | |
| TIM svcLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.12 | TimeStamp | read-only | The value of of the object svcLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this service. |
| TIM svcLastStatusChange | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.17 | TimeStamp | read-only | The value of the object svcLastStatusChange indicates the value of sysUpTime at the time of the most recent operating status change to his service. |
| U32 svcMacFdbRecords | 1.3.6.1.4.1.6527.3.1.2.4.2.113.1 | Unsigned32 | read-only | The value of the object svcMacFdbRecords indicates the number of system wide FDB records in use. |
| NTF svcMacFdbTblFullAlarm | 1.3.6.1.4.1.6527.3.1.3.4.2.0.36 | [CAUSE] The svcMacFdbTblFullAlarm notification is raised when system limit of FDB records is reached. Further traps are not generated as long as the value of svcMacFdbRecords object remains under 5 percent of the limit. [EFFECT] System will not be able to add new MAC addresses to the FDB table. [RECOVERY] Optimize the MAC FDB addresses assigned to different services. | ||
| NTF svcMacFdbTblFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.37 | [CAUSE] The svcMacFdbTblFullAlarmCleared notification is raised when number of FDB records used reaches under 95 percent of the system limit after svcMacFdbTblFullAlarm notification had been raised. [EFFECT] System will now be able to add new MAC addresses to the FDB table. [RECOVERY] None. | ||
| TNA svcMacName | 1.3.6.1.4.1.6527.3.1.2.4.2.59.1.1 | TNamedItem | not-accessible | The value of svcMacName specifies the name associated with a MAC address. |
| MAC svcMacNameAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.59.1.4 | MacAddress | read-create | The value of svcMacNameAddr specifies the MAC-Address associated with the name defined in svcMacName. This object must be set at the creation time. |
| svcMacNameEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.59.1 | not-accessible | Each row entry contains objects that allows the modification of the MAC-name objects. | |
| TIM svcMacNameLastChngd | 1.3.6.1.4.1.6527.3.1.2.4.2.59.1.3 | TimeStamp | read-only | The value of svcMacNameLastChngd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcMacNameRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.59.1.2 | RowStatus | read-create | The value of svcMacNameRowStatus is used for the creation and deletion of MAC information. To create an entry in the table, svcMacNameAddr object must be set. |
| svcMacNameTable | 1.3.6.1.4.1.6527.3.1.2.4.2.59 | not-accessible | The svcMacNameTable contains objects related to MAC-name feature. Entries are created and destroyed using svcMacNameRowStatus object. | |
| TIM svcMacNameTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.58 | TimeStamp | read-only | The value of svcMacNameTableLastChanged indicates the sysUpTime at the time of the last modification of svcMacNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcMacNotifCount | 1.3.6.1.4.1.6527.3.1.2.4.2.60.2 | Unsigned32 | read-write | The value of svcMacNotifCount specifies number of MAC notification messages to be sent. |
| svcMacNotificationGroup | 1.3.6.1.4.1.6527.3.1.2.4.2.60 | |||
| U32 svcMacNotifInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.60.1 | Unsigned32 | read-write | The value of svcMacNotifInterval specifies time-interval between subsequent MAC notification messages. |
| T/F svcMgmtVpls | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.19 | TruthValue | read-create | The value of the object svcMgmtVpls specifies, only if svcType = 'tls' whether or not the service is a management vpls. If set to false the service is acting as a regular VPLS service. If set to true, the service is acting as a management VPLS service. This implies that RSTP will always be enabled, and that the conclusions of this RSTP can be associated to different (regular) VPLSs. The value of this object cannot be changed after creation. |
| TIM svcMrpPlcyParamsISIDTblLastChgd | 1.3.6.1.4.1.6527.3.1.2.4.2.68 | TimeStamp | read-only | The value of svcMrpPlcyParamsISIDTblLastChgd indicates the sysUpTime at the time of the last modification of svcMrpPolicyParamsISIDTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM svcMrpPlcyParamsTblLastChgd | 1.3.6.1.4.1.6527.3.1.2.4.2.66 | TimeStamp | read-only | The value of svcMrpPlcyParamsTblLastChgd indicates the sysUpTime at the time of the last modification of svcMrpPolicyParamsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM svcMrpPlcyTableLastChgd | 1.3.6.1.4.1.6527.3.1.2.4.2.64 | TimeStamp | read-only | The value of svcMrpPlcyTableLastChgd indicates the sysUpTime at the time of the last modification of svcMrpPolicyTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMR svcMrpPolicyDefaultAction | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1.6 | TMrpPolicyDefaultAction | read-create | The value of TMrpPolicyDefaultAction specifies the action to take for packets that do not match any mrp-policy entries. |
| TIT svcMrpPolicyDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1.4 | TItemDescription | read-create | The value of svcMrpPolicyDescription specifies the user provided description of this mrp-policy. |
| svcMrpPolicyEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1 | not-accessible | svcMrpPolicyEntry contains the information about a particular mrp-policy. | |
| TIM svcMrpPolicyLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1.3 | TimeStamp | read-only | The value of svcMrpPolicyLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TNA svcMrpPolicyName | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1.1 | TNamedItem | not-accessible | The value of svcMrpPolicyName specifies a specific mrp-policy. |
| TMR svcMrpPolicyParamsAction | 1.3.6.1.4.1.6527.3.1.2.4.2.67.1.5 | TMrpPolicyAction | read-create | The value of svcMrpPolicyParamsAction specifies the action to take for packets that match this mrp-policy entry. |
| TIT svcMrpPolicyParamsDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.67.1.4 | TItemDescription | read-create | The value of svcMrpPolicyParamsDescription specifies the user provided description of this mrp-policy entry. |
| svcMrpPolicyParamsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.67.1 | not-accessible | svcMrpPolicyParamsEntry contains the information about a particular mrp-policy entry. | |
| TEN svcMrpPolicyParamsEntryId | 1.3.6.1.4.1.6527.3.1.2.4.2.67.1.1 | TEntryId | not-accessible | The value of svcMrpPolicyParamsEntryId serves as a secondary index for each entry of a given mrp-policy. |
| svcMrpPolicyParamsISIDEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.69.1 | not-accessible | svcMrpPolicyParamsISIDTable contains the information about an ISID value/range in a particular mrp-policy entry. | |
| SVC svcMrpPolicyParamsISIDHigh | 1.3.6.1.4.1.6527.3.1.2.4.2.69.1.2 | SvcISID | read-create | The value of svcMrpPolicyParamsISIDHigh specifies the highest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The value of this field can be equal to but not lower than the value of the svcMrpPolicyParamsISIDLow field. If this field is modified in an existing row of this table, the new value will be silently rejected if it's lower than the existing value of svcMrpPolicyParamsISIDHigh. |
| TIM svcMrpPolicyParamsISIDLastChgd | 1.3.6.1.4.1.6527.3.1.2.4.2.69.1.4 | TimeStamp | read-only | The value of svcMrpPolicyParamsISIDLastChgd indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| SVC svcMrpPolicyParamsISIDLow | 1.3.6.1.4.1.6527.3.1.2.4.2.69.1.1 | SvcISID | not-accessible | The value of svcMrpPolicyParamsISIDLow specifies the lowest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry and is used as third key of this MIB table. The value of this field can be equal to but not higher than the value of the svcMrpPolicyParamsISIDHigh field. |
| ROW svcMrpPolicyParamsISIDRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.69.1.3 | RowStatus | read-create | This value of the object svcMrpPolicyParamsISIDRowStatus specifies the status of this row. |
| svcMrpPolicyParamsISIDTable | 1.3.6.1.4.1.6527.3.1.2.4.2.69 | not-accessible | The svcMrpPolicyParamsISIDTable has an entry for each ISID value/range in a particular mrp policy entry. | |
| TIM svcMrpPolicyParamsLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.67.1.3 | TimeStamp | read-only | The value of svcMrpPolicyParamsLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcMrpPolicyParamsRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.67.1.2 | RowStatus | read-create | This value of the object svcMrpPolicyParamsRowStatus specifies the status of this row. |
| svcMrpPolicyParamsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.67 | not-accessible | The svcMrpPolicyParamsTable has an entry for each mrp-policy entry. | |
| ROW svcMrpPolicyRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1.2 | RowStatus | read-create | This value of the object svcMrpPolicyRowStatus specifies the status of this row. |
| TIT svcMrpPolicyScope | 1.3.6.1.4.1.6527.3.1.2.4.2.65.1.5 | TItemScope | read-create | The value of svcMrpPolicyScope specifies the scope of this mrp-policy definition. If defined as exclusive(1), this mrp-policy can be instantiated only once as compared to the multiple instances that the mrp-policy can have if defined as template(2). |
| svcMrpPolicyTable | 1.3.6.1.4.1.6527.3.1.2.4.2.65 | not-accessible | The svcMrpPolicyTable has an entry for each mrp-policy. | |
| SER svcMSPwPeAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.4 | ServiceAdminStatus | read-create | The value of svcMSPwPeAdminStatus specifies the administrative state of this multi-segment pseudo-wire provider-edge for this service. |
| TMN svcMSPwPeAgi | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.9 | TmnxVPNRouteDistinguisher | read-create | The value of svcMSPwPeAgi specifies the Attachment Group Identifier (AGI) portion of the Generalized Id FEC element of the pseudo-wire setup for this provider-edge in this service. |
| TMN svcMSPwPeAiiType | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.6 | TmnxAiiType | read-create | The value of svcMSPwPeAiiType specifies the Attachment Individual Identifier (AII) type to be used on this multi-segment pseudo-wire provider-edge for this service. |
| T/F svcMSPwPeAutoConfig | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.8 | TruthValue | read-create | The value of svcMSPwPeAutoConfig specifies whether multi-segment pseudo-wire provider-edge for this service should use auto-configuration. |
| TNA svcMSPwPeEndPoint | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.21 | TNamedItemOrEmpty | read-create | The value of svcMSPwPeEndPoint specifies the endpoint used by this multi-segment pseudo-wire provider-edge in this service. |
| svcMSPwPeEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1 | not-accessible | Multi-segment pseudo-wire provider-edge specific information for this service. | |
| TMN svcMSPwPeFecType | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.5 | TmnxLdpFECType | read-create | The value of svcMSPwPeFecType specifies the LDP FEC type to be used on this multi-segment pseudo-wire provider-edge for this service. |
| TMN svcMSPwPeId | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.1 | TmnxSpokeSdpId | not-accessible | The value of the object svcMSPwPeId specifies the multi-segment pseudo-wire provider-edge identifier for this service. |
| T/F svcMSPwPeIsICB | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.23 | TruthValue | read-create | The value of svcMSPwPeIsICB specifies whether this sdp-binding is an inter-chassis backup SDP bind. |
| TIM svcMSPwPeLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.3 | TimeStamp | read-only | The value of svcMSPwPeLastChange indicates the timestamp of last change to this row in svcMSPwPeTable. |
| STR svcMSPwPeLastError | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.28 | DisplayString | read-only | The value of the object svcMSPwPeLastError indicates the last error encountered trying to bring up this multi-segment pseudo-wire provider-edge in this service. |
| SDP svcMSPwPeOperSdpBind | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.26 | SdpBindId | read-only | The value of svcMSPwPeOperSdpBind indicates operational SDP-bind used for this multi-segment pseudo-wire provider-edge in this service. |
| TNA svcMSPwPePathName | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.20 | TNamedItemOrEmpty | read-create | The value of svcMSPwPePathName specifies the path name used by this multi-segment pseudo-wire provider-edge in this service. |
| PWT svcMSPwPePolicyId | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.10 | PWTemplateId | read-create | The value of svcMSPwPePolicyId specifies the pseudo-wite template policy to be used on this multi-segment pseudo-wire provider-edge. |
| U32 svcMSPwPePrecedence | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.11 | Unsigned32 | read-create | The value of svcMSPwPePrecedence specifies the precedence of this multi-segment pseudo-wire provider-edge in this service. |
| U32 svcMSPwPeRetryCount | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.13 | Unsigned32 | read-create | The value of svcMSPwPeRetryCount specifies the retry count value to be used by this multi-segment pseudo-wire provider-edge in this service. System uses the value of svcPwRtRetryCount when value of this object is set to the default. |
| T/F svcMSPwPeRetryExpired | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.27 | TruthValue | read-only | The value of svcMSPwPeRetryExpired indicates whether all retries have expired for this multi-segment pseudo-wire provider-edge in this service. |
| U32 svcMSPwPeRetryRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.25 | Unsigned32 | read-only | The value of svcMSPwPeRetryRemain indicates remaining retries for this multi-segment pseudo-wire provider-edge in this service. |
| U32 svcMSPwPeRetryTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.12 | Unsigned32 | read-create | The value of svcMSPwPeRetryTimer specifies the retry timer value to be used by this multi-segment pseudo-wire provider-edge in this service. System uses the value of svcPwRtRetryTimer when value of this object is set to the default. |
| ROW svcMSPwPeRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.2 | RowStatus | read-create | This value of the object svcMSPwPeRowStatus specifies the status of this row. |
| U32 svcMSPwPeSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.16 | Unsigned32 | read-create | The value of svcMSPwPeSaiiAcId specifies the attachment circuit identifier part of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service. |
| TMN svcMSPwPeSaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.14 | TmnxPwGlobalIdOrZero | read-create | The value of svcMSPwPeSaiiGlobalId specifies the global identifier of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service. |
| U32 svcMSPwPeSaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.15 | Unsigned32 | read-create | The value of svcMSPwPeSaiiPrefix specifies the prefix to the Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service. |
| TMN svcMSPwPeSignaling | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.7 | TmnxMsPwPeSignaling | read-create | The value of svcMSPwPeSignaling specifies the type of signaling used by this multi-segment pseudo-wire provider-edge for this service. |
| T/F svcMSPwPeStandbySigSlave | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.22 | TruthValue | read-create | The value of svcMSPwPeStandbySigSlave specifies whether transmission of any spoke in the endpoint will be blocked when the spoke receives standby status notification from its peer. |
| svcMSPwPeTable | 1.3.6.1.4.1.6527.3.1.2.4.2.107 | not-accessible | A table that contains multi-segment pseudo-wire provider- edge information for the service. | |
| U32 svcMSPwPeTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.19 | Unsigned32 | read-create | The value of svcMSPwPeTaiiAcId specifies the attachment circuit identifier part of Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service. |
| TMN svcMSPwPeTaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.17 | TmnxPwGlobalIdOrZero | read-create | The value of svcMSPwPeTaiiGlobalId specifies the global identifier of Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service. |
| U32 svcMSPwPeTaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.18 | Unsigned32 | read-create | The value of svcMSPwPeTaiiPrefix specifies the prefix to the Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element as used by this multi-segment pseudo-wire provider-edge in this service. |
| TIM svcMSPwPeTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.106 | TimeStamp | read-only | The value of svcMSPwPeTblLastChanged indicates the sysUpTime at the time of the last modification of svcMSPwPeTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcMSPwPeTimeRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.107.1.24 | Unsigned32 | read-only | The value of svcMSPwPeTimeRemain indicates remaining time in the retry timer for this multi-segment pseudo-wire provider-edge in this service. |
| NTF svcMSPwRetryExpiredNotif | 1.3.6.1.4.1.6527.3.1.3.4.2.0.40 | [CAUSE] The svcMSPwRetryExpiredNotif notification is raised when retry-timer expires for this multi-segment pseudo-wire provider-edge (svcMSPwPeId) in the service. [EFFECT] There will be no more retries to establish connection from this svcMSPwPeId. [RECOVERY] svcMSPwPeId may need to be shutdown and may need to restart the retries. | ||
| NTF svcMSPwRtMisconfig | 1.3.6.1.4.1.6527.3.1.3.4.2.0.38 | [CAUSE] The svcMSPwRtMisconfig notification is raised when there is mis-configuration discovered between two signalling multi-segment pseudo-wires. The following misconfiguration would cause this notification: - Both multi-segment pseudo-wires are configured to be master [EFFECT] Communication between the multi-segment pseudo-wires will fail. [RECOVERY] Mis-configuration between the two multi-segment pseudo-wire needs to be corrected. | ||
| MST svcMstiInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.6.43 | MstiInstanceId | accessible-for-notify | The value of the object svcMstiInstanceId indicates the Multiple Spanning Tree Instance. |
| INT svcMtu | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.7 | INTEGER | read-create | The value of the object svcMtu specifies the largest frame size (in octets) that this service can handle. Setting svcMtu to a value of zero (0), causes the agent to recalculate the default MTU size. The default value of this object depends on the service type: 1514 octets for epipe, p3pipe and tls, 1508 for apipe and fpipe, and 1500 octets for vprn, ipipe and ies, 1514 octets for cpipe. |
| TLN svcName | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.29 | TLNamedItemOrEmpty | read-create | The value of the svcName specifies the name of the service. This value should be unique within the service domain. |
| svcNameEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.63.1 | not-accessible | Basic information about a specific service. | |
| TMN svcNameId | 1.3.6.1.4.1.6527.3.1.2.4.2.63.1.1 | TmnxServId | read-create | The value of the object svcNameId specifies the Service Identifier associated with this service. An 'inconsistentValue' error is returned if this object is set to default value when svcNameType is set to a non-default value or when this object is set to non-default value and svcNameType is set to default value. |
| TIM svcNameLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.63.1.3 | TimeStamp | read-only | The value of svcNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcNameRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.63.1.2 | RowStatus | read-create | This value of the object svcRowStatus specifies the status of this row. |
| svcNameTable | 1.3.6.1.4.1.6527.3.1.2.4.2.63 | not-accessible | A table that contains basic service information. Entries can be created manually or automatically by the system when svcName object is set for the service. | |
| TIM svcNameTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.62 | TimeStamp | read-only | The value of svcNameTableLastChanged indicates the sysUpTime at the time of the last modification of svcNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| SER svcNameType | 1.3.6.1.4.1.6527.3.1.2.4.2.63.1.4 | ServType | read-create | The value of the object svcNameType specifies the service type: e.g. epipe, tls, etc. An 'inconsistentValue' error is returned if this object is set to default value when svcNameId is set to a non-default value or when this object is set to non-default value and svcNameId is set to default value. |
| TMN svcNotifSapEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.6.45 | TmnxEncapVal | accessible-for-notify | The value of the label used to identify the SAP on the access port specified by sapPortId. |
| TMN svcNotifSapPortId | 1.3.6.1.4.1.6527.3.1.2.4.6.44 | TmnxPortID | accessible-for-notify | The ID of the access port where the SAP is defined. |
| I32 svcNumEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.1 | Integer32 | read-only | The current number of services configured on this node. |
| I32 svcNumMcStandbySaps | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.27 | Integer32 | read-only | The value of the object svcNumMcStandbySaps indicates the number of SAPs defined on this service on a port which is in multi-chassis standby mode. |
| I32 svcNumSaps | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.10 | Integer32 | read-only | The value of the object svcNumSaps indicates the number of SAPs defined on this service. |
| I32 svcNumSdps | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.11 | Integer32 | read-only | The value of the object svcNumSdps indicates the number of SDPs bound to this service. |
| TMN svcOperGrpCreationOrigin | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.6 | TmnxSvcOperGrpCreationOrigin | read-only | The value of svcOperGrpCreationOrigin indicates the protocol or mechanism which created this group. |
| svcOperGrpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1 | not-accessible | Each row specifies information about a specific Operational-Group. | |
| TMN svcOperGrpHoldDownTime | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.5 | TmnxOperGrpHoldDownTime | read-create | The value of svcOperGrpHoldDownTime specifies number of seconds to wait before notifying clients monitoring this group when its operational status transitions from up to down. |
| TMN svcOperGrpHoldDownTimeRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.9 | TmnxOperGrpHoldDownTime | read-only | The value of svcOperGrpHoldDownTimeRemain indicates the number of seconds remaining in the svcOperGrpHoldDownTime. |
| TMN svcOperGrpHoldUpTime | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.7 | TmnxOperGrpHoldUpTime | read-create | The value of svcOperGrpHoldUpTime specifies number of seconds to wait before notifying clients monitoring this group when its operational status transitions from down to up. |
| TMN svcOperGrpHoldUpTimeRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.8 | TmnxOperGrpHoldUpTime | read-only | The value of svcOperGrpHoldUpTimeRemain indicates the number of seconds remaining in the svcOperGrpHoldUpTime. |
| TIM svcOperGrpLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.3 | TimeStamp | read-only | The value of svcOperGrpLastChange indicates the timestamp of last change to this row in svcOperGrpTable. |
| TNA svcOperGrpName | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.1 | TNamedItem | not-accessible | The value of the object svcOperGrpName specifies the Operational-Group identifier. |
| G32 svcOperGrpNumMembers | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.10 | Gauge32 | read-only | The value of svcOperGrpNumMembers indicates the number of members as part of this operational-group. |
| G32 svcOperGrpNumMonitoring | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.11 | Gauge32 | read-only | The value of svcOperGrpNumMonitoring indicates the number of objects monitoring this operational-group. |
| SER svcOperGrpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.4 | ServiceOperStatus | read-only | The value of svcOperGrpOperStatus indicates the operational state of this group. |
| NTF svcOperGrpOperStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.39 | [CAUSE] The svcOperGrpOperStatusChanged notification is generated when there is a change in the value of svcOperGrpOperStatus. [EFFECT] Status of the one or more of the members of the operational group has changed. [RECOVERY] Operational status of the members of the operational-group will need to be investigated. | ||
| ROW svcOperGrpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.109.1.2 | RowStatus | read-create | This value of the object svcOperGrpRowStatus specifies the status of this row. |
| svcOperGrpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.109 | not-accessible | A table that contains Operational-Group information. | |
| TIM svcOperGrpTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.108 | TimeStamp | read-only | The value of svcOperGrpTblLastChanged indicates the sysUpTime at the time of the last modification of svcOperGrpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| SER svcOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.9 | ServiceOperStatus | read-only | The value of the object svcOperStatus indicates the operating state of this service. The requirements for a service to be operationally up depend on the service type: epipe, p3pipe, apipe, fpipe, ipipe and cpipe services are 'up' when the service is administratively up and either both SAP's or a SAP and a spoke SDP Bind are operationally up. tls services are 'up' when the service is administratively up and either at least two SAP's or spoke SDP Bind's, or one SAP or spoke SDP Bind and at least one mesh SDP Bind are operationally up. vprn and ies services are 'up' when the service is administratively up and at least one interface is operationally up. |
| MAC svcPbbSrcBVplsMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.57 | MacAddress | read-write | The value of svcPbbSrcBVplsMacAddr specifies the source Backbone MAC-Address to be used for Provider Backbone Bridging (PBB) packets. Value of default for this object indicates that chassis MAC address will be used for PBB packets. |
| svcPEDiscoveryPolicyEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1 | not-accessible | svcPEDiscoveryPolicyEntry is an entry (conceptual row) in the svcPEDiscoveryPolicyTable. Each entry represents the configuration of a PE Discovery Policy. Entries in this table can be created and deleted via SNMP SET operations to svcPEDiscoveryPolicyRowStatus. | |
| U32 svcPEDiscoveryPolicyInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.4 | Unsigned32 | read-create | The value of svcPEDiscoveryPolicyInterval specifies the polling interval for Radius PE discovery in minutes. |
| TNA svcPEDiscoveryPolicyName | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.1 | TNamedItem | not-accessible | The value of the object svcPEDiscoveryPolicyName specifies the RADIUS PE Discovery Policy name. |
| OCT svcPEDiscoveryPolicyPassword | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.3 | OCTET STRING | read-create | The value of svcPEDiscoveryPolicyPassword specifies the password that is used when contacting the RADIUS server for VPLS auto-discovery. GETs and GETNEXTs on this variable return an empty string. |
| ROW svcPEDiscoveryPolicyRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.2 | RowStatus | read-create | svcPEDiscoveryPolicyRowStatus controls the creation and deletion of rows in the table. To create a row in the svcPEDiscoveryPolicyTable, set svcPEDiscoveryPolicyRowStatus to 'createAndGo'. All objects will take on default values and the agent will change svcPEDiscoveryPolicyRowStatus to 'active'. To delete a row in the svcPEDiscoveryPolicyTable, set svcPEDiscoveryPolicyRowStatus to 'delete'. |
| svcPEDiscoveryPolicyTable | 1.3.6.1.4.1.6527.3.1.2.4.2.22 | not-accessible | The svcPEDiscoveryPolicyTable has an entry for each PE policy. | |
| U32 svcPEDiscoveryPolicyTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.22.1.5 | Unsigned32 | read-create | The value of svcPEDiscoveryPolicyTimeout specifies the number of seconds to wait before timing out a RADIUS server. |
| IP svcPEDiscPolServerAddress | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.4 | InetAddress | read-create | The value of svcPEDiscPolServerAddress is used to configure the IP address of the RADIUS server. A valid value for svcPEDiscPolServerAddress object must be specified at the time of creation of entry. |
| IPt svcPEDiscPolServerAddressType | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.3 | InetAddressType | read-create | The value of svcPEDiscPolServerAddressType is used to configure the address type of svcPEDiscPolServerAddress address. A valid value for svcPEDiscPolServerAddressType object must be specified at the time of creation of entry. |
| svcPEDiscPolServerEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1 | not-accessible | svcPEDiscPolServerEntry is an entry (conceptual row) in the svcPEDiscPolServerTable. Each entry represents the configuration for a RADIUS server. Entries in this table can be created and deleted via SNMP SET operations to svcPEDiscPolServerRowStatus. | |
| U32 svcPEDiscPolServerIndex | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.1 | Unsigned32 | not-accessible | The svcPEDiscPolServerIndex indicates the unique value which identifies a specific radius server. |
| SER svcPEDiscPolServerOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.6 | ServiceOperStatus | read-only | The svcPEDiscPolServerOperStatus indicates the current status of the RADIUS server. |
| U32 svcPEDiscPolServerPort | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.7 | Unsigned32 | read-create | The svcPEDiscPolServerPort is used to configure the UDP port number on which to contact the RADIUS server. |
| ROW svcPEDiscPolServerRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.2 | RowStatus | read-create | svcPEDiscPolServerRowStatus controls the creation and deletion of rows in the table. |
| OCT svcPEDiscPolServerSecret | 1.3.6.1.4.1.6527.3.1.2.4.2.23.1.5 | OCTET STRING | read-create | The svcPEDiscPolServerSecret is used to configure the secret key associated with the RADIUS server. A valid value for svcPEDiscPolServerSecret object must be specified at the time of creation of entry. The value of svcPEDiscPolServerSecret cannot be set to an empty string. GETs and GETNEXTs on this variable return an empty string. |
| svcPEDiscPolServerTable | 1.3.6.1.4.1.6527.3.1.2.4.2.23 | not-accessible | The svcPEDiscPolServerTable has an entry for each RADIUS server. The table can have up to a maximum of 5 entries. | |
| NTF svcPersistencyProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.24 | The svcPersistencyProblem notification is generated on persistency problems. | ||
| G32 svcPwRtBgpRoutes | 1.3.6.1.4.1.6527.3.1.2.4.2.113.7 | Gauge32 | read-only | The value of svcPwRtBgpRoutes indicates the number of BGP routes in the TIMETRA-VRTR-MIB::vRtrMsPwL2RtTable. |
| I32 svcPwRtBootTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.113.4 | Integer32 | read-write | The value of the object svcPwRtBootTimer specifies how long the system waits after the reboot before trying to establish multi-segment pseudo-wire provider-edge connections. |
| I32 svcPwRtBootTimerRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.113.11 | Integer32 | read-only | The value of svcPwRtBootTimerRemain indicates the number of seconds remaining in the svcPwRtBootTimer. |
| G32 svcPwRtHostRoutes | 1.3.6.1.4.1.6527.3.1.2.4.2.113.10 | Gauge32 | read-only | The value of svcPwRtHostRoutes indicates the number of host routes in the TIMETRA-VRTR-MIB::vRtrMsPwL2RtTable. |
| TMN svcPwRtLclPfxRD | 1.3.6.1.4.1.6527.3.1.2.4.2.115.1.1 | TmnxVPNRouteDistinguisher | not-accessible | The value of svcPwRtLclPfxRD specifies the route-disinguisher assoicated with this prefix. |
| U32 svcPwRtLclPfxRDCommunity | 1.3.6.1.4.1.6527.3.1.2.4.2.115.1.4 | Unsigned32 | read-create | The value of the object svcPwRtLclPfxRDCommunity specifies the BGP community associated with the route-distinguisher. |
| svcPwRtLclPfxRDEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.115.1 | not-accessible | An entry indicating pseudo-wire routing local prefix route- distinguisher information. | |
| TIM svcPwRtLclPfxRDLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.115.1.3 | TimeStamp | read-only | The value of svcPwRtLclPfxRDLastChange indicates the timestamp of last change to this row in svcPwRtLclPfxRDTable. |
| ROW svcPwRtLclPfxRDRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.115.1.2 | RowStatus | read-create | This value of the object svcPwRtLclPfxRDRowStatus specifies the status of this row. |
| svcPwRtLclPfxRDTable | 1.3.6.1.4.1.6527.3.1.2.4.2.115 | not-accessible | A table that contains pseudo-wire routing local prefix route- distingiusher information. | |
| TIM svcPwRtLclPfxRDTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.114 | TimeStamp | read-only | The value of svcPwRtLclPfxRDTblLastChanged indicates the sysUpTime at the time of the last modification of svcPwRtLclPfxRDTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcPwRtLclPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.99.1.2 | Unsigned32 | not-accessible | The value of the object svcPwRtLclPrefix specifies prefix value used by this pseudo-wire instance for redundancy. |
| svcPwRtLclPrefixEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.99.1 | not-accessible | An entry indicating pseudo-wire routing local prefix information. | |
| TMN svcPwRtLclPrefixGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.99.1.1 | TmnxPwGlobalId | not-accessible | The value of the object svcPwRtLclPrefixGlobalId specifies the pseudo-wire routing global identifier. |
| TIM svcPwRtLclPrefixLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.99.1.4 | TimeStamp | read-only | The value of svcPwRtLclPrefixLastChange indicates the timestamp of last change to this row in svcPwRtLclPrefixTable. |
| ROW svcPwRtLclPrefixRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.99.1.3 | RowStatus | read-create | This value of the object svcPwRtLclPrefixRowStatus specifies the status of this row. |
| svcPwRtLclPrefixTable | 1.3.6.1.4.1.6527.3.1.2.4.2.99 | not-accessible | A table that contains pseudo-wire routing local prefix information. | |
| TIM svcPwRtLclPrefixTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.98 | TimeStamp | read-only | The value of svcPwRtLclPrefixTblLastChanged indicates the sysUpTime at the time of the last modification of svcPwRtLclPrefixTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| G32 svcPwRtLocalRoutes | 1.3.6.1.4.1.6527.3.1.2.4.2.113.9 | Gauge32 | read-only | The value of svcPwRtLocalRoutes indicates the number of local routes in the TIMETRA-VRTR-MIB::vRtrMsPwL2RtTable. |
| SER svcPwRtPathAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.101.1.4 | ServiceAdminStatus | read-create | The value of svcPwRtPathAdminStatus specifies the administrative state of this path. |
| svcPwRtPathEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.101.1 | not-accessible | An entry indicating global pseudo-wire routing path information. | |
| IP svcPwRtPathHopAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.103.1.5 | InetAddress | read-create | The value of svcPwRtPathHopAddr specifies the address associated with this hop. |
| IPt svcPwRtPathHopAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.103.1.4 | InetAddressType | read-create | The value of svcPwRtPathHopAddrType specifies the address type of the address specified by svcPwRtPathHopAddr. |
| svcPwRtPathHopEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.103.1 | not-accessible | An entry indicating specific pseudo-wire routing path hop information. | |
| TMN svcPwRtPathHopIndex | 1.3.6.1.4.1.6527.3.1.2.4.2.103.1.1 | TmnxPwPathHopId | not-accessible | The value of the object svcPwRtPathHopIndex specifies the hop index for the path in pseudo-wire routing global instance. |
| TIM svcPwRtPathHopLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.103.1.3 | TimeStamp | read-only | The value of svcPwRtPathHopLastChange indicates the timestamp of last change to this row in svcPwRtPathHopTable. |
| ROW svcPwRtPathHopRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.103.1.2 | RowStatus | read-create | This value of the object svcPwRtPathHopRowStatus specifies the status of this row. |
| svcPwRtPathHopTable | 1.3.6.1.4.1.6527.3.1.2.4.2.103 | not-accessible | A table that contains hop information per path in the pseudo-wire routing instances. | |
| TIM svcPwRtPathHopTblLastChgd | 1.3.6.1.4.1.6527.3.1.2.4.2.102 | TimeStamp | read-only | The value of svcPwRtPathHopTblLastChgd indicates the sysUpTime at the time of the last modification of svcPwRtPathHopTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TIM svcPwRtPathLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.101.1.3 | TimeStamp | read-only | The value of svcPwRtPathLastChange indicates the timestamp of last change to this row in svcPwRtPathTable. |
| TNA svcPwRtPathName | 1.3.6.1.4.1.6527.3.1.2.4.2.101.1.1 | TNamedItem | not-accessible | The value of the object svcPwRtPathName specifies the path name in pseudo-wire routing global instance. |
| ROW svcPwRtPathRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.101.1.2 | RowStatus | read-create | This value of the object svcPwRtPathRowStatus specifies the status of this row. |
| svcPwRtPathTable | 1.3.6.1.4.1.6527.3.1.2.4.2.101 | not-accessible | A table that contains pseudo-wire routing global path information. | |
| TIM svcPwRtPathTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.100 | TimeStamp | read-only | The value of svcPwRtPathTblLastChanged indicates the sysUpTime at the time of the last modification of svcPwRtPathTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcPwRtRetryCount | 1.3.6.1.4.1.6527.3.1.2.4.2.113.6 | Unsigned32 | read-write | The value of svcPwRtRetryCount specifies the retry count value to be used by this multi-segment pseudo-wire provider-edge in this service. |
| U32 svcPwRtRetryTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.113.5 | Unsigned32 | read-write | The value of svcPwRtRetryTimer specifies the retry timer value to be used by this multi-segment pseudo-wire provider-edge in this service. |
| TMN svcPwRtSpeAddrGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.113.2 | TmnxPwGlobalIdOrZero | read-write | The value of the object svcPwRtSpeAddrGlobalId specifies the pseudo- wire routing global identifier of the switch-point node. An 'inconsistentValue' error is returned if svcPwRtSpeAddrGlobalId is set to default when svcPwRtSpeAddrPrefix is set to non-default value or svcPwRtSpeAddrGlobalId is set to non-default when svcPwRtSpeAddrPrefix is set to default value. |
| U32 svcPwRtSpeAddrPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.113.3 | Unsigned32 | read-write | The value of the object svcPwRtSpeAddrPrefix specifies the pseudo-wire routing prefix of the switch-point node. An 'inconsistentValue' error is returned if svcPwRtSpeAddrGlobalId is set to default when svcPwRtSpeAddrPrefix is set to non-default value or svcPwRtSpeAddrGlobalId is set to non-default when svcPwRtSpeAddrPrefix is set to default value. |
| G32 svcPwRtStaticRoutes | 1.3.6.1.4.1.6527.3.1.2.4.2.113.8 | Gauge32 | read-only | The value of svcPwRtStaticRoutes indicates the number of static routes in the TIMETRA-VRTR-MIB::vRtrMsPwL2RtTable. |
| IP svcPwRtStaticRtDstAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1.4 | InetAddress | not-accessible | The value of svcPwRtStaticRtDstAddr specifies the destination address of this static-route entry. |
| IPt svcPwRtStaticRtDstAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1.3 | InetAddressType | not-accessible | The value of svcPwRtStaticRtDstAddrType specifies the address type of the address specified by svcPwRtStaticRtDstAddr. |
| TMN svcPwRtStaticRtDstGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1.1 | TmnxPwGlobalIdOrZero | not-accessible | The value of the object svcPwRtStaticRtDstGlobalId specifies the pseudo-wire global routing index of the destination. |
| U32 svcPwRtStaticRtDstPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1.2 | Unsigned32 | not-accessible | The value of the object svcPwRtStaticRtDstPrefix specifies the prefix of the global routing index of the destination. |
| svcPwRtStaticRtEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1 | not-accessible | An entry indicating specific static-route for the pseudo-wire routing instance. | |
| TIM svcPwRtStaticRtLastChange | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1.6 | TimeStamp | read-only | The value of svcPwRtStaticRtLastChange indicates the timestamp of last change to this row in svcPwRtStaticRtTable. |
| ROW svcPwRtStaticRtRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.105.1.5 | RowStatus | read-create | This value of the object svcPwRtStaticRtRowStatus specifies the status of this row. |
| svcPwRtStaticRtTable | 1.3.6.1.4.1.6527.3.1.2.4.2.105 | not-accessible | A table that contains static-route information for the pseudo-wire routing instances. | |
| TIM svcPwRtStaticRtTblLastChgd | 1.3.6.1.4.1.6527.3.1.2.4.2.104 | TimeStamp | read-only | The value of svcPwRtStaticRtTblLastChgd indicates the sysUpTime at the time of the last modification of svcPwRtStaticRtTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| svcPwSpeSaiiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1 | not-accessible | An entry that contains pseudo-wire switch-point node information by Source Attachment Individual Identifier (SAII). | |
| SDP svcPwSpeSaiiOperSdpBind1 | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1.5 | SdpBindId | read-only | The value of svcPwSpeSaiiOperSdpBind1 indicates the first operational SDP-bind on this switch-point node. |
| SDP svcPwSpeSaiiOperSdpBind2 | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1.6 | SdpBindId | read-only | The value of svcPwSpeSaiiOperSdpBind2 indicates the other operational SDP-bind on this switch-point node. |
| TMN svcPwSpeSaiiSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1.4 | TmnxServId | read-only | The value of svcPwSpeSaiiSvcId indicates the Service identifier on this switch-point node. |
| svcPwSpeSaiiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.116 | not-accessible | A table that contains pseudo-wire switch-point node information by Source Attachment Individual Identifier (SAII). | |
| U32 svcPwSpeSaiiTaiiAcId | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1.3 | Unsigned32 | read-only | The value of svcPwSpeSaiiTaiiAcId indicates the attachment circuit identifier part of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element on switch-point node. |
| TMN svcPwSpeSaiiTaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1.1 | TmnxPwGlobalIdOrZero | read-only | The value of svcPwSpeSaiiTaiiGlobalId indicates the global identifier of Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element on switch-point node. |
| U32 svcPwSpeSaiiTaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.116.1.2 | Unsigned32 | read-only | The value of svcPwSpeSaiiTaiiPrefix indicates the prefix to the Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element on switch-point node. |
| svcPwSpeTaiiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1 | not-accessible | An entry that contains pseudo-wire switch-point node information by Target Attachment Individual Identifier (TAII). | |
| SDP svcPwSpeTaiiOperSdpBind1 | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1.5 | SdpBindId | read-only | The value of svcPwSpeTaiiOperSdpBind1 indicates the first operational SDP-bind on this switch-point node. |
| SDP svcPwSpeTaiiOperSdpBind2 | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1.6 | SdpBindId | read-only | The value of svcPwSpeTaiiOperSdpBind2 indicates the other operational SDP-bind on this switch-point node. |
| U32 svcPwSpeTaiiSaiiAcId | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1.3 | Unsigned32 | read-only | The value of svcPwSpeTaiiSaiiAcId indicates the attachment circuit identifier part of Target Attachment Individual Identifier (TAII) portion of the Generalized Id FEC element on switch-point node. |
| TMN svcPwSpeTaiiSaiiGlobalId | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1.1 | TmnxPwGlobalIdOrZero | read-only | The value of svcPwSpeTaiiSaiiGlobalId indicates the global identifier of Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element on switch-point node. |
| U32 svcPwSpeTaiiSaiiPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1.2 | Unsigned32 | read-only | The value of svcPwSpeTaiiSaiiPrefix indicates the prefix to the Source Attachment Individual Identifier (SAII) portion of the Generalized Id FEC element on switch-point node. |
| TMN svcPwSpeTaiiSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.117.1.4 | TmnxServId | read-only | The value of svcPwSpeTaiiSvcId indicates the Service identifier on this switch-point node. |
| svcPwSpeTaiiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.117 | not-accessible | A table that contains pseudo-wire switch-point node information by Target Attachment Individual Identifier (TAII). | |
| T/F svcRadiusDiscovery | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.20 | TruthValue | read-create | The value of the object svcRadiusDiscovery specifies whether RADIUS auto-discovery is enabled on this service. |
| SER svcRadiusDiscoveryShutdown | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.25 | ServiceAdminStatus | read-create | The value of svcRadiusDiscoveryShutdown specifies the desired administrative state for the RADIUS auto-discovery server. When the server is 'down' the operational state of the server is disabled. By default, state of the RADIUS auto-discovery server is 'down'. |
| TNA svcRadiusPEDiscPolicy | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.24 | TNamedItemOrEmpty | read-create | The value of the object svcRadiusPEDiscPolicy specifies the RADIUS PE Discovery Policy name. |
| STR svcRadiusUserName | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.22 | DisplayString | read-create | The value of the object svcRadiusUserName specifies the RADIUS user name. svcRadiusUserNameType specifies the type of the username and has to be set along with svcRadiusUserName when svcRadiusUserName can either be a vpn-id or a router-distinguisher. |
| INT svcRadiusUserNameType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.21 | INTEGER | read-create | The value of the object svcRadiusUserNameType specifies whether RADIUS user name is vpn-id or router-distinguisher. By default, the value of this object is 'none'. svcRadiusUserNameType and svcRadiusUserName, which indicates the RADIUS username, must be set together in the same SNMP request PDU if svcRadiusUserNameType is vpn-id or router-distinguisher or else the set request will fail with an inconsistentValue error. |
| NTF svcRestoreHostProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.33 | The svcRestoreHostProblem notification is generated when an an error is detected while processing a host persistency record. From release 9.0 of SROS onwards, the notification TIMETRA-SYSTEM-MIB::persistenceRestoreProblem is used instead. | ||
| ROW svcRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.2 | RowStatus | read-create | This value of the object svcRowStatus specifies the status of this row. To delete an entry from this table, the corresponding service must be administratively down, have no SAP's defined on it, and have no SDP bindings. For svcType 'vprn', the service can be associated with a routing instance by specifying svcVRouterId during the creation of the service. The value of the object svcVplsType specifies the VPLS service type. The value of this object must be specified when the row is created and cannot be changed while the svcRowStatus is 'active'. |
| TMN svcSpbIfEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.6 | TmnxEncapVal | read-only | The value of svcSpbIfEncapValue indicates the encap-value of the SAP for this interface entry. This object is valid only when svcSpbIfLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| svcSpbIfEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1 | not-accessible | The svcSpbIfEntry contains a specific SPB interface related information. | |
| NUM svcSpbIfIndex | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.1 | InterfaceIndex | not-accessible | The value of the object svcSpbIfIndex indicates the interface index. |
| I32 svcSpbIfIsisInstance | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.10 | Integer32 | read-only | The value of svcSpbIfIsisInstance indicates the ISIS-MIB::isisSysInstance used with this Shortest Path Bridging interface. |
| TMN svcSpbIfLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.4 | TmnxSpbFdbLocale | read-only | The value of the object svcSpbIfLocale indicates locality of the this interface entry. |
| TMN svcSpbIfPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.5 | TmnxPortID | read-only | The value of svcSpbIfPortId indicates the port-id of the SAP for this interface entry. This object is valid only when svcSpbIfLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| SDP svcSpbIfSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.7 | SdpId | read-only | The value of svcSpbIfSdpId indicates the sdp identifier of the SDP binding of the SDP for this interface entry. This object is valid only when svcSpbIfLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN svcSpbIfSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.9 | TmnxServId | read-only | The value of svcSpbIfSvcId indicates the service identifier of this Shortest Path Bridging interface. |
| svcSpbIfTable | 1.3.6.1.4.1.6527.3.1.2.4.2.135 | not-accessible | The svcSpbIfTable contains Shortest Path Bridging (SPB) interface information. | |
| U32 svcSpbIfVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.135.1.8 | Unsigned32 | read-only | The value of svcSpbIfPortId indicates the virtual-circuit identifier (vc-id) of the SDP binding of the SDP for this interface entry. This object is valid only when svcSpbIfLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| NTF svcStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.3 | The svcStatusChanged notification is generated when there is a change in the administrative or operating status of a service. | ||
| T/F svcTlsAllowIpIfBinding | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.86 | TruthValue | read-write | The value of the object svcTlsAllowIpIfBinding indicates, whether to allow IP interface binding on this service. |
| T/F svcTlsBackboneForceQTagFwd | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.10 | TruthValue | read-write | The value of svcTlsBackboneForceQTagFwd specifies whether to enable addition of an IEEE 802.1q tag after the Customer MAC address when the PBB header is built, as it egresses related 'b-vpls' service. An 'inconsistentValue' error is returned when the value of this object is set to the non-default value and svcVplsType of this service is not set to 'i-vpls'. |
| svcTlsBackboneInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1 | not-accessible | Each row entry contains objects that allows the modification of the Provider Backbone Bridging feature for a specific TLS service | |
| svcTlsBackboneInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.27 | not-accessible | The svcTlsBackboneInfoTable augments the svcTlsInfoTable. The table allows the operator to modify attributes of the Provider Backbone Bridging feature. | |
| T/F svcTlsBackboneLDPMacFlush | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.6 | TruthValue | read-write | The value of svcTlsBackboneLDPMacFlush specifies whether 'LDP MAC withdraw all from me' message received in the 'iVpls' domain should attempt to generate a new 'LDP MAC withdraw all from me' message in the 'bVpls' domain. Generation of the 'LDP MAC withdraw all from me' message is still constrained by the svcTlsMacFlushOnFail value in the 'bVpls'. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. |
| T/F svcTlsBackboneLDPMacFlushNotMine | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.8 | TruthValue | read-write | The value of svcTlsBackboneLDPMacFlush specifies whether 'LDP MAC withdraw' message received in the 'iVpls' domain should attempt to generate a new 'LDP MAC withdraw' message in the 'bVpls' domain. Generation of the 'LDP MAC withdraw' message is still constrained by the svcTlsMacFlushOnFail value in the 'bVpls'. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. |
| MAC svcTlsBackboneOperSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.4 | MacAddress | read-only | The value of svcTlsBackboneOperSrcMac indicates the operational Backbone Source MAC-Address for Provider Backbone Bridging packets. |
| SVC svcTlsBackboneOperVplsSvcISID | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.5 | SvcISID | read-only | The value of svcTlsBackboneOperVplsSvcISID indicates operational value of service instance identifier used for this service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. |
| MAC svcTlsBackboneSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.1 | MacAddress | read-write | The value of svcTlsBackboneSrcMac specifies the Backbone Source MAC-Address for Provider Backbone Bridging packets. If not provisioned, it defaults to the loopback chassis MAC-Address. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'bVpls'. |
| T/F svcTlsBackboneUseSapBMac | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.9 | TruthValue | read-write | The value of svcTlsBackboneUseSapBMac specifies whether to enable dual-homing to use source Backbone MAC-Address allocated for multi-homed SAPs (assigned to an MC-LAG) in the related service with svcVplsType set to 'i-vpls' or with svcType set to 'epipe'. |
| TMN svcTlsBackboneVplsStp | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.7 | TmnxEnabledDisabled | read-write | The value of svcTlsBackboneVplsStp specifies whether STP is enabled on the Backbone VPLS specified by svcTlsBackboneVplsSvcId. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls' or if an attempt is made to set this object to enable when the value of svcTlsBackboneVplsSvcId is set to the default. The value of this object is set to disable when the value of svcTlsBackboneVplsSvcId is set to default. |
| TMN svcTlsBackboneVplsSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.2 | TmnxServId | read-write | The value of svcTlsBackboneVplsSvcId specifies the Backbone-VPLS service associated with this service. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. Setting the value of this object to its default value will also set the value of svcTlsBackboneVplsStp to its default value. |
| SVC svcTlsBackboneVplsSvcISID | 1.3.6.1.4.1.6527.3.1.2.4.2.27.1.3 | SvcISID | read-write | The value of the object svcTlsBackboneVplsSvcISID specifies a 24 bit (0..16777215) service instance identifier for this service. As part of the Provider Backbone Bridging frames, it is used at the destination PE as a demultiplexor field. The default value of -1 is used to indicate the value of this object is un-specified. This object must be set along with svcTlsBackboneVplsSvcId. An inconsistentValue error is returned if an attempt is made to set this object when the value of svcVplsType is not 'iVpls'. |
| TMN svcTlsBgpADAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.18 | TmnxEnabledDisabled | read-create | The value of svcTlsBgpADAdminStatus specifies the desired administrative state for BGP Auto-Discovery in this VPLS service. |
| svcTlsBgpADEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1 | not-accessible | A BGP Auto-Discovery entry in the svcTlsBgpADTable. | |
| TNA svcTlsBgpADExportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.6 | TNamedItemOrEmpty | read-create | The value of svcTlsBgpADExportRteTarget specifies the extended community name for the default export policy to use for BGP Auto-Discovery in this VPLS service. This object cannot be set to a non-empty if svcTlsBgpADExportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. This object is obsoleted and replaced with svcTlsBgpExportRteTarget object in 8.0 release. |
| TNA svcTlsBgpADImportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.12 | TNamedItemOrEmpty | read-create | The value of svcTlsBgpADImportRteTarget specifies the extended community name for the default import policy to use for BGP Auto-Discovery in this VPLS service. This object cannot be set to a non-empty if svcTlsBgpADImportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. This object is obsoleted and replaced with svcTlsBgpImportRteTarget object in 8.0 release. |
| TIM svcTlsBgpADLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.2 | TimeStamp | read-only | The value of svcTlsBgpADLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcTlsBgpADRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.1 | RowStatus | read-create | The value of svcTlsBgpADRowStatus is used for the creation and deletion of BGP Auto-Discovery context in a VPLS service. |
| svcTlsBgpADTable | 1.3.6.1.4.1.6527.3.1.2.4.2.31 | not-accessible | svcTlsBgpADTable contains entries for BGP Auto-Discovery in a VPLS service context. | |
| TIM svcTlsBgpADTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.30 | TimeStamp | read-only | The value of svcTlsBgpADTableLastChanged indicates the sysUpTime at the time of the last modification of svcTlsBgpADTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcTlsBgpADVplsId | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.3 | TmnxVPNRouteDistinguisher | read-create | The value of svcTlsBgpADVplsId specifies the globally unique VPLS-id for BGP Auto-Discovery in this VPLS service. The value of svcTlsBgpADAdminStatus cannot be 'enabled' until a VPLS-id has been assigned which is not all zeros. |
| TPO svcTlsBgpADVsiExportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.7 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy1 specifies the name of the first VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiExportPolicy1 object in 8.0 release. |
| TPO svcTlsBgpADVsiExportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.8 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy2 specifies the name of the second VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiExportPolicy2 object in 8.0 release. |
| TPO svcTlsBgpADVsiExportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.9 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy3 specifies the name of the third VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiExportPolicy3 object in 8.0 release. |
| TPO svcTlsBgpADVsiExportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.10 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy4 specifies the name of the forth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiExportPolicy4 object in 8.0 release. |
| TPO svcTlsBgpADVsiExportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.11 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiExportPolicy5 specifies the name of the fifth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiExportPolicy1 through svcTlsBgpADVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiExportPolicy5 object in 8.0 release. |
| TPO svcTlsBgpADVsiImportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.13 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy1 specifies the name of the first VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiImportPolicy1 object in 8.0 release. |
| TPO svcTlsBgpADVsiImportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.14 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy2 specifies the name of the second VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiImportPolicy2 object in 8.0 release. |
| TPO svcTlsBgpADVsiImportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.15 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy3 specifies the name of the third VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiImportPolicy3 object in 8.0 release. |
| TPO svcTlsBgpADVsiImportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.16 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy4 specifies the name of the forth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiImportPolicy4 object in 8.0 release. |
| TPO svcTlsBgpADVsiImportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.17 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpADVsiImportPolicy5 specifies the name of the fifth VSI export policy to be used for BGP Auto-Discovery in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpADVsiImportPolicy1 through svcTlsBgpADVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object is obsoleted and replaced with svcTlsBgpVsiImportPolicy5 object in 8.0 release. |
| U32 svcTlsBgpADVsiPrefix | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.4 | Unsigned32 | read-create | The value of svcTlsBgpADVsiPrefix specifies the low-order 4 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP Auto-Discovery in this VPLS service. If the value of svcTlsBgpADVsiPrefix is 0, the system IP address will be used. |
| TMN svcTlsBgpADVsiRD | 1.3.6.1.4.1.6527.3.1.2.4.2.31.1.5 | TmnxVPNRouteDistinguisher | read-create | The value of svcTlsBgpADVsiRD specifies the high-order 6 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP Auto-Discovery in this VPLS service. If the value of svcTlsBgpADVsiRD is 0x0000000000000000, the lower 6 bytes of the VPLS-id, as specified by svcTlsBgpADVplsId, will be used. This object is obsoleted and replaced with svcTlsBgpVsiRD object in 8.0 release. |
| svcTlsBgpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1 | not-accessible | A BGP entry in the svcTlsBgpTable. | |
| TNA svcTlsBgpExportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.3 | TNamedItemOrEmpty | read-create | The value of svcTlsBgpExportRteTarget specifies the extended community name for the default export policy to use for BGP in this VPLS service. This object cannot be set to a non-empty if svcTlsBgpExportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. |
| TNA svcTlsBgpImportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.9 | TNamedItemOrEmpty | read-create | The value of svcTlsBgpImportRteTarget specifies the extended community name for the default import policy to use for BGP in this VPLS service. This object cannot be set to a non-empty if svcTlsBgpImportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. |
| TIM svcTlsBgpLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.1 | TimeStamp | read-only | The value of svcTlsBgpLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcTlsBgpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.15 | RowStatus | read-create | The value of svcTlsBgpRowStatus is used for the creation and deletion of rows in this table. |
| svcTlsBgpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.81 | not-accessible | svcTlsBgpTable contains entries for BGP in a VPLS service context. | |
| TIM svcTlsBgpTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.80 | TimeStamp | read-only | The value of svcTlsBgpTableLastChanged indicates the sysUpTime at the time of the last modification of svcTlsBgpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TPO svcTlsBgpVsiExportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.4 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiExportPolicy1 specifies the name of the first VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiExportPolicy1 through svcTlsBgpVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiExportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.5 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiExportPolicy2 specifies the name of the second VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiExportPolicy1 through svcTlsBgpVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiExportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.6 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiExportPolicy3 specifies the name of the third VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiExportPolicy1 through svcTlsBgpVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiExportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.7 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiExportPolicy4 specifies the name of the forth VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiExportPolicy1 through svcTlsBgpVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiExportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.8 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiExportPolicy5 specifies the name of the fifth VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiExportPolicy1 through svcTlsBgpVsiExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiImportPolicy1 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.10 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiImportPolicy1 specifies the name of the first VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiImportPolicy1 through svcTlsBgpVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiImportPolicy2 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.11 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiImportPolicy2 specifies the name of the second VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiImportPolicy1 through svcTlsBgpVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiImportPolicy3 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.12 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiImportPolicy3 specifies the name of the third VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiImportPolicy1 through svcTlsBgpVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiImportPolicy4 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.13 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiImportPolicy4 specifies the name of the forth VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiImportPolicy1 through svcTlsBgpVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TPO svcTlsBgpVsiImportPolicy5 | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.14 | TPolicyStatementNameOrEmpty | read-create | The value of svcTlsBgpVsiImportPolicy5 specifies the name of the fifth VSI export policy to be used for BGP in this VPLS service. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, svcTlsBgpVsiImportPolicy1 through svcTlsBgpVsiImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. |
| TMN svcTlsBgpVsiRD | 1.3.6.1.4.1.6527.3.1.2.4.2.81.1.2 | TmnxVPNRouteDistinguisher | read-create | The value of svcTlsBgpVsiRD specifies the high-order 6 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP in this VPLS service. If the value of svcTlsBgpVsiRD is 0x0000000000000000, the lower 6 bytes of the VPLS-id, as specified by svcTlsBgpADVplsId, will be used. |
| TMN svcTlsCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.37 | TmnxCustId | read-only | The vakue of the object svcTlsCustId indicates the Customer ID of the associated TLS service. |
| NTF svcTlsDHCPLseStatePopulateErr | 1.3.6.1.4.1.6527.3.1.3.4.2.0.13 | The svcTlsDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded. | ||
| NTF svcTlsDHCPLseStRestoreProblem | 1.3.6.1.4.1.6527.3.1.3.4.2.0.12 | The svcTlsDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record. | ||
| TMN svcTlsDiscardUnknownDest | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.2 | TmnxEnabledDisabled | read-write | The value of the object svcTlsDiscardUnknownDest specifies whether frames received with an unknown destination MAC are discarded in this TLS. |
| svcTlsEndPointV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.134 | The group of objects supporting management of Services End-point capabilities on Alcatel-Lucent SROS series systems in 7.0 release. | ||
| svcTlsExtEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1 | not-accessible | svcTlsExtEntry extends svcTlsInfoEntry. | |
| U32 svcTlsExtMacReNotifInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.17 | Unsigned32 | read-write | The value of svcTlsExtMacReNotifInterval specifies time-interval between subsequent burst of MAC notification messages. The default value indicates that the re-notification is disabled. |
| TMN svcTlsExtMmrpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.10 | TmnxEnabledDisabled | read-write | The value of the object svcTlsExtMmrpAdminStatus specifies whether the Multiple MAC Registration Protocol (MMRP) is enabled in this TLS. Default value of this object is set to 'enabled' when svcVplsType of this service is set to 'bVpls' otherwise this is set to 'disabled'. |
| U32 svcTlsExtMmrpDeclaredAttrCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.13 | Unsigned32 | read-only | The value of the object svcTlsExtMmrpDeclaredAttrCnt indicates the number of MMRP attributes currently associated to the TLS by being declared. |
| T/F svcTlsExtMmrpEndStationOnly | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.16 | TruthValue | read-write | The value of the object svcTlsExtMmrpEndStationOnly specifies whether all SAP/SDP in this service are MMRP end-stations only. |
| U32 svcTlsExtMmrpFailedRegCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.14 | Unsigned32 | read-only | The value of the object svcTlsExtMvrpFailedRegCnt indicates number of failed MMRP attribute registrations in this TLS. |
| INT svcTlsExtMmrpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.11 | INTEGER | read-only | The value of the object svcTlsExtMmrpOperStatus indicates the operational status of Multiple MAC Registration Protocol (MMRP) in this TLS. |
| U32 svcTlsExtMmrpRegAttrCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.12 | Unsigned32 | read-only | The value of the object svcTlsExtMmrpRegAttrCnt indicates the number of MMRP attributes currently associated to the TLS by being registered. |
| TMN svcTlsExtMvrpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.8 | TmnxEnabledDisabled | read-write | The value of the object svcTlsExtMvrpAdminStatus specifies whether the Multiple VLAN Registration Protocol (MVRP) is enabled in this TLS. An 'inconsitentValue' error is returned if this object is set to non-default value when svcMgmtVpls of the service is not set to 'true'. |
| U32 svcTlsExtMvrpAttributeCount | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.15 | Unsigned32 | read-only | The value of the object svcTlsExtMvrpAttributeCount indicates the number of MVRP attributes currently associated to the TLS by either being registered or declared. |
| I32 svcTlsExtMvrpAttrTblHighWM | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.5 | Integer32 | read-write | The value of the object svcTlsExtMvrpAttrTblHighWM specifies the utilization of the MVRP attribute table of this TLS service at which a table full alarm will be raised by the agent. An 'inconsitentValue' error is returned if this object is set to non-default value when svcMgmtVpls of the service is not set to 'true'. |
| I32 svcTlsExtMvrpAttrTblLowWM | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.6 | Integer32 | read-write | The value of the object svcTlsExtMvrpAttrTblLowWM specifies utilization of the MVRP attribute table of this TLS service at which a table full alarm will be cleared by the agent. An 'inconsitentValue' error is returned if this object is set to non-default value when svcMgmtVpls of the service is not set to 'true'. |
| U32 svcTlsExtMvrpDeclaredAttrCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.3 | Unsigned32 | read-only | The value of the object svcTlsExtMvrpDeclaredAttrCnt indicates the number of MVRP attributes currently associated to the TLS by being declared. |
| U32 svcTlsExtMvrpFailedRegCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.4 | Unsigned32 | read-only | The value of the object svcTlsExtMvrpFailedRegCnt indicates number of failed MVRP attribute registrations in this TLS. |
| U32 svcTlsExtMvrpHoldTime | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.7 | Unsigned32 | read-write | The value of the object svcTlsExtMvrpHoldTime specifies the amount of time in minutes in reporting to MVRP that the last provisioned SAP in VPLS is down. A value of '0' disables tracking of the operational status for the last active SAP in the VPLS. An 'inconsitentValue' error is returned if this object is set to non-default value when svcMgmtVpls of the service is not set to 'true'. |
| U32 svcTlsExtMvrpMaxAttributes | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.1 | Unsigned32 | read-write | The value of the object svcTlsExtMvrpMaxAttributes indicates maximum number of MVRP attributes supported in this TLS. An 'inconsitentValue' error is returned if this object is set to non-default value when svcMgmtVpls of the service is not set to 'true'. |
| INT svcTlsExtMvrpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.9 | INTEGER | read-only | The value of the object svcTlsExtMvrpOperStatus indicates the operational status of Multiple VLAN Registration Protocol (MVRP) in this TLS. |
| U32 svcTlsExtMvrpRegAttrCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.2 | Unsigned32 | read-only | The value of the object svcTlsExtMvrpRegAttrCnt indicates the number of MVRP attributes currently associated to the TLS by being registered. |
| TMN svcTlsExtSpbmCtrlVpls | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.18 | TmnxServId | read-write | The value of the object svcTlsExtSpbmCtrlVpls specifies the controlling Shortest Path Bridging (SPB) VPLS for this user SPB VPLS. An 'inconsistentValue' error is returned if svcTlsExtSpbmCtrlVpls is set to default and svcTlsExtSpbmFid is set to its non-default value or when svcTlsExtSpbmCtrlVpls is set to non-default and svcTlsExtSpbmFid is set to its default value. |
| TMN svcTlsExtSpbmFid | 1.3.6.1.4.1.6527.3.1.2.4.2.97.1.19 | TmnxSpbFidOrZero | read-write | The value of the object svcTlsExtSpbmFid specifies the forwarding database identifier used by the user SPB VPLS. An 'inconsistentValue' error is returned if svcTlsExtSpbmCtrlVpls is set to default and svcTlsExtSpbmFid is set to its non-default value or when svcTlsExtSpbmCtrlVpls is set to non-default and svcTlsExtSpbmFid is set to its default value. |
| svcTlsExtTable | 1.3.6.1.4.1.6527.3.1.2.4.2.97 | not-accessible | A table that extends svcTlsInfoTable. | |
| I32 svcTlsFdbLocalAgeTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.6 | Integer32 | read-write | The value of the object svcTlsFdbLocalAgeTime specifies the number of seconds used to age out TLS FDB entries learned on local SAPs. |
| I32 svcTlsFdbNumDhcpEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.60 | Integer32 | read-only | The value of the object svcTlsFdbNumDhcpEntries indicates the current number of dhcp-learned entries in the FDB of this service. |
| I32 svcTlsFdbNumEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.4 | Integer32 | read-only | The value of the object svcTlsFdbNumEntries indicates the current number of entries in the FDB of this service. |
| I32 svcTlsFdbNumHostEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.61 | Integer32 | read-only | The value of the object svcTlsFdbNumHostEntries indicates the current number of host-learned entries in the FDB of this service. |
| I32 svcTlsFdbNumLearnedEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.58 | Integer32 | read-only | The value of the object svcTlsFdbNumLearnedEntries indicates the current number of learned entries in the FDB of this service. |
| I32 svcTlsFdbNumOamEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.59 | Integer32 | read-only | The value of the object svcTlsFdbNumOamEntries indicates the current number of OAM entries in the FDB of this service. |
| I32 svcTlsFdbNumStaticEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.5 | Integer32 | read-only | The value of the object svcTlsFdbNumStaticEntries indicates the current number of static entries in the FDB of this service. |
| I32 svcTlsFdbRemoteAgeTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.7 | Integer32 | read-write | The value of the object svcTlsFdbRemoteAgeTime specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs. |
| NTF svcTlsFdbTableFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.5 | The svcTlsFdbTableFullAlarmCleared notification is generated when the utilization of the FDB table drops to the value specified by svcTlsFdbTableFullLowWatermark. | ||
| NTF svcTlsFdbTableFullAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.4 | The svcTlsFdbTableFullAlarmRaised notification is generated when the utilization of the FDB table increases to reach the value specified by svcTlsFdbTableFullHighWatermark. | ||
| I32 svcTlsFdbTableFullHighWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.34 | Integer32 | read-write | The value of the object svcTlsFdbTableFullHighWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsFdbTableFullLowWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.35 | Integer32 | read-write | The value of the object svcTlsFdbTableFullLowWatermark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be cleared by the agent. |
| I32 svcTlsFdbTableSize | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.3 | Integer32 | read-write | The value of the object svcTlsFdbTableSize specifies the maximum number of learned and static entries allowed in the FDB of this service. The maximum value of svcTlsFdbTableSize is '511999', when the the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'd'. The maximum value of svcTlsFdbTableSize is '196607', when the the value of TIMETRA-CHASSIS-MIB::tmnxChassisOperMode is 'c'. In other cases, the maximum value of svcTlsFdbTableSize is '131071'. |
| SER svcTlsGroupAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.4 | ServiceAdminStatus | read-create | The value of svcTlsGroupAdminStatus specifies the desired state of this service-range. |
| TMN svcTlsGroupEnd | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.6 | TmnxServId | read-create | The value of the object svcTlsGroupEnd specifies the end of the service identifier range. An 'inconsistentValue' error is returned when the value of svcTlsGroupStart is set to larger than the value of svcTlsGroupEnd. An 'inconsistentValue' error is also returned when the value of svcTlsGroupEnd is set to non-default value and svcTlsGroupStart is set to the default value. |
| svcTlsGroupEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1 | not-accessible | TLS service range specific information for this service. | |
| TMN svcTlsGroupId | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.1 | TmnxTlsGroupId | not-accessible | The value of the object svcTlsGroupId specifies the Service range identifier under this service. |
| TIM svcTlsGroupLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.3 | TimeStamp | read-only | The value of svcTlsGroupLastChanged indicates the timestamp of last change to this row in svcTlsGroupTable. |
| STR svcTlsGroupLastError | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.12 | DisplayString | read-only | The value of the object svcTlsGroupLastError indicates the last error encountered trying to instantiate services for this group. |
| T/F svcTlsGroupMvrpControl | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.10 | TruthValue | read-create | The value of the object svcTlsGroupMvrpControl specifies whether MVRP control is enabled on this service-range. |
| INT svcTlsGroupOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.11 | INTEGER | read-only | The value of svcTlsGroupOperStatus indicates service instantiation status of this service group. A value of 'down' indicates: -- svcTmplGroupAdminStatus is set to 'disabled' or -- services for this group are being instantiated or -- service instantiation failed for this group. svcTlsGroupLastError provide information on the error encountered. A value of 'up' indicates that all services for this group have been successfully instantiated. A value of 'inProgress' indicates that this group is in process of transitioning to another state. |
| NTF svcTlsGroupOperStatusChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.35 | The svcTlsGroupOperStatusChanged notification is generated when there is a change in the value of svcTlsGroupOperStatus object. svcTlsGroupLastError provides information related to svcTlsGroupOperStatus object. | ||
| ROW svcTlsGroupRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.2 | RowStatus | read-create | This value of the object svcTlsGroupRowStatus specifies the status of this row. |
| TNA svcTlsGroupSapTmplName | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.9 | TNamedItemOrEmpty | read-create | The value of the object svcTlsGroupSapTmplName specifies the SAP template name associated with this service-range. |
| TMN svcTlsGroupStart | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.5 | TmnxServId | read-create | The value of the object svcTlsGroupStart specifies the start of the service identifier range. An 'inconsistentValue' error is returned when the value of svcTlsGroupStart is set to larger than the value of svcTlsGroupEnd. An 'inconsistentValue' error is also returned when the value of svcTlsGroupStart is set to default and svcTlsGroupStartVlanTag is set to non-default value. An 'inconsistentValue' error is also returned when the value of svcTlsGroupEnd is set to non-default value and svcTlsGroupStart is set to the default value. |
| QTA svcTlsGroupStartVlanTag | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.7 | QTagOrZero | read-create | The value of the object svcTlsGroupStartVlanTag specifies the start of the VLAN tag range. An 'inconsistentValue' error is also returned when the value of svcTlsGroupStart is set to default and svcTlsGroupStartVlanTag is set to non-default value. |
| TNA svcTlsGroupSvcTmplName | 1.3.6.1.4.1.6527.3.1.2.4.2.88.1.8 | TNamedItemOrEmpty | read-create | The value of the object svcTlsGroupSvcTmplName specifies the service template name associated with this service-range. |
| svcTlsGroupTable | 1.3.6.1.4.1.6527.3.1.2.4.2.88 | not-accessible | A table that contains TLS service range information for the service. | |
| TIM svcTlsGroupTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.87 | TimeStamp | read-only | The value of svcTlsGroupTblLastChanged indicates the sysUpTime at the time of the last modification of svcTlsGroupTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| svcTlsInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1 | not-accessible | TLS specific information about a service. | |
| svcTlsInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.3 | not-accessible | A table that contains TLS service information. | |
| TMN svcTlsIPmsiAdminState | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.3 | TmnxAdminState | read-create | The value of the object svcTlsIPmsiAdminState specifies the administrative state of the inclusive provider tunnel in this service. An 'inconsistentValue' error is retuned when attempting to set svcTlsIPmsiAdminState to 'inService' when svcTlsIPmsiType is set to 'none' or svcTlsIPmsiLspTmpl is set to its default value. |
| I32 svcTlsIPmsiDataDelayIntvl | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.4 | Integer32 | read-create | The value of the object svcTlsIPmsiDataDelayIntvl specifies the data delay interval associated for the inclusive provider tunnel in this service. |
| TNA svcTlsIPmsiLspName | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.9 | TNamedItemOrEmpty | read-only | The value of the object svcTlsIPmsiLspTmpl indicates the LSP name used for signalling inclusive provider tunnel in this service. |
| TNA svcTlsIPmsiLspTmpl | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.6 | TNamedItemOrEmpty | read-create | The value of the object svcTlsIPmsiLspTmpl specifies the name of the TIMETRA-MPLS-MIB::vRtrMplsLspTemplateName to be used for signalling inclusive provider tunnel in this service. An 'inconsistentValue' error is returned if svcTlsIPmsiLspTmpl does not exist in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable. An 'inconsistentValue' error is returned if this object is set to non-default when svcTlsIPmsiType is set to 'none'. |
| I32 svcTlsIPmsiRemainDataDelayIntvl | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.8 | Integer32 | read-only | The value of the object svcTlsIPmsiRemainDataDelayIntvl indicates the remaining data delay interval for the inclusive provider tunnel in this service. |
| T/F svcTlsIPmsiRootAndLeaf | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.7 | TruthValue | read-create | The value of the object svcTlsIPmsiRootAndLeaf specifies whether the node acts as both a root and leaf or only act as a leaf for P2MP LSP. |
| INT svcTlsIPmsiType | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.5 | INTEGER | read-create | The value of the object svcTlsIPmsiType specifies the type of protocol supported for the inclusive provider tunnel in this service. |
| T/F svcTlsL2ptTermEnabled | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.68 | TruthValue | read-only | The value of the object svcTlsL2ptTermEnabled indicates if 'L2PT-termination' and/or 'Bpdu-translation' is in use in this service by at least one SAP or spoke SDP Bind. If the value is 'true', it means that at least one of 'L2PT-termination' or 'Bpdu-translation' is enabled. When enabled it is not possible to enable stp on this service. |
| TMN svcTlsMacAgeing | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.32 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacAgeing specifies whether the MAC aging process is enabled in this TLS. |
| TMN svcTlsMacFlushOnFail | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.50 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacFlushOnFail specifies whether a special mac-flush is sent when a port or sap becomes operational down. |
| TMN svcTlsMacLearning | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.1 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacLearning specifies whether the MAC learning process is enabled in this TLS. |
| TMN svcTlsMacMoveAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.45 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMacMoveAdminStatus specifies the administrative state of the MAC movement feature associated with this service. |
| U32 svcTlsMacMoveMaxRate | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.43 | Unsigned32 | read-write | The value of the object svcTlsMacMoveMaxRate specifies the maximum rate at which MAC's can be re-learned in this TLS service, before the SAP where the moving MAC was last seen is automatically disabled in order to protect the system against undetected loops or duplicate MAC's. The rate is computed as the maximum number of re-learns allowed in a 5 second interval: e.g. the default rate of 2 re-learns per second corresponds to 10 re-learns in a 5 second period. |
| U32 svcTlsMacMoveNumRetries | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.78 | Unsigned32 | read-write | The value of the object svcTlsMacMoveNumRetries specifies the number of times retries are performed for reenabling the SAP/SDP. A value of zero indicates unlimited number of retries. |
| U32 svcTlsMacMoveRetryTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.44 | Unsigned32 | read-write | The value of the object svcTlsMacMoveRetryTimeout specifies the time in seconds to wait before a SAP that has been disabled after exceeding the maximum re-learn rate is re-enabled. A value of zero indicates that the SAP will not be automatically re-enabled after being disabled. If after the SAP is re-enabled it is disabled again, the effective retry timeout is doubled in order to avoid thrashing. An inconsistentValue error is returned if the value of this object is set to less than fie times the value of svcTlsSecPortsCumulativeFactor. |
| TMN svcTlsMacNotifAdminState | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.84 | TmnxEnabledDisabled | read-write | The value of svcTlsMacNotifAdminState specifies whether MAC notification messages should be sent. |
| U32 svcTlsMacNotifCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.83 | Unsigned32 | read-write | The value of svcTlsMacNotifCount specifies number of MAC notification messages to be sent. The default value for this object indicates that the value is inherited from svcMacNotifCount. |
| U32 svcTlsMacNotifInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.82 | Unsigned32 | read-write | The value of svcTlsMacNotifInterval specifies time-interval between subsequent MAC notification messages. The default value for this object indicates that the value is inherited from svcMacNotifInterval. |
| NTF svcTlsMacPinningViolation | 1.3.6.1.4.1.6527.3.1.3.4.2.0.11 | The svcTlsMacPinningViolation notification is generated when an attempt is made to assign a MAC address to another interface while this MAC address is pinned (i.e. assigned fixed to an interface). | ||
| T/F svcTlsMacRelearnOnly | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.46 | TruthValue | read-only | The value of the object svcTlsMacRelearnOnly indicates when set to 'true' that either the FDB table of this TLS service is full, or that the maximum system-wide number of MAC's supported by the agent has been reached, and thus MAC learning is temporary disabled, and only MAC re-learns can take place. |
| I32 svcTlsMacSubNetLen | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.79 | Integer32 | read-write | The value of the object svcTlsMacSubNetLen specifies the number of bits to be considered when performing MAC-Learning or MAC-Switching. |
| svcTlsMacV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.132 | The group of objects supporting management of Services mac-related capabilities on Alcatel-Lucent SROS series systems in 7.0 release. | ||
| TNA svcTlsMcPathMgmtPlcyName | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.74 | TNamedItem | read-write | The value of svcTlsMcPathMgmtPlcyName specifies the multicast policy name configured on this service. |
| NTF svcTlsMfibTableFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.10 | The svcTlsMfibTableFullAlarmCleared notification is generated when the utilization of the MFIB table drops to the value specified by svcTlsMfibTableFullLowWatermark. | ||
| NTF svcTlsMfibTableFullAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.9 | The svcTlsMfibTableFullAlarmRaised notification is generated when the utilization of the MFIB table increases to reach the value specified by svcTlsMfibTableFullHighWatermark. | ||
| I32 svcTlsMfibTableFullHighWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.48 | Integer32 | read-write | The value of the object svcTlsMfibTableFullHighWatermark specifies the utilization of the MFIB table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsMfibTableFullLowWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.49 | Integer32 | read-write | The value of the object svcTlsMfibTableFullLowWatermark specifies utilization of the MFIB table of this TLS service at which a table full alarm will be cleared by the agent. |
| I32 svcTlsMfibTableSize | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.47 | Integer32 | read-write | The value of the object svcTlsMfibTableSize specifies the maximum number of entries allowed in the MFIB table of this service. If the value is 0, then there is no limit. Allowable maximum value for this object will depend on the platform and the chassis-mode. |
| TMN svcTlsMrpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.70 | TmnxEnabledDisabled | read-write | The value of the object svcTlsMrpAdminStatus specifies whether the Multiple Registration Protocol (MRP) is enabled in this TLS. |
| U32 svcTlsMrpAttributeCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.72 | Unsigned32 | read-only | The value of the object svcTlsMrpAttributeCount indicates the number of MMRP attributes currently associated to the TLS by either being registered or declared. Note that an 'iVpls' service (with svcVplsType set to 'iVpls') holds a declaration in the 'bVpls' service (with svcVplsType set to 'bVpls') regardless of the state of the 'iVpls' service, although that declaration will not be propagated in the 'bVpls' service unless the svcOperStatus of 'iVpls' service is 'up'. |
| INT svcTlsMrpAttrRegFailedReason | 1.3.6.1.4.1.6527.3.1.2.4.6.40 | INTEGER | accessible-for-notify | The value of the object svcTlsMrpAttrRegFailedReason indicates the reason for MRP attribute registration failure. |
| NTF svcTlsMrpAttrRegistrationFailed | 1.3.6.1.4.1.6527.3.1.3.4.2.0.20 | The svcTlsMrpAttrRegistrationFailed notification is generated when registration fails for an MRP attribute. | ||
| NTF svcTlsMrpAttrTblFullAlarmCleared | 1.3.6.1.4.1.6527.3.1.3.4.2.0.26 | The svcTlsMrpAttrTblFullAlarmCleared notification is generated when the utilization of the MRP attribute table is below the value specified by svcTlsMrpAttrTblLowWatermark. | ||
| NTF svcTlsMrpAttrTblFullAlarmRaised | 1.3.6.1.4.1.6527.3.1.3.4.2.0.25 | The svcTlsMrpAttrTblFullAlarmRaised notification is generated when the utilization of the MRP attribute table is above the value specified by svcTlsMrpAttrTblHighWatermark. | ||
| I32 svcTlsMrpAttrTblHighWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.76 | Integer32 | read-write | The value of the object svcTlsMrpAttrTblHighWatermark specifies the utilization of the MRP attribute table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTlsMrpAttrTblLowWatermark | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.77 | Integer32 | read-write | The value of the object svcTlsMrpAttrTblLowWatermark specifies utilization of the MRP attribute table of this TLS service at which a table full alarm will be cleared by the agent. |
| U32 svcTlsMrpAttrType | 1.3.6.1.4.1.6527.3.1.2.4.6.41 | Unsigned32 | accessible-for-notify | The value of the object svcTlsMrpAttrType indicates the type of MRP attribute. |
| OCT svcTlsMrpAttrValue | 1.3.6.1.4.1.6527.3.1.2.4.6.42 | OCTET STRING | accessible-for-notify | The value of the object svcTlsMrpAttrValue indicates the value of MRP attribute. |
| U32 svcTlsMrpFailedRegisterCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.73 | Unsigned32 | read-only | The value of the object svcTlsMrpFailedRegisterCount indicates number of failed MRP attribute registrations in this TLS. |
| U32 svcTlsMrpFloodTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.75 | Unsigned32 | read-write | The value of the object svcTlsMrpFloodTime specifies the amount of time in seconds after a status change in the TLS during which traffic is flooded. Once that time expires, traffic will be delivered according to the MRP registrations which exist in the TLS. The value of 0 indicates that no flooding will occur on state changes in the TLS. |
| U32 svcTlsMrpMaxAttributes | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.71 | Unsigned32 | read-write | The value of the object svcTlsMrpMaxAttributes indicates maximum number of MMRP attributes supported in this TLS. In most cases the default value is 2048 MRP attributes. For some platform and chassis types, especially single slot chassises, the default value will be lower due to resource constraints. The default value is set to 8192 when svcTlsExtMmrpEndStationOnly is set to 'true'. An inconsistentValue error is returned if an attempt is made to set this object to a value the platform cannot support. |
| svcTlsPbbIgmpSnpgMRtrEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.82.1 | not-accessible | PBB I-Component instance-specific information about a specific IGMP Snooping MRouter in the B-Component instance. Entries in this table can be created or deleted via SNMP operations. | |
| TIM svcTlsPbbIgmpSnpgMRtrLastCh | 1.3.6.1.4.1.6527.3.1.2.4.2.82.1.5 | TimeStamp | read-only | The value of svcTlsPbbIgmpSnpgMRtrLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row. |
| TNA svcTlsPbbIgmpSnpgMRtrMacName | 1.3.6.1.4.1.6527.3.1.2.4.2.82.1.3 | TNamedItem | not-accessible | The value of svcTlsPbbIgmpSnpgMRtrMacName specifies the Destination MAC-Address-Name in the Backbone VPLS to reach a specific IGMP Snooping MRouter. In the case of an I-Component instance that is multi-homed on 2 physical nodes, an I-component instance, after becoming active, uses this MAC address as the destination MAC address to reach that IGMP Snooping MRouter. This allows to maintain the communication with that MRouter while no IGMP Queries from that MRouter have been snooped by this I-component instance. |
| ROW svcTlsPbbIgmpSnpgMRtrRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.82.1.4 | RowStatus | read-create | The value of svcTlsPbbIgmpSnpgMRtrRowStatus specifies the row status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. |
| TMN svcTlsPbbIgmpSnpgMRtrSvcIdBVpls | 1.3.6.1.4.1.6527.3.1.2.4.2.82.1.2 | TmnxServId | not-accessible | The value of the object svcTlsPbbIgmpSnpgMRtrSvcIdBVpls specifies the Service identifier of the B-Component instance. |
| TMN svcTlsPbbIgmpSnpgMRtrSvcIdIVpls | 1.3.6.1.4.1.6527.3.1.2.4.2.82.1.1 | TmnxServId | not-accessible | The value of the object svcTlsPbbIgmpSnpgMRtrSvcIdIVpls specifies the Service identifier of the I-Component instance. |
| svcTlsPbbIgmpSnpgMRtrTable | 1.3.6.1.4.1.6527.3.1.2.4.2.82 | not-accessible | A table that contains Provider Backbone Bridging (PBB/IEEE 802.1ah) IGMP Snooping MRouter Destination information. | |
| TMN svcTlsPerSvcHashing | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.85 | TmnxEnabledDisabled | read-write | The value of svcTlsPerSvcHashing specifies service-level hashing for Ethernet services. |
| svcTlsPmsiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1 | not-accessible | The svcTlsPmsiEntry contains provider-tunnel related objects. | |
| TIM svcTlsPmsiLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.2 | TimeStamp | read-only | The value of svcTlsPmsiLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcTlsPmsiRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.126.1.1 | RowStatus | read-create | The value of svcTlsPmsiRowStatus is used for the creation and deletion of provider-tunnel context in a VPLS service. |
| svcTlsPmsiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.126 | not-accessible | The svcTlsPmsiTable contains entries for provider-tunnel in a VPLS service context. | |
| TIM svcTlsPmsiTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.125 | TimeStamp | read-only | The value of svcTlsPmsiTableLastChanged indicates the sysUpTime at the time of the last modification of svcTlsPmsiTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcTlsPriPortsCumulativeFactor | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.66 | Unsigned32 | read-write | The value of the object svcTlsPriPortsCumulativeFactor specifies a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature. An inconsistentValue error is returned if an attempt is made to set the value of svcTlsPriPortsCumulativeFactor to a value lower than or equal to svcTlsSecPortsCumulativeFactor. |
| T/F svcTlsPropagateMacFlush | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.69 | TruthValue | read-write | The value of svcTlsPropagateMacFlush specifies whether 'MAC flush' messages received from the given LDP are propagated to all spoke-SDPs and mesh-SDPs within the context of this VPLS service. The propagation will follow the 'split-horizon' principle and any data-path blocking in order to avoid the looping of these messages. The value of 'true' enables the propagation. |
| T/F svcTlsPropMacFlushFromBVpls | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.81 | TruthValue | read-write | The value of the object svcTlsPropMacFlushFromBVpls specifies whether to propagate any 'MAC flush' from 'bVpls' into the local 'iVpls'. |
| U32 svcTlsSecPortsCumulativeFactor | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.67 | Unsigned32 | read-write | The value of the object svcTlsSecPortsCumulativeFactor specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature. An inconsistentValue error is returned if an attempt is made to set the value of svcTlsSecPortsCumulativeFactor to a value greater than or equal to svcTlsPriPortsCumulativeFactor. |
| T/F svcTlsSendFlushOnBVplsFail | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.80 | TruthValue | read-write | The value of the object svcTlsSendFlushOnBVplsFail specifies whether a special 'MAC flush' is sent in the local 'iVpls' following a failure of SAP/Endpoint/SDP in the 'bVpls'. |
| INT svcTlsShcvAction | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.62 | INTEGER | read-write | The value of the object svcTlsShcvAction indicates whether any action should be triggered when the connectivity check fails. |
| U32 svcTlsShcvInterval | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.65 | Unsigned32 | read-write | The value of the object svcTlsShcvInterval specifies the interval in minutes between connectivity checks. Zero means no connectivity checking. |
| U32 svcTlsShcvRetryCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.88 | Unsigned32 | read-write | The value of the object svcTlsShcvRetryCount specifies the number of connectivity check retransmissions. Setting the value to n specifies that, for any given host, at most (n+1) probes are done each interval, and (n+1) missed replies are considered as a connectivity failure. |
| U32 svcTlsShcvRetryTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.87 | Unsigned32 | read-write | The value of the object svcTlsShcvRetryTimeout specifies the timeout in seconds before a connectivity check retransmission. |
| IP svcTlsShcvSrcIp | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.63 | IpAddress | read-write | The value of the object svcTlsShcvSrcIp specifies the source IP address used when doing the connectivity check. The value 0.0.0.0 indicates that no host IP address is specified. |
| MAC svcTlsShcvSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.64 | MacAddress | read-write | The value of the object svcTlsShcvSrcMac specifies the MAC address used when doing the connectivity check. The value 0:0:0:0:0:0 indicates that no host MAC address is specified. |
| NTF svcTlsSiteDesigFwdrChg | 1.3.6.1.4.1.6527.3.1.3.4.2.0.34 | The svcTlsSiteDesigFwdrChg notification is generated when there is a change in the 'designated forwarder' status for the TLS site. | ||
| TMN svcTlsSiteIdAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.4 | TmnxEnabledDisabled | read-create | The value of svcTlsSiteIdAdminStatus specifies the administrative state of the site instance associated with this service. |
| I32 svcTlsSiteIdBootTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.14 | Integer32 | read-create | The value of svcTlsSiteIdBootTimer specifies how long the system waits after a node reboot before running the DF (designated- forwarder) election algorithm. When this object is set to default value, system uses value of TIMETRA-MC-REDUNDANCY-MIB::tmnxMcRedBgpMultiHomeBootTimer object. |
| T/F svcTlsSiteIdDesignatedFwdr | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.13 | TruthValue | read-only | The value of the svcTlsSiteIdDesignatedFwdr indicates whether this site has been declared as 'designated-forwarder' depending on the result of the BGP election. |
| U32 svcTlsSiteIdDfChgCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.17 | Unsigned32 | read-only | The value of svcTlsSiteIdDfChgCnt indicates the number of times designated forwarder has changed. |
| U32 svcTlsSiteIdDfUpTime | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.16 | Unsigned32 | read-only | The value of svcTlsSiteIdDfUpTime indicates the uptime of the designated forwarder for this site. |
| TMN svcTlsSiteIdEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.7 | TmnxEncapVal | read-create | The value of svcTlsSiteIdEncapValue specifies the encap-value of the port associated with this site. An 'inconsistentValue' error is returned when svcTlsSiteIdPortId is set to non-default and svcTlsSiteIdEncapValue is set to its default value or when svcTlsSiteIdPortId is set to its default value and svcTlsSiteIdEncapValue is set to non-default value. An 'inconsistentValue' error is returned if an attempt is made to set the non-default value to more than one of the following object groups (SAP, SDP-BIND, Split-Horizon Group name): SAP: svcTlsSiteIdPortId, svcTlsSiteIdEncapValue SDP-BIND: svcTlsSiteIdSdpBindId Split-Horizon Group name: svcTlsSiteIdShgName. |
| svcTlsSiteIdEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1 | not-accessible | Information about a particular site in a specific service. | |
| I32 svcTlsSiteIdFailedThresh | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.11 | Integer32 | read-create | The value of the svcTlsSiteIdFailedThresh specifies the number of objects which are required to be in the 'down' state for this site to be declared in the 'down' state. The value of '-1' indicates that 'all' objects in this site should be down for the site to be declared in the 'down' state. |
| TIM svcTlsSiteIdLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.3 | TimeStamp | read-only | The value of svcTlsSiteIdLastChanged indicates the timestamp of last change to this row in svcTlsSiteIdTable. |
| TNA svcTlsSiteIdMonitorOperGrp | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.19 | TNamedItemOrEmpty | read-create | The value of the svcTlsSiteIdMonitorOperGrp specifies the Operational-Group identifier which will affect the state of this site. |
| TNA svcTlsSiteIdName | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.1 | TNamedItem | not-accessible | The value of svcTlsSiteIdName defines the name for the specific site. |
| TSI svcTlsSiteIdOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.12 | TSiteOperStatus | read-only | The value of the svcTlsSiteIdOperStatus indicates the operational status of the site. |
| TMN svcTlsSiteIdPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.6 | TmnxPortID | read-create | The value of svcTlsSiteIdPortId specifies the port associated with this site. The default value for this object indicates an invalid port. An 'inconsistentValue' error is returned when svcTlsSiteIdPortId is set to non-default and svcTlsSiteIdEncapValue is set to its default value or when svcTlsSiteIdPortId is set to its default value and svcTlsSiteIdEncapValue is set to non-default value. An 'inconsistentValue' error is returned if an attempt is made to set the non-default value to more than one of the following object groups (SAP, SDP-BIND, Split-Horizon Group name): SAP: svcTlsSiteIdPortId, svcTlsSiteIdEncapValue SDP-BIND: svcTlsSiteIdSdpBindId Split-Horizon Group name: svcTlsSiteIdShgName. |
| ROW svcTlsSiteIdRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.2 | RowStatus | read-create | The value of svcTlsSiteIdRowStatus is used for the creation and deletion of rows in this table. |
| SDP svcTlsSiteIdSdpBindId | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.8 | SdpBindId | read-create | The value of the svcTlsSiteIdSdpBindId specifies the value of SDP binding associated with this site. An 'inconsistentValue' error is returned if an attempt is made to set the non-default value to more than one of the following object groups (SAP, SDP-BIND, Split-Horizon Group name): SAP: svcTlsSiteIdPortId, svcTlsSiteIdEncapValue SDP-BIND: svcTlsSiteIdSdpBindId Split-Horizon Group name: svcTlsSiteIdShgName. |
| T/F svcTlsSiteIdShgMeshSdp | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.10 | TruthValue | read-create | The value of the svcTlsSiteIdShgMeshSdp specifies whether this site-id is to be applied to all the mesh-SDPs in this service. |
| TNA svcTlsSiteIdShgName | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.9 | TNamedItemOrEmpty | read-create | The value of the svcTlsSiteIdShgName specifies the value of split-horizon group associated with this site. An 'inconsistentValue' error is returned if an attempt is made to set the non-default value to more than one of the following object groups (SAP, SDP-BIND, Split-Horizon Group name): SAP: svcTlsSiteIdPortId, svcTlsSiteIdEncapValue SDP-BIND: svcTlsSiteIdSdpBindId Split-Horizon Group name: svcTlsSiteIdShgName. |
| I32 svcTlsSiteIdSiteActTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.15 | Integer32 | read-create | The value of svcTlsSiteIdSiteActTimer specifies the time-period the system keeps the local sites in standby status, waiting for BGP updates from remote PEs before running the DF (designated-forwarder) election algorithm to decide whether the site should be unblocked. When this object is set to default value, system uses value of TIMETRA-MC-REDUNDANCY-MIB::tmnxMcRedBgpMultiHomeSiteTimer object. |
| TMN svcTlsSiteIdSiteId | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.5 | TmnxSiteId | read-create | The value of svcTlsSiteIdSiteId specifies the identifier for the site in this service. The value of svcTlsSiteIdSiteId is a two byte identifier usually employed for the BGP Multi-homing solution. It identifies the BGP Multi-homing site associated with one or a set of objects (SAPs, PWs or combination). The value of svcTlsSiteIdSiteId must be identical between the two PEs carrying the connection to the access device multi-homed to the PEs. |
| svcTlsSiteIdTable | 1.3.6.1.4.1.6527.3.1.2.4.2.75 | not-accessible | This table maintains the information about different sites defined in a service. | |
| TIM svcTlsSiteIdTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.74 | TimeStamp | read-only | The value of svcTlsSiteIdTblLastChanged indicates the sysUpTime at the time of the last modification of svcTlsSiteIdTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcTlsSiteIdTimerRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.75.1.18 | Unsigned32 | read-only | The value of svcTlsSiteIdTimerRemain indicates remaining time in the timer for this site. |
| TMN svcTlsSpbAdminState | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.7 | TmnxAdminState | read-create | The svcTlsSpbAdminState indicates the desired administrative state for Shortest Path Bridging on this VPLS service. |
| svcTlsSpbEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1 | not-accessible | A Shortest Path Bridging entry in the svcTlsSpbTable. | |
| TMN svcTlsSpbFid | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.4 | TmnxSpbFid | read-create | The value of svcTlsSpbFid specifies forwarding database identifier associated with this Shortest Path Bridging context in this VPLS service. An 'inconsistentValue' error is returned if value of svcTlsSpbFid is set to a different value after the row-creation time. |
| I32 svcTlsSpbIsisInstance | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.3 | Integer32 | read-create | The value of svcTlsSpbIsisInstance specifies the ISIS-MIB::isisSysInstance to be used with this Shortest Path Bridging context in this VPLS service. An 'inconsistentValue' error is returned if value of svcTlsSpbIsisInstance is set to a different value after the row-creation time. |
| BRI svcTlsSpbL1BridgeId | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.9 | BridgeId | read-only | The svcTlsSpbL1BridgeId indicates the level 1 designated bridge identifier for Shortest Path Bridging context on this VPLS service. |
| TMN svcTlsSpbL1BridgePriority | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.5 | TmnxSpbBridgePriority | read-create | The value of svcTlsSpbL1BridgePriority specifies the level 1 four bit bridge priority associated with this Shortest Path Bridging context in this VPLS service. |
| INT svcTlsSpbL1FwdTreeTopoMcast | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.8 | INTEGER | read-only | The value of svcTlsSpbL1FwdTreeTopoMcast indicates level 1 multicast forwarding to follow the shortest path tree or to follow a single tree for this Shortest Path Bridging context in this VPLS service. |
| INT svcTlsSpbL1FwdTreeTopoUcast | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.6 | INTEGER | read-create | The value of svcTlsSpbL1FwdTreeTopoUcast specifies level 1 unicast forwarding to follow the shortest path tree or to follow a single tree for this Shortest Path Bridging context in this VPLS service. |
| BRI svcTlsSpbL1McastDesigBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.10 | BridgeId | read-only | The svcTlsSpbL1McastDesigBridgeId indicates the level 1 designated bridge identifier for multicast traffic for Shortest Path Bridging on this VPLS service. |
| TIM svcTlsSpbLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.2 | TimeStamp | read-only | The value of svcTlsSpbLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcTlsSpbRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.120.1.1 | RowStatus | read-create | The value of svcTlsSpbRowStatus is used for the creation and deletion of Shortest Path Bridging context in a VPLS service. |
| svcTlsSpbTable | 1.3.6.1.4.1.6527.3.1.2.4.2.120 | not-accessible | svcTlsSpbTable contains entries for Shortest Path Bridging in a VPLS service context. | |
| TIM svcTlsSpbTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.119 | TimeStamp | read-only | The value of svcTlsSpbTableLastChanged indicates the sysUpTime at the time of the last modification of svcTlsSpbTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| svcTlsSpbUserSvcEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.130.1 | not-accessible | The svcTlsSpbUserSvcEntry contains user VPLS information for each control VPLS per forwarding data-base identfier. | |
| TMN svcTlsSpbUserSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.130.1.1 | TmnxServId | not-accessible | The value of svcTlsSpbUserSvcId is used for the creation and deletion of provider-tunnel context in a VPLS service. |
| TIM svcTlsSpbUserSvcLastUpdate | 1.3.6.1.4.1.6527.3.1.2.4.2.130.1.2 | TimeStamp | read-only | The value of svcTlsSpbUserSvcLastUpdate indicates the sysUpTime at the time this entry was last updated. |
| svcTlsSpbUserSvcTable | 1.3.6.1.4.1.6527.3.1.2.4.2.130 | not-accessible | The svcTlsSpbUserSvcTable contains entries for user VPLS for each control VPLS per forwarding data-base identifier. | |
| TMN svcTlsStpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.8 | TmnxEnabledDisabled | read-write | The value of the object svcTlsStpAdminStatus specifies the administrative state of the Spanning Tree Protocol instance associated with this service. |
| MAC svcTlsStpBridgeAddress | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.10 | MacAddress | read-only | The value of the object svcTlsStpBridgeAddress indicates the MAC address used to identify this bridge in the network. It is used as the last six octets of the Bridge ID included in the Configuration BPDU's generated by this bridge. The most significant 38 bits of the bridge address are taken from the base MAC address of the device, while the least significant 10 bits are based on the corresponding TLS instance ID. |
| I32 svcTlsStpBridgeForwardDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.22 | Integer32 | read-write | The value of the object svcTlsStpBridgeForwardDelay specifies the value that all bridges should use for 'ForwardDelay' when this bridge is acting as the root bridge. |
| I32 svcTlsStpBridgeHelloTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.21 | Integer32 | read-write | The value of the object svcTlsStpBridgeHelloTime specifies the value that all bridges should use for 'HelloTime' when this bridge is acting as the root bridge. |
| I32 svcTlsStpBridgeInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.41 | Integer32 | read-only | The value of the object svcTlsStpBridgeInstanceId indicates a 12 bit value chosen by the the system. It is part of the STP bridge Id, which consists of 8 octets: - 4 highest bits of octet 1: the bridge priority (ref svcTlsStpPriority) - 12 bits (4 lowest bits of octet 1 + 8 bits of octet 2): bridge instance Id (this object!). - 6 octets: bridge MAC addess ref svcTlsStpBridgeAddress The value is set to 0 if svcTlsStpOperStatus is not 'up'. |
| I32 svcTlsStpBridgeMaxAge | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.20 | Integer32 | read-write | The value of the object svcTlsStpBridgeMaxAge specifies the value that all bridges should use for 'MaxAge' when this bridge is acting as the root bridge. |
| I32 svcTlsStpBridgeMaxHops | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.53 | Integer32 | read-write | The value of the object svcTlsStpBridgeMaxHops specifies the maximum number of hops (known as 'MaxHops' in 802.1Q). |
| I32 svcTlsStpCistIntRootCost | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.55 | Integer32 | read-only | The value of the object svcTlsStpCistIntRootCost indicates the cost of the path to the CIST regional root bridge as seen from this bridge. |
| BRI svcTlsStpCistRegionalRoot | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.54 | BridgeId | read-only | The value of the object svcTlsStpCistRegionalRoot indicates the bridge identifier of the regional root of the CIST spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as the CIST Regional Root Identifier parameter in all MSTP BPDUs originated by this node. |
| I32 svcTlsStpCistRegionalRootPort | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.57 | Integer32 | read-only | The value of the object svcTlsStpCistRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge. |
| I32 svcTlsStpCistRemainingHopCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.56 | Integer32 | read-only | The value of the object svcTlsStpCistRemainingHopCount specifies the remaining number of hops. |
| BRI svcTlsStpDesignatedRoot | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.13 | BridgeId | read-only | The value of the object svcTlsStpDesignatedRoot indicates the bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as the Root Identifier parameter in all Configuration BPDUs originated by this node. |
| I32 svcTlsStpForwardDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.19 | Integer32 | read-only | The value of the object svcTlsStpForwardDelay indicates how fast a port changes its state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state. This value is also used to age all dynamic entries in the Forwarding Database when a topology change has been detected and is underway. This is the actual value that this bridge is currently using. |
| I32 svcTlsStpHelloTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.17 | Integer32 | read-only | The value of the object svcTlsStpHelloTime indicates the amount of time between the transmission of Configuration BPDUs. This is the actual value that this bridge is currently using. |
| I32 svcTlsStpHoldCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.39 | Integer32 | read-write | The value of the object svcTlsStpHoldCount specifies the maximum number of BPDUs that are transmitted in any 'HelloTime' interval. The value used by the bridge to limit the maximum transmission rate of BPDUs. |
| I32 svcTlsStpHoldTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.18 | Integer32 | read-only | The value of the object svcTlsStpHoldTime indicates the interval length during which no more than two Configuration BPDUs shall be transmitted by this bridge. This object is no longer used. It is replaced by the object svcTlsStpHoldCount. This object was made obsolete in the 3.0 release. |
| I32 svcTlsStpMaxAge | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.16 | Integer32 | read-only | The value of the object svcTlsStpMaxAge indicates the maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded. This is the actual value that this bridge is currently using. |
| INT svcTlsStpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.30 | INTEGER | read-only | The value of the object svcTlsStpOperStatus indicates the operating status of the Spanning Tree Protocol instance associated with this service. |
| BRI svcTlsStpPrimaryBridge | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.40 | BridgeId | read-only | The value of the object svcTlsStpPrimaryBridge indicates the BridgeId of the bridge that acts as the primary bridge, being the gateway from the core mesh towards the root bridge. |
| I32 svcTlsStpPriority | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.9 | Integer32 | read-write | The value of the object svcTlsStpPriority specifies the priority of the Spanning Tree Protocol instance associated with this service. It is used as the highest 4 bits of the Bridge ID included in the Configuration BPDU's generated by this bridge. The svcTlsStpPriority can only take-on values which multiples of 4096 (4k). If a value is specified which is not a multiple of 4K, then this value will be replaced by the closest multiple of 4K which is lower then the value entered. |
| STR svcTlsStpRegionName | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.51 | DisplayString | read-write | The value of the object svcTlsStpRegionName specifies the MSTP region name. Together with region revision and VLAN-to-instance assignment it defines the MSTP region. |
| I32 svcTlsStpRegionRevision | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.52 | Integer32 | read-write | The value of the object svcTlsStpRegionRevision specifies the MSTP region revision number. Together with region name and VLAN-to-instance assignment it defines the MSTP region. |
| I32 svcTlsStpRootCost | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.14 | Integer32 | read-only | The value of the object svcTlsStpRootCost indicates the cost of the path to the root bridge as seen from this bridge. |
| I32 svcTlsStpRootPort | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.15 | Integer32 | read-only | The value of the object svcTlsStpRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the root bridge. |
| TIK svcTlsStpTimeSinceTopologyChange | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.11 | TimeTicks | read-only | The value of the object svcTlsStpTimeSinceTopologyChange indicates the time (in hundredths of a second) since the last time a topology change was detected by the Spanning Tree Protocol instance associated with this service. |
| T/F svcTlsStpTopologyChangeActive | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.33 | TruthValue | read-only | The value of the object svcTlsStpTopologyChangeActive indicates, when set to 'true', that a topology change is currently in progress. |
| I32 svcTlsStpTopologyChanges | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.12 | Integer32 | read-only | The value of the object svcTlsStpTopologyChanges indicates the total number of topology changes detected by the Spanning Tree Protocol instance associated with this service since the management entity was last reset or initialized. |
| STP svcTlsStpVcpOperProtocol | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.42 | StpProtocol | read-only | The value of the object svcTlsStpVcpOperProtocol indicates whether stp, rstp or mstp is running on this VCP. If the protocol is not enabled on this VCP, the value notApplicable is returned. |
| INT svcTlsStpVersion | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.38 | INTEGER | read-write | The value of the object svcTlsStpVersion specifies the version of Spanning Tree Protocol the bridge is currently running. The value 'rstp' corresponds to the Rapid Spanning Tree Protocol specified in IEEE 802.1D/D4-2003. The value 'compDot1w' corresponds to the mode where the Rapid Spanning Tree is backward compatible with IEEE 802.1w. The value 'dot1w' corresponds to the Rapid Spanning Tree Protocol fully conformant to IEEE 802.1w. The value 'mstp' corresponds to the Multiple Spanning Tree Protocol specified in IEEE 802.1Q-REV/D3.0-04/2005. The value 'pmstp' corresponds to Provider MSTP protocol compliant with IEEE-802.1ad-2005. New values may be defined as future versions of the protocol become available. |
| INT svcTlsStpVirtualRootBridgeStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.31 | INTEGER | read-only | The value of the object svcTlsStpVirtualRootBridgeStatus indicates the operating status of the Virtual Root Bridge of the Spanning Tree Protocol instance associated with this service. The status of the Virtual Root Bridge is 'up' when there is connectivity to the core: i.e. one or more SDP's in this service are operationally up. |
| T/F svcTlsTempFloodActive | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.90 | TruthValue | read-only | The value of the object svcTlsTempFloodActive indicates whether temporary flooding is currently active in this TLS. |
| I32 svcTlsTempFloodChangeCount | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.91 | Integer32 | read-only | The value of the object svcTlsTempFloodChangeCount specifies the number of times temporary flooding status changed from inactive to active in this TLS. The value of this object resets to zero when temporary flooding is disabled. |
| I32 svcTlsTempFloodTime | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.89 | Integer32 | read-write | The value of the object svcTlsTempFloodTime specifies duration of time traffic will be flooded on a TLS status change in this TLS. Value of '-1' disables this flooding behavior. |
| VPN svcTlsVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.3.1.36 | VpnId | read-only | The value of the object svcTlsVpnId indicates the VPN ID of the associated TLS service. |
| TMN svcTmplCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.7 | TmnxCustId | read-create | The value of the object svcTmplCustId specifies the customer identifier of the service. |
| svcTmplEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1 | not-accessible | Basic information about a specific service template. | |
| TIM svcTmplLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.3 | TimeStamp | read-only | The value of svcTmplLastChanged indicates the timestamp of last change to this row in svcTmplTable. |
| INT svcTmplMtu | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.6 | INTEGER | read-create | The value of the object svcTmplMtu specifies the largest frame size (in octets) that this service can handle. The default value of this object depends on the service type: 1514 octets for epipe, p3pipe and tls, 1508 for apipe and fpipe, and 1500 octets for vprn, ipipe and ies, 1514 octets for cpipe. |
| TNA svcTmplName | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.1 | TNamedItem | not-accessible | The value of the svcTmplName specifies the Service template name. This name should unique within the service template domain. |
| ROW svcTmplRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.2 | RowStatus | read-create | This value of the object svcTmplRowStatus specifies the status of this row. |
| U32 svcTmplSvcCount | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.4 | Unsigned32 | read-only | The value of svcTmplSvcCount indicates the number of instantiated services created using this template. |
| svcTmplTable | 1.3.6.1.4.1.6527.3.1.2.4.2.86 | not-accessible | A table that contains basic service template information. | |
| TIM svcTmplTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.85 | TimeStamp | read-only | The value of svcTmplTblLastChanged indicates the sysUpTime at the time of the last modification of svcTmplTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcTmplTlsDiscardUnknownDest | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.3 | TmnxEnabledDisabled | read-write | The value of the object svcTmplTlsDiscardUnknownDest specifies whether frames received with an unknown destination MAC are discarded in this TLS. |
| svcTmplTlsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1 | not-accessible | This table contains basic information about a specific VPLS service template. An entry in this table is created when an entry is created in the svcTmplTable with svcTmplType set to 'tls'. Entry is deleted when corrosponding entry is deleted in the svcTmplTable. | |
| I32 svcTmplTlsFdbLocalAgeTime | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.5 | Integer32 | read-write | The value of the object svcTmplTlsFdbLocalAgeTime specifies the number of seconds used to age out TLS FDB entries learned on local SAPs. |
| I32 svcTmplTlsFdbRemoteAgeTime | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.6 | Integer32 | read-write | The value of svcTmplTlsFdbRemoteAgeTime specifies the number of seconds used to age out TLS FDB entries learned on an SDP. These entries correspond to MAC addresses learned on remote SAPs. |
| I32 svcTmplTlsFdbTableFullHighWMark | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.13 | Integer32 | read-write | The value of svcTmplTlsFdbTableFullHighWMark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be raised by the agent. |
| I32 svcTmplTlsFdbTableFullLowWMark | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.14 | Integer32 | read-write | The value of svcTmplTlsFdbTableFullLowWMark specifies the utilization of the FDB table of this TLS service at which a table full alarm will be cleared by the agent. |
| I32 svcTmplTlsFdbTableSize | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.4 | Integer32 | read-write | The value of svcTmplTlsFdbTableSize specifies the maximum number of learned and static entries allowed in the FDB of this service. |
| TIM svcTmplTlsLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.1 | TimeStamp | read-only | The value of svcTmplTlsLastChanged indicates the timestamp of last change to this row in svcTmplTlsTable. |
| TMN svcTmplTlsMacAgeing | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.12 | TmnxEnabledDisabled | read-write | The value of svcTmplTlsMacAgeing specifies whether the MAC aging process is enabled in this TLS. |
| TMN svcTmplTlsMacLearning | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.2 | TmnxEnabledDisabled | read-write | The value of the object svcTmplTlsMacLearning specifies whether the MAC learning process is enabled in this TLS. |
| TMN svcTmplTlsMacMoveAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.21 | TmnxEnabledDisabled | read-write | The value of svcTmplTlsMacMoveAdminStatus specifies the administrative state of the MAC movement feature associated with this service. |
| U32 svcTmplTlsMacMoveMaxRate | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.19 | Unsigned32 | read-write | The value of svcTmplTlsMacMoveMaxRate specifies the maximum rate at which MAC's can be re-learned in this TLS service, before the SAP where the moving MAC was last seen is automatically disabled in order to protect the system against undetected loops or duplicate MAC's. The rate is computed as the maximum number of re-learns allowed in a 5 second interval: e.g. the default rate of 2 re-learns per second corresponds to 10 re-learns in a 5 second period. |
| U32 svcTmplTlsMacMoveNumRetries | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.24 | Unsigned32 | read-write | The value of svcTmplTlsMacMoveNumRetries specifies the number of times retries are performed for reenabling the SAP/SDP. A value of zero indicates unlimited number of retries. |
| U32 svcTmplTlsMacMoveRetryTimeout | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.20 | Unsigned32 | read-write | The value of svcTmplTlsMacMoveRetryTimeout specifies the time in seconds to wait before a SAP that has been disabled after exceeding the maximum re-learn rate is re-enabled. A value of zero indicates that the SAP will not be automatically re-enabled after being disabled. If after the SAP is re-enabled it is disabled again, the effective retry timeout is doubled in order to avoid thrashing. An inconsistentValue error is returned if the value of this object is set to less than fie times the value of svcTmplTlsSecPortsCumFactor. |
| TMN svcTmplTlsPerSvcHashing | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.17 | TmnxEnabledDisabled | read-write | The value of svcTmplTlsPerSvcHashing specifies service-level hashing for Ethernet services. An 'inconsistentValue' error is returned if this object is set to non-default value when svcVplsType for the service is set to 'bVpls'. |
| U32 svcTmplTlsPriPortsCumFactor | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.22 | Unsigned32 | read-write | The value of svcTmplTlsPriPortsCumFactor specifies a factor for the primary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTmplTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature. An inconsistentValue error is returned if an attempt is made to set the value of svcTmplTlsPriPortsCumFactor to a value lower than or equal to svcTmplTlsSecPortsCumFactor. |
| U32 svcTmplTlsSecPortsCumFactor | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.23 | Unsigned32 | read-write | The value of svcTmplTlsSecPortsCumFactor specifies a factor for the secondary ports defining how many MAC-relearn periods should be used to measure the MAC-relearn rate, svcTmplTlsMacMoveMaxRate. This rate must be exceeded during consecutive periods before the corresponding ports (SAP and/or spoke-SDP) are blocked by the MAC-move feature. An inconsistentValue error is returned if an attempt is made to set the value of svcTmplTlsSecPortsCumFactor to a value greater than or equal to svcTmplTlsPriPortsCumFactor. |
| TMN svcTmplTlsStpAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.7 | TmnxEnabledDisabled | read-write | The value of svcTmplTlsStpAdminStatus specifies the administrative state of the Spanning Tree Protocol instance associated with this service. |
| I32 svcTmplTlsStpBridgeForwardDelay | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.11 | Integer32 | read-write | The value of svcTmplTlsStpBridgeForwardDelay specifies the value that all bridges should use for 'ForwardDelay' when this bridge is acting as the root bridge. |
| I32 svcTmplTlsStpBridgeHelloTime | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.10 | Integer32 | read-write | The value of svcTmplTlsStpBridgeHelloTime specifies the value that all bridges should use for 'HelloTime' when this bridge is acting as the root bridge. |
| I32 svcTmplTlsStpBridgeMaxAge | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.9 | Integer32 | read-write | The value of svcTmplTlsStpBridgeMaxAge specifies the value that all bridges should use for 'MaxAge' when this bridge is acting as the root bridge. |
| I32 svcTmplTlsStpHoldCount | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.16 | Integer32 | read-write | The value of svcTmplTlsStpHoldCount specifies the maximum number of BPDUs that are transmitted in any 'HelloTime' interval. The value used by the bridge to limit the maximum transmission rate of BPDUs. |
| I32 svcTmplTlsStpPriority | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.8 | Integer32 | read-write | The value of svcTmplTlsStpPriority specifies the priority of the Spanning Tree Protocol instance associated with this service. It is used as the highest 4 bits of the Bridge ID included in the Configuration BPDU's generated by this bridge. The svcTmplTlsStpPriority can only take-on values which multiples of 4096 (4k). If a value is specified which is not a multiple of 4K, then this value will be replaced by the closest multiple of 4K which is lower then the value entered. |
| INT svcTmplTlsStpVersion | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.15 | INTEGER | read-write | The value of svcTmplTlsStpVersion specifies the version of Spanning Tree Protocol the bridge is currently running. The value 'rstp' corresponds to the Rapid Spanning Tree Protocol specified in IEEE 802.1D/D4-2003. The value 'compDot1w' corresponds to the mode where the Rapid Spanning Tree is backward compatible with IEEE 802.1w. The value 'dot1w' corresponds to the Rapid Spanning Tree Protocol fully conformant to IEEE 802.1w. The value 'mstp' corresponds to the Multiple Spanning Tree Protocol specified in IEEE 802.1Q-REV/D3.0-04/2005. The value 'pmstp' corresponds to Provider MSTP protocol compliant with IEEE-802.1ad-2005. New values may be defined as future versions of the protocol become available. |
| svcTmplTlsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.95 | not-accessible | A table that contains VPLS service template information. | |
| TIM svcTmplTlsTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.94 | TimeStamp | read-only | The value of svcTmplTlsTblLastChanged indicates the sysUpTime at the time of the last modification of svcTmplTlsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| I32 svcTmplTlsTempFloodTime | 1.3.6.1.4.1.6527.3.1.2.4.2.95.1.18 | Integer32 | read-write | The value of svcTmplTlsTempFloodTime specifies duration of time traffic will be flooded on a TLS status change in this TLS. Value of '-1' disables this flooding behavior. |
| SER svcTmplType | 1.3.6.1.4.1.6527.3.1.2.4.2.86.1.5 | ServType | read-create | The value of the object svcTmplType specifies the service type: e.g. epipe, tls, etc. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. An 'inconsistentValue' error is returned if an attempt is made to change the value of this object after row creation. |
| TNA svcTmplUsed | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.32 | TNamedItemOrEmpty | read-only | The value of the svcTmplUsed indicates the name of the service-template used to create this service. A value of empty string indicates that this service was not created using a service-template. |
| INT svcTmplUserCreationOrigin | 1.3.6.1.4.1.6527.3.1.2.4.2.96.1.1 | INTEGER | read-only | The value svcTmplUserCreationOrigin indicates how the service was created using this specific service template. |
| TMN svcTmplUserCreatorSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.96.1.2 | TmnxServId | read-only | The value svcTmplUserCreatorSvcId indicates the service identifier which created this particular service using this template. A value of zero indicates that the service is not created by another service. |
| svcTmplUserEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.96.1 | not-accessible | This table provides information about services created using a service template. Entries are created and deleted by the system. | |
| svcTmplUserTable | 1.3.6.1.4.1.6527.3.1.2.4.2.96 | not-accessible | A table that contains services which are created using Service templates. | |
| U32 svcTotalFdbMimDestIdxEntries | 1.3.6.1.4.1.6527.3.1.2.4.2.42 | Unsigned32 | read-only | The value of the object svcTotalFdbMimDestIdxEntries indicates the number of system wide Backbone MAC address indices in use. |
| svcTraps | 1.3.6.1.4.1.6527.3.1.3.4.2.0 | |||
| svcTrapsPrefix | 1.3.6.1.4.1.6527.3.1.3.4.2 | |||
| SER svcType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.3 | ServType | read-create | The value of the object svcType specifies the service type: e.g. epipe, tls, etc. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| T/F svcVcSwitching | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.23 | TruthValue | read-create | The value of the object svcVcSwitching specifies if the PW switching signalling is used for the Spokes configured under the service. This object can only be specified when the row is created. |
| svcVllBgpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.122.1 | not-accessible | The svcVllBgpEntry contains BGP related information for a specific service. | |
| TNA svcVllBgpExportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.122.1.4 | TNamedItemOrEmpty | read-create | The value of svcVllBgpExportRteTarget specifies the extended community name for the default export policy to use for BGP in this VLL service. This object cannot be set to a non-empty if svcVllBgpExportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. |
| TNA svcVllBgpImportRteTarget | 1.3.6.1.4.1.6527.3.1.2.4.2.122.1.5 | TNamedItemOrEmpty | read-create | The value of svcVllBgpImportRteTarget specifies the extended community name for the default import policy to use for BGP in this VLL service. This object cannot be set to a non-empty if svcVllBgpImportRteTarget has a non-empty value, otherwise an 'inconsistentValue' error will be returned. |
| TIM svcVllBgpLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.122.1.2 | TimeStamp | read-only | The value of svcVllBgpLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| ROW svcVllBgpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.122.1.1 | RowStatus | read-create | The value of svcVllBgpRowStatus is used for the creation and deletion of Shortest Path Bridging context in a VPLS service. |
| svcVllBgpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.122 | not-accessible | The svcVllBgpTable contains entries for BGP in a VLL service context. | |
| TIM svcVllBgpTableLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.121 | TimeStamp | read-only | The value of svcVllBgpTableLastChanged indicates the sysUpTime at the time of the last modification of svcVllBgpTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| TMN svcVllBgpVsiRD | 1.3.6.1.4.1.6527.3.1.2.4.2.122.1.3 | TmnxVPNRouteDistinguisher | read-create | The value of svcVllBgpVsiRD specifies the high-order 6 bytes used to compose the Virtual Switch Instance identifier (VSI-id) to use for NLRI in BGP in this VLL service. |
| NTF svcVllSiteDesigFwdrChg | 1.3.6.1.4.1.6527.3.1.3.4.2.0.41 | [CAUSE] The svcVllSiteDesigFwdrChg notification is generated when there is a change in the 'designated forwarder' status for the site. [EFFECT] The new designated forwarder will be used to forward traffic. [RECOVERY] None needed. | ||
| TMN svcVllSiteIdAdminStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.4 | TmnxEnabledDisabled | read-create | The value of svcVllSiteIdAdminStatus specifies the administrative state of the site instance associated with this service. |
| I32 svcVllSiteIdBootTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.10 | Integer32 | read-create | The value of svcVllSiteIdBootTimer specifies how long the system waits after a node reboot before running the DF (designated- forwarder) election algorithm. When this object is set to default value, system uses value of TIMETRA-MC-REDUNDANCY-MIB::tmnxMcRedBgpMultiHomeBootTimer object. |
| T/F svcVllSiteIdDesignatedFwdr | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.9 | TruthValue | read-only | The value of the svcVllSiteIdDesignatedFwdr indicates whether this site has been declared as 'designated-forwarder' depending on the result of the BGP election. |
| U32 svcVllSiteIdDfChgCnt | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.13 | Unsigned32 | read-only | The value of svcVllSiteIdDfChgCnt indicates the number of times designated forwarder has changed. |
| U32 svcVllSiteIdDfUpTime | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.12 | Unsigned32 | read-only | The value of svcVllSiteIdDfUpTime indicates the uptime of the designated forwarder for this site. |
| TMN svcVllSiteIdEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.7 | TmnxEncapVal | read-create | The value of svcVllSiteIdEncapValue specifies the encap-value of the port associated with this site. An 'inconsistentValue' error is returned when svcVllSiteIdPortId is set to non-default and svcVllSiteIdEncapValue is set to its default value or when svcVllSiteIdPortId is set to its default value and svcVllSiteIdEncapValue is set to non-default value. |
| svcVllSiteIdEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1 | not-accessible | The svcVllSiteIdEntry contains information about a particular site in a specific service. | |
| TIM svcVllSiteIdLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.3 | TimeStamp | read-only | The value of svcVllSiteIdLastChanged indicates the timestamp of last change to this row in svcVllSiteIdTable. |
| TNA svcVllSiteIdName | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.1 | TNamedItem | not-accessible | The value of svcVllSiteIdName defines the name for the specific site. |
| TSI svcVllSiteIdOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.8 | TSiteOperStatus | read-only | The value of the svcVllSiteIdOperStatus indicates the operational status of the site. |
| TMN svcVllSiteIdPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.6 | TmnxPortID | read-create | The value of svcVllSiteIdPortId specifies the port associated with this site. The default value for this object indicates an invalid port. An 'inconsistentValue' error is returned when svcVllSiteIdPortId is set to non-default and svcVllSiteIdEncapValue is set to its default value or when svcVllSiteIdPortId is set to its default value and svcVllSiteIdEncapValue is set to non-default value. |
| ROW svcVllSiteIdRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.2 | RowStatus | read-create | The value of svcVllSiteIdRowStatus is used for the creation and deletion of rows in this table. |
| I32 svcVllSiteIdSiteActTimer | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.11 | Integer32 | read-create | The value of svcVllSiteIdSiteActTimer specifies the time-period the system keeps the local sites in standby status, waiting for BGP updates from remote PEs before running the DF (designated-forwarder) election algorithm to decide whether the site should be unblocked. When this object is set to default value, system uses value of TIMETRA-MC-REDUNDANCY-MIB::tmnxMcRedBgpMultiHomeSiteTimer object. |
| TMN svcVllSiteIdSiteId | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.5 | TmnxSiteId | read-create | The value of svcVllSiteIdSiteId specifies the identifier for the site in this service. |
| svcVllSiteIdTable | 1.3.6.1.4.1.6527.3.1.2.4.2.124 | not-accessible | This table maintains the information about different sites defined in a service. | |
| TIM svcVllSiteIdTblLastChanged | 1.3.6.1.4.1.6527.3.1.2.4.2.123 | TimeStamp | read-only | The value of svcVllSiteIdTblLastChanged indicates the sysUpTime at the time of the last modification of svcVllSiteIdTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value. |
| U32 svcVllSiteIdTimerRemain | 1.3.6.1.4.1.6527.3.1.2.4.2.124.1.14 | Unsigned32 | read-only | The value of svcVllSiteIdTimerRemain indicates remaining time in the timer for this site. |
| INT svcVllType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.18 | INTEGER | read-create | The value of the object svcVllType specifies, for a apipe, fpipe or cpipe service, the type of pseudo-wire to be signalled for the service. The default for this object depends on the service type: 'atmSdu' for apipes, 'frDlci' for fpipes, satopE1 for cpipes, and 'undef' for all other service types. |
| INT svcVplsType | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.26 | INTEGER | read-create | Backbone VPLS ('bVpls') refers to the B-Component instance of the Provider Backbone Bridging (PBB/IEEE 802.1ah) feature. It represents the Multi-point tunneling component that multiplexes multiple Customer VPNs (ISIDs) together. It is similar to a regular VPLS instance that operates on the Backbone MAC addresses. ISID VPLS ('iVpls') or I-VPLS refers to the I-Component instance of the Provider Backbone Bridging (PBB/IEEE 802.1ah) feature. It identifies the specific VPN entity associated to a customer Multipoint (ELAN) service. It is similar to a regular VPLS instance that operates on the Customer MAC addresses. The value of the object svcVplsType specifies the VPLS service type. The value of this object must be specified when the row is created and cannot be changed while the svcRowStatus is 'active'. |
| VPN svcVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.14 | VpnId | read-create | The value of the object svcVpnId specifies the VPN ID assigned to this service. The value of this object can be specified only when the row is created. If the value is not specified, it defaults to the service ID. |
| TMN svcVRouterId | 1.3.6.1.4.1.6527.3.1.2.4.2.2.1.15 | TmnxVRtrIDOrZero | read-create | The value of the object svcVRouterId specifies, for a IES or VPRN service the associated virtual router instance where its interfaces are defined. This object has a special significance for the VPRN service as it can be used to associate the service to a specific virtual router instance. If no routing instance is specified or a value of zero (0) is specified, the agent will assign the vRtrID index value that would have been returned by the vRtrNextVRtrID object in the TIMETRA-VRTR-MIB. The agent supports an SNMP SET operation to the svcVRouterId object only during row creation. |
| TMN svcWholesalerID | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.1 | TmnxServId | not-accessible | The value of svcWholesalerID is used to specify the service ID of the wholesaler. |
| svcWholesalerInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1 | not-accessible | Each row entry represents the attributes of a wholesaler-retailer pairing. Entries are created/destroyed when forwarding interfaces are defined. | |
| svcWholesalerInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.24 | not-accessible | The svcWholesalerInfoTable has an entry for each wholesaler service associated with a retailer service on this system. | |
| U32 svcWholesalerNumArpHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.6 | Unsigned32 | read-only | The value of svcWholesalerNumArpHosts indicates the number of ARP hosts in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| U32 svcWholesalerNumDhcpLeaseStates | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.4 | Unsigned32 | read-only | The value of svcWholesalerNumDhcpLeaseStates indicates the number of DHCP lease states in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| U32 svcWholesalerNumDynamicHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.3 | Unsigned32 | read-only | The value of svcWholesalerNumDynamicHosts indicates the number of dynamic hosts in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| U32 svcWholesalerNumPppoeSessions | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.5 | Unsigned32 | read-only | The value of svcWholesalerNumPppoeSessions indicates the number of PPPoE sessions in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| U32 svcWholesalerNumStaticHosts | 1.3.6.1.4.1.6527.3.1.2.4.2.24.1.2 | Unsigned32 | read-only | The value of svcWholesalerNumStaticHosts indicates the number of static hosts in the wholesaler indicated by svcWholesalerID that belong to subnets of the retailer service. |
| timetraServicesMIBModule | 1.3.6.1.4.1.6527.1.1.3.4 | This document is the SNMP MIB module to manage and provision the various services of the Alcatel-Lucent SROS system. Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. | ||
| I32 tlsDHCPClientLease | 1.3.6.1.4.1.6527.3.1.2.4.6.6 | Integer32 | accessible-for-notify | The value of the object tlsDHCPClientLease indicates the lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time. This object was made obsolete in the 4.0 release. |
| MAC tlsDhcpLseStateNewChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.10 | MacAddress | accessible-for-notify | The value of the object tlsDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap. This object was made obsolete in the 4.0 release. |
| IP tlsDhcpLseStateNewCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.9 | IpAddress | accessible-for-notify | The value of the object tlsDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap. This object was made obsolete in the 4.0 release. |
| MAC tlsDhcpLseStateOldChAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.8 | MacAddress | accessible-for-notify | The value of the object tlsDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state. Used in sapTlsDHCPLeaseStateOverride trap. This object was made obsolete in the 4.0 release. |
| IP tlsDhcpLseStateOldCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.7 | IpAddress | accessible-for-notify | The value of the object tlsDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state. Used in sapTlsDHCPLeaseStateOverride trap. This object was made obsolete in the 4.0 release. |
| STR tlsDhcpLseStatePopulateError | 1.3.6.1.4.1.6527.3.1.2.4.6.17 | DisplayString | accessible-for-notify | The value of the object tlsDhcpLseStatePopulateError indicates why the system was unable to update the Lease State Table upon reception of a DHCP ACK message. This object was made obsolete in the 4.0 release. |
| STR tlsDhcpPacketProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.16 | DisplayString | accessible-for-notify | The value of the object tlsDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system. This object was made obsolete in the 4.0 release. |
| IP tlsDhcpRestoreLseStateCiAddr | 1.3.6.1.4.1.6527.3.1.2.4.6.11 | IpAddress | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| TMN tlsDhcpRestoreLseStateEncapVal | 1.3.6.1.4.1.6527.3.1.2.4.6.14 | TmnxEncapVal | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateEncapVal indicates the SAP encap value specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| TMN tlsDhcpRestoreLseStatePortId | 1.3.6.1.4.1.6527.3.1.2.4.6.13 | TmnxPortID | accessible-for-notify | The value of the object tlsDhcpRestoreLseStatePortId indicates the Port ID specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| STR tlsDhcpRestoreLseStateProblem | 1.3.6.1.4.1.6527.3.1.2.4.6.15 | DisplayString | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateProblem indicates why the persistency record cannot be restored. This object was made obsolete in the 4.0 release. |
| TMN tlsDhcpRestoreLseStateSvcId | 1.3.6.1.4.1.6527.3.1.2.4.6.12 | TmnxServId | accessible-for-notify | The value of the object tlsDhcpRestoreLseStateSvcId indicates the serviceId specified in the persistency record causing the trap. This object was made obsolete in the 4.0 release. |
| tlsEgressMulticastGroupEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1 | not-accessible | An entry containing management information applicable to a particular VPLS Egress Multicast Group. | |
| tlsEgressMulticastGroupTable | 1.3.6.1.4.1.6527.3.1.2.4.2.14 | not-accessible | This table is used to manage VPLS Egress Multicast Groups. These groups are used to group together VPLS SAP's in order to improve the efficiency of the egress multicast replication process. | |
| U32 tlsEgrMcGrpAdminQinqFixedTagVal | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.13 | Unsigned32 | read-create | The value of tlsEgrMcGrpAdminQinqFixedTagVal specifies the provisioned common value of the fixed 802.1Q tag of all the 'QinQ' SAP's in this Egress Multicast Group. The value 0 is used to indicate that the actual value of the fixed tag will be defined implicitly by the corresponding tag of the first SAP added to this Egress Multicast Group. |
| U32 tlsEgrMcGrpChainLimit | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.5 | Unsigned32 | read-create | The value of tlsEgrMcGrpChainLimit specifies the maximum number of SAP's that can be placed together in a single chain on this Egress Multicast Group. |
| SER tlsEgrMcGrpDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.4 | ServObjDesc | read-create | Generic information about this Egress Multicast Group. |
| U32 tlsEgrMcGrpDot1qEtherType | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.7 | Unsigned32 | read-create | The value of tlsEgrMcGrpDot1qEtherType specifies the common ethertype value used by all the 802.1Q SAP's on this Egress Multicast Group. |
| INT tlsEgrMcGrpEncapType | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.6 | INTEGER | read-create | The value of tlsEgrMcGrpEncapType specifies the common service encapsulation type used by all the SAP's on this Egress Multicast Group. |
| TFI tlsEgrMcGrpIpFilterId | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.9 | TFilterID | read-create | The value of tlsEgrMcGrpIpFilterId specifies the common egress IP filter ID used by all the SAP's on this Egress Multicast Group. |
| TFI tlsEgrMcGrpIpv6FilterId | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.10 | TFilterID | read-create | The value of tlsEgrMcGrpIpv6FilterId specifies the common egress IPv6 filter ID used by all the SAP's on this Egress Multicast Group. |
| TIM tlsEgrMcGrpLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.3 | TimeStamp | read-only | The value of tlsEgrMcGrpLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| TFI tlsEgrMcGrpMacFilterId | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.8 | TFilterID | read-create | The value of tlsEgrMcGrpMacFilterId specifies the common egress MAC filter ID used by all the SAP's on this Egress Multicast Group. |
| TNA tlsEgrMcGrpName | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.1 | TNamedItem | not-accessible | The value of tlsEgrMcGrpName indicates the name of the Egress Multicast Group. |
| U32 tlsEgrMcGrpOperQinqFixedTagVal | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.14 | Unsigned32 | read-only | The value of tlsEgrMcGrpOperQinqFixedTagVal specifies the operating common value of the fixed 802.1Q tag of all the 'QinQ' SAP's in this Egress Multicast Group. |
| U32 tlsEgrMcGrpQinqEtherType | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.11 | Unsigned32 | read-create | The value of tlsEgrMcGrpQinqEtherType specifies the common ethertype value used by all the 'QinQ' SAP's in this Egress Multicast Group. |
| INT tlsEgrMcGrpQinqFixedTagPosition | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.12 | INTEGER | read-create | The value of tlsEgrMcGrpQinqFixedTagPosition specifies the common position of the fixed 802.1Q tag of all the 'QinQ' SAP's in this Egress Multicast Group. This object has no meaning when the value of tlsEgrMcGrpEncapType is not 'qinqEncap'. |
| ROW tlsEgrMcGrpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.14.1.2 | RowStatus | read-create | The value of tlsEgrMcGrpRowStatus controls the creation and deletion of rows in this table. |
| MAC tlsFdbBackboneDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.13 | MacAddress | read-only | The value of the object tlsFdbBackboneDstMac indicates the Backbone VPLS service MAC address used as destination MAC address in the Provider Backbone Bridging frames for this tlsFdbMacAddr. This object is insignificant for services with svcVplsType not set to 'iVpls' and should contain a value of 0:0:0:0:0:0. |
| TMN tlsFdbCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.10 | TmnxCustId | read-only | The value of the object tlsFdbCustId indicates the Customer ID of the associated TLS. |
| TMN tlsFdbEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.6 | TmnxEncapVal | read-create | The value of the object tlsFdbEncapValue specifies, when the value of tlsFdbLocale is 'sap', along with tlsFdbPortId, SAP associated with the MAC address defined by tlsFdbMacAddr. This object is otherwise insignificant and should contain a value of 0. |
| TNA tlsFdbEndPointName | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.15 | TNamedItemOrEmpty | read-create | The value of tlsFdbEndPointName specifies the name of the service endpoint associated with the MAC Address. |
| SDP tlsFdbEPMacOperSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.16 | SdpId | read-only | The value of the object tlsFdbEPMacOperSdpId along with tlsFdbEPMacOperVcId indicates the SDP binding associated with this static MAC address for this endpoint. This object is valid when tlsFdbLocale is 'endpoint', otherwise it should contain a value of 0. |
| U32 tlsFdbEPMacOperVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.17 | Unsigned32 | read-only | The value of the object tlsFdbEPMacOperVcId along with tlsFdbEPMacOperSdpId indicates the SDP binding associated with this static MAC address for this endpoint. This object is valid when tlsFdbLocale is 'endpoint', otherwise it should contain a value of 0. |
| tlsFdbInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1 | not-accessible | Information about a specific TLS FDB. | |
| tlsFdbInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.4 | not-accessible | A table that contains TLS FDB information. | |
| TIM tlsFdbLastStateChange | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.11 | TimeStamp | read-only | The value of the object tlsFdbLastStateChange indicates the value of sysUpTime at the time of the most recent state change of this entry. A state change is defined as a change in the value of: tlsFdbRowStatus, tlsFdbType, tlsFdbLocale, tlsFdbPortId, tlsFdbEncapValue, tlsFdbSdpId or tlsFdbVcId. |
| INT tlsFdbLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.4 | INTEGER | read-create | The value of the object tlsFdbLocale specifies for TLS FDB entries defined on a local SAP the value 'sap', remote entries defined on an SDP have the value 'sdp', entries associated with the Control Processor have the value 'cpm' and entries associated with the explicit endpoint have the value 'endpoint'. The value of this object must be specified when the row is created and cannot be changed while the row status is 'active'. |
| MAC tlsFdbMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.1 | MacAddress | read-only | The value of the object tlsFdbMacAddr specifies the 48-bit IEEE 802.3 MAC address. |
| U32 tlsFdbNumIVplsMac | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.14 | Unsigned32 | read-only | The value of the object tlsFdbNumIVplsMac indicates the number of ISID VPLS service MAC addressess which are using this Backbone MAC address defined by tlsFdbMacAddr. This object is insignificant for services with svcVplsType not set to 'bVpls' and should contain a value of 0. |
| U32 tlsFdbPbbNumEpipes | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.18 | Unsigned32 | read-only | The value of the object tlsFdbPbbNumEpipes indicates number of E-Pipes that resolve to this MAC Address. This object is valid for service with svcVplsType set to 'bVpls', otherwise it should contain a value of 0. |
| TMN tlsFdbPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.5 | TmnxPortID | read-create | When the value of tlsFdbLocale is 'sap', this object, along with tlsFdbEncapValue, specifies the SAP associated with the MAC address defined by tlsFdbMacAddr. This object is otherwise insignificant and should contain a value of 0. |
| T/F tlsFdbProtected | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.12 | TruthValue | read-only | The value of the object tlsFdbProtected indicates whether or not this MAC is protected. When the value of this object is 'true' the agent will protect the MAC from being learned or re-learned on a SAP that has restricted learning enabled. |
| ROW tlsFdbRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.2 | RowStatus | read-create | The value of the object tlsFdbRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. |
| SDP tlsFdbSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.7 | SdpId | read-create | The value of the object tlsFdbSdpId specifies, when the value of tlsFdbLocale is 'sdp', along with tlsFdbVcId,the SDP Binding associated with the MAC address defined by tlsFdbMacAddr. This object is other- wise insignificant and should contain a value of 0. |
| INT tlsFdbType | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.3 | INTEGER | read-create | The value of the object tlsFdbType specifies: - 'static': Static TLS FDB entries created via management - 'learned': dynamic entries created via the learning process - 'oam': entries created via the OAM process - 'dhcp': learned addresses can be temporarily frozen by the DHCP snooping application for the duration of a DHCP lease - 'host': entry added by the system for a static configured subscriber host - 'intf': entry added by routed vpls - 'spb' : entry added by shortest-path bridging |
| U32 tlsFdbVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.8 | Unsigned32 | read-create | The value of the object tlsFdbVcId specifies, when the value of tlsFdbLocale is 'sdp', along with tlsFdbSdpId, the SDP Binding associated with the MAC address defined by tlsFdbMacAddr. This object is other-wise insignificant and should contain a value of 0. |
| VPN tlsFdbVpnId | 1.3.6.1.4.1.6527.3.1.2.4.2.4.1.9 | VpnId | read-only | The value of the object tlsFdbVpnId indicates the VPN ID of the associated TLS. |
| TMN tlsMFibEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.9 | TmnxEncapVal | not-accessible | The value of tlsMFibEncapValue indicates, together with the object tlsMFibPortId, the SAP for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sap'. Otherwise it contains the value 0. |
| tlsMFibEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1 | not-accessible | An entry in the tlsMFibTable. Each entry indicates whether traffic from a certain source to a certain multicast destination (group) needs to be forwarded or blocked on the indicated SAP/SDP. | |
| INT tlsMFibEntryType | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.1 | INTEGER | not-accessible | The value of the object tlsMFibEntryType indicates the type of this tlsMFibEntry. - macBased: entry used for macBased multicast, as for MLD-snooping and 802.1ak MMRP. - ipBased: entry used for ip_based multicast, as for IGMP-snooping and PIM-snooping. |
| MFI tlsMFibFwdOrBlk | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.12 | MfibGrpSrcFwdOrBlk | read-only | The value of tlsMFibFwdOrBlk indicates if traffic for the indicated (S,G) pair will be blocked or forwarded on the indicated SAP or SDP. |
| IP tlsMFibGrpInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.4 | InetAddress | not-accessible | The value of the object tlsMFibGrpInetAddr indicates the multicast destination IP address for which this table entry contains information. |
| IPt tlsMFibGrpInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.3 | InetAddressType | not-accessible | The value of the object tlsMFibGrpInetAddrType indicates the type of tlsMFibGrpInetAddr. |
| MAC tlsMFibGrpMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.2 | MacAddress | not-accessible | The value of the object tlsMFibGrpMacAddr indicates the MAC address for which this table entry contains information. This value is only meaningful if the value of tlsMFibEntryType is 'macBased (2)'. |
| tlsMFibGrpSrcStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1 | not-accessible | An entry in the tlsMFibGrpSrcStatsTable. | |
| C64 tlsMFibGrpSrcStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.4 | Counter64 | read-only | tlsMFibGrpSrcStatsForwardedOctets indicates the number of octets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| C64 tlsMFibGrpSrcStatsForwardedPkts | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.3 | Counter64 | read-only | tlsMFibGrpSrcStatsForwardedPkts indicates the number of IPv4 multicast packets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| IP tlsMFibGrpSrcStatsGrpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.1 | IpAddress | not-accessible | tlsMFibGrpSrcStatsGrpAddr indicates the IPv4 multicast destination address for which this table entry contains information. |
| IP tlsMFibGrpSrcStatsSrcAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.9.1.2 | IpAddress | not-accessible | tlsMFibGrpSrcStatsSrcAddr indicates the IPv4 unicast source address for which this table entry contains information. |
| tlsMFibGrpSrcStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.9 | not-accessible | tlsMFibGrpSrcStatsTable contains statistics for the entries in the IPv4 Multicast FIB for this Tls. These statistics are collected by the forwarding engine. This table was made obsolete in the 6.0 release. It is replaced by tlsMFibStatsTable. | |
| TMN tlsMFibInfoEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.5 | TmnxEncapVal | not-accessible | When the value of tlsMFibInfoLocale is 'sap', the object tlsMFibInfoEncapValue, along with the object tlsMFibInfoPortId, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| tlsMFibInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1 | not-accessible | An entry in the tlsMFibInfoTable. Each entry indicates whether traffic from a certain source to a certain multicast destination (group) needs to be forwarded or blocked on the indicated SAP/SDP. | |
| MFI tlsMFibInfoFwdOrBlk | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.8 | MfibGrpSrcFwdOrBlk | read-only | tlsMFibInfoFwdOrBlk indicates if traffic for the indicated (S,G) pair will be blocked or forwarded on the indicated SAP or SDP. |
| IP tlsMFibInfoGrpAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.1 | IpAddress | not-accessible | The value of the object tlsMFibInfoGrpAddr indicates the IPv4 multicast destination address for which this table entry contains information. |
| MFI tlsMFibInfoLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.3 | MfibLocation | not-accessible | tlsMFibInfoLocale indicates if the information in this entry pertains to a 'sap' or to an 'sdp'. |
| TMN tlsMFibInfoPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.4 | TmnxPortID | not-accessible | When the value of tlsMFibInfoLocale is 'sap', the object tlsMFibInfoPortId along with the object tlsMFibInfoEncapValue, indicates the SAP for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| SDP tlsMFibInfoSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.6 | SdpId | not-accessible | When the value of tlsMFibInfoLocale is 'sdp', the object tlsMFibInfoSdpId, along with tlsMFibInfoVcId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| IP tlsMFibInfoSrcAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.2 | IpAddress | not-accessible | tlsMFibInfoSrcAddr indicates the IPv4 unicast source address for which this table entry contains information. |
| TMN tlsMFibInfoSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.9 | TmnxServId | read-only | tlsMFibInfoSvcId indicates the TLS service to which the indicated SAP or SDP belongs. |
| tlsMFibInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.8 | not-accessible | tlsMFibInfoTable contains the IPv4 Multicast FIB for this Tls. This table was made obsolete in the 6.0 release. It is replaced by tlsMFibTable. | |
| U32 tlsMFibInfoVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.8.1.7 | Unsigned32 | not-accessible | When the value of tlsMFibInfoLocale is 'sdp', the object tlsMFibInfoVcId, along with tlsMFibInfoSdpId, indicates the SDP Binding for which this entry contains information. This object is otherwise insignificant and contains the value 0. |
| MFI tlsMFibLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.7 | MfibLocation | not-accessible | The value of tlsMFibLocale indicates if the information in this entry pertains to a 'sap' or to an 'sdp'. |
| TMN tlsMFibPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.8 | TmnxPortID | not-accessible | The value of tlsMFibPortId indicates, together with the object tlsMFibEncapValue, the SAP for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sap'. Otherwise it contains the value 0. |
| SDP tlsMFibSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.10 | SdpId | not-accessible | The value of tlsMFibSdpId indicates, together with the object tlsMFibVcId, the SDP Binding for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sdp'. Otherwise it contains the value 0. |
| IP tlsMFibSrcInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.6 | InetAddress | not-accessible | The value of tlsMFibSrcInetAddr indicates the unicast source IP address for which this table entry contains information. |
| IPt tlsMFibSrcInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.5 | InetAddressType | not-accessible | The value of tlsMFibSrcInetAddrType indicates the type of tlsMFibSrcInetAddr. |
| tlsMFibStatsEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1 | not-accessible | An entry in the tlsMFibStatsTable. | |
| INT tlsMFibStatsEntryType | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.1 | INTEGER | not-accessible | The value of the object tlsMFibStatsEntryType indicates the type of this tlsMFibStatsEntry. - macBased: entry used for macBased multicast, as for MLD-snooping and 802.1ak MMRP. - ipBased: entry used for ip_based multicast, as for IGMP-snooping and PIM-snooping. |
| C64 tlsMFibStatsForwardedOctets | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.8 | Counter64 | read-only | The value of tlsMFibStatsForwardedOctets indicates the number of octets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| C64 tlsMFibStatsForwardedPkts | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.7 | Counter64 | read-only | The value of tlsMFibStatsForwardedPkts indicates the number of multicast packets that were forwarded to the SAPs and SDPs listed in the tlsMFibInfoTable. |
| IP tlsMFibStatsGrpInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.4 | InetAddress | not-accessible | The value of tlsMFibStatsGrpInetAddr indicates the multicast destination IP address for which this table entry contains information. |
| IPt tlsMFibStatsGrpInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.3 | InetAddressType | not-accessible | The value of tlsMFibStatsGrpInetAddrType indicates the type of tlsMFibStatsGrpInetAddr. |
| MAC tlsMFibStatsGrpMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.2 | MacAddress | not-accessible | The value of tlsMFibStatsGrpMacAddr indicates the MAC address for which this table entry contains information. This value is only meaningful if the value of tlsMFibStatsEntryType is 'macBased (2)'. |
| IP tlsMFibStatsSrcInetAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.6 | InetAddress | not-accessible | The value of tlsMFibStatsSrcInetAddr indicates the unicast source IP address for which this table entry contains information. |
| IPt tlsMFibStatsSrcInetAddrType | 1.3.6.1.4.1.6527.3.1.2.4.2.29.1.5 | InetAddressType | not-accessible | The value of tlsMFibStatsSrcInetAddrType indicates the type of tlsMFibStatsSrcInetAddr. |
| tlsMFibStatsTable | 1.3.6.1.4.1.6527.3.1.2.4.2.29 | not-accessible | tlsMFibStatsTable contains statistics for the entries in the IPv4 Multicast FIB for this Tls. These statistics are collected by the forwarding engine. | |
| TMN tlsMFibSvcId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.13 | TmnxServId | read-only | The value of tlsMFibSvcId indicates the TLS service to which the indicated SAP or SDP belongs. |
| tlsMFibTable | 1.3.6.1.4.1.6527.3.1.2.4.2.28 | not-accessible | tlsMFibTable contains the Multicast FIB for this Tls. | |
| U32 tlsMFibVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.28.1.11 | Unsigned32 | not-accessible | The value of tlsMFibVcId indicates, together with the object tlsMFibSdpId, the SDP Binding for which this entry contains information. This value of this object is only meaningful when the value of tlsMFibLocale is 'sdp'. Otherwise it contains the value 0. |
| tlsMstiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1 | not-accessible | Information about a specific MSTI. | |
| MST tlsMstiInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.1 | MstiInstanceId | not-accessible | The value of the object tlsMstiInstanceId specifies the Multiple Spanning Tree Instance. |
| I32 tlsMstiIntRootCost | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.6 | Integer32 | read-only | The value of the object tlsMstiIntRootCost indicates the cost of the path to the regional root bridge as seen from this bridge. |
| TIM tlsMstiLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.4 | TimeStamp | read-only | The value of the object tlsMstiLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this MSTI. |
| tlsMstiManagedVlanListEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1 | not-accessible | Each row specifies a range of VLANS associated with a SAP of a MVPLS. Ranges may contains overlapping sections only for Mvpls SAPs that belong to the same service. | |
| tlsMstiManagedVlanListTable | 1.3.6.1.4.1.6527.3.1.2.4.2.13 | not-accessible | This table is used only for a management VPLS when MSTP is running. It indicates for each multiple spanning tree instance the ranges of associated VLANs that will be affected when a certain SAP changes state. | |
| QTA tlsMstiMvplsMaxVlanTag | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1.2 | QTag | not-accessible | The value of tlsMstiMvplsMaxVlanTag specifies the right bound (i.e. max. value) of a range of VLANs that are associated with the Mvpls SAP. |
| QTA tlsMstiMvplsMinVlanTag | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1.1 | QTag | not-accessible | The value of tlsMstiMvplsMinVlanTag specifies the left bound (i.e. min. value) of a range of VLANs that are associated with the Mvpls SAP. tlsMstiMvplsMinVlanTag must be smaller than (or equal to) tlsMstiMvplsMaxVlanTag. |
| ROW tlsMstiMvplsRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.13.1.3 | RowStatus | read-create | The value of tlsMstiMvplsRowStatus specifies the status of this row. The only values supported during a set operation are 'active', 'createAndGo' and 'destroy'. |
| I32 tlsMstiPriority | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.3 | Integer32 | read-create | The value of the object tlsMstiPriority specifies the priority of this spcecific Multiple Spanning Tree Instance for this service. It is used as the highest 4 bits of the Bridge ID included in the MSTP BPDU's generated by this bridge. The tlsMstiPriority can only take-on values which multiples of 4096 (4k). If a value is specified which is not a multiple of 4K, then this value will be replaced by the closest multiple of 4K which is lower then the value entered. |
| BRI tlsMstiRegionalRoot | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.5 | BridgeId | read-only | The value of the object tlsMstiRegionalRoot indicates the bridge identifier of the regional root of the MSTI spanning tree as determined by the Spanning Tree Protocol instance associated with this service. This value is used as the CIST Regional Root Identifier parameter in all MSTP BPDUs originated by this node. |
| I32 tlsMstiRegionalRootPort | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.8 | Integer32 | read-only | The value of the object tlsMstiRegionalRootPort indicates the port number of the port which offers the lowest cost path from this bridge to the regional root bridge. |
| I32 tlsMstiRemainingHopCount | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.7 | Integer32 | read-only | The value of the object tlsMstiRemainingHopCount specifies the remaining number of hops. |
| ROW tlsMstiRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.12.1.2 | RowStatus | read-create | The value of the object tlsMstiRowStatus specifies the status of this row. The only values supported during a set operation are 'active', 'createAndGo' and 'destroy'. |
| tlsMstiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.12 | not-accessible | A table that contains Multiple Spanning Tree Instance (MSTI) information. Each management VPLS running MSTP can have upto 15 MSTI, not including the CIST. | |
| tlsPipInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1 | not-accessible | TLS specific information about PIP uplink. | |
| tlsPipInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.40 | not-accessible | A table that contains TLS PIP (Provider Internal Port) uplink information. PIP is the virtual link between I and B components of PBB (Provider Backbone Bridging) model. I component refers to a service with svcVplsType set to 'iVpls (3)' and B component refers to a service with svcVplsType set to 'bVpls (2)'. When any form of STP is enabled in the iVpls domain, the PIP uplink is modeled as a regular STP port. | |
| C32 tlsPipInTcBitBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.21 | Counter32 | read-only | The value of the object tlsPipInTcBitBpdus indicates the number of BPDUs received on this PIP uplink with the Topology Change bit set. |
| BRI tlsPipMstiDesignatedBridge | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.3 | BridgeId | read-only | The value of the object tlsPipMstiDesignatedBridge indicates the Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment for this MSTI. |
| I32 tlsPipMstiDesignatedPort | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.4 | Integer32 | read-only | The value of the object tlsPipMstiDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment for this MSTI. |
| tlsPipMstiEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1 | not-accessible | Information about a specific MSTI for a PIP uplink. | |
| STP tlsPipMstiPortRole | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.1 | StpPortRole | read-only | tlsPipMstiPortRole indicates the current role of the PIP uplink in the MSTI as defined by the Spanning Tree Protocol. |
| TST tlsPipMstiPortState | 1.3.6.1.4.1.6527.3.1.2.4.2.41.1.2 | TStpPortState | read-only | The value of the object tlsPipMstiPortState indicates the port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the broken(6) state. |
| tlsPipMstiTable | 1.3.6.1.4.1.6527.3.1.2.4.2.41 | not-accessible | This table contains Multiple Spanning Tree Instance information for the PIP uplink. Each management VPLS running MSTP can have upto 15 MSTI. An entry in this table is automatically created when a tlsMstiEntry is created. | |
| C32 tlsPipOutTcBitBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.22 | Counter32 | read-only | This object specifies the number of BPDUs sent out this PIP uplink with the Topology Change bit set. |
| BRI tlsPipStpDesignatedBridge | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.3 | BridgeId | read-only | The value of tlsPipStpDesignatedBridge indicates the Bridge Identifier of the bridge which this PIP uplink considers to be the Designated Bridge for this port's segment. |
| I32 tlsPipStpDesignatedPort | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.4 | Integer32 | read-only | The value of tlsPipStpDesignatedPort indicates the Port Identifier of the port on the Designated Bridge for this port's segment. |
| STP tlsPipStpException | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.5 | StpExceptionCondition | read-only | The value of the object tlsPipStpException indicates whether an STP exception condition is present on this Pip. - none : no exception condition found. - oneWayCommuniation : The neighbor RSTP peer on this link is not able to detect our presence. - downstreamLoopDetected :A loop is detected on this link. |
| C32 tlsPipStpForwardTransitions | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.6 | Counter32 | read-only | The value of the object tlsPipStpForwardTransitions indicates the number of times this port has transitioned from the Learning state to the Forwarding state. |
| C32 tlsPipStpInBadBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.11 | Counter32 | read-only | This object specifies the number of bad BPDUs received on this PIP uplink. |
| C32 tlsPipStpInConfigBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.7 | Counter32 | read-only | The value of the object tlsPipStpInConfigBpdus indicates the number of Configuration BPDUs received on this PIP uplink. |
| C32 tlsPipStpInMstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.10 | Counter32 | read-only | The value of the object tlsPipStpInMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs received on this PIP uplink. |
| C32 tlsPipStpInRstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.9 | Counter32 | read-only | The value of the object tlsPipStpInRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs received on this PIP uplink. |
| T/F tlsPipStpInsideRegion | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.20 | TruthValue | read-only | The value of the object tlsPipStpInsideRegion indicates whether the network connected to the PIP is in the same MST region. It corresponds to the parameter 'infoInternal' in 802.1Q. |
| C32 tlsPipStpInTcnBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.8 | Counter32 | read-only | The value of the object tlsPipStpInTcnBpdus indicates the number of Topology Change Notification BPDUs received on this PIP uplink. |
| MVP tlsPipStpMvplsPruneState | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.17 | MvplsPruneState | read-only | The value of tlsPipStpMvplsPruneState indicates the mVPLS prune state of this PIP uplink. The state reflects whether or not this uplink is pruned by the STP instance running in the mVPLS instance. |
| STP tlsPipStpOperProtocol | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.18 | StpProtocol | read-only | The value of tlsPipStpOperProtocol indicates whether 'stp', 'rstp' or 'mstp' is running on this PIP uplink. If the protocol is not enabled on this PIP uplink, the value 'notApplicable' is returned. |
| SER tlsPipStpOperStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.16 | ServiceOperStatus | read-only | The value of the object tlsPipStpOperStatus indicates the operational status of this PIP uplink. |
| C32 tlsPipStpOutConfigBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.12 | Counter32 | read-only | The value of the object tlsPipStpOutConfigBpdus indicates the number of Configuration BPDUs sent out this PIP uplink. |
| C32 tlsPipStpOutMstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.15 | Counter32 | read-only | The value of the object tlsPipStpOutMstBpdus indicates the number of Multiple Spanning Tree (MST) BPDUs sent out on this PIP uplink. |
| C32 tlsPipStpOutRstBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.14 | Counter32 | read-only | The value of the object tlsPipStpOutRstBpdus indicates the number of Rapid Spanning Tree (RST) BPDUs sent out on this PIP uplink. |
| C32 tlsPipStpOutTcnBpdus | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.13 | Counter32 | read-only | This object specifies the number of Topology Change Notification BPDUs sent out this PIP uplink. |
| U32 tlsPipStpPortNum | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.19 | Unsigned32 | read-only | The value of the object tlsPipStpPortNum specifies the value of the port number field which is contained in the least significant 12 bits of the 16-bit Port ID associated with this PIP uplink. |
| STP tlsPipStpPortRole | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.2 | StpPortRole | read-only | The value of tlsPipStpPortRole indicates the current role of the PIP uplink as defined by the Rapid Spanning Tree Protocol. |
| TST tlsPipStpPortState | 1.3.6.1.4.1.6527.3.1.2.4.2.40.1.1 | TStpPortState | read-only | The value of tlsPipStpPortState indicates the PIP uplink's current state as defined by application of the Spanning Tree Protocol. This state controls what action PIP uplink takes on reception of a frame. If the bridge has detected a port that is malfunctioning it will place that port into the 'broken (6)' state. |
| tlsProtectedMacEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1 | not-accessible | An entry containing management information applicable to a particular protected MAC address. | |
| tlsProtectedMacTable | 1.3.6.1.4.1.6527.3.1.2.4.2.17 | not-accessible | This table is used to manage protected MAC addresses within a VPLS's FDB. | |
| MAC tlsProtMacAddress | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1.1 | MacAddress | not-accessible | The value of tlsProtMacAddress indicates the address of the protected MAC. |
| C32 tlsProtMacImplCount | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1.6 | Counter32 | read-only | The value of the object tlsProtMacImplCount indicates how many times the protection of this MAC was activated at the indicated locale since the last re-initialization of the local network management subsystem, or the last time the system statistics were cleared. |
| TMN tlsProtMacImplEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1.4 | TmnxEncapVal | not-accessible | The value of the object tlsProtMacImplEncapValue indicates, when the value of tlsProtMacImplLocale is 'sap', along with tlsProtMacImplPortId, the SAP where this MAC address is protected. This object is otherwise insignificant and contains the value zero. |
| tlsProtMacImplEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1 | not-accessible | Each entry contains information about a specific implicitly protected MAC address. Rows are created or removed automatically by the system. | |
| INT tlsProtMacImplLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1.2 | INTEGER | not-accessible | The value of the object tlsProtMacImplLocale indicates where the protection of the MAC address defined by tlsProtMacImplMacAddr is applied: anywhere, or only on a specific SAP or SDP. |
| MAC tlsProtMacImplMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1.1 | MacAddress | not-accessible | The value of the object tlsProtMacImplMacAddr indicates the 48-bit IEEE 802.3 MAC address that is implicitly protected. |
| TMN tlsProtMacImplPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1.3 | TmnxPortID | not-accessible | When the value of tlsProtMacImplLocale is 'sap', this object, along with tlsProtMacImplEncapValue, indicates the SAP where this MAC address is protected. This object is otherwise insignificant and contains the value zero. |
| SDP tlsProtMacImplSdpBindId | 1.3.6.1.4.1.6527.3.1.2.4.2.61.1.5 | SdpBindId | not-accessible | The value of the object tlsProtMacImplSdpBindId indicates, when the value of tlsProtMacImplLocale is 'sdp', the SDP Binding where this MAC address is protected. This object is otherwise insignificant and contains the value zero. |
| tlsProtMacImplTable | 1.3.6.1.4.1.6527.3.1.2.4.2.61 | not-accessible | A table that contains information about implicitly protected MAC addresses in a VPLS service. | |
| TIM tlsProtMacLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1.3 | TimeStamp | read-only | The value of tlsProtMacLastMgmtChange indicates the value of sysUpTime at the time of the last management change of any writable object of this row. |
| ROW tlsProtMacRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.17.1.2 | RowStatus | read-create | The value of tlsProtMacRowStatus controls the creation and deletion of rows in this table. |
| SER tlsRdntGrpDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.3 | ServObjDesc | read-create | The value of the object tlsRdntGrpDescription specifies generic information about this redundant group. |
| tlsRdntGrpEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1 | not-accessible | Redundant Group information | |
| TIM tlsRdntGrpLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.4 | TimeStamp | read-only | The value of the object tlsRdntGrpLastMgmtChange indicates the sysUpTime at the time of the most recent management-initiated change to this redundant group. |
| TMN tlsRdntGrpMemberEncap | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.5 | TmnxEncapVal | not-accessible | When the value of tlsRdntGrpMemberIsSap is 'sap', the value of the object tlsRdntGrpMemberEncap, along with tlsRdntGrpMemberPort, specifies a SAP. This object is otherwise insignificant and should contain a value of 0. |
| tlsRdntGrpMemberEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1 | not-accessible | Redundant Group Member information. | |
| T/F tlsRdntGrpMemberIsSap | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.3 | TruthValue | not-accessible | The value of the object tlsRdntGrpMemberIsSap specifies whether the Port ID and Encap describe a sap or a port (in which case Encap has no meaning). |
| TIM tlsRdntGrpMemberLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.7 | TimeStamp | read-only | The value of the object tlsRdntGrpMemberLastMgmtChange indicates the time of the most recent management-initiated change to this redundant group member. |
| TMN tlsRdntGrpMemberPort | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.4 | TmnxPortID | not-accessible | When the value of tlsRdntGrpMemberIsSap is 'sap', the value of the object tlsRdntGrpMemberPort, along with tlsRdntGrpMemberEncap, specifies a SAP, otherwise a port (in which case tlsRdntGrpMemberEncap is insignificant). |
| IP tlsRdntGrpMemberRemoteNodeAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.2 | InetAddress | not-accessible | The value of the object tlsRdntGrpMemberRemoteNodeAddr specifies the ip address of the remote ldp peer. |
| IPt tlsRdntGrpMemberRemoteNodeAddrTp | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.1 | InetAddressType | not-accessible | The value of the object tlsRdntGrpMemberRemoteNodeAddrTp specifies the addresstype of the remote ldp peer. |
| ROW tlsRdntGrpMemberRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.11.1.6 | RowStatus | read-create | The value of the object tlsRdntGrpMemberRowStatus specifies the status of this row. The only values supported are 'active', 'createAndGo' and 'destroy'. |
| tlsRdntGrpMemberTable | 1.3.6.1.4.1.6527.3.1.2.4.2.11 | not-accessible | A table that holds information about the members of TLS redundant groups. | |
| TNA tlsRdntGrpName | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.1 | TNamedItem | not-accessible | The value of the object tlsRdntGrpName specifies the name of the redundant group. The name must be unique within a TLS, however the same name can appear in different TLS services, in which case they denote different redundant groups. |
| ROW tlsRdntGrpRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.10.1.2 | RowStatus | read-create | The value of the object tlsRdntGrpRowStatus specifies the status of this row. The only values supported are 'active', 'createAndGo' and 'destroy'. |
| tlsRdntGrpTable | 1.3.6.1.4.1.6527.3.1.2.4.2.10 | not-accessible | A table that contains TLS service Redundant Group information. There is no limit on the number of Redundant Groups that can be created globally or within a service. | |
| T/F tlsShgAutoLearnMacProtect | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.13 | TruthValue | read-create | The value of tlsShgAutoLearnMacProtect specifies whether to enable automatic population of the MAC protect list with source MAC addresses learned on the associated with this SHG. |
| L2R tlsShgCreationOrigin | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.11 | L2RouteOrigin | read-only | The value of tlsShgCreationOrigin indicates the protocol or mechanism which created this SHG. |
| TMN tlsShgCustId | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.3 | TmnxCustId | read-only | The value of the object tlsShgCustId indicates the Customer ID of the associated TLS service. |
| SER tlsShgDescription | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.5 | ServObjDesc | read-create | The value of the object tlsShgDescription specifies generic information about this split-horizon group. |
| tlsShgInfoEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1 | not-accessible | Split-horizon group information about a TLS service. | |
| tlsShgInfoTable | 1.3.6.1.4.1.6527.3.1.2.4.2.6 | not-accessible | A table that contains TLS service split-horizon group information. A maximum of 30 split-horizon groups can be created in a given TLS service. Maximum is set to 15 for a TLS service with svcVplsType set to 'bVpls', or 'iVpls'. | |
| U32 tlsShgInstanceId | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.4 | Unsigned32 | read-only | The value of the object tlsShgInstanceId indicates the instance identifier for the split horizon group. |
| TIM tlsShgLastMgmtChange | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.6 | TimeStamp | read-only | The value of the object tlsShgLastMgmtChange indicates the value of sysUpTime at the time of the most recent management-initiated change to this split-horizon group. |
| TNA tlsShgName | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.1 | TNamedItem | not-accessible | The value of the object tlsShgName specifies the name of the split-horizon group. The name must be unique within a TLS, however the same name can appear in different TLS services, in which case they denote different split-horizon groups. |
| T/F tlsShgResidential | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.7 | TruthValue | read-create | The value of the object tlsShgResidential specifies whether or not the split-horizon-group is residential.In a Residential Split Horizon Group (RSHG) there is no downstream broadcast, and all saps in the group will share the default ingress queue. The value can be specified during row-creation, cannot be changed later on. |
| T/F tlsShgRestProtSrcMac | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.8 | TruthValue | read-create | The value of the object tlsShgRestProtSrcMac indicates how the agent will handle relearn requests for protected MAC addresses received on SAP's belonging to this SHG. When the value of this object is 'true' requests to relearn a protected MAC address will be ignored. In addition, if the value of tlsShgRestProtSrcMacAction is 'disable', then the SAP where the protected source MAC was seen will be brought operationally down. |
| INT tlsShgRestProtSrcMacAction | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.10 | INTEGER | read-create | The value of the object tlsShgRestProtSrcMacAction indicates the action to take whenever a relearn request for a protected MAC is received on a restricted SAP belonging to this SHG. When the value of this object is 'disable' the SAP will be placed in the operational down state, with the operating flag 'recProtSrcMac' set. When the value of this object is 'alarm-only', the SAP will be left up and only a notification, sapReceivedProtSrcMac, will be generated. When the value of this object is 'discardFrame', the SAP will start discarding the frame in addition to generating sapReceivedProtSrcMac notification. |
| T/F tlsShgRestUnprotDstMac | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.9 | TruthValue | read-create | The value of the object tlsShgRestUnprotDstMac indicates how the system will forward packets destined to an unprotected MAC address. When the value of this object is 'true' packets destined to an unprotected MAC address will be dropped. |
| ROW tlsShgRowStatus | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.2 | RowStatus | read-create | The value of the object tlsShgRowStatus specifies the status of this row. The only values supported during a set operation are 'createAndGo' and 'destroy'. To delete an entry from this table, there should be no TLS SAP's or TLS spoke SDP Bindings refering to it. |
| TNA tlsShgSiteName | 1.3.6.1.4.1.6527.3.1.2.4.2.6.1.12 | TNamedItemOrEmpty | read-only | The value of tlsShgSiteName indicates the site-name associated with this SHG. |
| TMN tlsSpbFdbEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.6 | TmnxEncapVal | read-only | The value of tlsSpbFdbEncapValue indicates the encap-value of the SAP for this FDB entry. This object is valid only when tlsSpbFdbLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| tlsSpbFdbEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1 | not-accessible | The tlsSpbFdbEntry contains a specific user VPLS SPB FDB mac-address related information. | |
| TMN tlsSpbFdbLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.4 | TmnxSpbFdbLocale | read-only | The value of the object tlsSpbFdbLocale indicates locality of the this FDB entry. |
| MAC tlsSpbFdbMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.1 | MacAddress | not-accessible | The value of the object tlsSpbFdbMacAddr indicates the 48-bit IEEE 802.3 MAC address. |
| TMN tlsSpbFdbMEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.12 | TmnxEncapVal | read-only | The value of tlsSpbFdbMEncapValue indicates the encap-value of the SAP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFdbMLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| TMN tlsSpbFdbMLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.10 | TmnxSpbFdbLocale | read-only | The value of the object tlsSpbFdbMLocale indicates locality of this FDB entry for multicast traffic. |
| TMN tlsSpbFdbMPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.11 | TmnxPortID | read-only | The value of tlsSpbFdbMPortId indicates the port-id of the SAP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFdbMLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| SDP tlsSpbFdbMSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.13 | SdpId | read-only | The value of tlsSpbFdbMSdpId indicates the sdp identifier of the SDP binding of the SDP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFdbMLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN tlsSpbFdbMState | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.15 | TmnxSpbFdbState | read-only | The tlsSpbFdbMState indicates the state of this FDB entry for multicast traffic in the user VPLS. |
| U32 tlsSpbFdbMVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.14 | Unsigned32 | read-only | The value of tlsSpbFdbMPortId indicates the virtual-circuit identifier (vc-id) of the SDP binding of the SDP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFdbMLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN tlsSpbFdbPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.5 | TmnxPortID | read-only | The value of tlsSpbFdbPortId indicates the port-id of the SAP for this FDB entry. This object is valid only when tlsSpbFdbLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| SDP tlsSpbFdbSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.7 | SdpId | read-only | The value of tlsSpbFdbSdpId indicates the sdp identifier of the SDP binding of the SDP for this FDB entry. This object is valid only when tlsSpbFdbLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN tlsSpbFdbState | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.9 | TmnxSpbFdbState | read-only | The tlsSpbFdbState indicates the state of this FDB entry in the user VPLS. |
| tlsSpbFdbTable | 1.3.6.1.4.1.6527.3.1.2.4.2.131 | not-accessible | The tlsSpbFdbTable contains user VPLS Shortest Path Bridging (SPB) Forwarding Data-Base (FDB) information. | |
| U32 tlsSpbFdbVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.131.1.8 | Unsigned32 | read-only | The value of tlsSpbFdbPortId indicates the virtual-circuit identifier (vc-id) of the SDP binding of the SDP for this FDB entry. This object is valid only when tlsSpbFdbLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN tlsSpbFidFdbEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.6 | TmnxEncapVal | read-only | The value of tlsSpbFidFdbEncapValue indicates the encap-value of the SAP for this FDB entry. This object is valid only when tlsSpbFidFdbLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| tlsSpbFidFdbEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1 | not-accessible | The tlsSpbFidFdbEntry contains a specific control VPLS SPB FDB mac-address related information. | |
| TIM tlsSpbFidFdbLastUpdate | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.14 | TimeStamp | read-only | The value of tlsSpbFidFdbLastUpdate indicates the sysUpTime at the time unicast SAP/SDP information of this entry was last updated. |
| TMN tlsSpbFidFdbLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.4 | TmnxSpbFdbLocale | read-only | The value of the object tlsSpbFidFdbLocale indicates locality of the this FDB entry. |
| MAC tlsSpbFidFdbMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.1 | MacAddress | not-accessible | The value of the object tlsSpbFidFdbMacAddr indicates the 48-bit IEEE 802.3 MAC address. |
| TMN tlsSpbFidFdbMEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.11 | TmnxEncapVal | read-only | The value of tlsSpbFidFdbMEncapValue indicates the encap-value of the SAP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFidFdbMLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| TIM tlsSpbFidFdbMLastUpdate | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.15 | TimeStamp | read-only | The value of tlsSpbFidFdbLastUpdate indicates the sysUpTime at the time multicast SAP/SDP information of this entry was last updated. |
| TMN tlsSpbFidFdbMLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.9 | TmnxSpbFdbLocale | read-only | The value of the object tlsSpbFidFdbMLocale indicates locality of the this FDB entry for multicast traffic. |
| TMN tlsSpbFidFdbMPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.10 | TmnxPortID | read-only | The value of tlsSpbFidFdbMPortId indicates the port-id of the SAP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFidFdbMLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| SDP tlsSpbFidFdbMSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.12 | SdpId | read-only | The value of tlsSpbFidFdbMSdpId indicates the sdp identifier of the SDP binding of the SDP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFidFdbMLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| U32 tlsSpbFidFdbMVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.13 | Unsigned32 | read-only | The value of tlsSpbFidFdbMPortId indicates the virtual-circuit identifier (vc-id) of the SDP binding of the SDP for this FDB entry for multicast traffic. This object is valid only when tlsSpbFidFdbMLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN tlsSpbFidFdbPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.5 | TmnxPortID | read-only | The value of tlsSpbFidFdbPortId indicates the port-id of the SAP for this FDB entry. This object is valid only when tlsSpbFidFdbLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| SDP tlsSpbFidFdbSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.7 | SdpId | read-only | The value of tlsSpbFidFdbSdpId indicates the sdp identifier of the SDP binding of the SDP for this FDB entry. This object is valid only when tlsSpbFidFdbLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| tlsSpbFidFdbTable | 1.3.6.1.4.1.6527.3.1.2.4.2.132 | not-accessible | The tlsSpbFidFdbTable contains control VPLS Shortest Path Bridging (SPB) Forwarding Data-Base (FDB) information. | |
| U32 tlsSpbFidFdbVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.132.1.8 | Unsigned32 | read-only | The value of tlsSpbFidFdbPortId indicates the virtual-circuit identifier (vc-id) of the SDP binding of the SDP for this FDB entry. This object is valid only when tlsSpbFidFdbLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| TMN tlsSpbFidMFibEncapValue | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.4 | TmnxEncapVal | not-accessible | The value of tlsSpbFidMFibEncapValue indicates the encap-value of the SAP for this multicast forwarding data-base (MFIB) entry. This object is valid only when tlsSpbFidFdbLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| tlsSpbFidMFibEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1 | not-accessible | The tlsSpbFidMFibEntry contains an entry for specific SAP or SDP in the multicast forwarding data-base of the controlling vpls for the group MAC address. | |
| U32 tlsSpbFidMFibIsid | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.7 | Unsigned32 | read-only | The value of tlsSpbFidMFibIsid indicates the value of ISID of the group MAC address of this entry. |
| TIM tlsSpbFidMFibLastUpdate | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.8 | TimeStamp | read-only | The value of tlsSpbFidMFibLastUpdate indicates the sysUpTime at the time this entry was last updated. |
| TMN tlsSpbFidMFibLocale | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.2 | TmnxSpbFdbLocale | not-accessible | The value of the object tlsSpbFidMFibLocale indicates locality of the this FDB entry. |
| MAC tlsSpbFidMFibMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.1 | MacAddress | not-accessible | The value of the object tlsSpbFidMFibMacAddr indicates the 48-bit IEEE 802.3 group MAC address. |
| TMN tlsSpbFidMFibPortId | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.3 | TmnxPortID | not-accessible | The value of tlsSpbFidMFibPortId indicates the port-id of the SAP for this multicast forwarding data-base (MFIB) entry. This object is valid only when tlsSpbFidFdbLocale is set to 'sap'. This object is otherwise insignificant and should contain a value of 0. |
| SDP tlsSpbFidMFibSdpId | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.5 | SdpId | not-accessible | The value of tlsSpbFidMFibSdpId indicates the sdp identifier of the SDP binding of the SDP for this FDB entry. This object is valid only when tlsSpbFidMFibLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| tlsSpbFidMFibTable | 1.3.6.1.4.1.6527.3.1.2.4.2.134 | not-accessible | The tlsSpbFidMFibTable contains control VPLS Shortest Path Bridging (SPB) multicast forwarding data-base (MFib) information. | |
| U32 tlsSpbFidMFibVcId | 1.3.6.1.4.1.6527.3.1.2.4.2.134.1.6 | Unsigned32 | not-accessible | The value of tlsSpbFidMFibPortId indicates the virtual-circuit identifier (vc-id) of the SDP binding of the SDP for this FDB entry. This object is valid only when tlsSpbFidMFibLocale is set to 'sdp'. This object is other-wise insignificant and should contain a value of 0. |
| tlsSpbMFibEntry | 1.3.6.1.4.1.6527.3.1.2.4.2.133.1 | not-accessible | The tlsSpbMFibEntry contains an entry for specific SAP or SDP in the multicast forwarding data-base of the user VPLS for the group MAC address. | |
| U32 tlsSpbMFibIsid | 1.3.6.1.4.1.6527.3.1.2.4.2.133.1.2 | Unsigned32 | read-only | The value of tlsSpbMFibIsid indicates the value of ISID of the group MAC address of this entry. |
| MAC tlsSpbMFibMacAddr | 1.3.6.1.4.1.6527.3.1.2.4.2.133.1.1 | MacAddress | not-accessible | The value of the object tlsSpbMFibMacAddr indicates the 48-bit IEEE 802.3 group MAC address. |
| BIT tlsSpbMFibState | 1.3.6.1.4.1.6527.3.1.2.4.2.133.1.3 | Bits | read-only | The tlsSpbMFibState indicates the state of this FDB entry in the user VPLS. |
| tlsSpbMFibTable | 1.3.6.1.4.1.6527.3.1.2.4.2.133 | not-accessible | The tlsSpbMFibTable contains user VPLS Shortest Path Bridging (SPB) multicast forwarding data-base (Mfib) information. | |
| tmnxApipeV3v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.119 | The group of objects supporting management of APIPE services on Alcatel-Lucent SROS series systems release 3.0. | ||
| tmnxArpHostBgpGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.138 | The group of objects supporting management of Services ARP hosts' BGP capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxArpHostGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.130 | The group of objects supporting management of Services ARP hosts capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxArpHostNotifyGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.403 | The group of notifications for the Services ARP hosts feature on Alcatel-Lucent SROS series systems. | ||
| tmnxArpHostNotifyObjsGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.201 | The group of objects supporting management of Services notification objects on Alcatel-Lucent SROS series systems. | ||
| tmnxArpHostV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.174 | The group of objects supporting management of Services ARP hosts capabilities on Alcatel-Lucent SROS series systems in release 10.0. | ||
| tmnxArpHostV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.147 | The group of objects supporting management of Services ARP hosts capabilities on Alcatel-Lucent SROS series systems in release 8.0. | ||
| tmnxCustCompliance | 1.3.6.1.4.1.6527.3.1.1.4.1.1.100 | The compliance statement for management of services customers on Alcatel-Lucent SROS series systems. | ||
| tmnxCustCompliances | 1.3.6.1.4.1.6527.3.1.1.4.1.1 | |||
| tmnxCustConformance | 1.3.6.1.4.1.6527.3.1.1.4.1 | |||
| tmnxCustGroups | 1.3.6.1.4.1.6527.3.1.1.4.1.2 | |||
| tmnxCustObjs | 1.3.6.1.4.1.6527.3.1.2.4.1 | |||
| BRI tmnxCustomerBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.5.1 | BridgeId | accessible-for-notify | tmnxCustomerBridgeId specifies the bridge identifier of the customer's device |
| BRI tmnxCustomerRootBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.5.2 | BridgeId | accessible-for-notify | tmnxCustomerRootBridgeId specifies the bridge identifier of the customer's designated root. |
| tmnxCustV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.1.2.100 | The group of objects supporting management of Services customers general capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxCustV8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.1.1.101 | The compliance statement for management of services customers on Alcatel-Lucent SROS series systems. | ||
| tmnxCustV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.1.2.102 | The group of objects supporting management of Services customers general capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxCustV9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.1.1.102 | The compliance statement for management of services customers on Alcatel-Lucent SROS series systems. | ||
| tmnxCustV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.1.2.103 | The group of objects supporting management of Services customers general capabilities on Alcatel-Lucent SROS series systems. | ||
| NTF tmnxEndPointTxActiveChanged | 1.3.6.1.4.1.6527.3.1.3.4.2.0.16 | The tmnxEndPointTxActiveChanged notification is generated when the transmit active object on an endpoint changes. | ||
| STR tmnxFailureDescription | 1.3.6.1.4.1.6527.3.1.2.4.6.36 | DisplayString | accessible-for-notify | The value of the object tmnxFailureDescription is a printable character string which contains information about the reason why the notification is sent. |
| NTF tmnxNewCistRegionalRootBridge | 1.3.6.1.4.1.6527.3.1.3.4.5.0.33 | The tmnxNewCistRegionalRootBridge notification is generated when a new regional root bridge has been elected for the Common and Internal Spanning Tree. A new regional root bridge creates a new spanning tree topology and may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF tmnxNewMstiRegionalRootBridge | 1.3.6.1.4.1.6527.3.1.3.4.5.0.34 | The tmnxNewMstiRegionalRootBridge notification is generated when a new regional root bridge has been elected for the Multiple Spanning Tree Instance. A new regional root bridge creates a new spanning tree topology and may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| TST tmnxOldSdpBindTlsStpPortState | 1.3.6.1.4.1.6527.3.1.2.4.5.4 | TStpPortState | accessible-for-notify | tmnxOldSdpBindTlsStpPortState specifies the previous state of an SDP binding. |
| BRI tmnxOtherBridgeId | 1.3.6.1.4.1.6527.3.1.2.4.5.3 | BridgeId | accessible-for-notify | tmnxOtherBridgeId specifies the bridge identifier of the device from which a BPDU was received. |
| NTF tmnxPipStpExcepCondStateChng | 1.3.6.1.4.1.6527.3.1.3.4.5.0.41 | The tmnxPipStpExcepCondStateChng notification is generated when the value of the object tlsPipStpException has changed, i.e. when the exception condition changes on the indicated PIP Uplink. | ||
| tmnxServConformance | 1.3.6.1.4.1.6527.3.1.1.4 | |||
| tmnxServNotifications | 1.3.6.1.4.1.6527.3.1.3.4 | |||
| tmnxServObjs | 1.3.6.1.4.1.6527.3.1.2.4 | |||
| tmnxSvc7450V10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.115 | The compliance statement for management of services on Alcatel-Lucent 7450 ESS series systems release R10.0. | ||
| tmnxSvc7450V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.100 | The compliance statement for management of services on Alcatel-Lucent 7450 ESS series systems release R6.0. | ||
| tmnxSvc7450V6v1Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.103 | The compliance statement for management of services on Alcatel-Lucent 7450 ESS series systems release R6.1. | ||
| tmnxSvc7450V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.106 | The compliance statement for management of services on Alcatel-Lucent 7450 ESS series systems release R7.0. | ||
| tmnxSvc7450V8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.109 | The compliance statement for management of services on Alcatel-Lucent 7450 ESS series systems release R8.0. | ||
| tmnxSvc7450V9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.112 | The compliance statement for management of services on Alcatel-Lucent 7450 ESS series systems release R9.0. | ||
| tmnxSvc7710V10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.117 | The compliance statement for management of services on Alcatel-Lucent 7710 SR series systems release R10.0. | ||
| tmnxSvc7710V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.102 | The compliance statement for management of services on Alcatel-Lucent 7710 SR series systems release R6.0. | ||
| tmnxSvc7710V6v1Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.105 | The compliance statement for management of services on Alcatel-Lucent 7710 SR series systems release R6.1. | ||
| tmnxSvc7710V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.108 | The compliance statement for management of services on Alcatel-Lucent 7710 SR series systems release R7.0. | ||
| tmnxSvc7710V8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.111 | The compliance statement for management of services on Alcatel-Lucent 7710 SR series systems release R8.0. | ||
| tmnxSvc7710V9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.114 | The compliance statement for management of services on Alcatel-Lucent 7710 SR series systems release R9.0. | ||
| tmnxSvc7750V10v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.116 | The compliance statement for management of services on Alcatel-Lucent 7750 SR series systems release R10.0. | ||
| tmnxSvc7750V6v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.101 | The compliance statement for management of services on Alcatel-Lucent 7750 SR series systems release R6.0. | ||
| tmnxSvc7750V6v1Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.104 | The compliance statement for management of services on Alcatel-Lucent 7750 SR series systems release R6.1. | ||
| tmnxSvc7750V7v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.107 | The compliance statement for management of services on Alcatel-Lucent 7750 SR series systems release R7.0. | ||
| tmnxSvc7750V8v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.110 | The compliance statement for management of services on Alcatel-Lucent 7750 SR series systems release R8.0. | ||
| tmnxSvc7750V9v0Compliance | 1.3.6.1.4.1.6527.3.1.1.4.2.1.113 | The compliance statement for management of services on Alcatel-Lucent 7750 SR series systems release R9.0. | ||
| tmnxSvcApipeInfoV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.409 | The group of objects supporting management of APIPE services on Alcatel-Lucent SROS series systems for release 9.0. | ||
| tmnxSvcBsxV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.121 | The group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcBsxV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.151 | The group of objects supporting management of BSX (Application Assurance) capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcCompliances | 1.3.6.1.4.1.6527.3.1.1.4.2.1 | |||
| tmnxSvcConformance | 1.3.6.1.4.1.6527.3.1.1.4.2 | |||
| tmnxSvcDhcpBgpV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.136 | The group of objects containing the BGP-parameters set by DHCP. | ||
| tmnxSvcDhcpV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.170 | The group of objects supporting management of Services DHCP Lease capabilities on Alcatel-Lucent SROS series systems that were added in release 10.0. | ||
| tmnxSvcDhcpV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.110 | The group of objects supporting management of Services DHCP Lease capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcDhcpV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.139 | The group of objects supporting management of Services DHCP Lease capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcDhcpV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.150 | The group of objects supporting management of Services DHCP Lease capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcDhcpV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.164 | The group of objects supporting management of Services DHCP Lease capabilities on Alcatel-Lucent SROS series systems that were added in release 9.0. | ||
| tmnxSvcEndPointV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.111 | The group of objects supporting management of Services endpoint capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcEpipeV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.117 | The group of objects supporting management of Services PBB Epipe capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcEthCfmGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.407 | The group of objects supporting Ethernet Connectivity Fault Management (CFM) for the services feature on Alcatel-Lucent SROS series systems for release 9.0. | ||
| tmnxSvcGroups | 1.3.6.1.4.1.6527.3.1.1.4.2.2 | |||
| tmnxSvcGrpObjs | 1.3.6.1.4.1.6527.3.1.2.4.2.113 | |||
| tmnxSvcIesIfNHV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.176 | The group of objects supporting management of Services IES interface capabilities on Alcatel-Lucent SROS series systems in release 11.0. | ||
| tmnxSvcIesIfV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.173 | The group of objects supporting management of Services IES interface capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcIesIfV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.104 | The group of objects supporting management of Services IES interface capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcIesIfV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.153 | The group of objects supporting management of Services IES interface capabilities on Alcatel-Lucent SROS series systems added in release 7.0. | ||
| tmnxSvcIesIfV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.160 | The group of objects supporting management of Services IES interface capabilities on Alcatel-Lucent SROS series systems added in release 8.0. | ||
| tmnxSvcIfDHCP6V6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.114 | The group of objects supporting management of Services interface DHCP capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcInterAsV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.157 | The group of objects supporting management of inter-AS Service on Alcatel-Lucent SROS series systems for Release 8.0. | ||
| tmnxSvcIpipeV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.135 | The group of objects supporting management of IPIPE Service on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcIpipeV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.156 | The group of objects supporting management of IPIPE Service on Alcatel-Lucent SROS series systems for Release 8.0. | ||
| tmnxSvcMacReNotifyGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.167 | The group of objects supporting management of mac-notification capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcMCEPNotifyGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.404 | The group of notifications for the Services multi-chassis endpoint feature on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcMrpPolicyV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.144 | The group of objects supporting mrp-policies on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcMSPwPeV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.162 | The group of objects supporting management of Services capabilities on Alcatel-Lucent SROS series systems for release 9.0. | ||
| tmnxSvcMvrpV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.155 | The group of objects supporting management of MVRP capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcNotifyObjs | 1.3.6.1.4.1.6527.3.1.2.4.6 | |||
| tmnxSvcNotifyObjsV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.200 | The group of objects supporting management of Services notification objects on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcNotifyObjsV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.202 | The group of objects supporting management of Services notification objects on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcNotifyObsoletedGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.402 | The group of notifications for the services feature on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcNotifyV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.413 | The group of notifications for the services feature on Alcatel-Lucent SROS series systems for release 8.0. | ||
| tmnxSvcNotifyV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.401 | The group of notifications for the services feature on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcNotifyV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.405 | The group of notifications for the services feature on Alcatel-Lucent SROS series systems for release 7.0. | ||
| tmnxSvcNotifyV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.406 | The group of notifications for the services feature on Alcatel-Lucent SROS series systems for release 8.0. | ||
| tmnxSvcNotifyV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.408 | The group of notifications for the services feature on Alcatel-Lucent SROS series systems for release 9.0. | ||
| NUM tmnxSvcObjRow | 1.3.6.1.4.1.6527.3.1.2.4.6.33 | RowPointer | accessible-for-notify | The value of the object tmnxSvcObjRow indicates the object that has failed to perform the set action requested by the Time-Of-Day Suite. Its value will be the OID of the first accessible object in the row of the sapBaseInfoTable or in the custMultiServiceSiteTable, depending on whether the object is a SAP or a Customer Multi-Service Site. |
| STR tmnxSvcObjRowDescr | 1.3.6.1.4.1.6527.3.1.2.4.6.34 | DisplayString | accessible-for-notify | The value of the object tmnxSvcObjRowDescr indicates the object that has failed to perform the set action requested by the Time-Of-Day Suite. The value will either be a SAP-id or a Customer Multi-Service Site id, presented in readable format, depending on whether the object is a SAP or a Customer Multi-Service Site. |
| tmnxSvcObjs | 1.3.6.1.4.1.6527.3.1.2.4.2 | |||
| STR tmnxSvcObjTodSuite | 1.3.6.1.4.1.6527.3.1.2.4.6.35 | DisplayString | accessible-for-notify | The value of the object tmnxSvcObjTodSuite indicates the name of the involved ToD Suite. |
| NTF tmnxSvcObjTodSuiteApplicFailed | 1.3.6.1.4.1.6527.3.1.3.4.2.0.15 | The tmnxSvcObjTodSuiteApplicFailed notification is generated when the object has failed to perform the set action requested by the Time-Of-Day Suite. The object can be either a SAP or a Customer Multi-Service Site. | ||
| tmnxSvcObsoletedV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.300 | The group of obsolete objects for the services feature on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcObsoletedV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.301 | The group services feature objects obsoleted in release 8.0 of Alcatel-Lucent SROS series systems. | ||
| tmnxSvcObsoletedV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.302 | The group services feature objects obsoleted in release 9.0 of Alcatel-Lucent SROS SR series systems. | ||
| tmnxSvcOperGrpV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.163 | The group of objects supporting management of Services capabilities on Alcatel-Lucent SROS series systems for release 9.0. | ||
| tmnxSvcP2mpGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.412 | The group of objects supporting management of P2MP for vpls feature on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcPbbMacV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.140 | The group of objects supporting management of Services PBB MAC capabilities on Alcatel-Lucent SROS series systems. | ||
| NTF tmnxSvcPEDiscPolServOperStatChg | 1.3.6.1.4.1.6527.3.1.3.4.2.0.17 | The tmnxSvcPEDiscPolServOperStatChg notification is generated when the operational status of a Radius server, configured for use as PE Discovery Policy Server, has transitioned either from 'up' to 'down' or from 'down' to 'up'. | ||
| tmnxSvcPEV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.112 | The group of objects supporting management of Services PE Discovery capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcPwV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.158 | The group of objects supporting management of services specific psuedo-wire capabilities on Alcatel-Lucent SROS series systems for release 8.0. | ||
| tmnxSvcRdntV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.107 | The group of objects supporting management of Services Redundancy group capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcRoutedCOV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.171 | The group of objects supporting routed CO on R10.0 Alcatel-Lucent SROS systems. | ||
| tmnxSvcRoutedCOV5v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.120 | The group of objects supporting routed CO Alcatel-Lucent SROS systems. | ||
| tmnxSvcRoutedCOV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.133 | The group of objects supporting routed CO Alcatel-Lucent SROS systems. | ||
| tmnxSvcRoutedCOV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.146 | The group of objects supporting routed CO Alcatel-Lucent SROS systems. | ||
| tmnxSvcRoutedCOV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.165 | The group of objects supporting routed CO on R9.0 Alcatel-Lucent SROS systems. | ||
| tmnxSvcRoutedVplsV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.154 | The group of objects supporting management of Services Routed VPLS capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcSiteV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.145 | The group of objects supporting sites on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcSpbGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.410 | The group of objects supporting management of Shortest Path Bridging feature on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsBackbone6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.115 | The group of objects supporting management of Services PBB capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsBackbone6v1Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.122 | The group of objects supporting management of Services PBB capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsBgpV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.116 | The group of objects supporting management of Services BGP AD capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsBgpV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.148 | The group of objects supporting management of Services BGP AD capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsEgrV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.109 | The group of objects supporting management of Services TLS Egress capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsFdbV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.103 | The group of objects supporting management of Services TLS FDB capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsFdbV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.141 | The group of objects supporting management of Services TLS FDB capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsMFibV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.106 | The group of objects supporting management of Services TLS MFib capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsMstiV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.108 | The group of objects supporting management of Services TLS MSTI capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsPipV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.118 | The group of objects supporting management of Services TLS PIP capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsPipV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.137 | The group of objects supporting management of Services TLS PIP capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsPipV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.159 | The group of objects supporting management of Services TLS PIP capabilities on Alcatel-Lucent SROS series systems added in release 8.0. | ||
| tmnxSvcTlsShgV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.105 | The group of objects supporting management of Services TLS Split Hoirizon Group capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.102 | The group of objects supporting management of Services TLS general capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcTlsV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.152 | The group of objects supporting management of Services TLS general capabilities on Alcatel-Lucent SROS series systems added in release 7.0. | ||
| tmnxSvcV10v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.172 | The group of objects supporting generic services on R10.0 Alcatel-Lucent SROS systems. | ||
| tmnxSvcV6v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.101 | The group of objects supporting management of Services general capabilities on Alcatel-Lucent SROS series systems. | ||
| tmnxSvcV7v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.142 | The group of objects supporting management of Services capabilities on Alcatel-Lucent SROS series systems added in release 7.0. | ||
| tmnxSvcV8v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.143 | The group of objects supporting management of Services capabilities on Alcatel-Lucent SROS series systems for release 8.0. | ||
| tmnxSvcV9v0Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.161 | The group of objects supporting management of Services capabilities on Alcatel-Lucent SROS series systems for release 9.0. | ||
| tmnxSvcV9v0R4Group | 1.3.6.1.4.1.6527.3.1.1.4.2.2.166 | The group of objects supporting management of Services capabilities on Alcatel-Lucent SROS series systems for release 9.0 R4. | ||
| tmnxSvcVllBgpGroup | 1.3.6.1.4.1.6527.3.1.1.4.2.2.411 | The group of objects supporting management of Epipe BGP multi-homing feature on Alcatel-Lucent SROS series systems. | ||
| tmnxTstpCompliances | 1.3.6.1.4.1.6527.3.1.1.4.5.1 | |||
| tmnxTstpConformance | 1.3.6.1.4.1.6527.3.1.1.4.5 | |||
| tmnxTstpGroups | 1.3.6.1.4.1.6527.3.1.1.4.5.2 | |||
| tmnxTstpNotifyObjs | 1.3.6.1.4.1.6527.3.1.2.4.5 | |||
| TST tmnxVcpState | 1.3.6.1.4.1.6527.3.1.2.4.5.5 | TStpPortState | accessible-for-notify | tmnxVcpState specifies the current state of a Virtual Core Port (VCP). |
| NTF topologyChangePipMajorState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.39 | The topologyChangePipMajorState notification is generated when a PIP Uplink has transitioned its state from learning to forwarding or from forwarding to blocking or broken. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine the severity of connectivity loss. | ||
| NTF topologyChangePipState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.40 | The topologyChangePipState notification is generated when a PIP Uplink has transitioned state to blocking or broken from a state other than forwarding. This event complements what is not covered by topologyChangePipMajorState. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| NTF topologyChangeVcpState | 1.3.6.1.4.1.6527.3.1.3.4.5.0.3 | The topologyChangeVcpState notification is generated when a VCP has transitioned its state from disabled to forwarding or from forwarding to disabled. The spanning tree topology has been modified and it may denote loss of customer access or redundancy. Check the new topology against the provisioned topology to determine severity of connectivity loss. | ||
| tstpTraps | 1.3.6.1.4.1.6527.3.1.3.4.5.0 | |||
| tstpTrapsPrefix | 1.3.6.1.4.1.6527.3.1.3.4.5 | |||
| NTF vcpActiveProtocolChange | 1.3.6.1.4.1.6527.3.1.3.4.5.0.32 | The vcpActiveProtocolChange notification is generated when the spanning tree protocol on this VCP changes from rstp to stp or vise versa. No recovery is needed. |
RFC description
Alcatel-Lucent TimeRA service management MIB for provider edge router services.
Start monitoring Nokia/Alcatel-Lucent 7x50 SROS-based Service Router platforms, entire product line (customer/service provisioning status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.