TIMETRA-QOS-MIB

All MIBs › TIMETRA-QOS-MIB

Organization: Alcatel-Lucent

Last Updated: 2011-02-01

Category: Nokia SR OS / Alcatel-Lucent 7750 SR, QoS

Description:

Manages Nokia/Alcatel-Lucent 7750 SR QoS policy classification, queuing, and scheduling configuration.

Imported Objects

AtmServiceCategory
AtmTrafficDescrParamIndex
AtmVcIdentifier

From INET-ADDRESS-MIB

InetAddress
InetAddressIPv6
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-PORT-MIB

TmnxMcMlpppClassIndex

From TIMETRA-TC-MIB

Dot1PPriority
IpAddressPrefixLength
QTagFullRange
QTagFullRangeOrNone
ServiceAccessPoint
TAdaptationRule
TAdvCfgRate
TAtmTdpDescrType
TBWRateType
TBurstHundredthsOfPercent
TBurstLimit
TBurstPercent
TBurstPercentOrDefault
TBurstSize
TBurstSizeBytes
TCIRRate
TClassBurstLimit
TDEProfile
TDEProfileOrDei
TDEValue
TDSCPName
TDSCPNameOrEmpty
TDSCPValue
TEgrPolicerId
TEgrPolicerIdOrNone
TEgressHsmdaCounterIdOrZero
TEgressHsmdaPerPacketOffset
TEgressHsmdaQueueId
TEgressQPerPacketOffset
TEgressQueueId
TEntryId
TFCName
TFCNameOrEmpty
TFrameType
THPolCIRRate
THPolPIRRate
THPolVirtualScheCIRRate
THPolVirtualSchePIRRate
THSMDABurstSizeBytes
THSMDAQueueBurstLimit
THsmdaCIRKRate
THsmdaPIRKRate
THsmdaPIRMRate
THsmdaPolicyIncludeQueues
THsmdaPolicyScheduleClass
THsmdaSchedulerPolicyGroupId
THsmdaWeight
THsmdaWeightClass
THsmdaWrrWeight
TIngPolicerId
TIngPolicerIdOrNone
TIngressHsmdaCounterIdOrZero
TIngressHsmdaPerPacketOffset
TIngressHsmdaQueueId
TIngressQueueId
TIpProtocol
TItemDescription
TItemMatch
TItemScope
TLNamedItemOrEmpty
TLevel
TLevelOrDefault
TLspExpValue
TMacFilterType
TMatchCriteria
TMaxDecRate
TMcFrQoSProfileId
TMlpppQoSProfileId
TNamedItem
TNamedItemOrEmpty
TNetworkPolicyID
TNonZeroWeight
TPIRRate
TPIRRatePercent
TPerPacketOffset
TPlcrBurstSizeBytes
TPolicerRateType
TPolicerWeight
TPortSchedulerCIR
TPortSchedulerPIR
TPortSchedulerPIRRate
TPrecValue
TPrecValueOrNone
TPriority
TPriorityOrDefault
TProfile
TProfileOrDei
TProfileOrNone
TProfileUseDEOrNone
TQueueId
TQueueMode
TRatePercent
TRateType
TRemarkType
TSapEgressPolicyID
TSapIngressPolicyID
TTcpUdpPort
TTcpUdpPortOperator
TWeight
TmnxEgrPolicerStatMode
TmnxEnabledDisabled
TmnxIngPolicerStatMode
TmnxSlopeMap

What Is TIMETRA-QOS-MIB?

TIMETRA-QOS-MIB is a Nokia/Alcatel-Lucent proprietary MIB for the 7750 SR family of SR OS service routers, used to configure and monitor Quality of Service (QoS) policy elements including DSCP name mappings and forwarding classes (FCs) that drive traffic classification, queuing, and scheduling. It exposes configuration-oriented tables that name and map QoS constructs, along with row-status and storage-type columns reflecting the current software configuration state of each policy object. Searching for TIMETRA-QOS-MIB MIB details typically leads to the tDSCPNameTable and tFCNameTable as the objects of practical monitoring interest. In monitoring terms this MIB is used to confirm QoS policy configuration integrity - e.g., that a DSCP-to-name mapping or forwarding-class definition exists and is active rather than notReady/notInService - complementing traffic and interface counters found elsewhere to explain why traffic is being classified or queued a particular way. It is one of many TIMETRA-* MIBs in the SR OS suite and depends on other Alcatel-Lucent modules such as the chassis and virtual-router MIBs for full system context. It is deployed on Nokia/Alcatel-Lucent 7750 SR, 7450 ESS, and related SR OS-based service router platforms in carrier and enterprise WAN environments.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

DSCP-to-name mappings
DSCP entry row status/storage type
forwarding class names
forwarding class row status
QoS policy configuration state
last-changed timestamps for QoS objects

Supported Devices

Nokia/Alcatel-Lucent 7750 SR, 7450 ESS SR OS platforms, entire product line (QoS DSCP/forwarding-class config status)

Monitoring Examples

An administrator would poll tDSCPNameTable/tDSCPNameEntry (keyed by tDSCPNameDscpValue) to confirm which DSCP code points map to which named classifier, check tDSCPNameRowStatus to verify a mapping is active rather than notReady, and cross-reference tFCNameTable/tFCNameEntry (tFCName) to see which forwarding classes are defined; an unexpected notInService status or a missing entry would indicate a QoS policy misconfiguration causing traffic to fall back to default classification.

OIDs

OID symbolic	OID numeric	Type	Access	Description
U32 tAdvCfgAbvOffCapPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.16	Unsigned32	read-create	The value of tAdvCfgAbvOffCapPirPrcnt specifies the percentage of the child's administrative PIR that should be fair share increase limit, capped by the child's PIR. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '10000', the fair share operational PIR rate increase limit from all child policers and queues associated with tAdvCfgPolicyName policy are removed.
I32 tAdvCfgAbvOffCapRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.17	Integer32	read-create	The value of tAdvCfgAbvOffCapRate specifies the explicit number of kilobits-per-second that should be used as the limit to the child's fair share increase to the operational PIR. When the value of tAdvCfgAbvOffCapRate is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapRate is set to '-1', it means maximum rate.
U32 tAdvCfgBWDGranPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.18	Unsigned32	read-create	The value of tAdvCfgBWDGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the rounding step value. When the value of tAdvCfgBWDGranPirPrcnt is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
TAD tAdvCfgBWDGranRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.19	TAdvCfgRate	read-create	The value of tAdvCfgBWDGranRate specifies the explicit number of kilobits-per-second that should be used as the child's rounding step value. When the value of tAdvCfgBWDGranRate is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
TAD tAdvCfgChildAdminRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.6	TAdvCfgRate	read-create	The value of tAdvCfgChildAdminRate specifies the explicit number of kilobits-per-second that should be added to the child's offered rate. When the value of tAdvCfgChildAdminRate is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
U32 tAdvCfgChildAdmnPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.5	Unsigned32	read-create	The value of tAdvCfgChildAdmnPirPrcnt specifies the percentage of the child's administrative PIR that should be added to the child's offered rate, capped by the child's PIR. When the value of tAdvCfgChildAdmnPirPrcnt is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
T/F tAdvCfgDecOnly	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.21	TruthValue	read-create	The value of tAdvCfgDecOnly specifies the tAdvCfgTimeAvgFactor adjustment to be applied if the new offered rate is decreasing compared to the previous offered rate. If the new offered rate is greater than the previous offered rate, the adjustment is not applied. When the tAdvCfgDecOnly is set to 'false', it has no impact on tAdvCfgTimeAvgFactor adjustment.
TIT tAdvCfgDescription	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.4	TItemDescription	read-create	The value of tAdvCfgDescription specifies the description of this advanced configuration policy.
T/F tAdvCfgFastStart	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.14	TruthValue	read-create	The value of tAdvCfgFastStart specifies the whether fast detection of initial bandwidth on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStart is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
T/F tAdvCfgFastStop	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.15	TruthValue	read-create	The value of tAdvCfgFastStop specifies the whether fast detection of lack of offered rate on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStop is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
U32 tAdvCfgHiRateHoldTime	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.11	Unsigned32	read-create	The value of tAdvCfgHiRateHoldTime specifies the time period that the current offered rate should be maintained for a child policer or queue. When tAdvCfgHiRateHoldTime is set to '0', any currently configured hold time for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
TIM tAdvCfgLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.3	TimeStamp	read-only	The value of tAdvCfgLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 tAdvCfgMaxDecPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.9	Unsigned32	read-create	The value of tAdvCfgMaxDecPirPrcnt specifies the percentage of the child's administrative PIR that should be used as the decrement limit to offered rate change. When the value of tAdvCfgMaxDecPirPrcnt is set to '10000', any currently configured maximum decrement limit for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
TMA tAdvCfgMaxDecRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.10	TMaxDecRate	read-create	The value of tAdvCfgMaxDecRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate decrement limit value.
T/F tAdvCfgMinOnly	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.20	TruthValue	read-create	The value of tAdvCfgMinOnly specifies the system to interpret the increase in tAdvCfgChildAdminRate as a minimum offered rate. When the tAdvCfgFastStop is set to 'false', the system uses the specified increase in tAdvCfgChildAdmnPirPrcnt or tAdvCfgChildAdminRate as a minimum offered rate even for inactive queues or policers associated with tAdvCfgPolicyName.
U32 tAdvCfgOMGranPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.7	Unsigned32	read-create	The value of tAdvCfgOMGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the threshold sensitivity to offered rate. When the value of tAdvCfgOMGranPirPrcnt is set to '0', it restores the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
TAD tAdvCfgOMGranRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.8	TAdvCfgRate	read-create	The value of tAdvCfgOMGranRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate change sensitivity value. When the value of tAdvCfgOMGranRate is set to '0', the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName are restored.
tAdvCfgPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.27.6.1		not-accessible	Each row represents a particular configuration policy. Entries are created and deleted by the user.
TNA tAdvCfgPolicyName	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.1	TNamedItem	not-accessible	The value of tAdvCfgPolicyName specifies the name of the advanced configuration policy.
ROW tAdvCfgPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.2	RowStatus	read-create	The value of tAdvCfgPolicyRowStatus is used for the creation and deletion of advanced configuration policies.
tAdvCfgPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.27.6		not-accessible	The tAdvCfgPolicyTable has an entry for each configuration policy for queue and policer parameters configured on this system.
TIM tAdvCfgPolicyTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.100	TimeStamp	read-only	The value of tAdvCfgPolicyTblLastChgd indicates the timestamp of last change to the tAdvCfgPolicyTable.
U32 tAdvCfgSampleInterval	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.13	Unsigned32	read-create	The value of tAdvCfgSampleInterval specifies the interval for sampling the child's offered rate. A value of '1' of tAdvCfgSampleInterval represents fastest sampling rate available while a value of '8' represents slowest sampling period available. When tAdvCfgSampleInterval is set to '4', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
U32 tAdvCfgTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.12	Unsigned32	read-create	The value of tAdvCfgTimeAvgFactor is used the weight the new offered rate with a portion of the pervious offered rate. When tAdvCfgTimeAvgFactor is set to '0', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
U32 tAtmTdpCdvt	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12	Unsigned32	read-create	tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250
INT tAtmTdpCLPTagging	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14	INTEGER	read-create	tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one.
TIT tAtmTdpDescription	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8	TItemDescription	read-create	The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor.
TAT tAtmTdpDescrType	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11	TAtmTdpDescrType	read-create	tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr
tAtmTdpEntry	1.3.6.1.4.1.6527.3.1.2.16.21.1.1		not-accessible	This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero.
ATM tAtmTdpIndex	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1	AtmTrafficDescrParamIndex	not-accessible	This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext.
I32 tAtmTdpIndexNext	1.3.6.1.4.1.6527.3.1.2.16.21.2	Integer32	read-only	This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
TIM tAtmTdpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9	TimeStamp	read-only	tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table.
U32 tAtmTdpMbs	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4	Unsigned32	read-create	tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32
U32 tAtmTdpMir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5	Unsigned32	read-create	tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir.
tAtmTdpObjects	1.3.6.1.4.1.6527.3.1.2.16.21
U32 tAtmTdpPir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3	Unsigned32	read-create	tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0
INT tAtmTdpPolicing	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13	INTEGER	read-create	tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR
ROW tAtmTdpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10	RowStatus	read-create	tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported
I32 tAtmTdpsCurrentlyConfigured	1.3.6.1.4.1.6527.3.1.2.16.21.4	Integer32	read-only	This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system.
ATM tAtmTdpServCat	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7	AtmServiceCategory	read-create	tAtmTdpServCat determines the ATM service category.
INT tAtmTdpShaping	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6	INTEGER	read-create	tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.
U32 tAtmTdpSir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2	Unsigned32	read-create	tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir.
I32 tAtmTdpsMaxSupported	1.3.6.1.4.1.6527.3.1.2.16.21.3	Integer32	read-only	This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system.
tAtmTdpTable	1.3.6.1.4.1.6527.3.1.2.16.21.1		not-accessible	This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
TIM tAtmTdpTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.62	TimeStamp	read-only	tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table.
I32 tAtmTdpWeight	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.15	Integer32	read-create	The value of tAtmTdpWeight specifies the relative weight assigned to this ATM traffic descriptor with respect to ATM VP shaper scheduling. The value of tAtmTdpWeight is only relevant for MDA where the value of TIMETRA-CHASSIS-MIB::tmnxMDAAtmMode is equal to max16kVc, and is ignored otherwise. If the value of tAtmTdpWeight is not specified when the conceptual row is created, the weight is derived from the ATM service category: CBR 10 rt-VBR 7 nrt-VBR 5 UBR+ (nonzero MIR) 2 UBR (zero MIR) 1.
TDS tDSCPName	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1	TDSCPName	not-accessible	The name assigned to the DSCP Value.
TDS tDSCPNameDscpValue	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4	TDSCPValue	read-create	The DSCP Value.
tDSCPNameEntry	1.3.6.1.4.1.6527.3.1.2.16.1.1.1		not-accessible	Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.
TIM tDSCPNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tDSCPNameTable.
ROW tDSCPNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2	RowStatus	read-create	Row Status of the entry.
STO tDSCPNameStorageType	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3	StorageType	read-create	The storage type of this row in the table.
tDSCPNameTable	1.3.6.1.4.1.6527.3.1.2.16.1.1		not-accessible	A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
TIM tDSCPNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.5	TimeStamp	read-only	The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table.
tDSCPObjects	1.3.6.1.4.1.6527.3.1.2.16.1
TFC tFCName	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1	TFCName	not-accessible	Forwarding class name.
tFCNameEntry	1.3.6.1.4.1.6527.3.1.2.16.2.1.1		not-accessible	Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.
TIM tFCNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tFCNameTable.
tFCNameTable	1.3.6.1.4.1.6527.3.1.2.16.2.1		not-accessible	A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
TIM tFCNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.10	TimeStamp	read-only	The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table.
tFCObjects	1.3.6.1.4.1.6527.3.1.2.16.2
ROW tFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2	RowStatus	read-create	Row Status of the entry.
STO tFCStorageType	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3	StorageType	read-create	The storage type of this row in the table.
I32 tFCValue	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4	Integer32	read-create	FC Value.
U32 tHsmdaPoolClass1AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.15	Unsigned32	read-create	The value of tHsmdaPoolClass1AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass1Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass1Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.14	Unsigned32	read-create	The value of tHsmdaPoolClass1Parent specifies the root pool to which the first class pool will be associated.
U32 tHsmdaPoolClass2AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.17	Unsigned32	read-create	The value of tHsmdaPoolClass2AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass2Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass2Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.16	Unsigned32	read-create	The value of tHsmdaPoolClass2Parent specifies the root pool to which the second class pool will be associated.
U32 tHsmdaPoolClass3AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.19	Unsigned32	read-create	The value of tHsmdaPoolClass3AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass3Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass3Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.18	Unsigned32	read-create	The value of tHsmdaPoolClass3Parent specifies the root pool to which the third class pool will be associated.
U32 tHsmdaPoolClass4AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.21	Unsigned32	read-create	The value of tHsmdaPoolClass4AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass4Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass4Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.20	Unsigned32	read-create	The value of tHsmdaPoolClass4Parent specifies the root pool to which the fourth class pool will be associated.
U32 tHsmdaPoolClass5AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.23	Unsigned32	read-create	The value of tHsmdaPoolClass5AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass5Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass5Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.22	Unsigned32	read-create	The value of tHsmdaPoolClass5Parent specifies the root pool to which the fifth class pool will be associated.
U32 tHsmdaPoolClass6AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.25	Unsigned32	read-create	The value of tHsmdaPoolClass6AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass6Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass6Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.24	Unsigned32	read-create	The value of tHsmdaPoolClass6Parent specifies the root pool to which the sixth class pool will be associated.
U32 tHsmdaPoolClass7AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.27	Unsigned32	read-create	The value of tHsmdaPoolClass7AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass7Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass7Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.26	Unsigned32	read-create	The value of tHsmdaPoolClass7Parent specifies the root pool to which the seventh class pool will be associated.
U32 tHsmdaPoolClass8AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.29	Unsigned32	read-create	The value of tHsmdaPoolClass8AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass8Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass8Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.28	Unsigned32	read-create	The value of tHsmdaPoolClass8Parent specifies the root pool to which the eigth class pool will be associated.
TIT tHsmdaPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.4	TItemDescription	read-create	The value of tHsmdaPoolDescription specifies the description of this HSMDA pool policy.
TIM tHsmdaPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.3	TimeStamp	read-only	The value of tHsmdaPoolLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tHsmdaPoolPlcyTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.71	TimeStamp	read-only	tHsmdaPoolPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Pool Policy Table.
tHsmdaPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.3.1		not-accessible	Each row represents a particular HSMDA pool policy. Entries are created and deleted by the user.
TNA tHsmdaPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.1	TNamedItem	not-accessible	The value of tHsmdaPoolPolicyName specifies the name of the HSMDA pool policy.
ROW tHsmdaPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.2	RowStatus	read-create	The value of tHsmdaPoolPolicyRowStatus is used for the creation and deletion of HSMDA pool policies.
tHsmdaPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.3		not-accessible	The tHsmdaPoolPolicyTable has an entry for each HSMDA pool policy configured on this system.
TWE tHsmdaPoolRoot1AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.6	TWeight	read-create	The value of tHsmdaPoolRoot1AllocWeight specifies the weight that will be applied to the first root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot2AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.7	TWeight	read-create	The value of tHsmdaPoolRoot2AllocWeight specifies the weight that will be applied to the second root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot3AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.8	TWeight	read-create	The value of tHsmdaPoolRoot3AllocWeight specifies the weight that will be applied to the third root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot4AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.9	TWeight	read-create	The value of tHsmdaPoolRoot4AllocWeight specifies the weight that will be applied to the fourth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot5AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.10	TWeight	read-create	The value of tHsmdaPoolRoot5AllocWeight specifies the weight that will be applied to the fifth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot6AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.11	TWeight	read-create	The value of tHsmdaPoolRoot6AllocWeight specifies the weight that will be applied to the sixth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot7AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.12	TWeight	read-create	The value of tHsmdaPoolRoot7AllocWeight specifies the weight that will be applied to the seventh root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot8AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.13	TWeight	read-create	The value of tHsmdaPoolRoot8AllocWeight specifies the weight that will be applied to the eighth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
U32 tHsmdaPoolSystemReserve	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.5	Unsigned32	read-create	The value of tHsmdaPoolSystemReserve specifies the percentage of HSMDA buffers that will be reserved for internal system use. When this value is set, all the provisioned buffer pool allocation sizes will be re-evaluated. This includes the port class allocations specified by indirectly by tmnxPortIngPoolPercentRate and tmnxPortEgrPoolPercentRate, and class and root pools specified indirectly by tHsmdaPoolClass1AllocPercent through tHsmdaPoolClass8AllocPercent and tHsmdaPoolRoot1AllocWeight through tHsmdaPoolRoot8AllocWeight.
TIM tHsmdaSchedPlcyGrpTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.70	TimeStamp	read-only	tHsmdaSchedPlcyGrpTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Group Table.
TIM tHsmdaSchedPlcyTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.69	TimeStamp	read-only	tHsmdaSchedPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Table.
TCL tHsmdaSchedulerPlcyBrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.32	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyBrstLimit specifies the explicit shaping burst size for this HSMDA scheduler policy.
TIT tHsmdaSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.3	TItemDescription	read-create	The value of tHsmdaSchedulerPlcyDescription specifies the description of this HSMDA scheduling policy.
tHsmdaSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.4.1		not-accessible	Each row represents a particular HSMDA scheduler policy. Entries are created and deleted by the user.
TCL tHsmdaSchedulerPlcyGrp1BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.33	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyGrp1BrstLimit specifies the explicit shaping burst size for group 1 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyGrp1Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.30	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyGrp1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 1 for this HSMDA scheduler policy group.
TCL tHsmdaSchedulerPlcyGrp2BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.34	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyGrp2BrstLimit specifies the explicit shaping burst size for group 2 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyGrp2Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.31	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyGrp2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 2 for this HSMDA scheduler policy group.
TIM tHsmdaSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.29	TimeStamp	read-only	The value of tHsmdaSchedulerPlcyLastChanged indicates the timestamp of last change to this row in tHsmdaSchedulerPlcyTable.
TCL tHsmdaSchedulerPlcyLvl1BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.35	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl1BrstLimit specifies the explicit shaping burst size for level 1 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl1GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.6	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl1GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1Rate. Setting tHsmdaSchedulerPlcyLvl1GrpId to non-default value while tHsmdaSchedulerPlcyLvl1Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl1Rate being set to default. Setting tHsmdaSchedulerPlcyLvl1GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl1Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.5	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1GrpId. Setting tHsmdaSchedulerPlcyLvl1Rate to any value (including default) while tHsmdaSchedulerPlcyLvl1GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl1GrpId being set to default, and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl1WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.7	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl1WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl1GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl1GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl2BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.36	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl2BrstLimit specifies the explicit shaping burst size for level 2 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl2GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.9	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl2GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2Rate. Setting tHsmdaSchedulerPlcyLvl2GrpId to non-default value while tHsmdaSchedulerPlcyLvl2Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl2Rate being set to default. Setting tHsmdaSchedulerPlcyLvl2GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl2Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.8	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2GrpId. Setting tHsmdaSchedulerPlcyLvl2Rate to any value (including default) while tHsmdaSchedulerPlcyLvl2GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl2GrpId being set to default, and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl2WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.10	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl2WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl2GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl2GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl3BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.37	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl3BrstLimit specifies the explicit shaping burst size for level 3 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl3GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.12	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl3GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3Rate. Setting tHsmdaSchedulerPlcyLvl3GrpId to non-default value while tHsmdaSchedulerPlcyLvl3Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl3Rate being set to default. Setting tHsmdaSchedulerPlcyLvl3GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl3Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.11	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl3Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3GrpId. Setting tHsmdaSchedulerPlcyLvl3Rate to any value (including default) while tHsmdaSchedulerPlcyLvl3GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl3GrpId being set to default, and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl3WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.13	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl3WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl3GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl3GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl4BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.38	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl4BrstLimit specifies the explicit shaping burst size for level 4 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl4GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.15	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl4GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4Rate. Setting tHsmdaSchedulerPlcyLvl4GrpId to non-default value while tHsmdaSchedulerPlcyLvl4Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl4Rate being set to default. Setting tHsmdaSchedulerPlcyLvl4GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl4Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.14	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl4Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4GrpId. Setting tHsmdaSchedulerPlcyLvl4Rate to any value (including default) while tHsmdaSchedulerPlcyLvl4GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl4GrpId being set to default, and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl4WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.16	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl4WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl4GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl4GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl5BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.39	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl5BrstLimit specifies the explicit shaping burst size for level 5 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl5GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.18	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl5GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5Rate. Setting tHsmdaSchedulerPlcyLvl5GrpId to non-default value while tHsmdaSchedulerPlcyLvl5Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl5Rate being set to default. Setting tHsmdaSchedulerPlcyLvl5GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl5Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.17	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl5Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5GrpId. Setting tHsmdaSchedulerPlcyLvl5Rate to any value (including default) while tHsmdaSchedulerPlcyLvl5GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl5GrpId being set to default, and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl5WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.19	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl5WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl5GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl5GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl6BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.40	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl6BrstLimit specifies the explicit shaping burst size for level 6 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl6GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.21	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl6GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6Rate. Setting tHsmdaSchedulerPlcyLvl6GrpId to non-default value while tHsmdaSchedulerPlcyLvl6Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl6Rate being set to default. Setting tHsmdaSchedulerPlcyLvl6GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl6Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.20	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl6Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6GrpId. Setting tHsmdaSchedulerPlcyLvl6Rate to any value (including default) while tHsmdaSchedulerPlcyLvl6GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl6GrpId being set to default, and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl6WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.22	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl6WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl6GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl6GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl7BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.41	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl7BrstLimit specifies the explicit shaping burst size for level 7 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl7GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.24	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl7GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7Rate. Setting tHsmdaSchedulerPlcyLvl7GrpId to non-default value while tHsmdaSchedulerPlcyLvl7Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl7Rate being set to default. Setting tHsmdaSchedulerPlcyLvl7GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl7Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.23	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl7Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7GrpId. Setting tHsmdaSchedulerPlcyLvl7Rate to any value (including default) while tHsmdaSchedulerPlcyLvl7GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl7GrpId being set to default, and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl7WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.25	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl7WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl7GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl7GrpId is non-default.
TCL tHsmdaSchedulerPlcyLvl8BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.42	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl8BrstLimit specifies the explicit shaping burst size for level 8 of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl8GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.27	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl8GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8Rate. Setting tHsmdaSchedulerPlcyLvl8GrpId to non-default value while tHsmdaSchedulerPlcyLvl8Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl8Rate being set to default. Setting tHsmdaSchedulerPlcyLvl8GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl8Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.26	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl8Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8GrpId. Setting tHsmdaSchedulerPlcyLvl8Rate to any value (including default) while tHsmdaSchedulerPlcyLvl8GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl8GrpId being set to default, and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl8WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.28	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl8WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl8GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl8GrpId is non-default.
THS tHsmdaSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.4	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit, in megabits per second, of this HSMDA scheduler policy.
TNA tHsmdaSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.1	TNamedItem	not-accessible	The value of tHsmdaSchedulerPlcyName specifies the name of the HSMDA scheduler policy.
ROW tHsmdaSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.2	RowStatus	read-create	The value of tHsmdaSchedulerPlcyRowStatus is used for the creation and deletion of HSMDA scheduler policies.
tHsmdaSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.4		not-accessible	The tHsmdaSchedulerPlcyTable has an entry for each HSMDA scheduler policy configured on this system.
TIT tHsmdaSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.4	TItemDescription	read-create	The value of tHsmdaSlopeDescription specifies the description of this HSMDA slope policy.
TMN tHsmdaSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.6	TmnxEnabledDisabled	read-create	The value of tHsmdaSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tHsmdaSlopeHiAdminStatus is set to 'disabled', the RED slope is inactive.
U32 tHsmdaSlopeHiMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.8	Unsigned32	read-create	The value of tHsmdaSlopeHiMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tHsmdaSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.9	Unsigned32	read-create	The value of tHsmdaSlopeHiMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeHiMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeHiStartDepth up to the tHsmdaSlopeHiMaxProbability at the tHsmdaSlopeHiMaxDepth.
U32 tHsmdaSlopeHiStartDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.7	Unsigned32	read-create	The value of tHsmdaSlopeHiStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
TIM tHsmdaSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.3	TimeStamp	read-only	The value of tHsmdaSlopeLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TMN tHsmdaSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.10	TmnxEnabledDisabled	read-create	The value of tHsmdaSlopeLoAdminStatus specifies the admin state for the low priority RED slope. If the tHsmdaSlopeLoAdminStatus is set to 'disabled', the RED slope is inactive.
U32 tHsmdaSlopeLoMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.12	Unsigned32	read-create	The value of tHsmdaSlopeLoMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tHsmdaSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.13	Unsigned32	read-create	The value of tHsmdaSlopeLoMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeLoMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeLoStartDepth up to the tHsmdaSlopeLoMaxProbability at the tHsmdaSlopeLoMaxDepth.
U32 tHsmdaSlopeLoStartDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.11	Unsigned32	read-create	The value of tHsmdaSlopeLoStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
tHsmdaSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.2.1		not-accessible	Each row represents a particular HSMDA slope policy. Entries are created and deleted by the user.
TNA tHsmdaSlopePolicyName	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.1	TNamedItem	not-accessible	The value of tHsmdaSlopePolicyName specifies the name of the HSMDA slope policy.
ROW tHsmdaSlopePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.2	RowStatus	read-create	The value of tHsmdaSlopePolicyRowStatus is used for the creation and deletion of HSMDA slope policies.
tHsmdaSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.2		not-accessible	The tHsmdaSlopePolicyTable has an entry for each HSMDA slope policy configured on this system.
TIM tHsmdaSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.72	TimeStamp	read-only	tHsmdaSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Hsmda Slope Policy Table.
U32 tHsmdaSlopeQueueMbs	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.5	Unsigned32	read-create	The value of tHsmdaSlopeQueueMbs specifies the maximum amount of buffer space, in bytes, allowed for any HSMDA queue associated with this HSMDA slope policy. Specifying a value of 0 effectively disables all queues associated with this slope policy causing each queue to discard all packets. This object is obsoleted in 10.0 Release.
THS tHsmdaWrrPolicyAggWeightAtClass	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.7	THsmdaWeightClass	read-create	The value of tHsmdaWrrPolicyAggWeightAtClass specifies the weight assigned to the group of queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
TIT tHsmdaWrrPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.4	TItemDescription	read-create	The value of tHsmdaWrrPolicyDescription specifies the description of the Weighted Round Robin (WRR) policy on this HSMDA queue.
tHsmdaWrrPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.28.1.1		not-accessible	Each row in tHsmdaWrrPolicyEntry represents a HSMDA Weighted Round Robin (WRR) policy specified by tHsmdaWrrPolicyName.
THS tHsmdaWrrPolicyIncludeQueues	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.5	THsmdaPolicyIncludeQueues	read-create	The value of tHsmdaWrrPolicyIncludeQueues specifies the queues that can be scheduled in the same class in a Weighted Round Robin (WRR) fashion within the HSMDA scheduler.
TIM tHsmdaWrrPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.3	TimeStamp	read-only	The value of tHsmdaWrrPolicyLastChanged indicates the sysUpTime for the last change to this row.
TNA tHsmdaWrrPolicyName	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.1	TNamedItem	not-accessible	The value of tHsmdaWrrPolicyName specifies the name of the Weighted Round Robin (WRR) policy associated with this HSDMA queue.
ROW tHsmdaWrrPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.2	RowStatus	read-create	The value of tHsmdaWrrPolicyRowStatus is used for the creation and deletion of entries in the tHsmdaWrrPolicyTable.
THS tHsmdaWrrPolicySchedUsingClass	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.6	THsmdaPolicyScheduleClass	read-create	The value of tHsmdaWrrPolicySchedUsingClass specifies which class to schedule the queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
tHsmdaWrrPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.28.1		not-accessible	The tHsmdaWrrPolicyTable contains the information of the Weighted Round Robin (WRR) policies configured on HSDMA queues.
TIM tHsmdaWrrPolicyTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.93	TimeStamp	read-only	The value of tHsmdaWrrPolicyTblLastChgd indicates the timestamp of last change to the tHsmdaWrrPolicyTable.
timetraQosMIBModule	1.3.6.1.4.1.6527.1.1.3.16			This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel-Lucent SROS systems. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tMcFrEgrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.26.3.1		not-accessible	Each entry contains information about a particular frame-relay egress multi-class class per multi-class frame-relay egress profile. Entries are created/destroyed as each tMcFrEgrProfEntry is created/destroyed.
TMN tMcFrEgrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.1	TmnxMcFrClassIndex	not-accessible	The value of tMcFrEgrClassIndex specifies a specific frame-relay egress class per multi-class frame-relay egress profile.
TIM tMcFrEgrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.5	TimeStamp	read-only	The value of tMcFrEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
U32 tMcFrEgrClassMaxSize	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.4	Unsigned32	read-write	The value of tMcFrEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcFrEgrClassIndex value. Currently only four multi-class classes are supported per profile.
U32 tMcFrEgrClassMir	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.2	Unsigned32	read-write	The value of tMcFrEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
tMcFrEgrClassTable	1.3.6.1.4.1.6527.3.1.2.16.26.3		not-accessible	The tMcFrEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
TIM tMcFrEgrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.83	TimeStamp	read-only	The value of tMcFrEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 tMcFrEgrClassWeight	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.3	Unsigned32	read-write	The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
tMcFrEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.26
TIT tMcFrEgrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.2	TItemDescription	read-create	The value of tMcFrEgrProfDescription holds the description for this profile.
tMcFrEgrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.26.1.1		not-accessible	Each row entry contains information about a particular egress multi-class frame-relay profile. Multi-class frame-relay egress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
TMC tMcFrEgrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.1	TMcFrQoSProfileId	not-accessible	The value of tMcFrEgrProfIndex specifies a specific multi-class egress profile.
TIM tMcFrEgrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.3	TimeStamp	read-only	The value of tMcFrEgrProfLastChanged indicates the sysUpTime for the last change to this row.
ROW tMcFrEgrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.4	RowStatus	read-create	The value of tMcFrEgrProfRowStatus controls the creation and deletion of rows in this table.
tMcFrEgrProfTable	1.3.6.1.4.1.6527.3.1.2.16.26.1		not-accessible	The tMcFrEgrProfTable has an entry for each egress multi-class frame-relay profile configured in the system.
TIM tMcFrEgrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.82	TimeStamp	read-only	The value of tMcFrEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tMcFrIngrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.25.2.1		not-accessible	Each entry contains information about a particular frame-relay ingress multi-class class per frame-relay ingress profile. Entries are created/destroyed as each tMcFrIngrProfEntry is created/destroyed.
TMN tMcFrIngrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.1	TmnxMcFrClassIndex	not-accessible	The value of tMcFrIngrClassIndex specifies a specific frame-relay ingress class per multi-class frame-relay ingress profile.
TIM tMcFrIngrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.3	TimeStamp	read-only	The value of tMcFrIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
U32 tMcFrIngrClassReassemblyTmout	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.2	Unsigned32	read-write	The value of tMcFrIngrClassReassemblyTmout specifies the reassembly timeout for a specific frame-relay multi-class ingress class. Currently only four multi-class classes are supported per profile.
tMcFrIngrClassTable	1.3.6.1.4.1.6527.3.1.2.16.25.2		not-accessible	The tMcFrIngrClassTable has an entry for each multi-class frame-relay ingress class per multi-class frame-relay ingress profile in the system.
TIM tMcFrIngrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.81	TimeStamp	read-only	The value of tMcFrIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tMcFrIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.25
TIT tMcFrIngrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.2	TItemDescription	read-create	The value of tMcFrIngrProfDescription holds the description for this profile.
tMcFrIngrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.25.1.1		not-accessible	Each row entry contains information about a particular ingress multi-class frame-relay profile. Multi-class frame-relay ingress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
TMC tMcFrIngrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.1	TMcFrQoSProfileId	not-accessible	The value of tMcFrIngrProfIndex specifies a specific multi-class ingress profile.
TIM tMcFrIngrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.3	TimeStamp	read-only	The value of tMcFrIngrProfTable indicates the sysUpTime for the last change to this row.
ROW tMcFrIngrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.4	RowStatus	read-create	The value of tMcFrIngrProfRowStatus controls the creation and deletion of rows in this table.
tMcFrIngrProfTable	1.3.6.1.4.1.6527.3.1.2.16.25.1		not-accessible	The tMcFrIngrProfTable has an entry for each ingress multi-class frame-relay profile configured in the system.
TIM tMcFrIngrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.80	TimeStamp	read-only	The value of tMcFrIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tMcMlpppEgrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.24.3.1		not-accessible	Each entry contains information about a particular mlppp egress multi-class class per mlppp multi-class mlppp egress profile. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
TMN tMcMlpppEgrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.1	TmnxMcMlpppClassIndex	not-accessible	The value of tMcMlpppEgrClassIndex specifies a specific mlppp egress class per multi-class mlppp egress profile.
TIM tMcMlpppEgrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.5	TimeStamp	read-only	The value of tMcMlpppEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
U32 tMcMlpppEgrClassMaxSize	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.4	Unsigned32	read-write	The value of tMcMlpppEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Max Size 0 25 1 5 2 200 3 1000
U32 tMcMlpppEgrClassMir	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.2	Unsigned32	read-write	The value of tMcMlpppEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. The default Mir is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Mir Value 0 100 1 85 2 0 3 0
tMcMlpppEgrClassTable	1.3.6.1.4.1.6527.3.1.2.16.24.3		not-accessible	The tMcMlpppEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
TIM tMcMlpppEgrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.78	TimeStamp	read-only	The value of tMcMlpppEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
U32 tMcMlpppEgrClassWeight	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.3	Unsigned32	read-write	The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. The default Weight is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Weight Value 0 0 1 0 2 66 3 33
tMcMlpppEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.24
U32 tMcMlpppEgrFCClass	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.2	Unsigned32	read-write	The value of tMcMlpppEgrFCClass specifies the mlppp multi-class class for the per-forwarding-class specified. The default class value is determined by the Forwarding Class Name. Forwarding Class Name Mlppp Class Value be 3 l2 2 af 2 l1 2 h2 2 ef 1 h1 0 nc 0
tMcMlpppEgrFCEntry	1.3.6.1.4.1.6527.3.1.2.16.24.4.1		not-accessible	Each entry contains information about all egress FC Mappings to multi-class mlppp classes. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
TIM tMcMlpppEgrFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.3	TimeStamp	read-only	The value of tMcMlpppEgrFCLastChanged indicates the sysUpTime for the last change to this entry.
TFC tMcMlpppEgrFCName	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.1	TFCName	not-accessible	The value tMcMlpppEgrFCName specifies of the name of the forwarding class.
tMcMlpppEgrFCTable	1.3.6.1.4.1.6527.3.1.2.16.24.4		not-accessible	The tMcMlpppEgrFCTable has an entry for all egress FC Mappings to multi-class mlppp classes.
TIM tMcMlpppEgrFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.79	TimeStamp	read-only	The value of tMcMlpppEgrFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tMcMlpppEgrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.2	TItemDescription	read-create	The value of tMcMlpppEgrProfDescription holds the description for this profile.
tMcMlpppEgrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.24.1.1		not-accessible	Each row entry contains information about a particular egress multi-class mlppp profile. Multi-class mlppp egress profiles 1,2 and 3 are created by the agent. They cannot be deleted. Other entries are created by the user.
TML tMcMlpppEgrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.1	TMlpppQoSProfileId	not-accessible	The value of tMcMlpppEgrProfIndex specifies a specific multi-class egress profile.
TIM tMcMlpppEgrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.3	TimeStamp	read-only	The value of tMcMlpppEgrProfLastChanged indicates the sysUpTime for the last change to this row.
ROW tMcMlpppEgrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.4	RowStatus	read-create	The value of tMcMlpppEgrProfRowStatus controls the creation and deletion of rows in this table.
tMcMlpppEgrProfTable	1.3.6.1.4.1.6527.3.1.2.16.24.1		not-accessible	The tMcMlpppEgrProfTable has an entry for each egress multi-class mlppp profile configured in the system.
TIM tMcMlpppEgrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.77	TimeStamp	read-only	The value of tMcMlpppEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tMcMlpppIngrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.23.2.1		not-accessible	Each entry contains information about a particular mlppp ingress multi-class class per mlppp ingress profile. Entries are created/destroyed as each tMcMlpppIngrProfEntry is created/destroyed.
TMN tMcMlpppIngrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.1	TmnxMcMlpppClassIndex	not-accessible	The value of tMcMlpppIngrClassIndex specifies a specific mlppp ingress class per multi-class mlppp ingress profile.
TIM tMcMlpppIngrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.3	TimeStamp	read-only	The value of tMcMlpppIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
U32 tMcMlpppIngrClassReassemblyTmout	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.2	Unsigned32	read-write	The value of tMcMlpppIngrClassReassemblyTmout specifies the reassembly timeout for a specific mlppp multi-class ingress class. The default reassembly timeout value is determined by the tMcMlpppIngrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppIngrClassIndex Default Reassembly Value 0 10 1 10 2 100 3 1000
tMcMlpppIngrClassTable	1.3.6.1.4.1.6527.3.1.2.16.23.2		not-accessible	The tMcMlpppIngrClassTable has an entry for each multi-class mlppp ingress class per multi-class mlppp ingress profile in the system.
TIM tMcMlpppIngrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.76	TimeStamp	read-only	The value of tMcMlpppIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tMcMlpppIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.23
TIT tMcMlpppIngrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.2	TItemDescription	read-create	The value of tMcMlpppIngrProfDescription holds the description for this profile.
tMcMlpppIngrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.23.1.1		not-accessible	Each row entry contains information about a particular ingress multi-class mlppp profile. Multi-class mlppp ingress profile 1 is created by the agent. It cannot be deleted. Other entries are created by the user.
TML tMcMlpppIngrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.1	TMlpppQoSProfileId	not-accessible	The value of tMcMlpppIngrProfIndex specifies a specific multi-class ingress profile.
TIM tMcMlpppIngrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.3	TimeStamp	read-only	The value of tMcMlpppIngrProfTable indicates the sysUpTime for the last change to this row.
ROW tMcMlpppIngrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.4	RowStatus	read-create	The value of tMcMlpppIngrProfRowStatus controls the creation and deletion of rows in this table.
tMcMlpppIngrProfTable	1.3.6.1.4.1.6527.3.1.2.16.23.1		not-accessible	The tMcMlpppIngrProfTable has an entry for each ingress multi-class mlppp profile configured in the system.
TIM tMcMlpppIngrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.75	TimeStamp	read-only	The value of tMcMlpppIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tmnxQos7450V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.17			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R10.0.
tmnxQos7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.4			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R4.0.
tmnxQos7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.6			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R5.0.
tmnxQos7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.8			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.0.
tmnxQos7450V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.10			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
tmnxQos7450V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.12			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
tmnxQos7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.14			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R8.0.
tmnxQos7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.5			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R4.0.
tmnxQos7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.7			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R5.0.
tmnxQos7750V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.9			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.0.
tmnxQos77x0V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.18			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R10.0.
tmnxQos77x0V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.11			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.1.
tmnxQos77x0V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.13			The compliance statement for management of QOS features on Alcatel-Lucent 7750 SROS series systems release R6.1.
tmnxQos77x0V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.15			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R8.0.
tmnxQos77x0V9v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.16			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R9.0.
tmnxQosAdvConfigV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.64			The group of objects supporting management of QoS policer and queue advanced configuration parameters on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosAtmTdpV3v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.15			The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 3.0.
tmnxQosAtmTdpV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.24			The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 5.0.
tmnxQosAtmTdpV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.55			The group of objects for ATM Traffic Descriptor Profiles added in release 9.0 of SROS.
tmnxQosBurstLimitGroup	1.3.6.1.4.1.6527.3.1.1.16.2.50			The group of objects supporting Burst-size management objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosCompliances	1.3.6.1.4.1.6527.3.1.1.16.1
tmnxQosConformance	1.3.6.1.4.1.6527.3.1.1.16
tmnxQosDSCPGroup	1.3.6.1.4.1.6527.3.1.1.16.2.2			The group of objects supporting management of Differential Services Code Points on Alcatel-Lucent SROS series systems.
tmnxQosEgrReClassifyV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.62			The group of objects supporting management of QoS Egress policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.3			The group of objects supporting management of Forwarding Classes on Alcatel-Lucent SROS series systems.
tmnxQosFrameBasedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.28			The group of objects supporting management of frame-based queue accounting on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosGlobalGroup	1.3.6.1.4.1.6527.3.1.1.16.2.1			The group of objects supporting general management of QOS features on Alcatel-Lucent SROS series systems.
tmnxQosGroups	1.3.6.1.4.1.6527.3.1.1.16.2
tmnxQosHsmdaObsoletedV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.69			The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosHsmdaObsoletedV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.59			The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosHsmdaV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.65			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosHsmdaV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.23			The group of objects supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosHsmdaV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.36			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 7.0.
tmnxQosHsmdaV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.56			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosMacCritVidFltrV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.51			The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosMcFrEgrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.39			The group of objects for the multi-class Fr egress information on Alcatel-Lucent SROS series systems.
tmnxQosMcFrIngrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.38			The group of objects for the multi-class Fr ingress information on Alcatel-Lucent SROS series systems.
tmnxQosMcMlpppEgrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.32			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosMcMlpppIngrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.31			The group of objects for the multi-class mlppp ingress information on Alcatel-Lucent SROS series systems.
tmnxQosNamedPoolPolicyV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.30			The group of objects for the named pool policy on Alcatel-Lucent SROS series systems.
tmnxQosNamedPoolV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.58			The group of objects supporting management of Network Named Pool policies on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosNetworkR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.13			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.66			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosNetworkV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.22			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.27			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.35			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.57			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosObsoletedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.29			The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosObsoletedV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.47			The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosPolicerSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.63			The group of objects supporting management of QoS policer slope on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosPolicerV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.42			The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 8.0.
tmnxQosPolicerV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.54			The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosPolicyV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.60			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosPortSchPlcyGrpGroup	1.3.6.1.4.1.6527.3.1.1.16.2.48			The group of objects supporting Port Scheduler Policy Group objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosQueueGrpPolcrV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.61			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosQueueObjGroup	1.3.6.1.4.1.6527.3.1.1.16.2.33			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosQueueObjV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.46			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosQueueV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.18			The group of objects supporting management of QoS queue policies on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSapAtmV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.37			The group of objects supporting management of SAP ATM related QoS policies for Alcatel-Lucent SROS series systems release 7.0.
tmnxQosSapEgressR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.12			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.21			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.26			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.45			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.52			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosSapEgrQWredGroup	1.3.6.1.4.1.6527.3.1.1.16.2.40			The group of objects for the WRED specific SAP egress queue information on Alcatel-Lucent SROS series systems.
tmnxQosSapIngressV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.68			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosSapIngressV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.19			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSapIngressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.25			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosSapIngressV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.41			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 8.0.
tmnxQosSapIngressV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.53			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosSapIpv6FilterR4r0Group	1.3.6.1.4.1.6527.3.1.1.16.2.16			The group of objects for Qos Policies related to IPv6 on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSchedulerGroup	1.3.6.1.4.1.6527.3.1.1.16.2.8			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSchedulerV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.20			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSchedulerV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.49			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.7			The group of objects supporting management of Slope policies on Alcatel-Lucent SROS series systems.
TIT tNamedPoolPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4	TItemDescription	read-create	The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy.
tNamedPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.1.1		not-accessible	This list contains Named buffer pools policy related information.
TIM tNamedPoolPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3	TimeStamp	read-only	The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified.
TNA tNamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1	TNamedItem	not-accessible	The value of tNamedPoolPolicyName indicates the name of Named pool policy.
U32 tNamedPoolPolicyQ1DefaultWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5	Unsigned32	read-create	The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools.
U32 tNamedPoolPolicyQ1MdaWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6	Unsigned32	read-create	The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools.
U32 tNamedPoolPolicyQ1PortWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7	Unsigned32	read-create	The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools.
ROW tNamedPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2	RowStatus	read-create	The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies.
tNamedPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.1		not-accessible	This table contains information on Named buffer pools policy.
TIM tNamedPoolPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.73	TimeStamp	read-only	The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tNetworkEgrDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.102	TimeStamp	read-only	The value of tNetworkEgrDSCPTableLastChanged indicates the timestamp of last change to the tNetworkEgressDSCPTable.
TDS tNetworkEgressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.1	TDSCPName	not-accessible	The value of tNetworkEgressDSCP indicates the DSCP value for which the mapping is done. It is used as a secondary index for tNetworkEgressDSCPTable.
tNetworkEgressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.9.1		not-accessible	The tNetworkEgressDSCPEntry defines a particular DSCP entry for a network egress policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. In the event that one policy has multiple entries, and the tNetworkEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tNetworkEgressDSCP).
TFC tNetworkEgressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.4	TFCName	read-create	The value of tNetworkEgressDSCPFC will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TIM tNetworkEgressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.3	TimeStamp	read-only	The value of tNetworkEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TPR tNetworkEgressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.5	TProfile	read-create	The value of tNetworkEgressDSCPProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressDSCPProfile. It must be set at the time of row creation.
ROW tNetworkEgressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.2	RowStatus	read-create	The value of tNetworkEgressDSCPRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressDSCPProfile must be specified when row is created.
tNetworkEgressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.9		not-accessible	tNetworkEgressDSCPTable lists all DSCP entries for all network egress policies.
T/F tNetworkEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10	TruthValue	read-write	The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.
DOT tNetworkEgressFCDot1pInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6	Dot1PPriority	read-write	the Dot1p to use for in-profile traffic.
DOT tNetworkEgressFCDot1pOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7	Dot1PPriority	read-write	the Dot1p to use for out-of-profile traffic.
TDS tNetworkEgressFCDSCPInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2	TDSCPNameOrEmpty	read-write	the DSCP to use for in-profile traffic.
TDS tNetworkEgressFCDSCPOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3	TDSCPNameOrEmpty	read-write	the DSCP to use for out-of-profile traffic.
tNetworkEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.7.1		not-accessible	Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TDE tNetworkEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9	TDEValue	read-write	The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.
TIM tNetworkEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8	TimeStamp	read-only	timestamp of last change to this row in tNetworkEgressFCTable.
TLS tNetworkEgressFCLspExpInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4	TLspExpValue	read-write	the lsp-exp value to use for in-profile traffic.
TLS tNetworkEgressFCLspExpOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5	TLspExpValue	read-write	the lsp-exp value to use for out-of-profile traffic.
TFC tNetworkEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1	TFCName	not-accessible	the name of the forwarding class (FC).
TEG tNetworkEgressFCQGrpPolicer	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.12	TEgrPolicerIdOrNone	read-write	The value of tNetworkEgressFCQGrpPolicer specifies the policer from queue-group to be used for packets in this forwarding class.
TEG tNetworkEgressFCQGrpQueue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.11	TEgressQueueId	read-write	tNetworkEgressFCQGrpQueue specifies the specific queue from queue-group TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this forwarding class.
tNetworkEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.7		not-accessible	Information about all network policies' egress FC traffic disposition.
TIM tNetworkEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.43	TimeStamp	read-only	tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table.
tNetworkEgressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.5.10.1		not-accessible	The tNetworkEgressPrecEntry defines a particular network egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user.
TFC tNetworkEgressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.4	TFCName	read-create	The value of tNetworkEgressPrecFC will overwrite the forwarding class derived from egress. The new forwarding class is used for egress remarking and queue mapping decisions.
TIM tNetworkEgressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.3	TimeStamp	read-only	The value of tNetworkEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TPR tNetworkEgressPrecProfile	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.5	TProfile	read-create	The value of tNetworkEgressPrecProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the egress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressPrecProfile. It must be set at the time of row creation.
ROW tNetworkEgressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.2	RowStatus	read-create	The value of tNetworkEgressPrecRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressPrecProfile must be specified when row is created.
tNetworkEgressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.5.10		not-accessible	The tNetworkEgressPrecTable table maintains the mapping of a particular precedence value into a forwarding class
TPR tNetworkEgressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.1	TPrecValue	not-accessible	The value of tNetworkEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tNetworkEgressPrecTable.
TEG tNetworkEgrHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.1	TEgressHsmdaQueueId	not-accessible	The value of tNetworkEgrHsmdaQueue indicates the HSMDA queue ID used as the secondary index to the table entry.
THS tNetworkEgrHsmdaQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.8	THSMDAQueueBurstLimit	read-write	The value of tNetworkEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
tNetworkEgrHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.4.1		not-accessible	Each entry in tNetworkEgrHsmdaQueueEntry represents the information about a particular HSMDA queue for a network egress policy specified by tNetworkEgrHsmdaQueue.
TIM tNetworkEgrHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.7	TimeStamp	read-only	The value of tNetworkEgrHsmdaQueueLastChanged indicates the sysUpTime for the last change to this row.
THS tNetworkEgrHsmdaQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.5	THSMDABurstSizeBytes	read-write	The value of tNetworkEgrHsmdaQueueMBS specifies the maximum amount of buffer space, in bytes, allowed for this network egress HSMDA queue.
TAD tNetworkEgrHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.3	TAdaptationRule	read-write	The value of tNetworkEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
U32 tNetworkEgrHsmdaQueuePIRPercent	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.2	Unsigned32	read-write	The value of tNetworkEgrHsmdaQueuePIRPercent specifies the queue's PIR expressed as a percentage of port line rate.
TNA tNetworkEgrHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.6	TNamedItem	read-write	The value of tNetworkEgrHsmdaQueueSlopePolicy specifies the slope policy on this network egress HSMDA queue. The slope policy defines the WRED slope behavior for this queue.
tNetworkEgrHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.4		not-accessible	The tNetworkEgrHsmdaQueueTable contains the information about all network egress policies on HSMDA queues. Entries in this table are created whenever a network queue policy is created in tNetworkQueuePolicyEntry.
TIM tNetworkEgrHsmdaQueueTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.94	TimeStamp	read-only	The value of tNetworkEgrHsmdaQueueTblLastChgd indicates the timestamp of last change to this row in tNetworkEgrHsmdaQueueTable.
THS tNetworkEgrHsmdaQueueWrrWeight	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.4	THsmdaWrrWeight	read-write	The value of tNetworkEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
TIM tNetworkEgrPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.103	TimeStamp	read-only	The value of tNetworkEgrPrecTableLastChanged indicates the timestamp of last change to the tNetworkEgressPrecTable.
tNetworkIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.5.3.1		not-accessible	Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3	TFCName	read-create
TIM tNetworkIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDot1pTable.
TDE tNetworkIngressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4	TDEProfileOrDei	read-create	there is no DEFVAL for this object. It must be deliberately set before activating the row.
ROW tNetworkIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2	RowStatus	read-create
tNetworkIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.5.3		not-accessible
TIM tNetworkIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.44	TimeStamp	read-only	tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table.
DOT tNetworkIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1	Dot1PPriority	not-accessible
TDS tNetworkIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1	TDSCPName	not-accessible
tNetworkIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.2.1		not-accessible	Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3	TFCName	read-create
TIM tNetworkIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDSCPTable.
TPR tNetworkIngressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
ROW tNetworkIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2	RowStatus	read-create
tNetworkIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.2		not-accessible
TIM tNetworkIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.41	TimeStamp	read-only	tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table.
tNetworkIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.8.1		not-accessible	Information about a particular network policy's ingress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TIM tNetworkIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.2	TimeStamp	read-only	The value of tNetworkIngressFCLastChanged indicates the sysUpTime for the last change to this entry.
TIN tNetworkIngressFCMultiCastPlcr	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.3	TIngPolicerIdOrNone	read-write	The value of tNetworkIngressFCMultiCastPlcr specifies the policer to be used for multicast traffic for this forwarding-class.
TFC tNetworkIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.1	TFCName	not-accessible	The value of tNetworkIngressFCName specifies the name of the forwarding class (FC).
tNetworkIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.8		not-accessible	Information about all network policies' ingress FC traffic disposition.
TIM tNetworkIngressFCTableLstChanged	1.3.6.1.4.1.6527.3.1.2.16.20.101	TimeStamp	read-only	The value of tNetworkIngressFCTableLstChanged indicates the timestamp of last change to the tNetworkIngressFCTable.
TIN tNetworkIngressFCUniCastPlcr	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.4	TIngPolicerIdOrNone	read-write	The value of tNetworkIngressFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding-class.
TLS tNetworkIngressLSPEXP	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1	TLspExpValue	not-accessible
tNetworkIngressLSPEXPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.4.1		not-accessible	Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressLSPEXPFC	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3	TFCName	read-create
TIM tNetworkIngressLSPEXPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressLSPEXPTable.
TPR tNetworkIngressLSPEXPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
ROW tNetworkIngressLSPEXPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2	RowStatus	read-create
tNetworkIngressLSPEXPTable	1.3.6.1.4.1.6527.3.1.2.16.5.4		not-accessible
TIM tNetworkIngressLSPEXPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.42	TimeStamp	read-only	tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table.
tNetworkObjects	1.3.6.1.4.1.6527.3.1.2.16.5
TIT tNetworkPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6	TItemDescription	read-create	tNetworkPolicyDescription holds the description for this policy.
T/F tNetworkPolicyEgressRemark	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9	TruthValue	read-create	The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.
T/F tNetworkPolicyEgressRemarkDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.12	TruthValue	read-create	The value of tNetworkPolicyEgressRemarkDscp object specifies whether DSCP bits in the internal IP header should be remarked. This object is valid only when tNetworkPolicyEgressRemark is set to 'true'.
tNetworkPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.5.1.1		not-accessible	Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.
TNE tNetworkPolicyIndex	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1	TNetworkPolicyID	not-accessible
TFC tNetworkPolicyIngressDefaultActionFC	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7	TFCName	read-create	tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.
TPR tNetworkPolicyIngressDefaultActionProfile	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8	TProfileOrDei	read-create	tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.
T/F tNetworkPolicyIngressLerUseDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11	TruthValue	read-create	The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.
TIM tNetworkPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10	TimeStamp	read-only	Timestamp of last change to this row in tNetworkPolicyTable.
ROW tNetworkPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2	RowStatus	read-create
TIT tNetworkPolicyScope	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5	TItemScope	read-create
tNetworkPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.5.1		not-accessible
TIM tNetworkPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.40	TimeStamp	read-only	tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table.
TQU tNetworkQueue	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1	TQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
TBU tNetworkQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
TRA tNetworkQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11	TRatePercent	read-create	The percentage of max rate allowed.
TAD tNetworkQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23	TAdaptationRule	read-create	The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TLE tNetworkQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tNetworkQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
tNetworkQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.2.1		not-accessible
INT tNetworkQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10	INTEGER	read-create	tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TQU tNetworkQueueFC	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3	TQueueId	read-create	The specific queue to be used for packets in this forwarding class.
TQU tNetworkQueueFCEgrHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.8	TQueueId	read-create	The value of tNetworkQueueFCEgrHsmdaQueue specifies the egress hsmda queue to be used for packets in this forwarding class. This is only applicable on supported hsmda ports.
tNetworkQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.6.3.1		not-accessible
TIM tNetworkQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7	TimeStamp	read-only	timestamp of last change to this row in tNetworkQueueFCTable.
TQU tNetworkQueueFCMCast	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4	TQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.
TFC tNetworkQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1	TFCName	not-accessible	Forwarding class name.
ROW tNetworkQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2	RowStatus	read-create	Row Status for this queue.
tNetworkQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.6.3		not-accessible
TIM tNetworkQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.52	TimeStamp	read-only	tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table.
TBU tNetworkQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tNetworkQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16	TimeStamp	read-only	The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.
TLE tNetworkQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TBU tNetworkQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
T/F tNetworkQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9	TruthValue	read-create	This object specifies if this is a multicast queue or not.
tNetworkQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.6
TNA tNetworkQueueParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TPI tNetworkQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12	TPIRRatePercent	read-create	The percentage of max rate allowed.
TAD tNetworkQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24	TAdaptationRule	read-create	The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TNA tNetworkQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1	TNamedItem	not-accessible
TIT tNetworkQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3	TItemDescription	read-create
TPE tNetworkQueuePolicyEHPktBOffst	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.10	TPerPacketOffset	read-create	The value of tNetworkQueuePolicyEHPktBOffst specifies the packet byte offset to use for the HSMDA egress queues. This value is used for the adjustment to make to the size of each packet for HSMDA queue accounting.
TNA tNetworkQueuePolicyEHWrrPlcy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.9	TNamedItemOrEmpty	read-create	The value of tNetworkQueuePolicyEHWrrPlcy specifies the Weighted Round Robin (WRR) policy to use on this HSMDA egress queue.
tNetworkQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.6.1.1		not-accessible
TIM tNetworkQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8	TimeStamp	read-only
ROW tNetworkQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2	RowStatus	read-create
tNetworkQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.6.1		not-accessible
TIM tNetworkQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.50	TimeStamp	read-only	tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table.
TNA tNetworkQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3	TNamedItemOrEmpty	read-create	The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.
U32 tNetworkQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22	Unsigned32	read-create	The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
TLE tNetworkQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20	TLevelOrDefault	read-create	The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tNetworkQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21	TWeight	read-create	The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tNetworkQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18	TLevel	read-create	The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tNetworkQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19	TWeight	read-create	The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
ROW tNetworkQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
tNetworkQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.2		not-accessible
TIM tNetworkQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.51	TimeStamp	read-only	tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table.
T/F tNetworkQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17	TruthValue	read-create	The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.
TWE tNetworkQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
tPoolObjects	1.3.6.1.4.1.6527.3.1.2.16.22
TIT tPortSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3	TItemDescription	read-create	The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler.
tPortSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.3.1		not-accessible	Each row represents a particular port scheduler. Entries are created and deleted by the user.
TIM tPortSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4	TimeStamp	read-only	The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TPO tPortSchedulerPlcyLvl1CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1.
TPO tPortSchedulerPlcyLvl1PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1.
TPO tPortSchedulerPlcyLvl2CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2.
TPO tPortSchedulerPlcyLvl2PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2.
TPO tPortSchedulerPlcyLvl3CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3.
TPO tPortSchedulerPlcyLvl3PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3.
TPO tPortSchedulerPlcyLvl4CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4.
TPO tPortSchedulerPlcyLvl4PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4.
TPO tPortSchedulerPlcyLvl5CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5.
TPO tPortSchedulerPlcyLvl5PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5.
TPO tPortSchedulerPlcyLvl6CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6.
TPO tPortSchedulerPlcyLvl6PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6.
TPO tPortSchedulerPlcyLvl7CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7.
TPO tPortSchedulerPlcyLvl7PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7.
TPO tPortSchedulerPlcyLvl8CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8.
TPO tPortSchedulerPlcyLvl8PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8.
TPO tPortSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler.
TNA tPortSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1	TNamedItem	not-accessible	The value of tPortSchedulerPlcyName specifies the name of the port scheduler.
TLE tPortSchedulerPlcyOrphanCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24	TLevelOrDefault	read-create	The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir.
TWE tPortSchedulerPlcyOrphanCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25	TWeight	read-create	The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir.
TLE tPortSchedulerPlcyOrphanLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22	TLevel	read-create	The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir.
TWE tPortSchedulerPlcyOrphanWeight	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23	TWeight	read-create	The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir.
ROW tPortSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2	RowStatus	read-create	The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies.
tPortSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.3		not-accessible	The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
TPO tPortSchPlcyGrpAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.5	TPortSchedulerCIR	read-create	The value of tPortSchPlcyGrpAdminCIR specifies the within-cir bandwidth limit of this port scheduler group.
TPO tPortSchPlcyGrpAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.4	TPortSchedulerPIRRate	read-create	The value of tPortSchPlcyGrpAdminPIR specifies the total bandwidth limit, Admin PIR of this port scheduler group.
tPortSchPlcyGrpEntry	1.3.6.1.4.1.6527.3.1.2.16.12.5.1		not-accessible	Each row represents a particular port scheduler group. Entries are created and deleted by the user.
TIM tPortSchPlcyGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.3	TimeStamp	read-only	The value of tPortSchPlcyGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TNA tPortSchPlcyGrpName	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.1	TNamedItem	not-accessible	The value of tPortSchPlcyGrpName specifies the name of the port scheduler group.
ROW tPortSchPlcyGrpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.2	RowStatus	read-create	The value of tPortSchPlcyGrpRowStatus is used for the creation and deletion of port scheduler policies.
tPortSchPlcyGrpTable	1.3.6.1.4.1.6527.3.1.2.16.12.5		not-accessible	The tPortSchPlcyGrpTable has an entry for each port scheduler group configured on this system.
TIM tPortSchPlcyGrpTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.91	TimeStamp	read-only	tPortSchPlcyGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyGrpTable.
TNA tPortSchPlcyLvl1GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.2	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl1GrpName specifies the group associated with this scheduler policy for priority level set to '1'.
TNO tPortSchPlcyLvl1GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.10	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl1GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl1GrpName is set to a default value.
TNA tPortSchPlcyLvl2GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.3	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl2GrpName specifies the group associated with this scheduler policy for priority level set to '2'.
TNO tPortSchPlcyLvl2GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.11	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl2GrpWeight specifies the weight associated with the group tPortSchPlcyLvl2GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl2GrpName is set to a default value.
TNA tPortSchPlcyLvl3GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.4	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl3GrpName specifies the group associated with this scheduler policy for priority level set to '3'.
TNO tPortSchPlcyLvl3GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.12	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl3GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl3GrpName is set to a default value.
TNA tPortSchPlcyLvl4GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.5	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl4GrpName specifies the group associated with this scheduler policy for priority level set to '4'.
TNO tPortSchPlcyLvl4GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.13	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl4GrpWeight specifies the weight associated with the group tPortSchPlcyLvl4GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl4GrpName is set to a default value.
TNA tPortSchPlcyLvl5GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.6	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl5GrpName specifies the group associated with this scheduler policy for priority level set to '5'.
TNO tPortSchPlcyLvl5GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.14	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl5GrpWeight specifies the weight associated with the group tPortSchPlcyLvl5GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl5GrpName is set to a default value.
TNA tPortSchPlcyLvl6GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.7	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl6GrpName specifies the group associated with this scheduler policy for priority level set to '6'.
TNO tPortSchPlcyLvl6GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.15	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl6GrpWeight specifies the weight associated with the group tPortSchPlcyLvl6GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl6GrpName is set to a default value.
TNA tPortSchPlcyLvl7GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.8	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl7GrpName specifies the group associated with this scheduler policy for priority level set to '7'.
TNO tPortSchPlcyLvl7GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.16	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl7GrpWeight specifies the weight associated with the group tPortSchPlcyLvl7GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl7GrpName is set to a default value.
TNA tPortSchPlcyLvl8GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.9	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl8GrpName specifies the group associated with this scheduler policy for priority level set to '8'.
TNO tPortSchPlcyLvl8GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.17	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl8GrpWeight specifies the weight associated with the group tPortSchPlcyLvl8GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl8GrpName is set to a default value.
tPortSchPlcyLvlGrpEntry	1.3.6.1.4.1.6527.3.1.2.16.12.6.1		not-accessible	Each row represents a particular port scheduler specific priority level group information.
TIM tPortSchPlcyLvlGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.1	TimeStamp	read-only	The value of tPortSchPlcyLvlGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
tPortSchPlcyLvlGrpTable	1.3.6.1.4.1.6527.3.1.2.16.12.6		not-accessible	The tPortSchPlcyLvlGrpTable has an entry for each port scheduler configured on this system for priority level group objects.
TIM tPortSchPlcyLvlGrpTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.92	TimeStamp	read-only	tPortSchPlcyLvlGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyLvlGrpTable.
U32 tQ1NamedPoolAccessAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7	Unsigned32	read-create	The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools.
I32 tQ1NamedPoolAmbrAlrmThresh	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.12	Integer32	read-create	The value of tQ1NamedPoolAmbrAlrmThresh specifies the threshold for the amber alarm on the over-subscription allowed.
TIT tQ1NamedPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5	TItemDescription	read-create	The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool.
tQ1NamedPoolEntry	1.3.6.1.4.1.6527.3.1.2.16.22.2.1		not-accessible	This list contains Q1 pools policy related information.
TIM tQ1NamedPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4	TimeStamp	read-only	The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified.
TNA tQ1NamedPoolName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2	TNamedItem	not-accessible	The value of tQ1NamedPoolName indicates the name of the existing pool within the policy.
U32 tQ1NamedPoolNetworkAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6	Unsigned32	read-create	The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools.
TNA tQ1NamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1	TNamedItem	not-accessible	The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy.
I32 tQ1NamedPoolRedAlrmThresh	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.13	Integer32	read-create	The value of tQ1NamedPoolRedAlrmThresh specifies the threshold for the red alarm on the over-subscription allowed.
I32 tQ1NamedPoolReservedCbs	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9	Integer32	read-create	The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
I32 tQ1NamedPoolResvCbsAmbrAlrmMax	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.11	Integer32	read-create	The value of tQ1NamedPoolResvCbsAmbrAlrmMax specifies the maximum percentage for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmMax is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmMax MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmStep. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared. Max reserved CBS must not be more than the reserved CBS.
I32 tQ1NamedPoolResvCbsAmbrAlrmStep	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.10	Integer32	read-create	The value of tQ1NamedPoolResvCbsAmbrAlrmStep specifies the percentage step-size for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmStep is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmStep MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmMax. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
ROW tQ1NamedPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3	RowStatus	read-create	The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools.
TNA tQ1NamedPoolSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8	TNamedItemOrEmpty	read-create	The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool.
tQ1NamedPoolTable	1.3.6.1.4.1.6527.3.1.2.16.22.2		not-accessible	This table contains information on Q1 pools policy.
TIM tQ1NamedPoolTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.74	TimeStamp	read-only	The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQosDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.1	TimeStamp	read-only	The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain.
THP tQosEgrPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11	THPolCIRRate	read-create	tQosEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
THP tQosEgrPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10	THPolPIRRate	read-create	tQosEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
TNA tQosEgrPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23	TNamedItemOrEmpty	read-create	The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TPL tQosEgrPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12	TPlcrBurstSizeBytes	read-create	tQosEgrPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
TAD tQosEgrPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TIT tQosEgrPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4	TItemDescription	read-create	tQosEgrPolicerDescr specifies the description of the policer.
tQosEgrPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.27.5.1		not-accessible	tQosEgrPolicerEntry defines an entry in the tQosEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosEgrPolicerRowStatus.
TBU tQosEgrPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14	TBurstPercentOrDefault	read-create	tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
TEG tQosEgrPolicerId	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1	TEgrPolicerId	not-accessible	tQosEgrPolicerId defines the Egress Queue Group Policer identifier. It identifies an egress queue group policer in the managed system.
TIM tQosEgrPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3	TimeStamp	read-only	tQosEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TLE tQosEgrPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8	TLevel	read-create	tQosEgrPolicerLevel specifies the level of priority while feeding the parent.
TPL tQosEgrPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13	TPlcrBurstSizeBytes	read-create	tQosEgrPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
TNA tQosEgrPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7	TNamedItemOrEmpty	read-create	tQosEgrPolicerParent specifies the arbiter to which this policer would be feeding
TAD tQosEgrPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPE tQosEgrPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15	TPerPacketOffset	read-create	tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
T/F tQosEgrPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16	TruthValue	read-create	The value of tQosEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tQosEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
ROW tQosEgrPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2	RowStatus	read-create	tQosEgrPolicerRowStatus allows entries to be created and deleted in the tQosEgrPolicerTable.
TMN tQosEgrPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22	TmnxSlopeMap	read-create	The value of tQosEgrPolicerSlopeMap specifies the slope map to be used with this policer.
U32 tQosEgrPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20	Unsigned32	read-create	The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tQosEgrPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21	Unsigned32	read-create	The value of tQosEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosEgrPolicerSlopeStartDepth up to the tQosEgrPolicerSlopeMaxProb at the tQosEgrPolicerSlopeMaxDepth.
U32 tQosEgrPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18	Unsigned32	read-create	The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
TMN tQosEgrPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17	TmnxEgrPolicerStatMode	read-create	tQosEgrPolicerStatMode specifies the mode of statistics collected by this policer.
tQosEgrPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.27.5		not-accessible	tQosEgrPolicerTable defines QOS egress Policer Table for providing, via SNMP, the capability of defining the policers in the egress queue groups. tQosEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within Qos policies.
TIM tQosEgrPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.98	TimeStamp	read-only	tQosEgrPolicerTableLastChanged indicates the timestamp of last change to the tQosEgrPolicerTable.
TPO tQosEgrPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9	TPolicerWeight	read-create	tQosEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TIT tQosEgrQGroupDescr	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.4	TItemDescription	read-create	tQosEgrQGroupDescr specifies the description of the queue-group.
tQosEgrQGroupEntry	1.3.6.1.4.1.6527.3.1.2.16.7.6.1		not-accessible	tQosEgrQGroupEntry defines an entry in the tQosEgrQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosEgrQGroupRowStatus.
tQosEgrQGroupFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.8.1		not-accessible	Information about a particular queue group's forwarding class.
TIM tQosEgrQGroupFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.3	TimeStamp	read-only	The value of tQosEgrQGroupFCLastChanged indicates the timestamp of last change to this row in tQosEgrQGroupFCTable.
TFC tQosEgrQGroupFCName	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.1	TFCName	not-accessible	The value of the object tQosEgrQGroupFCName specifies the name of the forwarding class
TEG tQosEgrQGroupFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.4	TEgressQueueId	read-create	The value of tQosEgrQGroupFCQueue specifies the queue to be used for the packets in this forwarding class.
ROW tQosEgrQGroupFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.2	RowStatus	read-create	The value of tQosEgrQGroupFCRowStatus specifies the Row Status for this entry.
tQosEgrQGroupFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.8		not-accessible	This table maintains the information of forwarding classes in a egress queue group.
TIM tQosEgrQGroupFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.90	TimeStamp	read-only	The value of tQosEgrQGroupFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQosEgrQGroupFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQosEgrQGroupLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.3	TimeStamp	read-only	tQosEgrQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TNA tQosEgrQGroupName	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.1	TNamedItem	not-accessible	tQosEgrQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
ROW tQosEgrQGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.2	RowStatus	read-create	tQosEgrQGroupRowStatus allows entries to be created and deleted in the tQosEgrQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
tQosEgrQGroupTable	1.3.6.1.4.1.6527.3.1.2.16.7.6		not-accessible	tQosEgrQGroupTable defines the Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosEgrQueueTable. tQosEgrQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
TIM tQosEgrQGroupTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.8	TimeStamp	read-only	tQosEgrQGroupTableLastChanged indicates the timestamp of last change to the tQosEgrQGroupTable.
TIM tQosEgrQTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.9	TimeStamp	read-only	tQosEgrQTableLastChanged indicates the timestamp of last change to the tQosEgrQueueTable.
TEG tQosEgrQueue	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.1	TEgressQueueId	not-accessible	The value of tQosEgrQueue identifies the queue index which is used as the second index to the table entry. Zero is not allowed.
TCI tQosEgrQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.15	TCIRRate	read-create	The value of tQosEgrQueueAdminCIR specifies the administrative CIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
U32 tQosEgrQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.29	Unsigned32	read-create	The value of tQosEgrQueueAdminCIRPercent specifies the administrative CIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
TPI tQosEgrQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.14	TPIRRate	read-create	The value of tQosEgrQueueAdminPIR specifies the administrative PIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
U32 tQosEgrQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.28	Unsigned32	read-create	The value of tQosEgrQueueAdminPIRPercent specifies the administrative PIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
TNA tQosEgrQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.32	TNamedItemOrEmpty	read-create	The value of tQosEgrQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TBU tQosEgrQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.31	TBurstLimit	read-create	The value of tQosEgrQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tQosEgrQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.9	TBurstSize	read-create	The value of tQosEgrQueueCBS specifies the amount of reserved buffer space for the queue.
TAD tQosEgrQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.13	TAdaptationRule	read-create	The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TLE tQosEgrQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.6	TLevelOrDefault	read-create	The value of tQosEgrQueueCIRLevel specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tQosEgrQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.7	TWeight	read-create	The value of tQosEgrQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
tQosEgrQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.7.1		not-accessible	tQosEgrQueueEntry defines a particular egress queue. Entries are created and deleted by user.
INT tQosEgrQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.8	INTEGER	read-create	The value of tQosEgrQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers.
TBU tQosEgrQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.11	TBurstPercentOrDefault	read-create	The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tQosEgrQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.18	TimeStamp	read-only	The value of tQosEgrQueueLastChanged indicates the timestamp of last change to this row in tQosEgrQueueTable.
TLE tQosEgrQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.4	TLevel	read-create	The value of tQosEgrQueueLevel specifies the level of priority while feeding the parent.
TBU tQosEgrQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.10	TBurstSize	read-create	The value of tQosEgrQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosEgrQueueMBSBytes object.
TBU tQosEgrQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.27	TBurstSizeBytes	read-create	The value of tQosEgrQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
TNA tQosEgrQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.3	TNamedItemOrEmpty	read-create	The value of tQosEgrQueueParent specifies the scheduler to which this queue would be feeding.
TAD tQosEgrQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.12	TAdaptationRule	read-create	The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPE tQosEgrQueuePktOffset	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.33	TPerPacketOffset	read-create	The value of tQosEgrQueuePktOffset specifies the packet byte offset to be applied with this queue.
TNA tQosEgrQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.24	TNamedItemOrEmpty	read-create	The value of tQosEgrQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
TLE tQosEgrQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.22	TLevelOrDefault	read-create	The value of the object tQosEgrQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tQosEgrQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.23	TWeight	read-create	The value of the object tQosEgrQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tQosEgrQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.20	TLevel	read-create	The value of the object tQosEgrQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tQosEgrQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.21	TWeight	read-create	The value of the object tQosEgrQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TRA tQosEgrQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.30	TRateType	read-create	The value of tQosEgrQueueRateType specifies the type of Egress queue rate. When the value of the object is set to 'kbps', the egresss queue rates are specified in kbps. The objects tQosEgrQueueAdminCIRPercent and tQosEgrQueueAdminPIRPercent will be set to their default values. When the value of the object is set to 'percent', the egress queue rates are specified in percentage. The objects tQosEgrQueueAdminCIR and tQosEgrQueueAdminPIR will be set to their default values.
ROW tQosEgrQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.2	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
tQosEgrQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.7		not-accessible	tQosEgrQueueTable defines all egress queues.
T/F tQosEgrQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.19	TruthValue	read-create	The value of tQosEgrQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tQosEgrQueueParent. Only one kind of parent is allowed.
TWE tQosEgrQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.5	TWeight	read-create	The value of tQosEgrQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
T/F tQosEgrQueueXPWredQ	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.25	TruthValue	read-create	The value of tQosEgrQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
TNA tQosEgrQueueXPWredQSlope	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.26	TNamedItem	read-create	The value of tQosEgrQueueXPWredQSlope specifies the name of the slope-policy to be applied for QOS egress queue. When tQosEgrQueueXPWredQ has the value 'false', an 'inconsistentValue' error is returned if an attempt is made to set this object to a value other than 'default'.
tQosFCQGrpFC8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.44			The group of objects for the SAP egress information on Alcatel-Lucent SROS series systems.
THP tQosIngPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.11	THPolCIRRate	read-create	tQosIngPolicerAdminCIR specifies the administrative CIR specified by the user.
THP tQosIngPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10	THPolPIRRate	read-create	tQosIngPolicerAdminPIR specifies the administrative PIR specified by the user.
TNA tQosIngPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.22	TNamedItemOrEmpty	read-create	The value of tQosIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TPL tQosIngPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.12	TPlcrBurstSizeBytes	read-create	tQosIngPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
TAD tQosIngPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TIT tQosIngPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.4	TItemDescription	read-create	tQosIngPolicerDescr specifies the description of the policer.
tQosIngPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.27.4.1		not-accessible	tQosIngPolicerEntry defines an entry in the tQosIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosIngPolicerRowStatus.
TBU tQosIngPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.14	TBurstPercentOrDefault	read-create	tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
TIN tQosIngPolicerId	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.1	TIngPolicerId	not-accessible	tQosIngPolicerId defines the Ingress Queue Group Policer identifier. It identifies an ingress queue group policer in the managed system.
TIM tQosIngPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.3	TimeStamp	read-only	tQosIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TLE tQosIngPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.8	TLevel	read-create	tQosIngPolicerLevel specifies the level of priority while feeding the parent.
TPL tQosIngPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.13	TPlcrBurstSizeBytes	read-create	tQosIngPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
TNA tQosIngPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.7	TNamedItemOrEmpty	read-create	tQosIngPolicerParent specifies the arbiter to which this policer would be feeding.
TAD tQosIngPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPE tQosIngPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.15	TPerPacketOffset	read-create	tQosIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
T/F tQosIngPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.16	TruthValue	read-create	The value of tQosIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tQosIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
ROW tQosIngPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.2	RowStatus	read-create	tQosIngPolicerRowStatus allows entries to be created and deleted in the tQosIngPolicerTable.
TMN tQosIngPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.21	TmnxSlopeMap	read-create	The value of tQosIngPolicerSlopeMap specifies the slope map to be used with this policer.
U32 tQosIngPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.19	Unsigned32	read-create	The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tQosIngPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.20	Unsigned32	read-create	The value of tQosIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosIngPolicerSlopeStartDepth up to the tQosIngPolicerSlopeMaxProb at the tQosIngPolicerSlopeMaxDepth.
U32 tQosIngPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18	Unsigned32	read-create	The value of tQosIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
TMN tQosIngPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.17	TmnxIngPolicerStatMode	read-create	tQosIngPolicerStatMode specifies the mode of statistics collected by this policer.
tQosIngPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.27.4		not-accessible	tQosIngPolicerTable defines QOS Ingress Policer Table for providing, via SNMP, the capability of defining the policers in the ingress queue groups. tQosIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the Qos policies.
TIM tQosIngPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.97	TimeStamp	read-only	tQosIngPolicerTableLastChanged indicates the timestamp of last change to the tQosIngPolicerTable.
TPO tQosIngPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.9	TPolicerWeight	read-create	tQosIngPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding
TIT tQosIngQGroupDescr	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.4	TItemDescription	read-create	tQosIngQGroupDescr specifies the description of the queue-group.
tQosIngQGroupEntry	1.3.6.1.4.1.6527.3.1.2.16.7.4.1		not-accessible	tQosIngQGroupEntry defines an entry in the tQosIngQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosIngQGroupRowStatus.
TIM tQosIngQGroupLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.3	TimeStamp	read-only	tQosIngQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TNA tQosIngQGroupName	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.1	TNamedItem	not-accessible	tQosIngQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
ROW tQosIngQGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.2	RowStatus	read-create	tQosIngQGroupRowStatus allows entries to be created and deleted in the tQosIngQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
tQosIngQGroupTable	1.3.6.1.4.1.6527.3.1.2.16.7.4		not-accessible	tQosIngQGroupTable defines Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosIngQueueTable. tQosIngQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
TIM tQosIngQGroupTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.6	TimeStamp	read-only	tQosIngQGroupTableLastChanged indicates the timestamp of last change to the tQosIngQGroupTable.
TIM tQosIngQTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.7	TimeStamp	read-only	tQosIngQTableLastChanged indicates the timestamp of last change to the tQosIngQueueTable.
TIN tQosIngQueue	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.1	TIngressQueueId	not-accessible	tQosIngQueue specifies the queue ID which is used as the secondary index to the table entry.
TCI tQosIngQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.16	TCIRRate	read-create	tQosIngQueueAdminCIR specifies the administrative CIR specified by the user.
TPI tQosIngQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.15	TPIRRate	read-create	tQosIngQueueAdminPIR specifies the administrative PIR specified by the user.
TNA tQosIngQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.23	TNamedItemOrEmpty	read-create	The value of tQosIngQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TBU tQosIngQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.22	TBurstLimit	read-create	The value of tQosIngQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tQosIngQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.10	TBurstSize	read-create	tQosIngQueueCBS specifies the amount of reserved buffer space for the queue.
TAD tQosIngQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.14	TAdaptationRule	read-create	tQosIngQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TLE tQosIngQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.6	TLevelOrDefault	read-create	tQosIngQueueCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tQosIngQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.7	TWeight	read-create	tQosIngQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
tQosIngQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.5.1		not-accessible	tQosIngQueueEntry defines a particular ingress queue. Entries are created by user by setting tQosIngQueueRowStatus.
INT tQosIngQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.9	INTEGER	read-create	tQosIngQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tQosIngQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.12	TBurstPercentOrDefault	read-create	tQosIngQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tQosIngQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.17	TimeStamp	read-only	tQosIngQueueLastChanged specifies the timestamp of last change to this row in tQosIngQueueTable.
TLE tQosIngQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.4	TLevel	read-create	tQosIngQueueLevel specifies the level of priority while feeding the parent.
TBU tQosIngQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.11	TBurstSize	read-create	tQosIngQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosIngQueueMBSBytes object.
TBU tQosIngQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.21	TBurstSizeBytes	read-create	tQosIngQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
T/F tQosIngQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.8	TruthValue	read-create	tQosIngQueueMCast specifies if this is a multicast queue.
TQU tQosIngQueueMode	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.19	TQueueMode	read-create	tQosIngQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TNA tQosIngQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.3	TNamedItemOrEmpty	read-create	tQosIngQueueParent specifies the scheduler to which this queue would be feeding.
TAD tQosIngQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.13	TAdaptationRule	read-create	tQosIngQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
T/F tQosIngQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.18	TruthValue	read-create	tQosIngQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tQosIngQueuePoliced overrides the bandwidth specified by the object tQosIngQueueAdminCIR.
TNA tQosIngQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.20	TNamedItemOrEmpty	read-create	tQosIngQueuePoolName specifies the name of the pool to be applied for the ingress queue.
ROW tQosIngQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.2	RowStatus	read-create	tQosIngQueueRowStatus is the Row-Status of the entry. This allows creation/deletion of rows in this table.
tQosIngQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.5		not-accessible	tQosIngQueueTable defines all ingress queues.
TWE tQosIngQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.5	TWeight	read-create	tQosIngQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
tQosNotifications	1.3.6.1.4.1.6527.3.1.3.16.0
tQosNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.16
tQosObjects	1.3.6.1.4.1.6527.3.1.2.16
tQosObsoleteObjectsGroup	1.3.6.1.4.1.6527.3.1.1.16.2.10			The group of obsolete objects in the TIMETRA-QOS-MIB.
TIT tQosPolicerArbiterDescr	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.5	TItemDescription	read-create	The value of tQosPolicerArbiterDescr specifies the description for the policer control policy arbiter for the given tier.
tQosPolicerArbiterEntry	1.3.6.1.4.1.6527.3.1.2.16.27.3.1		not-accessible	tQosPolicerArbiterEntry defines a particular policy arbiter for a specific QoS policer control policy on a given tier. Entries are created and deleted by user.
TIM tQosPolicerArbiterLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.4	TimeStamp	read-only	The value of tQosPolicerArbiterLastChgd indicates the timestamp of last change to this row in tQosPolicerArbiterTable.
TLE tQosPolicerArbiterLevel	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.8	TLevel	read-create	tQosPolicerArbiterLevel specifies the level of priority while feeding the parent.
TNA tQosPolicerArbiterName	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.2	TNamedItem	not-accessible	The value of tQosPolicerArbiterName identifies the name of the policer control policy arbiter.
TNA tQosPolicerArbiterParent	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.7	TNamedItemOrEmpty	read-create	tQosPolicerArbiterParent specifies the scheduler to which this queue would be feeding.
THP tQosPolicerArbiterRate	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.6	THPolPIRRate	read-create	The value of tQosPolicerArbiterRate specifies the maximum frame based bandwidth limit of this policer control policy arbiter for the given tier.
ROW tQosPolicerArbiterRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.3	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
tQosPolicerArbiterTable	1.3.6.1.4.1.6527.3.1.2.16.27.3		not-accessible	tQosPolicerArbiterTable defines policy arbiters for all policer control policies.
TIM tQosPolicerArbiterTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.89	TimeStamp	read-only	tQosPolicerArbiterTblLastChgd indicates the timestamp of last change to the tQosPolicerArbiterTable.
INT tQosPolicerArbiterTier	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.1	INTEGER	not-accessible	The value of tQosPolicerArbiterTier identifies the tier of the policer control policy arbiter.
TPO tQosPolicerArbiterWeight	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.9	TPolicerWeight	read-create	tQosPolicerArbiterWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TIT tQosPolicerCtrlPolDescr	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.4	TItemDescription	read-create	The value of tQosPolicerCtrlPolDescr specifies the description for the policer control policy.
tQosPolicerCtrlPolEntry	1.3.6.1.4.1.6527.3.1.2.16.27.1.1		not-accessible	tQosPolicerCtrlPolEntry defines a particular egress queue. Entries are created and deleted by user.
TIM tQosPolicerCtrlPolLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.3	TimeStamp	read-only	The value of tQosPolicerCtrlPolLastChgd indicates the timestamp of last change to this row in tQosPolicerCtrlPolTable.
TPL tQosPolicerCtrlPolMinMBSSep	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.6	TPlcrBurstSizeBytes	read-create	The value of tQosPolicerCtrlPolMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer.
TNA tQosPolicerCtrlPolName	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.1	TNamedItem	not-accessible	The value of tQosPolicerCtrlPolName identifies the name of the policer control policy.
T/F tQosPolicerCtrlPolProfPref	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.7	TruthValue	read-create	The value of tQosPolicerCtrlPolProfPref specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer. When the value of this object is set to 'true', preferred profile is applied to this policy. When the value is set to 'false', no preffered profile is set to this policy.
THP tQosPolicerCtrlPolRootMaxRate	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.5	THPolPIRRate	read-create	The value of tQosPolicerCtrlPolRootMaxRate specifies the maximum frame based bandwidth limit of this policer.
ROW tQosPolicerCtrlPolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.2	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
tQosPolicerCtrlPolTable	1.3.6.1.4.1.6527.3.1.2.16.27.1		not-accessible	tQosPolicerCtrlPolTable defines all egress queues.
TIM tQosPolicerCtrlPolTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.87	TimeStamp	read-only	tQosPolicerCtrlPolTblLastChgd indicates the timestamp of last change to the tQosPolicerCtrlPolTable.
TLE tQosPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.1	TLevel	not-accessible	The value of tQosPolicerLevel identifies the level of the policer control policy defined by tQosPolicerCtrlPolName.
TPL tQosPolicerLevelCumMBS	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.3	TPlcrBurstSizeBytes	read-create	The value of tQosPolicerLevelCumMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by this policer.
tQosPolicerLevelEntry	1.3.6.1.4.1.6527.3.1.2.16.27.2.1		not-accessible	tQosPolicerLevelEntry defines a specific level of QoS policer control policy defined by tQosPolicerCtrlPolTable. Entries are created and deleted by the system when QoS policer control policy is created and deleted.
T/F tQosPolicerLevelFixedMBS	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.4	TruthValue	read-create	The value of tQosPolicerLevelFixedMBS specifies whether the cumulative buffer space is fixed for this level. When the value of this object is set to 'true', cumulative buffer space for this level is fixed. When the value is set to 'false', cumulative buffer space for this level is not fixed.
TIM tQosPolicerLevelLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.2	TimeStamp	read-only	The value of tQosPolicerLevelLastChgd indicates the timestamp of last change to this row in tQosPolicerLevelTable.
tQosPolicerLevelTable	1.3.6.1.4.1.6527.3.1.2.16.27.2		not-accessible	tQosPolicerLevelTable defines all levels of QoS Policer control policy defined by tQosPolicerCtrlPolTable.
TIM tQosPolicerLevelTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.88	TimeStamp	read-only	tQosPolicerLevelTblLastChgd indicates the timestamp of last change to the tQosPolicerLevelTable.
tQosPolicerObjects	1.3.6.1.4.1.6527.3.1.2.16.27
tQosQGrpFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.34			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tQosQGrpV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.43			The group of objects supporting the management of QOS Queue Groups on Alcatel-Lucent SROS series systems release 8.0.
tQosTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.16.20
TIT tSapEgressDescription	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4	TItemDescription	read-create	user-supplied description of this sap-egress policy.
tSapEgressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.4.10.1		not-accessible	Information about a particular dot1p match for a sap-egress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TNA tSapEgressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.4	TNamedItemOrEmpty	read-create	The value of tSapEgressDot1pFC specifies the forwarding class to be used to classify all the traffic that matches the Dot1p value specified by tSapEgressDot1pValue. Unless tSapEgressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
TIM tSapEgressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.3	TimeStamp	read-only	The value of tSapEgressDot1pLastChanged indicates the sysUpTime at the time of the last modification of this entry.
TPR tSapEgressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.5	TProfileUseDEOrNone	read-create	The value of tSapEgressDot1pProfile specifies the profile to use for packets that match the dot1p value specified by tSapEgressDot1pValue.
ROW tSapEgressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.2	RowStatus	read-create	tSapEgressDot1pRowStatus allows entries to be created and deleted in the tSapEgressDot1pTable.
tSapEgressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.4.10		not-accessible	A table that contains the list of all dot1p entries for all sap-egress policies.
TIM tSapEgressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.99	TimeStamp	read-only	tSapEgressDot1pTableLastChanged indicates the timestamp of last change to the tSapEgressDot1pTable.
DOT tSapEgressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.1	Dot1PPriority	not-accessible	The value of tSapEgressDot1pValue specifies the dotp value to match in the packet. This value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
TDS tSapEgressDSCP	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.1	TDSCPName	not-accessible
tSapEgressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.4.5.1		not-accessible	Information about a particular DSCP entry for a sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapEgressDSCP).
TFC tSapEgressDSCPfc	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.5	TFCNameOrEmpty	read-create	The value of tSapEgressDSCPfc, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
NUM tSapEgressDSCPHsmdaCntrOverride	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.4	TEgressHsmdaCounterIdOrZero	read-create	The value of the object tSapEgressDSCPHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapEgressDSCP. A value of zero implies that the default counters should be used.
TIM tSapEgressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.3	TimeStamp	read-only	The value of tSapEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TPR tSapEgressDSCPprofile	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.6	TProfileOrNone	read-create	The value of tSapEgressDSCPprofile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
ROW tSapEgressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.2	RowStatus	read-create	The value of tSapEgressDSCPRowStatus controls the creation/deletion of rows in this table.
tSapEgressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.4.5		not-accessible	a list of all DSCP entries for all sap-egress policies.
tSapEgressEntry	1.3.6.1.4.1.6527.3.1.2.16.4.1.1		not-accessible	Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.
T/F tSapEgressEthernetCtag	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.11	TruthValue	read-create	The value of tSapEgressEthernetCtag specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy. The value 'true' specifies that the top customer tag will be used for egress reclassification based on dot1p criteria. The value 'false' specifies that a service delimiting tag will be used for egress reclassification based on dot1p criteria.
T/F tSapEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11	TruthValue	read-create	The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.
T/F tSapEgressFCDot1PHsmdaProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.7	TruthValue	read-create	The value of the object tSapEgressFCDot1PHsmdaProfile specifies if the system will perform egress profiling on HSMDA queues or not. The tSapEgressFCDot1PHsmdaProfile object is obsoleted in 9.0 Release.
DOT tSapEgressFCDot1PInProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8	Dot1PPriority	read-create	The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.
DOT tSapEgressFCDot1POutProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9	Dot1PPriority	read-create	The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.
DOT tSapEgressFCDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4	Dot1PPriority	read-create	The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.
tSapEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.4.3.1		not-accessible	Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TDE tSapEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10	TDEValue	read-create	The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.
TEG tSapEgressFCHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.6	TEgressHsmdaQueueId	read-create	The HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA.
TNA tSapEgressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12	TNamedItemOrEmpty	read-create	The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TPR tSapEgressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14	TPrecValueOrNone	read-create	The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TIM tSapEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressFCTable.
TFC tSapEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1	TFCName	not-accessible	forwarding class name.
TNA tSapEgressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13	TNamedItemOrEmpty	read-create	The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TPR tSapEgressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15	TPrecValueOrNone	read-create	The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TEG tSapEgressFCPolicer	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.17	TEgrPolicerIdOrNone	read-create	The value of tSapEgressFCPolicer specifies the SAP Egress Policer identifier. If a corresponding Sap Egress Policer Id does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error will be returned. When tSapEgressFCPolicer is set to its default value, then traffic for this forwarding class will not use policers. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to default, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a system determined queue-group queue. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a queue within the given queue-group according to the appropriate tQosEgrQGroupFCEntry. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given queue within the given queue-group. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set its default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given local queue.
TNA tSapEgressFCQGrp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.16	TNamedItemOrEmpty	read-create	The value of tSapEgressFCQGrp specifies the tQosEgrQGroupName. When set to a non-default value, this indicates the name of the queue-group to which traffic will be forwarded.
TFC tSapEgressFCQGrpFC	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.18	TFCNameOrEmpty	read-create	The value of tSapEgressFCQGrpFC, when specified, will replace the forwarding class derived from ingress as the forwarding class to use inside the egress queue group. tSapEgressFCQGrpFC is only allowed to be used in conjunction with egress policers, and is mutually exclusive with direct queue-group queue mappings. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC is set to a non-default value when tSapEgressFCPolicer is set to default.
TEG tSapEgressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3	TEgressQueueId	read-create	The queue to use for packets in this forwarding class. When tSapEgressFCQGrp is set to its default value, tSapEgressFCQueue represents the local queue to which traffic will be forwarded. When tSapEgressFCQGrp is set to a non-default value, tSapEgressFCQueue represents the queue within the specified queue-group to which traffic will be forwarded.
ROW tSapEgressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2	RowStatus	read-create	Row Status for this queue.
tSapEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.4.3		not-accessible
TIM tSapEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.32	TimeStamp	read-only	tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table.
U32 tSapEgressHsmdaLowBrstMaxCls	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.9	Unsigned32	read-create	The value of tSapEgressHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. All classes starting from 1, up to and including that specified by tSapEgressHsmdaLowBrstMaxCls use the low priority burst threshold. All classes greater than the value of tSapEgressHsmdaLowBrstMaxCls up to and including class 8 use the high priority burst threshold.
TEG tSapEgressHsmdaPacketOffset	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.6	TEgressHsmdaPerPacketOffset	read-create	The value of tSapEgressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting.
TEG tSapEgressHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.1	TEgressHsmdaQueueId	not-accessible	The HSMDA queue ID is used as the secondary index to the table entry.
THS tSapEgressHsmdaQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.6	THsmdaCIRKRate	read-create	The value of tSapEgressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 10.0 Release.
THS tSapEgressHsmdaQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.5	THsmdaPIRKRate	read-create	The value of tSapEgressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
THS tSapEgressHsmdaQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.11	THSMDAQueueBurstLimit	read-create	The value of tSapEgressHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
TAD tSapEgressHsmdaQueueCIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.3	TAdaptationRule	read-create	The value of tSapEgressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. This object is obsoleted in 10.0 Release.
tSapEgressHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.4.1		not-accessible	Information about a particular HSMDA queue for a sap-egress policy. Entries are created by user.
TIM tSapEgressHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.8	TimeStamp	read-only	The value of tSapEgressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapEgressHsmdaQueueTable.
THS tSapEgressHsmdaQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.10	THSMDABurstSizeBytes	read-create	The value of tSapEgressHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue.
TAD tSapEgressHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.4	TAdaptationRule	read-create	The value of tSapEgressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
ROW tSapEgressHsmdaQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.2	RowStatus	read-create	The value of tSapEgressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapEgressHsmdaQueueTable.
TNA tSapEgressHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.7	TNamedItem	read-create	The value of tSapEgressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
tSapEgressHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.4		not-accessible	Information about all sap-egress policies' HSMDA queues.
THS tSapEgressHsmdaQueueWrrWeight	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.9	THsmdaWrrWeight	read-create	The value of tSapEgressHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
TNA tSapEgressHsmdaWrrPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.8	TNamedItemOrEmpty	read-create	The value of tSapEgressHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use.
TSA tSapEgressIndex	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1	TSapEgressPolicyID	not-accessible	the sap-egress policy ID is used as index for the table.
TIM tSapEgressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressTable.
TMA tSapEgressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.7	TMatchCriteria	read-only	The value of tSapEgressMatchCriteria indicates which type of match criteria the policy should use. When tSapEgressMatchCriteria has a value of 'ip', the sap-egress policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. The value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. The value of tSapEgressMatchCriteria is set to 'none' when the last criteria table entry is removed.
tSapEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.4
TLN tSapEgressPolicyName	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.10	TLNamedItemOrEmpty	read-create	The value of tSapEgressPolicyName specifies the name to associate with this policy.
tSapEgressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.4.6.1		not-accessible	Information about a particular sap-egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TFC tSapEgressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.5	TFCNameOrEmpty	read-create	The value of tSapEgressPrecFC, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
NUM tSapEgressPrecHsmdaCntrOverride	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.4	TEgressHsmdaCounterIdOrZero	read-create	The value of tSapEgressPrecHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapEgressPrecValue. A value of zero implies that the default counters should be used.
TIM tSapEgressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.3	TimeStamp	read-only	The value of tSapEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TPR tSapEgressPrecProfile	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.6	TProfileOrNone	read-create	The value of tSapEgressPrecProfile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
ROW tSapEgressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.2	RowStatus	read-create	The value of tSapEgressPrecRowStatus controls the creation/deletion of rows in this table.
tSapEgressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.4.6		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
TPR tSapEgressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.1	TPrecValue	not-accessible	The value of tSapEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tSapEgressPrecTable.
TCI tSapEgressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15	TCIRRate	read-create	The administrative CIR specified by the user.
U32 tSapEgressQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.32	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminCIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
TPI tSapEgressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14	TPIRRate	read-create	The administrative PIR specified by the user.
U32 tSapEgressQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.31	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminPIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
TNA tSapEgressQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.34	TNamedItemOrEmpty	read-create	The value of tSapEgressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TBU tSapEgressQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.29	TBurstLimit	read-create	The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tSapEgressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TAD tSapEgressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TLE tSapEgressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tSapEgressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
tSapEgressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.2.1		not-accessible	Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
INT tSapEgressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8	INTEGER	read-create	tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tSapEgressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TEG tSapEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1	TEgressQueueId	not-accessible	the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.
TIM tSapEgressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18	TimeStamp	read-only	timestamp of last change to this row in tSapEgressQueueTable.
TLE tSapEgressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TBU tSapEgressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapEgressQueueMBSBytes object.
TBU tSapEgressQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.28	TBurstSizeBytes	read-create	The maximum amount of buffer space (in bytes) allowed for the queue.
TCI tSapEgressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TPI tSapEgressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16	TPIRRate	read-only	The administrative PIR specified by the user.
TNA tSapEgressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TAD tSapEgressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TEG tSapEgressQueuePktOffset	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.30	TEgressQPerPacketOffset	read-create	The value of tSapEgressQueuePktOffset specifies the per packet byte offset for this queue.
TNA tSapEgressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25	TNamedItemOrEmpty	read-create	The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
U32 tSapEgressQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24	Unsigned32	read-create	The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
TLE tSapEgressQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22	TLevelOrDefault	read-create	The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tSapEgressQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23	TWeight	read-create	The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tSapEgressQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20	TLevel	read-create	The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tSapEgressQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21	TWeight	read-create	The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TBW tSapEgressQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.33	TBWRateType	read-create	The value of tSapEgressQueueRateType specifies the type of Egress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapEgressQueueAdminCIRPercent and tSapEgressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the egress queue rates are specified in percentage. The objects tSapEgressQueueAdminCIR and tSapEgressQueueAdminPIR will be set to their default values.
ROW tSapEgressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2	RowStatus	read-create	Row Status of the entry.
tSapEgressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.2		not-accessible	information about all sap-egress policies' queues.
TIM tSapEgressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.31	TimeStamp	read-only	tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table.
T/F tSapEgressQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19	TruthValue	read-create	The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.
TWE tSapEgressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
T/F tSapEgressQueueXPWredQ	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.26	TruthValue	read-create	The value of tSapEgressQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
TNA tSapEgressQueueXPWredQSlope	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.27	TNamedItem	read-create	The value of tSapEgressQueueXPWredQSlope specifies the name of the slope-policy to be applied for SAP egress queue. An 'inconsistentValue' error is returned when this object is set to a non-default value when tSapEgressQueueXPWredQ is set to 'false'.
ROW tSapEgressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2	RowStatus	read-create	Row Status of this policy's entry.
TIT tSapEgressScope	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3	TItemScope	read-create	scope of the sap-egress policy.
tSapEgressTable	1.3.6.1.4.1.6527.3.1.2.16.4.1		not-accessible	information about all sap-egress policies.
TIM tSapEgressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.30	TimeStamp	read-only	tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table.
TIM tSapEgrHsmdaQueueTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.68	TimeStamp	read-only	tSapEgrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Egress HSMDA Queue Table.
TFC tSapEgrIPCritActionFC	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.22	TFCNameOrEmpty	read-create	tSapEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP or IPv6 criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions.
NUM tSapEgrIPCritActionHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.6	TEgressHsmdaCounterIdOrZero	read-create	The value of the object tSapEgrIPCritActionHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-egress policy specified by tSapEgressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used.
TPR tSapEgrIPCritActionProfile	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.23	TProfileOrNone	read-create	tSapEgrIPCritActionProfile specifies the profile of the traffic that matches the specific IP or IPv6 criteria. The value none indicates that the profile is derived from ingress classification and profiling functions.
IPt tSapEgrIPCritAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.1	InetAddressType	not-accessible	The value of tSapEgrIPCritAddrType specifies the index address type this entry should match against.
TIT tSapEgrIPCritDescription	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.5	TItemDescription	read-create	The value of tSapEgrIPCritDescription specifies a description of the sap-egress IP or IPv6 criteria entry.
IP tSapEgrIPCritDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.11	InetAddress	read-create	The value of tSapEgrIPCritDestIpAddr specifies the IP or IPv6 address to match with destination-IP of the packet.
IPt tSapEgrIPCritDestIpAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.10	InetAddressType	read-create	The value of tSapEgrIPCritDestIpAddrType specifies the address type of tSapEgrIPCritDestIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
ADR tSapEgrIPCritDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.12	InetAddressPrefixLength	read-create	The value of tSapEgrIPCritDestIpMask specifies the number of bits of the destination IP or IPv6 address to match.
TTC tSapEgrIPCritDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.19	TTcpUdpPortOperator	read-create	The value of tSapEgrIPCritDestPortOperator specifies the manner in which tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue2 are to be used.
TTC tSapEgrIPCritDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.17	TTcpUdpPort	read-create	The value of tSapEgrIPCritDestPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
TTC tSapEgrIPCritDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.18	TTcpUdpPort	read-create	The value of tSapEgrIPCritDestPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
TDS tSapEgrIPCritDSCP	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.20	TDSCPNameOrEmpty	read-create	The value of tSapEgrIPCritDSCP specifies the DSCP value to match in the packet
tSapEgrIPCritEntry	1.3.6.1.4.1.6527.3.1.2.16.4.7.1		not-accessible	Information about a particular egress IP or IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TIT tSapEgrIPCritFragment	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.21	TItemMatch	read-create	The value of tSapEgrIPCritFragment specifies fragmented packet matching. If the value is 'true', only fragmented packets match. If the value is 'false', only non-fragmented packets match. If the value is 'off', all packets match regardless. This field is only relevant for ipv4. An inconsistentValue error is returned when the value of tSapEgrIPCritFragment is not 'off' and the value of tSapEgrIPCritAddrType is not 'ipv4'.
U32 tSapEgrIPCritIndex	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.2	Unsigned32	not-accessible	The value of tSapEgrIPCritIndex specifies the index for a sap-egress IP or IPv6 criteria entry.
TIM tSapEgrIPCritLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.4	TimeStamp	read-only	The value of tSapEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIP tSapEgrIPCritProtocol	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.13	TIpProtocol	read-create	The value of tSapEgrIPCritProtocol specifies the IP protocol or IPv6 next-header to match. The value '-1' is used to disable matching by IP protocol or IPv6 next-header. When this value specifies an IPv6 next-header, since the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
ROW tSapEgrIPCritRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.3	RowStatus	read-create	The value of tSapEgrIPCritRowStatus is used for the creation and deletion of sap-egress IP or IPv6 criteria entries.
IP tSapEgrIPCritSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.8	InetAddress	read-create	The value of tSapEgrIPCritSourceIpAddr specifies the IP or IPv6 address to match with source-IP of the packet.
IPt tSapEgrIPCritSourceIpAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.7	InetAddressType	read-create	The value of tSapEgrIPCritSourceIpAddrType specifies the address type of tSapEgrIPCritSourceIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
ADR tSapEgrIPCritSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.9	InetAddressPrefixLength	read-create	The value of tSapEgrIPCritSourceIpMask specifies the number of bits of the source IP or IPv6 address to match.
TTC tSapEgrIPCritSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.16	TTcpUdpPortOperator	read-create	The value of tSapEgrIPCritSourcePortOperator specifies the manner in which tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 are to be used.
TTC tSapEgrIPCritSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.14	TTcpUdpPort	read-create	The value of tSapEgrIPCritSourcePortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
TTC tSapEgrIPCritSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.15	TTcpUdpPort	read-create	The value of tSapEgrIPCritSourcePortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
tSapEgrIPCritTable	1.3.6.1.4.1.6527.3.1.2.16.4.7		not-accessible	This table maintains the entries for matching criteria for IP packets on egress. In release 10.0 and higher, this table can also contain IPv6 criteria.
THP tSapEgrPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.11	THPolCIRRate	read-create	tSapEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
U32 tSapEgrPolicerAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.18	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
THP tSapEgrPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.10	THPolPIRRate	read-create	tSapEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
U32 tSapEgrPolicerAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
TNA tSapEgrPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.24	TNamedItemOrEmpty	read-create	The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TPL tSapEgrPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.15	TPlcrBurstSizeBytes	read-create	The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
TAD tSapEgrPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TIT tSapEgrPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.4	TItemDescription	read-create	tSapEgrPolicerDescr specifies the description of the policer.
tSapEgrPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.4.8.1		not-accessible	tSapEgrPolicerEntry defines an entry in the tSapEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapEgrPolicerRowStatus.
TBU tSapEgrPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.14	TBurstPercentOrDefault	read-create	The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
TEG tSapEgrPolicerId	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.1	TEgrPolicerId	not-accessible	tSapEgrPolicerId defines the SAP Egress Policer identifier. It identifies an sap-egress policer in the managed system.
TIM tSapEgrPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.3	TimeStamp	read-only	tSapEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TLE tSapEgrPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.8	TLevel	read-create	tSapEgrPolicerLevel specifies the level of priority while feeding the parent.
TPL tSapEgrPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.13	TPlcrBurstSizeBytes	read-create	The tSapEgrPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
TNA tSapEgrPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.7	TNamedItemOrEmpty	read-create	tSapEgrPolicerParent specifies the scheduler to which this queue would be feeding.
TAD tSapEgrPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPE tSapEgrPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.16	TPerPacketOffset	read-create	tSapEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
T/F tSapEgrPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.25	TruthValue	read-create	The value of tSapEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tSapEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
TPO tSapEgrPolicerRateType	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.19	TPolicerRateType	read-create	The value of tSapEgrPolicerRateType specifies the type of egress policer rate. When the value of the object is set to 'kbps', the egresss policer rates are specified in kbps. The objects tSapEgrPolicerAdminPIRPercent and tSapEgrPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the egress policer rates are specified in percentage. The objects tSapEgrPolicerAdminPIR and tSapEgrPolicerAdminCIR will be set to their default values.
ROW tSapEgrPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.2	RowStatus	read-create	tSapEgrPolicerRowStatus allows entries to be created and deleted in the tSapEgrPolicerTable.
TMN tSapEgrPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.23	TmnxSlopeMap	read-create	The value of tSapEgrPolicerSlopeMap specifies the slope map to be used with this policer.
U32 tSapEgrPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.21	Unsigned32	read-create	The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSapEgrPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.22	Unsigned32	read-create	The value of tSapEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapEgrPolicerSlopeStartDepth up to the tSapEgrPolicerSlopeMaxProb at the tSapEgrPolicerSlopeMaxDepth.
U32 tSapEgrPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.20	Unsigned32	read-create	The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
TMN tSapEgrPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.12	TmnxEgrPolicerStatMode	read-create	tSapEgrPolicerStatMode specifies the mode of statistics collected by this policer.
tSapEgrPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.4.8		not-accessible	tSapEgrPolicerTable defines SAP Egress Policer Table for providing, via SNMP, the capability of defining the policers. tSapEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapEgressFCTable.
TIM tSapEgrPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.86	TimeStamp	read-only	tSapEgrPolicerTableLastChanged indicates the timestamp of last change to the tSapEgrPolicerTable.
TPO tSapEgrPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.9	TPolicerWeight	read-create	tSapEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
tSapEgrPolicyNameEntry	1.3.6.1.4.1.6527.3.1.2.16.4.9.1		not-accessible	Basic information about a specific SAP egress policy name.
TSA tSapEgrPolicyNameId	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.1	TSapEgressPolicyID	read-only	The value of the object tSapEgrPolicyNameId specifies the policy name associated with this SAP egress policy.
TIM tSapEgrPolicyNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.3	TimeStamp	read-only	The value of tSapEgrPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tSapEgrPolicyNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.2	RowStatus	read-only	This value of the object tSapEgrPolicyNameRowStatus specifies the status of this row.
tSapEgrPolicyNameTable	1.3.6.1.4.1.6527.3.1.2.16.4.9		not-accessible	A table that contains SAP egress policy name information. Entries are created automatically by the system when tSapEgressPolicyName object is set for the SAP egress policy.
TIM tSapEgrPolicyNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.96	TimeStamp	read-only	The value of tSapEgrPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapEgrPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
THP tSapIngPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11	THPolCIRRate	read-create	tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user.
U32 tSapIngPolicerAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
THP tSapIngPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10	THPolPIRRate	read-create	tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user.
U32 tSapIngPolicerAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
TNA tSapIngPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24	TNamedItemOrEmpty	read-create	The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TPL tSapIngPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15	TPlcrBurstSizeBytes	read-create	The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
TAD tSapIngPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TIT tSapIngPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4	TItemDescription	read-create	tSapIngPolicerDescr specifies the description of the policer.
tSapIngPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.3.12.1		not-accessible	tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapIngPolicerRowStatus.
TBU tSapIngPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14	TBurstPercentOrDefault	read-create	The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
TIN tSapIngPolicerId	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1	TIngPolicerId	not-accessible	tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.
TIM tSapIngPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3	TimeStamp	read-only	tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TLE tSapIngPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8	TLevel	read-create	tSapIngPolicerLevel specifies the level of priority while feeding the parent.
TPL tSapIngPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13	TPlcrBurstSizeBytes	read-create	The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
TNA tSapIngPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7	TNamedItemOrEmpty	read-create	tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.
TAD tSapIngPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPE tSapIngPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16	TPerPacketOffset	read-create	tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
T/F tSapIngPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25	TruthValue	read-create	The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
TPO tSapIngPolicerRateType	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19	TPolicerRateType	read-create	The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerAdminPIRPercent and tSapIngPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the ingress policer rates are specified in percentage. The objects tSapIngPolicerAdminPIR and tSapIngPolicerAdminCIR will be set to their default values.
ROW tSapIngPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2	RowStatus	read-create	tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.
TMN tSapIngPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23	TmnxSlopeMap	read-create	The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer.
U32 tSapIngPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21	Unsigned32	read-create	The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSapIngPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22	Unsigned32	read-create	The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth up to the tSapIngPolicerSlopeMaxProb at the tSapIngPolicerSlopeMaxDepth.
U32 tSapIngPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20	Unsigned32	read-create	The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
TMN tSapIngPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12	TmnxIngPolicerStatMode	read-create	tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.
tSapIngPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.3.12		not-accessible	tSapIngPolicerTable defines SAP Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tSapIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
TIM tSapIngPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.85	TimeStamp	read-only	tSapIngPolicerTableLastChanged indicates the timestamp of last change to the tSapIngPolicerTable.
TPO tSapIngPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9	TPolicerWeight	read-create	tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
tSapIngPolicyNameEntry	1.3.6.1.4.1.6527.3.1.2.16.3.13.1		not-accessible	Basic information about a specific SAP ingress policy name.
TSA tSapIngPolicyNameId	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.1	TSapIngressPolicyID	read-only	The value of the object tSapIngPolicyNameId specifies the policy name associated with this SAP ingress policy.
TIM tSapIngPolicyNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.3	TimeStamp	read-only	The value of tSapIngPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tSapIngPolicyNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.2	RowStatus	read-only	This value of the object tSapIngPolicyNameRowStatus specifies the status of this row.
tSapIngPolicyNameTable	1.3.6.1.4.1.6527.3.1.2.16.3.13		not-accessible	A table that contains SAP ingress policy name information. Entries are created automatically by the system when tSapIngressPolicyName object is set for the SAP ingress policy.
TIM tSapIngPolicyNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.95	TimeStamp	read-only	The value of tSapIngPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapIngPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TNA tSapIngressDefaultFC	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5	TNamedItem	read-create	tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.
TPR tSapIngressDefaultFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6	TPriority	read-create	the priority to assign to traffic ingressing as the default action queue.
NUM tSapIngressDefFCHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.10	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDefFCHsmdaCntrOvr specifies the counter to use for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TIT tSapIngressDescription	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4	TItemDescription	read-create	user-provided description of the policy.
tSapIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.3.4.1		not-accessible	Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TNA tSapIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3	TNamedItemOrEmpty	read-create	tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
NUM tSapIngressDot1pHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TIM tSapIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDot1pTable.
TPR tSapIngressDot1pPriority	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4	TPriorityOrDefault	read-create	priority to use for packets that match the dot1p value tSapIngressDot1pValue.
ROW tSapIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2	RowStatus	read-create	Row Status for this sap-ingress policy's dot1p entry.
tSapIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.3.4		not-accessible	a list of all dot1p entries for all sap-ingress policies.
TIM tSapIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.23	TimeStamp	read-only	tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table.
DOT tSapIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1	Dot1PPriority	not-accessible	dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
TDS tSapIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1	TDSCPName	not-accessible
tSapIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.3.3.1		not-accessible	Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).
TNA tSapIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3	TNamedItemOrEmpty	read-create	tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.
NUM tSapIngressDSCPHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TIM tSapIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDSCPTable.
TPR tSapIngressDSCPPriority	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4	TPriorityOrDefault	read-create
ROW tSapIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2	RowStatus	read-create	This object allows creation/deletion of rows in this table.
tSapIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.3.3		not-accessible	a list of all DSCP entries for all sap-ingress policies.
TIM tSapIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.22	TimeStamp	read-only	tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table.
tSapIngressEntry	1.3.6.1.4.1.6527.3.1.2.16.3.1.1		not-accessible	Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
T/F tSapIngressFCBCastPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.29	TruthValue	read-create	The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCBCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
TIN tSapIngressFCBCastPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.25	TIngPolicerIdOrNone	read-create	tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class.
TIN tSapIngressFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5	TIngressQueueId	read-create	The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpBCast implies that the default queues should be used.
T/F tSapIngressFCDE1OutOfProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18	TruthValue	read-create	The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.
tSapIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.3.7.1		not-accessible	Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TIN tSapIngressFCHsmdaBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.17	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressFCHsmdaMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.16	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressFCHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.15	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TNA tSapIngressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9	TNamedItemOrEmpty	read-create	tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.
TPR tSapIngressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10	TPrecValueOrNone	read-create	tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.
TRE tSapIngressFCInProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8	TRemarkType	read-create	tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TIM tSapIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7	TimeStamp	read-only	tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.
T/F tSapIngressFCMCastPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.28	TruthValue	read-create	The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific multicast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCMCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
TIN tSapIngressFCMCastPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.24	TIngPolicerIdOrNone	read-create	tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class.
TIN tSapIngressFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4	TIngressQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpMCast implies that the default queues should be used.
TNA tSapIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1	TNamedItem	not-accessible	tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.
TNA tSapIngressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12	TNamedItemOrEmpty	read-create	tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.
TPR tSapIngressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13	TPrecValueOrNone	read-create	tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.
TRE tSapIngressFCOutProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11	TRemarkType	read-create	tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
T/F tSapIngressFCPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.27	TruthValue	read-create	The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies the FC to use the specific policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
TIN tSapIngressFCPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.23	TIngPolicerIdOrNone	read-create	tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class.
TPR tSapIngressFCProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14	TProfileOrNone	read-create	tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.
TNA tSapIngressFCQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.19	TNamedItemOrEmpty	read-create	tSapIngressFCQGrp specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpBCast	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.21	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCBCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpMCast	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.20	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCMCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpUnknown	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.22	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCUnknownQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TIN tSapIngressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3	TIngressQueueId	read-create	The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used.
ROW tSapIngressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2	RowStatus	read-create	Row Status for this queue.
tSapIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.3.7		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
TIM tSapIngressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.26	TimeStamp	read-only	tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table.
T/F tSapIngressFCUnknownPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.30	TruthValue	read-create	The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCUnknownPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
TIN tSapIngressFCUnknownPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.26	TIngPolicerIdOrNone	read-create	tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class.
TIN tSapIngressFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6	TIngressQueueId	read-create	The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpUnknown implies that the default queues should be used.
TIN tSapIngressHsmdaPacketOffset	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.9	TIngressHsmdaPerPacketOffset	read-create	The value of tSapIngressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting. This object is obsoleted in 10.0 Release.
TIN tSapIngressHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.1	TIngressHsmdaQueueId	not-accessible	The HSMDA queue ID is used as the secondary index to the table entry.
THS tSapIngressHsmdaQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.7	THsmdaCIRKRate	read-create	The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user.
THS tSapIngressHsmdaQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.6	THsmdaPIRKRate	read-create	The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
TAD tSapIngressHsmdaQueueCIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.4	TAdaptationRule	read-create	The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
tSapIngressHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.10.1		not-accessible	Information about a particular HSMDA queue for a sap-ingress policy. Entries are created by user.
TIM tSapIngressHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.3	TimeStamp	read-only	The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable.
TAD tSapIngressHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.5	TAdaptationRule	read-create	The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
T/F tSapIngressHsmdaQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.9	TruthValue	read-create	The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. This policing function is different than the shaping function normally performed by the queues defined rate in that scheduling is not stopped for the queue when the rate is exceeded. Accordingly, tSapIngressHsmdaQueuePoliced overrides the bandwidth specified by the object tSapIngressHsmdaQueueAdminCIR.
ROW tSapIngressHsmdaQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.2	RowStatus	read-create	The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable.
TNA tSapIngressHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.8	TNamedItem	read-create	The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
tSapIngressHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.10		not-accessible	Information about all sap-ingress policies' HSMDA queues. This table is obsoleted in 10.0 release.
TSA tSapIngressIndex	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1	TSapIngressPolicyID	not-accessible	the policy ID is the index to this table.
TNA tSapIngressIPCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4	TNamedItemOrEmpty	read-create	tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressIPCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5	TPriorityOrDefault	read-create	priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
TIT tSapIngressIPCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3	TItemDescription	read-create	description of this IP criteria entry.
IP tSapIngressIPCriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8	IpAddress	read-create	IP address to match with destination-IP of the packet.
ADR tSapIngressIPCriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9	IpAddressPrefixLength	read-create	the prefix is the number of bits of the destination IP address to match.
TTC tSapIngressIPCriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPCriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TTC tSapIngressIPCriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TDS tSapIngressIPCriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17	TDSCPNameOrEmpty	read-create	DSCP value to match in the packet
tSapIngressIPCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.5.1		not-accessible	Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TIT tSapIngressIPCriteriaFragment	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19	TItemMatch	read-create	matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).
TEN tSapIngressIPCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1	TEntryId	not-accessible	unique identifier separates this entry from others in this policy.
DOT tSapIngressIPCriteriaIpPrecMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.32	Dot1PPriority	read-create
DOT tSapIngressIPCriteriaIpPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.31	Dot1PPriority	read-create
TIM tSapIngressIPCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20	TimeStamp	read-only	timestamp of last change to this row in tSapIngressIPCriteriaTable.
TIP tSapIngressIPCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10	TIpProtocol	read-create	IP protocol to match. use -1 to disable matching by IP protocol.
ROW tSapIngressIPCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2	RowStatus	read-create	Row Status for the IP Criteria entry.
IP tSapIngressIPCriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6	IpAddress	read-create	IP address to match with source-IP of the packet.
ADR tSapIngressIPCriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7	IpAddressPrefixLength	read-create	the prefix is the number of bits of the source IP address to match.
TTC tSapIngressIPCriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPCriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
TTC tSapIngressIPCriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
tSapIngressIPCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.5		not-accessible	information about all sap-ingress policies' ip-criteria entries.
TIM tSapIngressIPCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.24	TimeStamp	read-only	tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table.
NUM tSapIngressIPCritHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.21	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TNA tSapIngressIPv6CriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressIPv6CriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
TIT tSapIngressIPv6CriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3	TItemDescription	read-create	The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.
ADR tSapIngressIPv6CriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match.
TTC tSapIngressIPv6CriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used.
TTC tSapIngressIPv6CriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TTC tSapIngressIPv6CriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TDS tSapIngressIPv6CriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17	TDSCPNameOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet
tSapIngressIPv6CriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.9.1		not-accessible	Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tSapIngressIPv6CriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1	TEntryId	not-accessible	The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.
DOT tSapIngressIPv6CriteriaIpPrecMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.32	Dot1PPriority	read-create
DOT tSapIngressIPv6CriteriaIpPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.31	Dot1PPriority	read-create
TIM tSapIngressIPv6CriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20	TimeStamp	read-only	The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.
TIP tSapIngressIPv6CriteriaNextHeader	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10	TIpProtocol	read-create	The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
ROW tSapIngressIPv6CriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2	RowStatus	read-create	The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.
ADR tSapIngressIPv6CriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match.
TTC tSapIngressIPv6CriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used.
TTC tSapIngressIPv6CriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
TTC tSapIngressIPv6CriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
tSapIngressIPv6CriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.9		not-accessible	Information about all sap-ingress policies' ipv6-criteria entries.
TIM tSapIngressIPv6CriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.66	TimeStamp	read-only	The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table.
TIM tSapIngressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8	TimeStamp	read-only	timestamp of last change to this row in tSapIngressTable.
tSapIngressLspExpEntry	1.3.6.1.4.1.6527.3.1.2.16.3.11.1		not-accessible	Information about a particular sap-ingress policy's Lsp Exp Bit values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TNA tSapIngressLspExpFC	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressLspExpFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressLspExpFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic.
NUM tSapIngressLspExpHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TIM tSapIngressLspExpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.3	TimeStamp	read-only	The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable.
ROW tSapIngressLspExpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.2	RowStatus	read-create	The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping.
tSapIngressLspExpTable	1.3.6.1.4.1.6527.3.1.2.16.3.11		not-accessible	This table maintains the mappings of an Lsp Exp Bit value into a forwarding class
TIM tSapIngressLspExpTableLastChange	1.3.6.1.4.1.6527.3.1.2.16.20.84	TimeStamp	read-only	The value of tSapIngressLspExpTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tSapIngressLspExpTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TLS tSapIngressLspExpValue	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.1	TLspExpValue	not-accessible	The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done.
TNA tSapIngressMacCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4	TNamedItemOrEmpty	read-create	tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressMacCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5	TPriorityOrDefault	read-create
OID tSapIngressMacCriteriaAtmVci	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.22	AtmVcIdentifier	read-create	The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tSapIngressMacCriteriaFrameType is not set to 'atm'.
TIT tSapIngressMacCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3	TItemDescription	read-create
DOT tSapIngressMacCriteriaDot1PMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13	Dot1PPriority	read-create
DOT tSapIngressMacCriteriaDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12	Dot1PPriority	read-create
NUM tSapIngressMacCriteriaDSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaDSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
MAC tSapIngressMacCriteriaDstMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10	MacAddress	read-create
MAC tSapIngressMacCriteriaDstMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11	MacAddress	read-create
tSapIngressMacCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.6.1		not-accessible	Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
I32 tSapIngressMacCriteriaEthernetType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
TFR tSapIngressMacCriteriaFrameType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria.
TEN tSapIngressMacCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1	TEntryId	not-accessible
TIM tSapIngressMacCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21	TimeStamp	read-only	timestamp of last change to this row in tSapIngressMacCriteriaTable.
ROW tSapIngressMacCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2	RowStatus	read-create
INT tSapIngressMacCriteriaSnapOui	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20	INTEGER	read-create	whether to match snap-oui, and what to match.
I32 tSapIngressMacCriteriaSnapPid	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
MAC tSapIngressMacCriteriaSrcMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8	MacAddress	read-create
MAC tSapIngressMacCriteriaSrcMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9	MacAddress	read-create
NUM tSapIngressMacCriteriaSSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaSSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
tSapIngressMacCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.6		not-accessible	information about all sap-ingress policies' mac-criteria entries.
TIM tSapIngressMacCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.25	TimeStamp	read-only	tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table.
QTA tSapIngressMacCritInnerTagMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.24	QTagFullRange	read-create	The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
QTA tSapIngressMacCritInnerTagValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.23	QTagFullRangeOrNone	read-create	The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no VLAN tag matching will be performed.
QTA tSapIngressMacCritOuterTagMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.26	QTagFullRange	read-create	The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
QTA tSapIngressMacCritOuterTagValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.25	QTagFullRangeOrNone	read-create	The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
TMA tSapIngressMacCritType	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.11	TMacFilterType	read-create	tSapIngressMacCritType specifies which type of entries this mac filter can contain. If tSapIngressMacCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type vid(3) or isid(2). tSapIngressMacCritType 'isid(2)' is not supported here. If tSapIngressMacCritType is set to vid(3) the only accepted match criteria for the filter entries are: - tSapIngressMacCritInnerTagValue - tSapIngressMacCritInnerTagMask - tSapIngressMacCritOuterTagValue - tSapIngressMacCritOuterTagMask tSapIngressMacCritType can only be changed if the filter has no entries. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.
TMA tSapIngressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7	TMatchCriteria	read-only	indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.
tSapIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.3
TLN tSapIngressPolicyName	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.12	TLNamedItemOrEmpty	read-create	The value of tSapIngressPolicyName specifies the name to associate with this policy.
tSapIngressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.3.8.1		not-accessible	Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TNA tSapIngressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3	TNamedItemOrEmpty	read-create	tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressPrecFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4	TPriorityOrDefault	read-create	The priority to be assigned to the matching traffic.
NUM tSapIngressPrecHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TIM tSapIngressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressPrecTable.
ROW tSapIngressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2	RowStatus	read-create	Row Status for this mapping.
tSapIngressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.3.8		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
TIM tSapIngressPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.27	TimeStamp	read-only	tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table.
TPR tSapIngressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1	TPrecValue	not-accessible	Precedence value for which the mapping is done.
TIN tSapIngressQueue	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1	TIngressQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
TCI tSapIngressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16	TCIRRate	read-create	The administrative CIR specified by the user.
U32 tSapIngressQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.26	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
TPI tSapIngressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15	TPIRRate	read-create	The administrative PIR specified by the user.
U32 tSapIngressQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.25	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
TNA tSapIngressQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.28	TNamedItemOrEmpty	read-create	The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TBU tSapIngressQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.24	TBurstLimit	read-create	The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tSapIngressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TAD tSapIngressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TLE tSapIngressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tSapIngressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
tSapIngressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.2.1		not-accessible	Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.
INT tSapIngressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9	INTEGER	read-create	tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tSapIngressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tSapIngressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19	TimeStamp	read-only	timestamp of last change to this row in tSapIngressQueueTable.
TLE tSapIngressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TBU tSapIngressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object.
TBU tSapIngressQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.23	TBurstSizeBytes	read-create	The maximum amount of buffer space (in bytes) allowed for the queue.
T/F tSapIngressQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8	TruthValue	read-create	This object specifies if this is a multicast queue or not.
TQU tSapIngressQueueMode	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21	TQueueMode	read-create	tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TCI tSapIngressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TPI tSapIngressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17	TPIRRate	read-only	The operating PIR.
TNA tSapIngressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TAD tSapIngressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
T/F tSapIngressQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20	TruthValue	read-create	tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.
TNA tSapIngressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22	TNamedItemOrEmpty	read-create	The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.
TBW tSapIngressQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.27	TBWRateType	read-create	The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueueAdminCIRPercent and tSapIngressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the ingress queue rates are specified in percentage. The objects tSapIngressQueueAdminCIR and tSapIngressQueueAdminPIR will be set to their default values.
ROW tSapIngressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
tSapIngressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.2		not-accessible	information about all sap-ingress policies' queues.
TIM tSapIngressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.21	TimeStamp	read-only	tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table.
TWE tSapIngressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
ROW tSapIngressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2	RowStatus	read-create	Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable
TIT tSapIngressScope	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3	TItemScope	read-create	Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.
tSapIngressTable	1.3.6.1.4.1.6527.3.1.2.16.3.1		not-accessible
TIM tSapIngressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.20	TimeStamp	read-only	The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table.
TIM tSapIngrHsmdaQueueTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.67	TimeStamp	read-only	tSapIngrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Ingress HSMDA Queue Table. This object is obsoleted in 10.0 Release.
tSchedulerObjects	1.3.6.1.4.1.6527.3.1.2.16.12
TIT tSchedulerPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3	TItemDescription	read-create	Description for the scheduler policy
tSchedulerPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.1.1		not-accessible	Information about a particular Scheduler Policy.
T/F tSchedulerPolicyFrameBasedAccnt	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5	TruthValue	read-create	The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.
TIM tSchedulerPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4	TimeStamp	read-only	timestamp of last change to this row in tSchedulerPolicyTable.
TNA tSchedulerPolicyName	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1	TNamedItem	not-accessible	Name of the scheduler policy.
ROW tSchedulerPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2	RowStatus	read-create	Row Status of the entry.
tSchedulerPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.12.1		not-accessible
TIM tSchedulerPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.60	TimeStamp	read-only	tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table.
TBU tSharedQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.13	TBurstPercent	read-create	tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.
TRA tSharedQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.11	TRatePercent	read-create	tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.
TLE tSharedQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.8	TLevelOrDefault	read-create	tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate.
TWE tSharedQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.9	TWeight	read-create	tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate.
tSharedQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.2.1		not-accessible	Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.
INT tSharedQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.10	INTEGER	read-create	tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.
TQU tSharedQueueFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.6	TQueueId	read-create	The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use.
tSharedQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.3.1		not-accessible	Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.
TIM tSharedQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.3	TimeStamp	read-only	tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.
TQU tSharedQueueFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.5	TQueueId	read-create	The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.
TFC tSharedQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.1	TFCName	not-accessible	tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.
TQU tSharedQueueFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.4	TQueueId	read-create	tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.
ROW tSharedQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.2	RowStatus	read-create	tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.
tSharedQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.3		not-accessible	Defines the Alcatel-Lucent SROS series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.
TIM tSharedQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.65	TimeStamp	read-only	tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table.
TQU tSharedQueueFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.7	TQueueId	read-create	The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.
TBU tSharedQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.15	TBurstPercentOrDefault	read-create	tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue.
TQU tSharedQueueId	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.1	TQueueId	not-accessible	tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.
T/F tSharedQueueIsMultipoint	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.16	TruthValue	read-create	The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be modified at row creation time; any attempt to set it after creation is silently ignored.
TIM tSharedQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.3	TimeStamp	read-only	tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TLE tSharedQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.6	TLevel	read-create	tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate.
TBU tSharedQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.14	TBurstPercent	read-create	tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.
tSharedQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.7
TNA tSharedQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.5	TNamedItemOrEmpty	read-create	tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated.
TPI tSharedQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.12	TPIRRatePercent	read-create	tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.
TNA tSharedQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.1	TNamedItem	not-accessible	tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.
TIT tSharedQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.4	TItemDescription	read-create	tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.
tSharedQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.7.1.1		not-accessible	Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.
TIM tSharedQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.3	TimeStamp	read-only	tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.
ROW tSharedQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.2	RowStatus	read-create	tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.
tSharedQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.7.1		not-accessible	Defines the Alcatel-Lucent SROS series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.
TIM tSharedQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.63	TimeStamp	read-only	tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table.
TNA tSharedQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.4	TNamedItemOrEmpty	read-create	tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.
ROW tSharedQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.2	RowStatus	read-create	tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.
tSharedQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.2		not-accessible	Defines the Alcatel-Lucent SROS series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.
TIM tSharedQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.64	TimeStamp	read-only	tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table.
TWE tSharedQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.7	TWeight	read-create	tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate.
TIT tSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3	TItemDescription	read-create	User-provided description of the policy.
INT tSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4	INTEGER	read-create	tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.
U32 tSlopeHiMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.
U32 tSlopeHiStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
TIM tSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13	TimeStamp	read-only	Timestamp of when this entry was last changed.
INT tSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8	INTEGER	read-create	tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.
U32 tSlopeLoMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.
U32 tSlopeLoStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
tSlopeObjects	1.3.6.1.4.1.6527.3.1.2.16.10
TNA tSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1	TNamedItem	not-accessible	tSlopePolicy maintains the name of the slope policy identifying the policy.
tSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.1.1		not-accessible	Slope Policy Entry.
tSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.1		not-accessible	Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
TIM tSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.55	TimeStamp	read-only	tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table.
ROW tSlopeRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
U32 tSlopeTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12	Unsigned32	read-create	The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.
THP tVirtualSchedulerCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11	THPolVirtualScheCIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
TLE tVirtualSchedulerCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8	TLevelOrDefault	read-create	This specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tVirtualSchedulerCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
TIT tVirtualSchedulerDescription	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4	TItemDescription	read-create	Description for the scheduler policy
tVirtualSchedulerEntry	1.3.6.1.4.1.6527.3.1.2.16.12.2.1		not-accessible	Information about a particular Scheduler belonging to a Scheduler Policy.
TIM tVirtualSchedulerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13	TimeStamp	read-only	The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable.
TLE tVirtualSchedulerLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6	TLevel	read-create	This specifies the level of priority while feeding the parent.
TNA tVirtualSchedulerName	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2	TNamedItem	not-accessible	Name of the scheduler policy.
TNA tVirtualSchedulerParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5	TNamedItemOrEmpty	read-create	The scheduler to which this scheduler would be feeding.
THP tVirtualSchedulerPIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10	THPolVirtualSchePIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
TLE tVirtualSchedulerPortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17	TLevelOrDefault	read-create	The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tVirtualSchedulerPortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18	TWeight	read-create	The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tVirtualSchedulerPortLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15	TLevel	read-create	The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tVirtualSchedulerPortWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16	TWeight	read-create	The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
ROW tVirtualSchedulerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3	RowStatus	read-create	Row Status of the entry.
T/F tVirtualSchedulerSummedCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12	TruthValue	read-create	tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning.
tVirtualSchedulerTable	1.3.6.1.4.1.6527.3.1.2.16.12.2		not-accessible
TIM tVirtualSchedulerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.61	TimeStamp	read-only	tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table.
INT tVirtualSchedulerTier	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1	INTEGER	not-accessible	Tier to which this scheduler belongs to.
T/F tVirtualSchedulerUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14	TruthValue	read-create	The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed.
TWE tVirtualSchedulerWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding.
tWrrObjects	1.3.6.1.4.1.6527.3.1.2.16.28

OID symbolic	OID numeric	Type	Access	Description
timetraQosMIBModule	1.3.6.1.4.1.6527.1.1.3.16			This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel-Lucent SROS systems. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tmnxQosConformance	1.3.6.1.4.1.6527.3.1.1.16
tmnxQosCompliances	1.3.6.1.4.1.6527.3.1.1.16.1
tmnxQos7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.4			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R4.0.
tmnxQos7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.5			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R4.0.
tmnxQos7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.6			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R5.0.
tmnxQos7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.7			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R5.0.
tmnxQos7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.8			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.0.
tmnxQos7750V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.9			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.0.
tmnxQos7450V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.10			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
tmnxQos77x0V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.11			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.1.
tmnxQos7450V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.12			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
tmnxQos77x0V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.13			The compliance statement for management of QOS features on Alcatel-Lucent 7750 SROS series systems release R6.1.
tmnxQos7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.14			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R8.0.
tmnxQos77x0V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.15			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R8.0.
tmnxQos77x0V9v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.16			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R9.0.
tmnxQos7450V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.17			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R10.0.
tmnxQos77x0V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.18			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R10.0.
tmnxQosGroups	1.3.6.1.4.1.6527.3.1.1.16.2
tmnxQosGlobalGroup	1.3.6.1.4.1.6527.3.1.1.16.2.1			The group of objects supporting general management of QOS features on Alcatel-Lucent SROS series systems.
tmnxQosDSCPGroup	1.3.6.1.4.1.6527.3.1.1.16.2.2			The group of objects supporting management of Differential Services Code Points on Alcatel-Lucent SROS series systems.
tmnxQosFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.3			The group of objects supporting management of Forwarding Classes on Alcatel-Lucent SROS series systems.
tmnxQosSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.7			The group of objects supporting management of Slope policies on Alcatel-Lucent SROS series systems.
tmnxQosSchedulerGroup	1.3.6.1.4.1.6527.3.1.1.16.2.8			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tQosObsoleteObjectsGroup	1.3.6.1.4.1.6527.3.1.1.16.2.10			The group of obsolete objects in the TIMETRA-QOS-MIB.
tmnxQosSapEgressR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.12			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.13			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosAtmTdpV3v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.15			The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 3.0.
tmnxQosSapIpv6FilterR4r0Group	1.3.6.1.4.1.6527.3.1.1.16.2.16			The group of objects for Qos Policies related to IPv6 on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosQueueV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.18			The group of objects supporting management of QoS queue policies on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSapIngressV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.19			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSchedulerV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.20			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.21			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.22			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosHsmdaV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.23			The group of objects supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosAtmTdpV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.24			The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 5.0.
tmnxQosSapIngressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.25			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosSapEgressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.26			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.27			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosFrameBasedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.28			The group of objects supporting management of frame-based queue accounting on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosObsoletedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.29			The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosNamedPoolPolicyV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.30			The group of objects for the named pool policy on Alcatel-Lucent SROS series systems.
tmnxQosMcMlpppIngrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.31			The group of objects for the multi-class mlppp ingress information on Alcatel-Lucent SROS series systems.
tmnxQosMcMlpppEgrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.32			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosQueueObjGroup	1.3.6.1.4.1.6527.3.1.1.16.2.33			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tQosQGrpFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.34			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.35			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosHsmdaV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.36			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 7.0.
tmnxQosSapAtmV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.37			The group of objects supporting management of SAP ATM related QoS policies for Alcatel-Lucent SROS series systems release 7.0.
tmnxQosMcFrIngrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.38			The group of objects for the multi-class Fr ingress information on Alcatel-Lucent SROS series systems.
tmnxQosMcFrEgrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.39			The group of objects for the multi-class Fr egress information on Alcatel-Lucent SROS series systems.
tmnxQosSapEgrQWredGroup	1.3.6.1.4.1.6527.3.1.1.16.2.40			The group of objects for the WRED specific SAP egress queue information on Alcatel-Lucent SROS series systems.
tmnxQosSapIngressV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.41			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 8.0.
tmnxQosPolicerV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.42			The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 8.0.
tQosQGrpV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.43			The group of objects supporting the management of QOS Queue Groups on Alcatel-Lucent SROS series systems release 8.0.
tQosFCQGrpFC8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.44			The group of objects for the SAP egress information on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.45			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosQueueObjV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.46			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosObsoletedV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.47			The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosPortSchPlcyGrpGroup	1.3.6.1.4.1.6527.3.1.1.16.2.48			The group of objects supporting Port Scheduler Policy Group objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosSchedulerV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.49			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosBurstLimitGroup	1.3.6.1.4.1.6527.3.1.1.16.2.50			The group of objects supporting Burst-size management objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosMacCritVidFltrV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.51			The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosSapEgressV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.52			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosSapIngressV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.53			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosPolicerV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.54			The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosAtmTdpV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.55			The group of objects for ATM Traffic Descriptor Profiles added in release 9.0 of SROS.
tmnxQosHsmdaV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.56			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosNetworkV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.57			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosNamedPoolV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.58			The group of objects supporting management of Network Named Pool policies on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosHsmdaObsoletedV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.59			The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosPolicyV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.60			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosQueueGrpPolcrV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.61			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosEgrReClassifyV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.62			The group of objects supporting management of QoS Egress policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosPolicerSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.63			The group of objects supporting management of QoS policer slope on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosAdvConfigV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.64			The group of objects supporting management of QoS policer and queue advanced configuration parameters on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosHsmdaV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.65			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosNetworkV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.66			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosSapIngressV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.68			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosHsmdaObsoletedV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.69			The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
tQosObjects	1.3.6.1.4.1.6527.3.1.2.16
tDSCPObjects	1.3.6.1.4.1.6527.3.1.2.16.1
tDSCPNameTable	1.3.6.1.4.1.6527.3.1.2.16.1.1		not-accessible	A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
tDSCPNameEntry	1.3.6.1.4.1.6527.3.1.2.16.1.1.1		not-accessible	Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.
TDS tDSCPName	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1	TDSCPName	not-accessible	The name assigned to the DSCP Value.
ROW tDSCPNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2	RowStatus	read-create	Row Status of the entry.
STO tDSCPNameStorageType	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3	StorageType	read-create	The storage type of this row in the table.
TDS tDSCPNameDscpValue	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4	TDSCPValue	read-create	The DSCP Value.
TIM tDSCPNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tDSCPNameTable.
tFCObjects	1.3.6.1.4.1.6527.3.1.2.16.2
tFCNameTable	1.3.6.1.4.1.6527.3.1.2.16.2.1		not-accessible	A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
tFCNameEntry	1.3.6.1.4.1.6527.3.1.2.16.2.1.1		not-accessible	Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.
TFC tFCName	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1	TFCName	not-accessible	Forwarding class name.
ROW tFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2	RowStatus	read-create	Row Status of the entry.
STO tFCStorageType	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3	StorageType	read-create	The storage type of this row in the table.
I32 tFCValue	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4	Integer32	read-create	FC Value.
TIM tFCNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tFCNameTable.
tSapIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.3
tSapIngressTable	1.3.6.1.4.1.6527.3.1.2.16.3.1		not-accessible
tSapIngressEntry	1.3.6.1.4.1.6527.3.1.2.16.3.1.1		not-accessible	Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TSA tSapIngressIndex	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1	TSapIngressPolicyID	not-accessible	the policy ID is the index to this table.
ROW tSapIngressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2	RowStatus	read-create	Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable
TIT tSapIngressScope	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3	TItemScope	read-create	Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.
TIT tSapIngressDescription	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4	TItemDescription	read-create	user-provided description of the policy.
TNA tSapIngressDefaultFC	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5	TNamedItem	read-create	tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.
TPR tSapIngressDefaultFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6	TPriority	read-create	the priority to assign to traffic ingressing as the default action queue.
TMA tSapIngressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7	TMatchCriteria	read-only	indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.
TIM tSapIngressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8	TimeStamp	read-only	timestamp of last change to this row in tSapIngressTable.
TIN tSapIngressHsmdaPacketOffset	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.9	TIngressHsmdaPerPacketOffset	read-create	The value of tSapIngressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting. This object is obsoleted in 10.0 Release.
NUM tSapIngressDefFCHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.10	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDefFCHsmdaCntrOvr specifies the counter to use for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TMA tSapIngressMacCritType	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.11	TMacFilterType	read-create	tSapIngressMacCritType specifies which type of entries this mac filter can contain. If tSapIngressMacCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type vid(3) or isid(2). tSapIngressMacCritType 'isid(2)' is not supported here. If tSapIngressMacCritType is set to vid(3) the only accepted match criteria for the filter entries are: - tSapIngressMacCritInnerTagValue - tSapIngressMacCritInnerTagMask - tSapIngressMacCritOuterTagValue - tSapIngressMacCritOuterTagMask tSapIngressMacCritType can only be changed if the filter has no entries. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.
TLN tSapIngressPolicyName	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.12	TLNamedItemOrEmpty	read-create	The value of tSapIngressPolicyName specifies the name to associate with this policy.
tSapIngressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.2		not-accessible	information about all sap-ingress policies' queues.
tSapIngressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.2.1		not-accessible	Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.
TIN tSapIngressQueue	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1	TIngressQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
ROW tSapIngressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
TNA tSapIngressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TLE tSapIngressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TWE tSapIngressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
TLE tSapIngressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tSapIngressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
T/F tSapIngressQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8	TruthValue	read-create	This object specifies if this is a multicast queue or not.
INT tSapIngressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9	INTEGER	read-create	tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tSapIngressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TBU tSapIngressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object.
TBU tSapIngressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TAD tSapIngressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPI tSapIngressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15	TPIRRate	read-create	The administrative PIR specified by the user.
TCI tSapIngressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16	TCIRRate	read-create	The administrative CIR specified by the user.
TPI tSapIngressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17	TPIRRate	read-only	The operating PIR.
TCI tSapIngressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TIM tSapIngressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19	TimeStamp	read-only	timestamp of last change to this row in tSapIngressQueueTable.
T/F tSapIngressQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20	TruthValue	read-create	tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.
TQU tSapIngressQueueMode	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21	TQueueMode	read-create	tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TNA tSapIngressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22	TNamedItemOrEmpty	read-create	The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.
TBU tSapIngressQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.23	TBurstSizeBytes	read-create	The maximum amount of buffer space (in bytes) allowed for the queue.
TBU tSapIngressQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.24	TBurstLimit	read-create	The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
U32 tSapIngressQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.25	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
U32 tSapIngressQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.26	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
TBW tSapIngressQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.27	TBWRateType	read-create	The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueueAdminCIRPercent and tSapIngressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the ingress queue rates are specified in percentage. The objects tSapIngressQueueAdminCIR and tSapIngressQueueAdminPIR will be set to their default values.
TNA tSapIngressQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.28	TNamedItemOrEmpty	read-create	The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
tSapIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.3.3		not-accessible	a list of all DSCP entries for all sap-ingress policies.
tSapIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.3.3.1		not-accessible	Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).
TDS tSapIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1	TDSCPName	not-accessible
ROW tSapIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2	RowStatus	read-create	This object allows creation/deletion of rows in this table.
TNA tSapIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3	TNamedItemOrEmpty	read-create	tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressDSCPPriority	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4	TPriorityOrDefault	read-create
TIM tSapIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDSCPTable.
NUM tSapIngressDSCPHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
tSapIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.3.4		not-accessible	a list of all dot1p entries for all sap-ingress policies.
tSapIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.3.4.1		not-accessible	Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
DOT tSapIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1	Dot1PPriority	not-accessible	dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
ROW tSapIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2	RowStatus	read-create	Row Status for this sap-ingress policy's dot1p entry.
TNA tSapIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3	TNamedItemOrEmpty	read-create	tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressDot1pPriority	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4	TPriorityOrDefault	read-create	priority to use for packets that match the dot1p value tSapIngressDot1pValue.
TIM tSapIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDot1pTable.
NUM tSapIngressDot1pHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
tSapIngressIPCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.5		not-accessible	information about all sap-ingress policies' ip-criteria entries.
tSapIngressIPCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.5.1		not-accessible	Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tSapIngressIPCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1	TEntryId	not-accessible	unique identifier separates this entry from others in this policy.
ROW tSapIngressIPCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2	RowStatus	read-create	Row Status for the IP Criteria entry.
TIT tSapIngressIPCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3	TItemDescription	read-create	description of this IP criteria entry.
TNA tSapIngressIPCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4	TNamedItemOrEmpty	read-create	tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressIPCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5	TPriorityOrDefault	read-create	priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
IP tSapIngressIPCriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6	IpAddress	read-create	IP address to match with source-IP of the packet.
ADR tSapIngressIPCriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7	IpAddressPrefixLength	read-create	the prefix is the number of bits of the source IP address to match.
IP tSapIngressIPCriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8	IpAddress	read-create	IP address to match with destination-IP of the packet.
ADR tSapIngressIPCriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9	IpAddressPrefixLength	read-create	the prefix is the number of bits of the destination IP address to match.
TIP tSapIngressIPCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10	TIpProtocol	read-create	IP protocol to match. use -1 to disable matching by IP protocol.
TTC tSapIngressIPCriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
TTC tSapIngressIPCriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
TTC tSapIngressIPCriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPCriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TTC tSapIngressIPCriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TTC tSapIngressIPCriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator.
TDS tSapIngressIPCriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17	TDSCPNameOrEmpty	read-create	DSCP value to match in the packet
TIT tSapIngressIPCriteriaFragment	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19	TItemMatch	read-create	matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).
TIM tSapIngressIPCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20	TimeStamp	read-only	timestamp of last change to this row in tSapIngressIPCriteriaTable.
NUM tSapIngressIPCritHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.21	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
DOT tSapIngressIPCriteriaIpPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.31	Dot1PPriority	read-create
DOT tSapIngressIPCriteriaIpPrecMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.32	Dot1PPriority	read-create
tSapIngressMacCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.6		not-accessible	information about all sap-ingress policies' mac-criteria entries.
tSapIngressMacCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.6.1		not-accessible	Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tSapIngressMacCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1	TEntryId	not-accessible
ROW tSapIngressMacCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2	RowStatus	read-create
TIT tSapIngressMacCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3	TItemDescription	read-create
TNA tSapIngressMacCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4	TNamedItemOrEmpty	read-create	tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressMacCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5	TPriorityOrDefault	read-create
TFR tSapIngressMacCriteriaFrameType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria.
MAC tSapIngressMacCriteriaSrcMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8	MacAddress	read-create
MAC tSapIngressMacCriteriaSrcMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9	MacAddress	read-create
MAC tSapIngressMacCriteriaDstMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10	MacAddress	read-create
MAC tSapIngressMacCriteriaDstMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11	MacAddress	read-create
DOT tSapIngressMacCriteriaDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12	Dot1PPriority	read-create
DOT tSapIngressMacCriteriaDot1PMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13	Dot1PPriority	read-create
I32 tSapIngressMacCriteriaEthernetType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaDSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaDSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaSSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaSSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
I32 tSapIngressMacCriteriaSnapPid	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
INT tSapIngressMacCriteriaSnapOui	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20	INTEGER	read-create	whether to match snap-oui, and what to match.
TIM tSapIngressMacCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21	TimeStamp	read-only	timestamp of last change to this row in tSapIngressMacCriteriaTable.
OID tSapIngressMacCriteriaAtmVci	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.22	AtmVcIdentifier	read-create	The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tSapIngressMacCriteriaFrameType is not set to 'atm'.
QTA tSapIngressMacCritInnerTagValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.23	QTagFullRangeOrNone	read-create	The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no VLAN tag matching will be performed.
QTA tSapIngressMacCritInnerTagMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.24	QTagFullRange	read-create	The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
QTA tSapIngressMacCritOuterTagValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.25	QTagFullRangeOrNone	read-create	The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
QTA tSapIngressMacCritOuterTagMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.26	QTagFullRange	read-create	The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
tSapIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.3.7		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
tSapIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.3.7.1		not-accessible	Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TNA tSapIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1	TNamedItem	not-accessible	tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.
ROW tSapIngressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2	RowStatus	read-create	Row Status for this queue.
TIN tSapIngressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3	TIngressQueueId	read-create	The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used.
TIN tSapIngressFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4	TIngressQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpMCast implies that the default queues should be used.
TIN tSapIngressFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5	TIngressQueueId	read-create	The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpBCast implies that the default queues should be used.
TIN tSapIngressFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6	TIngressQueueId	read-create	The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpUnknown implies that the default queues should be used.
TIM tSapIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7	TimeStamp	read-only	tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.
TRE tSapIngressFCInProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8	TRemarkType	read-create	tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TNA tSapIngressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9	TNamedItemOrEmpty	read-create	tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.
TPR tSapIngressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10	TPrecValueOrNone	read-create	tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.
TRE tSapIngressFCOutProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11	TRemarkType	read-create	tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TNA tSapIngressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12	TNamedItemOrEmpty	read-create	tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.
TPR tSapIngressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13	TPrecValueOrNone	read-create	tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.
TPR tSapIngressFCProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14	TProfileOrNone	read-create	tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.
TIN tSapIngressFCHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.15	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressFCHsmdaMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.16	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressFCHsmdaBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.17	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
T/F tSapIngressFCDE1OutOfProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18	TruthValue	read-create	The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.
TNA tSapIngressFCQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.19	TNamedItemOrEmpty	read-create	tSapIngressFCQGrp specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpMCast	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.20	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCMCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpBCast	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.21	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCBCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpUnknown	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.22	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCUnknownQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TIN tSapIngressFCPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.23	TIngPolicerIdOrNone	read-create	tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class.
TIN tSapIngressFCMCastPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.24	TIngPolicerIdOrNone	read-create	tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class.
TIN tSapIngressFCBCastPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.25	TIngPolicerIdOrNone	read-create	tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class.
TIN tSapIngressFCUnknownPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.26	TIngPolicerIdOrNone	read-create	tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class.
T/F tSapIngressFCPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.27	TruthValue	read-create	The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies the FC to use the specific policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressFCMCastPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.28	TruthValue	read-create	The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific multicast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCMCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressFCBCastPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.29	TruthValue	read-create	The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCBCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressFCUnknownPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.30	TruthValue	read-create	The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCUnknownPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
tSapIngressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.3.8		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
tSapIngressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.3.8.1		not-accessible	Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TPR tSapIngressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1	TPrecValue	not-accessible	Precedence value for which the mapping is done.
ROW tSapIngressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2	RowStatus	read-create	Row Status for this mapping.
TNA tSapIngressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3	TNamedItemOrEmpty	read-create	tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressPrecFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4	TPriorityOrDefault	read-create	The priority to be assigned to the matching traffic.
TIM tSapIngressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressPrecTable.
NUM tSapIngressPrecHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
tSapIngressIPv6CriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.9		not-accessible	Information about all sap-ingress policies' ipv6-criteria entries.
tSapIngressIPv6CriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.9.1		not-accessible	Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tSapIngressIPv6CriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1	TEntryId	not-accessible	The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.
ROW tSapIngressIPv6CriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2	RowStatus	read-create	The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.
TIT tSapIngressIPv6CriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3	TItemDescription	read-create	The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.
TNA tSapIngressIPv6CriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressIPv6CriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
ADR tSapIngressIPv6CriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match.
ADR tSapIngressIPv6CriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match.
TIP tSapIngressIPv6CriteriaNextHeader	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10	TIpProtocol	read-create	The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
TTC tSapIngressIPv6CriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
TTC tSapIngressIPv6CriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
TTC tSapIngressIPv6CriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used.
TTC tSapIngressIPv6CriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TTC tSapIngressIPv6CriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TTC tSapIngressIPv6CriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used.
TDS tSapIngressIPv6CriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17	TDSCPNameOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet
TIM tSapIngressIPv6CriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20	TimeStamp	read-only	The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.
DOT tSapIngressIPv6CriteriaIpPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.31	Dot1PPriority	read-create
DOT tSapIngressIPv6CriteriaIpPrecMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.32	Dot1PPriority	read-create
tSapIngressHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.10		not-accessible	Information about all sap-ingress policies' HSMDA queues. This table is obsoleted in 10.0 release.
tSapIngressHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.10.1		not-accessible	Information about a particular HSMDA queue for a sap-ingress policy. Entries are created by user.
TIN tSapIngressHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.1	TIngressHsmdaQueueId	not-accessible	The HSMDA queue ID is used as the secondary index to the table entry.
ROW tSapIngressHsmdaQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.2	RowStatus	read-create	The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable.
TIM tSapIngressHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.3	TimeStamp	read-only	The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable.
TAD tSapIngressHsmdaQueueCIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.4	TAdaptationRule	read-create	The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngressHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.5	TAdaptationRule	read-create	The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
THS tSapIngressHsmdaQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.6	THsmdaPIRKRate	read-create	The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
THS tSapIngressHsmdaQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.7	THsmdaCIRKRate	read-create	The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user.
TNA tSapIngressHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.8	TNamedItem	read-create	The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
T/F tSapIngressHsmdaQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.9	TruthValue	read-create	The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. This policing function is different than the shaping function normally performed by the queues defined rate in that scheduling is not stopped for the queue when the rate is exceeded. Accordingly, tSapIngressHsmdaQueuePoliced overrides the bandwidth specified by the object tSapIngressHsmdaQueueAdminCIR.
tSapIngressLspExpTable	1.3.6.1.4.1.6527.3.1.2.16.3.11		not-accessible	This table maintains the mappings of an Lsp Exp Bit value into a forwarding class
tSapIngressLspExpEntry	1.3.6.1.4.1.6527.3.1.2.16.3.11.1		not-accessible	Information about a particular sap-ingress policy's Lsp Exp Bit values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TLS tSapIngressLspExpValue	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.1	TLspExpValue	not-accessible	The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done.
ROW tSapIngressLspExpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.2	RowStatus	read-create	The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping.
TIM tSapIngressLspExpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.3	TimeStamp	read-only	The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable.
TNA tSapIngressLspExpFC	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressLspExpFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapIngressLspExpFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic.
NUM tSapIngressLspExpHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
tSapIngPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.3.12		not-accessible	tSapIngPolicerTable defines SAP Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tSapIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
tSapIngPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.3.12.1		not-accessible	tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapIngPolicerRowStatus.
TIN tSapIngPolicerId	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1	TIngPolicerId	not-accessible	tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.
ROW tSapIngPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2	RowStatus	read-create	tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.
TIM tSapIngPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3	TimeStamp	read-only	tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIT tSapIngPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4	TItemDescription	read-create	tSapIngPolicerDescr specifies the description of the policer.
TAD tSapIngPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TNA tSapIngPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7	TNamedItemOrEmpty	read-create	tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.
TLE tSapIngPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8	TLevel	read-create	tSapIngPolicerLevel specifies the level of priority while feeding the parent.
TPO tSapIngPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9	TPolicerWeight	read-create	tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
THP tSapIngPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10	THPolPIRRate	read-create	tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tSapIngPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11	THPolCIRRate	read-create	tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user.
TMN tSapIngPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12	TmnxIngPolicerStatMode	read-create	tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.
TPL tSapIngPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13	TPlcrBurstSizeBytes	read-create	The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
TBU tSapIngPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14	TBurstPercentOrDefault	read-create	The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
TPL tSapIngPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15	TPlcrBurstSizeBytes	read-create	The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
TPE tSapIngPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16	TPerPacketOffset	read-create	tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
U32 tSapIngPolicerAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
U32 tSapIngPolicerAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
TPO tSapIngPolicerRateType	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19	TPolicerRateType	read-create	The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerAdminPIRPercent and tSapIngPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the ingress policer rates are specified in percentage. The objects tSapIngPolicerAdminPIR and tSapIngPolicerAdminCIR will be set to their default values.
U32 tSapIngPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20	Unsigned32	read-create	The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSapIngPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21	Unsigned32	read-create	The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSapIngPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22	Unsigned32	read-create	The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth up to the tSapIngPolicerSlopeMaxProb at the tSapIngPolicerSlopeMaxDepth.
TMN tSapIngPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23	TmnxSlopeMap	read-create	The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer.
TNA tSapIngPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24	TNamedItemOrEmpty	read-create	The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
T/F tSapIngPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25	TruthValue	read-create	The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
tSapIngPolicyNameTable	1.3.6.1.4.1.6527.3.1.2.16.3.13		not-accessible	A table that contains SAP ingress policy name information. Entries are created automatically by the system when tSapIngressPolicyName object is set for the SAP ingress policy.
tSapIngPolicyNameEntry	1.3.6.1.4.1.6527.3.1.2.16.3.13.1		not-accessible	Basic information about a specific SAP ingress policy name.
TSA tSapIngPolicyNameId	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.1	TSapIngressPolicyID	read-only	The value of the object tSapIngPolicyNameId specifies the policy name associated with this SAP ingress policy.
ROW tSapIngPolicyNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.2	RowStatus	read-only	This value of the object tSapIngPolicyNameRowStatus specifies the status of this row.
TIM tSapIngPolicyNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.3	TimeStamp	read-only	The value of tSapIngPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tSapEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.4
tSapEgressTable	1.3.6.1.4.1.6527.3.1.2.16.4.1		not-accessible	information about all sap-egress policies.
tSapEgressEntry	1.3.6.1.4.1.6527.3.1.2.16.4.1.1		not-accessible	Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.
TSA tSapEgressIndex	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1	TSapEgressPolicyID	not-accessible	the sap-egress policy ID is used as index for the table.
ROW tSapEgressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2	RowStatus	read-create	Row Status of this policy's entry.
TIT tSapEgressScope	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3	TItemScope	read-create	scope of the sap-egress policy.
TIT tSapEgressDescription	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4	TItemDescription	read-create	user-supplied description of this sap-egress policy.
TIM tSapEgressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressTable.
TEG tSapEgressHsmdaPacketOffset	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.6	TEgressHsmdaPerPacketOffset	read-create	The value of tSapEgressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting.
TMA tSapEgressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.7	TMatchCriteria	read-only	The value of tSapEgressMatchCriteria indicates which type of match criteria the policy should use. When tSapEgressMatchCriteria has a value of 'ip', the sap-egress policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. The value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. The value of tSapEgressMatchCriteria is set to 'none' when the last criteria table entry is removed.
TNA tSapEgressHsmdaWrrPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.8	TNamedItemOrEmpty	read-create	The value of tSapEgressHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use.
U32 tSapEgressHsmdaLowBrstMaxCls	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.9	Unsigned32	read-create	The value of tSapEgressHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. All classes starting from 1, up to and including that specified by tSapEgressHsmdaLowBrstMaxCls use the low priority burst threshold. All classes greater than the value of tSapEgressHsmdaLowBrstMaxCls up to and including class 8 use the high priority burst threshold.
TLN tSapEgressPolicyName	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.10	TLNamedItemOrEmpty	read-create	The value of tSapEgressPolicyName specifies the name to associate with this policy.
T/F tSapEgressEthernetCtag	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.11	TruthValue	read-create	The value of tSapEgressEthernetCtag specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy. The value 'true' specifies that the top customer tag will be used for egress reclassification based on dot1p criteria. The value 'false' specifies that a service delimiting tag will be used for egress reclassification based on dot1p criteria.
tSapEgressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.2		not-accessible	information about all sap-egress policies' queues.
tSapEgressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.2.1		not-accessible	Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEG tSapEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1	TEgressQueueId	not-accessible	the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.
ROW tSapEgressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2	RowStatus	read-create	Row Status of the entry.
TNA tSapEgressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TLE tSapEgressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TWE tSapEgressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
TLE tSapEgressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tSapEgressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
INT tSapEgressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8	INTEGER	read-create	tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tSapEgressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TBU tSapEgressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapEgressQueueMBSBytes object.
TBU tSapEgressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TAD tSapEgressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPI tSapEgressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14	TPIRRate	read-create	The administrative PIR specified by the user.
TCI tSapEgressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15	TCIRRate	read-create	The administrative CIR specified by the user.
TPI tSapEgressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16	TPIRRate	read-only	The administrative PIR specified by the user.
TCI tSapEgressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TIM tSapEgressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18	TimeStamp	read-only	timestamp of last change to this row in tSapEgressQueueTable.
T/F tSapEgressQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19	TruthValue	read-create	The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.
TLE tSapEgressQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20	TLevel	read-create	The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tSapEgressQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21	TWeight	read-create	The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tSapEgressQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22	TLevelOrDefault	read-create	The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tSapEgressQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23	TWeight	read-create	The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
U32 tSapEgressQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24	Unsigned32	read-create	The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
TNA tSapEgressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25	TNamedItemOrEmpty	read-create	The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
T/F tSapEgressQueueXPWredQ	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.26	TruthValue	read-create	The value of tSapEgressQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
TNA tSapEgressQueueXPWredQSlope	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.27	TNamedItem	read-create	The value of tSapEgressQueueXPWredQSlope specifies the name of the slope-policy to be applied for SAP egress queue. An 'inconsistentValue' error is returned when this object is set to a non-default value when tSapEgressQueueXPWredQ is set to 'false'.
TBU tSapEgressQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.28	TBurstSizeBytes	read-create	The maximum amount of buffer space (in bytes) allowed for the queue.
TBU tSapEgressQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.29	TBurstLimit	read-create	The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
TEG tSapEgressQueuePktOffset	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.30	TEgressQPerPacketOffset	read-create	The value of tSapEgressQueuePktOffset specifies the per packet byte offset for this queue.
U32 tSapEgressQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.31	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminPIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
U32 tSapEgressQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.32	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminCIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
TBW tSapEgressQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.33	TBWRateType	read-create	The value of tSapEgressQueueRateType specifies the type of Egress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapEgressQueueAdminCIRPercent and tSapEgressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the egress queue rates are specified in percentage. The objects tSapEgressQueueAdminCIR and tSapEgressQueueAdminPIR will be set to their default values.
TNA tSapEgressQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.34	TNamedItemOrEmpty	read-create	The value of tSapEgressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
tSapEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.4.3		not-accessible
tSapEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.4.3.1		not-accessible	Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tSapEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1	TFCName	not-accessible	forwarding class name.
ROW tSapEgressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2	RowStatus	read-create	Row Status for this queue.
TEG tSapEgressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3	TEgressQueueId	read-create	The queue to use for packets in this forwarding class. When tSapEgressFCQGrp is set to its default value, tSapEgressFCQueue represents the local queue to which traffic will be forwarded. When tSapEgressFCQGrp is set to a non-default value, tSapEgressFCQueue represents the queue within the specified queue-group to which traffic will be forwarded.
DOT tSapEgressFCDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4	Dot1PPriority	read-create	The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.
TIM tSapEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressFCTable.
TEG tSapEgressFCHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.6	TEgressHsmdaQueueId	read-create	The HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA.
T/F tSapEgressFCDot1PHsmdaProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.7	TruthValue	read-create	The value of the object tSapEgressFCDot1PHsmdaProfile specifies if the system will perform egress profiling on HSMDA queues or not. The tSapEgressFCDot1PHsmdaProfile object is obsoleted in 9.0 Release.
DOT tSapEgressFCDot1PInProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8	Dot1PPriority	read-create	The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.
DOT tSapEgressFCDot1POutProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9	Dot1PPriority	read-create	The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.
TDE tSapEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10	TDEValue	read-create	The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.
T/F tSapEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11	TruthValue	read-create	The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.
TNA tSapEgressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12	TNamedItemOrEmpty	read-create	The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TNA tSapEgressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13	TNamedItemOrEmpty	read-create	The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TPR tSapEgressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14	TPrecValueOrNone	read-create	The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TPR tSapEgressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15	TPrecValueOrNone	read-create	The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TNA tSapEgressFCQGrp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.16	TNamedItemOrEmpty	read-create	The value of tSapEgressFCQGrp specifies the tQosEgrQGroupName. When set to a non-default value, this indicates the name of the queue-group to which traffic will be forwarded.
TEG tSapEgressFCPolicer	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.17	TEgrPolicerIdOrNone	read-create	The value of tSapEgressFCPolicer specifies the SAP Egress Policer identifier. If a corresponding Sap Egress Policer Id does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error will be returned. When tSapEgressFCPolicer is set to its default value, then traffic for this forwarding class will not use policers. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to default, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a system determined queue-group queue. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a queue within the given queue-group according to the appropriate tQosEgrQGroupFCEntry. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given queue within the given queue-group. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set its default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given local queue.
TFC tSapEgressFCQGrpFC	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.18	TFCNameOrEmpty	read-create	The value of tSapEgressFCQGrpFC, when specified, will replace the forwarding class derived from ingress as the forwarding class to use inside the egress queue group. tSapEgressFCQGrpFC is only allowed to be used in conjunction with egress policers, and is mutually exclusive with direct queue-group queue mappings. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC is set to a non-default value when tSapEgressFCPolicer is set to default.
tSapEgressHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.4		not-accessible	Information about all sap-egress policies' HSMDA queues.
tSapEgressHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.4.1		not-accessible	Information about a particular HSMDA queue for a sap-egress policy. Entries are created by user.
TEG tSapEgressHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.1	TEgressHsmdaQueueId	not-accessible	The HSMDA queue ID is used as the secondary index to the table entry.
ROW tSapEgressHsmdaQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.2	RowStatus	read-create	The value of tSapEgressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapEgressHsmdaQueueTable.
TAD tSapEgressHsmdaQueueCIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.3	TAdaptationRule	read-create	The value of tSapEgressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. This object is obsoleted in 10.0 Release.
TAD tSapEgressHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.4	TAdaptationRule	read-create	The value of tSapEgressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
THS tSapEgressHsmdaQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.5	THsmdaPIRKRate	read-create	The value of tSapEgressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
THS tSapEgressHsmdaQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.6	THsmdaCIRKRate	read-create	The value of tSapEgressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 10.0 Release.
TNA tSapEgressHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.7	TNamedItem	read-create	The value of tSapEgressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
TIM tSapEgressHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.8	TimeStamp	read-only	The value of tSapEgressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapEgressHsmdaQueueTable.
THS tSapEgressHsmdaQueueWrrWeight	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.9	THsmdaWrrWeight	read-create	The value of tSapEgressHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
THS tSapEgressHsmdaQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.10	THSMDABurstSizeBytes	read-create	The value of tSapEgressHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue.
THS tSapEgressHsmdaQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.11	THSMDAQueueBurstLimit	read-create	The value of tSapEgressHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
tSapEgressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.4.5		not-accessible	a list of all DSCP entries for all sap-egress policies.
tSapEgressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.4.5.1		not-accessible	Information about a particular DSCP entry for a sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapEgressDSCP).
TDS tSapEgressDSCP	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.1	TDSCPName	not-accessible
ROW tSapEgressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.2	RowStatus	read-create	The value of tSapEgressDSCPRowStatus controls the creation/deletion of rows in this table.
TIM tSapEgressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.3	TimeStamp	read-only	The value of tSapEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
NUM tSapEgressDSCPHsmdaCntrOverride	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.4	TEgressHsmdaCounterIdOrZero	read-create	The value of the object tSapEgressDSCPHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapEgressDSCP. A value of zero implies that the default counters should be used.
TFC tSapEgressDSCPfc	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.5	TFCNameOrEmpty	read-create	The value of tSapEgressDSCPfc, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TPR tSapEgressDSCPprofile	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.6	TProfileOrNone	read-create	The value of tSapEgressDSCPprofile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
tSapEgressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.4.6		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
tSapEgressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.4.6.1		not-accessible	Information about a particular sap-egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
TPR tSapEgressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.1	TPrecValue	not-accessible	The value of tSapEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tSapEgressPrecTable.
ROW tSapEgressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.2	RowStatus	read-create	The value of tSapEgressPrecRowStatus controls the creation/deletion of rows in this table.
TIM tSapEgressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.3	TimeStamp	read-only	The value of tSapEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
NUM tSapEgressPrecHsmdaCntrOverride	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.4	TEgressHsmdaCounterIdOrZero	read-create	The value of tSapEgressPrecHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapEgressPrecValue. A value of zero implies that the default counters should be used.
TFC tSapEgressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.5	TFCNameOrEmpty	read-create	The value of tSapEgressPrecFC, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TPR tSapEgressPrecProfile	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.6	TProfileOrNone	read-create	The value of tSapEgressPrecProfile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
tSapEgrIPCritTable	1.3.6.1.4.1.6527.3.1.2.16.4.7		not-accessible	This table maintains the entries for matching criteria for IP packets on egress. In release 10.0 and higher, this table can also contain IPv6 criteria.
tSapEgrIPCritEntry	1.3.6.1.4.1.6527.3.1.2.16.4.7.1		not-accessible	Information about a particular egress IP or IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
IPt tSapEgrIPCritAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.1	InetAddressType	not-accessible	The value of tSapEgrIPCritAddrType specifies the index address type this entry should match against.
U32 tSapEgrIPCritIndex	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.2	Unsigned32	not-accessible	The value of tSapEgrIPCritIndex specifies the index for a sap-egress IP or IPv6 criteria entry.
ROW tSapEgrIPCritRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.3	RowStatus	read-create	The value of tSapEgrIPCritRowStatus is used for the creation and deletion of sap-egress IP or IPv6 criteria entries.
TIM tSapEgrIPCritLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.4	TimeStamp	read-only	The value of tSapEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tSapEgrIPCritDescription	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.5	TItemDescription	read-create	The value of tSapEgrIPCritDescription specifies a description of the sap-egress IP or IPv6 criteria entry.
NUM tSapEgrIPCritActionHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.6	TEgressHsmdaCounterIdOrZero	read-create	The value of the object tSapEgrIPCritActionHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-egress policy specified by tSapEgressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used.
IPt tSapEgrIPCritSourceIpAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.7	InetAddressType	read-create	The value of tSapEgrIPCritSourceIpAddrType specifies the address type of tSapEgrIPCritSourceIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
IP tSapEgrIPCritSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.8	InetAddress	read-create	The value of tSapEgrIPCritSourceIpAddr specifies the IP or IPv6 address to match with source-IP of the packet.
ADR tSapEgrIPCritSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.9	InetAddressPrefixLength	read-create	The value of tSapEgrIPCritSourceIpMask specifies the number of bits of the source IP or IPv6 address to match.
IPt tSapEgrIPCritDestIpAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.10	InetAddressType	read-create	The value of tSapEgrIPCritDestIpAddrType specifies the address type of tSapEgrIPCritDestIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
IP tSapEgrIPCritDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.11	InetAddress	read-create	The value of tSapEgrIPCritDestIpAddr specifies the IP or IPv6 address to match with destination-IP of the packet.
ADR tSapEgrIPCritDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.12	InetAddressPrefixLength	read-create	The value of tSapEgrIPCritDestIpMask specifies the number of bits of the destination IP or IPv6 address to match.
TIP tSapEgrIPCritProtocol	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.13	TIpProtocol	read-create	The value of tSapEgrIPCritProtocol specifies the IP protocol or IPv6 next-header to match. The value '-1' is used to disable matching by IP protocol or IPv6 next-header. When this value specifies an IPv6 next-header, since the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
TTC tSapEgrIPCritSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.14	TTcpUdpPort	read-create	The value of tSapEgrIPCritSourcePortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
TTC tSapEgrIPCritSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.15	TTcpUdpPort	read-create	The value of tSapEgrIPCritSourcePortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
TTC tSapEgrIPCritSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.16	TTcpUdpPortOperator	read-create	The value of tSapEgrIPCritSourcePortOperator specifies the manner in which tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 are to be used.
TTC tSapEgrIPCritDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.17	TTcpUdpPort	read-create	The value of tSapEgrIPCritDestPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
TTC tSapEgrIPCritDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.18	TTcpUdpPort	read-create	The value of tSapEgrIPCritDestPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
TTC tSapEgrIPCritDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.19	TTcpUdpPortOperator	read-create	The value of tSapEgrIPCritDestPortOperator specifies the manner in which tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue2 are to be used.
TDS tSapEgrIPCritDSCP	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.20	TDSCPNameOrEmpty	read-create	The value of tSapEgrIPCritDSCP specifies the DSCP value to match in the packet
TIT tSapEgrIPCritFragment	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.21	TItemMatch	read-create	The value of tSapEgrIPCritFragment specifies fragmented packet matching. If the value is 'true', only fragmented packets match. If the value is 'false', only non-fragmented packets match. If the value is 'off', all packets match regardless. This field is only relevant for ipv4. An inconsistentValue error is returned when the value of tSapEgrIPCritFragment is not 'off' and the value of tSapEgrIPCritAddrType is not 'ipv4'.
TFC tSapEgrIPCritActionFC	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.22	TFCNameOrEmpty	read-create	tSapEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP or IPv6 criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions.
TPR tSapEgrIPCritActionProfile	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.23	TProfileOrNone	read-create	tSapEgrIPCritActionProfile specifies the profile of the traffic that matches the specific IP or IPv6 criteria. The value none indicates that the profile is derived from ingress classification and profiling functions.
tSapEgrPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.4.8		not-accessible	tSapEgrPolicerTable defines SAP Egress Policer Table for providing, via SNMP, the capability of defining the policers. tSapEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapEgressFCTable.
tSapEgrPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.4.8.1		not-accessible	tSapEgrPolicerEntry defines an entry in the tSapEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapEgrPolicerRowStatus.
TEG tSapEgrPolicerId	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.1	TEgrPolicerId	not-accessible	tSapEgrPolicerId defines the SAP Egress Policer identifier. It identifies an sap-egress policer in the managed system.
ROW tSapEgrPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.2	RowStatus	read-create	tSapEgrPolicerRowStatus allows entries to be created and deleted in the tSapEgrPolicerTable.
TIM tSapEgrPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.3	TimeStamp	read-only	tSapEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIT tSapEgrPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.4	TItemDescription	read-create	tSapEgrPolicerDescr specifies the description of the policer.
TAD tSapEgrPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgrPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TNA tSapEgrPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.7	TNamedItemOrEmpty	read-create	tSapEgrPolicerParent specifies the scheduler to which this queue would be feeding.
TLE tSapEgrPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.8	TLevel	read-create	tSapEgrPolicerLevel specifies the level of priority while feeding the parent.
TPO tSapEgrPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.9	TPolicerWeight	read-create	tSapEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
THP tSapEgrPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.10	THPolPIRRate	read-create	tSapEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tSapEgrPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.11	THPolCIRRate	read-create	tSapEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
TMN tSapEgrPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.12	TmnxEgrPolicerStatMode	read-create	tSapEgrPolicerStatMode specifies the mode of statistics collected by this policer.
TPL tSapEgrPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.13	TPlcrBurstSizeBytes	read-create	The tSapEgrPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
TBU tSapEgrPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.14	TBurstPercentOrDefault	read-create	The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
TPL tSapEgrPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.15	TPlcrBurstSizeBytes	read-create	The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
TPE tSapEgrPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.16	TPerPacketOffset	read-create	tSapEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
U32 tSapEgrPolicerAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
U32 tSapEgrPolicerAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.18	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
TPO tSapEgrPolicerRateType	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.19	TPolicerRateType	read-create	The value of tSapEgrPolicerRateType specifies the type of egress policer rate. When the value of the object is set to 'kbps', the egresss policer rates are specified in kbps. The objects tSapEgrPolicerAdminPIRPercent and tSapEgrPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the egress policer rates are specified in percentage. The objects tSapEgrPolicerAdminPIR and tSapEgrPolicerAdminCIR will be set to their default values.
U32 tSapEgrPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.20	Unsigned32	read-create	The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSapEgrPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.21	Unsigned32	read-create	The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSapEgrPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.22	Unsigned32	read-create	The value of tSapEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapEgrPolicerSlopeStartDepth up to the tSapEgrPolicerSlopeMaxProb at the tSapEgrPolicerSlopeMaxDepth.
TMN tSapEgrPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.23	TmnxSlopeMap	read-create	The value of tSapEgrPolicerSlopeMap specifies the slope map to be used with this policer.
TNA tSapEgrPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.24	TNamedItemOrEmpty	read-create	The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
T/F tSapEgrPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.25	TruthValue	read-create	The value of tSapEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tSapEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
tSapEgrPolicyNameTable	1.3.6.1.4.1.6527.3.1.2.16.4.9		not-accessible	A table that contains SAP egress policy name information. Entries are created automatically by the system when tSapEgressPolicyName object is set for the SAP egress policy.
tSapEgrPolicyNameEntry	1.3.6.1.4.1.6527.3.1.2.16.4.9.1		not-accessible	Basic information about a specific SAP egress policy name.
TSA tSapEgrPolicyNameId	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.1	TSapEgressPolicyID	read-only	The value of the object tSapEgrPolicyNameId specifies the policy name associated with this SAP egress policy.
ROW tSapEgrPolicyNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.2	RowStatus	read-only	This value of the object tSapEgrPolicyNameRowStatus specifies the status of this row.
TIM tSapEgrPolicyNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.3	TimeStamp	read-only	The value of tSapEgrPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tSapEgressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.4.10		not-accessible	A table that contains the list of all dot1p entries for all sap-egress policies.
tSapEgressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.4.10.1		not-accessible	Information about a particular dot1p match for a sap-egress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
DOT tSapEgressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.1	Dot1PPriority	not-accessible	The value of tSapEgressDot1pValue specifies the dotp value to match in the packet. This value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
ROW tSapEgressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.2	RowStatus	read-create	tSapEgressDot1pRowStatus allows entries to be created and deleted in the tSapEgressDot1pTable.
TIM tSapEgressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.3	TimeStamp	read-only	The value of tSapEgressDot1pLastChanged indicates the sysUpTime at the time of the last modification of this entry.
TNA tSapEgressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.4	TNamedItemOrEmpty	read-create	The value of tSapEgressDot1pFC specifies the forwarding class to be used to classify all the traffic that matches the Dot1p value specified by tSapEgressDot1pValue. Unless tSapEgressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
TPR tSapEgressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.5	TProfileUseDEOrNone	read-create	The value of tSapEgressDot1pProfile specifies the profile to use for packets that match the dot1p value specified by tSapEgressDot1pValue.
tNetworkObjects	1.3.6.1.4.1.6527.3.1.2.16.5
tNetworkPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.5.1		not-accessible
tNetworkPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.5.1.1		not-accessible	Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.
TNE tNetworkPolicyIndex	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1	TNetworkPolicyID	not-accessible
ROW tNetworkPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2	RowStatus	read-create
TIT tNetworkPolicyScope	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5	TItemScope	read-create
TIT tNetworkPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6	TItemDescription	read-create	tNetworkPolicyDescription holds the description for this policy.
TFC tNetworkPolicyIngressDefaultActionFC	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7	TFCName	read-create	tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.
TPR tNetworkPolicyIngressDefaultActionProfile	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8	TProfileOrDei	read-create	tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.
T/F tNetworkPolicyEgressRemark	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9	TruthValue	read-create	The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.
TIM tNetworkPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10	TimeStamp	read-only	Timestamp of last change to this row in tNetworkPolicyTable.
T/F tNetworkPolicyIngressLerUseDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11	TruthValue	read-create	The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.
T/F tNetworkPolicyEgressRemarkDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.12	TruthValue	read-create	The value of tNetworkPolicyEgressRemarkDscp object specifies whether DSCP bits in the internal IP header should be remarked. This object is valid only when tNetworkPolicyEgressRemark is set to 'true'.
tNetworkIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.2		not-accessible
tNetworkIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.2.1		not-accessible	Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TDS tNetworkIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1	TDSCPName	not-accessible
ROW tNetworkIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2	RowStatus	read-create
TFC tNetworkIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3	TFCName	read-create
TPR tNetworkIngressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
TIM tNetworkIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDSCPTable.
tNetworkIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.5.3		not-accessible
tNetworkIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.5.3.1		not-accessible	Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
DOT tNetworkIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1	Dot1PPriority	not-accessible
ROW tNetworkIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2	RowStatus	read-create
TFC tNetworkIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3	TFCName	read-create
TDE tNetworkIngressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4	TDEProfileOrDei	read-create	there is no DEFVAL for this object. It must be deliberately set before activating the row.
TIM tNetworkIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDot1pTable.
tNetworkIngressLSPEXPTable	1.3.6.1.4.1.6527.3.1.2.16.5.4		not-accessible
tNetworkIngressLSPEXPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.4.1		not-accessible	Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TLS tNetworkIngressLSPEXP	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1	TLspExpValue	not-accessible
ROW tNetworkIngressLSPEXPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2	RowStatus	read-create
TFC tNetworkIngressLSPEXPFC	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3	TFCName	read-create
TPR tNetworkIngressLSPEXPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
TIM tNetworkIngressLSPEXPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressLSPEXPTable.
tNetworkEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.7		not-accessible	Information about all network policies' egress FC traffic disposition.
tNetworkEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.7.1		not-accessible	Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1	TFCName	not-accessible	the name of the forwarding class (FC).
TDS tNetworkEgressFCDSCPInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2	TDSCPNameOrEmpty	read-write	the DSCP to use for in-profile traffic.
TDS tNetworkEgressFCDSCPOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3	TDSCPNameOrEmpty	read-write	the DSCP to use for out-of-profile traffic.
TLS tNetworkEgressFCLspExpInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4	TLspExpValue	read-write	the lsp-exp value to use for in-profile traffic.
TLS tNetworkEgressFCLspExpOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5	TLspExpValue	read-write	the lsp-exp value to use for out-of-profile traffic.
DOT tNetworkEgressFCDot1pInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6	Dot1PPriority	read-write	the Dot1p to use for in-profile traffic.
DOT tNetworkEgressFCDot1pOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7	Dot1PPriority	read-write	the Dot1p to use for out-of-profile traffic.
TIM tNetworkEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8	TimeStamp	read-only	timestamp of last change to this row in tNetworkEgressFCTable.
TDE tNetworkEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9	TDEValue	read-write	The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.
T/F tNetworkEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10	TruthValue	read-write	The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.
TEG tNetworkEgressFCQGrpQueue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.11	TEgressQueueId	read-write	tNetworkEgressFCQGrpQueue specifies the specific queue from queue-group TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this forwarding class.
TEG tNetworkEgressFCQGrpPolicer	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.12	TEgrPolicerIdOrNone	read-write	The value of tNetworkEgressFCQGrpPolicer specifies the policer from queue-group to be used for packets in this forwarding class.
tNetworkIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.8		not-accessible	Information about all network policies' ingress FC traffic disposition.
tNetworkIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.8.1		not-accessible	Information about a particular network policy's ingress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TFC tNetworkIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.1	TFCName	not-accessible	The value of tNetworkIngressFCName specifies the name of the forwarding class (FC).
TIM tNetworkIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.2	TimeStamp	read-only	The value of tNetworkIngressFCLastChanged indicates the sysUpTime for the last change to this entry.
TIN tNetworkIngressFCMultiCastPlcr	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.3	TIngPolicerIdOrNone	read-write	The value of tNetworkIngressFCMultiCastPlcr specifies the policer to be used for multicast traffic for this forwarding-class.
TIN tNetworkIngressFCUniCastPlcr	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.4	TIngPolicerIdOrNone	read-write	The value of tNetworkIngressFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding-class.
tNetworkEgressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.9		not-accessible	tNetworkEgressDSCPTable lists all DSCP entries for all network egress policies.
tNetworkEgressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.9.1		not-accessible	The tNetworkEgressDSCPEntry defines a particular DSCP entry for a network egress policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. In the event that one policy has multiple entries, and the tNetworkEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tNetworkEgressDSCP).
TDS tNetworkEgressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.1	TDSCPName	not-accessible	The value of tNetworkEgressDSCP indicates the DSCP value for which the mapping is done. It is used as a secondary index for tNetworkEgressDSCPTable.
ROW tNetworkEgressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.2	RowStatus	read-create	The value of tNetworkEgressDSCPRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressDSCPProfile must be specified when row is created.
TIM tNetworkEgressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.3	TimeStamp	read-only	The value of tNetworkEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TFC tNetworkEgressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.4	TFCName	read-create	The value of tNetworkEgressDSCPFC will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TPR tNetworkEgressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.5	TProfile	read-create	The value of tNetworkEgressDSCPProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressDSCPProfile. It must be set at the time of row creation.
tNetworkEgressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.5.10		not-accessible	The tNetworkEgressPrecTable table maintains the mapping of a particular precedence value into a forwarding class
tNetworkEgressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.5.10.1		not-accessible	The tNetworkEgressPrecEntry defines a particular network egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user.
TPR tNetworkEgressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.1	TPrecValue	not-accessible	The value of tNetworkEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tNetworkEgressPrecTable.
ROW tNetworkEgressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.2	RowStatus	read-create	The value of tNetworkEgressPrecRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressPrecProfile must be specified when row is created.
TIM tNetworkEgressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.3	TimeStamp	read-only	The value of tNetworkEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TFC tNetworkEgressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.4	TFCName	read-create	The value of tNetworkEgressPrecFC will overwrite the forwarding class derived from egress. The new forwarding class is used for egress remarking and queue mapping decisions.
TPR tNetworkEgressPrecProfile	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.5	TProfile	read-create	The value of tNetworkEgressPrecProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the egress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressPrecProfile. It must be set at the time of row creation.
tNetworkQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.6
tNetworkQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.6.1		not-accessible
tNetworkQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.6.1.1		not-accessible
TNA tNetworkQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1	TNamedItem	not-accessible
ROW tNetworkQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2	RowStatus	read-create
TIT tNetworkQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3	TItemDescription	read-create
TIM tNetworkQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8	TimeStamp	read-only
TNA tNetworkQueuePolicyEHWrrPlcy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.9	TNamedItemOrEmpty	read-create	The value of tNetworkQueuePolicyEHWrrPlcy specifies the Weighted Round Robin (WRR) policy to use on this HSMDA egress queue.
TPE tNetworkQueuePolicyEHPktBOffst	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.10	TPerPacketOffset	read-create	The value of tNetworkQueuePolicyEHPktBOffst specifies the packet byte offset to use for the HSMDA egress queues. This value is used for the adjustment to make to the size of each packet for HSMDA queue accounting.
tNetworkQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.2		not-accessible
tNetworkQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.2.1		not-accessible
TQU tNetworkQueue	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1	TQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
ROW tNetworkQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
TNA tNetworkQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3	TNamedItemOrEmpty	read-create	The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.
TNA tNetworkQueueParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TLE tNetworkQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TWE tNetworkQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
TLE tNetworkQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tNetworkQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
T/F tNetworkQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9	TruthValue	read-create	This object specifies if this is a multicast queue or not.
INT tNetworkQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10	INTEGER	read-create	tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TRA tNetworkQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11	TRatePercent	read-create	The percentage of max rate allowed.
TPI tNetworkQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12	TPIRRatePercent	read-create	The percentage of max rate allowed.
TBU tNetworkQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
TBU tNetworkQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
TBU tNetworkQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TIM tNetworkQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16	TimeStamp	read-only	The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.
T/F tNetworkQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17	TruthValue	read-create	The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.
TLE tNetworkQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18	TLevel	read-create	The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tNetworkQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19	TWeight	read-create	The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tNetworkQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20	TLevelOrDefault	read-create	The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tNetworkQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21	TWeight	read-create	The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
U32 tNetworkQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22	Unsigned32	read-create	The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
TAD tNetworkQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23	TAdaptationRule	read-create	The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TAD tNetworkQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24	TAdaptationRule	read-create	The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
tNetworkQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.6.3		not-accessible
tNetworkQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.6.3.1		not-accessible
TFC tNetworkQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1	TFCName	not-accessible	Forwarding class name.
ROW tNetworkQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2	RowStatus	read-create	Row Status for this queue.
TQU tNetworkQueueFC	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3	TQueueId	read-create	The specific queue to be used for packets in this forwarding class.
TQU tNetworkQueueFCMCast	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4	TQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.
TIM tNetworkQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7	TimeStamp	read-only	timestamp of last change to this row in tNetworkQueueFCTable.
TQU tNetworkQueueFCEgrHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.8	TQueueId	read-create	The value of tNetworkQueueFCEgrHsmdaQueue specifies the egress hsmda queue to be used for packets in this forwarding class. This is only applicable on supported hsmda ports.
tNetworkEgrHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.4		not-accessible	The tNetworkEgrHsmdaQueueTable contains the information about all network egress policies on HSMDA queues. Entries in this table are created whenever a network queue policy is created in tNetworkQueuePolicyEntry.
tNetworkEgrHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.4.1		not-accessible	Each entry in tNetworkEgrHsmdaQueueEntry represents the information about a particular HSMDA queue for a network egress policy specified by tNetworkEgrHsmdaQueue.
TEG tNetworkEgrHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.1	TEgressHsmdaQueueId	not-accessible	The value of tNetworkEgrHsmdaQueue indicates the HSMDA queue ID used as the secondary index to the table entry.
U32 tNetworkEgrHsmdaQueuePIRPercent	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.2	Unsigned32	read-write	The value of tNetworkEgrHsmdaQueuePIRPercent specifies the queue's PIR expressed as a percentage of port line rate.
TAD tNetworkEgrHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.3	TAdaptationRule	read-write	The value of tNetworkEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
THS tNetworkEgrHsmdaQueueWrrWeight	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.4	THsmdaWrrWeight	read-write	The value of tNetworkEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
THS tNetworkEgrHsmdaQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.5	THSMDABurstSizeBytes	read-write	The value of tNetworkEgrHsmdaQueueMBS specifies the maximum amount of buffer space, in bytes, allowed for this network egress HSMDA queue.
TNA tNetworkEgrHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.6	TNamedItem	read-write	The value of tNetworkEgrHsmdaQueueSlopePolicy specifies the slope policy on this network egress HSMDA queue. The slope policy defines the WRED slope behavior for this queue.
TIM tNetworkEgrHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.7	TimeStamp	read-only	The value of tNetworkEgrHsmdaQueueLastChanged indicates the sysUpTime for the last change to this row.
THS tNetworkEgrHsmdaQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.8	THSMDAQueueBurstLimit	read-write	The value of tNetworkEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
tSharedQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.7
tSharedQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.7.1		not-accessible	Defines the Alcatel-Lucent SROS series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.
tSharedQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.7.1.1		not-accessible	Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.
TNA tSharedQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.1	TNamedItem	not-accessible	tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.
ROW tSharedQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.2	RowStatus	read-create	tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.
TIM tSharedQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.3	TimeStamp	read-only	tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.
TIT tSharedQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.4	TItemDescription	read-create	tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.
tSharedQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.2		not-accessible	Defines the Alcatel-Lucent SROS series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.
tSharedQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.2.1		not-accessible	Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.
TQU tSharedQueueId	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.1	TQueueId	not-accessible	tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.
ROW tSharedQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.2	RowStatus	read-create	tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.
TIM tSharedQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.3	TimeStamp	read-only	tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TNA tSharedQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.4	TNamedItemOrEmpty	read-create	tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.
TNA tSharedQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.5	TNamedItemOrEmpty	read-create	tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated.
TLE tSharedQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.6	TLevel	read-create	tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate.
TWE tSharedQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.7	TWeight	read-create	tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate.
TLE tSharedQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.8	TLevelOrDefault	read-create	tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate.
TWE tSharedQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.9	TWeight	read-create	tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate.
INT tSharedQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.10	INTEGER	read-create	tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.
TRA tSharedQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.11	TRatePercent	read-create	tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.
TPI tSharedQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.12	TPIRRatePercent	read-create	tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.
TBU tSharedQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.13	TBurstPercent	read-create	tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.
TBU tSharedQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.14	TBurstPercent	read-create	tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.
TBU tSharedQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.15	TBurstPercentOrDefault	read-create	tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue.
T/F tSharedQueueIsMultipoint	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.16	TruthValue	read-create	The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be modified at row creation time; any attempt to set it after creation is silently ignored.
tSharedQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.3		not-accessible	Defines the Alcatel-Lucent SROS series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.
tSharedQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.3.1		not-accessible	Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.
TFC tSharedQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.1	TFCName	not-accessible	tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.
ROW tSharedQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.2	RowStatus	read-create	tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.
TIM tSharedQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.3	TimeStamp	read-only	tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.
TQU tSharedQueueFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.4	TQueueId	read-create	tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.
TQU tSharedQueueFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.5	TQueueId	read-create	The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.
TQU tSharedQueueFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.6	TQueueId	read-create	The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use.
TQU tSharedQueueFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.7	TQueueId	read-create	The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.
tQosIngQGroupTable	1.3.6.1.4.1.6527.3.1.2.16.7.4		not-accessible	tQosIngQGroupTable defines Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosIngQueueTable. tQosIngQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
tQosIngQGroupEntry	1.3.6.1.4.1.6527.3.1.2.16.7.4.1		not-accessible	tQosIngQGroupEntry defines an entry in the tQosIngQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosIngQGroupRowStatus.
TNA tQosIngQGroupName	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.1	TNamedItem	not-accessible	tQosIngQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
ROW tQosIngQGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.2	RowStatus	read-create	tQosIngQGroupRowStatus allows entries to be created and deleted in the tQosIngQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
TIM tQosIngQGroupLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.3	TimeStamp	read-only	tQosIngQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TIT tQosIngQGroupDescr	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.4	TItemDescription	read-create	tQosIngQGroupDescr specifies the description of the queue-group.
tQosIngQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.5		not-accessible	tQosIngQueueTable defines all ingress queues.
tQosIngQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.5.1		not-accessible	tQosIngQueueEntry defines a particular ingress queue. Entries are created by user by setting tQosIngQueueRowStatus.
TIN tQosIngQueue	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.1	TIngressQueueId	not-accessible	tQosIngQueue specifies the queue ID which is used as the secondary index to the table entry.
ROW tQosIngQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.2	RowStatus	read-create	tQosIngQueueRowStatus is the Row-Status of the entry. This allows creation/deletion of rows in this table.
TNA tQosIngQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.3	TNamedItemOrEmpty	read-create	tQosIngQueueParent specifies the scheduler to which this queue would be feeding.
TLE tQosIngQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.4	TLevel	read-create	tQosIngQueueLevel specifies the level of priority while feeding the parent.
TWE tQosIngQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.5	TWeight	read-create	tQosIngQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TLE tQosIngQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.6	TLevelOrDefault	read-create	tQosIngQueueCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tQosIngQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.7	TWeight	read-create	tQosIngQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
T/F tQosIngQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.8	TruthValue	read-create	tQosIngQueueMCast specifies if this is a multicast queue.
INT tQosIngQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.9	INTEGER	read-create	tQosIngQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TBU tQosIngQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.10	TBurstSize	read-create	tQosIngQueueCBS specifies the amount of reserved buffer space for the queue.
TBU tQosIngQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.11	TBurstSize	read-create	tQosIngQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosIngQueueMBSBytes object.
TBU tQosIngQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.12	TBurstPercentOrDefault	read-create	tQosIngQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
TAD tQosIngQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.13	TAdaptationRule	read-create	tQosIngQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosIngQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.14	TAdaptationRule	read-create	tQosIngQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPI tQosIngQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.15	TPIRRate	read-create	tQosIngQueueAdminPIR specifies the administrative PIR specified by the user.
TCI tQosIngQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.16	TCIRRate	read-create	tQosIngQueueAdminCIR specifies the administrative CIR specified by the user.
TIM tQosIngQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.17	TimeStamp	read-only	tQosIngQueueLastChanged specifies the timestamp of last change to this row in tQosIngQueueTable.
T/F tQosIngQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.18	TruthValue	read-create	tQosIngQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tQosIngQueuePoliced overrides the bandwidth specified by the object tQosIngQueueAdminCIR.
TQU tQosIngQueueMode	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.19	TQueueMode	read-create	tQosIngQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TNA tQosIngQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.20	TNamedItemOrEmpty	read-create	tQosIngQueuePoolName specifies the name of the pool to be applied for the ingress queue.
TBU tQosIngQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.21	TBurstSizeBytes	read-create	tQosIngQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
TBU tQosIngQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.22	TBurstLimit	read-create	The value of tQosIngQueueBurstLimit specifies the explicit shaping burst size of a queue.
TNA tQosIngQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.23	TNamedItemOrEmpty	read-create	The value of tQosIngQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
tQosEgrQGroupTable	1.3.6.1.4.1.6527.3.1.2.16.7.6		not-accessible	tQosEgrQGroupTable defines the Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosEgrQueueTable. tQosEgrQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
tQosEgrQGroupEntry	1.3.6.1.4.1.6527.3.1.2.16.7.6.1		not-accessible	tQosEgrQGroupEntry defines an entry in the tQosEgrQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosEgrQGroupRowStatus.
TNA tQosEgrQGroupName	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.1	TNamedItem	not-accessible	tQosEgrQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
ROW tQosEgrQGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.2	RowStatus	read-create	tQosEgrQGroupRowStatus allows entries to be created and deleted in the tQosEgrQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
TIM tQosEgrQGroupLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.3	TimeStamp	read-only	tQosEgrQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TIT tQosEgrQGroupDescr	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.4	TItemDescription	read-create	tQosEgrQGroupDescr specifies the description of the queue-group.
tQosEgrQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.7		not-accessible	tQosEgrQueueTable defines all egress queues.
tQosEgrQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.7.1		not-accessible	tQosEgrQueueEntry defines a particular egress queue. Entries are created and deleted by user.
TEG tQosEgrQueue	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.1	TEgressQueueId	not-accessible	The value of tQosEgrQueue identifies the queue index which is used as the second index to the table entry. Zero is not allowed.
ROW tQosEgrQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.2	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
TNA tQosEgrQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.3	TNamedItemOrEmpty	read-create	The value of tQosEgrQueueParent specifies the scheduler to which this queue would be feeding.
TLE tQosEgrQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.4	TLevel	read-create	The value of tQosEgrQueueLevel specifies the level of priority while feeding the parent.
TWE tQosEgrQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.5	TWeight	read-create	The value of tQosEgrQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TLE tQosEgrQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.6	TLevelOrDefault	read-create	The value of tQosEgrQueueCIRLevel specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tQosEgrQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.7	TWeight	read-create	The value of tQosEgrQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
INT tQosEgrQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.8	INTEGER	read-create	The value of tQosEgrQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers.
TBU tQosEgrQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.9	TBurstSize	read-create	The value of tQosEgrQueueCBS specifies the amount of reserved buffer space for the queue.
TBU tQosEgrQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.10	TBurstSize	read-create	The value of tQosEgrQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosEgrQueueMBSBytes object.
TBU tQosEgrQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.11	TBurstPercentOrDefault	read-create	The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
TAD tQosEgrQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.12	TAdaptationRule	read-create	The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosEgrQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.13	TAdaptationRule	read-create	The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TPI tQosEgrQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.14	TPIRRate	read-create	The value of tQosEgrQueueAdminPIR specifies the administrative PIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
TCI tQosEgrQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.15	TCIRRate	read-create	The value of tQosEgrQueueAdminCIR specifies the administrative CIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
TIM tQosEgrQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.18	TimeStamp	read-only	The value of tQosEgrQueueLastChanged indicates the timestamp of last change to this row in tQosEgrQueueTable.
T/F tQosEgrQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.19	TruthValue	read-create	The value of tQosEgrQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tQosEgrQueueParent. Only one kind of parent is allowed.
TLE tQosEgrQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.20	TLevel	read-create	The value of the object tQosEgrQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tQosEgrQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.21	TWeight	read-create	The value of the object tQosEgrQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tQosEgrQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.22	TLevelOrDefault	read-create	The value of the object tQosEgrQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tQosEgrQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.23	TWeight	read-create	The value of the object tQosEgrQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TNA tQosEgrQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.24	TNamedItemOrEmpty	read-create	The value of tQosEgrQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
T/F tQosEgrQueueXPWredQ	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.25	TruthValue	read-create	The value of tQosEgrQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
TNA tQosEgrQueueXPWredQSlope	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.26	TNamedItem	read-create	The value of tQosEgrQueueXPWredQSlope specifies the name of the slope-policy to be applied for QOS egress queue. When tQosEgrQueueXPWredQ has the value 'false', an 'inconsistentValue' error is returned if an attempt is made to set this object to a value other than 'default'.
TBU tQosEgrQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.27	TBurstSizeBytes	read-create	The value of tQosEgrQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
U32 tQosEgrQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.28	Unsigned32	read-create	The value of tQosEgrQueueAdminPIRPercent specifies the administrative PIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
U32 tQosEgrQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.29	Unsigned32	read-create	The value of tQosEgrQueueAdminCIRPercent specifies the administrative CIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
TRA tQosEgrQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.30	TRateType	read-create	The value of tQosEgrQueueRateType specifies the type of Egress queue rate. When the value of the object is set to 'kbps', the egresss queue rates are specified in kbps. The objects tQosEgrQueueAdminCIRPercent and tQosEgrQueueAdminPIRPercent will be set to their default values. When the value of the object is set to 'percent', the egress queue rates are specified in percentage. The objects tQosEgrQueueAdminCIR and tQosEgrQueueAdminPIR will be set to their default values.
TBU tQosEgrQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.31	TBurstLimit	read-create	The value of tQosEgrQueueBurstLimit specifies the explicit shaping burst size of a queue.
TNA tQosEgrQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.32	TNamedItemOrEmpty	read-create	The value of tQosEgrQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TPE tQosEgrQueuePktOffset	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.33	TPerPacketOffset	read-create	The value of tQosEgrQueuePktOffset specifies the packet byte offset to be applied with this queue.
tQosEgrQGroupFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.8		not-accessible	This table maintains the information of forwarding classes in a egress queue group.
tQosEgrQGroupFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.8.1		not-accessible	Information about a particular queue group's forwarding class.
TFC tQosEgrQGroupFCName	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.1	TFCName	not-accessible	The value of the object tQosEgrQGroupFCName specifies the name of the forwarding class
ROW tQosEgrQGroupFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.2	RowStatus	read-create	The value of tQosEgrQGroupFCRowStatus specifies the Row Status for this entry.
TIM tQosEgrQGroupFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.3	TimeStamp	read-only	The value of tQosEgrQGroupFCLastChanged indicates the timestamp of last change to this row in tQosEgrQGroupFCTable.
TEG tQosEgrQGroupFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.4	TEgressQueueId	read-create	The value of tQosEgrQGroupFCQueue specifies the queue to be used for the packets in this forwarding class.
tSlopeObjects	1.3.6.1.4.1.6527.3.1.2.16.10
tSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.1		not-accessible	Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
tSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.1.1		not-accessible	Slope Policy Entry.
TNA tSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1	TNamedItem	not-accessible	tSlopePolicy maintains the name of the slope policy identifying the policy.
ROW tSlopeRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
TIT tSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3	TItemDescription	read-create	User-provided description of the policy.
INT tSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4	INTEGER	read-create	tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.
U32 tSlopeHiStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSlopeHiMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.
INT tSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8	INTEGER	read-create	tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.
U32 tSlopeLoStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSlopeLoMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.
U32 tSlopeTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12	Unsigned32	read-create	The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.
TIM tSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13	TimeStamp	read-only	Timestamp of when this entry was last changed.
tHsmdaSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.2		not-accessible	The tHsmdaSlopePolicyTable has an entry for each HSMDA slope policy configured on this system.
tHsmdaSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.2.1		not-accessible	Each row represents a particular HSMDA slope policy. Entries are created and deleted by the user.
TNA tHsmdaSlopePolicyName	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.1	TNamedItem	not-accessible	The value of tHsmdaSlopePolicyName specifies the name of the HSMDA slope policy.
ROW tHsmdaSlopePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.2	RowStatus	read-create	The value of tHsmdaSlopePolicyRowStatus is used for the creation and deletion of HSMDA slope policies.
TIM tHsmdaSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.3	TimeStamp	read-only	The value of tHsmdaSlopeLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tHsmdaSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.4	TItemDescription	read-create	The value of tHsmdaSlopeDescription specifies the description of this HSMDA slope policy.
U32 tHsmdaSlopeQueueMbs	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.5	Unsigned32	read-create	The value of tHsmdaSlopeQueueMbs specifies the maximum amount of buffer space, in bytes, allowed for any HSMDA queue associated with this HSMDA slope policy. Specifying a value of 0 effectively disables all queues associated with this slope policy causing each queue to discard all packets. This object is obsoleted in 10.0 Release.
TMN tHsmdaSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.6	TmnxEnabledDisabled	read-create	The value of tHsmdaSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tHsmdaSlopeHiAdminStatus is set to 'disabled', the RED slope is inactive.
U32 tHsmdaSlopeHiStartDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.7	Unsigned32	read-create	The value of tHsmdaSlopeHiStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tHsmdaSlopeHiMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.8	Unsigned32	read-create	The value of tHsmdaSlopeHiMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tHsmdaSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.9	Unsigned32	read-create	The value of tHsmdaSlopeHiMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeHiMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeHiStartDepth up to the tHsmdaSlopeHiMaxProbability at the tHsmdaSlopeHiMaxDepth.
TMN tHsmdaSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.10	TmnxEnabledDisabled	read-create	The value of tHsmdaSlopeLoAdminStatus specifies the admin state for the low priority RED slope. If the tHsmdaSlopeLoAdminStatus is set to 'disabled', the RED slope is inactive.
U32 tHsmdaSlopeLoStartDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.11	Unsigned32	read-create	The value of tHsmdaSlopeLoStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tHsmdaSlopeLoMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.12	Unsigned32	read-create	The value of tHsmdaSlopeLoMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tHsmdaSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.13	Unsigned32	read-create	The value of tHsmdaSlopeLoMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeLoMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeLoStartDepth up to the tHsmdaSlopeLoMaxProbability at the tHsmdaSlopeLoMaxDepth.
tSchedulerObjects	1.3.6.1.4.1.6527.3.1.2.16.12
tSchedulerPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.12.1		not-accessible
tSchedulerPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.1.1		not-accessible	Information about a particular Scheduler Policy.
TNA tSchedulerPolicyName	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1	TNamedItem	not-accessible	Name of the scheduler policy.
ROW tSchedulerPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2	RowStatus	read-create	Row Status of the entry.
TIT tSchedulerPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3	TItemDescription	read-create	Description for the scheduler policy
TIM tSchedulerPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4	TimeStamp	read-only	timestamp of last change to this row in tSchedulerPolicyTable.
T/F tSchedulerPolicyFrameBasedAccnt	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5	TruthValue	read-create	The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.
tVirtualSchedulerTable	1.3.6.1.4.1.6527.3.1.2.16.12.2		not-accessible
tVirtualSchedulerEntry	1.3.6.1.4.1.6527.3.1.2.16.12.2.1		not-accessible	Information about a particular Scheduler belonging to a Scheduler Policy.
INT tVirtualSchedulerTier	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1	INTEGER	not-accessible	Tier to which this scheduler belongs to.
TNA tVirtualSchedulerName	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2	TNamedItem	not-accessible	Name of the scheduler policy.
ROW tVirtualSchedulerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3	RowStatus	read-create	Row Status of the entry.
TIT tVirtualSchedulerDescription	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4	TItemDescription	read-create	Description for the scheduler policy
TNA tVirtualSchedulerParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5	TNamedItemOrEmpty	read-create	The scheduler to which this scheduler would be feeding.
TLE tVirtualSchedulerLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6	TLevel	read-create	This specifies the level of priority while feeding the parent.
TWE tVirtualSchedulerWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding.
TLE tVirtualSchedulerCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8	TLevelOrDefault	read-create	This specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TWE tVirtualSchedulerCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
THP tVirtualSchedulerPIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10	THPolVirtualSchePIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
THP tVirtualSchedulerCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11	THPolVirtualScheCIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
T/F tVirtualSchedulerSummedCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12	TruthValue	read-create	tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning.
TIM tVirtualSchedulerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13	TimeStamp	read-only	The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable.
T/F tVirtualSchedulerUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14	TruthValue	read-create	The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed.
TLE tVirtualSchedulerPortLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15	TLevel	read-create	The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tVirtualSchedulerPortWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16	TWeight	read-create	The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tVirtualSchedulerPortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17	TLevelOrDefault	read-create	The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tVirtualSchedulerPortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18	TWeight	read-create	The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
tPortSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.3		not-accessible	The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
tPortSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.3.1		not-accessible	Each row represents a particular port scheduler. Entries are created and deleted by the user.
TNA tPortSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1	TNamedItem	not-accessible	The value of tPortSchedulerPlcyName specifies the name of the port scheduler.
ROW tPortSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2	RowStatus	read-create	The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies.
TIT tPortSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3	TItemDescription	read-create	The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler.
TIM tPortSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4	TimeStamp	read-only	The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TPO tPortSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler.
TPO tPortSchedulerPlcyLvl1PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1.
TPO tPortSchedulerPlcyLvl1CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1.
TPO tPortSchedulerPlcyLvl2PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2.
TPO tPortSchedulerPlcyLvl2CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2.
TPO tPortSchedulerPlcyLvl3PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3.
TPO tPortSchedulerPlcyLvl3CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3.
TPO tPortSchedulerPlcyLvl4PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4.
TPO tPortSchedulerPlcyLvl4CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4.
TPO tPortSchedulerPlcyLvl5PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5.
TPO tPortSchedulerPlcyLvl5CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5.
TPO tPortSchedulerPlcyLvl6PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6.
TPO tPortSchedulerPlcyLvl6CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6.
TPO tPortSchedulerPlcyLvl7PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7.
TPO tPortSchedulerPlcyLvl7CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7.
TPO tPortSchedulerPlcyLvl8PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8.
TPO tPortSchedulerPlcyLvl8CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8.
TLE tPortSchedulerPlcyOrphanLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22	TLevel	read-create	The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir.
TWE tPortSchedulerPlcyOrphanWeight	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23	TWeight	read-create	The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir.
TLE tPortSchedulerPlcyOrphanCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24	TLevelOrDefault	read-create	The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir.
TWE tPortSchedulerPlcyOrphanCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25	TWeight	read-create	The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir.
tHsmdaSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.4		not-accessible	The tHsmdaSchedulerPlcyTable has an entry for each HSMDA scheduler policy configured on this system.
tHsmdaSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.4.1		not-accessible	Each row represents a particular HSMDA scheduler policy. Entries are created and deleted by the user.
TNA tHsmdaSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.1	TNamedItem	not-accessible	The value of tHsmdaSchedulerPlcyName specifies the name of the HSMDA scheduler policy.
ROW tHsmdaSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.2	RowStatus	read-create	The value of tHsmdaSchedulerPlcyRowStatus is used for the creation and deletion of HSMDA scheduler policies.
TIT tHsmdaSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.3	TItemDescription	read-create	The value of tHsmdaSchedulerPlcyDescription specifies the description of this HSMDA scheduling policy.
THS tHsmdaSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.4	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit, in megabits per second, of this HSMDA scheduler policy.
THS tHsmdaSchedulerPlcyLvl1Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.5	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1GrpId. Setting tHsmdaSchedulerPlcyLvl1Rate to any value (including default) while tHsmdaSchedulerPlcyLvl1GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl1GrpId being set to default, and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl1GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.6	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl1GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1Rate. Setting tHsmdaSchedulerPlcyLvl1GrpId to non-default value while tHsmdaSchedulerPlcyLvl1Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl1Rate being set to default. Setting tHsmdaSchedulerPlcyLvl1GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl1WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.7	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl1WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl1GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl1GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl2Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.8	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2GrpId. Setting tHsmdaSchedulerPlcyLvl2Rate to any value (including default) while tHsmdaSchedulerPlcyLvl2GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl2GrpId being set to default, and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl2GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.9	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl2GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2Rate. Setting tHsmdaSchedulerPlcyLvl2GrpId to non-default value while tHsmdaSchedulerPlcyLvl2Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl2Rate being set to default. Setting tHsmdaSchedulerPlcyLvl2GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl2WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.10	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl2WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl2GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl2GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl3Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.11	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl3Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3GrpId. Setting tHsmdaSchedulerPlcyLvl3Rate to any value (including default) while tHsmdaSchedulerPlcyLvl3GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl3GrpId being set to default, and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl3GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.12	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl3GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3Rate. Setting tHsmdaSchedulerPlcyLvl3GrpId to non-default value while tHsmdaSchedulerPlcyLvl3Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl3Rate being set to default. Setting tHsmdaSchedulerPlcyLvl3GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl3WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.13	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl3WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl3GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl3GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl4Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.14	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl4Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4GrpId. Setting tHsmdaSchedulerPlcyLvl4Rate to any value (including default) while tHsmdaSchedulerPlcyLvl4GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl4GrpId being set to default, and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl4GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.15	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl4GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4Rate. Setting tHsmdaSchedulerPlcyLvl4GrpId to non-default value while tHsmdaSchedulerPlcyLvl4Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl4Rate being set to default. Setting tHsmdaSchedulerPlcyLvl4GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl4WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.16	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl4WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl4GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl4GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl5Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.17	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl5Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5GrpId. Setting tHsmdaSchedulerPlcyLvl5Rate to any value (including default) while tHsmdaSchedulerPlcyLvl5GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl5GrpId being set to default, and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl5GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.18	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl5GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5Rate. Setting tHsmdaSchedulerPlcyLvl5GrpId to non-default value while tHsmdaSchedulerPlcyLvl5Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl5Rate being set to default. Setting tHsmdaSchedulerPlcyLvl5GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl5WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.19	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl5WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl5GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl5GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl6Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.20	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl6Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6GrpId. Setting tHsmdaSchedulerPlcyLvl6Rate to any value (including default) while tHsmdaSchedulerPlcyLvl6GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl6GrpId being set to default, and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl6GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.21	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl6GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6Rate. Setting tHsmdaSchedulerPlcyLvl6GrpId to non-default value while tHsmdaSchedulerPlcyLvl6Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl6Rate being set to default. Setting tHsmdaSchedulerPlcyLvl6GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl6WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.22	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl6WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl6GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl6GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl7Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.23	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl7Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7GrpId. Setting tHsmdaSchedulerPlcyLvl7Rate to any value (including default) while tHsmdaSchedulerPlcyLvl7GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl7GrpId being set to default, and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl7GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.24	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl7GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7Rate. Setting tHsmdaSchedulerPlcyLvl7GrpId to non-default value while tHsmdaSchedulerPlcyLvl7Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl7Rate being set to default. Setting tHsmdaSchedulerPlcyLvl7GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl7WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.25	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl7WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl7GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl7GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl8Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.26	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl8Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8GrpId. Setting tHsmdaSchedulerPlcyLvl8Rate to any value (including default) while tHsmdaSchedulerPlcyLvl8GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl8GrpId being set to default, and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl8GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.27	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl8GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8Rate. Setting tHsmdaSchedulerPlcyLvl8GrpId to non-default value while tHsmdaSchedulerPlcyLvl8Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl8Rate being set to default. Setting tHsmdaSchedulerPlcyLvl8GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl8WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.28	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl8WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl8GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl8GrpId is non-default.
TIM tHsmdaSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.29	TimeStamp	read-only	The value of tHsmdaSchedulerPlcyLastChanged indicates the timestamp of last change to this row in tHsmdaSchedulerPlcyTable.
THS tHsmdaSchedulerPlcyGrp1Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.30	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyGrp1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 1 for this HSMDA scheduler policy group.
THS tHsmdaSchedulerPlcyGrp2Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.31	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyGrp2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 2 for this HSMDA scheduler policy group.
TCL tHsmdaSchedulerPlcyBrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.32	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyBrstLimit specifies the explicit shaping burst size for this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyGrp1BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.33	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyGrp1BrstLimit specifies the explicit shaping burst size for group 1 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyGrp2BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.34	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyGrp2BrstLimit specifies the explicit shaping burst size for group 2 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl1BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.35	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl1BrstLimit specifies the explicit shaping burst size for level 1 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl2BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.36	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl2BrstLimit specifies the explicit shaping burst size for level 2 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl3BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.37	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl3BrstLimit specifies the explicit shaping burst size for level 3 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl4BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.38	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl4BrstLimit specifies the explicit shaping burst size for level 4 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl5BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.39	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl5BrstLimit specifies the explicit shaping burst size for level 5 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl6BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.40	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl6BrstLimit specifies the explicit shaping burst size for level 6 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl7BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.41	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl7BrstLimit specifies the explicit shaping burst size for level 7 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl8BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.42	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl8BrstLimit specifies the explicit shaping burst size for level 8 of this HSMDA scheduler policy.
tPortSchPlcyGrpTable	1.3.6.1.4.1.6527.3.1.2.16.12.5		not-accessible	The tPortSchPlcyGrpTable has an entry for each port scheduler group configured on this system.
tPortSchPlcyGrpEntry	1.3.6.1.4.1.6527.3.1.2.16.12.5.1		not-accessible	Each row represents a particular port scheduler group. Entries are created and deleted by the user.
TNA tPortSchPlcyGrpName	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.1	TNamedItem	not-accessible	The value of tPortSchPlcyGrpName specifies the name of the port scheduler group.
ROW tPortSchPlcyGrpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.2	RowStatus	read-create	The value of tPortSchPlcyGrpRowStatus is used for the creation and deletion of port scheduler policies.
TIM tPortSchPlcyGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.3	TimeStamp	read-only	The value of tPortSchPlcyGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TPO tPortSchPlcyGrpAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.4	TPortSchedulerPIRRate	read-create	The value of tPortSchPlcyGrpAdminPIR specifies the total bandwidth limit, Admin PIR of this port scheduler group.
TPO tPortSchPlcyGrpAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.5	TPortSchedulerCIR	read-create	The value of tPortSchPlcyGrpAdminCIR specifies the within-cir bandwidth limit of this port scheduler group.
tPortSchPlcyLvlGrpTable	1.3.6.1.4.1.6527.3.1.2.16.12.6		not-accessible	The tPortSchPlcyLvlGrpTable has an entry for each port scheduler configured on this system for priority level group objects.
tPortSchPlcyLvlGrpEntry	1.3.6.1.4.1.6527.3.1.2.16.12.6.1		not-accessible	Each row represents a particular port scheduler specific priority level group information.
TIM tPortSchPlcyLvlGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.1	TimeStamp	read-only	The value of tPortSchPlcyLvlGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TNA tPortSchPlcyLvl1GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.2	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl1GrpName specifies the group associated with this scheduler policy for priority level set to '1'.
TNA tPortSchPlcyLvl2GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.3	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl2GrpName specifies the group associated with this scheduler policy for priority level set to '2'.
TNA tPortSchPlcyLvl3GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.4	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl3GrpName specifies the group associated with this scheduler policy for priority level set to '3'.
TNA tPortSchPlcyLvl4GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.5	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl4GrpName specifies the group associated with this scheduler policy for priority level set to '4'.
TNA tPortSchPlcyLvl5GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.6	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl5GrpName specifies the group associated with this scheduler policy for priority level set to '5'.
TNA tPortSchPlcyLvl6GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.7	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl6GrpName specifies the group associated with this scheduler policy for priority level set to '6'.
TNA tPortSchPlcyLvl7GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.8	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl7GrpName specifies the group associated with this scheduler policy for priority level set to '7'.
TNA tPortSchPlcyLvl8GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.9	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl8GrpName specifies the group associated with this scheduler policy for priority level set to '8'.
TNO tPortSchPlcyLvl1GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.10	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl1GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl1GrpName is set to a default value.
TNO tPortSchPlcyLvl2GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.11	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl2GrpWeight specifies the weight associated with the group tPortSchPlcyLvl2GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl2GrpName is set to a default value.
TNO tPortSchPlcyLvl3GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.12	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl3GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl3GrpName is set to a default value.
TNO tPortSchPlcyLvl4GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.13	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl4GrpWeight specifies the weight associated with the group tPortSchPlcyLvl4GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl4GrpName is set to a default value.
TNO tPortSchPlcyLvl5GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.14	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl5GrpWeight specifies the weight associated with the group tPortSchPlcyLvl5GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl5GrpName is set to a default value.
TNO tPortSchPlcyLvl6GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.15	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl6GrpWeight specifies the weight associated with the group tPortSchPlcyLvl6GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl6GrpName is set to a default value.
TNO tPortSchPlcyLvl7GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.16	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl7GrpWeight specifies the weight associated with the group tPortSchPlcyLvl7GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl7GrpName is set to a default value.
TNO tPortSchPlcyLvl8GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.17	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl8GrpWeight specifies the weight associated with the group tPortSchPlcyLvl8GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl8GrpName is set to a default value.
tQosTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.16.20
TIM tQosDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.1	TimeStamp	read-only	The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain.
TIM tDSCPNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.5	TimeStamp	read-only	The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table.
TIM tQosIngQGroupTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.6	TimeStamp	read-only	tQosIngQGroupTableLastChanged indicates the timestamp of last change to the tQosIngQGroupTable.
TIM tQosIngQTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.7	TimeStamp	read-only	tQosIngQTableLastChanged indicates the timestamp of last change to the tQosIngQueueTable.
TIM tQosEgrQGroupTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.8	TimeStamp	read-only	tQosEgrQGroupTableLastChanged indicates the timestamp of last change to the tQosEgrQGroupTable.
TIM tQosEgrQTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.9	TimeStamp	read-only	tQosEgrQTableLastChanged indicates the timestamp of last change to the tQosEgrQueueTable.
TIM tFCNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.10	TimeStamp	read-only	The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table.
TIM tSapIngressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.20	TimeStamp	read-only	The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table.
TIM tSapIngressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.21	TimeStamp	read-only	tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table.
TIM tSapIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.22	TimeStamp	read-only	tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table.
TIM tSapIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.23	TimeStamp	read-only	tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table.
TIM tSapIngressIPCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.24	TimeStamp	read-only	tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table.
TIM tSapIngressMacCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.25	TimeStamp	read-only	tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table.
TIM tSapIngressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.26	TimeStamp	read-only	tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table.
TIM tSapIngressPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.27	TimeStamp	read-only	tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table.
TIM tSapEgressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.30	TimeStamp	read-only	tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table.
TIM tSapEgressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.31	TimeStamp	read-only	tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table.
TIM tSapEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.32	TimeStamp	read-only	tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table.
TIM tNetworkPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.40	TimeStamp	read-only	tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table.
TIM tNetworkIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.41	TimeStamp	read-only	tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table.
TIM tNetworkIngressLSPEXPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.42	TimeStamp	read-only	tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table.
TIM tNetworkEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.43	TimeStamp	read-only	tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table.
TIM tNetworkIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.44	TimeStamp	read-only	tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table.
TIM tNetworkQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.50	TimeStamp	read-only	tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table.
TIM tNetworkQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.51	TimeStamp	read-only	tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table.
TIM tNetworkQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.52	TimeStamp	read-only	tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table.
TIM tSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.55	TimeStamp	read-only	tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table.
TIM tSchedulerPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.60	TimeStamp	read-only	tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table.
TIM tVirtualSchedulerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.61	TimeStamp	read-only	tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table.
TIM tAtmTdpTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.62	TimeStamp	read-only	tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table.
TIM tSharedQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.63	TimeStamp	read-only	tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table.
TIM tSharedQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.64	TimeStamp	read-only	tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table.
TIM tSharedQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.65	TimeStamp	read-only	tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table.
TIM tSapIngressIPv6CriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.66	TimeStamp	read-only	The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table.
TIM tSapIngrHsmdaQueueTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.67	TimeStamp	read-only	tSapIngrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Ingress HSMDA Queue Table. This object is obsoleted in 10.0 Release.
TIM tSapEgrHsmdaQueueTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.68	TimeStamp	read-only	tSapEgrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Egress HSMDA Queue Table.
TIM tHsmdaSchedPlcyTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.69	TimeStamp	read-only	tHsmdaSchedPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Table.
TIM tHsmdaSchedPlcyGrpTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.70	TimeStamp	read-only	tHsmdaSchedPlcyGrpTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Group Table.
TIM tHsmdaPoolPlcyTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.71	TimeStamp	read-only	tHsmdaPoolPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Pool Policy Table.
TIM tHsmdaSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.72	TimeStamp	read-only	tHsmdaSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Hsmda Slope Policy Table.
TIM tNamedPoolPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.73	TimeStamp	read-only	The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQ1NamedPoolTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.74	TimeStamp	read-only	The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppIngrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.75	TimeStamp	read-only	The value of tMcMlpppIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppIngrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.76	TimeStamp	read-only	The value of tMcMlpppIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppEgrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.77	TimeStamp	read-only	The value of tMcMlpppEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppEgrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.78	TimeStamp	read-only	The value of tMcMlpppEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppEgrFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.79	TimeStamp	read-only	The value of tMcMlpppEgrFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrIngrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.80	TimeStamp	read-only	The value of tMcFrIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrIngrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.81	TimeStamp	read-only	The value of tMcFrIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrEgrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.82	TimeStamp	read-only	The value of tMcFrEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrEgrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.83	TimeStamp	read-only	The value of tMcFrEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapIngressLspExpTableLastChange	1.3.6.1.4.1.6527.3.1.2.16.20.84	TimeStamp	read-only	The value of tSapIngressLspExpTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tSapIngressLspExpTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapIngPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.85	TimeStamp	read-only	tSapIngPolicerTableLastChanged indicates the timestamp of last change to the tSapIngPolicerTable.
TIM tSapEgrPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.86	TimeStamp	read-only	tSapEgrPolicerTableLastChanged indicates the timestamp of last change to the tSapEgrPolicerTable.
TIM tQosPolicerCtrlPolTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.87	TimeStamp	read-only	tQosPolicerCtrlPolTblLastChgd indicates the timestamp of last change to the tQosPolicerCtrlPolTable.
TIM tQosPolicerLevelTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.88	TimeStamp	read-only	tQosPolicerLevelTblLastChgd indicates the timestamp of last change to the tQosPolicerLevelTable.
TIM tQosPolicerArbiterTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.89	TimeStamp	read-only	tQosPolicerArbiterTblLastChgd indicates the timestamp of last change to the tQosPolicerArbiterTable.
TIM tQosEgrQGroupFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.90	TimeStamp	read-only	The value of tQosEgrQGroupFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQosEgrQGroupFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tPortSchPlcyGrpTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.91	TimeStamp	read-only	tPortSchPlcyGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyGrpTable.
TIM tPortSchPlcyLvlGrpTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.92	TimeStamp	read-only	tPortSchPlcyLvlGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyLvlGrpTable.
TIM tHsmdaWrrPolicyTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.93	TimeStamp	read-only	The value of tHsmdaWrrPolicyTblLastChgd indicates the timestamp of last change to the tHsmdaWrrPolicyTable.
TIM tNetworkEgrHsmdaQueueTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.94	TimeStamp	read-only	The value of tNetworkEgrHsmdaQueueTblLastChgd indicates the timestamp of last change to this row in tNetworkEgrHsmdaQueueTable.
TIM tSapIngPolicyNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.95	TimeStamp	read-only	The value of tSapIngPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapIngPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapEgrPolicyNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.96	TimeStamp	read-only	The value of tSapEgrPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapEgrPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQosIngPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.97	TimeStamp	read-only	tQosIngPolicerTableLastChanged indicates the timestamp of last change to the tQosIngPolicerTable.
TIM tQosEgrPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.98	TimeStamp	read-only	tQosEgrPolicerTableLastChanged indicates the timestamp of last change to the tQosEgrPolicerTable.
TIM tSapEgressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.99	TimeStamp	read-only	tSapEgressDot1pTableLastChanged indicates the timestamp of last change to the tSapEgressDot1pTable.
TIM tAdvCfgPolicyTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.100	TimeStamp	read-only	The value of tAdvCfgPolicyTblLastChgd indicates the timestamp of last change to the tAdvCfgPolicyTable.
TIM tNetworkIngressFCTableLstChanged	1.3.6.1.4.1.6527.3.1.2.16.20.101	TimeStamp	read-only	The value of tNetworkIngressFCTableLstChanged indicates the timestamp of last change to the tNetworkIngressFCTable.
TIM tNetworkEgrDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.102	TimeStamp	read-only	The value of tNetworkEgrDSCPTableLastChanged indicates the timestamp of last change to the tNetworkEgressDSCPTable.
TIM tNetworkEgrPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.103	TimeStamp	read-only	The value of tNetworkEgrPrecTableLastChanged indicates the timestamp of last change to the tNetworkEgressPrecTable.
tAtmTdpObjects	1.3.6.1.4.1.6527.3.1.2.16.21
tAtmTdpTable	1.3.6.1.4.1.6527.3.1.2.16.21.1		not-accessible	This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
tAtmTdpEntry	1.3.6.1.4.1.6527.3.1.2.16.21.1.1		not-accessible	This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero.
ATM tAtmTdpIndex	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1	AtmTrafficDescrParamIndex	not-accessible	This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext.
U32 tAtmTdpSir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2	Unsigned32	read-create	tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir.
U32 tAtmTdpPir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3	Unsigned32	read-create	tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0
U32 tAtmTdpMbs	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4	Unsigned32	read-create	tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32
U32 tAtmTdpMir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5	Unsigned32	read-create	tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir.
INT tAtmTdpShaping	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6	INTEGER	read-create	tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.
ATM tAtmTdpServCat	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7	AtmServiceCategory	read-create	tAtmTdpServCat determines the ATM service category.
TIT tAtmTdpDescription	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8	TItemDescription	read-create	The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor.
TIM tAtmTdpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9	TimeStamp	read-only	tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table.
ROW tAtmTdpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10	RowStatus	read-create	tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported
TAT tAtmTdpDescrType	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11	TAtmTdpDescrType	read-create	tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr
U32 tAtmTdpCdvt	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12	Unsigned32	read-create	tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250
INT tAtmTdpPolicing	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13	INTEGER	read-create	tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR
INT tAtmTdpCLPTagging	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14	INTEGER	read-create	tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one.
I32 tAtmTdpWeight	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.15	Integer32	read-create	The value of tAtmTdpWeight specifies the relative weight assigned to this ATM traffic descriptor with respect to ATM VP shaper scheduling. The value of tAtmTdpWeight is only relevant for MDA where the value of TIMETRA-CHASSIS-MIB::tmnxMDAAtmMode is equal to max16kVc, and is ignored otherwise. If the value of tAtmTdpWeight is not specified when the conceptual row is created, the weight is derived from the ATM service category: CBR 10 rt-VBR 7 nrt-VBR 5 UBR+ (nonzero MIR) 2 UBR (zero MIR) 1.
I32 tAtmTdpIndexNext	1.3.6.1.4.1.6527.3.1.2.16.21.2	Integer32	read-only	This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
I32 tAtmTdpsMaxSupported	1.3.6.1.4.1.6527.3.1.2.16.21.3	Integer32	read-only	This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system.
I32 tAtmTdpsCurrentlyConfigured	1.3.6.1.4.1.6527.3.1.2.16.21.4	Integer32	read-only	This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system.
tPoolObjects	1.3.6.1.4.1.6527.3.1.2.16.22
tNamedPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.1		not-accessible	This table contains information on Named buffer pools policy.
tNamedPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.1.1		not-accessible	This list contains Named buffer pools policy related information.
TNA tNamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1	TNamedItem	not-accessible	The value of tNamedPoolPolicyName indicates the name of Named pool policy.
ROW tNamedPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2	RowStatus	read-create	The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies.
TIM tNamedPoolPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3	TimeStamp	read-only	The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified.
TIT tNamedPoolPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4	TItemDescription	read-create	The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy.
U32 tNamedPoolPolicyQ1DefaultWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5	Unsigned32	read-create	The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools.
U32 tNamedPoolPolicyQ1MdaWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6	Unsigned32	read-create	The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools.
U32 tNamedPoolPolicyQ1PortWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7	Unsigned32	read-create	The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools.
tQ1NamedPoolTable	1.3.6.1.4.1.6527.3.1.2.16.22.2		not-accessible	This table contains information on Q1 pools policy.
tQ1NamedPoolEntry	1.3.6.1.4.1.6527.3.1.2.16.22.2.1		not-accessible	This list contains Q1 pools policy related information.
TNA tQ1NamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1	TNamedItem	not-accessible	The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy.
TNA tQ1NamedPoolName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2	TNamedItem	not-accessible	The value of tQ1NamedPoolName indicates the name of the existing pool within the policy.
ROW tQ1NamedPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3	RowStatus	read-create	The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools.
TIM tQ1NamedPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4	TimeStamp	read-only	The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified.
TIT tQ1NamedPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5	TItemDescription	read-create	The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool.
U32 tQ1NamedPoolNetworkAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6	Unsigned32	read-create	The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools.
U32 tQ1NamedPoolAccessAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7	Unsigned32	read-create	The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools.
TNA tQ1NamedPoolSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8	TNamedItemOrEmpty	read-create	The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool.
I32 tQ1NamedPoolReservedCbs	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9	Integer32	read-create	The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
I32 tQ1NamedPoolResvCbsAmbrAlrmStep	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.10	Integer32	read-create	The value of tQ1NamedPoolResvCbsAmbrAlrmStep specifies the percentage step-size for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmStep is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmStep MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmMax. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
I32 tQ1NamedPoolResvCbsAmbrAlrmMax	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.11	Integer32	read-create	The value of tQ1NamedPoolResvCbsAmbrAlrmMax specifies the maximum percentage for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmMax is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmMax MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmStep. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared. Max reserved CBS must not be more than the reserved CBS.
I32 tQ1NamedPoolAmbrAlrmThresh	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.12	Integer32	read-create	The value of tQ1NamedPoolAmbrAlrmThresh specifies the threshold for the amber alarm on the over-subscription allowed.
I32 tQ1NamedPoolRedAlrmThresh	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.13	Integer32	read-create	The value of tQ1NamedPoolRedAlrmThresh specifies the threshold for the red alarm on the over-subscription allowed.
tHsmdaPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.3		not-accessible	The tHsmdaPoolPolicyTable has an entry for each HSMDA pool policy configured on this system.
tHsmdaPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.3.1		not-accessible	Each row represents a particular HSMDA pool policy. Entries are created and deleted by the user.
TNA tHsmdaPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.1	TNamedItem	not-accessible	The value of tHsmdaPoolPolicyName specifies the name of the HSMDA pool policy.
ROW tHsmdaPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.2	RowStatus	read-create	The value of tHsmdaPoolPolicyRowStatus is used for the creation and deletion of HSMDA pool policies.
TIM tHsmdaPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.3	TimeStamp	read-only	The value of tHsmdaPoolLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tHsmdaPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.4	TItemDescription	read-create	The value of tHsmdaPoolDescription specifies the description of this HSMDA pool policy.
U32 tHsmdaPoolSystemReserve	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.5	Unsigned32	read-create	The value of tHsmdaPoolSystemReserve specifies the percentage of HSMDA buffers that will be reserved for internal system use. When this value is set, all the provisioned buffer pool allocation sizes will be re-evaluated. This includes the port class allocations specified by indirectly by tmnxPortIngPoolPercentRate and tmnxPortEgrPoolPercentRate, and class and root pools specified indirectly by tHsmdaPoolClass1AllocPercent through tHsmdaPoolClass8AllocPercent and tHsmdaPoolRoot1AllocWeight through tHsmdaPoolRoot8AllocWeight.
TWE tHsmdaPoolRoot1AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.6	TWeight	read-create	The value of tHsmdaPoolRoot1AllocWeight specifies the weight that will be applied to the first root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot2AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.7	TWeight	read-create	The value of tHsmdaPoolRoot2AllocWeight specifies the weight that will be applied to the second root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot3AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.8	TWeight	read-create	The value of tHsmdaPoolRoot3AllocWeight specifies the weight that will be applied to the third root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot4AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.9	TWeight	read-create	The value of tHsmdaPoolRoot4AllocWeight specifies the weight that will be applied to the fourth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot5AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.10	TWeight	read-create	The value of tHsmdaPoolRoot5AllocWeight specifies the weight that will be applied to the fifth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot6AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.11	TWeight	read-create	The value of tHsmdaPoolRoot6AllocWeight specifies the weight that will be applied to the sixth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot7AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.12	TWeight	read-create	The value of tHsmdaPoolRoot7AllocWeight specifies the weight that will be applied to the seventh root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot8AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.13	TWeight	read-create	The value of tHsmdaPoolRoot8AllocWeight specifies the weight that will be applied to the eighth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
U32 tHsmdaPoolClass1Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.14	Unsigned32	read-create	The value of tHsmdaPoolClass1Parent specifies the root pool to which the first class pool will be associated.
U32 tHsmdaPoolClass1AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.15	Unsigned32	read-create	The value of tHsmdaPoolClass1AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass1Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass2Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.16	Unsigned32	read-create	The value of tHsmdaPoolClass2Parent specifies the root pool to which the second class pool will be associated.
U32 tHsmdaPoolClass2AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.17	Unsigned32	read-create	The value of tHsmdaPoolClass2AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass2Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass3Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.18	Unsigned32	read-create	The value of tHsmdaPoolClass3Parent specifies the root pool to which the third class pool will be associated.
U32 tHsmdaPoolClass3AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.19	Unsigned32	read-create	The value of tHsmdaPoolClass3AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass3Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass4Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.20	Unsigned32	read-create	The value of tHsmdaPoolClass4Parent specifies the root pool to which the fourth class pool will be associated.
U32 tHsmdaPoolClass4AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.21	Unsigned32	read-create	The value of tHsmdaPoolClass4AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass4Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass5Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.22	Unsigned32	read-create	The value of tHsmdaPoolClass5Parent specifies the root pool to which the fifth class pool will be associated.
U32 tHsmdaPoolClass5AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.23	Unsigned32	read-create	The value of tHsmdaPoolClass5AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass5Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass6Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.24	Unsigned32	read-create	The value of tHsmdaPoolClass6Parent specifies the root pool to which the sixth class pool will be associated.
U32 tHsmdaPoolClass6AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.25	Unsigned32	read-create	The value of tHsmdaPoolClass6AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass6Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass7Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.26	Unsigned32	read-create	The value of tHsmdaPoolClass7Parent specifies the root pool to which the seventh class pool will be associated.
U32 tHsmdaPoolClass7AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.27	Unsigned32	read-create	The value of tHsmdaPoolClass7AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass7Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass8Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.28	Unsigned32	read-create	The value of tHsmdaPoolClass8Parent specifies the root pool to which the eigth class pool will be associated.
U32 tHsmdaPoolClass8AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.29	Unsigned32	read-create	The value of tHsmdaPoolClass8AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass8Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
tMcMlpppIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.23
tMcMlpppIngrProfTable	1.3.6.1.4.1.6527.3.1.2.16.23.1		not-accessible	The tMcMlpppIngrProfTable has an entry for each ingress multi-class mlppp profile configured in the system.
tMcMlpppIngrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.23.1.1		not-accessible	Each row entry contains information about a particular ingress multi-class mlppp profile. Multi-class mlppp ingress profile 1 is created by the agent. It cannot be deleted. Other entries are created by the user.
TML tMcMlpppIngrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.1	TMlpppQoSProfileId	not-accessible	The value of tMcMlpppIngrProfIndex specifies a specific multi-class ingress profile.
TIT tMcMlpppIngrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.2	TItemDescription	read-create	The value of tMcMlpppIngrProfDescription holds the description for this profile.
TIM tMcMlpppIngrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.3	TimeStamp	read-only	The value of tMcMlpppIngrProfTable indicates the sysUpTime for the last change to this row.
ROW tMcMlpppIngrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.4	RowStatus	read-create	The value of tMcMlpppIngrProfRowStatus controls the creation and deletion of rows in this table.
tMcMlpppIngrClassTable	1.3.6.1.4.1.6527.3.1.2.16.23.2		not-accessible	The tMcMlpppIngrClassTable has an entry for each multi-class mlppp ingress class per multi-class mlppp ingress profile in the system.
tMcMlpppIngrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.23.2.1		not-accessible	Each entry contains information about a particular mlppp ingress multi-class class per mlppp ingress profile. Entries are created/destroyed as each tMcMlpppIngrProfEntry is created/destroyed.
TMN tMcMlpppIngrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.1	TmnxMcMlpppClassIndex	not-accessible	The value of tMcMlpppIngrClassIndex specifies a specific mlppp ingress class per multi-class mlppp ingress profile.
U32 tMcMlpppIngrClassReassemblyTmout	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.2	Unsigned32	read-write	The value of tMcMlpppIngrClassReassemblyTmout specifies the reassembly timeout for a specific mlppp multi-class ingress class. The default reassembly timeout value is determined by the tMcMlpppIngrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppIngrClassIndex Default Reassembly Value 0 10 1 10 2 100 3 1000
TIM tMcMlpppIngrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.3	TimeStamp	read-only	The value of tMcMlpppIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
tMcMlpppEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.24
tMcMlpppEgrProfTable	1.3.6.1.4.1.6527.3.1.2.16.24.1		not-accessible	The tMcMlpppEgrProfTable has an entry for each egress multi-class mlppp profile configured in the system.
tMcMlpppEgrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.24.1.1		not-accessible	Each row entry contains information about a particular egress multi-class mlppp profile. Multi-class mlppp egress profiles 1,2 and 3 are created by the agent. They cannot be deleted. Other entries are created by the user.
TML tMcMlpppEgrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.1	TMlpppQoSProfileId	not-accessible	The value of tMcMlpppEgrProfIndex specifies a specific multi-class egress profile.
TIT tMcMlpppEgrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.2	TItemDescription	read-create	The value of tMcMlpppEgrProfDescription holds the description for this profile.
TIM tMcMlpppEgrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.3	TimeStamp	read-only	The value of tMcMlpppEgrProfLastChanged indicates the sysUpTime for the last change to this row.
ROW tMcMlpppEgrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.4	RowStatus	read-create	The value of tMcMlpppEgrProfRowStatus controls the creation and deletion of rows in this table.
tMcMlpppEgrClassTable	1.3.6.1.4.1.6527.3.1.2.16.24.3		not-accessible	The tMcMlpppEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
tMcMlpppEgrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.24.3.1		not-accessible	Each entry contains information about a particular mlppp egress multi-class class per mlppp multi-class mlppp egress profile. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
TMN tMcMlpppEgrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.1	TmnxMcMlpppClassIndex	not-accessible	The value of tMcMlpppEgrClassIndex specifies a specific mlppp egress class per multi-class mlppp egress profile.
U32 tMcMlpppEgrClassMir	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.2	Unsigned32	read-write	The value of tMcMlpppEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. The default Mir is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Mir Value 0 100 1 85 2 0 3 0
U32 tMcMlpppEgrClassWeight	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.3	Unsigned32	read-write	The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. The default Weight is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Weight Value 0 0 1 0 2 66 3 33
U32 tMcMlpppEgrClassMaxSize	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.4	Unsigned32	read-write	The value of tMcMlpppEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Max Size 0 25 1 5 2 200 3 1000
TIM tMcMlpppEgrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.5	TimeStamp	read-only	The value of tMcMlpppEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
tMcMlpppEgrFCTable	1.3.6.1.4.1.6527.3.1.2.16.24.4		not-accessible	The tMcMlpppEgrFCTable has an entry for all egress FC Mappings to multi-class mlppp classes.
tMcMlpppEgrFCEntry	1.3.6.1.4.1.6527.3.1.2.16.24.4.1		not-accessible	Each entry contains information about all egress FC Mappings to multi-class mlppp classes. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
TFC tMcMlpppEgrFCName	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.1	TFCName	not-accessible	The value tMcMlpppEgrFCName specifies of the name of the forwarding class.
U32 tMcMlpppEgrFCClass	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.2	Unsigned32	read-write	The value of tMcMlpppEgrFCClass specifies the mlppp multi-class class for the per-forwarding-class specified. The default class value is determined by the Forwarding Class Name. Forwarding Class Name Mlppp Class Value be 3 l2 2 af 2 l1 2 h2 2 ef 1 h1 0 nc 0
TIM tMcMlpppEgrFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.3	TimeStamp	read-only	The value of tMcMlpppEgrFCLastChanged indicates the sysUpTime for the last change to this entry.
tMcFrIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.25
tMcFrIngrProfTable	1.3.6.1.4.1.6527.3.1.2.16.25.1		not-accessible	The tMcFrIngrProfTable has an entry for each ingress multi-class frame-relay profile configured in the system.
tMcFrIngrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.25.1.1		not-accessible	Each row entry contains information about a particular ingress multi-class frame-relay profile. Multi-class frame-relay ingress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
TMC tMcFrIngrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.1	TMcFrQoSProfileId	not-accessible	The value of tMcFrIngrProfIndex specifies a specific multi-class ingress profile.
TIT tMcFrIngrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.2	TItemDescription	read-create	The value of tMcFrIngrProfDescription holds the description for this profile.
TIM tMcFrIngrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.3	TimeStamp	read-only	The value of tMcFrIngrProfTable indicates the sysUpTime for the last change to this row.
ROW tMcFrIngrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.4	RowStatus	read-create	The value of tMcFrIngrProfRowStatus controls the creation and deletion of rows in this table.
tMcFrIngrClassTable	1.3.6.1.4.1.6527.3.1.2.16.25.2		not-accessible	The tMcFrIngrClassTable has an entry for each multi-class frame-relay ingress class per multi-class frame-relay ingress profile in the system.
tMcFrIngrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.25.2.1		not-accessible	Each entry contains information about a particular frame-relay ingress multi-class class per frame-relay ingress profile. Entries are created/destroyed as each tMcFrIngrProfEntry is created/destroyed.
TMN tMcFrIngrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.1	TmnxMcFrClassIndex	not-accessible	The value of tMcFrIngrClassIndex specifies a specific frame-relay ingress class per multi-class frame-relay ingress profile.
U32 tMcFrIngrClassReassemblyTmout	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.2	Unsigned32	read-write	The value of tMcFrIngrClassReassemblyTmout specifies the reassembly timeout for a specific frame-relay multi-class ingress class. Currently only four multi-class classes are supported per profile.
TIM tMcFrIngrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.3	TimeStamp	read-only	The value of tMcFrIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
tMcFrEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.26
tMcFrEgrProfTable	1.3.6.1.4.1.6527.3.1.2.16.26.1		not-accessible	The tMcFrEgrProfTable has an entry for each egress multi-class frame-relay profile configured in the system.
tMcFrEgrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.26.1.1		not-accessible	Each row entry contains information about a particular egress multi-class frame-relay profile. Multi-class frame-relay egress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
TMC tMcFrEgrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.1	TMcFrQoSProfileId	not-accessible	The value of tMcFrEgrProfIndex specifies a specific multi-class egress profile.
TIT tMcFrEgrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.2	TItemDescription	read-create	The value of tMcFrEgrProfDescription holds the description for this profile.
TIM tMcFrEgrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.3	TimeStamp	read-only	The value of tMcFrEgrProfLastChanged indicates the sysUpTime for the last change to this row.
ROW tMcFrEgrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.4	RowStatus	read-create	The value of tMcFrEgrProfRowStatus controls the creation and deletion of rows in this table.
tMcFrEgrClassTable	1.3.6.1.4.1.6527.3.1.2.16.26.3		not-accessible	The tMcFrEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
tMcFrEgrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.26.3.1		not-accessible	Each entry contains information about a particular frame-relay egress multi-class class per multi-class frame-relay egress profile. Entries are created/destroyed as each tMcFrEgrProfEntry is created/destroyed.
TMN tMcFrEgrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.1	TmnxMcFrClassIndex	not-accessible	The value of tMcFrEgrClassIndex specifies a specific frame-relay egress class per multi-class frame-relay egress profile.
U32 tMcFrEgrClassMir	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.2	Unsigned32	read-write	The value of tMcFrEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
U32 tMcFrEgrClassWeight	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.3	Unsigned32	read-write	The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
U32 tMcFrEgrClassMaxSize	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.4	Unsigned32	read-write	The value of tMcFrEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcFrEgrClassIndex value. Currently only four multi-class classes are supported per profile.
TIM tMcFrEgrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.5	TimeStamp	read-only	The value of tMcFrEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
tQosPolicerObjects	1.3.6.1.4.1.6527.3.1.2.16.27
tQosPolicerCtrlPolTable	1.3.6.1.4.1.6527.3.1.2.16.27.1		not-accessible	tQosPolicerCtrlPolTable defines all egress queues.
tQosPolicerCtrlPolEntry	1.3.6.1.4.1.6527.3.1.2.16.27.1.1		not-accessible	tQosPolicerCtrlPolEntry defines a particular egress queue. Entries are created and deleted by user.
TNA tQosPolicerCtrlPolName	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.1	TNamedItem	not-accessible	The value of tQosPolicerCtrlPolName identifies the name of the policer control policy.
ROW tQosPolicerCtrlPolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.2	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
TIM tQosPolicerCtrlPolLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.3	TimeStamp	read-only	The value of tQosPolicerCtrlPolLastChgd indicates the timestamp of last change to this row in tQosPolicerCtrlPolTable.
TIT tQosPolicerCtrlPolDescr	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.4	TItemDescription	read-create	The value of tQosPolicerCtrlPolDescr specifies the description for the policer control policy.
THP tQosPolicerCtrlPolRootMaxRate	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.5	THPolPIRRate	read-create	The value of tQosPolicerCtrlPolRootMaxRate specifies the maximum frame based bandwidth limit of this policer.
TPL tQosPolicerCtrlPolMinMBSSep	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.6	TPlcrBurstSizeBytes	read-create	The value of tQosPolicerCtrlPolMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer.
T/F tQosPolicerCtrlPolProfPref	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.7	TruthValue	read-create	The value of tQosPolicerCtrlPolProfPref specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer. When the value of this object is set to 'true', preferred profile is applied to this policy. When the value is set to 'false', no preffered profile is set to this policy.
tQosPolicerLevelTable	1.3.6.1.4.1.6527.3.1.2.16.27.2		not-accessible	tQosPolicerLevelTable defines all levels of QoS Policer control policy defined by tQosPolicerCtrlPolTable.
tQosPolicerLevelEntry	1.3.6.1.4.1.6527.3.1.2.16.27.2.1		not-accessible	tQosPolicerLevelEntry defines a specific level of QoS policer control policy defined by tQosPolicerCtrlPolTable. Entries are created and deleted by the system when QoS policer control policy is created and deleted.
TLE tQosPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.1	TLevel	not-accessible	The value of tQosPolicerLevel identifies the level of the policer control policy defined by tQosPolicerCtrlPolName.
TIM tQosPolicerLevelLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.2	TimeStamp	read-only	The value of tQosPolicerLevelLastChgd indicates the timestamp of last change to this row in tQosPolicerLevelTable.
TPL tQosPolicerLevelCumMBS	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.3	TPlcrBurstSizeBytes	read-create	The value of tQosPolicerLevelCumMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by this policer.
T/F tQosPolicerLevelFixedMBS	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.4	TruthValue	read-create	The value of tQosPolicerLevelFixedMBS specifies whether the cumulative buffer space is fixed for this level. When the value of this object is set to 'true', cumulative buffer space for this level is fixed. When the value is set to 'false', cumulative buffer space for this level is not fixed.
tQosPolicerArbiterTable	1.3.6.1.4.1.6527.3.1.2.16.27.3		not-accessible	tQosPolicerArbiterTable defines policy arbiters for all policer control policies.
tQosPolicerArbiterEntry	1.3.6.1.4.1.6527.3.1.2.16.27.3.1		not-accessible	tQosPolicerArbiterEntry defines a particular policy arbiter for a specific QoS policer control policy on a given tier. Entries are created and deleted by user.
INT tQosPolicerArbiterTier	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.1	INTEGER	not-accessible	The value of tQosPolicerArbiterTier identifies the tier of the policer control policy arbiter.
TNA tQosPolicerArbiterName	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.2	TNamedItem	not-accessible	The value of tQosPolicerArbiterName identifies the name of the policer control policy arbiter.
ROW tQosPolicerArbiterRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.3	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
TIM tQosPolicerArbiterLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.4	TimeStamp	read-only	The value of tQosPolicerArbiterLastChgd indicates the timestamp of last change to this row in tQosPolicerArbiterTable.
TIT tQosPolicerArbiterDescr	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.5	TItemDescription	read-create	The value of tQosPolicerArbiterDescr specifies the description for the policer control policy arbiter for the given tier.
THP tQosPolicerArbiterRate	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.6	THPolPIRRate	read-create	The value of tQosPolicerArbiterRate specifies the maximum frame based bandwidth limit of this policer control policy arbiter for the given tier.
TNA tQosPolicerArbiterParent	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.7	TNamedItemOrEmpty	read-create	tQosPolicerArbiterParent specifies the scheduler to which this queue would be feeding.
TLE tQosPolicerArbiterLevel	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.8	TLevel	read-create	tQosPolicerArbiterLevel specifies the level of priority while feeding the parent.
TPO tQosPolicerArbiterWeight	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.9	TPolicerWeight	read-create	tQosPolicerArbiterWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
tQosIngPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.27.4		not-accessible	tQosIngPolicerTable defines QOS Ingress Policer Table for providing, via SNMP, the capability of defining the policers in the ingress queue groups. tQosIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the Qos policies.
tQosIngPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.27.4.1		not-accessible	tQosIngPolicerEntry defines an entry in the tQosIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosIngPolicerRowStatus.
TIN tQosIngPolicerId	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.1	TIngPolicerId	not-accessible	tQosIngPolicerId defines the Ingress Queue Group Policer identifier. It identifies an ingress queue group policer in the managed system.
ROW tQosIngPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.2	RowStatus	read-create	tQosIngPolicerRowStatus allows entries to be created and deleted in the tQosIngPolicerTable.
TIM tQosIngPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.3	TimeStamp	read-only	tQosIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIT tQosIngPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.4	TItemDescription	read-create	tQosIngPolicerDescr specifies the description of the policer.
TAD tQosIngPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosIngPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TNA tQosIngPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.7	TNamedItemOrEmpty	read-create	tQosIngPolicerParent specifies the arbiter to which this policer would be feeding.
TLE tQosIngPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.8	TLevel	read-create	tQosIngPolicerLevel specifies the level of priority while feeding the parent.
TPO tQosIngPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.9	TPolicerWeight	read-create	tQosIngPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding
THP tQosIngPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10	THPolPIRRate	read-create	tQosIngPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tQosIngPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.11	THPolCIRRate	read-create	tQosIngPolicerAdminCIR specifies the administrative CIR specified by the user.
TPL tQosIngPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.12	TPlcrBurstSizeBytes	read-create	tQosIngPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
TPL tQosIngPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.13	TPlcrBurstSizeBytes	read-create	tQosIngPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
TBU tQosIngPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.14	TBurstPercentOrDefault	read-create	tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
TPE tQosIngPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.15	TPerPacketOffset	read-create	tQosIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
T/F tQosIngPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.16	TruthValue	read-create	The value of tQosIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tQosIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
TMN tQosIngPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.17	TmnxIngPolicerStatMode	read-create	tQosIngPolicerStatMode specifies the mode of statistics collected by this policer.
U32 tQosIngPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18	Unsigned32	read-create	The value of tQosIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tQosIngPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.19	Unsigned32	read-create	The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tQosIngPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.20	Unsigned32	read-create	The value of tQosIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosIngPolicerSlopeStartDepth up to the tQosIngPolicerSlopeMaxProb at the tQosIngPolicerSlopeMaxDepth.
TMN tQosIngPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.21	TmnxSlopeMap	read-create	The value of tQosIngPolicerSlopeMap specifies the slope map to be used with this policer.
TNA tQosIngPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.22	TNamedItemOrEmpty	read-create	The value of tQosIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
tQosEgrPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.27.5		not-accessible	tQosEgrPolicerTable defines QOS egress Policer Table for providing, via SNMP, the capability of defining the policers in the egress queue groups. tQosEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within Qos policies.
tQosEgrPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.27.5.1		not-accessible	tQosEgrPolicerEntry defines an entry in the tQosEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosEgrPolicerRowStatus.
TEG tQosEgrPolicerId	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1	TEgrPolicerId	not-accessible	tQosEgrPolicerId defines the Egress Queue Group Policer identifier. It identifies an egress queue group policer in the managed system.
ROW tQosEgrPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2	RowStatus	read-create	tQosEgrPolicerRowStatus allows entries to be created and deleted in the tQosEgrPolicerTable.
TIM tQosEgrPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3	TimeStamp	read-only	tQosEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIT tQosEgrPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4	TItemDescription	read-create	tQosEgrPolicerDescr specifies the description of the policer.
TAD tQosEgrPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosEgrPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TNA tQosEgrPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7	TNamedItemOrEmpty	read-create	tQosEgrPolicerParent specifies the arbiter to which this policer would be feeding
TLE tQosEgrPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8	TLevel	read-create	tQosEgrPolicerLevel specifies the level of priority while feeding the parent.
TPO tQosEgrPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9	TPolicerWeight	read-create	tQosEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
THP tQosEgrPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10	THPolPIRRate	read-create	tQosEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tQosEgrPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11	THPolCIRRate	read-create	tQosEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
TPL tQosEgrPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12	TPlcrBurstSizeBytes	read-create	tQosEgrPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
TPL tQosEgrPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13	TPlcrBurstSizeBytes	read-create	tQosEgrPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
TBU tQosEgrPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14	TBurstPercentOrDefault	read-create	tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
TPE tQosEgrPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15	TPerPacketOffset	read-create	tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
T/F tQosEgrPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16	TruthValue	read-create	The value of tQosEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tQosEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
TMN tQosEgrPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17	TmnxEgrPolicerStatMode	read-create	tQosEgrPolicerStatMode specifies the mode of statistics collected by this policer.
U32 tQosEgrPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18	Unsigned32	read-create	The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tQosEgrPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20	Unsigned32	read-create	The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tQosEgrPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21	Unsigned32	read-create	The value of tQosEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosEgrPolicerSlopeStartDepth up to the tQosEgrPolicerSlopeMaxProb at the tQosEgrPolicerSlopeMaxDepth.
TMN tQosEgrPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22	TmnxSlopeMap	read-create	The value of tQosEgrPolicerSlopeMap specifies the slope map to be used with this policer.
TNA tQosEgrPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23	TNamedItemOrEmpty	read-create	The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
tAdvCfgPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.27.6		not-accessible	The tAdvCfgPolicyTable has an entry for each configuration policy for queue and policer parameters configured on this system.
tAdvCfgPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.27.6.1		not-accessible	Each row represents a particular configuration policy. Entries are created and deleted by the user.
TNA tAdvCfgPolicyName	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.1	TNamedItem	not-accessible	The value of tAdvCfgPolicyName specifies the name of the advanced configuration policy.
ROW tAdvCfgPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.2	RowStatus	read-create	The value of tAdvCfgPolicyRowStatus is used for the creation and deletion of advanced configuration policies.
TIM tAdvCfgLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.3	TimeStamp	read-only	The value of tAdvCfgLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tAdvCfgDescription	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.4	TItemDescription	read-create	The value of tAdvCfgDescription specifies the description of this advanced configuration policy.
U32 tAdvCfgChildAdmnPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.5	Unsigned32	read-create	The value of tAdvCfgChildAdmnPirPrcnt specifies the percentage of the child's administrative PIR that should be added to the child's offered rate, capped by the child's PIR. When the value of tAdvCfgChildAdmnPirPrcnt is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
TAD tAdvCfgChildAdminRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.6	TAdvCfgRate	read-create	The value of tAdvCfgChildAdminRate specifies the explicit number of kilobits-per-second that should be added to the child's offered rate. When the value of tAdvCfgChildAdminRate is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
U32 tAdvCfgOMGranPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.7	Unsigned32	read-create	The value of tAdvCfgOMGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the threshold sensitivity to offered rate. When the value of tAdvCfgOMGranPirPrcnt is set to '0', it restores the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
TAD tAdvCfgOMGranRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.8	TAdvCfgRate	read-create	The value of tAdvCfgOMGranRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate change sensitivity value. When the value of tAdvCfgOMGranRate is set to '0', the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName are restored.
U32 tAdvCfgMaxDecPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.9	Unsigned32	read-create	The value of tAdvCfgMaxDecPirPrcnt specifies the percentage of the child's administrative PIR that should be used as the decrement limit to offered rate change. When the value of tAdvCfgMaxDecPirPrcnt is set to '10000', any currently configured maximum decrement limit for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
TMA tAdvCfgMaxDecRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.10	TMaxDecRate	read-create	The value of tAdvCfgMaxDecRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate decrement limit value.
U32 tAdvCfgHiRateHoldTime	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.11	Unsigned32	read-create	The value of tAdvCfgHiRateHoldTime specifies the time period that the current offered rate should be maintained for a child policer or queue. When tAdvCfgHiRateHoldTime is set to '0', any currently configured hold time for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
U32 tAdvCfgTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.12	Unsigned32	read-create	The value of tAdvCfgTimeAvgFactor is used the weight the new offered rate with a portion of the pervious offered rate. When tAdvCfgTimeAvgFactor is set to '0', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
U32 tAdvCfgSampleInterval	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.13	Unsigned32	read-create	The value of tAdvCfgSampleInterval specifies the interval for sampling the child's offered rate. A value of '1' of tAdvCfgSampleInterval represents fastest sampling rate available while a value of '8' represents slowest sampling period available. When tAdvCfgSampleInterval is set to '4', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
T/F tAdvCfgFastStart	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.14	TruthValue	read-create	The value of tAdvCfgFastStart specifies the whether fast detection of initial bandwidth on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStart is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
T/F tAdvCfgFastStop	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.15	TruthValue	read-create	The value of tAdvCfgFastStop specifies the whether fast detection of lack of offered rate on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStop is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
U32 tAdvCfgAbvOffCapPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.16	Unsigned32	read-create	The value of tAdvCfgAbvOffCapPirPrcnt specifies the percentage of the child's administrative PIR that should be fair share increase limit, capped by the child's PIR. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '10000', the fair share operational PIR rate increase limit from all child policers and queues associated with tAdvCfgPolicyName policy are removed.
I32 tAdvCfgAbvOffCapRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.17	Integer32	read-create	The value of tAdvCfgAbvOffCapRate specifies the explicit number of kilobits-per-second that should be used as the limit to the child's fair share increase to the operational PIR. When the value of tAdvCfgAbvOffCapRate is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapRate is set to '-1', it means maximum rate.
U32 tAdvCfgBWDGranPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.18	Unsigned32	read-create	The value of tAdvCfgBWDGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the rounding step value. When the value of tAdvCfgBWDGranPirPrcnt is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
TAD tAdvCfgBWDGranRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.19	TAdvCfgRate	read-create	The value of tAdvCfgBWDGranRate specifies the explicit number of kilobits-per-second that should be used as the child's rounding step value. When the value of tAdvCfgBWDGranRate is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
T/F tAdvCfgMinOnly	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.20	TruthValue	read-create	The value of tAdvCfgMinOnly specifies the system to interpret the increase in tAdvCfgChildAdminRate as a minimum offered rate. When the tAdvCfgFastStop is set to 'false', the system uses the specified increase in tAdvCfgChildAdmnPirPrcnt or tAdvCfgChildAdminRate as a minimum offered rate even for inactive queues or policers associated with tAdvCfgPolicyName.
T/F tAdvCfgDecOnly	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.21	TruthValue	read-create	The value of tAdvCfgDecOnly specifies the tAdvCfgTimeAvgFactor adjustment to be applied if the new offered rate is decreasing compared to the previous offered rate. If the new offered rate is greater than the previous offered rate, the adjustment is not applied. When the tAdvCfgDecOnly is set to 'false', it has no impact on tAdvCfgTimeAvgFactor adjustment.
tWrrObjects	1.3.6.1.4.1.6527.3.1.2.16.28
tHsmdaWrrPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.28.1		not-accessible	The tHsmdaWrrPolicyTable contains the information of the Weighted Round Robin (WRR) policies configured on HSDMA queues.
tHsmdaWrrPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.28.1.1		not-accessible	Each row in tHsmdaWrrPolicyEntry represents a HSMDA Weighted Round Robin (WRR) policy specified by tHsmdaWrrPolicyName.
TNA tHsmdaWrrPolicyName	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.1	TNamedItem	not-accessible	The value of tHsmdaWrrPolicyName specifies the name of the Weighted Round Robin (WRR) policy associated with this HSDMA queue.
ROW tHsmdaWrrPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.2	RowStatus	read-create	The value of tHsmdaWrrPolicyRowStatus is used for the creation and deletion of entries in the tHsmdaWrrPolicyTable.
TIM tHsmdaWrrPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.3	TimeStamp	read-only	The value of tHsmdaWrrPolicyLastChanged indicates the sysUpTime for the last change to this row.
TIT tHsmdaWrrPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.4	TItemDescription	read-create	The value of tHsmdaWrrPolicyDescription specifies the description of the Weighted Round Robin (WRR) policy on this HSMDA queue.
THS tHsmdaWrrPolicyIncludeQueues	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.5	THsmdaPolicyIncludeQueues	read-create	The value of tHsmdaWrrPolicyIncludeQueues specifies the queues that can be scheduled in the same class in a Weighted Round Robin (WRR) fashion within the HSMDA scheduler.
THS tHsmdaWrrPolicySchedUsingClass	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.6	THsmdaPolicyScheduleClass	read-create	The value of tHsmdaWrrPolicySchedUsingClass specifies which class to schedule the queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
THS tHsmdaWrrPolicyAggWeightAtClass	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.7	THsmdaWeightClass	read-create	The value of tHsmdaWrrPolicyAggWeightAtClass specifies the weight assigned to the group of queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
tQosNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.16
tQosNotifications	1.3.6.1.4.1.6527.3.1.3.16.0

AtmServiceCategory (1)
ATM tAtmTdpServCat	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.7	AtmServiceCategory	read-create	tAtmTdpServCat determines the ATM service category.
AtmTrafficDescrParamIndex (1)
ATM tAtmTdpIndex	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.1	AtmTrafficDescrParamIndex	not-accessible	This object is used to identify an entity inside the tAtmTdpTable. When creating a new row in the table the value of this index may be obtained by retrieving the value of tAtmTdpIndexNext.
AtmVcIdentifier (1)
OID tSapIngressMacCriteriaAtmVci	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.22	AtmVcIdentifier	read-create	The value of tSapIngressMacCriteriaAtmVci specifies ATM VC Identifier to match as part of the MAC criteria for this SAP on the ingress. An inconsistentValue error is returned if this object is set when tSapIngressMacCriteriaFrameType is not set to 'atm'.
Dot1PPriority (14)
DOT tNetworkEgressFCDot1pInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.6	Dot1PPriority	read-write	the Dot1p to use for in-profile traffic.
DOT tNetworkEgressFCDot1pOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.7	Dot1PPriority	read-write	the Dot1p to use for out-of-profile traffic.
DOT tNetworkIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.1	Dot1PPriority	not-accessible
DOT tSapEgressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.1	Dot1PPriority	not-accessible	The value of tSapEgressDot1pValue specifies the dotp value to match in the packet. This value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
DOT tSapEgressFCDot1PInProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.8	Dot1PPriority	read-create	The value of tSapEgressFCDot1PInProfile specifies 802.1p value to set for in-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1POutProfile object is set to '-1'.
DOT tSapEgressFCDot1POutProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.9	Dot1PPriority	read-create	The value of tSapEgressFCDot1POutProfile specifies 802.1p value to set for out-profile frames in this forwarding class. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDot1PInProfile object is set to '-1'.
DOT tSapEgressFCDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.4	Dot1PPriority	read-create	The value of tSapEgressFCDot1PValue specifies 802.1p value to use for packets in this forwarding class. This object has been replaced by tSapEgressFCDot1PInProfile and tSapEgressFCDot1POutProfile objects.
DOT tSapIngressDot1pValue	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.1	Dot1PPriority	not-accessible	dot1p value to match in the packet. this value is also used as an index so that for any dot1p value there is only one possible disposition queue and priority.
DOT tSapIngressIPCriteriaIpPrecMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.32	Dot1PPriority	read-create
DOT tSapIngressIPCriteriaIpPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.31	Dot1PPriority	read-create
DOT tSapIngressIPv6CriteriaIpPrecMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.32	Dot1PPriority	read-create
DOT tSapIngressIPv6CriteriaIpPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.31	Dot1PPriority	read-create
DOT tSapIngressMacCriteriaDot1PMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.13	Dot1PPriority	read-create
DOT tSapIngressMacCriteriaDot1PValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.12	Dot1PPriority	read-create
InetAddress (2)
IP tSapEgrIPCritDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.11	InetAddress	read-create	The value of tSapEgrIPCritDestIpAddr specifies the IP or IPv6 address to match with destination-IP of the packet.
IP tSapEgrIPCritSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.8	InetAddress	read-create	The value of tSapEgrIPCritSourceIpAddr specifies the IP or IPv6 address to match with source-IP of the packet.
InetAddressIPv6 (2)
ADR tSapIngressIPv6CriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.8	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaDestIpAddr specifies the IPv6 address to match with destination-IPv6 of the packet.
ADR tSapIngressIPv6CriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.6	InetAddressIPv6	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpAddr specifies the IPv6 address to match with source-IPv6 of the packet.
InetAddressPrefixLength (4)
ADR tSapEgrIPCritDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.12	InetAddressPrefixLength	read-create	The value of tSapEgrIPCritDestIpMask specifies the number of bits of the destination IP or IPv6 address to match.
ADR tSapEgrIPCritSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.9	InetAddressPrefixLength	read-create	The value of tSapEgrIPCritSourceIpMask specifies the number of bits of the source IP or IPv6 address to match.
ADR tSapIngressIPv6CriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.9	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaDestIpMask specifies the prefix is the number of bits of the destination IPv6 address to match.
ADR tSapIngressIPv6CriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.7	InetAddressPrefixLength	read-create	The value of the object tSapIngressIPv6CriteriaSourceIpMask specifies the prefix is the number of bits of the source IPv6 address to match.
InetAddressType (3)
IPt tSapEgrIPCritAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.1	InetAddressType	not-accessible	The value of tSapEgrIPCritAddrType specifies the index address type this entry should match against.
IPt tSapEgrIPCritDestIpAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.10	InetAddressType	read-create	The value of tSapEgrIPCritDestIpAddrType specifies the address type of tSapEgrIPCritDestIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
IPt tSapEgrIPCritSourceIpAddrType	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.7	InetAddressType	read-create	The value of tSapEgrIPCritSourceIpAddrType specifies the address type of tSapEgrIPCritSourceIpAddr. If the value of this object is not 'none', it must have the same value as tSapEgrIPCritAddrType.
INTEGER (14)
INT tAtmTdpCLPTagging	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.14	INTEGER	read-create	tAtmTdpCLPTagging controls the setting of the CLP bit in the ATM cell header for egress traffic on an IES or VPRN SAP. If disabled (the default), all traffic has the CLP bit set to zero. If enabled, traffic queued on expedited queues has the CLP bit set to zero, while traffic on non-expedited queues has the CLP bit set to one.
INT tAtmTdpPolicing	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.13	INTEGER	read-create	tAtmTdpPolicing determines whether ingress traffic is policed. Policing by default is disabled. Policing is valid for CBR, UBR RT-VBR and NRT-VBR. This is cell-based policing. tAtmTdpDescrType Policing Scheme Applicable Serv Cat clp0And1pcr CBR.1 CBR and UBR clp0And1pcrPlusClp0And1scr VBR.1 RT/NRT-VBR clp0And1pcrPlusClp0scr VBR.2 RT/NRT-VBR clp0And1pcrPlusClp0scrTag VBR.3 RT/NRT-VBR
INT tAtmTdpShaping	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.6	INTEGER	read-create	tAtmTdpShaping determines whether egress shaping should occur. The default tAtmTdpShaping is determined by the Service Category. The following default applies for tAtmTdpShaping depending upon a given service category: Applicable Service Category Default Shaping Value UBR disabled CBR enabled RT-VBR enabled NRT-VBR enabled For a Service Category of UBR, tAtmTdpShaping cannot be enabled. For CBR and RT-VBR service cateories disabling shaping is MDA-dependent. Shaping is only applied in the egress direction.
INT tNetworkQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.10	INTEGER	read-create	tNetworkQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
INT tQosEgrQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.8	INTEGER	read-create	The value of tQosEgrQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers.
INT tQosIngQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.9	INTEGER	read-create	tQosIngQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
INT tQosPolicerArbiterTier	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.1	INTEGER	not-accessible	The value of tQosPolicerArbiterTier identifies the tier of the policer control policy arbiter.
INT tSapEgressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.8	INTEGER	read-create	tSapEgressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
INT tSapIngressMacCriteriaSnapOui	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.20	INTEGER	read-create	whether to match snap-oui, and what to match.
INT tSapIngressQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.9	INTEGER	read-create	tSapIngressQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
INT tSharedQueueExpedite	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.10	INTEGER	read-create	tSharedQueueExpedite specifies the priority that this queue should be assigned by the hardware level schedulers. The value 'auto-expedited' implies that this attribute should be dynamically updated by looking at the forwarding classes mapping into this queue. In such a case the queue is treated as 'non-expedited' if there is even a single non-expedited forwarding class using this queue.
INT tSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.4	INTEGER	read-create	tSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeHiAdminStatus is set to 'down', the RED slope is inactive.
INT tSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.8	INTEGER	read-create	tSlopeLoAdminStatus specifies the admin state for the high priority RED slope. If the tSlopeLoAdminStatus is set to 'down', the RED slope is inactive.
INT tVirtualSchedulerTier	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.1	INTEGER	not-accessible	Tier to which this scheduler belongs to.
Integer32 (13)
I32 tAdvCfgAbvOffCapRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.17	Integer32	read-create	The value of tAdvCfgAbvOffCapRate specifies the explicit number of kilobits-per-second that should be used as the limit to the child's fair share increase to the operational PIR. When the value of tAdvCfgAbvOffCapRate is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapRate is set to '-1', it means maximum rate.
I32 tAtmTdpIndexNext	1.3.6.1.4.1.6527.3.1.2.16.21.2	Integer32	read-only	This object contains an appropriate value to be used for tAtmTdpIndex when creating entries in the tAtmTdpTable. The value 0 indicates that no unassigned entries are available. To obtain the tAtmTdpIndex value for a new entry, the manager issues a management protocol retrieval operation to obtain the current value of this object. After each retrieval, the agent should modify the value to the next unassigned index. After a manager retrieves a value the agent will determine through its local policy when this index value will be made available for reuse.
I32 tAtmTdpsCurrentlyConfigured	1.3.6.1.4.1.6527.3.1.2.16.21.4	Integer32	read-only	This object contains the number of currently configured ATM Traffic Descriptor Profiles on this system.
I32 tAtmTdpsMaxSupported	1.3.6.1.4.1.6527.3.1.2.16.21.3	Integer32	read-only	This object contains the maximum number of ATM Traffic Descriptor Profiles that can be configured on this system.
I32 tAtmTdpWeight	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.15	Integer32	read-create	The value of tAtmTdpWeight specifies the relative weight assigned to this ATM traffic descriptor with respect to ATM VP shaper scheduling. The value of tAtmTdpWeight is only relevant for MDA where the value of TIMETRA-CHASSIS-MIB::tmnxMDAAtmMode is equal to max16kVc, and is ignored otherwise. If the value of tAtmTdpWeight is not specified when the conceptual row is created, the weight is derived from the ATM service category: CBR 10 rt-VBR 7 nrt-VBR 5 UBR+ (nonzero MIR) 2 UBR (zero MIR) 1.
I32 tFCValue	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.4	Integer32	read-create	FC Value.
I32 tQ1NamedPoolAmbrAlrmThresh	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.12	Integer32	read-create	The value of tQ1NamedPoolAmbrAlrmThresh specifies the threshold for the amber alarm on the over-subscription allowed.
I32 tQ1NamedPoolRedAlrmThresh	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.13	Integer32	read-create	The value of tQ1NamedPoolRedAlrmThresh specifies the threshold for the red alarm on the over-subscription allowed.
I32 tQ1NamedPoolReservedCbs	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.9	Integer32	read-create	The value of tQ1NamedPoolReservedCbs specifies the reserved CBS size of the pool. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
I32 tQ1NamedPoolResvCbsAmbrAlrmMax	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.11	Integer32	read-create	The value of tQ1NamedPoolResvCbsAmbrAlrmMax specifies the maximum percentage for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmMax is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmMax MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmStep. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared. Max reserved CBS must not be more than the reserved CBS.
I32 tQ1NamedPoolResvCbsAmbrAlrmStep	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.10	Integer32	read-create	The value of tQ1NamedPoolResvCbsAmbrAlrmStep specifies the percentage step-size for the reserved CBS size of the pool. When tQ1NamedPoolResvCbsAmbrAlrmStep is set to default value, the adaptive CBS sizing is disabled. To enable adaptive CBS sizing, tQ1NamedPoolResvCbsAmbrAlrmStep MUST be set to non-default value along with tQ1NamedPoolResvCbsAmbrAlrmMax. When reserved CBS is default adaptive CBS sizing cannot be enabled. The reserved CBS (Committed Burst Size) defines the amount of buffer space within the pool that is not considered shared.
I32 tSapIngressMacCriteriaEthernetType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.14	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
I32 tSapIngressMacCriteriaSnapPid	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.19	Integer32	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
IpAddress (2)
IP tSapIngressIPCriteriaDestIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.8	IpAddress	read-create	IP address to match with destination-IP of the packet.
IP tSapIngressIPCriteriaSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.6	IpAddress	read-create	IP address to match with source-IP of the packet.
IpAddressPrefixLength (2)
ADR tSapIngressIPCriteriaDestIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.9	IpAddressPrefixLength	read-create	the prefix is the number of bits of the destination IP address to match.
ADR tSapIngressIPCriteriaSourceIpMask	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.7	IpAddressPrefixLength	read-create	the prefix is the number of bits of the source IP address to match.
MacAddress (4)
MAC tSapIngressMacCriteriaDstMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.10	MacAddress	read-create
MAC tSapIngressMacCriteriaDstMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.11	MacAddress	read-create
MAC tSapIngressMacCriteriaSrcMacAddr	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.8	MacAddress	read-create
MAC tSapIngressMacCriteriaSrcMacMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.9	MacAddress	read-create
QTagFullRange (2)
QTA tSapIngressMacCritInnerTagMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.24	QTagFullRange	read-create	The value of tSapIngressMacCritInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tSapIngressMacCritInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
QTA tSapIngressMacCritOuterTagMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.26	QTagFullRange	read-create	The value of tSapIngressMacCritOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tSapIngressMacCritOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'.
QTagFullRangeOrNone (2)
QTA tSapIngressMacCritInnerTagValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.23	QTagFullRangeOrNone	read-create	The value of tSapIngressMacCritInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no VLAN tag matching will be performed.
QTA tSapIngressMacCritOuterTagValue	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.25	QTagFullRangeOrNone	read-create	The value of tSapIngressMacCritOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tSapIngressMacCritType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
RowStatus (63)
ROW tAdvCfgPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.2	RowStatus	read-create	The value of tAdvCfgPolicyRowStatus is used for the creation and deletion of advanced configuration policies.
ROW tAtmTdpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.10	RowStatus	read-create	tAtmTdpRowStatus is used to create/modify/delete a new row in this table. Only createAndGo/Active/Destroy are supported
ROW tDSCPNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.2	RowStatus	read-create	Row Status of the entry.
ROW tFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.2	RowStatus	read-create	Row Status of the entry.
ROW tHsmdaPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.2	RowStatus	read-create	The value of tHsmdaPoolPolicyRowStatus is used for the creation and deletion of HSMDA pool policies.
ROW tHsmdaSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.2	RowStatus	read-create	The value of tHsmdaSchedulerPlcyRowStatus is used for the creation and deletion of HSMDA scheduler policies.
ROW tHsmdaSlopePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.2	RowStatus	read-create	The value of tHsmdaSlopePolicyRowStatus is used for the creation and deletion of HSMDA slope policies.
ROW tHsmdaWrrPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.2	RowStatus	read-create	The value of tHsmdaWrrPolicyRowStatus is used for the creation and deletion of entries in the tHsmdaWrrPolicyTable.
ROW tMcFrEgrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.4	RowStatus	read-create	The value of tMcFrEgrProfRowStatus controls the creation and deletion of rows in this table.
ROW tMcFrIngrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.4	RowStatus	read-create	The value of tMcFrIngrProfRowStatus controls the creation and deletion of rows in this table.
ROW tMcMlpppEgrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.4	RowStatus	read-create	The value of tMcMlpppEgrProfRowStatus controls the creation and deletion of rows in this table.
ROW tMcMlpppIngrProfRowStatus	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.4	RowStatus	read-create	The value of tMcMlpppIngrProfRowStatus controls the creation and deletion of rows in this table.
ROW tNamedPoolPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.2	RowStatus	read-create	The value of tNamedPoolPolicyRowStatus is used for creation or deletion of named pool policies.
ROW tNetworkEgressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.2	RowStatus	read-create	The value of tNetworkEgressDSCPRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressDSCPProfile must be specified when row is created.
ROW tNetworkEgressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.2	RowStatus	read-create	The value of tNetworkEgressPrecRowStatus is used for the creation and the deletion of rows in this table. The value of tNetworkEgressPrecProfile must be specified when row is created.
ROW tNetworkIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.2	RowStatus	read-create
ROW tNetworkIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.2	RowStatus	read-create
ROW tNetworkIngressLSPEXPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.2	RowStatus	read-create
ROW tNetworkPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.2	RowStatus	read-create
ROW tNetworkQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.2	RowStatus	read-create	Row Status for this queue.
ROW tNetworkQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.2	RowStatus	read-create
ROW tNetworkQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
ROW tPortSchedulerPlcyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.2	RowStatus	read-create	The value of tPortSchedulerPlcyRowStatus is used for the creation and deletion of port scheduler policies.
ROW tPortSchPlcyGrpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.2	RowStatus	read-create	The value of tPortSchPlcyGrpRowStatus is used for the creation and deletion of port scheduler policies.
ROW tQ1NamedPoolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.3	RowStatus	read-create	The value of tQ1NamedPoolRowStatus is used for creation or deletion of Q1 named pools.
ROW tQosEgrPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.2	RowStatus	read-create	tQosEgrPolicerRowStatus allows entries to be created and deleted in the tQosEgrPolicerTable.
ROW tQosEgrQGroupFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.2	RowStatus	read-create	The value of tQosEgrQGroupFCRowStatus specifies the Row Status for this entry.
ROW tQosEgrQGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.2	RowStatus	read-create	tQosEgrQGroupRowStatus allows entries to be created and deleted in the tQosEgrQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
ROW tQosEgrQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.2	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
ROW tQosIngPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.2	RowStatus	read-create	tQosIngPolicerRowStatus allows entries to be created and deleted in the tQosIngPolicerTable.
ROW tQosIngQGroupRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.2	RowStatus	read-create	tQosIngQGroupRowStatus allows entries to be created and deleted in the tQosIngQGroupTable. The deletion of an entry in this table will fail if the queue is being referenced by a forwarding class mapping in the queue policy.
ROW tQosIngQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.2	RowStatus	read-create	tQosIngQueueRowStatus is the Row-Status of the entry. This allows creation/deletion of rows in this table.
ROW tQosPolicerArbiterRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.3	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
ROW tQosPolicerCtrlPolRowStatus	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.2	RowStatus	read-create	This is the Row Status of the entry. This allows creation/deletion of rows in this table.
ROW tSapEgressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.2	RowStatus	read-create	tSapEgressDot1pRowStatus allows entries to be created and deleted in the tSapEgressDot1pTable.
ROW tSapEgressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.2	RowStatus	read-create	The value of tSapEgressDSCPRowStatus controls the creation/deletion of rows in this table.
ROW tSapEgressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.2	RowStatus	read-create	Row Status for this queue.
ROW tSapEgressHsmdaQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.2	RowStatus	read-create	The value of tSapEgressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapEgressHsmdaQueueTable.
ROW tSapEgressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.2	RowStatus	read-create	The value of tSapEgressPrecRowStatus controls the creation/deletion of rows in this table.
ROW tSapEgressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.2	RowStatus	read-create	Row Status of the entry.
ROW tSapEgressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.2	RowStatus	read-create	Row Status of this policy's entry.
ROW tSapEgrIPCritRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.3	RowStatus	read-create	The value of tSapEgrIPCritRowStatus is used for the creation and deletion of sap-egress IP or IPv6 criteria entries.
ROW tSapEgrPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.2	RowStatus	read-create	tSapEgrPolicerRowStatus allows entries to be created and deleted in the tSapEgrPolicerTable.
ROW tSapEgrPolicyNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.2	RowStatus	read-only	This value of the object tSapEgrPolicyNameRowStatus specifies the status of this row.
ROW tSapIngPolicerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.2	RowStatus	read-create	tSapIngPolicerRowStatus allows entries to be created and deleted in the tSapIngPolicerTable.
ROW tSapIngPolicyNameRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.2	RowStatus	read-only	This value of the object tSapIngPolicyNameRowStatus specifies the status of this row.
ROW tSapIngressDot1pRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.2	RowStatus	read-create	Row Status for this sap-ingress policy's dot1p entry.
ROW tSapIngressDSCPRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.2	RowStatus	read-create	This object allows creation/deletion of rows in this table.
ROW tSapIngressFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.2	RowStatus	read-create	Row Status for this queue.
ROW tSapIngressHsmdaQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.2	RowStatus	read-create	The value of tSapIngressHsmdaQueueRowStatus is used for the creation and deletion of entries in the tSapIngressHsmdaQueueTable.
ROW tSapIngressIPCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.2	RowStatus	read-create	Row Status for the IP Criteria entry.
ROW tSapIngressIPv6CriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.2	RowStatus	read-create	The value of the object tSapIngressIPv6CriteriaRowStatus specifies the Row Status for the IPv6 Criteria entry.
ROW tSapIngressLspExpRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.2	RowStatus	read-create	The value of tSapIngressLspExpRowStatus specifies the Row Status for this mapping.
ROW tSapIngressMacCriteriaRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.2	RowStatus	read-create
ROW tSapIngressPrecRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.2	RowStatus	read-create	Row Status for this mapping.
ROW tSapIngressQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
ROW tSapIngressRowStatus	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.2	RowStatus	read-create	Row Status for the policy. The deletion of this row has an action of removing the dependent rows in the following tables : - tSapIngressQueueTable - tSapIngressDSCPTable - tSapIngressDot1pTable
ROW tSchedulerPolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.2	RowStatus	read-create	Row Status of the entry.
ROW tSharedQueueFCRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.2	RowStatus	read-create	tSharedQueueFCRowStatus allows entries to be created and deleted in the tSharedQueueFCTable. Deletion of an entry from this table will cause the forwarding class to use the default mapping.
ROW tSharedQueuePolicyRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.2	RowStatus	read-create	tSharedQueuePolicyRowStatus allows entries to be created and deleted in the tSharedQueuePolicyTable. The deletion of an entry in this table will fail if the action is performed on the default policy or the policy is being used within the system.
ROW tSharedQueueRowStatus	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.2	RowStatus	read-create	tSharedQueueRowStatus allows entries to be created and deleted in the tSharedQueueTable. The deletion of an entry in this table will fail if the action is performed on the default queue or if the queue is being referenced by a forwarding class mapping in the queue policy.
ROW tSlopeRowStatus	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.2	RowStatus	read-create	Row Status of the entry. This allows creation/deletion of rows in this table.
ROW tVirtualSchedulerRowStatus	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.3	RowStatus	read-create	Row Status of the entry.
ServiceAccessPoint (4)
NUM tSapIngressMacCriteriaDSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.15	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaDSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.16	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaSSAP	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.17	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
NUM tSapIngressMacCriteriaSSAPMask	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.18	ServiceAccessPoint	read-create	the ethernet type, ssap/dsap, and snap-pid match criteria are mutually exclusive and only one can be set per entry.
StorageType (2)
STO tDSCPNameStorageType	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.3	StorageType	read-create	The storage type of this row in the table.
STO tFCStorageType	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.3	StorageType	read-create	The storage type of this row in the table.
TAdaptationRule (23)
TAD tNetworkEgrHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.3	TAdaptationRule	read-write	The value of tNetworkEgrHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tNetworkQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.23	TAdaptationRule	read-create	The value of tNetworkQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TAD tNetworkQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.24	TAdaptationRule	read-create	The value of tNetworkQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational value while maintaining the minimum offset.
TAD tQosEgrPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosEgrPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosEgrQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.13	TAdaptationRule	read-create	The value of tQosEgrQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosEgrQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.12	TAdaptationRule	read-create	The value of tQosEgrQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosIngPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosIngPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosIngQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.14	TAdaptationRule	read-create	tQosIngQueueCIRAdaptation specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tQosIngQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.13	TAdaptationRule	read-create	tQosIngQueuePIRAdaptation specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgressHsmdaQueueCIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.3	TAdaptationRule	read-create	The value of tSapEgressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset. This object is obsoleted in 10.0 Release.
TAD tSapEgressHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.4	TAdaptationRule	read-create	The value of tSapEgressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.12	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgrPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapEgrPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngPolicerCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.6	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngPolicerPIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.5	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngressHsmdaQueueCIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.4	TAdaptationRule	read-create	The value of tSapIngressHsmdaQueueCIRAdaptn specifies the adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngressHsmdaQueuePIRAdaptn	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.5	TAdaptationRule	read-create	The value of tSapIngressHsmdaQueuePIRAdaptn specifies the adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngressQueueCIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.14	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational CIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAD tSapIngressQueuePIRAdaptation	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.13	TAdaptationRule	read-create	The adaptation rule to be used while computing the operational PIR value. The adaptation rule specifies the rules to compute the operational values while maintaining minimum offset.
TAdvCfgRate (3)
TAD tAdvCfgBWDGranRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.19	TAdvCfgRate	read-create	The value of tAdvCfgBWDGranRate specifies the explicit number of kilobits-per-second that should be used as the child's rounding step value. When the value of tAdvCfgBWDGranRate is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
TAD tAdvCfgChildAdminRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.6	TAdvCfgRate	read-create	The value of tAdvCfgChildAdminRate specifies the explicit number of kilobits-per-second that should be added to the child's offered rate. When the value of tAdvCfgChildAdminRate is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
TAD tAdvCfgOMGranRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.8	TAdvCfgRate	read-create	The value of tAdvCfgOMGranRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate change sensitivity value. When the value of tAdvCfgOMGranRate is set to '0', the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName are restored.
TAtmTdpDescrType (1)
TAT tAtmTdpDescrType	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.11	TAtmTdpDescrType	read-create	tAtmTdpDescrType identifies the types of ATM traffic descriptor. The default is determined by the value of tAtmTdpServCat. The following default rules apply: Applicable Service Category tAtmTdpDescrType UBR clp0And1pcr CBR clp0And1pcr RT-VBR clp0And1pcrPlusClp0And1scr NRT-VBR clp0And1pcrPlusClp0And1scr
TBurstHundredthsOfPercent (2)
TBU tNetworkQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.13	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
TBU tNetworkQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.14	TBurstHundredthsOfPercent	read-create	The percentage of reserved buffer space for the queue, defined to two decimal places.
TBurstLimit (4)
TBU tQosEgrQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.31	TBurstLimit	read-create	The value of tQosEgrQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tQosIngQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.22	TBurstLimit	read-create	The value of tQosIngQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tSapEgressQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.29	TBurstLimit	read-create	The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBU tSapIngressQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.24	TBurstLimit	read-create	The value of tSapIngressQueueBurstLimit specifies the explicit shaping burst size of a queue.
TBurstPercent (2)
TBU tSharedQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.13	TBurstPercent	read-create	tSharedQueueCBS specifies the committed burst size as a percentage of maximum reserved buffer space for the queue.
TBU tSharedQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.14	TBurstPercent	read-create	tSharedQueueMBS specifies the maximum burst size as a percentage of maximum reserved buffer space for the queue.
TBurstPercentOrDefault (10)
TBU tNetworkQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.15	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TBU tQosEgrPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.14	TBurstPercentOrDefault	read-create	tQosEgrPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
TBU tQosEgrQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.11	TBurstPercentOrDefault	read-create	The value of tQosEgrQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
TBU tQosIngPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.14	TBurstPercentOrDefault	read-create	tQosIngPolicerHiPrioOnly specifies the percentage of buffer space for the queue, used to configure the percentage of the policer's PIR leaky bucket's MBS (maximum burst size) that is reserved for high priority traffic.
TBU tQosIngQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.12	TBurstPercentOrDefault	read-create	tQosIngQueueHiPrioOnly specifies the percentage of buffer space for the queue, used exclusively by high priority packets.
TBU tSapEgressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.11	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TBU tSapEgrPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.14	TBurstPercentOrDefault	read-create	The tSapEgrPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
TBU tSapIngPolicerHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.14	TBurstPercentOrDefault	read-create	The tSapIngPolicerHiPrioOnly specifies the percentage of PIR leaky bucket's MBS (maximum burst size) of this policer that is reserved for high priority traffic.
TBU tSapIngressQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.12	TBurstPercentOrDefault	read-create	The percentage of buffer space for the queue, used exclusively by high priority packets.
TBU tSharedQueueHiPrioOnly	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.15	TBurstPercentOrDefault	read-create	tSharedQueueHiPrioOnly specifies the percentage of buffer space to be exclusively by high priority packets as a percentage of maximum reserved buffer space for the queue.
TBurstSize (8)
TBU tQosEgrQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.9	TBurstSize	read-create	The value of tQosEgrQueueCBS specifies the amount of reserved buffer space for the queue.
TBU tQosEgrQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.10	TBurstSize	read-create	The value of tQosEgrQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosEgrQueueMBSBytes object.
TBU tQosIngQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.10	TBurstSize	read-create	tQosIngQueueCBS specifies the amount of reserved buffer space for the queue.
TBU tQosIngQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.11	TBurstSize	read-create	tQosIngQueueMBS specifies the maximum amount of buffer space allowed for the queue. This object has been replaced with tQosIngQueueMBSBytes object.
TBU tSapEgressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.9	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TBU tSapEgressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.10	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapEgressQueueMBSBytes object.
TBU tSapIngressQueueCBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.10	TBurstSize	read-create	The amount of reserved buffer space (in kilo bytes) for the queue.
TBU tSapIngressQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.11	TBurstSize	read-create	The maximum amount of buffer space (in kilo bytes) allowed for the queue. This object has been replaced with tSapIngressQueueMBSBytes object.
TBurstSizeBytes (4)
TBU tQosEgrQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.27	TBurstSizeBytes	read-create	The value of tQosEgrQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
TBU tQosIngQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.21	TBurstSizeBytes	read-create	tQosIngQueueMBSBytes specifies the maximum amount of buffer space allowed for the queue.
TBU tSapEgressQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.28	TBurstSizeBytes	read-create	The maximum amount of buffer space (in bytes) allowed for the queue.
TBU tSapIngressQueueMBSBytes	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.23	TBurstSizeBytes	read-create	The maximum amount of buffer space (in bytes) allowed for the queue.
TBWRateType (2)
TBW tSapEgressQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.33	TBWRateType	read-create	The value of tSapEgressQueueRateType specifies the type of Egress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapEgressQueueAdminCIRPercent and tSapEgressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the egress queue rates are specified in percentage. The objects tSapEgressQueueAdminCIR and tSapEgressQueueAdminPIR will be set to their default values.
TBW tSapIngressQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.27	TBWRateType	read-create	The value of tSapIngressQueueRateType specifies the type of Ingress Queue rate. When the value of the object is set to 'kbps', the ingresss queue rates are specified in kbps. The objects tSapIngressQueueAdminCIRPercent and tSapIngressQueueAdminPIRPercent will be set to their default values. When the value of the object is set to either 'percentOfPortLimit' or 'percentOfLocalLimit', the ingress queue rates are specified in percentage. The objects tSapIngressQueueAdminCIR and tSapIngressQueueAdminPIR will be set to their default values.
TCIRRate (6)
TCI tQosEgrQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.15	TCIRRate	read-create	The value of tQosEgrQueueAdminCIR specifies the administrative CIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
TCI tQosIngQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.16	TCIRRate	read-create	tQosIngQueueAdminCIR specifies the administrative CIR specified by the user.
TCI tSapEgressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.15	TCIRRate	read-create	The administrative CIR specified by the user.
TCI tSapEgressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.17	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TCI tSapIngressQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.16	TCIRRate	read-create	The administrative CIR specified by the user.
TCI tSapIngressQueueOperCIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.18	TCIRRate	read-only	The operational value derived by computing the CIR value from the administrative CIR and PIR values and their corresponding adaptation rules.
TClassBurstLimit (11)
TCL tHsmdaSchedulerPlcyBrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.32	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyBrstLimit specifies the explicit shaping burst size for this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyGrp1BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.33	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyGrp1BrstLimit specifies the explicit shaping burst size for group 1 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyGrp2BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.34	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyGrp2BrstLimit specifies the explicit shaping burst size for group 2 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl1BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.35	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl1BrstLimit specifies the explicit shaping burst size for level 1 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl2BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.36	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl2BrstLimit specifies the explicit shaping burst size for level 2 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl3BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.37	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl3BrstLimit specifies the explicit shaping burst size for level 3 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl4BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.38	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl4BrstLimit specifies the explicit shaping burst size for level 4 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl5BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.39	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl5BrstLimit specifies the explicit shaping burst size for level 5 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl6BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.40	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl6BrstLimit specifies the explicit shaping burst size for level 6 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl7BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.41	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl7BrstLimit specifies the explicit shaping burst size for level 7 of this HSMDA scheduler policy.
TCL tHsmdaSchedulerPlcyLvl8BrstLimit	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.42	TClassBurstLimit	read-create	The value of tHsmdaSchedulerPlcyLvl8BrstLimit specifies the explicit shaping burst size for level 8 of this HSMDA scheduler policy.
TDEProfileOrDei (1)
TDE tNetworkIngressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.4	TDEProfileOrDei	read-create	there is no DEFVAL for this object. It must be deliberately set before activating the row.
TDEValue (2)
TDE tNetworkEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.9	TDEValue	read-write	The value of tNetworkEgressFCForceDEValue specifies the DE value to set for network egress packets in this forwarding class regardless of profile status of the frames. An inconsistentValue error is returned if this object is set to any value other than '-1', when tNetworkEgressFCDEMark object is set to 'false'.
TDE tSapEgressFCForceDEValue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.10	TDEValue	read-create	The value of tSapEgressFCForceDEValue specifies the DE value to set for all the frames of this forwarding class regardless of frame's profile status. An inconsistentValue error is returned if this object is set to any value other than '-1', when tSapEgressFCDEMark object is set to 'false'.
TDSCPName (5)
TDS tDSCPName	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.1	TDSCPName	not-accessible	The name assigned to the DSCP Value.
TDS tNetworkEgressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.1	TDSCPName	not-accessible	The value of tNetworkEgressDSCP indicates the DSCP value for which the mapping is done. It is used as a secondary index for tNetworkEgressDSCPTable.
TDS tNetworkIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.1	TDSCPName	not-accessible
TDS tSapEgressDSCP	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.1	TDSCPName	not-accessible
TDS tSapIngressDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.1	TDSCPName	not-accessible
TDSCPNameOrEmpty (5)
TDS tNetworkEgressFCDSCPInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.2	TDSCPNameOrEmpty	read-write	the DSCP to use for in-profile traffic.
TDS tNetworkEgressFCDSCPOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.3	TDSCPNameOrEmpty	read-write	the DSCP to use for out-of-profile traffic.
TDS tSapEgrIPCritDSCP	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.20	TDSCPNameOrEmpty	read-create	The value of tSapEgrIPCritDSCP specifies the DSCP value to match in the packet
TDS tSapIngressIPCriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.17	TDSCPNameOrEmpty	read-create	DSCP value to match in the packet
TDS tSapIngressIPv6CriteriaDSCP	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.17	TDSCPNameOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaDSCP specifies the DSCP value to match in the packet
TDSCPValue (1)
TDS tDSCPNameDscpValue	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.4	TDSCPValue	read-create	The DSCP Value.
TEgressHsmdaCounterIdOrZero (3)
NUM tSapEgressDSCPHsmdaCntrOverride	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.4	TEgressHsmdaCounterIdOrZero	read-create	The value of the object tSapEgressDSCPHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapEgressDSCP. A value of zero implies that the default counters should be used.
NUM tSapEgressPrecHsmdaCntrOverride	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.4	TEgressHsmdaCounterIdOrZero	read-create	The value of tSapEgressPrecHsmdaCntrOverride specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapEgressPrecValue. A value of zero implies that the default counters should be used.
NUM tSapEgrIPCritActionHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.6	TEgressHsmdaCounterIdOrZero	read-create	The value of the object tSapEgrIPCritActionHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-egress policy specified by tSapEgressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used.
TEgressHsmdaPerPacketOffset (1)
TEG tSapEgressHsmdaPacketOffset	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.6	TEgressHsmdaPerPacketOffset	read-create	The value of tSapEgressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting.
TEgressHsmdaQueueId (3)
TEG tNetworkEgrHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.1	TEgressHsmdaQueueId	not-accessible	The value of tNetworkEgrHsmdaQueue indicates the HSMDA queue ID used as the secondary index to the table entry.
TEG tSapEgressFCHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.6	TEgressHsmdaQueueId	read-create	The HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA.
TEG tSapEgressHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.1	TEgressHsmdaQueueId	not-accessible	The HSMDA queue ID is used as the secondary index to the table entry.
TEgressQPerPacketOffset (1)
TEG tSapEgressQueuePktOffset	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.30	TEgressQPerPacketOffset	read-create	The value of tSapEgressQueuePktOffset specifies the per packet byte offset for this queue.
TEgressQueueId (5)
TEG tNetworkEgressFCQGrpQueue	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.11	TEgressQueueId	read-write	tNetworkEgressFCQGrpQueue specifies the specific queue from queue-group TIMETRA-VRTR-MIB::vRtrIfQosQGrp to be used for packets in this forwarding class.
TEG tQosEgrQGroupFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.4	TEgressQueueId	read-create	The value of tQosEgrQGroupFCQueue specifies the queue to be used for the packets in this forwarding class.
TEG tQosEgrQueue	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.1	TEgressQueueId	not-accessible	The value of tQosEgrQueue identifies the queue index which is used as the second index to the table entry. Zero is not allowed.
TEG tSapEgressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.3	TEgressQueueId	read-create	The queue to use for packets in this forwarding class. When tSapEgressFCQGrp is set to its default value, tSapEgressFCQueue represents the local queue to which traffic will be forwarded. When tSapEgressFCQGrp is set to a non-default value, tSapEgressFCQueue represents the queue within the specified queue-group to which traffic will be forwarded.
TEG tSapEgressQueueIndex	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.1	TEgressQueueId	not-accessible	the number of a queue. zero is not allowed. for sap-egress, only three queues are allowed, so the queue index range is restricted.
TEgrPolicerId (2)
TEG tQosEgrPolicerId	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.1	TEgrPolicerId	not-accessible	tQosEgrPolicerId defines the Egress Queue Group Policer identifier. It identifies an egress queue group policer in the managed system.
TEG tSapEgrPolicerId	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.1	TEgrPolicerId	not-accessible	tSapEgrPolicerId defines the SAP Egress Policer identifier. It identifies an sap-egress policer in the managed system.
TEgrPolicerIdOrNone (2)
TEG tNetworkEgressFCQGrpPolicer	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.12	TEgrPolicerIdOrNone	read-write	The value of tNetworkEgressFCQGrpPolicer specifies the policer from queue-group to be used for packets in this forwarding class.
TEG tSapEgressFCPolicer	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.17	TEgrPolicerIdOrNone	read-create	The value of tSapEgressFCPolicer specifies the SAP Egress Policer identifier. If a corresponding Sap Egress Policer Id does not exist in tSapEgrPolicerTable, an 'inconsistentValue' error will be returned. When tSapEgressFCPolicer is set to its default value, then traffic for this forwarding class will not use policers. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to default, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a system determined queue-group queue. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to default, then traffic will use the given policer, and then feed into a queue within the given queue-group according to the appropriate tQosEgrQGroupFCEntry. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set to a non-default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given queue within the given queue-group. When tSapEgressFCPolicer is set to a non-default value, and tSapEgressFCQGrp is set its default value, and tSapEgressFCQueue is set to a non-default value, then trafifc will use the given policer, and then feed into the given local queue.
TEntryId (3)
TEN tSapIngressIPCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.1	TEntryId	not-accessible	unique identifier separates this entry from others in this policy.
TEN tSapIngressIPv6CriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.1	TEntryId	not-accessible	The value of the object tSapIngressIPv6CriteriaIndex specifies uniquely each entry in the policy.
TEN tSapIngressMacCriteriaIndex	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.1	TEntryId	not-accessible
TFCName (14)
TFC tFCName	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.1	TFCName	not-accessible	Forwarding class name.
TFC tMcMlpppEgrFCName	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.1	TFCName	not-accessible	The value tMcMlpppEgrFCName specifies of the name of the forwarding class.
TFC tNetworkEgressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.4	TFCName	read-create	The value of tNetworkEgressDSCPFC will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TFC tNetworkEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.1	TFCName	not-accessible	the name of the forwarding class (FC).
TFC tNetworkEgressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.4	TFCName	read-create	The value of tNetworkEgressPrecFC will overwrite the forwarding class derived from egress. The new forwarding class is used for egress remarking and queue mapping decisions.
TFC tNetworkIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.3	TFCName	read-create
TFC tNetworkIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.3	TFCName	read-create
TFC tNetworkIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.1	TFCName	not-accessible	The value of tNetworkIngressFCName specifies the name of the forwarding class (FC).
TFC tNetworkIngressLSPEXPFC	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.3	TFCName	read-create
TFC tNetworkPolicyIngressDefaultActionFC	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.7	TFCName	read-create	tNetworkPolicyIngressDefaultActionFC specifies the default forwarding class to be used while classifying the ingress traffic.
TFC tNetworkQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.1	TFCName	not-accessible	Forwarding class name.
TFC tQosEgrQGroupFCName	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.1	TFCName	not-accessible	The value of the object tQosEgrQGroupFCName specifies the name of the forwarding class
TFC tSapEgressFCName	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.1	TFCName	not-accessible	forwarding class name.
TFC tSharedQueueFCName	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.1	TFCName	not-accessible	tSharedQueueFCName serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a forwarding class to queue mapping in the managed system.
TFCNameOrEmpty (4)
TFC tSapEgressDSCPfc	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.5	TFCNameOrEmpty	read-create	The value of tSapEgressDSCPfc, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TFC tSapEgressFCQGrpFC	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.18	TFCNameOrEmpty	read-create	The value of tSapEgressFCQGrpFC, when specified, will replace the forwarding class derived from ingress as the forwarding class to use inside the egress queue group. tSapEgressFCQGrpFC is only allowed to be used in conjunction with egress policers, and is mutually exclusive with direct queue-group queue mappings. An 'inconsistentValue' error is returned if tSapEgressFCQGrpFC is set to a non-default value when tSapEgressFCPolicer is set to default.
TFC tSapEgressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.5	TFCNameOrEmpty	read-create	The value of tSapEgressPrecFC, when specified, will overwrite the forwarding class derived from ingress. The new forwarding class is used for egress remarking and queue mapping decisions.
TFC tSapEgrIPCritActionFC	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.22	TFCNameOrEmpty	read-create	tSapEgrIPCritActionFC specifies the forwarding class to be used to classify all the traffic that matches the specific IP or IPv6 criteria. The value ''H indicates that the FC is derived from ingress classification and profiling functions.
TFrameType (1)
TFR tSapIngressMacCriteriaFrameType	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria.
THPolCIRRate (4)
THP tQosEgrPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.11	THPolCIRRate	read-create	tQosEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
THP tQosIngPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.11	THPolCIRRate	read-create	tQosIngPolicerAdminCIR specifies the administrative CIR specified by the user.
THP tSapEgrPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.11	THPolCIRRate	read-create	tSapEgrPolicerAdminCIR specifies the administrative CIR specified by the user.
THP tSapIngPolicerAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.11	THPolCIRRate	read-create	tSapIngPolicerAdminCIR specifies the administrative CIR specified by the user.
THPolPIRRate (6)
THP tQosEgrPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.10	THPolPIRRate	read-create	tQosEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tQosIngPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.10	THPolPIRRate	read-create	tQosIngPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tQosPolicerArbiterRate	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.6	THPolPIRRate	read-create	The value of tQosPolicerArbiterRate specifies the maximum frame based bandwidth limit of this policer control policy arbiter for the given tier.
THP tQosPolicerCtrlPolRootMaxRate	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.5	THPolPIRRate	read-create	The value of tQosPolicerCtrlPolRootMaxRate specifies the maximum frame based bandwidth limit of this policer.
THP tSapEgrPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.10	THPolPIRRate	read-create	tSapEgrPolicerAdminPIR specifies the administrative PIR specified by the user.
THP tSapIngPolicerAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.10	THPolPIRRate	read-create	tSapIngPolicerAdminPIR specifies the administrative PIR specified by the user.
THPolVirtualScheCIRRate (1)
THP tVirtualSchedulerCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.11	THPolVirtualScheCIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
THPolVirtualSchePIRRate (1)
THP tVirtualSchedulerPIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.10	THPolVirtualSchePIRRate	read-create	The rate allowed for this scheduler. A value of -1 implies maximum.
THSMDABurstSizeBytes (2)
THS tNetworkEgrHsmdaQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.5	THSMDABurstSizeBytes	read-write	The value of tNetworkEgrHsmdaQueueMBS specifies the maximum amount of buffer space, in bytes, allowed for this network egress HSMDA queue.
THS tSapEgressHsmdaQueueMBS	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.10	THSMDABurstSizeBytes	read-create	The value of tSapEgressHsmdaQueueMBS specifies the maximum amount of buffer space (in bytes) allowed for this HSMDA queue.
THsmdaCIRKRate (2)
THS tSapEgressHsmdaQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.6	THsmdaCIRKRate	read-create	The value of tSapEgressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user. This object is obsoleted in 10.0 Release.
THS tSapIngressHsmdaQueueAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.7	THsmdaCIRKRate	read-create	The value of tSapIngressHsmdaQueueAdminCIR specifies the administrative CIR specified by the user.
THsmdaPIRKRate (2)
THS tSapEgressHsmdaQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.5	THsmdaPIRKRate	read-create	The value of tSapEgressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
THS tSapIngressHsmdaQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.6	THsmdaPIRKRate	read-create	The value of tSapIngressHsmdaQueueAdminPIR specifies the administrative PIR specified by the user.
THsmdaPIRMRate (11)
THS tHsmdaSchedulerPlcyGrp1Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.30	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyGrp1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 1 for this HSMDA scheduler policy group.
THS tHsmdaSchedulerPlcyGrp2Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.31	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyGrp2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for group 2 for this HSMDA scheduler policy group.
THS tHsmdaSchedulerPlcyLvl1Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.5	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl1Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1GrpId. Setting tHsmdaSchedulerPlcyLvl1Rate to any value (including default) while tHsmdaSchedulerPlcyLvl1GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl1GrpId being set to default, and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl2Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.8	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl2Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2GrpId. Setting tHsmdaSchedulerPlcyLvl2Rate to any value (including default) while tHsmdaSchedulerPlcyLvl2GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl2GrpId being set to default, and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl3Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.11	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl3Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3GrpId. Setting tHsmdaSchedulerPlcyLvl3Rate to any value (including default) while tHsmdaSchedulerPlcyLvl3GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl3GrpId being set to default, and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl4Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.14	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl4Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4GrpId. Setting tHsmdaSchedulerPlcyLvl4Rate to any value (including default) while tHsmdaSchedulerPlcyLvl4GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl4GrpId being set to default, and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl5Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.17	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl5Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5GrpId. Setting tHsmdaSchedulerPlcyLvl5Rate to any value (including default) while tHsmdaSchedulerPlcyLvl5GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl5GrpId being set to default, and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl6Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.20	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl6Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6GrpId. Setting tHsmdaSchedulerPlcyLvl6Rate to any value (including default) while tHsmdaSchedulerPlcyLvl6GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl6GrpId being set to default, and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl7Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.23	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl7Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7GrpId. Setting tHsmdaSchedulerPlcyLvl7Rate to any value (including default) while tHsmdaSchedulerPlcyLvl7GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl7GrpId being set to default, and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl8Rate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.26	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyLvl8Rate specifies the explicit maximum frame based bandwidth limit, in megabits per second, for this HSMDA scheduler policy level. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8GrpId. Setting tHsmdaSchedulerPlcyLvl8Rate to any value (including default) while tHsmdaSchedulerPlcyLvl8GrpId is non-default, results in the level being removed from the group, tHsmdaSchedulerPlcyLvl8GrpId being set to default, and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.4	THsmdaPIRMRate	read-create	The value of tHsmdaSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit, in megabits per second, of this HSMDA scheduler policy.
THsmdaPolicyIncludeQueues (1)
THS tHsmdaWrrPolicyIncludeQueues	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.5	THsmdaPolicyIncludeQueues	read-create	The value of tHsmdaWrrPolicyIncludeQueues specifies the queues that can be scheduled in the same class in a Weighted Round Robin (WRR) fashion within the HSMDA scheduler.
THsmdaPolicyScheduleClass (1)
THS tHsmdaWrrPolicySchedUsingClass	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.6	THsmdaPolicyScheduleClass	read-create	The value of tHsmdaWrrPolicySchedUsingClass specifies which class to schedule the queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
THSMDAQueueBurstLimit (2)
THS tNetworkEgrHsmdaQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.8	THSMDAQueueBurstLimit	read-write	The value of tNetworkEgrHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
THS tSapEgressHsmdaQueueBurstLimit	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.11	THSMDAQueueBurstLimit	read-create	The value of tSapEgressHsmdaQueueBurstLimit specifies the explicit shaping burst size of the queue.
THsmdaSchedulerPolicyGroupId (8)
THS tHsmdaSchedulerPlcyLvl1GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.6	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl1GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl1Rate. Setting tHsmdaSchedulerPlcyLvl1GrpId to non-default value while tHsmdaSchedulerPlcyLvl1Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl1Rate being set to default. Setting tHsmdaSchedulerPlcyLvl1GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl1WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl2GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.9	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl2GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl2Rate. Setting tHsmdaSchedulerPlcyLvl2GrpId to non-default value while tHsmdaSchedulerPlcyLvl2Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl2Rate being set to default. Setting tHsmdaSchedulerPlcyLvl2GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl2WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl3GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.12	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl3GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl3Rate. Setting tHsmdaSchedulerPlcyLvl3GrpId to non-default value while tHsmdaSchedulerPlcyLvl3Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl3Rate being set to default. Setting tHsmdaSchedulerPlcyLvl3GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl3WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl4GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.15	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl4GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl4Rate. Setting tHsmdaSchedulerPlcyLvl4GrpId to non-default value while tHsmdaSchedulerPlcyLvl4Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl4Rate being set to default. Setting tHsmdaSchedulerPlcyLvl4GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl4WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl5GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.18	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl5GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl5Rate. Setting tHsmdaSchedulerPlcyLvl5GrpId to non-default value while tHsmdaSchedulerPlcyLvl5Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl5Rate being set to default. Setting tHsmdaSchedulerPlcyLvl5GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl5WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl6GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.21	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl6GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl6Rate. Setting tHsmdaSchedulerPlcyLvl6GrpId to non-default value while tHsmdaSchedulerPlcyLvl6Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl6Rate being set to default. Setting tHsmdaSchedulerPlcyLvl6GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl6WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl7GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.24	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl7GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl7Rate. Setting tHsmdaSchedulerPlcyLvl7GrpId to non-default value while tHsmdaSchedulerPlcyLvl7Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl7Rate being set to default. Setting tHsmdaSchedulerPlcyLvl7GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl7WgtInGrp being set to default.
THS tHsmdaSchedulerPlcyLvl8GrpId	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.27	THsmdaSchedulerPolicyGroupId	read-create	The value of tHsmdaSchedulerPlcyLvl8GrpId specifies the group this HSMDA scheduler policy level belongs to. If the value is '0', this level is not assigned to a scheduler policy group. This object may not be set simultaneously with tHsmdaSchedulerPlcyLvl8Rate. Setting tHsmdaSchedulerPlcyLvl8GrpId to non-default value while tHsmdaSchedulerPlcyLvl8Rate is non-default, results in the level being added to the group and tHsmdaSchedulerPlcyLvl8Rate being set to default. Setting tHsmdaSchedulerPlcyLvl8GrpId to default value results in the level being removed from any group and tHsmdaSchedulerPlcyLvl8WgtInGrp being set to default.
THsmdaWeight (8)
THS tHsmdaSchedulerPlcyLvl1WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.7	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl1WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl1GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl1WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl1GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl2WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.10	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl2WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl2GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl2WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl2GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl3WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.13	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl3WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl3GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl3WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl3GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl4WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.16	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl4WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl4GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl4WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl4GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl5WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.19	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl5WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl5GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl5WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl5GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl6WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.22	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl6WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl6GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl6WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl6GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl7WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.25	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl7WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl7GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl7WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl7GrpId is non-default.
THS tHsmdaSchedulerPlcyLvl8WgtInGrp	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.28	THsmdaWeight	read-create	The value of tHsmdaSchedulerPlcyLvl8WgtInGrp specifies the weight the HSMDA scheduler policy should apply to this policy level within the group it belongs to. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp will only be used if this policy level has been assigned to a group by setting tHsmdaSchedulerPlcyLvl8GrpId to a non-zero value. The value of tHsmdaSchedulerPlcyLvl8WgtInGrp is only allowed to be non-default when tHsmdaSchedulerPlcyLvl8GrpId is non-default.
THsmdaWeightClass (1)
THS tHsmdaWrrPolicyAggWeightAtClass	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.7	THsmdaWeightClass	read-create	The value of tHsmdaWrrPolicyAggWeightAtClass specifies the weight assigned to the group of queues specified by tHsmdaWrrPolicyIncludeQueues within the HSMDA scheduler.
THsmdaWrrWeight (2)
THS tNetworkEgrHsmdaQueueWrrWeight	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.4	THsmdaWrrWeight	read-write	The value of tNetworkEgrHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
THS tSapEgressHsmdaQueueWrrWeight	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.9	THsmdaWrrWeight	read-create	The value of tSapEgressHsmdaQueueWrrWeight specifies the weight with which this queue should parent into the HSMDA scheduler, provided it is not superseded by the Weighted Round Robin (WRR) policy. The weight of each queue determines how much bandwidth that queue gets out of the total rate for the scheduling class.
TimeStamp (144)
TIM tAdvCfgLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.3	TimeStamp	read-only	The value of tAdvCfgLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tAdvCfgPolicyTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.100	TimeStamp	read-only	The value of tAdvCfgPolicyTblLastChgd indicates the timestamp of last change to the tAdvCfgPolicyTable.
TIM tAtmTdpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.9	TimeStamp	read-only	tAtmTdpLastChanged maintains the timestamp of the last change made to a row in the Traffic Descriptor Profile Table.
TIM tAtmTdpTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.62	TimeStamp	read-only	tAtmTdpTableLastChanged maintains the timestamp of the last change made to the Traffic Descriptor Profile Table.
TIM tDSCPNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.1.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tDSCPNameTable.
TIM tDSCPNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.5	TimeStamp	read-only	The value of the object tDSCPNameTableLastChanged indicates the timestamp of last change to the DSCP Name Table.
TIM tFCNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.2.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tFCNameTable.
TIM tFCNameTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.10	TimeStamp	read-only	The value of the object tFCNameTableLastChanged indicates the timestamp of last change to the FC Name Table.
TIM tHsmdaPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.3	TimeStamp	read-only	The value of tHsmdaPoolLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tHsmdaPoolPlcyTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.71	TimeStamp	read-only	tHsmdaPoolPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Pool Policy Table.
TIM tHsmdaSchedPlcyGrpTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.70	TimeStamp	read-only	tHsmdaSchedPlcyGrpTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Group Table.
TIM tHsmdaSchedPlcyTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.69	TimeStamp	read-only	tHsmdaSchedPlcyTblLastChngd maintains the timestamp of the last change made to the HSMDA Scheduler Policy Table.
TIM tHsmdaSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.29	TimeStamp	read-only	The value of tHsmdaSchedulerPlcyLastChanged indicates the timestamp of last change to this row in tHsmdaSchedulerPlcyTable.
TIM tHsmdaSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.3	TimeStamp	read-only	The value of tHsmdaSlopeLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tHsmdaSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.72	TimeStamp	read-only	tHsmdaSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Hsmda Slope Policy Table.
TIM tHsmdaWrrPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.3	TimeStamp	read-only	The value of tHsmdaWrrPolicyLastChanged indicates the sysUpTime for the last change to this row.
TIM tHsmdaWrrPolicyTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.93	TimeStamp	read-only	The value of tHsmdaWrrPolicyTblLastChgd indicates the timestamp of last change to the tHsmdaWrrPolicyTable.
TIM tMcFrEgrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.5	TimeStamp	read-only	The value of tMcFrEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
TIM tMcFrEgrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.83	TimeStamp	read-only	The value of tMcFrEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrEgrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.3	TimeStamp	read-only	The value of tMcFrEgrProfLastChanged indicates the sysUpTime for the last change to this row.
TIM tMcFrEgrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.82	TimeStamp	read-only	The value of tMcFrEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrIngrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.3	TimeStamp	read-only	The value of tMcFrIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
TIM tMcFrIngrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.81	TimeStamp	read-only	The value of tMcFrIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcFrIngrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.3	TimeStamp	read-only	The value of tMcFrIngrProfTable indicates the sysUpTime for the last change to this row.
TIM tMcFrIngrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.80	TimeStamp	read-only	The value of tMcFrIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcFrIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppEgrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.5	TimeStamp	read-only	The value of tMcMlpppEgrClassLastChanged indicates the sysUpTime for the last change to this entry.
TIM tMcMlpppEgrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.78	TimeStamp	read-only	The value of tMcMlpppEgrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppEgrFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.3	TimeStamp	read-only	The value of tMcMlpppEgrFCLastChanged indicates the sysUpTime for the last change to this entry.
TIM tMcMlpppEgrFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.79	TimeStamp	read-only	The value of tMcMlpppEgrFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppEgrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.3	TimeStamp	read-only	The value of tMcMlpppEgrProfLastChanged indicates the sysUpTime for the last change to this row.
TIM tMcMlpppEgrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.77	TimeStamp	read-only	The value of tMcMlpppEgrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppEgrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppIngrClassLastChanged	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.3	TimeStamp	read-only	The value of tMcMlpppIngrClassLastChanged indicates the sysUpTime for the last change to this entry.
TIM tMcMlpppIngrClassTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.76	TimeStamp	read-only	The value of tMcMlpppIngrClassTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrClassTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMcMlpppIngrProfLastChanged	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.3	TimeStamp	read-only	The value of tMcMlpppIngrProfTable indicates the sysUpTime for the last change to this row.
TIM tMcMlpppIngrProfTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.75	TimeStamp	read-only	The value of tMcMlpppIngrProfTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tMcMlpppIngrProfTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tNamedPoolPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.3	TimeStamp	read-only	The value of tNamedPoolPolicyLastChanged indicates the sysUpTime when this row was last modified.
TIM tNamedPoolPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.73	TimeStamp	read-only	The value of tNamedPoolPolicyTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tNamedPoolPolicyTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tNetworkEgrDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.102	TimeStamp	read-only	The value of tNetworkEgrDSCPTableLastChanged indicates the timestamp of last change to the tNetworkEgressDSCPTable.
TIM tNetworkEgressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.3	TimeStamp	read-only	The value of tNetworkEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TIM tNetworkEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.8	TimeStamp	read-only	timestamp of last change to this row in tNetworkEgressFCTable.
TIM tNetworkEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.43	TimeStamp	read-only	tNetworkEgressFCTableLastChanged maintains the timestamp of the last change made to the Network Egress FC Table.
TIM tNetworkEgressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.3	TimeStamp	read-only	The value of tNetworkEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TIM tNetworkEgrHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.7	TimeStamp	read-only	The value of tNetworkEgrHsmdaQueueLastChanged indicates the sysUpTime for the last change to this row.
TIM tNetworkEgrHsmdaQueueTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.94	TimeStamp	read-only	The value of tNetworkEgrHsmdaQueueTblLastChgd indicates the timestamp of last change to this row in tNetworkEgrHsmdaQueueTable.
TIM tNetworkEgrPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.103	TimeStamp	read-only	The value of tNetworkEgrPrecTableLastChanged indicates the timestamp of last change to the tNetworkEgressPrecTable.
TIM tNetworkIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDot1pTable.
TIM tNetworkIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.44	TimeStamp	read-only	tNetworkIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Network Ingress Dot1p Table.
TIM tNetworkIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressDSCPTable.
TIM tNetworkIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.41	TimeStamp	read-only	tNetworkIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Network Ingress DSCP Mapping Table.
TIM tNetworkIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.2	TimeStamp	read-only	The value of tNetworkIngressFCLastChanged indicates the sysUpTime for the last change to this entry.
TIM tNetworkIngressFCTableLstChanged	1.3.6.1.4.1.6527.3.1.2.16.20.101	TimeStamp	read-only	The value of tNetworkIngressFCTableLstChanged indicates the timestamp of last change to the tNetworkIngressFCTable.
TIM tNetworkIngressLSPEXPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tNetworkIngressLSPEXPTable.
TIM tNetworkIngressLSPEXPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.42	TimeStamp	read-only	tNetworkIngressLSPEXPTableLastChanged maintains the timestamp of the last change made to the Network Ingress LSPEXP Table.
TIM tNetworkPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.10	TimeStamp	read-only	Timestamp of last change to this row in tNetworkPolicyTable.
TIM tNetworkPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.40	TimeStamp	read-only	tNetworkPolicyTableLastChanged maintains the timestamp of the last change made to the Network Policy Table.
TIM tNetworkQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.7	TimeStamp	read-only	timestamp of last change to this row in tNetworkQueueFCTable.
TIM tNetworkQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.52	TimeStamp	read-only	tNetworkQueueFCTableLastChanged maintains the timestamp of the last change made to the Network Queue FC Table.
TIM tNetworkQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.16	TimeStamp	read-only	The value of the object tNetworkQueueLastChanged indicates the timestamp of last change to this row in tNetworkQueueTable.
TIM tNetworkQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.8	TimeStamp	read-only
TIM tNetworkQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.50	TimeStamp	read-only	tNetworkQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Network Queue Policy Table.
TIM tNetworkQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.51	TimeStamp	read-only	tNetworkQueueTableLastChanged maintains the timestamp of the last change made to the Network Queue Table.
TIM tPortSchedulerPlcyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.4	TimeStamp	read-only	The value of tPortSchedulerPlcyLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TIM tPortSchPlcyGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.3	TimeStamp	read-only	The value of tPortSchPlcyGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TIM tPortSchPlcyGrpTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.91	TimeStamp	read-only	tPortSchPlcyGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyGrpTable.
TIM tPortSchPlcyLvlGrpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.1	TimeStamp	read-only	The value of tPortSchPlcyLvlGrpLastChanged indicates the value of sysUpTime at the time of the most recent management change to this row.
TIM tPortSchPlcyLvlGrpTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.92	TimeStamp	read-only	tPortSchPlcyLvlGrpTblLastChgd indicates the timestamp of last change to the tPortSchPlcyLvlGrpTable.
TIM tQ1NamedPoolLastChanged	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.4	TimeStamp	read-only	The value of tQ1NamedPoolLastChanged indicates the sysUpTime when this row was last modified.
TIM tQ1NamedPoolTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.74	TimeStamp	read-only	The value of tQ1NamedPoolTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQ1NamedPoolTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQosDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.1	TimeStamp	read-only	The value of the object tQosDomainLastChanged indicates the timestamp of last change to the QoS Domain.
TIM tQosEgrPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.3	TimeStamp	read-only	tQosEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIM tQosEgrPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.98	TimeStamp	read-only	tQosEgrPolicerTableLastChanged indicates the timestamp of last change to the tQosEgrPolicerTable.
TIM tQosEgrQGroupFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.8.1.3	TimeStamp	read-only	The value of tQosEgrQGroupFCLastChanged indicates the timestamp of last change to this row in tQosEgrQGroupFCTable.
TIM tQosEgrQGroupFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.90	TimeStamp	read-only	The value of tQosEgrQGroupFCTableLastChanged indicates the sysUpTime at the time of the last modification of an entry in the tQosEgrQGroupFCTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tQosEgrQGroupLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.3	TimeStamp	read-only	tQosEgrQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TIM tQosEgrQGroupTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.8	TimeStamp	read-only	tQosEgrQGroupTableLastChanged indicates the timestamp of last change to the tQosEgrQGroupTable.
TIM tQosEgrQTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.9	TimeStamp	read-only	tQosEgrQTableLastChanged indicates the timestamp of last change to the tQosEgrQueueTable.
TIM tQosEgrQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.18	TimeStamp	read-only	The value of tQosEgrQueueLastChanged indicates the timestamp of last change to this row in tQosEgrQueueTable.
TIM tQosIngPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.3	TimeStamp	read-only	tQosIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIM tQosIngPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.97	TimeStamp	read-only	tQosIngPolicerTableLastChanged indicates the timestamp of last change to the tQosIngPolicerTable.
TIM tQosIngQGroupLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.3	TimeStamp	read-only	tQosIngQGroupLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TIM tQosIngQGroupTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.6	TimeStamp	read-only	tQosIngQGroupTableLastChanged indicates the timestamp of last change to the tQosIngQGroupTable.
TIM tQosIngQTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.7	TimeStamp	read-only	tQosIngQTableLastChanged indicates the timestamp of last change to the tQosIngQueueTable.
TIM tQosIngQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.17	TimeStamp	read-only	tQosIngQueueLastChanged specifies the timestamp of last change to this row in tQosIngQueueTable.
TIM tQosPolicerArbiterLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.4	TimeStamp	read-only	The value of tQosPolicerArbiterLastChgd indicates the timestamp of last change to this row in tQosPolicerArbiterTable.
TIM tQosPolicerArbiterTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.89	TimeStamp	read-only	tQosPolicerArbiterTblLastChgd indicates the timestamp of last change to the tQosPolicerArbiterTable.
TIM tQosPolicerCtrlPolLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.3	TimeStamp	read-only	The value of tQosPolicerCtrlPolLastChgd indicates the timestamp of last change to this row in tQosPolicerCtrlPolTable.
TIM tQosPolicerCtrlPolTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.87	TimeStamp	read-only	tQosPolicerCtrlPolTblLastChgd indicates the timestamp of last change to the tQosPolicerCtrlPolTable.
TIM tQosPolicerLevelLastChgd	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.2	TimeStamp	read-only	The value of tQosPolicerLevelLastChgd indicates the timestamp of last change to this row in tQosPolicerLevelTable.
TIM tQosPolicerLevelTblLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.88	TimeStamp	read-only	tQosPolicerLevelTblLastChgd indicates the timestamp of last change to the tQosPolicerLevelTable.
TIM tSapEgressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.3	TimeStamp	read-only	The value of tSapEgressDot1pLastChanged indicates the sysUpTime at the time of the last modification of this entry.
TIM tSapEgressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.99	TimeStamp	read-only	tSapEgressDot1pTableLastChanged indicates the timestamp of last change to the tSapEgressDot1pTable.
TIM tSapEgressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.3	TimeStamp	read-only	The value of tSapEgressDSCPLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TIM tSapEgressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressFCTable.
TIM tSapEgressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.32	TimeStamp	read-only	tSapEgressFCTableLastChanged maintains the timestamp of the last change made to the Sap Egress FC Table.
TIM tSapEgressHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.8	TimeStamp	read-only	The value of tSapEgressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapEgressHsmdaQueueTable.
TIM tSapEgressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapEgressTable.
TIM tSapEgressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.3	TimeStamp	read-only	The value of tSapEgressPrecLastChanged indicates the sysUpTime at the time of the most recent management-initiated change to this table row.
TIM tSapEgressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.18	TimeStamp	read-only	timestamp of last change to this row in tSapEgressQueueTable.
TIM tSapEgressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.31	TimeStamp	read-only	tSapEgressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Egress Queue Table.
TIM tSapEgressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.30	TimeStamp	read-only	tSapEgressTableLastChanged maintains the timestamp of the last change made to the Sap Egress Policy Table.
TIM tSapEgrHsmdaQueueTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.68	TimeStamp	read-only	tSapEgrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Egress HSMDA Queue Table.
TIM tSapEgrIPCritLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.4	TimeStamp	read-only	The value of tSapEgrIPCritLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapEgrPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.3	TimeStamp	read-only	tSapEgrPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIM tSapEgrPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.86	TimeStamp	read-only	tSapEgrPolicerTableLastChanged indicates the timestamp of last change to the tSapEgrPolicerTable.
TIM tSapEgrPolicyNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.3	TimeStamp	read-only	The value of tSapEgrPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapEgrPolicyNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.96	TimeStamp	read-only	The value of tSapEgrPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapEgrPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapIngPolicerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.3	TimeStamp	read-only	tSapIngPolicerLastChanged indicates the value of sysUpTime when the entry was last modified.
TIM tSapIngPolicerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.85	TimeStamp	read-only	tSapIngPolicerTableLastChanged indicates the timestamp of last change to the tSapIngPolicerTable.
TIM tSapIngPolicyNameLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.3	TimeStamp	read-only	The value of tSapIngPolicyNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapIngPolicyNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.16.20.95	TimeStamp	read-only	The value of tSapIngPolicyNameTableLastChgd indicates the sysUpTime at the time of the last modification of tSapIngPolicyNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapIngressDot1pLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDot1pTable.
TIM tSapIngressDot1pTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.23	TimeStamp	read-only	tSapIngressDot1pTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Dot1p Table.
TIM tSapIngressDSCPLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressDSCPTable.
TIM tSapIngressDSCPTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.22	TimeStamp	read-only	tSapIngressDSCPTableLastChanged maintains the timestamp of the last change made to the Sap Ingress DSCP Mapping Table.
TIM tSapIngressFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.7	TimeStamp	read-only	tSapIngressFCLastChanged indicates the value of sysUpTime when the forwarding class entry was last modified.
TIM tSapIngressFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.26	TimeStamp	read-only	tSapIngressFCTableLastChanged maintains the timestamp of the last change made to the Sap Ingress FC Table.
TIM tSapIngressHsmdaQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.3	TimeStamp	read-only	The value of tSapIngressHsmdaQueueLastChanged indicates the timestamp of last change to this row in tSapIngressHsmdaQueueTable.
TIM tSapIngressIPCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.20	TimeStamp	read-only	timestamp of last change to this row in tSapIngressIPCriteriaTable.
TIM tSapIngressIPCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.24	TimeStamp	read-only	tSapIngressIPCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress IP Criteria Table.
TIM tSapIngressIPv6CriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.20	TimeStamp	read-only	The value of the object indicates timestamp of last change to this row in tSapIngressIPv6CriteriaTable.
TIM tSapIngressIPv6CriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.66	TimeStamp	read-only	The value of the object tSapIngressIPv6CriteriaTableLastChanged indicates the timestamp of the last change made to the Sap Ingress IPv6 Criteria Table.
TIM tSapIngressLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.8	TimeStamp	read-only	timestamp of last change to this row in tSapIngressTable.
TIM tSapIngressLspExpLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.3	TimeStamp	read-only	The value of tSapIngressLspExpLastChanged indicates the timestamp of last change to this row in tSapIngressLspExpTable.
TIM tSapIngressLspExpTableLastChange	1.3.6.1.4.1.6527.3.1.2.16.20.84	TimeStamp	read-only	The value of tSapIngressLspExpTableLastChange indicates the sysUpTime at the time of the last modification of an entry in the tSapIngressLspExpTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tSapIngressMacCriteriaLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.21	TimeStamp	read-only	timestamp of last change to this row in tSapIngressMacCriteriaTable.
TIM tSapIngressMacCriteriaTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.25	TimeStamp	read-only	tSapIngressMacCriteriaTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Mac Criteria Table.
TIM tSapIngressPrecLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.5	TimeStamp	read-only	timestamp of last change to this row in tSapIngressPrecTable.
TIM tSapIngressPrecTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.27	TimeStamp	read-only	tSapIngressPrecTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Precedence Table.
TIM tSapIngressQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.19	TimeStamp	read-only	timestamp of last change to this row in tSapIngressQueueTable.
TIM tSapIngressQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.21	TimeStamp	read-only	tSapIngressQueueTableLastChanged maintains the timestamp of the last change made to the Sap Ingress Queue Table.
TIM tSapIngressTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.20	TimeStamp	read-only	The value of the object tSapIngressTableLastChanged indicates the timestamp of last change to the Sap Ingress Policy Table.
TIM tSapIngrHsmdaQueueTblLastChngd	1.3.6.1.4.1.6527.3.1.2.16.20.67	TimeStamp	read-only	tSapIngrHsmdaQueueTblLastChngd maintains the timestamp of the last change made to the Sap Ingress HSMDA Queue Table. This object is obsoleted in 10.0 Release.
TIM tSchedulerPolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.4	TimeStamp	read-only	timestamp of last change to this row in tSchedulerPolicyTable.
TIM tSchedulerPolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.60	TimeStamp	read-only	tSchedulerPolicyTableLastChanged maintains the timestamp of the last change made to the Scheduler Policy Table.
TIM tSharedQueueFCLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.3	TimeStamp	read-only	tSharedQueueFCLastChanged indicates the value of sysUpTime when the forwarding class to queue mapping entry was last modified.
TIM tSharedQueueFCTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.65	TimeStamp	read-only	tSharedQueueFCTableLastChanged maintains the timestamp of the last change made to the Queue FC Table.
TIM tSharedQueueLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.3	TimeStamp	read-only	tSharedQueueLastChanged indicates the value of sysUpTime when the queue entry was last modified.
TIM tSharedQueuePolicyLastChanged	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.3	TimeStamp	read-only	tSharedQueuePolicyLastChanged indicates the value of sysUpTime when the queue policy entry was last modified.
TIM tSharedQueuePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.63	TimeStamp	read-only	tSharedQueuePolicyTableLastChanged maintains the timestamp of the last change made to the Queue Policy Table.
TIM tSharedQueueTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.64	TimeStamp	read-only	tSharedQueueTableLastChanged maintains the timestamp of the last change made to the Queue Table.
TIM tSlopeLastChanged	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.13	TimeStamp	read-only	Timestamp of when this entry was last changed.
TIM tSlopePolicyTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.55	TimeStamp	read-only	tSlopePolicyTableLastChanged maintains the timestamp of the last change made to the Slope Policy Table.
TIM tVirtualSchedulerLastChanged	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.13	TimeStamp	read-only	The value of the object tVirtualSchedulerLastChanged indicates the timestamp of last change to this row in tVirtualSchedulerTable.
TIM tVirtualSchedulerTableLastChanged	1.3.6.1.4.1.6527.3.1.2.16.20.61	TimeStamp	read-only	tVirtualSchedulerTableLastChanged maintains the timestamp of the last change made to the Virtual Scheduler Table.
TIngPolicerId (2)
TIN tQosIngPolicerId	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.1	TIngPolicerId	not-accessible	tQosIngPolicerId defines the Ingress Queue Group Policer identifier. It identifies an ingress queue group policer in the managed system.
TIN tSapIngPolicerId	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.1	TIngPolicerId	not-accessible	tSapIngPolicerId defines the SAP Ingress Policer identifier. It identifies an sap-ingress policer in the managed system.
TIngPolicerIdOrNone (6)
TIN tNetworkIngressFCMultiCastPlcr	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.3	TIngPolicerIdOrNone	read-write	The value of tNetworkIngressFCMultiCastPlcr specifies the policer to be used for multicast traffic for this forwarding-class.
TIN tNetworkIngressFCUniCastPlcr	1.3.6.1.4.1.6527.3.1.2.16.5.8.1.4	TIngPolicerIdOrNone	read-write	The value of tNetworkIngressFCUniCastPlcr specifies the policer to be used for unicast traffic for this forwarding-class.
TIN tSapIngressFCBCastPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.25	TIngPolicerIdOrNone	read-create	tSapIngressFCBCastPolicer specifies the policer ID to be used for broadcast traffic in this forwarding class.
TIN tSapIngressFCMCastPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.24	TIngPolicerIdOrNone	read-create	tSapIngressFCMCastPolicer specifies the policer ID to be used for multicast in this forwarding class.
TIN tSapIngressFCPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.23	TIngPolicerIdOrNone	read-create	tSapIngressFCPolicer specifies the policer ID to be used for the normal traffic in this forwarding class.
TIN tSapIngressFCUnknownPolicer	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.26	TIngPolicerIdOrNone	read-create	tSapIngressFCUnknownPolicer specifies the policer ID to be used for unknown traffic in this forwarding class.
TIngressHsmdaCounterIdOrZero (6)
NUM tSapIngressDefFCHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.10	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDefFCHsmdaCntrOvr specifies the counter to use for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
NUM tSapIngressDot1pHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDot1pHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
NUM tSapIngressDSCPHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressDSCPHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
NUM tSapIngressIPCritHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.21	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressIPCritHsmdaCntrOvr specifies the Hsmda counter to use for matching packets. This value will be ignored when the sap-ingress policy specified by tSapIngressIndex, is applied to a SAP on a non-Hsmda MDA type. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
NUM tSapIngressLspExpHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
NUM tSapIngressPrecHsmdaCntrOvr	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.6	TIngressHsmdaCounterIdOrZero	read-create	The value of the object tSapIngressPrecHsmdaCntrOvr specifies the counter to use for all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. A value of zero implies that the default counters should be used. This object is obsoleted in 10.0 Release.
TIngressHsmdaPerPacketOffset (1)
TIN tSapIngressHsmdaPacketOffset	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.9	TIngressHsmdaPerPacketOffset	read-create	The value of tSapIngressHsmdaPacketOffset specifies the value, in bytes, of the adjustment to make to the size of each packet for HSMDA queue accounting. This object is obsoleted in 10.0 Release.
TIngressHsmdaQueueId (4)
TIN tSapIngressFCHsmdaBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.17	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaBCastQueue specifies the broadcast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressFCHsmdaMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.16	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaMCastQueue specifies the multicast queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressFCHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.15	TIngressHsmdaQueueId	read-create	The value of the object tSapIngressFCHsmdaQueue specifies the HSMDA queue to use for packets in this forwarding class. This mapping will be used when the SAP is on a HSMDA MDA. A value of zero implies that the default queues should be used. This object is obsoleted in 10.0 Release.
TIN tSapIngressHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.1	TIngressHsmdaQueueId	not-accessible	The HSMDA queue ID is used as the secondary index to the table entry.
TIngressQueueId (6)
TIN tQosIngQueue	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.1	TIngressQueueId	not-accessible	tQosIngQueue specifies the queue ID which is used as the secondary index to the table entry.
TIN tSapIngressFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.5	TIngressQueueId	read-create	The specific broadcast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpBCast implies that the default queues should be used.
TIN tSapIngressFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.4	TIngressQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpMCast implies that the default queues should be used.
TIN tSapIngressFCQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.3	TIngressQueueId	read-create	The specific queue to be used for packets in this forwarding class. Default value for this object along with default value for tSapIngressFCQGrp implies that the default queues should be used.
TIN tSapIngressFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.6	TIngressQueueId	read-create	The specific unknown destination queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant. Default value for this object along with default value for tSapIngressFCQGrpUnknown implies that the default queues should be used.
TIN tSapIngressQueue	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.1	TIngressQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
TIpProtocol (3)
TIP tSapEgrIPCritProtocol	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.13	TIpProtocol	read-create	The value of tSapEgrIPCritProtocol specifies the IP protocol or IPv6 next-header to match. The value '-1' is used to disable matching by IP protocol or IPv6 next-header. When this value specifies an IPv6 next-header, since the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
TIP tSapIngressIPCriteriaProtocol	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.10	TIpProtocol	read-create	IP protocol to match. use -1 to disable matching by IP protocol.
TIP tSapIngressIPv6CriteriaNextHeader	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.10	TIpProtocol	read-create	The value of the object tSapIngressIPv6CriteriaNextHeader specifies the Next Header to match. use -1 to disable matching by Next Header. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
TItemDescription (33)
TIT tAdvCfgDescription	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.4	TItemDescription	read-create	The value of tAdvCfgDescription specifies the description of this advanced configuration policy.
TIT tAtmTdpDescription	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.8	TItemDescription	read-create	The value of tAtmTdpDescription specifies an ASCII string used to describe the ATM traffic descriptor.
TIT tHsmdaPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.4	TItemDescription	read-create	The value of tHsmdaPoolDescription specifies the description of this HSMDA pool policy.
TIT tHsmdaSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.3	TItemDescription	read-create	The value of tHsmdaSchedulerPlcyDescription specifies the description of this HSMDA scheduling policy.
TIT tHsmdaSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.4	TItemDescription	read-create	The value of tHsmdaSlopeDescription specifies the description of this HSMDA slope policy.
TIT tHsmdaWrrPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.4	TItemDescription	read-create	The value of tHsmdaWrrPolicyDescription specifies the description of the Weighted Round Robin (WRR) policy on this HSMDA queue.
TIT tMcFrEgrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.2	TItemDescription	read-create	The value of tMcFrEgrProfDescription holds the description for this profile.
TIT tMcFrIngrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.2	TItemDescription	read-create	The value of tMcFrIngrProfDescription holds the description for this profile.
TIT tMcMlpppEgrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.2	TItemDescription	read-create	The value of tMcMlpppEgrProfDescription holds the description for this profile.
TIT tMcMlpppIngrProfDescription	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.2	TItemDescription	read-create	The value of tMcMlpppIngrProfDescription holds the description for this profile.
TIT tNamedPoolPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.4	TItemDescription	read-create	The value of tNamedPoolPolicyDescription specifies the description for a specific named pool policy.
TIT tNetworkPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.6	TItemDescription	read-create	tNetworkPolicyDescription holds the description for this policy.
TIT tNetworkQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.3	TItemDescription	read-create
TIT tPortSchedulerPlcyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.3	TItemDescription	read-create	The value of tPortSchedulerPlcyDescription specifies the description of this port scheduler.
TIT tQ1NamedPoolDescription	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.5	TItemDescription	read-create	The value of tQ1NamedPoolDescription specifies the description for a specific Q1 named pool.
TIT tQosEgrPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.4	TItemDescription	read-create	tQosEgrPolicerDescr specifies the description of the policer.
TIT tQosEgrQGroupDescr	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.4	TItemDescription	read-create	tQosEgrQGroupDescr specifies the description of the queue-group.
TIT tQosIngPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.4	TItemDescription	read-create	tQosIngPolicerDescr specifies the description of the policer.
TIT tQosIngQGroupDescr	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.4	TItemDescription	read-create	tQosIngQGroupDescr specifies the description of the queue-group.
TIT tQosPolicerArbiterDescr	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.5	TItemDescription	read-create	The value of tQosPolicerArbiterDescr specifies the description for the policer control policy arbiter for the given tier.
TIT tQosPolicerCtrlPolDescr	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.4	TItemDescription	read-create	The value of tQosPolicerCtrlPolDescr specifies the description for the policer control policy.
TIT tSapEgressDescription	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.4	TItemDescription	read-create	user-supplied description of this sap-egress policy.
TIT tSapEgrIPCritDescription	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.5	TItemDescription	read-create	The value of tSapEgrIPCritDescription specifies a description of the sap-egress IP or IPv6 criteria entry.
TIT tSapEgrPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.4	TItemDescription	read-create	tSapEgrPolicerDescr specifies the description of the policer.
TIT tSapIngPolicerDescr	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.4	TItemDescription	read-create	tSapIngPolicerDescr specifies the description of the policer.
TIT tSapIngressDescription	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.4	TItemDescription	read-create	user-provided description of the policy.
TIT tSapIngressIPCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.3	TItemDescription	read-create	description of this IP criteria entry.
TIT tSapIngressIPv6CriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.3	TItemDescription	read-create	The value of the object tSapIngressIPv6CriteriaDescription specifies an optional user provided description of this IPv6 criteria entry.
TIT tSapIngressMacCriteriaDescription	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.3	TItemDescription	read-create
TIT tSchedulerPolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.3	TItemDescription	read-create	Description for the scheduler policy
TIT tSharedQueuePolicyDescription	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.4	TItemDescription	read-create	tSharedQueuePolicyDescription specifies the user provided description string for this queue policy entry. It can consist of only the printable, seven-bit ASCII characters.
TIT tSlopeDescription	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.3	TItemDescription	read-create	User-provided description of the policy.
TIT tVirtualSchedulerDescription	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.4	TItemDescription	read-create	Description for the scheduler policy
TItemMatch (2)
TIT tSapEgrIPCritFragment	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.21	TItemMatch	read-create	The value of tSapEgrIPCritFragment specifies fragmented packet matching. If the value is 'true', only fragmented packets match. If the value is 'false', only non-fragmented packets match. If the value is 'off', all packets match regardless. This field is only relevant for ipv4. An inconsistentValue error is returned when the value of tSapEgrIPCritFragment is not 'off' and the value of tSapEgrIPCritAddrType is not 'ipv4'.
TIT tSapIngressIPCriteriaFragment	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.19	TItemMatch	read-create	matches when the packet is a fragment (true) or when the packet is not a fragment (false) or matches all packets fragmented or not (off).
TItemScope (3)
TIT tNetworkPolicyScope	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.5	TItemScope	read-create
TIT tSapEgressScope	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.3	TItemScope	read-create	scope of the sap-egress policy.
TIT tSapIngressScope	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.3	TItemScope	read-create	Scope of the policy. If the scope is 'exclusive', it can only be instantiated once whereas it could have multiple instances if defined as 'exclusive'.
TLevel (18)
TLE tNetworkQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.5	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TLE tNetworkQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.18	TLevel	read-create	The value of the object tNetworkQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tPortSchedulerPlcyOrphanLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.22	TLevel	read-create	The value of tPortSchedulerPlcyOrphanLvl specifies the port priority of orphaned queues and schedulers that are above-cir.
TLE tQosEgrPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.8	TLevel	read-create	tQosEgrPolicerLevel specifies the level of priority while feeding the parent.
TLE tQosEgrQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.4	TLevel	read-create	The value of tQosEgrQueueLevel specifies the level of priority while feeding the parent.
TLE tQosEgrQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.20	TLevel	read-create	The value of the object tQosEgrQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tQosIngPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.8	TLevel	read-create	tQosIngPolicerLevel specifies the level of priority while feeding the parent.
TLE tQosIngQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.4	TLevel	read-create	tQosIngQueueLevel specifies the level of priority while feeding the parent.
TLE tQosPolicerArbiterLevel	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.8	TLevel	read-create	tQosPolicerArbiterLevel specifies the level of priority while feeding the parent.
TLE tQosPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.1	TLevel	not-accessible	The value of tQosPolicerLevel identifies the level of the policer control policy defined by tQosPolicerCtrlPolName.
TLE tSapEgressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TLE tSapEgressQueuePortLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.20	TLevel	read-create	The value of the object tSapEgressQueuePortLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLE tSapEgrPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.8	TLevel	read-create	tSapEgrPolicerLevel specifies the level of priority while feeding the parent.
TLE tSapIngPolicerLevel	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.8	TLevel	read-create	tSapIngPolicerLevel specifies the level of priority while feeding the parent.
TLE tSapIngressQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.4	TLevel	read-create	This specifies the level of priority while feeding to the parent.
TLE tSharedQueueLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.6	TLevel	read-create	tSharedQueueLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is exceeding the committed rate.
TLE tVirtualSchedulerLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.6	TLevel	read-create	This specifies the level of priority while feeding the parent.
TLE tVirtualSchedulerPortLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.15	TLevel	read-create	The value of the object tVirtualSchedulerPortLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TLevelOrDefault (12)
TLE tNetworkQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.7	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TLE tNetworkQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.20	TLevelOrDefault	read-create	The value of the object tNetworkQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tPortSchedulerPlcyOrphanCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.24	TLevelOrDefault	read-create	The value of tPortSchedulerPlcyOrphanCIRLvl specifies the port priority of orphaned queues and schedulers that are within-cir.
TLE tQosEgrQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.6	TLevelOrDefault	read-create	The value of tQosEgrQueueCIRLevel specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TLE tQosEgrQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.22	TLevelOrDefault	read-create	The value of the object tQosEgrQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tQosIngQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.6	TLevelOrDefault	read-create	tQosIngQueueCIRLevel specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TLE tSapEgressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TLE tSapEgressQueuePortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.22	TLevelOrDefault	read-create	The value of the object tSapEgressQueuePortCIRLvl specifies the port priority this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLE tSapIngressQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.6	TLevelOrDefault	read-create	This specifies the level of priority while feeding to the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TLE tSharedQueueCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.8	TLevelOrDefault	read-create	tSharedQueueCIRLevel specifies the level of priority to be used by the parent entity to compute the priority of this queue when the traffic is conforming to the committed rate. The level '0' means treat all offered load for this queue same as the load which is exceeding the committed rate.
TLE tVirtualSchedulerCIRLevel	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.8	TLevelOrDefault	read-create	This specifies the level of priority while feeding the parent. The level '0' means treat all offered load for this queue as for the above CIR traffic.
TLE tVirtualSchedulerPortCIRLvl	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.17	TLevelOrDefault	read-create	The value of the object tVirtualSchedulerPortCIRLvl specifies the port priority this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TLNamedItemOrEmpty (2)
TLN tSapEgressPolicyName	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.10	TLNamedItemOrEmpty	read-create	The value of tSapEgressPolicyName specifies the name to associate with this policy.
TLN tSapIngressPolicyName	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.12	TLNamedItemOrEmpty	read-create	The value of tSapIngressPolicyName specifies the name to associate with this policy.
TLspExpValue (4)
TLS tNetworkEgressFCLspExpInProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.4	TLspExpValue	read-write	the lsp-exp value to use for in-profile traffic.
TLS tNetworkEgressFCLspExpOutProfile	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.5	TLspExpValue	read-write	the lsp-exp value to use for out-of-profile traffic.
TLS tNetworkIngressLSPEXP	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.1	TLspExpValue	not-accessible
TLS tSapIngressLspExpValue	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.1	TLspExpValue	not-accessible	The value of the object tSapIngressLspExpValue specifies the value for which the mapping is done.
TMacFilterType (1)
TMA tSapIngressMacCritType	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.11	TMacFilterType	read-create	tSapIngressMacCritType specifies which type of entries this mac filter can contain. If tSapIngressMacCritType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type vid(3) or isid(2). tSapIngressMacCritType 'isid(2)' is not supported here. If tSapIngressMacCritType is set to vid(3) the only accepted match criteria for the filter entries are: - tSapIngressMacCritInnerTagValue - tSapIngressMacCritInnerTagMask - tSapIngressMacCritOuterTagValue - tSapIngressMacCritOuterTagMask tSapIngressMacCritType can only be changed if the filter has no entries. The value will be set to 'normal(1)' if IP or IPV6 criteria are added to the this SAP ingress QoS policy. Any change attempt in this case will be silently discarded.
TMatchCriteria (2)
TMA tSapEgressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.7	TMatchCriteria	read-only	The value of tSapEgressMatchCriteria indicates which type of match criteria the policy should use. When tSapEgressMatchCriteria has a value of 'ip', the sap-egress policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. The value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. The value of tSapEgressMatchCriteria is set to 'none' when the last criteria table entry is removed.
TMA tSapIngressMatchCriteria	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.7	TMatchCriteria	read-only	indicates which type of match criteria the policy should use. when set to ip(1), the policy looks for match entries in tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable. When set to mac(2), the policy looks for match entries in tSapIngressMacCriteriaTable. the value of tSapIngressMatchCriteria is set when the first match criteria table entry is created. the value is set to none(3) when the last criteria table entry is removed. when tSapIngressMatchCriteria is set to ip(1), no tSapIngressMacCriteriaTable entries can be created. when set to mac(2), no tSapIngressIPCriteriaTable or tSapIngressIPv6CriteriaTable entries can be created.
TMaxDecRate (1)
TMA tAdvCfgMaxDecRate	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.10	TMaxDecRate	read-create	The value of tAdvCfgMaxDecRate specifies the explicit number of kilobits-per-second that should be used as the child's offered rate decrement limit value.
TMcFrQoSProfileId (2)
TMC tMcFrEgrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.26.1.1.1	TMcFrQoSProfileId	not-accessible	The value of tMcFrEgrProfIndex specifies a specific multi-class egress profile.
TMC tMcFrIngrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.25.1.1.1	TMcFrQoSProfileId	not-accessible	The value of tMcFrIngrProfIndex specifies a specific multi-class ingress profile.
TMlpppQoSProfileId (2)
TML tMcMlpppEgrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.24.1.1.1	TMlpppQoSProfileId	not-accessible	The value of tMcMlpppEgrProfIndex specifies a specific multi-class egress profile.
TML tMcMlpppIngrProfIndex	1.3.6.1.4.1.6527.3.1.2.16.23.1.1.1	TMlpppQoSProfileId	not-accessible	The value of tMcMlpppIngrProfIndex specifies a specific multi-class ingress profile.
TmnxEgrPolicerStatMode (2)
TMN tQosEgrPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.17	TmnxEgrPolicerStatMode	read-create	tQosEgrPolicerStatMode specifies the mode of statistics collected by this policer.
TMN tSapEgrPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.12	TmnxEgrPolicerStatMode	read-create	tSapEgrPolicerStatMode specifies the mode of statistics collected by this policer.
TmnxEnabledDisabled (2)
TMN tHsmdaSlopeHiAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.6	TmnxEnabledDisabled	read-create	The value of tHsmdaSlopeHiAdminStatus specifies the admin state for the high priority RED slope. If the tHsmdaSlopeHiAdminStatus is set to 'disabled', the RED slope is inactive.
TMN tHsmdaSlopeLoAdminStatus	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.10	TmnxEnabledDisabled	read-create	The value of tHsmdaSlopeLoAdminStatus specifies the admin state for the low priority RED slope. If the tHsmdaSlopeLoAdminStatus is set to 'disabled', the RED slope is inactive.
TmnxIngPolicerStatMode (2)
TMN tQosIngPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.17	TmnxIngPolicerStatMode	read-create	tQosIngPolicerStatMode specifies the mode of statistics collected by this policer.
TMN tSapIngPolicerStatMode	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.12	TmnxIngPolicerStatMode	read-create	tSapIngPolicerStatMode specifies the mode of statistics collected by this policer.
TmnxMcFrClassIndex (2)
TMN tMcFrEgrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.1	TmnxMcFrClassIndex	not-accessible	The value of tMcFrEgrClassIndex specifies a specific frame-relay egress class per multi-class frame-relay egress profile.
TMN tMcFrIngrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.1	TmnxMcFrClassIndex	not-accessible	The value of tMcFrIngrClassIndex specifies a specific frame-relay ingress class per multi-class frame-relay ingress profile.
TmnxMcMlpppClassIndex (2)
TMN tMcMlpppEgrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.1	TmnxMcMlpppClassIndex	not-accessible	The value of tMcMlpppEgrClassIndex specifies a specific mlppp egress class per multi-class mlppp egress profile.
TMN tMcMlpppIngrClassIndex	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.1	TmnxMcMlpppClassIndex	not-accessible	The value of tMcMlpppIngrClassIndex specifies a specific mlppp ingress class per multi-class mlppp ingress profile.
TmnxSlopeMap (4)
TMN tQosEgrPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.22	TmnxSlopeMap	read-create	The value of tQosEgrPolicerSlopeMap specifies the slope map to be used with this policer.
TMN tQosIngPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.21	TmnxSlopeMap	read-create	The value of tQosIngPolicerSlopeMap specifies the slope map to be used with this policer.
TMN tSapEgrPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.23	TmnxSlopeMap	read-create	The value of tSapEgrPolicerSlopeMap specifies the slope map to be used with this policer.
TMN tSapIngPolicerSlopeMap	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.23	TmnxSlopeMap	read-create	The value of tSapIngPolicerSlopeMap specifies the slope map to be used with this policer.
TNamedItem (26)
TNA tAdvCfgPolicyName	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.1	TNamedItem	not-accessible	The value of tAdvCfgPolicyName specifies the name of the advanced configuration policy.
TNA tHsmdaPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.1	TNamedItem	not-accessible	The value of tHsmdaPoolPolicyName specifies the name of the HSMDA pool policy.
TNA tHsmdaSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.4.1.1	TNamedItem	not-accessible	The value of tHsmdaSchedulerPlcyName specifies the name of the HSMDA scheduler policy.
TNA tHsmdaSlopePolicyName	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.1	TNamedItem	not-accessible	The value of tHsmdaSlopePolicyName specifies the name of the HSMDA slope policy.
TNA tHsmdaWrrPolicyName	1.3.6.1.4.1.6527.3.1.2.16.28.1.1.1	TNamedItem	not-accessible	The value of tHsmdaWrrPolicyName specifies the name of the Weighted Round Robin (WRR) policy associated with this HSDMA queue.
TNA tNamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.1	TNamedItem	not-accessible	The value of tNamedPoolPolicyName indicates the name of Named pool policy.
TNA tNetworkEgrHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.6	TNamedItem	read-write	The value of tNetworkEgrHsmdaQueueSlopePolicy specifies the slope policy on this network egress HSMDA queue. The slope policy defines the WRED slope behavior for this queue.
TNA tNetworkQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.1	TNamedItem	not-accessible
TNA tPortSchedulerPlcyName	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.1	TNamedItem	not-accessible	The value of tPortSchedulerPlcyName specifies the name of the port scheduler.
TNA tPortSchPlcyGrpName	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.1	TNamedItem	not-accessible	The value of tPortSchPlcyGrpName specifies the name of the port scheduler group.
TNA tQ1NamedPoolName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.2	TNamedItem	not-accessible	The value of tQ1NamedPoolName indicates the name of the existing pool within the policy.
TNA tQ1NamedPoolPolicyName	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.1	TNamedItem	not-accessible	The value of tQ1NamedPoolPolicyName indicates the name of the existing Q1 named pool policy.
TNA tQosEgrQGroupName	1.3.6.1.4.1.6527.3.1.2.16.7.6.1.1	TNamedItem	not-accessible	tQosEgrQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
TNA tQosEgrQueueXPWredQSlope	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.26	TNamedItem	read-create	The value of tQosEgrQueueXPWredQSlope specifies the name of the slope-policy to be applied for QOS egress queue. When tQosEgrQueueXPWredQ has the value 'false', an 'inconsistentValue' error is returned if an attempt is made to set this object to a value other than 'default'.
TNA tQosIngQGroupName	1.3.6.1.4.1.6527.3.1.2.16.7.4.1.1	TNamedItem	not-accessible	tQosIngQGroupName defines the Ingress Queue Group name. It uniquely identifies an ingress queue group in the managed system.
TNA tQosPolicerArbiterName	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.2	TNamedItem	not-accessible	The value of tQosPolicerArbiterName identifies the name of the policer control policy arbiter.
TNA tQosPolicerCtrlPolName	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.1	TNamedItem	not-accessible	The value of tQosPolicerCtrlPolName identifies the name of the policer control policy.
TNA tSapEgressHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.4.4.1.7	TNamedItem	read-create	The value of tSapEgressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
TNA tSapEgressQueueXPWredQSlope	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.27	TNamedItem	read-create	The value of tSapEgressQueueXPWredQSlope specifies the name of the slope-policy to be applied for SAP egress queue. An 'inconsistentValue' error is returned when this object is set to a non-default value when tSapEgressQueueXPWredQ is set to 'false'.
TNA tSapIngressDefaultFC	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.5	TNamedItem	read-create	tSapIngressDefaultFC specifies the forwarding class or the sub forwarding class which should be used for all traffic that does not match a specific classification specified in this SAP ingress QoS policy. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. If not specified explicitly, all traffic will be classified as best-effort 'be'.
TNA tSapIngressFCName	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.1	TNamedItem	not-accessible	tSapIngressFCName specifies the forwarding class or the sub forwarding class for which this mapping is defined. A sub forwarding class mapping can also be configured. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] A sub forwarding class mapping should exist in this table if any explicit match criteria in this SAP ingress QoS policy try to use it. However, it is not the same for the base forwarding classes.
TNA tSapIngressHsmdaQueueSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.8	TNamedItem	read-create	The value of tSapIngressHsmdaQueueSlopePolicy specifies the slope policy specified by the user.
TNA tSchedulerPolicyName	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.1	TNamedItem	not-accessible	Name of the scheduler policy.
TNA tSharedQueuePolicy	1.3.6.1.4.1.6527.3.1.2.16.7.1.1.1	TNamedItem	not-accessible	tSharedQueuePolicy serves as an index and uniquely identifies a queue policy in the managed system.
TNA tSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.1	TNamedItem	not-accessible	tSlopePolicy maintains the name of the slope policy identifying the policy.
TNA tVirtualSchedulerName	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.2	TNamedItem	not-accessible	Name of the scheduler policy.
TNamedItemOrEmpty (54)
TNA tNetworkQueueParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.4	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TNA tNetworkQueuePolicyEHWrrPlcy	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.9	TNamedItemOrEmpty	read-create	The value of tNetworkQueuePolicyEHWrrPlcy specifies the Weighted Round Robin (WRR) policy to use on this HSMDA egress queue.
TNA tNetworkQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.3	TNamedItemOrEmpty	read-create	The tNetworkQueuePoolName specifies the pool that is associated with this network queue. If tNetworkQueuePoolName is empty, no pool has been associated with the queue.
TNA tPortSchPlcyLvl1GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.2	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl1GrpName specifies the group associated with this scheduler policy for priority level set to '1'.
TNA tPortSchPlcyLvl2GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.3	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl2GrpName specifies the group associated with this scheduler policy for priority level set to '2'.
TNA tPortSchPlcyLvl3GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.4	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl3GrpName specifies the group associated with this scheduler policy for priority level set to '3'.
TNA tPortSchPlcyLvl4GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.5	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl4GrpName specifies the group associated with this scheduler policy for priority level set to '4'.
TNA tPortSchPlcyLvl5GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.6	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl5GrpName specifies the group associated with this scheduler policy for priority level set to '5'.
TNA tPortSchPlcyLvl6GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.7	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl6GrpName specifies the group associated with this scheduler policy for priority level set to '6'.
TNA tPortSchPlcyLvl7GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.8	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl7GrpName specifies the group associated with this scheduler policy for priority level set to '7'.
TNA tPortSchPlcyLvl8GrpName	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.9	TNamedItemOrEmpty	read-create	The value of tPortSchPlcyLvl8GrpName specifies the group associated with this scheduler policy for priority level set to '8'.
TNA tQ1NamedPoolSlopePolicy	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.8	TNamedItemOrEmpty	read-create	The value of tQ1NamedPoolSlopePolicy specifies the name of the slop-policy which is used to override the default slope-policy for the named buffer pool.
TNA tQosEgrPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.23	TNamedItemOrEmpty	read-create	The value of tQosEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TNA tQosEgrPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.7	TNamedItemOrEmpty	read-create	tQosEgrPolicerParent specifies the arbiter to which this policer would be feeding
TNA tQosEgrQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.32	TNamedItemOrEmpty	read-create	The value of tQosEgrQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TNA tQosEgrQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.3	TNamedItemOrEmpty	read-create	The value of tQosEgrQueueParent specifies the scheduler to which this queue would be feeding.
TNA tQosEgrQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.24	TNamedItemOrEmpty	read-create	The value of tQosEgrQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
TNA tQosIngPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.22	TNamedItemOrEmpty	read-create	The value of tQosIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TNA tQosIngPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.7	TNamedItemOrEmpty	read-create	tQosIngPolicerParent specifies the arbiter to which this policer would be feeding.
TNA tQosIngQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.23	TNamedItemOrEmpty	read-create	The value of tQosIngQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TNA tQosIngQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.3	TNamedItemOrEmpty	read-create	tQosIngQueueParent specifies the scheduler to which this queue would be feeding.
TNA tQosIngQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.20	TNamedItemOrEmpty	read-create	tQosIngQueuePoolName specifies the name of the pool to be applied for the ingress queue.
TNA tQosPolicerArbiterParent	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.7	TNamedItemOrEmpty	read-create	tQosPolicerArbiterParent specifies the scheduler to which this queue would be feeding.
TNA tSapEgressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.4	TNamedItemOrEmpty	read-create	The value of tSapEgressDot1pFC specifies the forwarding class to be used to classify all the traffic that matches the Dot1p value specified by tSapEgressDot1pValue. Unless tSapEgressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapEgressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.12	TNamedItemOrEmpty	read-create	The value of tSapEgressFCInProfDscp specifies the DSCP name to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCInProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TNA tSapEgressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.13	TNamedItemOrEmpty	read-create	The value of tSapEgressFCOutProfDscp specifies the DSCP name to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec are reset to default values when tSapEgressFCOutProfDscp is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfPrec object or tSapEgressFCOutProfPrec to a value other than their default values.
TNA tSapEgressFCQGrp	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.16	TNamedItemOrEmpty	read-create	The value of tSapEgressFCQGrp specifies the tQosEgrQGroupName. When set to a non-default value, this indicates the name of the queue-group to which traffic will be forwarded.
TNA tSapEgressHsmdaWrrPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.8	TNamedItemOrEmpty	read-create	The value of tSapEgressHsmdaWrrPolicy specifies the HSMDA Weighted Round Robin (WRR) scheduling policy to use.
TNA tSapEgressQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.34	TNamedItemOrEmpty	read-create	The value of tSapEgressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TNA tSapEgressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TNA tSapEgressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.25	TNamedItemOrEmpty	read-create	The value of tSapEgressQueuePoolName specifies the name of the pool to be applied for SAP egress queue.
TNA tSapEgrPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.24	TNamedItemOrEmpty	read-create	The value of tSapEgrPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TNA tSapEgrPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.7	TNamedItemOrEmpty	read-create	tSapEgrPolicerParent specifies the scheduler to which this queue would be feeding.
TNA tSapIngPolicerAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.24	TNamedItemOrEmpty	read-create	The value of tSapIngPolicerAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this policer.
TNA tSapIngPolicerParent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.7	TNamedItemOrEmpty	read-create	tSapIngPolicerParent specifies the scheduler to which this queue would be feeding.
TNA tSapIngressDot1pFC	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.3	TNamedItemOrEmpty	read-create	tSapIngressDot1pFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Dot1p i.e. tSapIngressDot1pValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDot1pFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressDSCPFC	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.3	TNamedItemOrEmpty	read-create	tSapIngressDSCPFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific DSCP i.e. tSapIngressDSCP. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressDSCPFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressFCInProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.9	TNamedItemOrEmpty	read-create	tSapIngressFCInProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'dscp'.
TNA tSapIngressFCOutProfDscp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.12	TNamedItemOrEmpty	read-create	tSapIngressFCOutProfDscp specifies the DSCP to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'dscp'.
TNA tSapIngressFCQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.19	TNamedItemOrEmpty	read-create	tSapIngressFCQGrp specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpBCast	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.21	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpBCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCBCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpMCast	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.20	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpMCast specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCMCastQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressFCQGrpUnknown	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.22	TNamedItemOrEmpty	read-create	tSapIngressFCQGrpUnknown specifies the tQosIngQGroupName. This object must be set along with tSapIngressFCUnknownQueue object. An 'inconsistentValue' error is returned if this object is set to the default and other is set to a non-default value.
TNA tSapIngressIPCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.4	TNamedItemOrEmpty	read-create	tSapIngressIPCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IP criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressIPv6CriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressIPv6CriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific IPv6 criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressIPv6CriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressLspExpFC	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.4	TNamedItemOrEmpty	read-create	The value of the object tSapIngressLspExpFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Lsp Exp value i.e. tSapIngressLspExpValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressLspExpFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressMacCriteriaActionFC	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.4	TNamedItemOrEmpty	read-create	tSapIngressMacCriteriaActionFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific Mac criteria. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressMacCriteriaActionFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressPrecFC	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.3	TNamedItemOrEmpty	read-create	tSapIngressPrecFC specifies the forwarding class or the sub forwarding class to be used to classify all the traffic that matches the specific precedence value i.e. tSapIngressPrecValue. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name] To reference a sub forwarding class, the mapping of the sub forwarding class should be existing in this QoS policy. Unless tSapIngressPrecFC is specified explicitly, this match will be ignored for classification purposes.
TNA tSapIngressQueueAdvCfgPolicy	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.28	TNamedItemOrEmpty	read-create	The value of tSapIngressQueueAdvCfgPolicy specifies the name of the advanced configuration policy to be applied with this queue.
TNA tSapIngressQueueParent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.3	TNamedItemOrEmpty	read-create	The scheduler to which this queue would be feeding to.
TNA tSapIngressQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.22	TNamedItemOrEmpty	read-create	The value of tSapIngressQueuePoolName specifies the name of the pool to be applied for SAP ingress queue.
TNA tSharedQueueParent	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.5	TNamedItemOrEmpty	read-create	tSharedQueueParent specifies the scheduler to which this queue should be feeding into. By default there would be no parent for the queue and it will be controlled by the entity where the queue is instantiated.
TNA tSharedQueuePoolName	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.4	TNamedItemOrEmpty	read-create	tSharedQueuePoolName specifies the pool from which the queue should be allocating its buffer. By default it will share the default pool being used by the entity where the queue is instantiated.
TNA tVirtualSchedulerParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.5	TNamedItemOrEmpty	read-create	The scheduler to which this scheduler would be feeding.
TNetworkPolicyID (1)
TNE tNetworkPolicyIndex	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.1	TNetworkPolicyID	not-accessible
TNonZeroWeight (8)
TNO tPortSchPlcyLvl1GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.10	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl1GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl1GrpName is set to a default value.
TNO tPortSchPlcyLvl2GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.11	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl2GrpWeight specifies the weight associated with the group tPortSchPlcyLvl2GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl2GrpName is set to a default value.
TNO tPortSchPlcyLvl3GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.12	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl1GrpWeight specifies the weight associated with the group tPortSchPlcyLvl3GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl3GrpName is set to a default value.
TNO tPortSchPlcyLvl4GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.13	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl4GrpWeight specifies the weight associated with the group tPortSchPlcyLvl4GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl4GrpName is set to a default value.
TNO tPortSchPlcyLvl5GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.14	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl5GrpWeight specifies the weight associated with the group tPortSchPlcyLvl5GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl5GrpName is set to a default value.
TNO tPortSchPlcyLvl6GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.15	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl6GrpWeight specifies the weight associated with the group tPortSchPlcyLvl6GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl6GrpName is set to a default value.
TNO tPortSchPlcyLvl7GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.16	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl7GrpWeight specifies the weight associated with the group tPortSchPlcyLvl7GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl7GrpName is set to a default value.
TNO tPortSchPlcyLvl8GrpWeight	1.3.6.1.4.1.6527.3.1.2.16.12.6.1.17	TNonZeroWeight	read-create	The value of tPortSchPlcyLvl8GrpWeight specifies the weight associated with the group tPortSchPlcyLvl8GrpName. An 'inconsistentValue' error is returned when this object is set to non-default value and tPortSchPlcyLvl8GrpName is set to a default value.
TPerPacketOffset (6)
TPE tNetworkQueuePolicyEHPktBOffst	1.3.6.1.4.1.6527.3.1.2.16.6.1.1.10	TPerPacketOffset	read-create	The value of tNetworkQueuePolicyEHPktBOffst specifies the packet byte offset to use for the HSMDA egress queues. This value is used for the adjustment to make to the size of each packet for HSMDA queue accounting.
TPE tQosEgrPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.15	TPerPacketOffset	read-create	tQosEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
TPE tQosEgrQueuePktOffset	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.33	TPerPacketOffset	read-create	The value of tQosEgrQueuePktOffset specifies the packet byte offset to be applied with this queue.
TPE tQosIngPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.15	TPerPacketOffset	read-create	tQosIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
TPE tSapEgrPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.16	TPerPacketOffset	read-create	tSapEgrPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
TPE tSapIngPolicerPktOffset	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.16	TPerPacketOffset	read-create	tSapIngPolicerPktOffset specifies the packet byte offset for addition of policing information by this policer.
TPIRRate (6)
TPI tQosEgrQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.14	TPIRRate	read-create	The value of tQosEgrQueueAdminPIR specifies the administrative PIR. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIR is set to non-default value when the object tQosEgrQueueRateType is set to 'percent'.
TPI tQosIngQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.15	TPIRRate	read-create	tQosIngQueueAdminPIR specifies the administrative PIR specified by the user.
TPI tSapEgressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.14	TPIRRate	read-create	The administrative PIR specified by the user.
TPI tSapEgressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.16	TPIRRate	read-only	The administrative PIR specified by the user.
TPI tSapIngressQueueAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.15	TPIRRate	read-create	The administrative PIR specified by the user.
TPI tSapIngressQueueOperPIR	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.17	TPIRRate	read-only	The operating PIR.
TPIRRatePercent (2)
TPI tNetworkQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.12	TPIRRatePercent	read-create	The percentage of max rate allowed.
TPI tSharedQueuePIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.12	TPIRRatePercent	read-create	tSharedQueuePIR specifies the peak rate as a percentage of maximum rate for this queue.
TPlcrBurstSizeBytes (10)
TPL tQosEgrPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.12	TPlcrBurstSizeBytes	read-create	tQosEgrPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
TPL tQosEgrPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.13	TPlcrBurstSizeBytes	read-create	tQosEgrPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
TPL tQosIngPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.12	TPlcrBurstSizeBytes	read-create	tQosIngPolicerCBS specifies the amount of reserved buffer space (in bytes) used to configure the policer's CIR leaky bucket's 'exceed' threshold.
TPL tQosIngPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.13	TPlcrBurstSizeBytes	read-create	tQosIngPolicerMBS specifies the maximum amount of buffer space (in bytes) used to configure the policer's PIR leaky bucket's high priority 'violate' threshold.
TPL tQosPolicerCtrlPolMinMBSSep	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.6	TPlcrBurstSizeBytes	read-create	The value of tQosPolicerCtrlPolMinMBSSep specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer.
TPL tQosPolicerLevelCumMBS	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.3	TPlcrBurstSizeBytes	read-create	The value of tQosPolicerLevelCumMBS specifies the maximum amount of cumulative buffer space (in bytes) allowed for this level by this policer.
TPL tSapEgrPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.15	TPlcrBurstSizeBytes	read-create	The tSapEgrPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
TPL tSapEgrPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.13	TPlcrBurstSizeBytes	read-create	The tSapEgrPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
TPL tSapIngPolicerCBS	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.15	TPlcrBurstSizeBytes	read-create	The tSapIngPolicerCBS specifies the 'exceed' threshold of the CIR leaky bucket of this policer.
TPL tSapIngPolicerMBS	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.13	TPlcrBurstSizeBytes	read-create	The tSapIngPolicerMBS specifies the high priority 'violate' threshold of PIR leaky bucket of this policer.
TPolicerRateType (2)
TPO tSapEgrPolicerRateType	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.19	TPolicerRateType	read-create	The value of tSapEgrPolicerRateType specifies the type of egress policer rate. When the value of the object is set to 'kbps', the egresss policer rates are specified in kbps. The objects tSapEgrPolicerAdminPIRPercent and tSapEgrPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the egress policer rates are specified in percentage. The objects tSapEgrPolicerAdminPIR and tSapEgrPolicerAdminCIR will be set to their default values.
TPO tSapIngPolicerRateType	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.19	TPolicerRateType	read-create	The value of tSapIngPolicerRateType specifies the type of ingress policer rate. When the value of the object is set to 'kbps', the ingresss policer rates are specified in kbps. The objects tSapIngPolicerAdminPIRPercent and tSapIngPolicerAdminCIRPercent will be set to their default values. When the value of the object is set to 'percentOfLocalLimit', the ingress policer rates are specified in percentage. The objects tSapIngPolicerAdminPIR and tSapIngPolicerAdminCIR will be set to their default values.
TPolicerWeight (5)
TPO tQosEgrPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.9	TPolicerWeight	read-create	tQosEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TPO tQosIngPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.9	TPolicerWeight	read-create	tQosIngPolicerWeight specifies the weight that needs to be used by the arbiter to which this policer would be feeding
TPO tQosPolicerArbiterWeight	1.3.6.1.4.1.6527.3.1.2.16.27.3.1.9	TPolicerWeight	read-create	tQosPolicerArbiterWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TPO tSapEgrPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.9	TPolicerWeight	read-create	tSapEgrPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TPO tSapIngPolicerWeight	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.9	TPolicerWeight	read-create	tSapIngPolicerWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TPortSchedulerCIR (9)
TPO tPortSchedulerPlcyLvl1CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.7	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl1CIR specifies the within-cir bandwidth limit for priority level 1.
TPO tPortSchedulerPlcyLvl2CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.9	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl2CIR specifies the within-cir bandwidth limit for priority level 2.
TPO tPortSchedulerPlcyLvl3CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.11	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl3CIR specifies the within-cir bandwidth limit for priority level 3.
TPO tPortSchedulerPlcyLvl4CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.13	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl4CIR specifies the within-cir bandwidth limit for priority level 4.
TPO tPortSchedulerPlcyLvl5CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.15	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl5CIR specifies the within-cir bandwidth limit for priority level 5.
TPO tPortSchedulerPlcyLvl6CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.17	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl6CIR specifies the within-cir bandwidth limit for priority level 6.
TPO tPortSchedulerPlcyLvl7CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.19	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl7CIR specifies the within-cir bandwidth limit for priority level 7.
TPO tPortSchedulerPlcyLvl8CIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.21	TPortSchedulerCIR	read-create	The value of tPortSchedulerPlcyLvl8CIR specifies the within-cir bandwidth limit for priority level 8.
TPO tPortSchPlcyGrpAdminCIR	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.5	TPortSchedulerCIR	read-create	The value of tPortSchPlcyGrpAdminCIR specifies the within-cir bandwidth limit of this port scheduler group.
TPortSchedulerPIRRate (10)
TPO tPortSchedulerPlcyLvl1PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.6	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl1PIR specifies the total bandwidth limit, PIR, for priority level 1.
TPO tPortSchedulerPlcyLvl2PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.8	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl2PIR specifies the total bandwidth limit, PIR, for priority level 2.
TPO tPortSchedulerPlcyLvl3PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.10	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl3PIR specifies the total bandwidth limit, PIR, for priority level 3.
TPO tPortSchedulerPlcyLvl4PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.12	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl4PIR specifies the total bandwidth limit, PIR, for priority level 4.
TPO tPortSchedulerPlcyLvl5PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.14	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl5PIR specifies the total bandwidth limit, PIR, for priority level 5.
TPO tPortSchedulerPlcyLvl6PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.16	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl6PIR specifies the total bandwidth limit, PIR, for priority level 6.
TPO tPortSchedulerPlcyLvl7PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.18	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl7PIR specifies the total bandwidth limit, PIR, for priority level 7.
TPO tPortSchedulerPlcyLvl8PIR	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.20	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyLvl8PIR specifies the total bandwidth limit, PIR, for priority level 8.
TPO tPortSchedulerPlcyMaxRate	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.5	TPortSchedulerPIRRate	read-create	The value of tPortSchedulerPlcyMaxRate specifies the explicit maximum frame based bandwidth limit of this port scheduler.
TPO tPortSchPlcyGrpAdminPIR	1.3.6.1.4.1.6527.3.1.2.16.12.5.1.4	TPortSchedulerPIRRate	read-create	The value of tPortSchPlcyGrpAdminPIR specifies the total bandwidth limit, Admin PIR of this port scheduler group.
TPrecValue (3)
TPR tNetworkEgressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.1	TPrecValue	not-accessible	The value of tNetworkEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tNetworkEgressPrecTable.
TPR tSapEgressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.1	TPrecValue	not-accessible	The value of tSapEgressPrecValue indicates the precedence value for which the mapping is done. It is used as a secondary index for tSapEgressPrecTable.
TPR tSapIngressPrecValue	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.1	TPrecValue	not-accessible	Precedence value for which the mapping is done.
TPrecValueOrNone (4)
TPR tSapEgressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.14	TPrecValueOrNone	read-create	The value of tSapEgressFCInProfPrec specifies the precedence value to set for in-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TPR tSapEgressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.15	TPrecValueOrNone	read-create	The value of tSapEgressFCOutProfPrec specifies the precedence value to set for out-profile frames in this forwarding class. The values of tSapEgressFCInProfPrec and tSapEgressFCOutProfPrec must be be set to either the default or non-default values for both. An inconsistentValue error is returned if one object is set to the default and other is set to a non-default value. The values of tSapEgressFCInProfDscp and tSapEgressFCOutProfDscp are reset to default values when tSapEgressFCOutProfPrec is set to any value other than default. An inconsistentValue error is returned if this object is set to any value other than its default value when setting tSapEgressFCInProfDscp object or tSapEgressFCOutProfDscp to a value other than their default values.
TPR tSapIngressFCInProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.10	TPrecValueOrNone	read-create	tSapIngressFCInProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCInProfRemark is specified to be 'precedence'.
TPR tSapIngressFCOutProfPrec	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.13	TPrecValueOrNone	read-create	tSapIngressFCOutProfPrec specifies the precedence value to be used while remarking the in profile packets when the in-profile remarking type, tSapIngressFCOutProfRemark is specified to be 'precedence'.
TPriority (1)
TPR tSapIngressDefaultFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.6	TPriority	read-create	the priority to assign to traffic ingressing as the default action queue.
TPriorityOrDefault (7)
TPR tSapIngressDot1pPriority	1.3.6.1.4.1.6527.3.1.2.16.3.4.1.4	TPriorityOrDefault	read-create	priority to use for packets that match the dot1p value tSapIngressDot1pValue.
TPR tSapIngressDSCPPriority	1.3.6.1.4.1.6527.3.1.2.16.3.3.1.4	TPriorityOrDefault	read-create
TPR tSapIngressIPCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.5	TPriorityOrDefault	read-create	priority for packets which match this entry's criteria. when set to default, the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
TPR tSapIngressIPv6CriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressIPv6CriteriaActionPriority specifies the priority for packets which match this entry's criteria. When set to 'default', the packet is sent to the queue from DSCP/dot1p/FC which matched the packet, using the priority from the DSCP/dot1p/FC which matched the packet.
TPR tSapIngressLspExpFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.11.1.5	TPriorityOrDefault	read-create	The value of the object tSapIngressLspExpFCPriority specifies the priority to be assigned to the matching traffic.
TPR tSapIngressMacCriteriaActionPriority	1.3.6.1.4.1.6527.3.1.2.16.3.6.1.5	TPriorityOrDefault	read-create
TPR tSapIngressPrecFCPriority	1.3.6.1.4.1.6527.3.1.2.16.3.8.1.4	TPriorityOrDefault	read-create	The priority to be assigned to the matching traffic.
TProfile (4)
TPR tNetworkEgressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.9.1.5	TProfile	read-create	The value of tNetworkEgressDSCPProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressDSCPProfile. It must be set at the time of row creation.
TPR tNetworkEgressPrecProfile	1.3.6.1.4.1.6527.3.1.2.16.5.10.1.5	TProfile	read-create	The value of tNetworkEgressPrecProfile specifies the egress classification rule that will overwrite the profile of the packet derived from the egress. The new profile value is used for egress remarking and queue congestion behavior. There is no DEFVAL for tNetworkEgressPrecProfile. It must be set at the time of row creation.
TPR tNetworkIngressDSCPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.2.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
TPR tNetworkIngressLSPEXPProfile	1.3.6.1.4.1.6527.3.1.2.16.5.4.1.4	TProfile	read-create	there is no DEFVAL for this object. it must be deliberately set before activating the row.
TProfileOrDei (1)
TPR tNetworkPolicyIngressDefaultActionProfile	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.8	TProfileOrDei	read-create	tNetworkPolicyIngressDefaultActionProfile specifies the default profile to be used for the ingressing traffic.
TProfileOrNone (4)
TPR tSapEgressDSCPprofile	1.3.6.1.4.1.6527.3.1.2.16.4.5.1.6	TProfileOrNone	read-create	The value of tSapEgressDSCPprofile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
TPR tSapEgressPrecProfile	1.3.6.1.4.1.6527.3.1.2.16.4.6.1.6	TProfileOrNone	read-create	The value of tSapEgressPrecProfile, when provided, specifies the egress classification rule that will overwrite the profile of the packet derived from the ingress. The new profile value is used for egress remarking and queue congestion behavior.
TPR tSapEgrIPCritActionProfile	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.23	TProfileOrNone	read-create	tSapEgrIPCritActionProfile specifies the profile of the traffic that matches the specific IP or IPv6 criteria. The value none indicates that the profile is derived from ingress classification and profiling functions.
TPR tSapIngressFCProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.14	TProfileOrNone	read-create	tSapIngressFCProfile specifies the profile of the packets associated with this forwarding class. This object can not be set to anything but 'none' if the queues being used by this mapping do not have their modes, tSapIngressQueueMode set to 'profile'.
TProfileUseDEOrNone (1)
TPR tSapEgressDot1pProfile	1.3.6.1.4.1.6527.3.1.2.16.4.10.1.5	TProfileUseDEOrNone	read-create	The value of tSapEgressDot1pProfile specifies the profile to use for packets that match the dot1p value specified by tSapEgressDot1pValue.
TQueueId (9)
TQU tNetworkQueue	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.1	TQueueId	not-accessible	The queue ID is used as the secondary index to the table entry.
TQU tNetworkQueueFC	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.3	TQueueId	read-create	The specific queue to be used for packets in this forwarding class.
TQU tNetworkQueueFCEgrHsmdaQueue	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.8	TQueueId	read-create	The value of tNetworkQueueFCEgrHsmdaQueue specifies the egress hsmda queue to be used for packets in this forwarding class. This is only applicable on supported hsmda ports.
TQU tNetworkQueueFCMCast	1.3.6.1.4.1.6527.3.1.2.16.6.3.1.4	TQueueId	read-create	The specific multicast queue to be used for packets in this forwarding class. The queue is used only for specific entities and will be ignored wherever it is irrelevant.
TQU tSharedQueueFCBCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.6	TQueueId	read-create	The value of tSharedQueueFCBCastQueue specifies the logical queue that broadscast traffic classified into this forwarding class should use.
TQU tSharedQueueFCMCastQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.5	TQueueId	read-create	The value of tSharedQueueFCMCastQueue specifies the logical queue that mutlticast traffic classified into this forwarding class should use.
TQU tSharedQueueFCQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.4	TQueueId	read-create	tSharedQueueFCQueue specifies the logical queue that the traffic classified into this forwarding class should use.
TQU tSharedQueueFCUnknownQueue	1.3.6.1.4.1.6527.3.1.2.16.7.3.1.7	TQueueId	read-create	The value of tSharedQueueFCUnknownQueue specifies the logical queue that unknown traffic classified into this forwarding class should use.
TQU tSharedQueueId	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.1	TQueueId	not-accessible	tSharedQueueId serves as the secondary index. When used in conjunction with tSharedQueuePolicy, it uniquely identifies a shared queue in the managed system.
TQueueMode (2)
TQU tQosIngQueueMode	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.19	TQueueMode	read-create	tQosIngQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TQU tSapIngressQueueMode	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.21	TQueueMode	read-create	tSapIngressQueueMode specifies the mode in which the queue is operating. This attribute is associated with the queue at the time of creation and cannot be modified thereafter.
TRatePercent (2)
TRA tNetworkQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.11	TRatePercent	read-create	The percentage of max rate allowed.
TRA tSharedQueueCIR	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.11	TRatePercent	read-create	tSharedQueueCIR specifies the committed rate as a percentage of maximum rate for this queue.
TRateType (1)
TRA tQosEgrQueueRateType	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.30	TRateType	read-create	The value of tQosEgrQueueRateType specifies the type of Egress queue rate. When the value of the object is set to 'kbps', the egresss queue rates are specified in kbps. The objects tQosEgrQueueAdminCIRPercent and tQosEgrQueueAdminPIRPercent will be set to their default values. When the value of the object is set to 'percent', the egress queue rates are specified in percentage. The objects tQosEgrQueueAdminCIR and tQosEgrQueueAdminPIR will be set to their default values.
TRemarkType (2)
TRE tSapIngressFCInProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.8	TRemarkType	read-create	tSapIngressFCInProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TRE tSapIngressFCOutProfRemark	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.11	TRemarkType	read-create	tSapIngressFCOutProfRemark specifies the remarking type to be used for the in profile packets feeding into the queues.
TruthValue (37)
T/F tAdvCfgDecOnly	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.21	TruthValue	read-create	The value of tAdvCfgDecOnly specifies the tAdvCfgTimeAvgFactor adjustment to be applied if the new offered rate is decreasing compared to the previous offered rate. If the new offered rate is greater than the previous offered rate, the adjustment is not applied. When the tAdvCfgDecOnly is set to 'false', it has no impact on tAdvCfgTimeAvgFactor adjustment.
T/F tAdvCfgFastStart	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.14	TruthValue	read-create	The value of tAdvCfgFastStart specifies the whether fast detection of initial bandwidth on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStart is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
T/F tAdvCfgFastStop	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.15	TruthValue	read-create	The value of tAdvCfgFastStop specifies the whether fast detection of lack of offered rate on a child policer or queue associated with tAdvCfgPolicyName is enabled/disabled. When the tAdvCfgFastStop is set to 'false', the system uses the normal sampling interval behavior of both newly active and currently active children.
T/F tAdvCfgMinOnly	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.20	TruthValue	read-create	The value of tAdvCfgMinOnly specifies the system to interpret the increase in tAdvCfgChildAdminRate as a minimum offered rate. When the tAdvCfgFastStop is set to 'false', the system uses the specified increase in tAdvCfgChildAdmnPirPrcnt or tAdvCfgChildAdminRate as a minimum offered rate even for inactive queues or policers associated with tAdvCfgPolicyName.
T/F tNetworkEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.5.7.1.10	TruthValue	read-write	The value of tNetworkEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tNetworkEgressFCForceDEValue object is not set to '-1'.
T/F tNetworkPolicyEgressRemark	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.9	TruthValue	read-create	The object tNetworkPolicyEgressRemark specifies if the system will remark the egress packets or not.
T/F tNetworkPolicyEgressRemarkDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.12	TruthValue	read-create	The value of tNetworkPolicyEgressRemarkDscp object specifies whether DSCP bits in the internal IP header should be remarked. This object is valid only when tNetworkPolicyEgressRemark is set to 'true'.
T/F tNetworkPolicyIngressLerUseDscp	1.3.6.1.4.1.6527.3.1.2.16.5.1.1.11	TruthValue	read-create	The object has significance only for the label edge routers which should honor the DSCP markings instead of the LSPEXP bits.
T/F tNetworkQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.9	TruthValue	read-create	This object specifies if this is a multicast queue or not.
T/F tNetworkQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.17	TruthValue	read-create	The value of the object tNetworkQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this network queue is parented by a port-level scheduler.
T/F tQosEgrPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.16	TruthValue	read-create	The value of tQosEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tQosEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
T/F tQosEgrQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.19	TruthValue	read-create	The value of tQosEgrQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tQosEgrQueueParent. Only one kind of parent is allowed.
T/F tQosEgrQueueXPWredQ	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.25	TruthValue	read-create	The value of tQosEgrQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
T/F tQosIngPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.16	TruthValue	read-create	The value of tQosIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tQosIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tQosIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
T/F tQosIngQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.8	TruthValue	read-create	tQosIngQueueMCast specifies if this is a multicast queue.
T/F tQosIngQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.18	TruthValue	read-create	tQosIngQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tQosIngQueuePoliced overrides the bandwidth specified by the object tQosIngQueueAdminCIR.
T/F tQosPolicerCtrlPolProfPref	1.3.6.1.4.1.6527.3.1.2.16.27.1.1.7	TruthValue	read-create	The value of tQosPolicerCtrlPolProfPref specifies the minimum amount of seperation buffer space (in bytes) allowed by this policer. When the value of this object is set to 'true', preferred profile is applied to this policy. When the value is set to 'false', no preffered profile is set to this policy.
T/F tQosPolicerLevelFixedMBS	1.3.6.1.4.1.6527.3.1.2.16.27.2.1.4	TruthValue	read-create	The value of tQosPolicerLevelFixedMBS specifies whether the cumulative buffer space is fixed for this level. When the value of this object is set to 'true', cumulative buffer space for this level is fixed. When the value is set to 'false', cumulative buffer space for this level is not fixed.
T/F tSapEgressEthernetCtag	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.11	TruthValue	read-create	The value of tSapEgressEthernetCtag specifies the tag from which the dot1p and DE (Drop-Eligible) values will be drawn to be used by all tSapEgressDot1pEntry objects related to this policy. The value 'true' specifies that the top customer tag will be used for egress reclassification based on dot1p criteria. The value 'false' specifies that a service delimiting tag will be used for egress reclassification based on dot1p criteria.
T/F tSapEgressFCDEMark	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.11	TruthValue	read-create	The value of tSapEgressFCDEMark specifies whether to set DE value in the frames of this forwarding class. An inconsistentValue error is returned if this object is set to 'false' when tSapEgressFCForceDEValue object is not set to '-1'.
T/F tSapEgressFCDot1PHsmdaProfile	1.3.6.1.4.1.6527.3.1.2.16.4.3.1.7	TruthValue	read-create	The value of the object tSapEgressFCDot1PHsmdaProfile specifies if the system will perform egress profiling on HSMDA queues or not. The tSapEgressFCDot1PHsmdaProfile object is obsoleted in 9.0 Release.
T/F tSapEgressQueueUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.19	TruthValue	read-create	The value of the object tSapEgressQueueUsePortParent specifies whether this queue is parented by a port-level scheduler. When the value is 'true', this SAP egress queue is parented by a port-level scheduler. This object is mutually exclusive with tSapEgressQueueParent. Only one kind of parent is allowed.
T/F tSapEgressQueueXPWredQ	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.26	TruthValue	read-create	The value of tSapEgressQueueXPWredQ specifies whether to alter the generic pool association of the queue for the purpose of allowing queue-specific WRED slopes with minimal provisioning.
T/F tSapEgrPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.25	TruthValue	read-create	The value of tSapEgrPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the egress policer. When the value of tSapEgrPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapEgrPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an egress policer.
T/F tSapIngPolicerProfileCapped	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.25	TruthValue	read-create	The value of tSapIngPolicerProfileCapped specifies how the explicit in-profile and undetermined profile traffic should be handled at the ingress policer. When the value of tSapIngPolicerProfileCapped is set to 'true', both explicit in-profile and undetermined profile traffic is honored up to CIR, above which it is marked as out-of-profile. If CIR is set to zero, then all explicit in-profile and undetermined profile packets, along with the explicit out-of-profile packets are marked as out-of-profile. The default behavior when tSapIngPolicerProfileCapped is set to 'false' is to ignore the CIR output state when an explicit in-profile packet is handled by an ingress policer.
T/F tSapIngressFCBCastPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.29	TruthValue	read-create	The value of tSapIngressFCBCastPlcrFPQGrp specifies whether to use the specified broadcast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCBCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCBCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressFCDE1OutOfProfile	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.18	TruthValue	read-create	The value of tSapIngressFCDE1OutOfProfile specifies whether frames with DE value of '1' are to be treated as out-of-profile (as if tSapIngressFCProfile was set to 'out'). When tSapIngressFCDE1OutOfProfile is set to 'true', frames with DE value of '1' are autmatically classified as out-of-profile. Frames with DE value of '0' will continue to be policed based on the value of tSapIngressQueueAdminCIR. That is, if the dynamic rate of ingress queue is within CIR, frames with DE=0 will be treated as in-profile (as if tSapIngressFCProfile was set to 'in') otherwise these frames are treated as out-of-profile. When tSapIngressFCDE1OutOfProfile is set to 'true', it supercedes action specified by the value of tSapIngressFCProfile.
T/F tSapIngressFCMCastPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.28	TruthValue	read-create	The value of tSapIngressFCMCastPlcrFPQGrp specifies whether to use the specified multicast policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCMCastPlcrFPQGrp is set to 'true', it specifies the FC to use the specific multicast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCMCastPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressFCPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.27	TruthValue	read-create	The value of tSapIngressFCPlcrFPQGrp specifies whether to use the specified policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCPlcrFPQGrp is set to 'true', it specifies the FC to use the specific policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressFCUnknownPlcrFPQGrp	1.3.6.1.4.1.6527.3.1.2.16.3.7.1.30	TruthValue	read-create	The value of tSapIngressFCUnknownPlcrFPQGrp specifies whether to use the specified unknown policer defined in FP(forwading-plane) Queue group for this SAP. When tSapIngressFCUnknownPlcrFPQGrp is set to 'true', it specifies the FC to use the specific broadcast policer defined in the FP Queue Group instance attached to the SAP specified by sapIngressFPQGrp and sapIngressFPQGrpInstanceId. An 'inconsistentValue' error is returned if tSapIngressFCUnknownPlcrFPQGrp is set to a non-default value and an entry corresponding to the policer tSapIngressFCPolicer does not exist in Queue group attached at the FP.
T/F tSapIngressHsmdaQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.10.1.9	TruthValue	read-create	The value of tSapIngressHsmdaQueuePoliced specifies whether the out of profile traffic feeding into the physical queue instance should be dropped. When the value is 'true', out-of-profile packets are discarded. This policing function is different than the shaping function normally performed by the queues defined rate in that scheduling is not stopped for the queue when the rate is exceeded. Accordingly, tSapIngressHsmdaQueuePoliced overrides the bandwidth specified by the object tSapIngressHsmdaQueueAdminCIR.
T/F tSapIngressQueueMCast	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.8	TruthValue	read-create	This object specifies if this is a multicast queue or not.
T/F tSapIngressQueuePoliced	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.20	TruthValue	read-create	tSapIngressQueuePoliced specifies that the out of profile traffic feeding into the physical queue instance should be dropped. tSapIngressQueuePoliced overrides the bandwidth specified by the object tSapIngressQueueAdminCIR.
T/F tSchedulerPolicyFrameBasedAccnt	1.3.6.1.4.1.6527.3.1.2.16.12.1.1.5	TruthValue	read-create	The value of tSchedulerPolicyFrameBasedAccnt specifies whether to use frame-based accounting for the schedulers within the scheduler policy and the children queues parented to the scheduling policy. If the value is 'false', the default packet-based accounting method will be used.
T/F tSharedQueueIsMultipoint	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.16	TruthValue	read-create	The value of tSharedQueueIsMultipoint specifies whether this shared queue is a multipoint-shared queue. This object can only be modified at row creation time; any attempt to set it after creation is silently ignored.
T/F tVirtualSchedulerSummedCIR	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.12	TruthValue	read-create	tVirtualSchedulerSummedCIR specifies if the CIR should be used as the summed value of the children. If set to 'true', tVirtualSchedulerCIR loses its meaning.
T/F tVirtualSchedulerUsePortParent	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.14	TruthValue	read-create	The value of the object tVirtualSchedulerUsePortParent specifies whether this scheduler is parented by a port-level scheduler. When the value is 'true', this virtual scheduler is parented by a port-level scheduler. This object is mutually exclusive with tVirtualSchedulerParent. Only one kind of parent is allowed.
TSapEgressPolicyID (2)
TSA tSapEgressIndex	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.1	TSapEgressPolicyID	not-accessible	the sap-egress policy ID is used as index for the table.
TSA tSapEgrPolicyNameId	1.3.6.1.4.1.6527.3.1.2.16.4.9.1.1	TSapEgressPolicyID	read-only	The value of the object tSapEgrPolicyNameId specifies the policy name associated with this SAP egress policy.
TSapIngressPolicyID (2)
TSA tSapIngPolicyNameId	1.3.6.1.4.1.6527.3.1.2.16.3.13.1.1	TSapIngressPolicyID	read-only	The value of the object tSapIngPolicyNameId specifies the policy name associated with this SAP ingress policy.
TSA tSapIngressIndex	1.3.6.1.4.1.6527.3.1.2.16.3.1.1.1	TSapIngressPolicyID	not-accessible	the policy ID is the index to this table.
TTcpUdpPort (12)
TTC tSapEgrIPCritDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.17	TTcpUdpPort	read-create	The value of tSapEgrIPCritDestPortValue1 specifies the first TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
TTC tSapEgrIPCritDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.18	TTcpUdpPort	read-create	The value of tSapEgrIPCritDestPortValue2 specifies the second TCP/UDP destination port value. The value of this object is used according to the value of tSapEgrIPCritDestPortOperator.
TTC tSapEgrIPCritSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.14	TTcpUdpPort	read-create	The value of tSapEgrIPCritSourcePortValue1 specifies the first TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
TTC tSapEgrIPCritSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.15	TTcpUdpPort	read-create	The value of tSapEgrIPCritSourcePortValue2 specifies the second TCP/UDP source port value. The value of this object is used according to the value of tSapEgrIPCritSourcePortOperator.
TTC tSapIngressIPCriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.14	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TTC tSapIngressIPCriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.15	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaDestPortOperator.
TTC tSapIngressIPCriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.11	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
TTC tSapIngressIPCriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.12	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPCriteriaSourcePortOperator.
TTC tSapIngressIPv6CriteriaDestPortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.14	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TTC tSapIngressIPv6CriteriaDestPortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.15	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaDestPortValue2 specifies the TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaDestPortOperator.
TTC tSapIngressIPv6CriteriaSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.11	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue1 specifies the TCP/UDP port value1. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
TTC tSapIngressIPv6CriteriaSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.12	TTcpUdpPort	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortValue2 specifies TCP/UDP port value2. The value of this object is used according to the description for tSapIngressIPv6CriteriaSourcePortOperator.
TTcpUdpPortOperator (6)
TTC tSapEgrIPCritDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.19	TTcpUdpPortOperator	read-create	The value of tSapEgrIPCritDestPortOperator specifies the manner in which tSapEgrIPCritDestPortValue1 and tSapEgrIPCritDestPortValue2 are to be used.
TTC tSapEgrIPCritSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.16	TTcpUdpPortOperator	read-create	The value of tSapEgrIPCritSourcePortOperator specifies the manner in which tSapEgrIPCritSourcePortValue1 and tSapEgrIPCritSourcePortValue2 are to be used.
TTC tSapIngressIPCriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.16	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaDestPortValue1 and tSapIngressIPCriteriaDestPortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaDestPortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPCriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.5.1.13	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tSapIngressIPCriteriaSourcePortValue1 and tSapIngressIPCriteriaSourcePortValue2 are to be used. The value of these latter 2 objects and tSapIngressIPCriteriaSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tSapIngressIPv6CriteriaDestPortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.16	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaDestPortOperator specifies the manner in which tSapIngressIPv6CriteriaDestPortValue1 and tSapIngressIPv6CriteriaDestPortValue2 are to be used.
TTC tSapIngressIPv6CriteriaSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.16.3.9.1.13	TTcpUdpPortOperator	read-create	The value of the object tSapIngressIPv6CriteriaSourcePortOperator specifies The operator specifies the manner in which tSapIngressIPv6CriteriaSourcePortValue1 and tSapIngressIPv6CriteriaSourcePortValue2 are to be used.
TWeight (32)
TWE tHsmdaPoolRoot1AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.6	TWeight	read-create	The value of tHsmdaPoolRoot1AllocWeight specifies the weight that will be applied to the first root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot2AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.7	TWeight	read-create	The value of tHsmdaPoolRoot2AllocWeight specifies the weight that will be applied to the second root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot3AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.8	TWeight	read-create	The value of tHsmdaPoolRoot3AllocWeight specifies the weight that will be applied to the third root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot4AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.9	TWeight	read-create	The value of tHsmdaPoolRoot4AllocWeight specifies the weight that will be applied to the fourth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot5AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.10	TWeight	read-create	The value of tHsmdaPoolRoot5AllocWeight specifies the weight that will be applied to the fifth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot6AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.11	TWeight	read-create	The value of tHsmdaPoolRoot6AllocWeight specifies the weight that will be applied to the sixth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot7AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.12	TWeight	read-create	The value of tHsmdaPoolRoot7AllocWeight specifies the weight that will be applied to the seventh root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tHsmdaPoolRoot8AllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.13	TWeight	read-create	The value of tHsmdaPoolRoot8AllocWeight specifies the weight that will be applied to the eighth root pool and is divided by the sum of all root pool weights to derive the pool's buffer allocation factor.
TWE tNetworkQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.8	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
TWE tNetworkQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.21	TWeight	read-create	The value of the object tNetworkQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tNetworkQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.19	TWeight	read-create	The value of the object tNetworkQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tNetworkQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.6	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
TWE tPortSchedulerPlcyOrphanCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.25	TWeight	read-create	The value of tPortSchedulerPlcyOrphanCIRWght specifies the weight of orphaned queues and schedulers that are within-cir.
TWE tPortSchedulerPlcyOrphanWeight	1.3.6.1.4.1.6527.3.1.2.16.12.3.1.23	TWeight	read-create	The value of tPortSchedulerPlcyOrphanWeight specifies the weight of orphaned queues and schedulers that are above-cir.
TWE tQosEgrQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.7	TWeight	read-create	The value of tQosEgrQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
TWE tQosEgrQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.23	TWeight	read-create	The value of the object tQosEgrQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tQosEgrQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.21	TWeight	read-create	The value of the object tQosEgrQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tQosEgrQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.5	TWeight	read-create	The value of tQosEgrQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TWE tQosIngQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.7	TWeight	read-create	tQosIngQueueCIRWeight specifies the weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
TWE tQosIngQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.5.1.5	TWeight	read-create	tQosIngQueueWeight specifies the weight that needs to be used by the scheduler to which this queue would be feeding.
TWE tSapEgressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
TWE tSapEgressQueuePortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.23	TWeight	read-create	The value of the object tSapEgressQueuePortCIRWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tSapEgressQueuePortWght	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.21	TWeight	read-create	The value of the object tSapEgressQueuePortWght specifies the weight this queue will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tSapEgressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
TWE tSapIngressQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.7	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding to.
TWE tSapIngressQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.5	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding to.
TWE tSharedQueueCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.9	TWeight	read-create	tSharedQueueCIRWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is conforming to the committed rate.
TWE tSharedQueueWeight	1.3.6.1.4.1.6527.3.1.2.16.7.2.1.7	TWeight	read-create	tSharedQueueWeight specifies the weight that this queue should be assigned by the parent among all the entities feeding into the parent with the same level when the traffic is exceeding the committed rate.
TWE tVirtualSchedulerCIRWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.9	TWeight	read-create	The weight that needs to be used until the committed rate by the scheduler to which this queue would be feeding.
TWE tVirtualSchedulerPortCIRWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.18	TWeight	read-create	The value of the object tVirtualSchedulerPortCIRWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its within-cir offered load.
TWE tVirtualSchedulerPortWght	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.16	TWeight	read-create	The value of the object tVirtualSchedulerPortWght specifies the weight this scheduler will use to receive bandwidth from the port-level scheduler for its above-cir offered load.
TWE tVirtualSchedulerWeight	1.3.6.1.4.1.6527.3.1.2.16.12.2.1.7	TWeight	read-create	The weight that needs to be used by the scheduler to which this queue would be feeding.
Unsigned32 (85)
U32 tAdvCfgAbvOffCapPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.16	Unsigned32	read-create	The value of tAdvCfgAbvOffCapPirPrcnt specifies the percentage of the child's administrative PIR that should be fair share increase limit, capped by the child's PIR. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '0', the system disables the fair share increase function and configures the actual distribution rate. When the value of tAdvCfgAbvOffCapPirPrcnt is set to '10000', the fair share operational PIR rate increase limit from all child policers and queues associated with tAdvCfgPolicyName policy are removed.
U32 tAdvCfgBWDGranPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.18	Unsigned32	read-create	The value of tAdvCfgBWDGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the rounding step value. When the value of tAdvCfgBWDGranPirPrcnt is set to '0', the system removes the operational PIR rounding behavior from all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
U32 tAdvCfgChildAdmnPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.5	Unsigned32	read-create	The value of tAdvCfgChildAdmnPirPrcnt specifies the percentage of the child's administrative PIR that should be added to the child's offered rate, capped by the child's PIR. When the value of tAdvCfgChildAdmnPirPrcnt is set to '0', offered rate increase from all child policers and queues specified by tAdvCfgPolicyName policy are removed.
U32 tAdvCfgHiRateHoldTime	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.11	Unsigned32	read-create	The value of tAdvCfgHiRateHoldTime specifies the time period that the current offered rate should be maintained for a child policer or queue. When tAdvCfgHiRateHoldTime is set to '0', any currently configured hold time for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
U32 tAdvCfgMaxDecPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.9	Unsigned32	read-create	The value of tAdvCfgMaxDecPirPrcnt specifies the percentage of the child's administrative PIR that should be used as the decrement limit to offered rate change. When the value of tAdvCfgMaxDecPirPrcnt is set to '10000', any currently configured maximum decrement limit for all child policers and queues associated with the policy specified by tAdvCfgPolicyName are removed.
U32 tAdvCfgOMGranPirPrcnt	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.7	Unsigned32	read-create	The value of tAdvCfgOMGranPirPrcnt specifies the granularity percentage of the child's administrative PIR that should be used as the threshold sensitivity to offered rate. When the value of tAdvCfgOMGranPirPrcnt is set to '0', it restores the default offered rate sensitivity behavior to all child policers and queues associated with the policy specified by tAdvCfgPolicyName.
U32 tAdvCfgSampleInterval	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.13	Unsigned32	read-create	The value of tAdvCfgSampleInterval specifies the interval for sampling the child's offered rate. A value of '1' of tAdvCfgSampleInterval represents fastest sampling rate available while a value of '8' represents slowest sampling period available. When tAdvCfgSampleInterval is set to '4', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
U32 tAdvCfgTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.27.6.1.12	Unsigned32	read-create	The value of tAdvCfgTimeAvgFactor is used the weight the new offered rate with a portion of the pervious offered rate. When tAdvCfgTimeAvgFactor is set to '0', time average factor adjustments to new offered rate measurements specified by tAdvCfgPolicyName are removed.
U32 tAtmTdpCdvt	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.12	Unsigned32	read-create	tAtmTdpCdvt identifies the Cell Delay Variation Tolerance in microseconds. The following default applies for Cdvt that is modifiable depending upon a given service category: Applicable Service Category Default Cdvt Value CBR/RT-VBR/NRT-VBR/UBR 250
U32 tAtmTdpMbs	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.4	Unsigned32	read-create	tAtmTdpMbs identifies the maximum burst size in cells. The default Mbs is determined by the Service Category. The following default applies to Mbs that is modifiable depending upon a given service category: Applicable Service Category Default Mbs Value RT-VBR 32 NRT-VBR 32
U32 tAtmTdpMir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.5	Unsigned32	read-create	tAtmTdpMir identifies the Minimum Information Rate in kilobits per second. The default Mir is determined by the Service Category. The following default applies for Mir that is modifiable depending upon a given service category: Applicable Service Category Default Mir Value UBR (with/without Mir) 0 Note that for the service categories given above, the value of Mir must be less than or equal to the value of Pir.
U32 tAtmTdpPir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.3	Unsigned32	read-create	tAtmTdpPir identifies the peak information rate in kilobits per second. The default Pir is determined by the Service Category. The following default applies to Pir that is modifiable depending upon a given service category: Applicable Service Category Default Pir Value UBR (with/without Mir) 4294967295 CBR 0 RT-VBR 0 NRT-VBR 0
U32 tAtmTdpSir	1.3.6.1.4.1.6527.3.1.2.16.21.1.1.2	Unsigned32	read-create	tAtmTdpSir identifies the sustained information rate in kilobits per second. The default Sir is determined by the Service Category. The following default applies to Sir that is modifiable depending upon a given service category: Applicable Service Category Default Sir Value RT-VBR 0 NRT-VBR 0 Note that for the service categories given above, the value of Sir must be less than or equal to the value of Pir.
U32 tHsmdaPoolClass1AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.15	Unsigned32	read-create	The value of tHsmdaPoolClass1AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass1Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass1Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.14	Unsigned32	read-create	The value of tHsmdaPoolClass1Parent specifies the root pool to which the first class pool will be associated.
U32 tHsmdaPoolClass2AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.17	Unsigned32	read-create	The value of tHsmdaPoolClass2AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass2Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass2Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.16	Unsigned32	read-create	The value of tHsmdaPoolClass2Parent specifies the root pool to which the second class pool will be associated.
U32 tHsmdaPoolClass3AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.19	Unsigned32	read-create	The value of tHsmdaPoolClass3AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass3Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass3Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.18	Unsigned32	read-create	The value of tHsmdaPoolClass3Parent specifies the root pool to which the third class pool will be associated.
U32 tHsmdaPoolClass4AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.21	Unsigned32	read-create	The value of tHsmdaPoolClass4AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass4Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass4Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.20	Unsigned32	read-create	The value of tHsmdaPoolClass4Parent specifies the root pool to which the fourth class pool will be associated.
U32 tHsmdaPoolClass5AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.23	Unsigned32	read-create	The value of tHsmdaPoolClass5AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass5Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass5Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.22	Unsigned32	read-create	The value of tHsmdaPoolClass5Parent specifies the root pool to which the fifth class pool will be associated.
U32 tHsmdaPoolClass6AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.25	Unsigned32	read-create	The value of tHsmdaPoolClass6AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass6Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass6Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.24	Unsigned32	read-create	The value of tHsmdaPoolClass6Parent specifies the root pool to which the sixth class pool will be associated.
U32 tHsmdaPoolClass7AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.27	Unsigned32	read-create	The value of tHsmdaPoolClass7AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass7Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass7Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.26	Unsigned32	read-create	The value of tHsmdaPoolClass7Parent specifies the root pool to which the seventh class pool will be associated.
U32 tHsmdaPoolClass8AllocPercent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.29	Unsigned32	read-create	The value of tHsmdaPoolClass8AllocPercent specifies, indirectly, the size of the first class pool. The specified percentage, in hundredths of a percent, determines what percentage of the root pool with which it is associated, as specified by tHsmdaPoolClass8Parent, will be available to this class. The sum of the class pool percentages for a root pool may exceed 100 percent(10000 hundredths of a percent), allowing the root pool to be oversubscribed. The sum of the class pool percentages for a root pool may also total less than 100 percent, allowing the root pool to be undersubscribed.
U32 tHsmdaPoolClass8Parent	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.28	Unsigned32	read-create	The value of tHsmdaPoolClass8Parent specifies the root pool to which the eigth class pool will be associated.
U32 tHsmdaPoolSystemReserve	1.3.6.1.4.1.6527.3.1.2.16.22.3.1.5	Unsigned32	read-create	The value of tHsmdaPoolSystemReserve specifies the percentage of HSMDA buffers that will be reserved for internal system use. When this value is set, all the provisioned buffer pool allocation sizes will be re-evaluated. This includes the port class allocations specified by indirectly by tmnxPortIngPoolPercentRate and tmnxPortEgrPoolPercentRate, and class and root pools specified indirectly by tHsmdaPoolClass1AllocPercent through tHsmdaPoolClass8AllocPercent and tHsmdaPoolRoot1AllocWeight through tHsmdaPoolRoot8AllocWeight.
U32 tHsmdaSlopeHiMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.8	Unsigned32	read-create	The value of tHsmdaSlopeHiMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tHsmdaSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.9	Unsigned32	read-create	The value of tHsmdaSlopeHiMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeHiMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeHiStartDepth up to the tHsmdaSlopeHiMaxProbability at the tHsmdaSlopeHiMaxDepth.
U32 tHsmdaSlopeHiStartDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.7	Unsigned32	read-create	The value of tHsmdaSlopeHiStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tHsmdaSlopeLoMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.12	Unsigned32	read-create	The value of tHsmdaSlopeLoMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tHsmdaSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.13	Unsigned32	read-create	The value of tHsmdaSlopeLoMaxProbability specifies the drop probability, as a percentage, when the Hsmda queue depth reaches tHsmdaSlopeLoMaxDepth. The drop increases steadily from 0 at the tHsmdaSlopeLoStartDepth up to the tHsmdaSlopeLoMaxProbability at the tHsmdaSlopeLoMaxDepth.
U32 tHsmdaSlopeLoStartDepth	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.11	Unsigned32	read-create	The value of tHsmdaSlopeLoStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tHsmdaSlopeQueueMbs	1.3.6.1.4.1.6527.3.1.2.16.10.2.1.5	Unsigned32	read-create	The value of tHsmdaSlopeQueueMbs specifies the maximum amount of buffer space, in bytes, allowed for any HSMDA queue associated with this HSMDA slope policy. Specifying a value of 0 effectively disables all queues associated with this slope policy causing each queue to discard all packets. This object is obsoleted in 10.0 Release.
U32 tMcFrEgrClassMaxSize	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.4	Unsigned32	read-write	The value of tMcFrEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcFrEgrClassIndex value. Currently only four multi-class classes are supported per profile.
U32 tMcFrEgrClassMir	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.2	Unsigned32	read-write	The value of tMcFrEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
U32 tMcFrEgrClassWeight	1.3.6.1.4.1.6527.3.1.2.16.26.3.1.3	Unsigned32	read-write	The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. Currently only four multi-class classes are supported per profile.
U32 tMcFrIngrClassReassemblyTmout	1.3.6.1.4.1.6527.3.1.2.16.25.2.1.2	Unsigned32	read-write	The value of tMcFrIngrClassReassemblyTmout specifies the reassembly timeout for a specific frame-relay multi-class ingress class. Currently only four multi-class classes are supported per profile.
U32 tMcMlpppEgrClassMaxSize	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.4	Unsigned32	read-write	The value of tMcMlpppEgrClassMaxSize specifies the buffer queue size. The default buffer size is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Max Size 0 25 1 5 2 200 3 1000
U32 tMcMlpppEgrClassMir	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.2	Unsigned32	read-write	The value of tMcMlpppEgrClassMir specifies the Minimum Information Rate given as a percentage. A value of zero represents this object is not applicable for this class. The default Mir is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Mir Value 0 100 1 85 2 0 3 0
U32 tMcMlpppEgrClassWeight	1.3.6.1.4.1.6527.3.1.2.16.24.3.1.3	Unsigned32	read-write	The value of tMcMlpppEgrClassWeight specifies the weight of this multiclass class given as a percentage. A value of zero represents this object is not applicable for this class. The default Weight is determined by the tMcMlpppEgrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppEgrClassIndex Default Weight Value 0 0 1 0 2 66 3 33
U32 tMcMlpppEgrFCClass	1.3.6.1.4.1.6527.3.1.2.16.24.4.1.2	Unsigned32	read-write	The value of tMcMlpppEgrFCClass specifies the mlppp multi-class class for the per-forwarding-class specified. The default class value is determined by the Forwarding Class Name. Forwarding Class Name Mlppp Class Value be 3 l2 2 af 2 l1 2 h2 2 ef 1 h1 0 nc 0
U32 tMcMlpppIngrClassReassemblyTmout	1.3.6.1.4.1.6527.3.1.2.16.23.2.1.2	Unsigned32	read-write	The value of tMcMlpppIngrClassReassemblyTmout specifies the reassembly timeout for a specific mlppp multi-class ingress class. The default reassembly timeout value is determined by the tMcMlpppIngrClassIndex value. Currently only four multi-class classes are supported per profile. tMcMlpppIngrClassIndex Default Reassembly Value 0 10 1 10 2 100 3 1000
U32 tNamedPoolPolicyQ1DefaultWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.5	Unsigned32	read-create	The value of tNamedPoolPolicyQ1DefaultWeight specifies the port allocation weight given to the default pools.
U32 tNamedPoolPolicyQ1MdaWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.6	Unsigned32	read-create	The value of tNamedPoolPolicyQ1MdaWeight specifies the port allocation weight given to the MDA named pools.
U32 tNamedPoolPolicyQ1PortWeight	1.3.6.1.4.1.6527.3.1.2.16.22.1.1.7	Unsigned32	read-create	The value of tNamedPoolPolicyQ1PortWeight specifies the port allocation weight given to the local port named pools.
U32 tNetworkEgrHsmdaQueuePIRPercent	1.3.6.1.4.1.6527.3.1.2.16.6.4.1.2	Unsigned32	read-write	The value of tNetworkEgrHsmdaQueuePIRPercent specifies the queue's PIR expressed as a percentage of port line rate.
U32 tNetworkQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.6.2.1.22	Unsigned32	read-create	The value of tNetworkQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
U32 tQ1NamedPoolAccessAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.7	Unsigned32	read-create	The value of tQ1NamedPoolAccessAllocWeight specifies the weight used to divide access associated buffer space between named pools.
U32 tQ1NamedPoolNetworkAllocWeight	1.3.6.1.4.1.6527.3.1.2.16.22.2.1.6	Unsigned32	read-create	The value of tQ1NamedPoolNetworkAllocWeight specifies the weight used to divide network associated buffer space between named pools.
U32 tQosEgrPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.20	Unsigned32	read-create	The value of tQosEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tQosEgrPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.21	Unsigned32	read-create	The value of tQosEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosEgrPolicerSlopeStartDepth up to the tQosEgrPolicerSlopeMaxProb at the tQosEgrPolicerSlopeMaxDepth.
U32 tQosEgrPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.27.5.1.18	Unsigned32	read-create	The value of tQosEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tQosEgrQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.29	Unsigned32	read-create	The value of tQosEgrQueueAdminCIRPercent specifies the administrative CIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminCIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
U32 tQosEgrQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.7.7.1.28	Unsigned32	read-create	The value of tQosEgrQueueAdminPIRPercent specifies the administrative PIR percentage, in hudredths of a percent. An 'inconsistentValue' error is returned if tQosEgrQueueAdminPIRPercent is set to non-default value when the object tQosEgrQueueRateType is set to 'kbps'.
U32 tQosIngPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.19	Unsigned32	read-create	The value of tQosIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tQosIngPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.20	Unsigned32	read-create	The value of tQosIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tQosIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tQosIngPolicerSlopeStartDepth up to the tQosIngPolicerSlopeMaxProb at the tQosIngPolicerSlopeMaxDepth.
U32 tQosIngPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.27.4.1.18	Unsigned32	read-create	The value of tQosIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSapEgressHsmdaLowBrstMaxCls	1.3.6.1.4.1.6527.3.1.2.16.4.1.1.9	Unsigned32	read-create	The value of tSapEgressHsmdaLowBrstMaxCls specifies which class should use the low priority burst threshold. All classes starting from 1, up to and including that specified by tSapEgressHsmdaLowBrstMaxCls use the low priority burst threshold. All classes greater than the value of tSapEgressHsmdaLowBrstMaxCls up to and including class 8 use the high priority burst threshold.
U32 tSapEgressQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.32	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminCIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
U32 tSapEgressQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.31	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgressQueueAdminPIRPercent is set to non-default value when the object tSapEgressQueueRateType is set to 'kbps'.
U32 tSapEgressQueuePortAvgOverhead	1.3.6.1.4.1.6527.3.1.2.16.4.2.1.24	Unsigned32	read-create	The value of tSapEgressQueuePortAvgOverhead specifies the encapsulation overhead, in hundredths of a percent, used to translate packet-based rate to frame-based rate and vice versa.
U32 tSapEgrIPCritIndex	1.3.6.1.4.1.6527.3.1.2.16.4.7.1.2	Unsigned32	not-accessible	The value of tSapEgrIPCritIndex specifies the index for a sap-egress IP or IPv6 criteria entry.
U32 tSapEgrPolicerAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.18	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminCIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
U32 tSapEgrPolicerAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.17	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapEgrPolicerAdminPIRPercent is set to non-default value when the object tSapEgrPolicerRateType is set to 'kbps'.
U32 tSapEgrPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.21	Unsigned32	read-create	The value of tSapEgrPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSapEgrPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.22	Unsigned32	read-create	The value of tSapEgrPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapEgrPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapEgrPolicerSlopeStartDepth up to the tSapEgrPolicerSlopeMaxProb at the tSapEgrPolicerSlopeMaxDepth.
U32 tSapEgrPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.4.8.1.20	Unsigned32	read-create	The value of tSapEgrPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSapIngPolicerAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.18	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminCIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
U32 tSapIngPolicerAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.17	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngPolicerAdminPIRPercent is set to non-default value when the object tSapIngPolicerRateType is set to 'kbps'.
U32 tSapIngPolicerSlopeMaxDepth	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.21	Unsigned32	read-create	The value of tSapIngPolicerSlopeMaxDepth specifies the percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSapIngPolicerSlopeMaxProb	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.22	Unsigned32	read-create	The value of tSapIngPolicerSlopeMaxProb specifies the drop probability, as a percentage, when the queue depth reaches tSapIngPolicerSlopeMaxDepth. The drop increases steadily from 0 at the tSapIngPolicerSlopeStartDepth up to the tSapIngPolicerSlopeMaxProb at the tSapIngPolicerSlopeMaxDepth.
U32 tSapIngPolicerSlopeStartDepth	1.3.6.1.4.1.6527.3.1.2.16.3.12.1.20	Unsigned32	read-create	The value of tSapIngPolicerSlopeStartDepth specifies the percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSapIngressQueueAdminCIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.26	Unsigned32	read-create	The administrative CIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminCIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
U32 tSapIngressQueueAdminPIRPercent	1.3.6.1.4.1.6527.3.1.2.16.3.2.1.25	Unsigned32	read-create	The administrative PIR percentage, in hundredths of a percent. An 'inconsistentValue' error is returned if tSapIngressQueueAdminPIRPercent is set to non-default value when the object tSapIngressQueueRateType is set to 'kbps'.
U32 tSlopeHiMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.6	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeHiMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.7	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeHiStartAverage upto the tSlopeHiMaxProbability at the tSlopeHiMaxAverage.
U32 tSlopeHiStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.5	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSlopeLoMaxAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.10	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability is 100 percent. This implies that all packets beyond this point will be dropped.
U32 tSlopeLoMaxProbability	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.11	Unsigned32	read-create	The drop probability increases steadily from 0 at the tSlopeLoStartAverage upto the tSlopeLoMaxProbability at the tSlopeLoMaxAverage.
U32 tSlopeLoStartAverage	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.9	Unsigned32	read-create	The percentage of the buffer utilized after which the drop probability starts to rise above 0.
U32 tSlopeTimeAvgFactor	1.3.6.1.4.1.6527.3.1.2.16.10.1.1.12	Unsigned32	read-create	The time average factor describes the weighting between the previous shared buffer average utilization result and the new shared buffer utilization in determining the new shared buffer average utilization.
No type (247)
tAdvCfgPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.27.6.1		not-accessible	Each row represents a particular configuration policy. Entries are created and deleted by the user.
tAdvCfgPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.27.6		not-accessible	The tAdvCfgPolicyTable has an entry for each configuration policy for queue and policer parameters configured on this system.
tAtmTdpEntry	1.3.6.1.4.1.6527.3.1.2.16.21.1.1		not-accessible	This list contains ATM traffic descriptor objects and the associated parameters. All objects that do not apply to a given service category are given default values of zero.
tAtmTdpObjects	1.3.6.1.4.1.6527.3.1.2.16.21
tAtmTdpTable	1.3.6.1.4.1.6527.3.1.2.16.21.1		not-accessible	This table contains information on ATM traffic descriptors for controlling ATM traffic management capabilities.
tDSCPNameEntry	1.3.6.1.4.1.6527.3.1.2.16.1.1.1		not-accessible	Information about a particular DSCP Name, particularly the DSCP value. It maps a DSCP Name into a DSCP value. Some default entries are created by the agent. Default entries have tDSCPNameStorageType permanent, and can not be deleted. Entries cannot be created by user but may be supported later. An attempt to create a row in this table would return no creation.
tDSCPNameTable	1.3.6.1.4.1.6527.3.1.2.16.1.1		not-accessible	A list of all DSCP Names. DSCP Name entries must exist here and be active before they can be referenced elsewhere (e.g. IP filter).
tDSCPObjects	1.3.6.1.4.1.6527.3.1.2.16.1
tFCNameEntry	1.3.6.1.4.1.6527.3.1.2.16.2.1.1		not-accessible	Information about a particular Forwarding Class Name, particularly the Forwarding Class value. Some default entries are created by the agent. Default entries have tFCStorageType permanent, and can not be deleted. Entries cannot be created by user but maybe supported in future. An attempt to create a row in this table would return no creation.
tFCNameTable	1.3.6.1.4.1.6527.3.1.2.16.2.1		not-accessible	A list of all Forwarding Class Names. Forwarding Class Name entries must exist here and be active before they can be referenced elsewhere (e.g. qos queue).
tFCObjects	1.3.6.1.4.1.6527.3.1.2.16.2
tHsmdaPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.3.1		not-accessible	Each row represents a particular HSMDA pool policy. Entries are created and deleted by the user.
tHsmdaPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.3		not-accessible	The tHsmdaPoolPolicyTable has an entry for each HSMDA pool policy configured on this system.
tHsmdaSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.4.1		not-accessible	Each row represents a particular HSMDA scheduler policy. Entries are created and deleted by the user.
tHsmdaSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.4		not-accessible	The tHsmdaSchedulerPlcyTable has an entry for each HSMDA scheduler policy configured on this system.
tHsmdaSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.2.1		not-accessible	Each row represents a particular HSMDA slope policy. Entries are created and deleted by the user.
tHsmdaSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.2		not-accessible	The tHsmdaSlopePolicyTable has an entry for each HSMDA slope policy configured on this system.
tHsmdaWrrPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.28.1.1		not-accessible	Each row in tHsmdaWrrPolicyEntry represents a HSMDA Weighted Round Robin (WRR) policy specified by tHsmdaWrrPolicyName.
tHsmdaWrrPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.28.1		not-accessible	The tHsmdaWrrPolicyTable contains the information of the Weighted Round Robin (WRR) policies configured on HSDMA queues.
timetraQosMIBModule	1.3.6.1.4.1.6527.1.1.3.16			This document is the SNMP MIB module to manage and provision Quality of Service features on Alcatel-Lucent SROS systems. Copyright 2003-2014 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tMcFrEgrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.26.3.1		not-accessible	Each entry contains information about a particular frame-relay egress multi-class class per multi-class frame-relay egress profile. Entries are created/destroyed as each tMcFrEgrProfEntry is created/destroyed.
tMcFrEgrClassTable	1.3.6.1.4.1.6527.3.1.2.16.26.3		not-accessible	The tMcFrEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
tMcFrEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.26
tMcFrEgrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.26.1.1		not-accessible	Each row entry contains information about a particular egress multi-class frame-relay profile. Multi-class frame-relay egress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
tMcFrEgrProfTable	1.3.6.1.4.1.6527.3.1.2.16.26.1		not-accessible	The tMcFrEgrProfTable has an entry for each egress multi-class frame-relay profile configured in the system.
tMcFrIngrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.25.2.1		not-accessible	Each entry contains information about a particular frame-relay ingress multi-class class per frame-relay ingress profile. Entries are created/destroyed as each tMcFrIngrProfEntry is created/destroyed.
tMcFrIngrClassTable	1.3.6.1.4.1.6527.3.1.2.16.25.2		not-accessible	The tMcFrIngrClassTable has an entry for each multi-class frame-relay ingress class per multi-class frame-relay ingress profile in the system.
tMcFrIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.25
tMcFrIngrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.25.1.1		not-accessible	Each row entry contains information about a particular ingress multi-class frame-relay profile. Multi-class frame-relay ingress profile 1 is created by the agent. It cannot be modified/deleted. Other entries are created by the user.
tMcFrIngrProfTable	1.3.6.1.4.1.6527.3.1.2.16.25.1		not-accessible	The tMcFrIngrProfTable has an entry for each ingress multi-class frame-relay profile configured in the system.
tMcMlpppEgrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.24.3.1		not-accessible	Each entry contains information about a particular mlppp egress multi-class class per mlppp multi-class mlppp egress profile. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
tMcMlpppEgrClassTable	1.3.6.1.4.1.6527.3.1.2.16.24.3		not-accessible	The tMcMlpppEgrClassTable has an entry for each multiclass mlppp egress profile in the system.
tMcMlpppEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.24
tMcMlpppEgrFCEntry	1.3.6.1.4.1.6527.3.1.2.16.24.4.1		not-accessible	Each entry contains information about all egress FC Mappings to multi-class mlppp classes. Entries are created/destroyed as each tMcMlpppEgrProfEntry is created/destroyed.
tMcMlpppEgrFCTable	1.3.6.1.4.1.6527.3.1.2.16.24.4		not-accessible	The tMcMlpppEgrFCTable has an entry for all egress FC Mappings to multi-class mlppp classes.
tMcMlpppEgrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.24.1.1		not-accessible	Each row entry contains information about a particular egress multi-class mlppp profile. Multi-class mlppp egress profiles 1,2 and 3 are created by the agent. They cannot be deleted. Other entries are created by the user.
tMcMlpppEgrProfTable	1.3.6.1.4.1.6527.3.1.2.16.24.1		not-accessible	The tMcMlpppEgrProfTable has an entry for each egress multi-class mlppp profile configured in the system.
tMcMlpppIngrClassEntry	1.3.6.1.4.1.6527.3.1.2.16.23.2.1		not-accessible	Each entry contains information about a particular mlppp ingress multi-class class per mlppp ingress profile. Entries are created/destroyed as each tMcMlpppIngrProfEntry is created/destroyed.
tMcMlpppIngrClassTable	1.3.6.1.4.1.6527.3.1.2.16.23.2		not-accessible	The tMcMlpppIngrClassTable has an entry for each multi-class mlppp ingress class per multi-class mlppp ingress profile in the system.
tMcMlpppIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.23
tMcMlpppIngrProfEntry	1.3.6.1.4.1.6527.3.1.2.16.23.1.1		not-accessible	Each row entry contains information about a particular ingress multi-class mlppp profile. Multi-class mlppp ingress profile 1 is created by the agent. It cannot be deleted. Other entries are created by the user.
tMcMlpppIngrProfTable	1.3.6.1.4.1.6527.3.1.2.16.23.1		not-accessible	The tMcMlpppIngrProfTable has an entry for each ingress multi-class mlppp profile configured in the system.
tmnxQos7450V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.17			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R10.0.
tmnxQos7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.4			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R4.0.
tmnxQos7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.6			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R5.0.
tmnxQos7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.8			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.0.
tmnxQos7450V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.10			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
tmnxQos7450V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.12			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R6.1.
tmnxQos7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.14			The compliance statement for management of QOS features on Alcatel-Lucent 7450 ESS series systems release R8.0.
tmnxQos7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.5			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R4.0.
tmnxQos7750V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.7			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R5.0.
tmnxQos7750V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.9			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.0.
tmnxQos77x0V10v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.18			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R10.0.
tmnxQos77x0V6v1Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.11			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R6.1.
tmnxQos77x0V7v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.13			The compliance statement for management of QOS features on Alcatel-Lucent 7750 SROS series systems release R6.1.
tmnxQos77x0V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.15			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R8.0.
tmnxQos77x0V9v0Compliance	1.3.6.1.4.1.6527.3.1.1.16.1.16			The compliance statement for management of QOS features on Alcatel-Lucent SROS series systems release R9.0.
tmnxQosAdvConfigV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.64			The group of objects supporting management of QoS policer and queue advanced configuration parameters on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosAtmTdpV3v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.15			The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 3.0.
tmnxQosAtmTdpV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.24			The group of objects for ATM Traffic Descriptor Profiles on Alcatel-Lucent SROS series systems release 5.0.
tmnxQosAtmTdpV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.55			The group of objects for ATM Traffic Descriptor Profiles added in release 9.0 of SROS.
tmnxQosBurstLimitGroup	1.3.6.1.4.1.6527.3.1.1.16.2.50			The group of objects supporting Burst-size management objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosCompliances	1.3.6.1.4.1.6527.3.1.1.16.1
tmnxQosConformance	1.3.6.1.4.1.6527.3.1.1.16
tmnxQosDSCPGroup	1.3.6.1.4.1.6527.3.1.1.16.2.2			The group of objects supporting management of Differential Services Code Points on Alcatel-Lucent SROS series systems.
tmnxQosEgrReClassifyV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.62			The group of objects supporting management of QoS Egress policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.3			The group of objects supporting management of Forwarding Classes on Alcatel-Lucent SROS series systems.
tmnxQosFrameBasedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.28			The group of objects supporting management of frame-based queue accounting on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosGlobalGroup	1.3.6.1.4.1.6527.3.1.1.16.2.1			The group of objects supporting general management of QOS features on Alcatel-Lucent SROS series systems.
tmnxQosGroups	1.3.6.1.4.1.6527.3.1.1.16.2
tmnxQosHsmdaObsoletedV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.69			The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosHsmdaObsoletedV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.59			The group of objects obsoleted supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosHsmdaV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.65			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosHsmdaV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.23			The group of objects supporting management of QoS policies for HSMDA MDAs on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosHsmdaV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.36			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 7.0.
tmnxQosHsmdaV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.56			The group of objects supporting management of QoS policies for QMDA MDAs on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosMacCritVidFltrV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.51			The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosMcFrEgrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.39			The group of objects for the multi-class Fr egress information on Alcatel-Lucent SROS series systems.
tmnxQosMcFrIngrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.38			The group of objects for the multi-class Fr ingress information on Alcatel-Lucent SROS series systems.
tmnxQosMcMlpppEgrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.32			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosMcMlpppIngrGroup	1.3.6.1.4.1.6527.3.1.1.16.2.31			The group of objects for the multi-class mlppp ingress information on Alcatel-Lucent SROS series systems.
tmnxQosNamedPoolPolicyV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.30			The group of objects for the named pool policy on Alcatel-Lucent SROS series systems.
tmnxQosNamedPoolV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.58			The group of objects supporting management of Network Named Pool policies on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosNetworkR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.13			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.66			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosNetworkV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.22			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.27			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.35			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosNetworkV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.57			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosObsoletedV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.29			The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosObsoletedV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.47			The group of obsolete objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosPolicerSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.63			The group of objects supporting management of QoS policer slope on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosPolicerV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.42			The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 8.0.
tmnxQosPolicerV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.54			The group of objects supporting management of Policer specific objects on Alcatel-Lucent SROS series systems release 9.0.
tmnxQosPolicyV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.60			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosPortSchPlcyGrpGroup	1.3.6.1.4.1.6527.3.1.1.16.2.48			The group of objects supporting Port Scheduler Policy Group objects for the QoS on Alcatel-Lucent SROS series systems.
tmnxQosQueueGrpPolcrV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.61			The group of objects supporting management of Network QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosQueueObjGroup	1.3.6.1.4.1.6527.3.1.1.16.2.33			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosQueueObjV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.46			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tmnxQosQueueV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.18			The group of objects supporting management of QoS queue policies on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSapAtmV7v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.37			The group of objects supporting management of SAP ATM related QoS policies for Alcatel-Lucent SROS series systems release 7.0.
tmnxQosSapEgressR2r1Group	1.3.6.1.4.1.6527.3.1.1.16.2.12			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.21			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.26			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.45			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems.
tmnxQosSapEgressV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.52			The group of objects supporting management of SAP egress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosSapEgrQWredGroup	1.3.6.1.4.1.6527.3.1.1.16.2.40			The group of objects for the WRED specific SAP egress queue information on Alcatel-Lucent SROS series systems.
tmnxQosSapIngressV10v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.68			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 10.0.
tmnxQosSapIngressV4v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.19			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSapIngressV6v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.25			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 6.0.
tmnxQosSapIngressV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.41			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems release 8.0.
tmnxQosSapIngressV9v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.53			The group of objects supporting management of SAP ingress QoS policies on Alcatel-Lucent SROS series systems 9.0 release.
tmnxQosSapIpv6FilterR4r0Group	1.3.6.1.4.1.6527.3.1.1.16.2.16			The group of objects for Qos Policies related to IPv6 on Alcatel-Lucent SROS series systems release 4.0.
tmnxQosSchedulerGroup	1.3.6.1.4.1.6527.3.1.1.16.2.8			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSchedulerV5v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.20			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSchedulerV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.49			The group of objects supporting management of Scheduler policies on Alcatel-Lucent SROS series systems.
tmnxQosSlopeGroup	1.3.6.1.4.1.6527.3.1.1.16.2.7			The group of objects supporting management of Slope policies on Alcatel-Lucent SROS series systems.
tNamedPoolPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.22.1.1		not-accessible	This list contains Named buffer pools policy related information.
tNamedPoolPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.22.1		not-accessible	This table contains information on Named buffer pools policy.
tNetworkEgressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.9.1		not-accessible	The tNetworkEgressDSCPEntry defines a particular DSCP entry for a network egress policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. In the event that one policy has multiple entries, and the tNetworkEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tNetworkEgressDSCP).
tNetworkEgressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.9		not-accessible	tNetworkEgressDSCPTable lists all DSCP entries for all network egress policies.
tNetworkEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.7.1		not-accessible	Information about a particular network policy's egress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tNetworkEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.7		not-accessible	Information about all network policies' egress FC traffic disposition.
tNetworkEgressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.5.10.1		not-accessible	The tNetworkEgressPrecEntry defines a particular network egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user.
tNetworkEgressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.5.10		not-accessible	The tNetworkEgressPrecTable table maintains the mapping of a particular precedence value into a forwarding class
tNetworkEgrHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.4.1		not-accessible	Each entry in tNetworkEgrHsmdaQueueEntry represents the information about a particular HSMDA queue for a network egress policy specified by tNetworkEgrHsmdaQueue.
tNetworkEgrHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.4		not-accessible	The tNetworkEgrHsmdaQueueTable contains the information about all network egress policies on HSMDA queues. Entries in this table are created whenever a network queue policy is created in tNetworkQueuePolicyEntry.
tNetworkIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.5.3.1		not-accessible	Information about a dot1p map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tNetworkIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.5.3		not-accessible
tNetworkIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.2.1		not-accessible	Information about a dscp map for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tNetworkIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.5.2		not-accessible
tNetworkIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.5.8.1		not-accessible	Information about a particular network policy's ingress per-forwarding-class traffic disposition. Entries are created/deleted as an action of creating/deleting a row in the tNetworkPolicyTable. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tNetworkIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.5.8		not-accessible	Information about all network policies' ingress FC traffic disposition.
tNetworkIngressLSPEXPEntry	1.3.6.1.4.1.6527.3.1.2.16.5.4.1		not-accessible	Information about LSP EXP mapping for a network policy. Some default entries are created by the agent for the default network policy (1). These cannot be deleted or modified. Other entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tNetworkIngressLSPEXPTable	1.3.6.1.4.1.6527.3.1.2.16.5.4		not-accessible
tNetworkObjects	1.3.6.1.4.1.6527.3.1.2.16.5
tNetworkPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.5.1.1		not-accessible	Information about a particular Network Policy. network policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. The default Egress FC entries are created as an action of setting the rowstatus.
tNetworkPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.5.1		not-accessible
tNetworkQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.6.2.1		not-accessible
tNetworkQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.6.3.1		not-accessible
tNetworkQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.6.3		not-accessible
tNetworkQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.6
tNetworkQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.6.1.1		not-accessible
tNetworkQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.6.1		not-accessible
tNetworkQueueTable	1.3.6.1.4.1.6527.3.1.2.16.6.2		not-accessible
tPoolObjects	1.3.6.1.4.1.6527.3.1.2.16.22
tPortSchedulerPlcyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.3.1		not-accessible	Each row represents a particular port scheduler. Entries are created and deleted by the user.
tPortSchedulerPlcyTable	1.3.6.1.4.1.6527.3.1.2.16.12.3		not-accessible	The tPortSchedulerPlcyTable has an entry for each port scheduler configured on this system.
tPortSchPlcyGrpEntry	1.3.6.1.4.1.6527.3.1.2.16.12.5.1		not-accessible	Each row represents a particular port scheduler group. Entries are created and deleted by the user.
tPortSchPlcyGrpTable	1.3.6.1.4.1.6527.3.1.2.16.12.5		not-accessible	The tPortSchPlcyGrpTable has an entry for each port scheduler group configured on this system.
tPortSchPlcyLvlGrpEntry	1.3.6.1.4.1.6527.3.1.2.16.12.6.1		not-accessible	Each row represents a particular port scheduler specific priority level group information.
tPortSchPlcyLvlGrpTable	1.3.6.1.4.1.6527.3.1.2.16.12.6		not-accessible	The tPortSchPlcyLvlGrpTable has an entry for each port scheduler configured on this system for priority level group objects.
tQ1NamedPoolEntry	1.3.6.1.4.1.6527.3.1.2.16.22.2.1		not-accessible	This list contains Q1 pools policy related information.
tQ1NamedPoolTable	1.3.6.1.4.1.6527.3.1.2.16.22.2		not-accessible	This table contains information on Q1 pools policy.
tQosEgrPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.27.5.1		not-accessible	tQosEgrPolicerEntry defines an entry in the tQosEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosEgrPolicerRowStatus.
tQosEgrPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.27.5		not-accessible	tQosEgrPolicerTable defines QOS egress Policer Table for providing, via SNMP, the capability of defining the policers in the egress queue groups. tQosEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within Qos policies.
tQosEgrQGroupEntry	1.3.6.1.4.1.6527.3.1.2.16.7.6.1		not-accessible	tQosEgrQGroupEntry defines an entry in the tQosEgrQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosEgrQGroupRowStatus.
tQosEgrQGroupFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.8.1		not-accessible	Information about a particular queue group's forwarding class.
tQosEgrQGroupFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.8		not-accessible	This table maintains the information of forwarding classes in a egress queue group.
tQosEgrQGroupTable	1.3.6.1.4.1.6527.3.1.2.16.7.6		not-accessible	tQosEgrQGroupTable defines the Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosEgrQueueTable. tQosEgrQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
tQosEgrQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.7.1		not-accessible	tQosEgrQueueEntry defines a particular egress queue. Entries are created and deleted by user.
tQosEgrQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.7		not-accessible	tQosEgrQueueTable defines all egress queues.
tQosFCQGrpFC8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.44			The group of objects for the SAP egress information on Alcatel-Lucent SROS series systems.
tQosIngPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.27.4.1		not-accessible	tQosIngPolicerEntry defines an entry in the tQosIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tQosIngPolicerRowStatus.
tQosIngPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.27.4		not-accessible	tQosIngPolicerTable defines QOS Ingress Policer Table for providing, via SNMP, the capability of defining the policers in the ingress queue groups. tQosIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the Qos policies.
tQosIngQGroupEntry	1.3.6.1.4.1.6527.3.1.2.16.7.4.1		not-accessible	tQosIngQGroupEntry defines an entry in the tQosIngQGroupTable. Entries are created/deleted in this table by SNMP sets to tQosIngQGroupRowStatus.
tQosIngQGroupTable	1.3.6.1.4.1.6527.3.1.2.16.7.4		not-accessible	tQosIngQGroupTable defines Ingress Queue Group Table for providing, via SNMP, the capability of defining the queue groups for the queues existing in the tQosIngQueueTable. tQosIngQGroupTable holds a list of all the queue-groups in the managed system defined. Queue-groups should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
tQosIngQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.5.1		not-accessible	tQosIngQueueEntry defines a particular ingress queue. Entries are created by user by setting tQosIngQueueRowStatus.
tQosIngQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.5		not-accessible	tQosIngQueueTable defines all ingress queues.
tQosNotifications	1.3.6.1.4.1.6527.3.1.3.16.0
tQosNotifyPrefix	1.3.6.1.4.1.6527.3.1.3.16
tQosObjects	1.3.6.1.4.1.6527.3.1.2.16
tQosObsoleteObjectsGroup	1.3.6.1.4.1.6527.3.1.1.16.2.10			The group of obsolete objects in the TIMETRA-QOS-MIB.
tQosPolicerArbiterEntry	1.3.6.1.4.1.6527.3.1.2.16.27.3.1		not-accessible	tQosPolicerArbiterEntry defines a particular policy arbiter for a specific QoS policer control policy on a given tier. Entries are created and deleted by user.
tQosPolicerArbiterTable	1.3.6.1.4.1.6527.3.1.2.16.27.3		not-accessible	tQosPolicerArbiterTable defines policy arbiters for all policer control policies.
tQosPolicerCtrlPolEntry	1.3.6.1.4.1.6527.3.1.2.16.27.1.1		not-accessible	tQosPolicerCtrlPolEntry defines a particular egress queue. Entries are created and deleted by user.
tQosPolicerCtrlPolTable	1.3.6.1.4.1.6527.3.1.2.16.27.1		not-accessible	tQosPolicerCtrlPolTable defines all egress queues.
tQosPolicerLevelEntry	1.3.6.1.4.1.6527.3.1.2.16.27.2.1		not-accessible	tQosPolicerLevelEntry defines a specific level of QoS policer control policy defined by tQosPolicerCtrlPolTable. Entries are created and deleted by the system when QoS policer control policy is created and deleted.
tQosPolicerLevelTable	1.3.6.1.4.1.6527.3.1.2.16.27.2		not-accessible	tQosPolicerLevelTable defines all levels of QoS Policer control policy defined by tQosPolicerCtrlPolTable.
tQosPolicerObjects	1.3.6.1.4.1.6527.3.1.2.16.27
tQosQGrpFCGroup	1.3.6.1.4.1.6527.3.1.1.16.2.34			The group of objects for the multi-class mlppp egress information on Alcatel-Lucent SROS series systems.
tQosQGrpV8v0Group	1.3.6.1.4.1.6527.3.1.1.16.2.43			The group of objects supporting the management of QOS Queue Groups on Alcatel-Lucent SROS series systems release 8.0.
tQosTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.16.20
tSapEgressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.4.10.1		not-accessible	Information about a particular dot1p match for a sap-egress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapEgressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.4.10		not-accessible	A table that contains the list of all dot1p entries for all sap-egress policies.
tSapEgressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.4.5.1		not-accessible	Information about a particular DSCP entry for a sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapEgressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapEgressDSCP).
tSapEgressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.4.5		not-accessible	a list of all DSCP entries for all sap-egress policies.
tSapEgressEntry	1.3.6.1.4.1.6527.3.1.2.16.4.1.1		not-accessible	Information about a particular sap-egress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. the default sap-egress policy (1) cannot be changed or destroyed.
tSapEgressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.4.3.1		not-accessible	Information about a particular sap-egress policy's forwarding class mappings to queues and dot1p values. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapEgressFCTable	1.3.6.1.4.1.6527.3.1.2.16.4.3		not-accessible
tSapEgressHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.4.1		not-accessible	Information about a particular HSMDA queue for a sap-egress policy. Entries are created by user.
tSapEgressHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.4		not-accessible	Information about all sap-egress policies' HSMDA queues.
tSapEgressObjects	1.3.6.1.4.1.6527.3.1.2.16.4
tSapEgressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.4.6.1		not-accessible	Information about a particular sap-egress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
tSapEgressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.4.6		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
tSapEgressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.4.2.1		not-accessible	Information about a particular sap-egress queue. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapEgressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.4.2		not-accessible	information about all sap-egress policies' queues.
tSapEgressTable	1.3.6.1.4.1.6527.3.1.2.16.4.1		not-accessible	information about all sap-egress policies.
tSapEgrIPCritEntry	1.3.6.1.4.1.6527.3.1.2.16.4.7.1		not-accessible	Information about a particular egress IP or IPv6 matching criteria entry. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
tSapEgrIPCritTable	1.3.6.1.4.1.6527.3.1.2.16.4.7		not-accessible	This table maintains the entries for matching criteria for IP packets on egress. In release 10.0 and higher, this table can also contain IPv6 criteria.
tSapEgrPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.4.8.1		not-accessible	tSapEgrPolicerEntry defines an entry in the tSapEgrPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapEgrPolicerRowStatus.
tSapEgrPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.4.8		not-accessible	tSapEgrPolicerTable defines SAP Egress Policer Table for providing, via SNMP, the capability of defining the policers. tSapEgrPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapEgressFCTable.
tSapEgrPolicyNameEntry	1.3.6.1.4.1.6527.3.1.2.16.4.9.1		not-accessible	Basic information about a specific SAP egress policy name.
tSapEgrPolicyNameTable	1.3.6.1.4.1.6527.3.1.2.16.4.9		not-accessible	A table that contains SAP egress policy name information. Entries are created automatically by the system when tSapEgressPolicyName object is set for the SAP egress policy.
tSapIngPolicerEntry	1.3.6.1.4.1.6527.3.1.2.16.3.12.1		not-accessible	tSapIngPolicerEntry defines an entry in the tSapIngPolicerTable. Entries are created/deleted in this table by SNMP sets to tSapIngPolicerRowStatus.
tSapIngPolicerTable	1.3.6.1.4.1.6527.3.1.2.16.3.12		not-accessible	tSapIngPolicerTable defines SAP Ingress Policer Table for providing, via SNMP, the capability of defining the policers. tSapIngPolicerTable holds a list of all the policers configured in the managed system. Policers must exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSapIngressFCTable.
tSapIngPolicyNameEntry	1.3.6.1.4.1.6527.3.1.2.16.3.13.1		not-accessible	Basic information about a specific SAP ingress policy name.
tSapIngPolicyNameTable	1.3.6.1.4.1.6527.3.1.2.16.3.13		not-accessible	A table that contains SAP ingress policy name information. Entries are created automatically by the system when tSapIngressPolicyName object is set for the SAP ingress policy.
tSapIngressDot1pEntry	1.3.6.1.4.1.6527.3.1.2.16.3.4.1		not-accessible	Information about a particular dot1p match for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapIngressDot1pTable	1.3.6.1.4.1.6527.3.1.2.16.3.4		not-accessible	a list of all dot1p entries for all sap-ingress policies.
tSapIngressDSCPEntry	1.3.6.1.4.1.6527.3.1.2.16.3.3.1		not-accessible	Information about a particular DSCP entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile. in the event that one policy has multiple entries, and the tSapIngressDSCP values are the same, only one queue will be created (the queue for the lexicographically first tSapIngressDSCP).
tSapIngressDSCPTable	1.3.6.1.4.1.6527.3.1.2.16.3.3		not-accessible	a list of all DSCP entries for all sap-ingress policies.
tSapIngressEntry	1.3.6.1.4.1.6527.3.1.2.16.3.1.1		not-accessible	Information about a particular Sap Ingress Policy. sap-ingress policy (1) is the default entry. Default Entry is created by the agent, other entries are created by user. Default Entry cannot be modified/deleted. The other entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapIngressFCEntry	1.3.6.1.4.1.6527.3.1.2.16.3.7.1		not-accessible	Information about a particular sap-ingress policy's forwarding class mappings to queues. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
tSapIngressFCTable	1.3.6.1.4.1.6527.3.1.2.16.3.7		not-accessible	This table maintains the mapping of a particular forwarding class traffic into the specified queue.
tSapIngressHsmdaQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.10.1		not-accessible	Information about a particular HSMDA queue for a sap-ingress policy. Entries are created by user.
tSapIngressHsmdaQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.10		not-accessible	Information about all sap-ingress policies' HSMDA queues. This table is obsoleted in 10.0 release.
tSapIngressIPCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.5.1		not-accessible	Information about a particular ip-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapIngressIPCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.5		not-accessible	information about all sap-ingress policies' ip-criteria entries.
tSapIngressIPv6CriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.9.1		not-accessible	Information about a particular ipv6-criteria entry for a sap-ingress policy. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapIngressIPv6CriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.9		not-accessible	Information about all sap-ingress policies' ipv6-criteria entries.
tSapIngressLspExpEntry	1.3.6.1.4.1.6527.3.1.2.16.3.11.1		not-accessible	Information about a particular sap-ingress policy's Lsp Exp Bit values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
tSapIngressLspExpTable	1.3.6.1.4.1.6527.3.1.2.16.3.11		not-accessible	This table maintains the mappings of an Lsp Exp Bit value into a forwarding class
tSapIngressMacCriteriaEntry	1.3.6.1.4.1.6527.3.1.2.16.3.6.1		not-accessible	Information about a particular mac-criteria entry for a sap-ingress policy. Entries are created by user. Entries are deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tSapIngressMacCriteriaTable	1.3.6.1.4.1.6527.3.1.2.16.3.6		not-accessible	information about all sap-ingress policies' mac-criteria entries.
tSapIngressObjects	1.3.6.1.4.1.6527.3.1.2.16.3
tSapIngressPrecEntry	1.3.6.1.4.1.6527.3.1.2.16.3.8.1		not-accessible	Information about a particular sap-ingress policy's IP precedence values to forwarding class mappings. Entries are created and deleted by user. They have a presumed StorageType of nonVolatile.
tSapIngressPrecTable	1.3.6.1.4.1.6527.3.1.2.16.3.8		not-accessible	This table maintains the mapping of a particular precedence value into a forwarding class
tSapIngressQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.3.2.1		not-accessible	Information about a particular queue for a sap-ingress policy. Queue (1) is the used as a default for unicast and queue (11) is used as a default for multicast. Both these are created by the agent and can be edited but not removed from the system. Other entries are created by user.
tSapIngressQueueTable	1.3.6.1.4.1.6527.3.1.2.16.3.2		not-accessible	information about all sap-ingress policies' queues.
tSapIngressTable	1.3.6.1.4.1.6527.3.1.2.16.3.1		not-accessible
tSchedulerObjects	1.3.6.1.4.1.6527.3.1.2.16.12
tSchedulerPolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.12.1.1		not-accessible	Information about a particular Scheduler Policy.
tSchedulerPolicyTable	1.3.6.1.4.1.6527.3.1.2.16.12.1		not-accessible
tSharedQueueEntry	1.3.6.1.4.1.6527.3.1.2.16.7.2.1		not-accessible	Defines an entry in the tSharedQueueTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueRowStatus. An exception to this rule is the default queue. The default queue is created/deleted as a result of the creation/deletion of a new queue policy in the tSharedQueuePolicyTable.
tSharedQueueFCEntry	1.3.6.1.4.1.6527.3.1.2.16.7.3.1		not-accessible	Defines an entry in the tSharedQueueFCTable. Entries are created/deleted in this table by SNMP sets to tSharedQueueFCRowStatus.
tSharedQueueFCTable	1.3.6.1.4.1.6527.3.1.2.16.7.3		not-accessible	Defines the Alcatel-Lucent SROS series forwarding class to shared queue mapping table for providing, via SNMP, the capability of defining the forwarding class to shared queue mapping for the queue policies existing in the tSharedQueuePolicyTable. tSharedQueueFCTable holds a list of forwarding class to queue mappings managed system defined for the queue policies. The forwarding classes which are not existing in this table should use the default shared queue for this policy.
tSharedQueueObjects	1.3.6.1.4.1.6527.3.1.2.16.7
tSharedQueuePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.7.1.1		not-accessible	Defines an entry in the tSharedQueuePolicyTable. Entries are created and deleted in this table by SNMP sets to tSharedQueuePolicyRowStatus.
tSharedQueuePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.7.1		not-accessible	Defines the Alcatel-Lucent SROS series Shared Queue Policy Table for providing, via SNMP, the capability of defining the queue policies. tSharedQueuePolicyTable holds a list of all shared queue policies in the managed system. Shared queue policies should exist in this table before being referenced elsewhere. There is a default queue policy 'default' created by the agent and can not be deleted.
tSharedQueueTable	1.3.6.1.4.1.6527.3.1.2.16.7.2		not-accessible	Defines the Alcatel-Lucent SROS series Shared Queue Table for providing, via SNMP, the capability of defining the queues for the shared queue policies existing in the tSharedQueuePolicyTable. tSharedQueueTable holds a list of all the shared queues in the managed system defined for the queue policies. Queues should exist in this table before being referenced by the forwarding class mappings within the queue policy as defined in the tSharedQueueFCTable. There is a default queue with the queue identifier '1' which gets created automatically when a new queue policy is created.
tSlopeObjects	1.3.6.1.4.1.6527.3.1.2.16.10
tSlopePolicyEntry	1.3.6.1.4.1.6527.3.1.2.16.10.1.1		not-accessible	Slope Policy Entry.
tSlopePolicyTable	1.3.6.1.4.1.6527.3.1.2.16.10.1		not-accessible	Slope Policy Table. Each entry in this table defines the RED slopes for the high and the low priority traffic.
tVirtualSchedulerEntry	1.3.6.1.4.1.6527.3.1.2.16.12.2.1		not-accessible	Information about a particular Scheduler belonging to a Scheduler Policy.
tVirtualSchedulerTable	1.3.6.1.4.1.6527.3.1.2.16.12.2		not-accessible
tWrrObjects	1.3.6.1.4.1.6527.3.1.2.16.28

RFC description

Alcatel-Lucent Service Router QoS management MIB for traffic engineering, queue management, and packet scheduling.

Start monitoring Nokia/Alcatel-Lucent 7750 SR, 7450 ESS SR OS platforms, entire product line (QoS DSCP/forwarding-class config status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-QOS-MIB

This MIB depends on

Related MIBs

What Is TIMETRA-QOS-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description