TIMETRA-FILTER-MIB

All MIBs › TIMETRA-FILTER-MIB

Organization: Alcatel-Lucent

Last Updated: 2011-02-01

Category: Nokia SR OS / Alcatel-Lucent 7750 SR, Security and Filtering

Description:

Manages Nokia/Alcatel-Lucent 7750 SR IP and MAC filter policy configuration and match criteria.

Imported Objects

InetAddress
InetAddressIPv6
InetAddressPrefixLength
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Opaque
TimeTicks
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowPointer
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

From TIMETRA-GLOBAL-MIB

timetraSRMIBModules	OBJECT-IDENTITY
tmnxSRConfs	OBJECT-IDENTITY
tmnxSRNotifyPrefix	OBJECT-IDENTITY
tmnxSRObjs	OBJECT-IDENTITY

From TIMETRA-TC-MIB

Dot1PPriority
IpAddressPrefixLength
QTagFullRange
QTagFullRangeOrNone
SdpBindId
ServiceAccessPoint
SvcISID
TDSCPFilterActionValue
TDSCPNameOrEmpty
TFrameType
TIpOption
TIpProtocol
TItemDescription
TLNamedItemOrEmpty
TMacFilterType
TNamedItem
TNamedItemOrEmpty
TTcpUdpPort
TTcpUdpPortOperator
TmnxAdminState
TmnxEncapVal
TmnxOperState
TmnxPortID
TmnxServId
TmnxVRtrIDOrZero

What Is TIMETRA-FILTER-MIB?

TIMETRA-FILTER-MIB is a Nokia (formerly Alcatel-Lucent) proprietary MIB for the 7750 SR and related SR OS-based routers, used to configure and manage IP and MAC packet-filter (ACL) policies applied to interfaces and services. It exposes configuration data for filter policies and their entries — filter IDs, scope, default action, description, and insertion points for features like RADIUS-based or credit-control filter-entry insertion — rather than raw traffic counters. Its role in monitoring is chiefly around configuration-state and capacity tracking: an operator can check tIPFilterRowStatus to confirm a filter policy is active, and watch high-water-mark objects like tIPFilterSubInsertHighWmark to see how close dynamically-inserted subscriber filter entries are to exhausting the policy's entry capacity, which is a useful proxy for software/control-plane health under load. Objects under the TIMETRA-FILTER-MIB OID branch let an NMS enumerate every configured filter policy on a 7750 SR and track its capacity state without needing separate vendor tooling. It is part of the broader TIMETRA-* MIB family for SR OS and depends on that platform's service and interface MIBs (e.g., TIMETRA-VRTR-MIB) for the contexts to which filters are applied. It is deployed in service-provider networks running Alcatel-Lucent/Nokia 7750 SR routers for edge and core traffic-filtering policy enforcement.

IPNetwork Monitor allows you to monitor SNMP objects defined in TIMETRA-FILTER-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

What Can Be Monitored

filter policy active/row status
default filter action (permit/deny)
filter entry insertion points (RADIUS, credit-control)
subscriber filter-entry high-water-mark/capacity

Supported Devices

Nokia/Alcatel-Lucent 7750 SR and related SR OS-based routers, entire product line (IP/MAC ACL filter policy status)

Monitoring Examples

An operator managing a 7750 SR would poll tIPFilterTable/tIPFilterEntry to enumerate configured IP filters, checking tIPFilterRowStatus and tIPFilterDefaultAction to confirm each policy is active and behaving as expected (permit vs. deny by default). Watching tIPFilterSubInsertHighWmark alongside tIPFilterCreditCntrlInsertPt/tIPFilterRadiusInsertPt reveals whether dynamically-inserted subscriber-aware filter entries (inserted via RADIUS or credit-control triggers) are approaching the filter's maximum entry capacity, which would signal a risk of new subscriber sessions failing to get their filter entries applied. This is primarily a policy-configuration and capacity-monitoring scenario rather than a hardware-health one.

OIDs

OID symbolic	OID numeric	Type	Access	Description
tAutoIPFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.17.1		not-accessible	Defines an entry in the tAutoIPFilterEntryTable. Entries are created and deleted in this table by the system. Each entry provides information about a single active automatic filter entry. This entry is obsoleted in release 3.0.
IP tAutoIPFilterEntrySourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.17.1.2	IpAddress	not-accessible	tAutoIPFilterEntrySourceIpAddr specifies the source ip-address and also serves as the secondary index to this table. This object is obsoleted in release 3.0.
ADR tAutoIPFilterEntrySourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.17.1.3	IpAddressPrefixLength	read-only	The value of tAutoIPFilterEntrySourceIpMask indicates the number of bits to be matched in the source ip-address. This object is obsoleted in release 3.0.
tAutoIPFilterEntryTable	1.3.6.1.4.1.6527.3.1.2.21.17		not-accessible	Defines the Alcatel-Lucent SROS series automatic IP filters for providing, via SNMP, the capability of gathering information regarding the same. tAutoIPFilterEntryTable holds a list of all automatic filter entries being used for filtering. This table is obsoleted in release 3.0.
TFI tAutoIPFilterId	1.3.6.1.4.1.6527.3.1.2.21.17.1.1	TFilterID	not-accessible	tAutoIPFilterId serves as a primary index and uniquely identifies an application point such as a routed interface or a SAP. This object is obsoleted in release 3.0.
TIT tDhcpFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.22.1.4	TItemDescription	read-create	User-provided description for this filter.
tDhcpFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.22.1		not-accessible	Information about a particular DHCP filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TDH tDhcpFilterId	1.3.6.1.4.1.6527.3.1.2.21.22.1.1	TDHCPFilterID	not-accessible	Uniquely identifies a mac filter as configures on this system.
TIM tDhcpFilterLastChanged	1.3.6.1.4.1.6527.3.1.2.21.22.1.3	TimeStamp	read-only	The value of tDhcpFilterLastChanged indicates the timestamp of last change to this row in tDhcpFilterTable.
TDH tDhcpFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.24.1.6	TDhcpFilterAction	read-create	The action to take for DHCP host creation requests that match this filter entry. The value none(1) specifies normal host creation behaviour, the value bypass-host-creation(2) specifies to bypass host creation, the value drop(3) specifies to drop the DHCP message.
tDhcpFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.24.1		not-accessible	Information about a particular DHCP filter entry. Every DHCP filter can have zero or more DHCP filter match entries. A filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tDhcpFilterParamsId	1.3.6.1.4.1.6527.3.1.2.21.24.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every DHCP filter can have multiple entries, therefore every DHCP filter entry is identified by the tDhcpFilterId and tDhcpFilterParamsId.
TIM tDhcpFilterParamsLastChanged	1.3.6.1.4.1.6527.3.1.2.21.24.1.3	TimeStamp	read-only	The value of tDhcpFilterParamsLastChanged indicates the timestamp of last change to this row in tDhcpFilterParamsTable.
TDH tDhcpFilterParamsOptionMatch	1.3.6.1.4.1.6527.3.1.2.21.24.1.5	TDhcpFilterMatch	read-create	The value of tDhcpFilterParamsOptionMatch specifies the criteria that the DHCP option must match to trigger this filter entry. The value present(1) specifies that the DHCP option must be present, the value absent(2) specifies that the DHCP option must be absent. In these cases tDhcpFilterParamsOptionValue will be reset to an empty string. A value string(3), string-exact(4), string-invert(5), string-exact-invert(6), hex(7), hex-exact(8), hex-invert(9) or hex-exact-invert(10) requires an octet string to be present in tDhcpFilterParamsOptionValue to match against.
INT tDhcpFilterParamsOptionNumber	1.3.6.1.4.1.6527.3.1.2.21.24.1.4	INTEGER	read-create	The value of tDhcpFilterParamsOptionNumber specifies the number of the DHCP option to filter on.
OCT tDhcpFilterParamsOptionValue	1.3.6.1.4.1.6527.3.1.2.21.24.1.7	OCTET STRING	read-create	The value of the object tDhcpFilterParamsOptionValue specifies the matching pattern for the filtered DHCP option. This object is mandatory at creation time. A zero length value is only allowed when the value of tDhcpFilterParamsOptionMatch is present(1) or absent(2).
ROW tDhcpFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.24.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tDhcpFilterParamsTable.
tDhcpFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.24		not-accessible	A table of all DHCP filter match entries for all DHCP filters.
TIM tDhcpFilterParamsTblLastChanged	1.3.6.1.4.1.6527.3.1.2.21.23	TimeStamp	read-only	The value of tDhcpFilterParamsTblLastChanged indicates the sysUpTime at the time of the last modification to tDhcpFilterParamsTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tDhcpFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.22.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tDhcpFilterTable.
tDhcpFilterTable	1.3.6.1.4.1.6527.3.1.2.21.22		not-accessible	Contains a list of all DHCP filters configured on this system.
TIM tDhcpFilterTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.21	TimeStamp	read-only	The value of tDhcpFilterTableLastChanged indicates the sysUpTime at the time of the last modification to tDhcpFilterTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tDhcpFilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.37			The group of objects supporting DHCP Filters on Alcatel 7x50 ESS/SR series systems 10.0 release.
tDhcpFilterV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.34			The group of objects supporting DHCP Filters on Alcatel 7x50 ESS/SR series systems 9.0 release.
tFilter7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.4			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R4.0.
tFilter7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.6			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0.
tFilter7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.8			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0.
tFilter7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.10			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R8.0.
tFilter7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.5			The compliance statement for management of Filter features on Alcatel 7750 SR series systems release R4.0.
tFilter77x0V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.7			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0.
tFilter77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.9			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0.
tFilter77x0V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.11			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R8.0.
tFilter7xxxV10v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.13			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R10.0.
tFilter7xxxV9v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.12			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R9.0.
STR tFilterAlarmDescription	1.3.6.1.4.1.6527.3.1.2.21.8.3	DisplayString	accessible-for-notify	The value of the object tFilterAlarmDescription is a printable character string which contains information about the cause of the problem.
NTF tFilterBgpFlowSpecProblem	1.3.6.1.4.1.6527.3.1.3.21.0.7			The tFilterBgpFlowSpecProblem notification is generated when a BGP flowspec NLRI is received in the filter module that cannot be treated - i.e. for which no filter entry is installed in the system, or when there is a problem inserting (new) or reshuffling (existing) flowspec or merged filter entries.
TIM tFilterDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.21.9.1	TimeStamp	read-only	timestamp of last change to tFilterObjects.
NTF tFilterEntryActivationFailed	1.3.6.1.4.1.6527.3.1.3.21.0.2			The tFilterEntryActivationFailed event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event is generated when this installation failed because of resource problems.
NTF tFilterEntryActivationRestored	1.3.6.1.4.1.6527.3.1.3.21.0.3			The tFilterEntryActivationRestored event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event tFilterEntryActivationFailed is generated when this installation originally failed because of resources problems, The notification tFilterEntryActivationRestored is sent when either the time range associated with the filter is no longer active, or when the filter entry was installed due to the availability of new resources.
tFilterGroupInsertedEntries	1.3.6.1.4.1.6527.3.1.2.21.20
TFI tFilterId	1.3.6.1.4.1.6527.3.1.2.21.8.4	TFilterID	accessible-for-notify	The value of the object tFilterId, together with the object tFilterType uniquely defines the filter for which this notification is generated.
tFilterLiObjects	1.3.6.1.4.1.6527.3.1.2.21.31
G32 tFilterLogBindings	1.3.6.1.4.1.6527.3.1.2.21.6.3	Gauge32	read-only	tFilterLogBindings maintains the count of the configured filter log bindings presently existing on the system. The bindings get instantiated when the filter is instantiated
TIT tFilterLogDescription	1.3.6.1.4.1.6527.3.1.2.21.5.1.4	TItemDescription	read-create	User-provided description for this filter log entry.
TFI tFilterLogDestination	1.3.6.1.4.1.6527.3.1.2.21.5.1.3	TFilterLogDestination	read-create	This object specifies the destination of the log.
T/F tFilterLogEnabled	1.3.6.1.4.1.6527.3.1.2.21.5.1.9	TruthValue	read-create
tFilterLogEntry	1.3.6.1.4.1.6527.3.1.2.21.5.1		not-accessible	Information about a particular Filter Log entry.
U32 tFilterLogFileId	1.3.6.1.4.1.6527.3.1.2.21.5.1.7	Unsigned32	read-create	The object tFilterLogFileId specifies the File Id to be used as destination. If tFilterLogDestination is not 'file(3)' then the object tFilterLogFileId Imaintains a value of '0', and any change attempts will be silently discarded.
tFilterLogGroup	1.3.6.1.4.1.6527.3.1.1.21.2.3			The group of objects supporting management of filter log objects on Alcatel-Lucent SROS series systems.
TFI tFilterLogId	1.3.6.1.4.1.6527.3.1.2.21.5.1.1	TFilterLogId	not-accessible	This is the index for the entry. An entry cannot be created with an id of 0.
G32 tFilterLogInstances	1.3.6.1.4.1.6527.3.1.2.21.6.2	Gauge32	read-only	tFilterLogInstances maintains the instances of filter logs presently existing on the system
G32 tFilterLogMaxInstances	1.3.6.1.4.1.6527.3.1.2.21.6.1	Gauge32	read-only	tFilterLogMaxInstances maintains the maximum allowed instances of filter logs allowed on the system
U32 tFilterLogMaxNumEntries	1.3.6.1.4.1.6527.3.1.2.21.5.1.5	Unsigned32	read-create	The object tFilterLogMaxNumEntries specifies the maximum number of entries that the log can store. If tFilterLogDestination is not 'memory(1)' then the object tFilterLogMaxNumEntries maintains a value of '0', and Any change attempts will be silently discarded.
ROW tFilterLogRowStatus	1.3.6.1.4.1.6527.3.1.2.21.5.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tFilterLogTable.
tFilterLogScalars	1.3.6.1.4.1.6527.3.1.2.21.6
T/F tFilterLogStopOnFull	1.3.6.1.4.1.6527.3.1.2.21.5.1.8	TruthValue	read-create
TFI tFilterLogSummaryCrit1	1.3.6.1.4.1.6527.3.1.2.21.5.1.11	TFilterLogSummaryCriterium	read-create	The value of tFilterLogSummaryCrit1 specifies how filter log entries will be summarized. This field is only meaningful if the object tFilterLogSummaryEnabled is set to true.
T/F tFilterLogSummaryEnabled	1.3.6.1.4.1.6527.3.1.2.21.5.1.10	TruthValue	read-create	The value of tFilterLogSummaryEnabled specifies whether or not summarization of filter log entries is performed. Summarization is only allowed in case tFilterLogDestination is set to syslog.
U32 tFilterLogSysLogId	1.3.6.1.4.1.6527.3.1.2.21.5.1.6	Unsigned32	read-create	The object tFilterLogSysLogId specifies the syslog Id to be used as destination. If tFilterLogDestination is not 'sysLog(2)' then the object tFilterLogSysLogId maintains a value of '0', and any change attempts will be silently discarded.
tFilterLogTable	1.3.6.1.4.1.6527.3.1.2.21.5		not-accessible	A table of all filter logs.
tFilterLogV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.18			The group of objects supporting Filter Log Summarization on Alcatel 7x50 ESS/SR series systems 5.0 release.
tFilterMIBCompliances	1.3.6.1.4.1.6527.3.1.1.21.1
tFilterMIBConformance	1.3.6.1.4.1.6527.3.1.1.21
tFilterMIBGroups	1.3.6.1.4.1.6527.3.1.1.21.2
tFilterNameV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.36			The group of objects supporting management of filter-name objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjects	1.3.6.1.4.1.6527.3.1.2.21.8
tFilterNotificationObjGroup	1.3.6.1.4.1.6527.3.1.1.21.2.8			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.21			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.27			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.33			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotifications	1.3.6.1.4.1.6527.3.1.3.21.0
tFilterNotificationsGroup	1.3.6.1.4.1.6527.3.1.1.21.2.9			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterNotificationsPrefix	1.3.6.1.4.1.6527.3.1.3.21
tFilterNotificationsV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.28			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterNotificationsV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.32			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterObjects	1.3.6.1.4.1.6527.3.1.2.21
NUM tFilterParmRow	1.3.6.1.4.1.6527.3.1.2.21.8.2	RowPointer	accessible-for-notify	The value of the object tFilterParmRow indicates the OID of the row status of the applicable filter parameter table. This can be a row from either one of the following tables: - tIPFilterParamsTable; - tMacFilterParamsTable; or - tIPv6FilterParamsTable
INT tFilterPBRDropReason	1.3.6.1.4.1.6527.3.1.2.21.8.1	INTEGER	accessible-for-notify	Used by tIPFilterPBRPacketsDrop to report the failure reason code.
TIT tFilterPrefixListDescription	1.3.6.1.4.1.6527.3.1.2.21.33.1.5	TItemDescription	read-create	The object tFilterPrefixListDescription specifies a description for this row.
tFilterPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.21.33.1		not-accessible	An entry in the tFilterPrefixListTable.
tFilterPrefixListEntryEntry	1.3.6.1.4.1.6527.3.1.2.21.35.1		not-accessible	An entry in the tFilterPrefixListEntryTable.
IP tFilterPrefixListEntryPrefix	1.3.6.1.4.1.6527.3.1.2.21.35.1.2	InetAddress	not-accessible	The value of tFilterPrefixListEntryPrefix specifies the IP prefix of this prefix list entry.
ADR tFilterPrefixListEntryPrefixLen	1.3.6.1.4.1.6527.3.1.2.21.35.1.3	InetAddressPrefixLength	not-accessible	The value of tFilterPrefixListEntryPrefixLen specifiesd the IP prefix length of this prefix list entry.
IPt tFilterPrefixListEntryPrefixType	1.3.6.1.4.1.6527.3.1.2.21.35.1.1	InetAddressType	not-accessible	The object tFilterPrefixListEntryPrefixType specifies whether the prefix specified in tFilterPrefixListEntryPrefix is an IPv4 or IPv6 prefix. The value of tFilterPrefixListEntryPrefixType must match the value of the object tFilterPrefixListType.
ROW tFilterPrefixListEntryRowStatus	1.3.6.1.4.1.6527.3.1.2.21.35.1.4	RowStatus	read-create	The object tFilterPrefixListEntryRowStatus specifies the status of this row.
tFilterPrefixListEntryTable	1.3.6.1.4.1.6527.3.1.2.21.35		not-accessible	The table tFilterPrefixListEntryTable contains an entry for each prefix defined in any prefix list defined in the filter area.
TIM tFilterPrefixListEntryTblLstChg	1.3.6.1.4.1.6527.3.1.2.21.34	TimeStamp	read-only	The object tFilterPrefixListEntryTblLstChg indicates the sysUpTime at the time of the last modification of tFilterPrefixListEntryTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains the value zero.
TIM tFilterPrefixListLastChanged	1.3.6.1.4.1.6527.3.1.2.21.33.1.4	TimeStamp	read-only	The object tFilterPrefixListLastChanged indicates the sysUpTime at the time of the last modification of this row. If no changes were made to the row since the last re-initialization of the local network management subsystem, then this object contains the value zero.
TNA tFilterPrefixListName	1.3.6.1.4.1.6527.3.1.2.21.33.1.2	TNamedItem	not-accessible	The object tFilterPrefixListName specifies the name given to this prefix list.
ROW tFilterPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.21.33.1.3	RowStatus	read-create	The object tFilterPrefixListRowStatus specifies the status of this row.
tFilterPrefixListTable	1.3.6.1.4.1.6527.3.1.2.21.33		not-accessible	The table tFilterPrefixListTable contains an entry for each prefix list defined in the filter area.
TIM tFilterPrefixListTableLstChng	1.3.6.1.4.1.6527.3.1.2.21.32	TimeStamp	read-only	The object tFilterPrefixListTableLstChng indicates the sysUpTime at the time of the last modification of tFilterPrefixListTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains the value zero.
TFL tFilterPrefixListType	1.3.6.1.4.1.6527.3.1.2.21.33.1.1	TFltrPrefixListType	not-accessible	The object TFltrPrefixListType specifies the type of prefix list for the prefix list tFilterPrefixListName.
tFilterPrefixListV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.39			The group of objects supporting management of IP prefix lists in IP filters on Alcatel-Lucent SROS series systems 10.0 release.
U32 tFilterRDAdminPriority	1.3.6.1.4.1.6527.3.1.2.21.11.1.4	Unsigned32	read-create	tFilterRDAdminPriority holds the configured base priority for the destination.
TMN tFilterRDAdminState	1.3.6.1.4.1.6527.3.1.2.21.11.1.6	TmnxAdminState	read-create	tFilterRDAdminState maintains the configured state of the destination. If the admin state is 'outOfService', the tests for this destination will not be conducted.
TIT tFilterRDDescription	1.3.6.1.4.1.6527.3.1.2.21.11.1.3	TItemDescription	read-create	User-provided description for this destination is maintained in the object tFilterRDDescription.
U32 tFilterRDOperPriority	1.3.6.1.4.1.6527.3.1.2.21.11.1.5	Unsigned32	read-only	tFilterRDAdminPriority maintains the operational value of the priority for this destination. The highest operational priority across multiple destinations is used as the preferred destination. A value of '0' is maintained if the destination if tFilterRDOperState is 'outOfService'.
TMN tFilterRDOperState	1.3.6.1.4.1.6527.3.1.2.21.11.1.7	TmnxOperState	read-only	The value of tFilterRDOperState indicates the operational state of the destination.
ROW tFilterRDRowStatus	1.3.6.1.4.1.6527.3.1.2.21.11.1.2	RowStatus	read-create	tFilterRDRowStatus allows entries to be created and deleted in the tFilterRedirectDestTable.
IP tFilterRedirectDest	1.3.6.1.4.1.6527.3.1.2.21.11.1.1	IpAddress	not-accessible	tFilterRedirectDest holds the IP address of the destination entry.
tFilterRedirectDestEntry	1.3.6.1.4.1.6527.3.1.2.21.11.1		not-accessible	Information about a particular Redirect destination. Entries are created/deleted by user.
tFilterRedirectDestTable	1.3.6.1.4.1.6527.3.1.2.21.11		not-accessible	Contains a List of all redirect destinations configured on this system.
tFilterRedirectPingTestEntry	1.3.6.1.4.1.6527.3.1.2.21.16.1		not-accessible	Information about a specific Ping test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tFilterRedirectPingTestTable	1.3.6.1.4.1.6527.3.1.2.21.16		not-accessible	Contains a List of all redirect Ping tests configured on this system.
TNA tFilterRedirectPolicy	1.3.6.1.4.1.6527.3.1.2.21.10.1.1	TNamedItem	not-accessible	tFilterRedirectPolicy uniquely identifies each redirect policy configured on this system.
tFilterRedirectPolicyEntry	1.3.6.1.4.1.6527.3.1.2.21.10.1		not-accessible	Information about a particular redirect policy. Entries are created/deleted by user.
tFilterRedirectPolicyGroup	1.3.6.1.4.1.6527.3.1.1.21.2.4			The group of objects supporting management of filter redirect policy objects on Alcatel-Lucent SROS series systems.
tFilterRedirectPolicyTable	1.3.6.1.4.1.6527.3.1.2.21.10		not-accessible	Contains a List of all redirect policies configured on this system.
tFilterRedirectSNMPRespEntry	1.3.6.1.4.1.6527.3.1.2.21.13.1		not-accessible	Information about action to be taken for a specific destination when a specific response is received. Each row is created once and cannot be modified after creation. Any change attempts will be silently discarded.
tFilterRedirectSNMPRespTable	1.3.6.1.4.1.6527.3.1.2.21.13		not-accessible	Each row in this table holds the effect of the test on the destination for a specific return value. Each row is created once and cannot be modified after creation. Any change attempts will be silently discarded.
TNA tFilterRedirectSNMPTest	1.3.6.1.4.1.6527.3.1.2.21.12.1.1	TNamedItem	not-accessible	tFilterRedirectSNMPTest specifies the name of the SNMP test.
tFilterRedirectSNMPTestEntry	1.3.6.1.4.1.6527.3.1.2.21.12.1		not-accessible	Information about a specific SNMP test configured for a destination. Entries are created/deleted by user.
tFilterRedirectSNMPTestTable	1.3.6.1.4.1.6527.3.1.2.21.12		not-accessible	Contains a List of all redirect SNMP tests configured on this system.
U32 tFilterRedirectURLHighRespCode	1.3.6.1.4.1.6527.3.1.2.21.15.1.2	Unsigned32	not-accessible	tFilterRedirectURLHighRespCode specifies the higher return code of the range specified by this entry.
U32 tFilterRedirectURLLowRespCode	1.3.6.1.4.1.6527.3.1.2.21.15.1.1	Unsigned32	not-accessible	tFilterRedirectURLLowRespCode specifies the lower return code of the range specified by this entry.
tFilterRedirectURLRespEntry	1.3.6.1.4.1.6527.3.1.2.21.15.1		not-accessible	Information about action to be taken for a specific destination when a return value within the range specified between tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode is received.
tFilterRedirectURLRespTable	1.3.6.1.4.1.6527.3.1.2.21.15		not-accessible	Each row in this table holds the effect of the test on the destination for a range of return values.
TNA tFilterRedirectURLTest	1.3.6.1.4.1.6527.3.1.2.21.14.1.1	TNamedItem	not-accessible	tFilterRedirectURLTest holds the name of the URL test.
tFilterRedirectURLTestEntry	1.3.6.1.4.1.6527.3.1.2.21.14.1		not-accessible	Information about a specific URL test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tFilterRedirectURLTestTable	1.3.6.1.4.1.6527.3.1.2.21.14		not-accessible	Contains a List of all redirect snmp tests configured on this system.
IP tFilterRPActiveDest	1.3.6.1.4.1.6527.3.1.2.21.10.1.5	IpAddress	read-only	tFilterRPActiveDest indicates the IP address of the active destination. A value of 0 indicates that there is currently no active destination.
TMN tFilterRPAdminState	1.3.6.1.4.1.6527.3.1.2.21.10.1.4	TmnxAdminState	read-create	tFilterRPAdminState holds the admin state of the policy. If the admin state is 'outOfService', the tests will not be conducted.
TIT tFilterRPDescription	1.3.6.1.4.1.6527.3.1.2.21.10.1.3	TItemDescription	read-create	User-provided description for this redirect policy is maintained in the object tFilterRPDescription.
ROW tFilterRPRowStatus	1.3.6.1.4.1.6527.3.1.2.21.10.1.2	RowStatus	read-create	tFilterRPRowStatus allows entries to be created and deleted in the tFilterRedirectPolicyTable.
U32 tFilterRPTDropCount	1.3.6.1.4.1.6527.3.1.2.21.16.1.4	Unsigned32	read-create	The value of tFilterRPTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRPTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.16.1.5	Unsigned32	read-create	The value of tFilterRPTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRPTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.16.1.6	Unsigned32	read-only	The value of tFilterRPTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
U32 tFilterRPTInterval	1.3.6.1.4.1.6527.3.1.2.21.16.1.2	Unsigned32	read-create	The value of tFilterRPTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
INT tFilterRPTLastAction	1.3.6.1.4.1.6527.3.1.2.21.16.1.8	INTEGER	read-only	tFilterRPTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRPTHoldDown seconds.
TIM tFilterRPTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.16.1.7	TimeStamp	read-only	tFilterRPTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
ROW tFilterRPTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.16.1.1	RowStatus	read-create	This object allows tests to be created and deleted in the tFilterRedirectPingTestTable.
U32 tFilterRPTTimeout	1.3.6.1.4.1.6527.3.1.2.21.16.1.3	Unsigned32	read-create	The value of tFilterRPTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
STR tFilterRSTCommunity	1.3.6.1.4.1.6527.3.1.2.21.12.1.4	DisplayString	read-create	The value of tFilterRSTCommunity is the SNMPv1 or SNMPv2c Community String or the SNMPv3 Context Name used to conduct this SNMP test as described in RFC2571 and RFC2737. When the value of tFilterRSTSNMPVersion is 'snmpv1' or 'snmpv2c' this object represents a community string. When the value of tFilterRSTSNMPVersion is 'snmpv3' this object represents a SNMPv3 context name. The value of this object can only be changed if the object tFilterRSTOID is changed at the same time.
C32 tFilterRSTCounter32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.7	Counter32	read-create	The value tFilterRSTRespType is 'counter32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
C64 tFilterRSTCounter64Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.14	Counter64	read-create	The response value if tFilterRSTRespType is set to 'counter64'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTDropCount	1.3.6.1.4.1.6527.3.1.2.21.12.1.8	Unsigned32	read-create	The value of tFilterRSTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRSTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.12.1.9	Unsigned32	read-create	The value of tFilterRSTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRSTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.12.1.10	Unsigned32	read-only	The value of tFilterRSTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
I32 tFilterRSTInt32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.10	Integer32	read-create	The value tFilterRSTRespType is 'integer32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTInterval	1.3.6.1.4.1.6527.3.1.2.21.12.1.6	Unsigned32	read-create	The value of tFilterRSTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
IP tFilterRSTIpAddressVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.12	IpAddress	read-create	The value tFilterRSTRespType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTOctetStringVal column. This field cannot be modified after creation. Any change attempts will be silently discarded.
INT tFilterRSTLastAction	1.3.6.1.4.1.6527.3.1.2.21.12.1.23	INTEGER	read-only	tFilterRSTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRSTHoldDown seconds.
TIM tFilterRSTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.12.1.11	TimeStamp	read-only	tFilterRSTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
C32 tFilterRSTLastCounter32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.14	Counter32	read-only	The value tFilterRSTLastType is 'counter32'.
C64 tFilterRSTLastCounter64Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.21	Counter64	read-only	The value tFilterRSTLastType is 'counter64'.
I32 tFilterRSTLastInt32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.17	Integer32	read-only	The value tFilterRSTLastType is 'integer32'.
IP tFilterRSTLastIpAddressVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.19	IpAddress	read-only	The value tFilterRSTLastType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTLastOctetStringVal column.
OCT tFilterRSTLastOctetStringVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.18	OCTET STRING	read-only	The value tFilterRSTLastType is 'octetString'.
OID tFilterRSTLastOID	1.3.6.1.4.1.6527.3.1.2.21.12.1.12	OBJECT IDENTIFIER	read-only	The object tFilterRSTLastOID holds the OID received in the response.
OID tFilterRSTLastOidVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.20	OBJECT IDENTIFIER	read-only	The value tFilterRSTLastType is 'objectId'.
OPA tFilterRSTLastOpaqueVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.22	Opaque	read-only	The value tFilterRSTLastType is 'opaque'.
I32 tFilterRSTLastPrioChange	1.3.6.1.4.1.6527.3.1.2.21.12.1.24	Integer32	read-only	If the last action on the operational state of the destination i.e. tFilterRSTLastAction is 'enable', tFilterRSTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'.
TIK tFilterRSTLastTimeTicksVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.16	TimeTicks	read-only	The value tFilterRSTLastType is 'timeTicks'.
INT tFilterRSTLastType	1.3.6.1.4.1.6527.3.1.2.21.12.1.13	INTEGER	read-only	tFilterRSTLastType maintains the type of the value received. A value of none(0) indicated that no value has been received
U32 tFilterRSTLastUnsigned32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.15	Unsigned32	read-only	The value tFilterRSTLastType is 'unsigned32'.
I32 tFilterRSTNextRespIndex	1.3.6.1.4.1.6527.3.1.2.21.12.1.25	Integer32	read-only	The value of tFilterRSTNextRespIndex indicates the next response index to be used while creating a row in the tFilterRedirectSNMPRespTable. The value of '-1' means that the maximum number of return values for this OID are already configured.
OCT tFilterRSTOctetStringVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.11	OCTET STRING	read-create	The value tFilterRSTRespType is 'octetString'. This field cannot be modified after creation. Any change attempts will be silently discarded.
OID tFilterRSTOID	1.3.6.1.4.1.6527.3.1.2.21.12.1.3	OBJECT IDENTIFIER	read-create	tFilterRSTOID stores the OID of the object to be fetched from the destination. The value of this object can only be changed if the object tFilterRSTCommunity is changed at the same time.
OID tFilterRSTOidVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.13	OBJECT IDENTIFIER	read-create	The response value if tFilterRSTRespType is set to 'objectId'. This field cannot be modified after creation. Any change attempts will be silently discarded.
OPA tFilterRSTOpaqueVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.15	Opaque	read-create	The value tFilterRSTRespType is 'opaque'. This field cannot be modified after creation. Any change attempts will be silently discarded.
INT tFilterRSTRespAction	1.3.6.1.4.1.6527.3.1.2.21.13.1.3	INTEGER	read-create	tFilterRSTRespAction specifies the type of change that should be made to the destination priority tFilterRDOperPriority, if the return value is same as tFilterRSTRespId. If tFilterRSTRespPrioChange is 0 this field will be set to 'disable'. This field cannot be modified after creation. Any change attempts will be silently discarded.
I32 tFilterRSTRespId	1.3.6.1.4.1.6527.3.1.2.21.13.1.1	Integer32	not-accessible	tFilterRSTRespId holds the response value received from the destination.
OID tFilterRSTRespOID	1.3.6.1.4.1.6527.3.1.2.21.13.1.5	OBJECT IDENTIFIER	read-create	The object tFilterRSTRespOID holds the OID to be received in the response. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTRespPrioChange	1.3.6.1.4.1.6527.3.1.2.21.13.1.4	Unsigned32	read-create	tFilterRSTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRSTRespAction is either 'increase' or 'decrease'. If tFilterRSTRespAction is 'disable', this field will be set to 0. This field cannot be modified after creation. Any change attempts will be silently discarded.
ROW tFilterRSTRespRowStatus	1.3.6.1.4.1.6527.3.1.2.21.13.1.2	RowStatus	read-create	This object allows response strings to be specified for a specific test and the change it will cause to the priority of the destination.
INT tFilterRSTRespType	1.3.6.1.4.1.6527.3.1.2.21.13.1.6	INTEGER	read-create	tFilterRSTRespType maintains the type of the value to be received. Note: types 'objectId' and 'counter64' are not supported for now, and will be rejected when used. This field cannot be modified after creation. Any change attempts will be silently discarded.
ROW tFilterRSTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.12.1.2	RowStatus	read-create	tFilterRSTRowStatus allows tests to be created and deleted in the tFilterRedirectSNMPTestTable.
INT tFilterRSTSNMPVersion	1.3.6.1.4.1.6527.3.1.2.21.12.1.5	INTEGER	read-create	tFilterRSTSNMPVersion specifies the SNMP PDU format to be used while conducting the test.
U32 tFilterRSTTimeout	1.3.6.1.4.1.6527.3.1.2.21.12.1.7	Unsigned32	read-create	The value of tFilterRSTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
TIK tFilterRSTTimeTicksVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.9	TimeTicks	read-create	The value tFilterRSTRespType is 'timeTicks'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTUnsigned32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.8	Unsigned32	read-create	The value tFilterRSTRespType is 'unsigned32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRUTDropCount	1.3.6.1.4.1.6527.3.1.2.21.14.1.7	Unsigned32	read-create	The value of tFilterRUTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRUTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.14.1.8	Unsigned32	read-create	The value of tFilterRUTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRUTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.14.1.9	Unsigned32	read-only	The value of tFilterRUTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
STR tFilterRUTHTTPVersion	1.3.6.1.4.1.6527.3.1.2.21.14.1.4	DisplayString	read-create	The HTTP Version to be used while performing the URL test. The system by default uses HTTP Version 1.1 until explicitly specified.
U32 tFilterRUTInterval	1.3.6.1.4.1.6527.3.1.2.21.14.1.5	Unsigned32	read-create	The value of tFilterRUTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
INT tFilterRUTLastAction	1.3.6.1.4.1.6527.3.1.2.21.14.1.12	INTEGER	read-only	tFilterRUTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRUTHoldDown seconds.
TIM tFilterRUTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.14.1.10	TimeStamp	read-only	tFilterRUTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
I32 tFilterRUTLastPrioChange	1.3.6.1.4.1.6527.3.1.2.21.14.1.13	Integer32	read-only	If the last action on the operational state of the destination i.e. tFilterRUTLastAction is 'enable', tFilterRUTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'.
U32 tFilterRUTLastRetCode	1.3.6.1.4.1.6527.3.1.2.21.14.1.11	Unsigned32	read-only	tFilterRUTLastRetCode holds the return code received in the last response.
INT tFilterRUTRespAction	1.3.6.1.4.1.6527.3.1.2.21.15.1.4	INTEGER	read-create	If the tFilterRUTRespAction is either 'increase(1)' or 'decrease(2)' tFilterRUTRespPrioChange specifies the offset to be applied to the destination base priority (tFilterRDAdminPriority) in order to compute the tFilterRDOperPriority as a result of this test. If the tFilterRUTRespAction is set to 'disable(3)', on the reception of the specified response, the destination will be deemed unusable and the tFilterRDOperPriority will be set to '0'. The value of tFilterRUTRespAction will be forced by the system to the value 'disable(3)' if the tFilterRUTRespPrioChange has the value '0'. Any change attempts will be silently discarded in this case.
U32 tFilterRUTRespPrioChange	1.3.6.1.4.1.6527.3.1.2.21.15.1.5	Unsigned32	read-create	tFilterRUTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRUTRespAction is either 'increase' or 'decrease'. If tFilterRUTRespAction is 'disable', tFilterRUTRespPrioChange will be forced to 0. Any change to tFilterRUTRespPrioChange will be silently discarded in this case. Setting the object tFilterRUTRespPrioChange to 0 will cause the value of tFilterRUTRespAction to be set to 'disable'.
ROW tFilterRUTRespRowStatus	1.3.6.1.4.1.6527.3.1.2.21.15.1.3	RowStatus	read-create	tFilterRUTRespRowStatus allows the mapping of a range of return codes returned from a specific test to the change it will cause to the priority of the destination.
ROW tFilterRUTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.14.1.2	RowStatus	read-create	tFilterRUTRowStatus allows tests to be created and deleted in the tFilterRedirectURLTestTable.
U32 tFilterRUTTimeout	1.3.6.1.4.1.6527.3.1.2.21.14.1.6	Unsigned32	read-create	The value of tFilterRUTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
STR tFilterRUTURL	1.3.6.1.4.1.6527.3.1.2.21.14.1.3	DisplayString	read-create	This object holds the URL to be probed.
tFilterScalarGroup	1.3.6.1.4.1.6527.3.1.1.21.2.7			The group of objects supporting management of filter scalar objects on Alcatel-Lucent SROS series systems.
NTF tFilterSubInsFltrEntryDropped	1.3.6.1.4.1.6527.3.1.3.21.0.6			The tFilterSubInsFltrEntryDropped notification is generated when a request to insert a filter entry was not successful.
NTF tFilterSubInsSpaceAlarmCleared	1.3.6.1.4.1.6527.3.1.3.21.0.5			The tFilterSubInsSpaceAlarmCleared notification is generated when the utilization of a filter entry range that was reserved for filter entry insertion dropped below to the configured low watermark for his filter.
NTF tFilterSubInsSpaceAlarmRaised	1.3.6.1.4.1.6527.3.1.3.21.0.4			The tFilterSubInsSpaceAlarmRaised notification is generated when the utilization of a filter entry range that was reserved for filter entry insertion increases to the configured high watermark for his filter
TFI tFilterSubInsSpaceOwner	1.3.6.1.4.1.6527.3.1.2.21.8.6	TFilterSubInsSpaceOwner	accessible-for-notify	The value of the object tFilterSubInsSpaceOwner, specifies for which application, capable of inserting filter entries, this notification is generated.
INT tFilterThresholdReached	1.3.6.1.4.1.6527.3.1.2.21.8.7	INTEGER	accessible-for-notify	The value of the object tFilterThresholdReached, specifies the threshold reached at the moment this notificastion was generated.
tFilterTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.21.9
TFI tFilterType	1.3.6.1.4.1.6527.3.1.2.21.8.5	TFilterType	accessible-for-notify	The value of the object tFilterType, together with the object tFilterId uniquely defines the filter for which this notification is generated.
OCT tFltrFLowSpecNLRI	1.3.6.1.4.1.6527.3.1.2.21.8.10	OCTET STRING	accessible-for-notify	The value of the object tFltrFLowSpecNLRI contains at most the first 30 octets of the NLRI causing the problem.
INT tFltrFlowSpecProblem	1.3.6.1.4.1.6527.3.1.2.21.8.8	INTEGER	accessible-for-notify	The value of the object tFltrFlowSpecProblem, indicates which problem has occured while processing a BGP flowspec NLRI in the filter module.
STR tFltrFlowSpecProblemDescription	1.3.6.1.4.1.6527.3.1.2.21.8.9	DisplayString	accessible-for-notify	The value of the object tFltrFlowSpecProblem may contain a more detailed problem description then as given by tFltrFlowSpecProblem.
U32 tFltrFlowSpecVrtrId	1.3.6.1.4.1.6527.3.1.2.21.8.11	Unsigned32	accessible-for-notify	The value of the object tFltrFlowSpecVrtrId indicates the virtual router Id to which the NLRI belongs.
TFI tFltrGrpInsrtdEntriesApplication	1.3.6.1.4.1.6527.3.1.2.21.20.3	TFilterSubInsSpaceOwner	read-write	tFltrGrpInsrtdEntriesApplication specifies for which application the the inserted entries must be grouped.
T/F tFltrGrpInsrtdEntriesExecute	1.3.6.1.4.1.6527.3.1.2.21.20.7	TruthValue	read-write	Setting the object tFltrGrpInsrtdEntriesExecute to 'true' will cause the system to attempt to execute te grouping command as specified by the other MIB objects in the tFilterGroupInsertedEntries mibgroup. When read the value will always indicate 'false'. The result of the command can be found in tFltrGrpInsrtdEntriesResult and tFltrGrpInsrtdEntriesFeedback
STR tFltrGrpInsrtdEntriesFeedback	1.3.6.1.4.1.6527.3.1.2.21.20.6	DisplayString	read-only	tFltrGrpInsrtdEntriesFeedback may indicate additional info on the last inserted filter entries grouping action performed.
TFI tFltrGrpInsrtdEntriesFilterId	1.3.6.1.4.1.6527.3.1.2.21.20.2	TFilterID	read-write	tFltrGrpInsrtdEntriesFilterId specifies for which filter the inserted entries must be grouped.
TFI tFltrGrpInsrtdEntriesFilterType	1.3.6.1.4.1.6527.3.1.2.21.20.1	TFilterType	read-write	tFltrGrpInsrtdEntriesFilterType specifies the type of the filter referred to by tFltrGrpInsrtdEntriesFilterId. Inserted entries can only occur in 'fltrtypeselIp' and 'fltrtypeselIpv6'
INT tFltrGrpInsrtdEntriesLocation	1.3.6.1.4.1.6527.3.1.2.21.20.4	INTEGER	read-write	tFltrGrpInsrtdEntriesLocation specifies at what location the inserted entries must be grouped.
INT tFltrGrpInsrtdEntriesResult	1.3.6.1.4.1.6527.3.1.2.21.20.5	INTEGER	read-only	tFltrGrpInsrtdEntriesResult indicates the success or failure of the last requested grouping request on inserted entries.
timetraFilterMIBModule	1.3.6.1.4.1.6527.1.1.3.21			This document is the SNMP MIB module to manage and provision Filter features on Alcatel-Lucent SROS systems. Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
TEN tIPFilterCreditCntrlInsertPt	1.3.6.1.4.1.6527.3.1.2.21.1.1.8	TEntryIdOrZero	read-create	The value of tIPFilterCreditCntrlInsertPt specifies at what place the filter entries received from Credit Control for a particular subscriber host will be inserted in the filter. No regular entries, nor Radius provided entries can be configured in this range. The value 0 means that no Credit Control provided filter entries can be inserted in the filter. If tIPFilterCreditCntrlInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterCreditCntrlInsertSize	1.3.6.1.4.1.6527.3.1.2.21.1.1.9	TEntryIdOrZero	read-create	The value of tIPFilterCreditCntrlInsertSize specifies how many filter entries received from Credit Control can be inserted in the filter. If tIPFilterCreditCntrlInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
U32 tIpFilterCreditCntrlNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.1.1.12	Unsigned32	read-only	The value of the object tIpFilterCreditCntrlNbrInsertd indicates how many filter entries are currently inserted in the filter on request the credit control application.
TFI tIPFilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.1.1.5	TFilterAction	read-create	The action to take for packets that do not match any filter entries. The only allowed values for this field are drop(1) and forward(2).
TIT tIPFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.1.1.4	TItemDescription	read-create	User-provided description for this filter.
tIPFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.1.1		not-accessible	Information about a particular IP Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TAN tIPFilterId	1.3.6.1.4.1.6527.3.1.2.21.1.1.1	TAnyFilterID	not-accessible	Uniquely identifies an ip filter. User configured filters can only have values between (1..65535). All other values are reserved for system generated filters.
TLN tIpFilterName	1.3.6.1.4.1.6527.3.1.2.21.1.1.14	TLNamedItemOrEmpty	read-create	The value of tIpFilterName specifies the name to associate with this filter.
tIpFilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.28.1		not-accessible	Basic information about a specific IP filter name.
TAN tIpFilterNameId	1.3.6.1.4.1.6527.3.1.2.21.28.1.1	TAnyFilterID	read-only	The value of the object tIpFilterNameId specifies the filter name associated with this IP filter.
TIM tIpFilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.28.1.3	TimeStamp	read-only	The value of tIpFilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tIpFilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.28.1.2	RowStatus	read-only	This value of the object tIpFilterNameRowStatus specifies the status of this row.
tIpFilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.28		not-accessible	A table that contains IP filter name information. Entries are created automatically by the system when tIpFilterName object is set for the IP filter.
TIM tIpFilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.27	TimeStamp	read-only	The value of tIpFilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tIpFilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFI tIPFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.2.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter.
IP tIPFilterParamsActiveDest	1.3.6.1.4.1.6527.3.1.2.21.2.1.40	IpAddress	read-only	tIPFilterParamsActiveDest indicates the IP address of the active destination for this IP filter. A value of 0 indicates that there is currently no active destination.
T/F tIPFilterParamsCflowdIfSample	1.3.6.1.4.1.6527.3.1.2.21.2.1.34	TruthValue	read-create	When tIPFilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPFilterParamsCflowdSample	1.3.6.1.4.1.6527.3.1.2.21.2.1.33	TruthValue	read-create	When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
TIT tIPFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.2.1.4	TItemDescription	read-create	User-provided description for this filter entry.
IP tIPFilterParamsDestinationIpAddr	1.3.6.1.4.1.6527.3.1.2.21.2.1.13	IpAddress	read-create	IP address to match the destination-ip of the packet.
ADR tIPFilterParamsDestinationIpMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.14	IpAddressPrefixLength	read-create	If different from 0, the object tIPFilterParamsDestinationIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is 0, and the value of tIPFilterParamsDestIpFullMask is non zero then the value of tIPFilterParamsDestIpFullMask is used as mask. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, not matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsDestIpFullMask will be set to reflect this same mask.
IP tIPFilterParamsDestIpFullMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.49	IpAddress	read-create	If different from 0, the object tIPFilterParamsDestIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, no matching is done on the Destination Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsDestIpFullMask then the value of tIPFilterParamsDestinationIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsDestinationIpMask will be set to 0.
TTC tIPFilterParamsDestPortOperator	1.3.6.1.4.1.6527.3.1.2.21.2.1.21	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsDestPortOperator is used as described in TTcpUdpPortOperator.
TTC tIPFilterParamsDestPortValue1	1.3.6.1.4.1.6527.3.1.2.21.2.1.19	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsDestPortOperator.
TTC tIPFilterParamsDestPortValue2	1.3.6.1.4.1.6527.3.1.2.21.2.1.20	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsDestPortOperator.
TDS tIPFilterParamsDSCP	1.3.6.1.4.1.6527.3.1.2.21.2.1.22	TDSCPNameOrEmpty	read-create	DSCP to be matched on the packet.
TNA tIPFilterParamsDstIpPrefixList	1.3.6.1.4.1.6527.3.1.2.21.2.1.55	TNamedItemOrEmpty	read-create	The value of the object tIPFilterParamsDstIpPrefixList specifies the ip-prefix-list to be used as match criterion for the destination ip address. If the value of this object is empty the values of the objects tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask will be used as src-ip match criterion. The value specified for this object must correspond to a prefix-list defined in tFilterPrefixListTable. When set to a non zero value, the value of the objects tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask will set to their default values. The value of this object will be set to its default value by the system if a new (non default) value is provided for any of the objects tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask. An attempt to set tIPFilterParamsDstIpPrefixList to a non-default value in combination with setting any of tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask to (a) non-default value(s) is rejected by the system. Also, setting both tIPFilterParamsDstIpPrefixList and tIPFilterParamsSrcIpPrefixList to non-default values is rejected by the system
C64 tIPFilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.37	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
C64 tIPFilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.51	Counter64	read-only	The value of tIPFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
tIPFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.2.1		not-accessible	Information about a particular IP Filter entry. Every IP Filter can have zero or more IP Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
IP tIPFilterParamsForwardNH	1.3.6.1.4.1.6527.3.1.2.21.2.1.6	IpAddress	read-create	The ip-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
T/F tIPFilterParamsForwardNHIndirect	1.3.6.1.4.1.6527.3.1.2.21.2.1.7	TruthValue	read-create	tIPFilterParamsForwardNHIndirect specifies if the nexthop is directly/ indirectly reachable.
STR tIPFilterParamsForwardNHInterface	1.3.6.1.4.1.6527.3.1.2.21.2.1.35	DisplayString	read-create	The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
TNA tIPFilterParamsForwardRedPlcy	1.3.6.1.4.1.6527.3.1.2.21.2.1.39	TNamedItemOrEmpty	read-create	tIPFilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop.
TIT tIPFilterParamsFragment	1.3.6.1.4.1.6527.3.1.2.21.2.1.24	TItemMatch	read-create	If enabled, this object matches fragmented/unfragmented packets as per the value of the object.
TMN tIPFilterParamsFwdRtrId	1.3.6.1.4.1.6527.3.1.2.21.2.1.52	TmnxVRtrIDOrZero	read-create	tIPFilterParamsFwdRtrId specifies, if different from '0', the router id of the into which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
TMN tIPFilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.2.1.43	TmnxEncapVal	read-create	tIPFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this IP filter entry. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
TMN tIPFilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.2.1.42	TmnxPortID	read-create	tIPFilterParamsFwdSapPortId specifies the sap port identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value.
SDP tIPFilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.2.1.44	SdpBindId	read-create	tIPFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSapEncapVal have a zero value.
TMN tIPFilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.2.1.41	TmnxServId	read-only	tIPFilterParamsFwdSvcId indicates the service id of the destination for this IP filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination.
INT tIPFilterParamsIcmpCode	1.3.6.1.4.1.6527.3.1.2.21.2.1.31	INTEGER	read-create	Icmp code to be matched. tIPFilterParamsIcmpCode complements the object tIPFilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
INT tIPFilterParamsIcmpType	1.3.6.1.4.1.6527.3.1.2.21.2.1.32	INTEGER	read-create	Icmp type to be matched. tIPFilterParamsIcmpType complements the object tIPFilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled.
TEN tIPFilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.2.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every ip filter can have multiple entries, therefore every ip filter entry is identified by the tIPFilterId and tIPFilterParamsIndex.
C64 tIPFilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.36	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tIPFilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.50	Counter64	read-only	The value of tIPFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
TIP tIPFilterParamsIpOptionMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.27	TIpOption	read-create	Mask is ANDed with the ip-option before being compared to tIPFilterParamsIpOptionValue.
TIP tIPFilterParamsIpOptionValue	1.3.6.1.4.1.6527.3.1.2.21.2.1.26	TIpOption	read-create	The value of the specific ip-option to match.
TFI tIPFilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.2.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
T/F tIPFilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.2.1.38	TruthValue	read-only	tIPFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
TIT tIPFilterParamsMultipleOption	1.3.6.1.4.1.6527.3.1.2.21.2.1.28	TItemMatch	read-create	If enabled, matches multiple options as per the value of the object.
TIT tIPFilterParamsOptionPresent	1.3.6.1.4.1.6527.3.1.2.21.2.1.25	TItemMatch	read-create	If enabled, this object matches packets if they have options present or not as per the value of the object.
TIP tIPFilterParamsProtocol	1.3.6.1.4.1.6527.3.1.2.21.2.1.15	TIpProtocol	read-create	IP protocol to match. set to -1 to disable matching IP protocol. If the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tIPFilterParamsTcpSyn and tIPFilterParamsTcpAck will be turned off.
STR tIPFilterParamsRedirectURL	1.3.6.1.4.1.6527.3.1.2.21.2.1.47	DisplayString	read-create	The value of tIPFilterParamsRedirectURL specifies the URL to redirect to, when the value of tIPFilterParamsAction is 'httpRedirect'. Note that the value of tIPFilterParamsRedirectURL is silently cleared by the system if tIPFilterParamsAction is set to any value other than httpRedirect.
DOT tIPFilterParamsRemarkDot1p	1.3.6.1.4.1.6527.3.1.2.21.2.1.10	Dot1PPriority	read-create	tIPFilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry.
TDS tIPFilterParamsRemarkDSCP	1.3.6.1.4.1.6527.3.1.2.21.2.1.8	TDSCPFilterActionValue	read-create	The DSCP value that should be remarked in case a packet hits this filter entry.
TDS tIPFilterParamsRemarkDSCPMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.9	TDSCPFilterActionValue	read-create	tIPFilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value.
ROW tIPFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.2.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPFilterParamsTable.
IP tIPFilterParamsSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.2.1.11	IpAddress	read-create	IP address to match the source-ip of the packet.
ADR tIPFilterParamsSourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.12	IpAddressPrefixLength	read-create	If different from 0, the object tIPFilterParamsSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is 0, and the value of tIPFilterParamsSrcIpFullMask is non zero then the value of tIPFilterParamsSrcIpFullMask is used as mask. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, not matching is done on the source Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsSrcIpFullMask will be set to reflect this same mask.
TTC tIPFilterParamsSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.21.2.1.18	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tIPFilterParamsSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.21.2.1.16	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator.
TTC tIPFilterParamsSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.21.2.1.17	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator.
IP tIPFilterParamsSrcIpFullMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.48	IpAddress	read-create	If different from 0, the object tIPFilterParamsSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, no matching is done on the Source Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsSrcIpFullMask then the value of tIPFilterParamsSourceIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsSourceIpMask will be set to 0.
TNA tIPFilterParamsSrcIpPrefixList	1.3.6.1.4.1.6527.3.1.2.21.2.1.54	TNamedItemOrEmpty	read-create	The value of the object tIPFilterParamsSrcIpPrefixList specifies the ip-prefix-list to be used as match criterion for the source ip address. If the value of this object is empty then the values of the objects tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask will be used as src-ip match criterion. The value specified for this object must correspond to a prefix-list defined in tFilterPrefixListTable. When set to a non zero value, the value of the objects tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask will set to their default values. The value of this object will be set to its default value by the system if a new (non default) value is provided for any of the objects tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask. An attempt to set tIPFilterParamsSrcIpPrefixList to a non-default value in combination with setting any of tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask to (a) non-default value(s) is rejected by the system. Also, setting both tIPFilterParamsSrcIpPrefixList and tIPFilterParamsDstIpPrefixList to non-default values is rejected by the system
TIT tIPFilterParamsSrcRouteOption	1.3.6.1.4.1.6527.3.1.2.21.2.1.53	TItemMatch	read-create	tIPFilterParamsSrcRouteOption specifies, when enabled, that this filter should match if a (strict or loose) source route option is present/not present at any location within the IP header, as per the value of this object.
tIPFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.2		not-accessible	A table of all IP filter match entries for all IP filters.
TIT tIPFilterParamsTcpAck	1.3.6.1.4.1.6527.3.1.2.21.2.1.30	TItemMatch	read-create	If Enabled, matches a TCP Ack as per value of the object.
TIT tIPFilterParamsTcpSyn	1.3.6.1.4.1.6527.3.1.2.21.2.1.29	TItemMatch	read-create	If Enabled, matches a TCP Syn as per value of the object.
TNA tIPFilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.2.1.45	TNamedItemOrEmpty	read-create	tIPFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TTI tIPFilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.2.1.46	TTimeRangeState	read-only	tIPFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
NTF tIPFilterPBRPacketsDrop	1.3.6.1.4.1.6527.3.1.3.21.0.1			The tIPFilterPBRPacketsDrop event is generated either when the configuration of a forwarding action refers to an invalid/unconfigured next-hop or if the active interface goes down operationally in the process of active filtering.
TEN tIPFilterRadiusInsertPt	1.3.6.1.4.1.6527.3.1.2.21.1.1.6	TEntryIdOrZero	read-create	The value of tIPFilterRadiusInsertPt specifies at what place the filter entries received from Radius will be inserted in the filter. No regular entries, nor Credit Control provided entries can be configured in this range. The value 0 means that no Radius provided filter entries can be inserted in the filter. If tIPFilterRadiusInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterRadiusInsertSize	1.3.6.1.4.1.6527.3.1.2.21.1.1.7	TEntryIdOrZero	read-create	The value of tIPFilterRadiusInsertSize specifies how many filter entries received from Radius for subscriber hosts can be inserted in the filter. If tIPFilterRadiusInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
U32 tIpFilterRadiusNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.1.1.13	Unsigned32	read-only	The value of the object tIpFilterRadiusNbrInsertd indicates how many filter entries are currently inserted in the filter on request the RADIUS application.
ROW tIPFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.1.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPFilterTable.
TIT tIPFilterScope	1.3.6.1.4.1.6527.3.1.2.21.1.1.3	TItemScope	read-create	This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
I32 tIPFilterSubInsertHighWmark	1.3.6.1.4.1.6527.3.1.2.21.1.1.10	Integer32	read-create	The value of the object tIPFilterSubInsertHighWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be raised by the agent.
I32 tIPFilterSubInsertLowWmark	1.3.6.1.4.1.6527.3.1.2.21.1.1.11	Integer32	read-create	The value of the object tIPFilterSubInsertLowWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be cleared by the agent.
tIPFilterTable	1.3.6.1.4.1.6527.3.1.2.21.1		not-accessible	Contains a List of all ip filters configured on this system.
tIPFilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.12			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 4.0 release.
tIPFilterV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.17			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 5.0 release.
tIPFilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.22			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 6.0 release.
tIPFilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.25			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 8.0 release.
tIPFilterV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.31			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 9.0 release.
TEN tIPv6FilterCreditCntrlInsertPt	1.3.6.1.4.1.6527.3.1.2.21.18.1.8	TEntryIdOrZero	read-create	The value of tIPv6FilterCreditCntrlInsertPt specifies at what place the filter entries received from Credit Control for a particular subscriber host will be inserted in the filter. No regular entries, nor Radius provided entries can be configured in this range. The value 0 means that no Credit Control provided filter entries can be inserted in the filter. If tIPv6FilterCreditCntrlInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterCreditCntrlInsertSize	1.3.6.1.4.1.6527.3.1.2.21.18.1.9	TEntryIdOrZero	read-create	The value of tIPv6FilterCreditCntrlInsertSize specifies how many filter entries received from Credit Control can be inserted in the filter. If tIPv6FilterCreditCntrlInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
U32 tIpv6FilterCreditCntrlNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.18.1.12	Unsigned32	read-only	The value of the object tIpv6FilterCreditCntrlNbrInsertd indicates how many filter entries are currently inserted in the filter on request the credit control application.
TFI tIPv6FilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.18.1.5	TFilterAction	read-create	The value of the object tIPv6FilterDefaultAction specifies the action to be taken for packets that do not match any of the filter entries. The only allowed values for this field are drop(1) and forward(2).
TIT tIPv6FilterDescription	1.3.6.1.4.1.6527.3.1.2.21.18.1.4	TItemDescription	read-create	The value of the object tIPv6FilterDescription specifies a user-provided description for this filter.
tIPv6FilterEntry	1.3.6.1.4.1.6527.3.1.2.21.18.1		not-accessible	Information about a particular IPv6 Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TIP tIPv6FilterId	1.3.6.1.4.1.6527.3.1.2.21.18.1.1	TIPFilterID	not-accessible	The value of the object tIPv6FilterId uniquely identifies a IPv6 filter on this system.
TLN tIpv6FilterName	1.3.6.1.4.1.6527.3.1.2.21.18.1.14	TLNamedItemOrEmpty	read-create	The value of tIpv6FilterName specifies the name to associate with this filter.
tIpv6FilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.30.1		not-accessible	Basic information about a specific IPv6 filter name.
TAN tIpv6FilterNameId	1.3.6.1.4.1.6527.3.1.2.21.30.1.1	TAnyFilterID	read-only	The value of the object tIpv6FilterNameId specifies the filter name associated with this IPv6 filter.
TIM tIpv6FilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.30.1.3	TimeStamp	read-only	The value of tIpv6FilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tIpv6FilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.30.1.2	RowStatus	read-only	This value of the object tIpv6FilterNameRowStatus specifies the status of this row.
tIpv6FilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.30		not-accessible	A table that contains IPv6 filter name information. Entries are created automatically by the system when tIpv6FilterName object is set for the IPv6 filter.
TIM tIpv6FilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.29	TimeStamp	read-only	The value of tIpv6FilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tIpv6FilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFI tIPv6FilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.19.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. The value nat(5) is not supported.
ADR tIPv6FilterParamsActiveDest	1.3.6.1.4.1.6527.3.1.2.21.19.1.34	InetAddressIPv6	read-only	tIPv6FilterParamsActiveDest indicates the IPv6 address of the active destination for this IPv6 filter. A value of 0 indicates that there is currently no active destination.
T/F tIPv6FilterParamsCflowdIfSample	1.3.6.1.4.1.6527.3.1.2.21.19.1.28	TruthValue	read-create	When tIPv6FilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPv6FilterParamsCflowdSample	1.3.6.1.4.1.6527.3.1.2.21.19.1.27	TruthValue	read-create	When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
TIT tIPv6FilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.19.1.4	TItemDescription	read-create	User-provided description for this filter entry.
ADR tIPv6FilterParamsDestinationIpAddr	1.3.6.1.4.1.6527.3.1.2.21.19.1.13	InetAddressIPv6	read-create	IPv6 address to match the destination-ip of the packet.
ADR tIPv6FilterParamsDestinationIpMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.14	InetAddressPrefixLength	read-create	The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsDestinationIpAddr.
TTC tIPv6FilterParamsDestPortOperator	1.3.6.1.4.1.6527.3.1.2.21.19.1.21	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used.
TTC tIPv6FilterParamsDestPortValue1	1.3.6.1.4.1.6527.3.1.2.21.19.1.19	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator.
TTC tIPv6FilterParamsDestPortValue2	1.3.6.1.4.1.6527.3.1.2.21.19.1.20	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator.
TDS tIPv6FilterParamsDSCP	1.3.6.1.4.1.6527.3.1.2.21.19.1.22	TDSCPNameOrEmpty	read-create	DSCP to be matched on the packet.
C64 tIPv6FilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.31	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
C64 tIPv6FilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.38	Counter64	read-only	This tIPv6FilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
tIPv6FilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.19.1		not-accessible	Information about a particular IPv6 Filter entry. Every IPv6 Filter can have zero or more IPv6 Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
ADR tIPv6FilterParamsForwardNH	1.3.6.1.4.1.6527.3.1.2.21.19.1.6	InetAddressIPv6	read-create	The ipv6-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
T/F tIPv6FilterParamsForwardNHIndirect	1.3.6.1.4.1.6527.3.1.2.21.19.1.7	TruthValue	read-create	tIPv6FilterParamsForwardNHIndirect specifies if the nexthop is directly or indirectly reachable.
STR tIPv6FilterParamsForwardNHInterface	1.3.6.1.4.1.6527.3.1.2.21.19.1.29	DisplayString	read-create	The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
TNA tIPv6FilterParamsForwardRedPlcy	1.3.6.1.4.1.6527.3.1.2.21.19.1.33	TNamedItemOrEmpty	read-create	tIPv6FilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop.
TMN tIPv6FilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.19.1.41	TmnxEncapVal	read-create	tIPv6FilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this filter entry. A value different from 0 can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPv6FilterParamsFwdSdpBind has value '0'. The value 0 indicates that either 1) the sap encapsulation value is not specified when tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
TMN tIPv6FilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.19.1.40	TmnxPortID	read-create	tIPv6FilterParamsFwdSapPortId specifies the sap port id of the destination for this filter entry. The value 0 indicates that there is no SAP destination defined. A value different from 0 can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPv6FilterParamsFwdSdpBind is '0'.
SDP tIPv6FilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.19.1.42	SdpBindId	read-create	tIPv6FilterParamsFwdSdpBind specifies the sdp bind id of the destination for this filter entry. The value '0' indicates that there is currently no SDP binding defined. A value different from '0' can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSapEncapVal have value 0.
TMN tIPv6FilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.19.1.39	TmnxServId	read-only	tIPv6FilterParamsFwdSvcId indicates the service id of the destination for this filter entry. The value 0 indicates that there is no active SAP or SDP destination.
INT tIPv6FilterParamsIcmpCode	1.3.6.1.4.1.6527.3.1.2.21.19.1.25	INTEGER	read-create	Icmp code to be matched. tIPv6FilterParamsIcmpCode complements the object tIPv6FilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
INT tIPv6FilterParamsIcmpType	1.3.6.1.4.1.6527.3.1.2.21.19.1.26	INTEGER	read-create	Icmp type to be matched. tIPv6FilterParamsIcmpType complements the object tIPv6FilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled.
TEN tIPv6FilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.19.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every IPv6 filter can have multiple entries, therefore every IPv6 filter entry is identified by the tIPv6FilterId and tIPv6FilterParamsIndex.
C64 tIPv6FilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.30	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tIPv6FilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.37	Counter64	read-only	The value of tIPv6FilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
TFI tIPv6FilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.19.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
T/F tIPv6FilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.19.1.32	TruthValue	read-only	tIPv6FilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
TIP tIPv6FilterParamsNextHeader	1.3.6.1.4.1.6527.3.1.2.21.19.1.15	TIpProtocol	read-create	IPv6 next header to match. set to -1 to disable matching IPv6 next header. If the next header is changed the next header specific parameters are reset. For instance if next header is changed from TCP to UDP, then the objects tIPv6FilterParamsTcpSyn and tIPv6FilterParamsTcpAck will be turned off. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
DOT tIPv6FilterParamsRemarkDot1p	1.3.6.1.4.1.6527.3.1.2.21.19.1.10	Dot1PPriority	read-create	tIPv6FilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry.
TDS tIPv6FilterParamsRemarkDSCP	1.3.6.1.4.1.6527.3.1.2.21.19.1.8	TDSCPFilterActionValue	read-create	The DSCP value that should be remarked in case a packet hits this filter entry.
TDS tIPv6FilterParamsRemarkDSCPMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.9	TDSCPFilterActionValue	read-create	tIPv6FilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value.
ROW tIPv6FilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.19.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPv6FilterParamsTable.
ADR tIPv6FilterParamsSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.19.1.11	InetAddressIPv6	read-create	IPv6 address to match the source-ip of the packet.
ADR tIPv6FilterParamsSourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.12	InetAddressPrefixLength	read-create	The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsSourceIpAddr.
TTC tIPv6FilterParamsSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.21.19.1.18	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used.
TTC tIPv6FilterParamsSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.21.19.1.16	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator.
TTC tIPv6FilterParamsSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.21.19.1.17	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator.
tIPv6FilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.19		not-accessible	A table of all IPv6 filter match entries for all IPv6 filters.
TIT tIPv6FilterParamsTcpAck	1.3.6.1.4.1.6527.3.1.2.21.19.1.24	TItemMatch	read-create	If Enabled, matches a TCP Ack as per value of the object.
TIT tIPv6FilterParamsTcpSyn	1.3.6.1.4.1.6527.3.1.2.21.19.1.23	TItemMatch	read-create	If Enabled, matches a TCP Syn as per value of the object.
TNA tIPv6FilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.19.1.35	TNamedItemOrEmpty	read-create	tIPv6FilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TTI tIPv6FilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.19.1.36	TTimeRangeState	read-only	tIPv6FilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPv6FilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
TEN tIPv6FilterRadiusInsertPt	1.3.6.1.4.1.6527.3.1.2.21.18.1.6	TEntryIdOrZero	read-create	The value of tIPv6FilterRadiusInsertPt specifies at what place the filter entries received from Radius will be inserted in the filter. No regular entries, nor Credit Control provided entries can be configured in this range. The value 0 means that no Radius provided filter entries can be inserted in the filter. If tIPv6FilterRadiusInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterRadiusInsertSize	1.3.6.1.4.1.6527.3.1.2.21.18.1.7	TEntryIdOrZero	read-create	The value of tIPv6FilterRadiusInsertSize specifies how many filter entries received from Radius for subscriber hosts can be inserted in the filter. If tIPv6FilterRadiusInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
U32 tIpv6FilterRadiusNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.18.1.13	Unsigned32	read-only	The value of the object tIpv6FilterRadiusNbrInsertd indicates how many filter entries are currently inserted in the filter on request the RADIUS application.
ROW tIPv6FilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.18.1.2	RowStatus	read-create	The value of the object tIPv6FilterRowStatus specifies the status of the IPv6 filter. The object allows entries to be created and deleted in the tIPv6FilterTable.
TIT tIPv6FilterScope	1.3.6.1.4.1.6527.3.1.2.21.18.1.3	TItemScope	read-create	The value of the object tIPv6FilterScope specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
I32 tIPv6FilterSubInsertHighWmark	1.3.6.1.4.1.6527.3.1.2.21.18.1.10	Integer32	read-create	The value of the object tIPv6FilterSubInsertHighWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be raised by the agent. The value 0 indicates that no alarm will be generated.
I32 tIPv6FilterSubInsertLowWmark	1.3.6.1.4.1.6527.3.1.2.21.18.1.11	Integer32	read-create	The value of the object tIPv6FilterSubInsertLowWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be cleared by the agent.
tIPv6FilterTable	1.3.6.1.4.1.6527.3.1.2.21.18		not-accessible	Contains a List of all IPv6 filters configured on this system.
tIPv6FilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.35			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPv6FilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.11			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPv6FilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.24			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPv6FilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.26			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tLiFilterAssociationEntry	1.3.6.1.4.1.6527.3.1.2.21.31.8.1		not-accessible	An association between an LI filter and a normal filter.
TFI tLiFilterAssociationFltrId	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.1	TFilterID	not-accessible	The object tLiFilterAssociationFltrId indicates the id of the normal filter in the association described by this entry.
TIM tLiFilterAssociationLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.3	TimeStamp	read-only	The object tLiFilterAssociationLastChg indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tLiFilterAssociationRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.2	RowStatus	read-create	The object tLiFilterAssociationRowStatus specifies the status of this row.
tLiFilterAssociationTable	1.3.6.1.4.1.6527.3.1.2.21.31.8		not-accessible	The table tLiFilterAssociationTable contains information about the associations between LI filters and normal filters.
TIM tLiFilterAssociationTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.7	TimeStamp	read-only	The object tLiFilterAssociationTableLastChg indicates the sysUpTime at the time of the last modification of tLiFilterTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tLiFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.5	TItemDescription	read-create	The object tLiFilterDescription specifies a description for this LI MAC filter.
tLiFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.31.6.1		not-accessible	An LI MAC filter.
TIM tLiFilterLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.4	TimeStamp	read-only	The object tLiFilterLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TNA tLiFilterName	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.2	TNamedItem	not-accessible	The object tLiFilterName indicates the unique name of this LI MAC Filter.
ROW tLiFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.3	RowStatus	read-create	The object tLiFilterRowStatus specifies the status of this row.
tLiFilterTable	1.3.6.1.4.1.6527.3.1.2.21.31.6		not-accessible	The table tLiFilterTable contains information about all LI MAC filters.
TIM tLiFilterTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.5	TimeStamp	read-only	The object tLiFilterTableLastChanged indicates the sysUpTime at the time of the last modification of tLiFilterTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFI tLiFilterType	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.1	TFilterType	not-accessible	The object tLiFilterType specifies the type of this LI filter. In this release only MAC filters are supported.
tLiFilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.38			The group of objects supporting management of LI filter entries on Alcatel-Lucent SROS series systems 10.0 release.
TIT tLiMacFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.4	TItemDescription	read-create	The object tLiMacFilterParamsDescription specifies a description for this entry.
MAC tLiMacFilterParamsDstMAC	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.8	MacAddress	read-create	The object tLiMacFilterParamsDstMAC specifies the destination MAC to match for this LI MAC filter entry.
MAC tLiMacFilterParamsDstMACMask	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.9	MacAddress	read-create	The object tLiMacFilterParamsDstMACMask specifies the destination MAC mask value for this LI MAC filter match entry. The mask is ANDed with the MAC to match tLiMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tLiMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria. If set to all zero, the value of tLiMacFilterParamsDstMAC will bet set to all zero by the system, and any attept to change this value will be ignored.
C64 tLiMacFilterParamsEgrHitBytes	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.13	Counter64	read-only	The value of tLiMacFilterParamsEgrHitBytes indicates the number of bytes of all egress packets that matched this entry.
C64 tLiMacFilterParamsEgrHitCount	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.11	Counter64	read-only	This object tLiMacFilterParamsEgrHitCount indicates the number of times an egress packet matched this entry.
tLiMacFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.31.10.1		not-accessible	An LI MAC filter match entry.
TFR tLiMacFilterParamsFrameType	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.5	TFrameType	read-create	The object tLiMacFilterParamsFrameType specifies the type of mac frame for which we are defining this match criterium.
TEN tLiMacFilterParamsId	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.1	TEntryId	not-accessible	The object tLiMacFilterParamsId indicates the secondary index for this entry. Every LI MAC filter may have multiple match entries, therefore every LI MAC filter match entry is identified by the tLiFilterName and tLiMacFilterParamsId.
C64 tLiMacFilterParamsIngrHitBytes	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.12	Counter64	read-only	The value of tLiMacFilterParamsIngrHitBytes indicates the number of bytes of all ingress packets that matched this entry.
C64 tLiMacFilterParamsIngrHitCount	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.10	Counter64	read-only	The object tLiMacFilterParamsIngrHitCount indicates the number of times an ingress packet matched this entry.
TIM tLiMacFilterParamsLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.3	TimeStamp	read-only	The object tLiMacFilterParamsLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tLiMacFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.2	RowStatus	read-create	The object tLiMacFilterParamsRowStatus specifies the status of this row.
MAC tLiMacFilterParamsSrcMAC	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.6	MacAddress	read-create	The object tLiMacFilterParamsSrcMAC specifies the source MAC address to match for this LI MAC filter entry.
MAC tLiMacFilterParamsSrcMACMask	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.7	MacAddress	read-create	The object tLiMacFilterParamsSrcMACMask specifies the source MAC mask value for this LI MAC filter match entry. The mask is ANDed with the MAC to match tLiMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. A one bit means match this bit with tLiMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criterium. If set to all zero, the value of tLiMacFilterParamsSrcMAC will bet set to all zero by the system, and any attept to change this value will be ignored.
tLiMacFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.31.10		not-accessible	The table tLiMacFilterParamsTable contains all LI MAC filter match entries for all LI MAC filters.
TIM tLiMacFilterParamsTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.9	TimeStamp	read-only	The object tLiMacFilterParamsTableLastChg indicates the sysUpTime at the time of the last modification of tLiMacFilterParamsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tLiReservedBlockDescription	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.4	TItemDescription	read-create	The object tLiReservedBlockDescription specifies a description for this LI reserved block.
tLiReservedBlockEntry	1.3.6.1.4.1.6527.3.1.2.21.31.2.1		not-accessible	Information about an LI reserved block. This block can be associated with one or more filters to reserve a number of entries in those filters for LI.
tLiReservedBlockFltrEntry	1.3.6.1.4.1.6527.3.1.2.21.31.4.1		not-accessible	An association of a normal filter with an LI block reservation. In this release, only MAC filters are supported.
TFI tLiReservedBlockFltrIdEnd	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.3	TFilterID	not-accessible	The object tLiReservedBlockFltrIdEnd specifies the ID of the last filter to apply an LI block reservation. In this release, tLiReservedBlockFltrIdEnd must be equal to tLiReservedBlockFltrIdStart.
TFI tLiReservedBlockFltrIdStart	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.2	TFilterID	not-accessible	The object tLiReservedBlockFltrIdStart specifies the ID of the first filter to apply an LI block reservation. In this release, tLiReservedBlockFltrIdStart must be equal to tLiReservedBlockFltrIdEnd.
TIM tLiReservedBlockFltrLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.5	TimeStamp	read-only	The object tLiReservedBlockFltrLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tLiReservedBlockFltrRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.4	RowStatus	read-create	The object tLiReservedBlockFltrRowStatus specifies the status of this row.
tLiReservedBlockFltrTable	1.3.6.1.4.1.6527.3.1.2.21.31.4		not-accessible	The table tLiReservedBlockFltrTable contains associations between normal filters and LI block reservations.
TIM tLiReservedBlockFltrTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.3	TimeStamp	read-only	The value of tLiReservedBlockFltrTableLastChg indicates the sysUpTime at the time of the last modification of tLiReservedBlockFltrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFI tLiReservedBlockFltrType	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.1	TFilterType	not-accessible	The object tLiReservedBlockFltrType specifies the type of filter this LI block reservation applies to. In this release only MAC filters are supported.
TIM tLiReservedBlockLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.3	TimeStamp	read-only	The object tLiReservedBlockLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TNA tLiReservedBlockName	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.1	TNamedItem	not-accessible	The object tLiReservedBlockName uniquely identifies an LI reserved block.
ROW tLiReservedBlockRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.2	RowStatus	read-create	The object tLiReservedBlockRowStatus specifies the status of this row.
TEN tLiReservedBlockSize	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.6	TEntryIdOrZero	read-create	The object tLiReservedBlockSize specifies the size of the LI reserved block. If set to '0' no block is reserved. In this case the value of the object tLiReservedBlockStart will be set to '0' by the system.
TEN tLiReservedBlockStart	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.5	TEntryIdOrZero	read-create	The object tLiReservedBlockStart specifies the starting entry of the LI reserved block. If set to '0' no block is reserved. In this case the value of the object tLiReservedBlockSize will be set to '0' by the system.
tLiReservedBlockTable	1.3.6.1.4.1.6527.3.1.2.21.31.2		not-accessible	The table tLiReservedBlockTable describes LI reserved blocks. In this release this table can have at most one entry.
TIM tLiReservedBlockTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.1	TimeStamp	read-only	The object tLiReservedBlockTableLastChanged indicates the sysUpTime at the time of the last modification of tLiReservedBlockTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFI tMacFilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.3.1.5	TFilterAction	read-create	The action to take for packets that do not match any filter entries. The only allowed values for this field are drop(1) and forward(2).
TIT tMacFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.3.1.4	TItemDescription	read-create	User-provided description for this filter.
tMacFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.3.1		not-accessible	Information about a particular MAC Filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TMA tMacFilterId	1.3.6.1.4.1.6527.3.1.2.21.3.1.1	TMACFilterID	not-accessible	Uniquely identifies a mac filter as configures on this system.
TLN tMacFilterName	1.3.6.1.4.1.6527.3.1.2.21.3.1.7	TLNamedItemOrEmpty	read-create	The value of tMacFilterName specifies the name to associate with this filter.
tMacFilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.26.1		not-accessible	Basic information about a specific MAC filter name.
TAN tMacFilterNameId	1.3.6.1.4.1.6527.3.1.2.21.26.1.1	TAnyFilterID	read-only	The value of the object tMacFilterNameId specifies the filter name associated with this MAC filter.
TIM tMacFilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.26.1.3	TimeStamp	read-only	The value of tMacFilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
ROW tMacFilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.26.1.2	RowStatus	read-only	This value of the object tMacFilterNameRowStatus specifies the status of this row.
tMacFilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.26		not-accessible	A table that contains MAC filter name information. Entries are created automatically by the system when tMacFilterName object is set for the MAC filter.
TIM tMacFilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.25	TimeStamp	read-only	The value of tMacFilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tMacFilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TFI tMacFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.4.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. The value nat(5) is not allowed.
TIT tMacFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.4.1.4	TItemDescription	read-create	User-provided description for this filter entry.
DOT tMacFilterParamsDot1pMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.13	Dot1PPriority	read-create	IEEE 802.1p priority mask value for this policy MAC filter entry. Use zero to disable matching, use 7 to match everything.
DOT tMacFilterParamsDot1pValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.12	Dot1PPriority	read-create	IEEE 802.1p priority value for this policy MAC filter entry. Use -1 to disable matching this filter criteria.
NUM tMacFilterParamsDsap	1.3.6.1.4.1.6527.3.1.2.21.4.1.15	ServiceAccessPoint	read-create	MAC DSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified together to the default value.
NUM tMacFilterParamsDsapMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.16	ServiceAccessPoint	read-create	MAC DSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified together to the default value.
MAC tMacFilterParamsDstMAC	1.3.6.1.4.1.6527.3.1.2.21.4.1.10	MacAddress	read-create	Destination MAC mask value for this policy MAC filter entry.
MAC tMacFilterParamsDstMACMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.11	MacAddress	read-create	Destination MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria.
C64 tMacFilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.22	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
C64 tMacFilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.32	Counter64	read-only	The value of tMacFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
tMacFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.4.1		not-accessible	Information about a particular MAC Filter entry. Every MAC Filter can have zero or more MAC Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
INT tMacFilterParamsEtherType	1.3.6.1.4.1.6527.3.1.2.21.4.1.14	INTEGER	read-create	Ethertype for this policy MAC filter entry. Use -1 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to Ethernet_II.
TFR tMacFilterParamsFrameType	1.3.6.1.4.1.6527.3.1.2.21.4.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria. For filter entries in a Mac filter of type tMacFilterType = dot1q or tMacFilterType qinq the default value for this object is set to ethernetII (3), and no changes are allowed. In all other cases the default value is set to e802dot3 (0)
TMN tMacFilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.4.1.26	TmnxEncapVal	read-create	tMacFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this Mac filter entry. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, the tMacFilterParamsFwdSapPortId object has a non zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
TMN tMacFilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.4.1.25	TmnxPortID	read-create	tMacFilterParamsFwdSapPortId specifies the sap port identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value.
SDP tMacFilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.4.1.27	SdpBindId	read-create	tMacFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSapEncapVal have a zero value.
TMN tMacFilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.4.1.24	TmnxServId	read-only	tMacFilterParamsFwdSvcId indicates the service id of the destination for this Mac filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination.
SVC tMacFilterParamsHighISID	1.3.6.1.4.1.6527.3.1.2.21.4.1.34	SvcISID	read-create	The value of tMacFilterParamsHighISID specifies the highest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The default value of -1 indicates no ISID matching will be performed. The value of this field can be equal to but not higher than the value of the tMacFilterParamsLowISID field. Changing the value of this field might also change the value of tMacFilterParamsLowISID: A value of -1 will change the value of tMacFilterParamsLowISID to -1. Changing the value of this field from -1 to any other value will change the value of tMacFilterParamsLowISID to this same value. Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only be set if tMacFilterType is set to 'isid(1)'.
TEN tMacFilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.4.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every mac filter can have multiple entries, therefore every mac filter entry is identified by the tMacFilterId and tMacFilterParamsIndex.
C64 tMacFilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.21	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tMacFilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.31	Counter64	read-only	The value of tMacFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
QTA tMacFilterParamsInnerTagMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.36	QTagFullRange	read-create	The value of tMacFilterParamsInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tMacFilterParamsInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'.
QTA tMacFilterParamsInnerTagValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.35	QTagFullRangeOrNone	read-create	The value of tMacFilterParamsInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'. The (default) value of '-1' indicates no inner VLAN tag matching will be performed.
TFI tMacFilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.4.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
T/F tMacFilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.4.1.23	TruthValue	read-only	tMacFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
SVC tMacFilterParamsLowISID	1.3.6.1.4.1.6527.3.1.2.21.4.1.33	SvcISID	read-create	The value of tMacFilterParamsLowISID specifies the lowest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The default value of -1 indicates no ISID matching will be performed. The value of this field can be equal to but not lower than the value of the tMacFilterParamsHighISID field. Changing the value of this field might also change the value of tMacFilterParamsHighISID: A value of -1 will change the value of tMacFilterParamsHighISID to -1. Changing the value of this field from -1 to any other value will change the value of tMacFilterParamsHighISID to this same value. Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only be set if tMacFilterType is set to 'isid(1)'.
QTA tMacFilterParamsOuterTagMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.38	QTagFullRange	read-create	The value of tMacFilterParamsOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tMacFilterParamsOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'.
QTA tMacFilterParamsOuterTagValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.37	QTagFullRangeOrNone	read-create	The value of tMacFilterParamsOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
STR tMacFilterParamsRedirectURL	1.3.6.1.4.1.6527.3.1.2.21.4.1.30	DisplayString	read-create	The value of tMacFilterParamsRedirectURL specifies the URL to redirect to, when the value of tMacFilterParamsAction is 'httpRedirect'.
ROW tMacFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.4.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tMacFilterParamsTable.
INT tMacFilterParamsSnapOui	1.3.6.1.4.1.6527.3.1.2.21.4.1.20	INTEGER	read-create	MAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what to match. Matching can be disabled by the use of the value off(1). This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2SNAP.
INT tMacFilterParamsSnapPid	1.3.6.1.4.1.6527.3.1.2.21.4.1.19	INTEGER	read-create	MAC SNAP PID to match for this policy MAC filter entry. use -1 to disable matching by this criteria. This object has no significance if object tMacFilterParamsFrameType is not set to 802dot2SNAP.
MAC tMacFilterParamsSrcMAC	1.3.6.1.4.1.6527.3.1.2.21.4.1.8	MacAddress	read-create	Source MAC to match for this policy MAC filter entry.
MAC tMacFilterParamsSrcMACMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.9	MacAddress	read-create	Source MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria.
NUM tMacFilterParamsSsap	1.3.6.1.4.1.6527.3.1.2.21.4.1.17	ServiceAccessPoint	read-create	MAC SSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified together to the default value.
NUM tMacFilterParamsSsapMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.18	ServiceAccessPoint	read-create	MAC SSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified together to the default value.
tMacFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.4		not-accessible	A table of all MAC filter match entries for all MAC filters.
TNA tMacFilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.4.1.28	TNamedItemOrEmpty	read-create	tMacFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TTI tMacFilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.4.1.29	TTimeRangeState	read-only	tMacFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tMacFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tMacFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tMacFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
ROW tMacFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.3.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tMacFilterTable.
TIT tMacFilterScope	1.3.6.1.4.1.6527.3.1.2.21.3.1.3	TItemScope	read-create	This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
tMacFilterTable	1.3.6.1.4.1.6527.3.1.2.21.3		not-accessible	Contains a List of all mac filters configured on this system.
TMA tMacFilterType	1.3.6.1.4.1.6527.3.1.2.21.3.1.6	TMacFilterType	read-create	tMacFilterType specifies which type of entries this mac filter can contain. If tMacFilterType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type isid(2) and vid(3). if tMacFilterType is set to 'isid(2)' the only accepted match criteria for the filter entries are: - tMacFilterParamsLowISID - tMacFilterParamsHighISID If tMacFilterType is set to vid(3) the only accepted match criteria for the filter entries are: - tMacFilterParamsInnerTagValue - tMacFilterParamsInnerTagMask - tMacFilterParamsOuterTagValue - tMacFilterParamsOuterTagMask tMacFilterType can only be changed if the filter is not applied and has no entries.
tMacFilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.13			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 4.0 release.
tMacFilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.23			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 6.0 release.
tMacFilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.29			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 8.0 release.
tMacFilterVidFilteringV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.30			The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
tmnxFilterObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.21.2.15			The group of objects in TIMETRA-FILTER-MIB which are obsoleted.
tTodPolicies77450V5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.19			The group of objects supporting management of time of day policy related objects on Alcatel 7450 ESS series systems 5.0 release. This group was made obsolete for Alcatel SROS Release 9.0.
tTodPolicies77x0V5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.20			The group of objects supporting management of time of day policy related objects on Alcatel 77x0 series systems 5.0 release.
tTodPoliciesV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.14			The group of objects supporting management of time of day policy related objects on Alcatel-Lucent SROS series systems 4.0 release.
tToDPoliciesV5v0NotifyGroup	1.3.6.1.4.1.6527.3.1.1.21.2.16			The group of notifications generated by the time of time of day policy feature on Alcatel-Lucent SROS series systems 5.0 release.

OID symbolic	OID numeric	Type	Access	Description
timetraFilterMIBModule	1.3.6.1.4.1.6527.1.1.3.21			This document is the SNMP MIB module to manage and provision Filter features on Alcatel-Lucent SROS systems. Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tFilterMIBConformance	1.3.6.1.4.1.6527.3.1.1.21
tFilterMIBCompliances	1.3.6.1.4.1.6527.3.1.1.21.1
tFilter7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.4			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R4.0.
tFilter7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.5			The compliance statement for management of Filter features on Alcatel 7750 SR series systems release R4.0.
tFilter7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.6			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0.
tFilter77x0V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.7			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0.
tFilter7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.8			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0.
tFilter77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.9			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0.
tFilter7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.10			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R8.0.
tFilter77x0V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.11			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R8.0.
tFilter7xxxV9v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.12			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R9.0.
tFilter7xxxV10v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.13			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R10.0.
tFilterMIBGroups	1.3.6.1.4.1.6527.3.1.1.21.2
tFilterLogGroup	1.3.6.1.4.1.6527.3.1.1.21.2.3			The group of objects supporting management of filter log objects on Alcatel-Lucent SROS series systems.
tFilterRedirectPolicyGroup	1.3.6.1.4.1.6527.3.1.1.21.2.4			The group of objects supporting management of filter redirect policy objects on Alcatel-Lucent SROS series systems.
tFilterScalarGroup	1.3.6.1.4.1.6527.3.1.1.21.2.7			The group of objects supporting management of filter scalar objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjGroup	1.3.6.1.4.1.6527.3.1.1.21.2.8			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationsGroup	1.3.6.1.4.1.6527.3.1.1.21.2.9			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tIPv6FilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.11			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPFilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.12			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 4.0 release.
tMacFilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.13			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 4.0 release.
tTodPoliciesV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.14			The group of objects supporting management of time of day policy related objects on Alcatel-Lucent SROS series systems 4.0 release.
tmnxFilterObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.21.2.15			The group of objects in TIMETRA-FILTER-MIB which are obsoleted.
tToDPoliciesV5v0NotifyGroup	1.3.6.1.4.1.6527.3.1.1.21.2.16			The group of notifications generated by the time of time of day policy feature on Alcatel-Lucent SROS series systems 5.0 release.
tIPFilterV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.17			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 5.0 release.
tFilterLogV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.18			The group of objects supporting Filter Log Summarization on Alcatel 7x50 ESS/SR series systems 5.0 release.
tTodPolicies77450V5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.19			The group of objects supporting management of time of day policy related objects on Alcatel 7450 ESS series systems 5.0 release. This group was made obsolete for Alcatel SROS Release 9.0.
tTodPolicies77x0V5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.20			The group of objects supporting management of time of day policy related objects on Alcatel 77x0 series systems 5.0 release.
tFilterNotificationObjV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.21			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tIPFilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.22			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 6.0 release.
tMacFilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.23			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 6.0 release.
tIPv6FilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.24			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPFilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.25			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 8.0 release.
tIPv6FilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.26			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.27			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationsV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.28			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tMacFilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.29			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 8.0 release.
tMacFilterVidFilteringV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.30			The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
tIPFilterV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.31			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 9.0 release.
tFilterNotificationsV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.32			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.33			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tDhcpFilterV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.34			The group of objects supporting DHCP Filters on Alcatel 7x50 ESS/SR series systems 9.0 release.
tIPv6FilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.35			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tFilterNameV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.36			The group of objects supporting management of filter-name objects on Alcatel-Lucent SROS series systems.
tDhcpFilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.37			The group of objects supporting DHCP Filters on Alcatel 7x50 ESS/SR series systems 10.0 release.
tLiFilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.38			The group of objects supporting management of LI filter entries on Alcatel-Lucent SROS series systems 10.0 release.
tFilterPrefixListV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.39			The group of objects supporting management of IP prefix lists in IP filters on Alcatel-Lucent SROS series systems 10.0 release.
tFilterObjects	1.3.6.1.4.1.6527.3.1.2.21
tIPFilterTable	1.3.6.1.4.1.6527.3.1.2.21.1		not-accessible	Contains a List of all ip filters configured on this system.
tIPFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.1.1		not-accessible	Information about a particular IP Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TAN tIPFilterId	1.3.6.1.4.1.6527.3.1.2.21.1.1.1	TAnyFilterID	not-accessible	Uniquely identifies an ip filter. User configured filters can only have values between (1..65535). All other values are reserved for system generated filters.
ROW tIPFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.1.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPFilterTable.
TIT tIPFilterScope	1.3.6.1.4.1.6527.3.1.2.21.1.1.3	TItemScope	read-create	This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
TIT tIPFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.1.1.4	TItemDescription	read-create	User-provided description for this filter.
TFI tIPFilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.1.1.5	TFilterAction	read-create	The action to take for packets that do not match any filter entries. The only allowed values for this field are drop(1) and forward(2).
TEN tIPFilterRadiusInsertPt	1.3.6.1.4.1.6527.3.1.2.21.1.1.6	TEntryIdOrZero	read-create	The value of tIPFilterRadiusInsertPt specifies at what place the filter entries received from Radius will be inserted in the filter. No regular entries, nor Credit Control provided entries can be configured in this range. The value 0 means that no Radius provided filter entries can be inserted in the filter. If tIPFilterRadiusInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterRadiusInsertSize	1.3.6.1.4.1.6527.3.1.2.21.1.1.7	TEntryIdOrZero	read-create	The value of tIPFilterRadiusInsertSize specifies how many filter entries received from Radius for subscriber hosts can be inserted in the filter. If tIPFilterRadiusInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterCreditCntrlInsertPt	1.3.6.1.4.1.6527.3.1.2.21.1.1.8	TEntryIdOrZero	read-create	The value of tIPFilterCreditCntrlInsertPt specifies at what place the filter entries received from Credit Control for a particular subscriber host will be inserted in the filter. No regular entries, nor Radius provided entries can be configured in this range. The value 0 means that no Credit Control provided filter entries can be inserted in the filter. If tIPFilterCreditCntrlInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterCreditCntrlInsertSize	1.3.6.1.4.1.6527.3.1.2.21.1.1.9	TEntryIdOrZero	read-create	The value of tIPFilterCreditCntrlInsertSize specifies how many filter entries received from Credit Control can be inserted in the filter. If tIPFilterCreditCntrlInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
I32 tIPFilterSubInsertHighWmark	1.3.6.1.4.1.6527.3.1.2.21.1.1.10	Integer32	read-create	The value of the object tIPFilterSubInsertHighWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be raised by the agent.
I32 tIPFilterSubInsertLowWmark	1.3.6.1.4.1.6527.3.1.2.21.1.1.11	Integer32	read-create	The value of the object tIPFilterSubInsertLowWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be cleared by the agent.
U32 tIpFilterCreditCntrlNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.1.1.12	Unsigned32	read-only	The value of the object tIpFilterCreditCntrlNbrInsertd indicates how many filter entries are currently inserted in the filter on request the credit control application.
U32 tIpFilterRadiusNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.1.1.13	Unsigned32	read-only	The value of the object tIpFilterRadiusNbrInsertd indicates how many filter entries are currently inserted in the filter on request the RADIUS application.
TLN tIpFilterName	1.3.6.1.4.1.6527.3.1.2.21.1.1.14	TLNamedItemOrEmpty	read-create	The value of tIpFilterName specifies the name to associate with this filter.
tIPFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.2		not-accessible	A table of all IP filter match entries for all IP filters.
tIPFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.2.1		not-accessible	Information about a particular IP Filter entry. Every IP Filter can have zero or more IP Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tIPFilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.2.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every ip filter can have multiple entries, therefore every ip filter entry is identified by the tIPFilterId and tIPFilterParamsIndex.
ROW tIPFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.2.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPFilterParamsTable.
TFI tIPFilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.2.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
TIT tIPFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.2.1.4	TItemDescription	read-create	User-provided description for this filter entry.
TFI tIPFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.2.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter.
IP tIPFilterParamsForwardNH	1.3.6.1.4.1.6527.3.1.2.21.2.1.6	IpAddress	read-create	The ip-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
T/F tIPFilterParamsForwardNHIndirect	1.3.6.1.4.1.6527.3.1.2.21.2.1.7	TruthValue	read-create	tIPFilterParamsForwardNHIndirect specifies if the nexthop is directly/ indirectly reachable.
TDS tIPFilterParamsRemarkDSCP	1.3.6.1.4.1.6527.3.1.2.21.2.1.8	TDSCPFilterActionValue	read-create	The DSCP value that should be remarked in case a packet hits this filter entry.
TDS tIPFilterParamsRemarkDSCPMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.9	TDSCPFilterActionValue	read-create	tIPFilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value.
DOT tIPFilterParamsRemarkDot1p	1.3.6.1.4.1.6527.3.1.2.21.2.1.10	Dot1PPriority	read-create	tIPFilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry.
IP tIPFilterParamsSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.2.1.11	IpAddress	read-create	IP address to match the source-ip of the packet.
ADR tIPFilterParamsSourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.12	IpAddressPrefixLength	read-create	If different from 0, the object tIPFilterParamsSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is 0, and the value of tIPFilterParamsSrcIpFullMask is non zero then the value of tIPFilterParamsSrcIpFullMask is used as mask. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, not matching is done on the source Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsSrcIpFullMask will be set to reflect this same mask.
IP tIPFilterParamsDestinationIpAddr	1.3.6.1.4.1.6527.3.1.2.21.2.1.13	IpAddress	read-create	IP address to match the destination-ip of the packet.
ADR tIPFilterParamsDestinationIpMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.14	IpAddressPrefixLength	read-create	If different from 0, the object tIPFilterParamsDestinationIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is 0, and the value of tIPFilterParamsDestIpFullMask is non zero then the value of tIPFilterParamsDestIpFullMask is used as mask. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, not matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsDestIpFullMask will be set to reflect this same mask.
TIP tIPFilterParamsProtocol	1.3.6.1.4.1.6527.3.1.2.21.2.1.15	TIpProtocol	read-create	IP protocol to match. set to -1 to disable matching IP protocol. If the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tIPFilterParamsTcpSyn and tIPFilterParamsTcpAck will be turned off.
TTC tIPFilterParamsSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.21.2.1.16	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator.
TTC tIPFilterParamsSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.21.2.1.17	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator.
TTC tIPFilterParamsSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.21.2.1.18	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tIPFilterParamsDestPortValue1	1.3.6.1.4.1.6527.3.1.2.21.2.1.19	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsDestPortOperator.
TTC tIPFilterParamsDestPortValue2	1.3.6.1.4.1.6527.3.1.2.21.2.1.20	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsDestPortOperator.
TTC tIPFilterParamsDestPortOperator	1.3.6.1.4.1.6527.3.1.2.21.2.1.21	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsDestPortOperator is used as described in TTcpUdpPortOperator.
TDS tIPFilterParamsDSCP	1.3.6.1.4.1.6527.3.1.2.21.2.1.22	TDSCPNameOrEmpty	read-create	DSCP to be matched on the packet.
TIT tIPFilterParamsFragment	1.3.6.1.4.1.6527.3.1.2.21.2.1.24	TItemMatch	read-create	If enabled, this object matches fragmented/unfragmented packets as per the value of the object.
TIT tIPFilterParamsOptionPresent	1.3.6.1.4.1.6527.3.1.2.21.2.1.25	TItemMatch	read-create	If enabled, this object matches packets if they have options present or not as per the value of the object.
TIP tIPFilterParamsIpOptionValue	1.3.6.1.4.1.6527.3.1.2.21.2.1.26	TIpOption	read-create	The value of the specific ip-option to match.
TIP tIPFilterParamsIpOptionMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.27	TIpOption	read-create	Mask is ANDed with the ip-option before being compared to tIPFilterParamsIpOptionValue.
TIT tIPFilterParamsMultipleOption	1.3.6.1.4.1.6527.3.1.2.21.2.1.28	TItemMatch	read-create	If enabled, matches multiple options as per the value of the object.
TIT tIPFilterParamsTcpSyn	1.3.6.1.4.1.6527.3.1.2.21.2.1.29	TItemMatch	read-create	If Enabled, matches a TCP Syn as per value of the object.
TIT tIPFilterParamsTcpAck	1.3.6.1.4.1.6527.3.1.2.21.2.1.30	TItemMatch	read-create	If Enabled, matches a TCP Ack as per value of the object.
INT tIPFilterParamsIcmpCode	1.3.6.1.4.1.6527.3.1.2.21.2.1.31	INTEGER	read-create	Icmp code to be matched. tIPFilterParamsIcmpCode complements the object tIPFilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
INT tIPFilterParamsIcmpType	1.3.6.1.4.1.6527.3.1.2.21.2.1.32	INTEGER	read-create	Icmp type to be matched. tIPFilterParamsIcmpType complements the object tIPFilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled.
T/F tIPFilterParamsCflowdSample	1.3.6.1.4.1.6527.3.1.2.21.2.1.33	TruthValue	read-create	When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPFilterParamsCflowdIfSample	1.3.6.1.4.1.6527.3.1.2.21.2.1.34	TruthValue	read-create	When tIPFilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
STR tIPFilterParamsForwardNHInterface	1.3.6.1.4.1.6527.3.1.2.21.2.1.35	DisplayString	read-create	The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
C64 tIPFilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.36	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tIPFilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.37	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
T/F tIPFilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.2.1.38	TruthValue	read-only	tIPFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
TNA tIPFilterParamsForwardRedPlcy	1.3.6.1.4.1.6527.3.1.2.21.2.1.39	TNamedItemOrEmpty	read-create	tIPFilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop.
IP tIPFilterParamsActiveDest	1.3.6.1.4.1.6527.3.1.2.21.2.1.40	IpAddress	read-only	tIPFilterParamsActiveDest indicates the IP address of the active destination for this IP filter. A value of 0 indicates that there is currently no active destination.
TMN tIPFilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.2.1.41	TmnxServId	read-only	tIPFilterParamsFwdSvcId indicates the service id of the destination for this IP filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination.
TMN tIPFilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.2.1.42	TmnxPortID	read-create	tIPFilterParamsFwdSapPortId specifies the sap port identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value.
TMN tIPFilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.2.1.43	TmnxEncapVal	read-create	tIPFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this IP filter entry. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
SDP tIPFilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.2.1.44	SdpBindId	read-create	tIPFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSapEncapVal have a zero value.
TNA tIPFilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.2.1.45	TNamedItemOrEmpty	read-create	tIPFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TTI tIPFilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.2.1.46	TTimeRangeState	read-only	tIPFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
STR tIPFilterParamsRedirectURL	1.3.6.1.4.1.6527.3.1.2.21.2.1.47	DisplayString	read-create	The value of tIPFilterParamsRedirectURL specifies the URL to redirect to, when the value of tIPFilterParamsAction is 'httpRedirect'. Note that the value of tIPFilterParamsRedirectURL is silently cleared by the system if tIPFilterParamsAction is set to any value other than httpRedirect.
IP tIPFilterParamsSrcIpFullMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.48	IpAddress	read-create	If different from 0, the object tIPFilterParamsSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, no matching is done on the Source Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsSrcIpFullMask then the value of tIPFilterParamsSourceIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsSourceIpMask will be set to 0.
IP tIPFilterParamsDestIpFullMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.49	IpAddress	read-create	If different from 0, the object tIPFilterParamsDestIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, no matching is done on the Destination Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsDestIpFullMask then the value of tIPFilterParamsDestinationIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsDestinationIpMask will be set to 0.
C64 tIPFilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.50	Counter64	read-only	The value of tIPFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
C64 tIPFilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.51	Counter64	read-only	The value of tIPFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
TMN tIPFilterParamsFwdRtrId	1.3.6.1.4.1.6527.3.1.2.21.2.1.52	TmnxVRtrIDOrZero	read-create	tIPFilterParamsFwdRtrId specifies, if different from '0', the router id of the into which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
TIT tIPFilterParamsSrcRouteOption	1.3.6.1.4.1.6527.3.1.2.21.2.1.53	TItemMatch	read-create	tIPFilterParamsSrcRouteOption specifies, when enabled, that this filter should match if a (strict or loose) source route option is present/not present at any location within the IP header, as per the value of this object.
TNA tIPFilterParamsSrcIpPrefixList	1.3.6.1.4.1.6527.3.1.2.21.2.1.54	TNamedItemOrEmpty	read-create	The value of the object tIPFilterParamsSrcIpPrefixList specifies the ip-prefix-list to be used as match criterion for the source ip address. If the value of this object is empty then the values of the objects tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask will be used as src-ip match criterion. The value specified for this object must correspond to a prefix-list defined in tFilterPrefixListTable. When set to a non zero value, the value of the objects tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask will set to their default values. The value of this object will be set to its default value by the system if a new (non default) value is provided for any of the objects tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask. An attempt to set tIPFilterParamsSrcIpPrefixList to a non-default value in combination with setting any of tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask to (a) non-default value(s) is rejected by the system. Also, setting both tIPFilterParamsSrcIpPrefixList and tIPFilterParamsDstIpPrefixList to non-default values is rejected by the system
TNA tIPFilterParamsDstIpPrefixList	1.3.6.1.4.1.6527.3.1.2.21.2.1.55	TNamedItemOrEmpty	read-create	The value of the object tIPFilterParamsDstIpPrefixList specifies the ip-prefix-list to be used as match criterion for the destination ip address. If the value of this object is empty the values of the objects tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask will be used as src-ip match criterion. The value specified for this object must correspond to a prefix-list defined in tFilterPrefixListTable. When set to a non zero value, the value of the objects tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask will set to their default values. The value of this object will be set to its default value by the system if a new (non default) value is provided for any of the objects tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask. An attempt to set tIPFilterParamsDstIpPrefixList to a non-default value in combination with setting any of tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask to (a) non-default value(s) is rejected by the system. Also, setting both tIPFilterParamsDstIpPrefixList and tIPFilterParamsSrcIpPrefixList to non-default values is rejected by the system
tMacFilterTable	1.3.6.1.4.1.6527.3.1.2.21.3		not-accessible	Contains a List of all mac filters configured on this system.
tMacFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.3.1		not-accessible	Information about a particular MAC Filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TMA tMacFilterId	1.3.6.1.4.1.6527.3.1.2.21.3.1.1	TMACFilterID	not-accessible	Uniquely identifies a mac filter as configures on this system.
ROW tMacFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.3.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tMacFilterTable.
TIT tMacFilterScope	1.3.6.1.4.1.6527.3.1.2.21.3.1.3	TItemScope	read-create	This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
TIT tMacFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.3.1.4	TItemDescription	read-create	User-provided description for this filter.
TFI tMacFilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.3.1.5	TFilterAction	read-create	The action to take for packets that do not match any filter entries. The only allowed values for this field are drop(1) and forward(2).
TMA tMacFilterType	1.3.6.1.4.1.6527.3.1.2.21.3.1.6	TMacFilterType	read-create	tMacFilterType specifies which type of entries this mac filter can contain. If tMacFilterType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type isid(2) and vid(3). if tMacFilterType is set to 'isid(2)' the only accepted match criteria for the filter entries are: - tMacFilterParamsLowISID - tMacFilterParamsHighISID If tMacFilterType is set to vid(3) the only accepted match criteria for the filter entries are: - tMacFilterParamsInnerTagValue - tMacFilterParamsInnerTagMask - tMacFilterParamsOuterTagValue - tMacFilterParamsOuterTagMask tMacFilterType can only be changed if the filter is not applied and has no entries.
TLN tMacFilterName	1.3.6.1.4.1.6527.3.1.2.21.3.1.7	TLNamedItemOrEmpty	read-create	The value of tMacFilterName specifies the name to associate with this filter.
tMacFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.4		not-accessible	A table of all MAC filter match entries for all MAC filters.
tMacFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.4.1		not-accessible	Information about a particular MAC Filter entry. Every MAC Filter can have zero or more MAC Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tMacFilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.4.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every mac filter can have multiple entries, therefore every mac filter entry is identified by the tMacFilterId and tMacFilterParamsIndex.
ROW tMacFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.4.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tMacFilterParamsTable.
TFI tMacFilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.4.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
TIT tMacFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.4.1.4	TItemDescription	read-create	User-provided description for this filter entry.
TFI tMacFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.4.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. The value nat(5) is not allowed.
TFR tMacFilterParamsFrameType	1.3.6.1.4.1.6527.3.1.2.21.4.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria. For filter entries in a Mac filter of type tMacFilterType = dot1q or tMacFilterType qinq the default value for this object is set to ethernetII (3), and no changes are allowed. In all other cases the default value is set to e802dot3 (0)
MAC tMacFilterParamsSrcMAC	1.3.6.1.4.1.6527.3.1.2.21.4.1.8	MacAddress	read-create	Source MAC to match for this policy MAC filter entry.
MAC tMacFilterParamsSrcMACMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.9	MacAddress	read-create	Source MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria.
MAC tMacFilterParamsDstMAC	1.3.6.1.4.1.6527.3.1.2.21.4.1.10	MacAddress	read-create	Destination MAC mask value for this policy MAC filter entry.
MAC tMacFilterParamsDstMACMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.11	MacAddress	read-create	Destination MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria.
DOT tMacFilterParamsDot1pValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.12	Dot1PPriority	read-create	IEEE 802.1p priority value for this policy MAC filter entry. Use -1 to disable matching this filter criteria.
DOT tMacFilterParamsDot1pMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.13	Dot1PPriority	read-create	IEEE 802.1p priority mask value for this policy MAC filter entry. Use zero to disable matching, use 7 to match everything.
INT tMacFilterParamsEtherType	1.3.6.1.4.1.6527.3.1.2.21.4.1.14	INTEGER	read-create	Ethertype for this policy MAC filter entry. Use -1 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to Ethernet_II.
NUM tMacFilterParamsDsap	1.3.6.1.4.1.6527.3.1.2.21.4.1.15	ServiceAccessPoint	read-create	MAC DSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified together to the default value.
NUM tMacFilterParamsDsapMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.16	ServiceAccessPoint	read-create	MAC DSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified together to the default value.
NUM tMacFilterParamsSsap	1.3.6.1.4.1.6527.3.1.2.21.4.1.17	ServiceAccessPoint	read-create	MAC SSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified together to the default value.
NUM tMacFilterParamsSsapMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.18	ServiceAccessPoint	read-create	MAC SSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified together to the default value.
INT tMacFilterParamsSnapPid	1.3.6.1.4.1.6527.3.1.2.21.4.1.19	INTEGER	read-create	MAC SNAP PID to match for this policy MAC filter entry. use -1 to disable matching by this criteria. This object has no significance if object tMacFilterParamsFrameType is not set to 802dot2SNAP.
INT tMacFilterParamsSnapOui	1.3.6.1.4.1.6527.3.1.2.21.4.1.20	INTEGER	read-create	MAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what to match. Matching can be disabled by the use of the value off(1). This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2SNAP.
C64 tMacFilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.21	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tMacFilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.22	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
T/F tMacFilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.4.1.23	TruthValue	read-only	tMacFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
TMN tMacFilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.4.1.24	TmnxServId	read-only	tMacFilterParamsFwdSvcId indicates the service id of the destination for this Mac filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination.
TMN tMacFilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.4.1.25	TmnxPortID	read-create	tMacFilterParamsFwdSapPortId specifies the sap port identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value.
TMN tMacFilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.4.1.26	TmnxEncapVal	read-create	tMacFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this Mac filter entry. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, the tMacFilterParamsFwdSapPortId object has a non zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
SDP tMacFilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.4.1.27	SdpBindId	read-create	tMacFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSapEncapVal have a zero value.
TNA tMacFilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.4.1.28	TNamedItemOrEmpty	read-create	tMacFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TTI tMacFilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.4.1.29	TTimeRangeState	read-only	tMacFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tMacFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tMacFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tMacFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
STR tMacFilterParamsRedirectURL	1.3.6.1.4.1.6527.3.1.2.21.4.1.30	DisplayString	read-create	The value of tMacFilterParamsRedirectURL specifies the URL to redirect to, when the value of tMacFilterParamsAction is 'httpRedirect'.
C64 tMacFilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.31	Counter64	read-only	The value of tMacFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
C64 tMacFilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.32	Counter64	read-only	The value of tMacFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
SVC tMacFilterParamsLowISID	1.3.6.1.4.1.6527.3.1.2.21.4.1.33	SvcISID	read-create	The value of tMacFilterParamsLowISID specifies the lowest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The default value of -1 indicates no ISID matching will be performed. The value of this field can be equal to but not lower than the value of the tMacFilterParamsHighISID field. Changing the value of this field might also change the value of tMacFilterParamsHighISID: A value of -1 will change the value of tMacFilterParamsHighISID to -1. Changing the value of this field from -1 to any other value will change the value of tMacFilterParamsHighISID to this same value. Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only be set if tMacFilterType is set to 'isid(1)'.
SVC tMacFilterParamsHighISID	1.3.6.1.4.1.6527.3.1.2.21.4.1.34	SvcISID	read-create	The value of tMacFilterParamsHighISID specifies the highest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The default value of -1 indicates no ISID matching will be performed. The value of this field can be equal to but not higher than the value of the tMacFilterParamsLowISID field. Changing the value of this field might also change the value of tMacFilterParamsLowISID: A value of -1 will change the value of tMacFilterParamsLowISID to -1. Changing the value of this field from -1 to any other value will change the value of tMacFilterParamsLowISID to this same value. Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only be set if tMacFilterType is set to 'isid(1)'.
QTA tMacFilterParamsInnerTagValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.35	QTagFullRangeOrNone	read-create	The value of tMacFilterParamsInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'. The (default) value of '-1' indicates no inner VLAN tag matching will be performed.
QTA tMacFilterParamsInnerTagMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.36	QTagFullRange	read-create	The value of tMacFilterParamsInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tMacFilterParamsInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'.
QTA tMacFilterParamsOuterTagValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.37	QTagFullRangeOrNone	read-create	The value of tMacFilterParamsOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
QTA tMacFilterParamsOuterTagMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.38	QTagFullRange	read-create	The value of tMacFilterParamsOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tMacFilterParamsOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'.
tFilterLogTable	1.3.6.1.4.1.6527.3.1.2.21.5		not-accessible	A table of all filter logs.
tFilterLogEntry	1.3.6.1.4.1.6527.3.1.2.21.5.1		not-accessible	Information about a particular Filter Log entry.
TFI tFilterLogId	1.3.6.1.4.1.6527.3.1.2.21.5.1.1	TFilterLogId	not-accessible	This is the index for the entry. An entry cannot be created with an id of 0.
ROW tFilterLogRowStatus	1.3.6.1.4.1.6527.3.1.2.21.5.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tFilterLogTable.
TFI tFilterLogDestination	1.3.6.1.4.1.6527.3.1.2.21.5.1.3	TFilterLogDestination	read-create	This object specifies the destination of the log.
TIT tFilterLogDescription	1.3.6.1.4.1.6527.3.1.2.21.5.1.4	TItemDescription	read-create	User-provided description for this filter log entry.
U32 tFilterLogMaxNumEntries	1.3.6.1.4.1.6527.3.1.2.21.5.1.5	Unsigned32	read-create	The object tFilterLogMaxNumEntries specifies the maximum number of entries that the log can store. If tFilterLogDestination is not 'memory(1)' then the object tFilterLogMaxNumEntries maintains a value of '0', and Any change attempts will be silently discarded.
U32 tFilterLogSysLogId	1.3.6.1.4.1.6527.3.1.2.21.5.1.6	Unsigned32	read-create	The object tFilterLogSysLogId specifies the syslog Id to be used as destination. If tFilterLogDestination is not 'sysLog(2)' then the object tFilterLogSysLogId maintains a value of '0', and any change attempts will be silently discarded.
U32 tFilterLogFileId	1.3.6.1.4.1.6527.3.1.2.21.5.1.7	Unsigned32	read-create	The object tFilterLogFileId specifies the File Id to be used as destination. If tFilterLogDestination is not 'file(3)' then the object tFilterLogFileId Imaintains a value of '0', and any change attempts will be silently discarded.
T/F tFilterLogStopOnFull	1.3.6.1.4.1.6527.3.1.2.21.5.1.8	TruthValue	read-create
T/F tFilterLogEnabled	1.3.6.1.4.1.6527.3.1.2.21.5.1.9	TruthValue	read-create
T/F tFilterLogSummaryEnabled	1.3.6.1.4.1.6527.3.1.2.21.5.1.10	TruthValue	read-create	The value of tFilterLogSummaryEnabled specifies whether or not summarization of filter log entries is performed. Summarization is only allowed in case tFilterLogDestination is set to syslog.
TFI tFilterLogSummaryCrit1	1.3.6.1.4.1.6527.3.1.2.21.5.1.11	TFilterLogSummaryCriterium	read-create	The value of tFilterLogSummaryCrit1 specifies how filter log entries will be summarized. This field is only meaningful if the object tFilterLogSummaryEnabled is set to true.
tFilterLogScalars	1.3.6.1.4.1.6527.3.1.2.21.6
G32 tFilterLogMaxInstances	1.3.6.1.4.1.6527.3.1.2.21.6.1	Gauge32	read-only	tFilterLogMaxInstances maintains the maximum allowed instances of filter logs allowed on the system
G32 tFilterLogInstances	1.3.6.1.4.1.6527.3.1.2.21.6.2	Gauge32	read-only	tFilterLogInstances maintains the instances of filter logs presently existing on the system
G32 tFilterLogBindings	1.3.6.1.4.1.6527.3.1.2.21.6.3	Gauge32	read-only	tFilterLogBindings maintains the count of the configured filter log bindings presently existing on the system. The bindings get instantiated when the filter is instantiated
tFilterNotificationObjects	1.3.6.1.4.1.6527.3.1.2.21.8
INT tFilterPBRDropReason	1.3.6.1.4.1.6527.3.1.2.21.8.1	INTEGER	accessible-for-notify	Used by tIPFilterPBRPacketsDrop to report the failure reason code.
NUM tFilterParmRow	1.3.6.1.4.1.6527.3.1.2.21.8.2	RowPointer	accessible-for-notify	The value of the object tFilterParmRow indicates the OID of the row status of the applicable filter parameter table. This can be a row from either one of the following tables: - tIPFilterParamsTable; - tMacFilterParamsTable; or - tIPv6FilterParamsTable
STR tFilterAlarmDescription	1.3.6.1.4.1.6527.3.1.2.21.8.3	DisplayString	accessible-for-notify	The value of the object tFilterAlarmDescription is a printable character string which contains information about the cause of the problem.
TFI tFilterId	1.3.6.1.4.1.6527.3.1.2.21.8.4	TFilterID	accessible-for-notify	The value of the object tFilterId, together with the object tFilterType uniquely defines the filter for which this notification is generated.
TFI tFilterType	1.3.6.1.4.1.6527.3.1.2.21.8.5	TFilterType	accessible-for-notify	The value of the object tFilterType, together with the object tFilterId uniquely defines the filter for which this notification is generated.
TFI tFilterSubInsSpaceOwner	1.3.6.1.4.1.6527.3.1.2.21.8.6	TFilterSubInsSpaceOwner	accessible-for-notify	The value of the object tFilterSubInsSpaceOwner, specifies for which application, capable of inserting filter entries, this notification is generated.
INT tFilterThresholdReached	1.3.6.1.4.1.6527.3.1.2.21.8.7	INTEGER	accessible-for-notify	The value of the object tFilterThresholdReached, specifies the threshold reached at the moment this notificastion was generated.
INT tFltrFlowSpecProblem	1.3.6.1.4.1.6527.3.1.2.21.8.8	INTEGER	accessible-for-notify	The value of the object tFltrFlowSpecProblem, indicates which problem has occured while processing a BGP flowspec NLRI in the filter module.
STR tFltrFlowSpecProblemDescription	1.3.6.1.4.1.6527.3.1.2.21.8.9	DisplayString	accessible-for-notify	The value of the object tFltrFlowSpecProblem may contain a more detailed problem description then as given by tFltrFlowSpecProblem.
OCT tFltrFLowSpecNLRI	1.3.6.1.4.1.6527.3.1.2.21.8.10	OCTET STRING	accessible-for-notify	The value of the object tFltrFLowSpecNLRI contains at most the first 30 octets of the NLRI causing the problem.
U32 tFltrFlowSpecVrtrId	1.3.6.1.4.1.6527.3.1.2.21.8.11	Unsigned32	accessible-for-notify	The value of the object tFltrFlowSpecVrtrId indicates the virtual router Id to which the NLRI belongs.
tFilterTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.21.9
TIM tFilterDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.21.9.1	TimeStamp	read-only	timestamp of last change to tFilterObjects.
tFilterRedirectPolicyTable	1.3.6.1.4.1.6527.3.1.2.21.10		not-accessible	Contains a List of all redirect policies configured on this system.
tFilterRedirectPolicyEntry	1.3.6.1.4.1.6527.3.1.2.21.10.1		not-accessible	Information about a particular redirect policy. Entries are created/deleted by user.
TNA tFilterRedirectPolicy	1.3.6.1.4.1.6527.3.1.2.21.10.1.1	TNamedItem	not-accessible	tFilterRedirectPolicy uniquely identifies each redirect policy configured on this system.
ROW tFilterRPRowStatus	1.3.6.1.4.1.6527.3.1.2.21.10.1.2	RowStatus	read-create	tFilterRPRowStatus allows entries to be created and deleted in the tFilterRedirectPolicyTable.
TIT tFilterRPDescription	1.3.6.1.4.1.6527.3.1.2.21.10.1.3	TItemDescription	read-create	User-provided description for this redirect policy is maintained in the object tFilterRPDescription.
TMN tFilterRPAdminState	1.3.6.1.4.1.6527.3.1.2.21.10.1.4	TmnxAdminState	read-create	tFilterRPAdminState holds the admin state of the policy. If the admin state is 'outOfService', the tests will not be conducted.
IP tFilterRPActiveDest	1.3.6.1.4.1.6527.3.1.2.21.10.1.5	IpAddress	read-only	tFilterRPActiveDest indicates the IP address of the active destination. A value of 0 indicates that there is currently no active destination.
tFilterRedirectDestTable	1.3.6.1.4.1.6527.3.1.2.21.11		not-accessible	Contains a List of all redirect destinations configured on this system.
tFilterRedirectDestEntry	1.3.6.1.4.1.6527.3.1.2.21.11.1		not-accessible	Information about a particular Redirect destination. Entries are created/deleted by user.
IP tFilterRedirectDest	1.3.6.1.4.1.6527.3.1.2.21.11.1.1	IpAddress	not-accessible	tFilterRedirectDest holds the IP address of the destination entry.
ROW tFilterRDRowStatus	1.3.6.1.4.1.6527.3.1.2.21.11.1.2	RowStatus	read-create	tFilterRDRowStatus allows entries to be created and deleted in the tFilterRedirectDestTable.
TIT tFilterRDDescription	1.3.6.1.4.1.6527.3.1.2.21.11.1.3	TItemDescription	read-create	User-provided description for this destination is maintained in the object tFilterRDDescription.
U32 tFilterRDAdminPriority	1.3.6.1.4.1.6527.3.1.2.21.11.1.4	Unsigned32	read-create	tFilterRDAdminPriority holds the configured base priority for the destination.
U32 tFilterRDOperPriority	1.3.6.1.4.1.6527.3.1.2.21.11.1.5	Unsigned32	read-only	tFilterRDAdminPriority maintains the operational value of the priority for this destination. The highest operational priority across multiple destinations is used as the preferred destination. A value of '0' is maintained if the destination if tFilterRDOperState is 'outOfService'.
TMN tFilterRDAdminState	1.3.6.1.4.1.6527.3.1.2.21.11.1.6	TmnxAdminState	read-create	tFilterRDAdminState maintains the configured state of the destination. If the admin state is 'outOfService', the tests for this destination will not be conducted.
TMN tFilterRDOperState	1.3.6.1.4.1.6527.3.1.2.21.11.1.7	TmnxOperState	read-only	The value of tFilterRDOperState indicates the operational state of the destination.
tFilterRedirectSNMPTestTable	1.3.6.1.4.1.6527.3.1.2.21.12		not-accessible	Contains a List of all redirect SNMP tests configured on this system.
tFilterRedirectSNMPTestEntry	1.3.6.1.4.1.6527.3.1.2.21.12.1		not-accessible	Information about a specific SNMP test configured for a destination. Entries are created/deleted by user.
TNA tFilterRedirectSNMPTest	1.3.6.1.4.1.6527.3.1.2.21.12.1.1	TNamedItem	not-accessible	tFilterRedirectSNMPTest specifies the name of the SNMP test.
ROW tFilterRSTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.12.1.2	RowStatus	read-create	tFilterRSTRowStatus allows tests to be created and deleted in the tFilterRedirectSNMPTestTable.
OID tFilterRSTOID	1.3.6.1.4.1.6527.3.1.2.21.12.1.3	OBJECT IDENTIFIER	read-create	tFilterRSTOID stores the OID of the object to be fetched from the destination. The value of this object can only be changed if the object tFilterRSTCommunity is changed at the same time.
STR tFilterRSTCommunity	1.3.6.1.4.1.6527.3.1.2.21.12.1.4	DisplayString	read-create	The value of tFilterRSTCommunity is the SNMPv1 or SNMPv2c Community String or the SNMPv3 Context Name used to conduct this SNMP test as described in RFC2571 and RFC2737. When the value of tFilterRSTSNMPVersion is 'snmpv1' or 'snmpv2c' this object represents a community string. When the value of tFilterRSTSNMPVersion is 'snmpv3' this object represents a SNMPv3 context name. The value of this object can only be changed if the object tFilterRSTOID is changed at the same time.
INT tFilterRSTSNMPVersion	1.3.6.1.4.1.6527.3.1.2.21.12.1.5	INTEGER	read-create	tFilterRSTSNMPVersion specifies the SNMP PDU format to be used while conducting the test.
U32 tFilterRSTInterval	1.3.6.1.4.1.6527.3.1.2.21.12.1.6	Unsigned32	read-create	The value of tFilterRSTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
U32 tFilterRSTTimeout	1.3.6.1.4.1.6527.3.1.2.21.12.1.7	Unsigned32	read-create	The value of tFilterRSTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
U32 tFilterRSTDropCount	1.3.6.1.4.1.6527.3.1.2.21.12.1.8	Unsigned32	read-create	The value of tFilterRSTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRSTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.12.1.9	Unsigned32	read-create	The value of tFilterRSTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRSTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.12.1.10	Unsigned32	read-only	The value of tFilterRSTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
TIM tFilterRSTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.12.1.11	TimeStamp	read-only	tFilterRSTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
OID tFilterRSTLastOID	1.3.6.1.4.1.6527.3.1.2.21.12.1.12	OBJECT IDENTIFIER	read-only	The object tFilterRSTLastOID holds the OID received in the response.
INT tFilterRSTLastType	1.3.6.1.4.1.6527.3.1.2.21.12.1.13	INTEGER	read-only	tFilterRSTLastType maintains the type of the value received. A value of none(0) indicated that no value has been received
C32 tFilterRSTLastCounter32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.14	Counter32	read-only	The value tFilterRSTLastType is 'counter32'.
U32 tFilterRSTLastUnsigned32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.15	Unsigned32	read-only	The value tFilterRSTLastType is 'unsigned32'.
TIK tFilterRSTLastTimeTicksVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.16	TimeTicks	read-only	The value tFilterRSTLastType is 'timeTicks'.
I32 tFilterRSTLastInt32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.17	Integer32	read-only	The value tFilterRSTLastType is 'integer32'.
OCT tFilterRSTLastOctetStringVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.18	OCTET STRING	read-only	The value tFilterRSTLastType is 'octetString'.
IP tFilterRSTLastIpAddressVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.19	IpAddress	read-only	The value tFilterRSTLastType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTLastOctetStringVal column.
OID tFilterRSTLastOidVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.20	OBJECT IDENTIFIER	read-only	The value tFilterRSTLastType is 'objectId'.
C64 tFilterRSTLastCounter64Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.21	Counter64	read-only	The value tFilterRSTLastType is 'counter64'.
OPA tFilterRSTLastOpaqueVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.22	Opaque	read-only	The value tFilterRSTLastType is 'opaque'.
INT tFilterRSTLastAction	1.3.6.1.4.1.6527.3.1.2.21.12.1.23	INTEGER	read-only	tFilterRSTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRSTHoldDown seconds.
I32 tFilterRSTLastPrioChange	1.3.6.1.4.1.6527.3.1.2.21.12.1.24	Integer32	read-only	If the last action on the operational state of the destination i.e. tFilterRSTLastAction is 'enable', tFilterRSTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'.
I32 tFilterRSTNextRespIndex	1.3.6.1.4.1.6527.3.1.2.21.12.1.25	Integer32	read-only	The value of tFilterRSTNextRespIndex indicates the next response index to be used while creating a row in the tFilterRedirectSNMPRespTable. The value of '-1' means that the maximum number of return values for this OID are already configured.
tFilterRedirectSNMPRespTable	1.3.6.1.4.1.6527.3.1.2.21.13		not-accessible	Each row in this table holds the effect of the test on the destination for a specific return value. Each row is created once and cannot be modified after creation. Any change attempts will be silently discarded.
tFilterRedirectSNMPRespEntry	1.3.6.1.4.1.6527.3.1.2.21.13.1		not-accessible	Information about action to be taken for a specific destination when a specific response is received. Each row is created once and cannot be modified after creation. Any change attempts will be silently discarded.
I32 tFilterRSTRespId	1.3.6.1.4.1.6527.3.1.2.21.13.1.1	Integer32	not-accessible	tFilterRSTRespId holds the response value received from the destination.
ROW tFilterRSTRespRowStatus	1.3.6.1.4.1.6527.3.1.2.21.13.1.2	RowStatus	read-create	This object allows response strings to be specified for a specific test and the change it will cause to the priority of the destination.
INT tFilterRSTRespAction	1.3.6.1.4.1.6527.3.1.2.21.13.1.3	INTEGER	read-create	tFilterRSTRespAction specifies the type of change that should be made to the destination priority tFilterRDOperPriority, if the return value is same as tFilterRSTRespId. If tFilterRSTRespPrioChange is 0 this field will be set to 'disable'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTRespPrioChange	1.3.6.1.4.1.6527.3.1.2.21.13.1.4	Unsigned32	read-create	tFilterRSTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRSTRespAction is either 'increase' or 'decrease'. If tFilterRSTRespAction is 'disable', this field will be set to 0. This field cannot be modified after creation. Any change attempts will be silently discarded.
OID tFilterRSTRespOID	1.3.6.1.4.1.6527.3.1.2.21.13.1.5	OBJECT IDENTIFIER	read-create	The object tFilterRSTRespOID holds the OID to be received in the response. This field cannot be modified after creation. Any change attempts will be silently discarded.
INT tFilterRSTRespType	1.3.6.1.4.1.6527.3.1.2.21.13.1.6	INTEGER	read-create	tFilterRSTRespType maintains the type of the value to be received. Note: types 'objectId' and 'counter64' are not supported for now, and will be rejected when used. This field cannot be modified after creation. Any change attempts will be silently discarded.
C32 tFilterRSTCounter32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.7	Counter32	read-create	The value tFilterRSTRespType is 'counter32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTUnsigned32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.8	Unsigned32	read-create	The value tFilterRSTRespType is 'unsigned32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
TIK tFilterRSTTimeTicksVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.9	TimeTicks	read-create	The value tFilterRSTRespType is 'timeTicks'. This field cannot be modified after creation. Any change attempts will be silently discarded.
I32 tFilterRSTInt32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.10	Integer32	read-create	The value tFilterRSTRespType is 'integer32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
OCT tFilterRSTOctetStringVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.11	OCTET STRING	read-create	The value tFilterRSTRespType is 'octetString'. This field cannot be modified after creation. Any change attempts will be silently discarded.
IP tFilterRSTIpAddressVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.12	IpAddress	read-create	The value tFilterRSTRespType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTOctetStringVal column. This field cannot be modified after creation. Any change attempts will be silently discarded.
OID tFilterRSTOidVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.13	OBJECT IDENTIFIER	read-create	The response value if tFilterRSTRespType is set to 'objectId'. This field cannot be modified after creation. Any change attempts will be silently discarded.
C64 tFilterRSTCounter64Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.14	Counter64	read-create	The response value if tFilterRSTRespType is set to 'counter64'. This field cannot be modified after creation. Any change attempts will be silently discarded.
OPA tFilterRSTOpaqueVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.15	Opaque	read-create	The value tFilterRSTRespType is 'opaque'. This field cannot be modified after creation. Any change attempts will be silently discarded.
tFilterRedirectURLTestTable	1.3.6.1.4.1.6527.3.1.2.21.14		not-accessible	Contains a List of all redirect snmp tests configured on this system.
tFilterRedirectURLTestEntry	1.3.6.1.4.1.6527.3.1.2.21.14.1		not-accessible	Information about a specific URL test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TNA tFilterRedirectURLTest	1.3.6.1.4.1.6527.3.1.2.21.14.1.1	TNamedItem	not-accessible	tFilterRedirectURLTest holds the name of the URL test.
ROW tFilterRUTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.14.1.2	RowStatus	read-create	tFilterRUTRowStatus allows tests to be created and deleted in the tFilterRedirectURLTestTable.
STR tFilterRUTURL	1.3.6.1.4.1.6527.3.1.2.21.14.1.3	DisplayString	read-create	This object holds the URL to be probed.
STR tFilterRUTHTTPVersion	1.3.6.1.4.1.6527.3.1.2.21.14.1.4	DisplayString	read-create	The HTTP Version to be used while performing the URL test. The system by default uses HTTP Version 1.1 until explicitly specified.
U32 tFilterRUTInterval	1.3.6.1.4.1.6527.3.1.2.21.14.1.5	Unsigned32	read-create	The value of tFilterRUTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
U32 tFilterRUTTimeout	1.3.6.1.4.1.6527.3.1.2.21.14.1.6	Unsigned32	read-create	The value of tFilterRUTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
U32 tFilterRUTDropCount	1.3.6.1.4.1.6527.3.1.2.21.14.1.7	Unsigned32	read-create	The value of tFilterRUTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRUTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.14.1.8	Unsigned32	read-create	The value of tFilterRUTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRUTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.14.1.9	Unsigned32	read-only	The value of tFilterRUTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
TIM tFilterRUTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.14.1.10	TimeStamp	read-only	tFilterRUTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
U32 tFilterRUTLastRetCode	1.3.6.1.4.1.6527.3.1.2.21.14.1.11	Unsigned32	read-only	tFilterRUTLastRetCode holds the return code received in the last response.
INT tFilterRUTLastAction	1.3.6.1.4.1.6527.3.1.2.21.14.1.12	INTEGER	read-only	tFilterRUTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRUTHoldDown seconds.
I32 tFilterRUTLastPrioChange	1.3.6.1.4.1.6527.3.1.2.21.14.1.13	Integer32	read-only	If the last action on the operational state of the destination i.e. tFilterRUTLastAction is 'enable', tFilterRUTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'.
tFilterRedirectURLRespTable	1.3.6.1.4.1.6527.3.1.2.21.15		not-accessible	Each row in this table holds the effect of the test on the destination for a range of return values.
tFilterRedirectURLRespEntry	1.3.6.1.4.1.6527.3.1.2.21.15.1		not-accessible	Information about action to be taken for a specific destination when a return value within the range specified between tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode is received.
U32 tFilterRedirectURLLowRespCode	1.3.6.1.4.1.6527.3.1.2.21.15.1.1	Unsigned32	not-accessible	tFilterRedirectURLLowRespCode specifies the lower return code of the range specified by this entry.
U32 tFilterRedirectURLHighRespCode	1.3.6.1.4.1.6527.3.1.2.21.15.1.2	Unsigned32	not-accessible	tFilterRedirectURLHighRespCode specifies the higher return code of the range specified by this entry.
ROW tFilterRUTRespRowStatus	1.3.6.1.4.1.6527.3.1.2.21.15.1.3	RowStatus	read-create	tFilterRUTRespRowStatus allows the mapping of a range of return codes returned from a specific test to the change it will cause to the priority of the destination.
INT tFilterRUTRespAction	1.3.6.1.4.1.6527.3.1.2.21.15.1.4	INTEGER	read-create	If the tFilterRUTRespAction is either 'increase(1)' or 'decrease(2)' tFilterRUTRespPrioChange specifies the offset to be applied to the destination base priority (tFilterRDAdminPriority) in order to compute the tFilterRDOperPriority as a result of this test. If the tFilterRUTRespAction is set to 'disable(3)', on the reception of the specified response, the destination will be deemed unusable and the tFilterRDOperPriority will be set to '0'. The value of tFilterRUTRespAction will be forced by the system to the value 'disable(3)' if the tFilterRUTRespPrioChange has the value '0'. Any change attempts will be silently discarded in this case.
U32 tFilterRUTRespPrioChange	1.3.6.1.4.1.6527.3.1.2.21.15.1.5	Unsigned32	read-create	tFilterRUTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRUTRespAction is either 'increase' or 'decrease'. If tFilterRUTRespAction is 'disable', tFilterRUTRespPrioChange will be forced to 0. Any change to tFilterRUTRespPrioChange will be silently discarded in this case. Setting the object tFilterRUTRespPrioChange to 0 will cause the value of tFilterRUTRespAction to be set to 'disable'.
tFilterRedirectPingTestTable	1.3.6.1.4.1.6527.3.1.2.21.16		not-accessible	Contains a List of all redirect Ping tests configured on this system.
tFilterRedirectPingTestEntry	1.3.6.1.4.1.6527.3.1.2.21.16.1		not-accessible	Information about a specific Ping test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
ROW tFilterRPTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.16.1.1	RowStatus	read-create	This object allows tests to be created and deleted in the tFilterRedirectPingTestTable.
U32 tFilterRPTInterval	1.3.6.1.4.1.6527.3.1.2.21.16.1.2	Unsigned32	read-create	The value of tFilterRPTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
U32 tFilterRPTTimeout	1.3.6.1.4.1.6527.3.1.2.21.16.1.3	Unsigned32	read-create	The value of tFilterRPTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
U32 tFilterRPTDropCount	1.3.6.1.4.1.6527.3.1.2.21.16.1.4	Unsigned32	read-create	The value of tFilterRPTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRPTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.16.1.5	Unsigned32	read-create	The value of tFilterRPTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRPTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.16.1.6	Unsigned32	read-only	The value of tFilterRPTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
TIM tFilterRPTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.16.1.7	TimeStamp	read-only	tFilterRPTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
INT tFilterRPTLastAction	1.3.6.1.4.1.6527.3.1.2.21.16.1.8	INTEGER	read-only	tFilterRPTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRPTHoldDown seconds.
tAutoIPFilterEntryTable	1.3.6.1.4.1.6527.3.1.2.21.17		not-accessible	Defines the Alcatel-Lucent SROS series automatic IP filters for providing, via SNMP, the capability of gathering information regarding the same. tAutoIPFilterEntryTable holds a list of all automatic filter entries being used for filtering. This table is obsoleted in release 3.0.
tAutoIPFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.17.1		not-accessible	Defines an entry in the tAutoIPFilterEntryTable. Entries are created and deleted in this table by the system. Each entry provides information about a single active automatic filter entry. This entry is obsoleted in release 3.0.
TFI tAutoIPFilterId	1.3.6.1.4.1.6527.3.1.2.21.17.1.1	TFilterID	not-accessible	tAutoIPFilterId serves as a primary index and uniquely identifies an application point such as a routed interface or a SAP. This object is obsoleted in release 3.0.
IP tAutoIPFilterEntrySourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.17.1.2	IpAddress	not-accessible	tAutoIPFilterEntrySourceIpAddr specifies the source ip-address and also serves as the secondary index to this table. This object is obsoleted in release 3.0.
ADR tAutoIPFilterEntrySourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.17.1.3	IpAddressPrefixLength	read-only	The value of tAutoIPFilterEntrySourceIpMask indicates the number of bits to be matched in the source ip-address. This object is obsoleted in release 3.0.
tIPv6FilterTable	1.3.6.1.4.1.6527.3.1.2.21.18		not-accessible	Contains a List of all IPv6 filters configured on this system.
tIPv6FilterEntry	1.3.6.1.4.1.6527.3.1.2.21.18.1		not-accessible	Information about a particular IPv6 Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TIP tIPv6FilterId	1.3.6.1.4.1.6527.3.1.2.21.18.1.1	TIPFilterID	not-accessible	The value of the object tIPv6FilterId uniquely identifies a IPv6 filter on this system.
ROW tIPv6FilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.18.1.2	RowStatus	read-create	The value of the object tIPv6FilterRowStatus specifies the status of the IPv6 filter. The object allows entries to be created and deleted in the tIPv6FilterTable.
TIT tIPv6FilterScope	1.3.6.1.4.1.6527.3.1.2.21.18.1.3	TItemScope	read-create	The value of the object tIPv6FilterScope specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
TIT tIPv6FilterDescription	1.3.6.1.4.1.6527.3.1.2.21.18.1.4	TItemDescription	read-create	The value of the object tIPv6FilterDescription specifies a user-provided description for this filter.
TFI tIPv6FilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.18.1.5	TFilterAction	read-create	The value of the object tIPv6FilterDefaultAction specifies the action to be taken for packets that do not match any of the filter entries. The only allowed values for this field are drop(1) and forward(2).
TEN tIPv6FilterRadiusInsertPt	1.3.6.1.4.1.6527.3.1.2.21.18.1.6	TEntryIdOrZero	read-create	The value of tIPv6FilterRadiusInsertPt specifies at what place the filter entries received from Radius will be inserted in the filter. No regular entries, nor Credit Control provided entries can be configured in this range. The value 0 means that no Radius provided filter entries can be inserted in the filter. If tIPv6FilterRadiusInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterRadiusInsertSize	1.3.6.1.4.1.6527.3.1.2.21.18.1.7	TEntryIdOrZero	read-create	The value of tIPv6FilterRadiusInsertSize specifies how many filter entries received from Radius for subscriber hosts can be inserted in the filter. If tIPv6FilterRadiusInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterCreditCntrlInsertPt	1.3.6.1.4.1.6527.3.1.2.21.18.1.8	TEntryIdOrZero	read-create	The value of tIPv6FilterCreditCntrlInsertPt specifies at what place the filter entries received from Credit Control for a particular subscriber host will be inserted in the filter. No regular entries, nor Radius provided entries can be configured in this range. The value 0 means that no Credit Control provided filter entries can be inserted in the filter. If tIPv6FilterCreditCntrlInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterCreditCntrlInsertSize	1.3.6.1.4.1.6527.3.1.2.21.18.1.9	TEntryIdOrZero	read-create	The value of tIPv6FilterCreditCntrlInsertSize specifies how many filter entries received from Credit Control can be inserted in the filter. If tIPv6FilterCreditCntrlInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
I32 tIPv6FilterSubInsertHighWmark	1.3.6.1.4.1.6527.3.1.2.21.18.1.10	Integer32	read-create	The value of the object tIPv6FilterSubInsertHighWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be raised by the agent. The value 0 indicates that no alarm will be generated.
I32 tIPv6FilterSubInsertLowWmark	1.3.6.1.4.1.6527.3.1.2.21.18.1.11	Integer32	read-create	The value of the object tIPv6FilterSubInsertLowWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be cleared by the agent.
U32 tIpv6FilterCreditCntrlNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.18.1.12	Unsigned32	read-only	The value of the object tIpv6FilterCreditCntrlNbrInsertd indicates how many filter entries are currently inserted in the filter on request the credit control application.
U32 tIpv6FilterRadiusNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.18.1.13	Unsigned32	read-only	The value of the object tIpv6FilterRadiusNbrInsertd indicates how many filter entries are currently inserted in the filter on request the RADIUS application.
TLN tIpv6FilterName	1.3.6.1.4.1.6527.3.1.2.21.18.1.14	TLNamedItemOrEmpty	read-create	The value of tIpv6FilterName specifies the name to associate with this filter.
tIPv6FilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.19		not-accessible	A table of all IPv6 filter match entries for all IPv6 filters.
tIPv6FilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.19.1		not-accessible	Information about a particular IPv6 Filter entry. Every IPv6 Filter can have zero or more IPv6 Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tIPv6FilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.19.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every IPv6 filter can have multiple entries, therefore every IPv6 filter entry is identified by the tIPv6FilterId and tIPv6FilterParamsIndex.
ROW tIPv6FilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.19.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPv6FilterParamsTable.
TFI tIPv6FilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.19.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
TIT tIPv6FilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.19.1.4	TItemDescription	read-create	User-provided description for this filter entry.
TFI tIPv6FilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.19.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. The value nat(5) is not supported.
ADR tIPv6FilterParamsForwardNH	1.3.6.1.4.1.6527.3.1.2.21.19.1.6	InetAddressIPv6	read-create	The ipv6-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
T/F tIPv6FilterParamsForwardNHIndirect	1.3.6.1.4.1.6527.3.1.2.21.19.1.7	TruthValue	read-create	tIPv6FilterParamsForwardNHIndirect specifies if the nexthop is directly or indirectly reachable.
TDS tIPv6FilterParamsRemarkDSCP	1.3.6.1.4.1.6527.3.1.2.21.19.1.8	TDSCPFilterActionValue	read-create	The DSCP value that should be remarked in case a packet hits this filter entry.
TDS tIPv6FilterParamsRemarkDSCPMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.9	TDSCPFilterActionValue	read-create	tIPv6FilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value.
DOT tIPv6FilterParamsRemarkDot1p	1.3.6.1.4.1.6527.3.1.2.21.19.1.10	Dot1PPriority	read-create	tIPv6FilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry.
ADR tIPv6FilterParamsSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.19.1.11	InetAddressIPv6	read-create	IPv6 address to match the source-ip of the packet.
ADR tIPv6FilterParamsSourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.12	InetAddressPrefixLength	read-create	The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsSourceIpAddr.
ADR tIPv6FilterParamsDestinationIpAddr	1.3.6.1.4.1.6527.3.1.2.21.19.1.13	InetAddressIPv6	read-create	IPv6 address to match the destination-ip of the packet.
ADR tIPv6FilterParamsDestinationIpMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.14	InetAddressPrefixLength	read-create	The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsDestinationIpAddr.
TIP tIPv6FilterParamsNextHeader	1.3.6.1.4.1.6527.3.1.2.21.19.1.15	TIpProtocol	read-create	IPv6 next header to match. set to -1 to disable matching IPv6 next header. If the next header is changed the next header specific parameters are reset. For instance if next header is changed from TCP to UDP, then the objects tIPv6FilterParamsTcpSyn and tIPv6FilterParamsTcpAck will be turned off. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
TTC tIPv6FilterParamsSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.21.19.1.16	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator.
TTC tIPv6FilterParamsSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.21.19.1.17	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator.
TTC tIPv6FilterParamsSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.21.19.1.18	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used.
TTC tIPv6FilterParamsDestPortValue1	1.3.6.1.4.1.6527.3.1.2.21.19.1.19	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator.
TTC tIPv6FilterParamsDestPortValue2	1.3.6.1.4.1.6527.3.1.2.21.19.1.20	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator.
TTC tIPv6FilterParamsDestPortOperator	1.3.6.1.4.1.6527.3.1.2.21.19.1.21	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used.
TDS tIPv6FilterParamsDSCP	1.3.6.1.4.1.6527.3.1.2.21.19.1.22	TDSCPNameOrEmpty	read-create	DSCP to be matched on the packet.
TIT tIPv6FilterParamsTcpSyn	1.3.6.1.4.1.6527.3.1.2.21.19.1.23	TItemMatch	read-create	If Enabled, matches a TCP Syn as per value of the object.
TIT tIPv6FilterParamsTcpAck	1.3.6.1.4.1.6527.3.1.2.21.19.1.24	TItemMatch	read-create	If Enabled, matches a TCP Ack as per value of the object.
INT tIPv6FilterParamsIcmpCode	1.3.6.1.4.1.6527.3.1.2.21.19.1.25	INTEGER	read-create	Icmp code to be matched. tIPv6FilterParamsIcmpCode complements the object tIPv6FilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
INT tIPv6FilterParamsIcmpType	1.3.6.1.4.1.6527.3.1.2.21.19.1.26	INTEGER	read-create	Icmp type to be matched. tIPv6FilterParamsIcmpType complements the object tIPv6FilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled.
T/F tIPv6FilterParamsCflowdSample	1.3.6.1.4.1.6527.3.1.2.21.19.1.27	TruthValue	read-create	When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPv6FilterParamsCflowdIfSample	1.3.6.1.4.1.6527.3.1.2.21.19.1.28	TruthValue	read-create	When tIPv6FilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
STR tIPv6FilterParamsForwardNHInterface	1.3.6.1.4.1.6527.3.1.2.21.19.1.29	DisplayString	read-create	The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
C64 tIPv6FilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.30	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tIPv6FilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.31	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
T/F tIPv6FilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.19.1.32	TruthValue	read-only	tIPv6FilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
TNA tIPv6FilterParamsForwardRedPlcy	1.3.6.1.4.1.6527.3.1.2.21.19.1.33	TNamedItemOrEmpty	read-create	tIPv6FilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop.
ADR tIPv6FilterParamsActiveDest	1.3.6.1.4.1.6527.3.1.2.21.19.1.34	InetAddressIPv6	read-only	tIPv6FilterParamsActiveDest indicates the IPv6 address of the active destination for this IPv6 filter. A value of 0 indicates that there is currently no active destination.
TNA tIPv6FilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.19.1.35	TNamedItemOrEmpty	read-create	tIPv6FilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TTI tIPv6FilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.19.1.36	TTimeRangeState	read-only	tIPv6FilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPv6FilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
C64 tIPv6FilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.37	Counter64	read-only	The value of tIPv6FilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
C64 tIPv6FilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.38	Counter64	read-only	This tIPv6FilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
TMN tIPv6FilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.19.1.39	TmnxServId	read-only	tIPv6FilterParamsFwdSvcId indicates the service id of the destination for this filter entry. The value 0 indicates that there is no active SAP or SDP destination.
TMN tIPv6FilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.19.1.40	TmnxPortID	read-create	tIPv6FilterParamsFwdSapPortId specifies the sap port id of the destination for this filter entry. The value 0 indicates that there is no SAP destination defined. A value different from 0 can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPv6FilterParamsFwdSdpBind is '0'.
TMN tIPv6FilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.19.1.41	TmnxEncapVal	read-create	tIPv6FilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this filter entry. A value different from 0 can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPv6FilterParamsFwdSdpBind has value '0'. The value 0 indicates that either 1) the sap encapsulation value is not specified when tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
SDP tIPv6FilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.19.1.42	SdpBindId	read-create	tIPv6FilterParamsFwdSdpBind specifies the sdp bind id of the destination for this filter entry. The value '0' indicates that there is currently no SDP binding defined. A value different from '0' can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSapEncapVal have value 0.
tFilterGroupInsertedEntries	1.3.6.1.4.1.6527.3.1.2.21.20
TFI tFltrGrpInsrtdEntriesFilterType	1.3.6.1.4.1.6527.3.1.2.21.20.1	TFilterType	read-write	tFltrGrpInsrtdEntriesFilterType specifies the type of the filter referred to by tFltrGrpInsrtdEntriesFilterId. Inserted entries can only occur in 'fltrtypeselIp' and 'fltrtypeselIpv6'
TFI tFltrGrpInsrtdEntriesFilterId	1.3.6.1.4.1.6527.3.1.2.21.20.2	TFilterID	read-write	tFltrGrpInsrtdEntriesFilterId specifies for which filter the inserted entries must be grouped.
TFI tFltrGrpInsrtdEntriesApplication	1.3.6.1.4.1.6527.3.1.2.21.20.3	TFilterSubInsSpaceOwner	read-write	tFltrGrpInsrtdEntriesApplication specifies for which application the the inserted entries must be grouped.
INT tFltrGrpInsrtdEntriesLocation	1.3.6.1.4.1.6527.3.1.2.21.20.4	INTEGER	read-write	tFltrGrpInsrtdEntriesLocation specifies at what location the inserted entries must be grouped.
INT tFltrGrpInsrtdEntriesResult	1.3.6.1.4.1.6527.3.1.2.21.20.5	INTEGER	read-only	tFltrGrpInsrtdEntriesResult indicates the success or failure of the last requested grouping request on inserted entries.
STR tFltrGrpInsrtdEntriesFeedback	1.3.6.1.4.1.6527.3.1.2.21.20.6	DisplayString	read-only	tFltrGrpInsrtdEntriesFeedback may indicate additional info on the last inserted filter entries grouping action performed.
T/F tFltrGrpInsrtdEntriesExecute	1.3.6.1.4.1.6527.3.1.2.21.20.7	TruthValue	read-write	Setting the object tFltrGrpInsrtdEntriesExecute to 'true' will cause the system to attempt to execute te grouping command as specified by the other MIB objects in the tFilterGroupInsertedEntries mibgroup. When read the value will always indicate 'false'. The result of the command can be found in tFltrGrpInsrtdEntriesResult and tFltrGrpInsrtdEntriesFeedback
TIM tDhcpFilterTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.21	TimeStamp	read-only	The value of tDhcpFilterTableLastChanged indicates the sysUpTime at the time of the last modification to tDhcpFilterTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tDhcpFilterTable	1.3.6.1.4.1.6527.3.1.2.21.22		not-accessible	Contains a list of all DHCP filters configured on this system.
tDhcpFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.22.1		not-accessible	Information about a particular DHCP filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
TDH tDhcpFilterId	1.3.6.1.4.1.6527.3.1.2.21.22.1.1	TDHCPFilterID	not-accessible	Uniquely identifies a mac filter as configures on this system.
ROW tDhcpFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.22.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tDhcpFilterTable.
TIM tDhcpFilterLastChanged	1.3.6.1.4.1.6527.3.1.2.21.22.1.3	TimeStamp	read-only	The value of tDhcpFilterLastChanged indicates the timestamp of last change to this row in tDhcpFilterTable.
TIT tDhcpFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.22.1.4	TItemDescription	read-create	User-provided description for this filter.
TIM tDhcpFilterParamsTblLastChanged	1.3.6.1.4.1.6527.3.1.2.21.23	TimeStamp	read-only	The value of tDhcpFilterParamsTblLastChanged indicates the sysUpTime at the time of the last modification to tDhcpFilterParamsTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tDhcpFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.24		not-accessible	A table of all DHCP filter match entries for all DHCP filters.
tDhcpFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.24.1		not-accessible	Information about a particular DHCP filter entry. Every DHCP filter can have zero or more DHCP filter match entries. A filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
TEN tDhcpFilterParamsId	1.3.6.1.4.1.6527.3.1.2.21.24.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every DHCP filter can have multiple entries, therefore every DHCP filter entry is identified by the tDhcpFilterId and tDhcpFilterParamsId.
ROW tDhcpFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.24.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tDhcpFilterParamsTable.
TIM tDhcpFilterParamsLastChanged	1.3.6.1.4.1.6527.3.1.2.21.24.1.3	TimeStamp	read-only	The value of tDhcpFilterParamsLastChanged indicates the timestamp of last change to this row in tDhcpFilterParamsTable.
INT tDhcpFilterParamsOptionNumber	1.3.6.1.4.1.6527.3.1.2.21.24.1.4	INTEGER	read-create	The value of tDhcpFilterParamsOptionNumber specifies the number of the DHCP option to filter on.
TDH tDhcpFilterParamsOptionMatch	1.3.6.1.4.1.6527.3.1.2.21.24.1.5	TDhcpFilterMatch	read-create	The value of tDhcpFilterParamsOptionMatch specifies the criteria that the DHCP option must match to trigger this filter entry. The value present(1) specifies that the DHCP option must be present, the value absent(2) specifies that the DHCP option must be absent. In these cases tDhcpFilterParamsOptionValue will be reset to an empty string. A value string(3), string-exact(4), string-invert(5), string-exact-invert(6), hex(7), hex-exact(8), hex-invert(9) or hex-exact-invert(10) requires an octet string to be present in tDhcpFilterParamsOptionValue to match against.
TDH tDhcpFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.24.1.6	TDhcpFilterAction	read-create	The action to take for DHCP host creation requests that match this filter entry. The value none(1) specifies normal host creation behaviour, the value bypass-host-creation(2) specifies to bypass host creation, the value drop(3) specifies to drop the DHCP message.
OCT tDhcpFilterParamsOptionValue	1.3.6.1.4.1.6527.3.1.2.21.24.1.7	OCTET STRING	read-create	The value of the object tDhcpFilterParamsOptionValue specifies the matching pattern for the filtered DHCP option. This object is mandatory at creation time. A zero length value is only allowed when the value of tDhcpFilterParamsOptionMatch is present(1) or absent(2).
TIM tMacFilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.25	TimeStamp	read-only	The value of tMacFilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tMacFilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tMacFilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.26		not-accessible	A table that contains MAC filter name information. Entries are created automatically by the system when tMacFilterName object is set for the MAC filter.
tMacFilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.26.1		not-accessible	Basic information about a specific MAC filter name.
TAN tMacFilterNameId	1.3.6.1.4.1.6527.3.1.2.21.26.1.1	TAnyFilterID	read-only	The value of the object tMacFilterNameId specifies the filter name associated with this MAC filter.
ROW tMacFilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.26.1.2	RowStatus	read-only	This value of the object tMacFilterNameRowStatus specifies the status of this row.
TIM tMacFilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.26.1.3	TimeStamp	read-only	The value of tMacFilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tIpFilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.27	TimeStamp	read-only	The value of tIpFilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tIpFilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tIpFilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.28		not-accessible	A table that contains IP filter name information. Entries are created automatically by the system when tIpFilterName object is set for the IP filter.
tIpFilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.28.1		not-accessible	Basic information about a specific IP filter name.
TAN tIpFilterNameId	1.3.6.1.4.1.6527.3.1.2.21.28.1.1	TAnyFilterID	read-only	The value of the object tIpFilterNameId specifies the filter name associated with this IP filter.
ROW tIpFilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.28.1.2	RowStatus	read-only	This value of the object tIpFilterNameRowStatus specifies the status of this row.
TIM tIpFilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.28.1.3	TimeStamp	read-only	The value of tIpFilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tIpv6FilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.29	TimeStamp	read-only	The value of tIpv6FilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tIpv6FilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tIpv6FilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.30		not-accessible	A table that contains IPv6 filter name information. Entries are created automatically by the system when tIpv6FilterName object is set for the IPv6 filter.
tIpv6FilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.30.1		not-accessible	Basic information about a specific IPv6 filter name.
TAN tIpv6FilterNameId	1.3.6.1.4.1.6527.3.1.2.21.30.1.1	TAnyFilterID	read-only	The value of the object tIpv6FilterNameId specifies the filter name associated with this IPv6 filter.
ROW tIpv6FilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.30.1.2	RowStatus	read-only	This value of the object tIpv6FilterNameRowStatus specifies the status of this row.
TIM tIpv6FilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.30.1.3	TimeStamp	read-only	The value of tIpv6FilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tFilterLiObjects	1.3.6.1.4.1.6527.3.1.2.21.31
TIM tLiReservedBlockTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.1	TimeStamp	read-only	The object tLiReservedBlockTableLastChanged indicates the sysUpTime at the time of the last modification of tLiReservedBlockTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tLiReservedBlockTable	1.3.6.1.4.1.6527.3.1.2.21.31.2		not-accessible	The table tLiReservedBlockTable describes LI reserved blocks. In this release this table can have at most one entry.
tLiReservedBlockEntry	1.3.6.1.4.1.6527.3.1.2.21.31.2.1		not-accessible	Information about an LI reserved block. This block can be associated with one or more filters to reserve a number of entries in those filters for LI.
TNA tLiReservedBlockName	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.1	TNamedItem	not-accessible	The object tLiReservedBlockName uniquely identifies an LI reserved block.
ROW tLiReservedBlockRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.2	RowStatus	read-create	The object tLiReservedBlockRowStatus specifies the status of this row.
TIM tLiReservedBlockLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.3	TimeStamp	read-only	The object tLiReservedBlockLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tLiReservedBlockDescription	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.4	TItemDescription	read-create	The object tLiReservedBlockDescription specifies a description for this LI reserved block.
TEN tLiReservedBlockStart	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.5	TEntryIdOrZero	read-create	The object tLiReservedBlockStart specifies the starting entry of the LI reserved block. If set to '0' no block is reserved. In this case the value of the object tLiReservedBlockSize will be set to '0' by the system.
TEN tLiReservedBlockSize	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.6	TEntryIdOrZero	read-create	The object tLiReservedBlockSize specifies the size of the LI reserved block. If set to '0' no block is reserved. In this case the value of the object tLiReservedBlockStart will be set to '0' by the system.
TIM tLiReservedBlockFltrTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.3	TimeStamp	read-only	The value of tLiReservedBlockFltrTableLastChg indicates the sysUpTime at the time of the last modification of tLiReservedBlockFltrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tLiReservedBlockFltrTable	1.3.6.1.4.1.6527.3.1.2.21.31.4		not-accessible	The table tLiReservedBlockFltrTable contains associations between normal filters and LI block reservations.
tLiReservedBlockFltrEntry	1.3.6.1.4.1.6527.3.1.2.21.31.4.1		not-accessible	An association of a normal filter with an LI block reservation. In this release, only MAC filters are supported.
TFI tLiReservedBlockFltrType	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.1	TFilterType	not-accessible	The object tLiReservedBlockFltrType specifies the type of filter this LI block reservation applies to. In this release only MAC filters are supported.
TFI tLiReservedBlockFltrIdStart	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.2	TFilterID	not-accessible	The object tLiReservedBlockFltrIdStart specifies the ID of the first filter to apply an LI block reservation. In this release, tLiReservedBlockFltrIdStart must be equal to tLiReservedBlockFltrIdEnd.
TFI tLiReservedBlockFltrIdEnd	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.3	TFilterID	not-accessible	The object tLiReservedBlockFltrIdEnd specifies the ID of the last filter to apply an LI block reservation. In this release, tLiReservedBlockFltrIdEnd must be equal to tLiReservedBlockFltrIdStart.
ROW tLiReservedBlockFltrRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.4	RowStatus	read-create	The object tLiReservedBlockFltrRowStatus specifies the status of this row.
TIM tLiReservedBlockFltrLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.5	TimeStamp	read-only	The object tLiReservedBlockFltrLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiFilterTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.5	TimeStamp	read-only	The object tLiFilterTableLastChanged indicates the sysUpTime at the time of the last modification of tLiFilterTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tLiFilterTable	1.3.6.1.4.1.6527.3.1.2.21.31.6		not-accessible	The table tLiFilterTable contains information about all LI MAC filters.
tLiFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.31.6.1		not-accessible	An LI MAC filter.
TFI tLiFilterType	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.1	TFilterType	not-accessible	The object tLiFilterType specifies the type of this LI filter. In this release only MAC filters are supported.
TNA tLiFilterName	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.2	TNamedItem	not-accessible	The object tLiFilterName indicates the unique name of this LI MAC Filter.
ROW tLiFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.3	RowStatus	read-create	The object tLiFilterRowStatus specifies the status of this row.
TIM tLiFilterLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.4	TimeStamp	read-only	The object tLiFilterLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tLiFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.5	TItemDescription	read-create	The object tLiFilterDescription specifies a description for this LI MAC filter.
TIM tLiFilterAssociationTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.7	TimeStamp	read-only	The object tLiFilterAssociationTableLastChg indicates the sysUpTime at the time of the last modification of tLiFilterTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tLiFilterAssociationTable	1.3.6.1.4.1.6527.3.1.2.21.31.8		not-accessible	The table tLiFilterAssociationTable contains information about the associations between LI filters and normal filters.
tLiFilterAssociationEntry	1.3.6.1.4.1.6527.3.1.2.21.31.8.1		not-accessible	An association between an LI filter and a normal filter.
TFI tLiFilterAssociationFltrId	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.1	TFilterID	not-accessible	The object tLiFilterAssociationFltrId indicates the id of the normal filter in the association described by this entry.
ROW tLiFilterAssociationRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.2	RowStatus	read-create	The object tLiFilterAssociationRowStatus specifies the status of this row.
TIM tLiFilterAssociationLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.3	TimeStamp	read-only	The object tLiFilterAssociationLastChg indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiMacFilterParamsTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.9	TimeStamp	read-only	The object tLiMacFilterParamsTableLastChg indicates the sysUpTime at the time of the last modification of tLiMacFilterParamsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
tLiMacFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.31.10		not-accessible	The table tLiMacFilterParamsTable contains all LI MAC filter match entries for all LI MAC filters.
tLiMacFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.31.10.1		not-accessible	An LI MAC filter match entry.
TEN tLiMacFilterParamsId	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.1	TEntryId	not-accessible	The object tLiMacFilterParamsId indicates the secondary index for this entry. Every LI MAC filter may have multiple match entries, therefore every LI MAC filter match entry is identified by the tLiFilterName and tLiMacFilterParamsId.
ROW tLiMacFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.2	RowStatus	read-create	The object tLiMacFilterParamsRowStatus specifies the status of this row.
TIM tLiMacFilterParamsLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.3	TimeStamp	read-only	The object tLiMacFilterParamsLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIT tLiMacFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.4	TItemDescription	read-create	The object tLiMacFilterParamsDescription specifies a description for this entry.
TFR tLiMacFilterParamsFrameType	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.5	TFrameType	read-create	The object tLiMacFilterParamsFrameType specifies the type of mac frame for which we are defining this match criterium.
MAC tLiMacFilterParamsSrcMAC	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.6	MacAddress	read-create	The object tLiMacFilterParamsSrcMAC specifies the source MAC address to match for this LI MAC filter entry.
MAC tLiMacFilterParamsSrcMACMask	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.7	MacAddress	read-create	The object tLiMacFilterParamsSrcMACMask specifies the source MAC mask value for this LI MAC filter match entry. The mask is ANDed with the MAC to match tLiMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. A one bit means match this bit with tLiMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criterium. If set to all zero, the value of tLiMacFilterParamsSrcMAC will bet set to all zero by the system, and any attept to change this value will be ignored.
MAC tLiMacFilterParamsDstMAC	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.8	MacAddress	read-create	The object tLiMacFilterParamsDstMAC specifies the destination MAC to match for this LI MAC filter entry.
MAC tLiMacFilterParamsDstMACMask	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.9	MacAddress	read-create	The object tLiMacFilterParamsDstMACMask specifies the destination MAC mask value for this LI MAC filter match entry. The mask is ANDed with the MAC to match tLiMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tLiMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria. If set to all zero, the value of tLiMacFilterParamsDstMAC will bet set to all zero by the system, and any attept to change this value will be ignored.
C64 tLiMacFilterParamsIngrHitCount	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.10	Counter64	read-only	The object tLiMacFilterParamsIngrHitCount indicates the number of times an ingress packet matched this entry.
C64 tLiMacFilterParamsEgrHitCount	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.11	Counter64	read-only	This object tLiMacFilterParamsEgrHitCount indicates the number of times an egress packet matched this entry.
C64 tLiMacFilterParamsIngrHitBytes	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.12	Counter64	read-only	The value of tLiMacFilterParamsIngrHitBytes indicates the number of bytes of all ingress packets that matched this entry.
C64 tLiMacFilterParamsEgrHitBytes	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.13	Counter64	read-only	The value of tLiMacFilterParamsEgrHitBytes indicates the number of bytes of all egress packets that matched this entry.
TIM tFilterPrefixListTableLstChng	1.3.6.1.4.1.6527.3.1.2.21.32	TimeStamp	read-only	The object tFilterPrefixListTableLstChng indicates the sysUpTime at the time of the last modification of tFilterPrefixListTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains the value zero.
tFilterPrefixListTable	1.3.6.1.4.1.6527.3.1.2.21.33		not-accessible	The table tFilterPrefixListTable contains an entry for each prefix list defined in the filter area.
tFilterPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.21.33.1		not-accessible	An entry in the tFilterPrefixListTable.
TFL tFilterPrefixListType	1.3.6.1.4.1.6527.3.1.2.21.33.1.1	TFltrPrefixListType	not-accessible	The object TFltrPrefixListType specifies the type of prefix list for the prefix list tFilterPrefixListName.
TNA tFilterPrefixListName	1.3.6.1.4.1.6527.3.1.2.21.33.1.2	TNamedItem	not-accessible	The object tFilterPrefixListName specifies the name given to this prefix list.
ROW tFilterPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.21.33.1.3	RowStatus	read-create	The object tFilterPrefixListRowStatus specifies the status of this row.
TIM tFilterPrefixListLastChanged	1.3.6.1.4.1.6527.3.1.2.21.33.1.4	TimeStamp	read-only	The object tFilterPrefixListLastChanged indicates the sysUpTime at the time of the last modification of this row. If no changes were made to the row since the last re-initialization of the local network management subsystem, then this object contains the value zero.
TIT tFilterPrefixListDescription	1.3.6.1.4.1.6527.3.1.2.21.33.1.5	TItemDescription	read-create	The object tFilterPrefixListDescription specifies a description for this row.
TIM tFilterPrefixListEntryTblLstChg	1.3.6.1.4.1.6527.3.1.2.21.34	TimeStamp	read-only	The object tFilterPrefixListEntryTblLstChg indicates the sysUpTime at the time of the last modification of tFilterPrefixListEntryTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains the value zero.
tFilterPrefixListEntryTable	1.3.6.1.4.1.6527.3.1.2.21.35		not-accessible	The table tFilterPrefixListEntryTable contains an entry for each prefix defined in any prefix list defined in the filter area.
tFilterPrefixListEntryEntry	1.3.6.1.4.1.6527.3.1.2.21.35.1		not-accessible	An entry in the tFilterPrefixListEntryTable.
IPt tFilterPrefixListEntryPrefixType	1.3.6.1.4.1.6527.3.1.2.21.35.1.1	InetAddressType	not-accessible	The object tFilterPrefixListEntryPrefixType specifies whether the prefix specified in tFilterPrefixListEntryPrefix is an IPv4 or IPv6 prefix. The value of tFilterPrefixListEntryPrefixType must match the value of the object tFilterPrefixListType.
IP tFilterPrefixListEntryPrefix	1.3.6.1.4.1.6527.3.1.2.21.35.1.2	InetAddress	not-accessible	The value of tFilterPrefixListEntryPrefix specifies the IP prefix of this prefix list entry.
ADR tFilterPrefixListEntryPrefixLen	1.3.6.1.4.1.6527.3.1.2.21.35.1.3	InetAddressPrefixLength	not-accessible	The value of tFilterPrefixListEntryPrefixLen specifiesd the IP prefix length of this prefix list entry.
ROW tFilterPrefixListEntryRowStatus	1.3.6.1.4.1.6527.3.1.2.21.35.1.4	RowStatus	read-create	The object tFilterPrefixListEntryRowStatus specifies the status of this row.
tFilterNotificationsPrefix	1.3.6.1.4.1.6527.3.1.3.21
tFilterNotifications	1.3.6.1.4.1.6527.3.1.3.21.0
NTF tIPFilterPBRPacketsDrop	1.3.6.1.4.1.6527.3.1.3.21.0.1			The tIPFilterPBRPacketsDrop event is generated either when the configuration of a forwarding action refers to an invalid/unconfigured next-hop or if the active interface goes down operationally in the process of active filtering.
NTF tFilterEntryActivationFailed	1.3.6.1.4.1.6527.3.1.3.21.0.2			The tFilterEntryActivationFailed event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event is generated when this installation failed because of resource problems.
NTF tFilterEntryActivationRestored	1.3.6.1.4.1.6527.3.1.3.21.0.3			The tFilterEntryActivationRestored event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event tFilterEntryActivationFailed is generated when this installation originally failed because of resources problems, The notification tFilterEntryActivationRestored is sent when either the time range associated with the filter is no longer active, or when the filter entry was installed due to the availability of new resources.
NTF tFilterSubInsSpaceAlarmRaised	1.3.6.1.4.1.6527.3.1.3.21.0.4			The tFilterSubInsSpaceAlarmRaised notification is generated when the utilization of a filter entry range that was reserved for filter entry insertion increases to the configured high watermark for his filter
NTF tFilterSubInsSpaceAlarmCleared	1.3.6.1.4.1.6527.3.1.3.21.0.5			The tFilterSubInsSpaceAlarmCleared notification is generated when the utilization of a filter entry range that was reserved for filter entry insertion dropped below to the configured low watermark for his filter.
NTF tFilterSubInsFltrEntryDropped	1.3.6.1.4.1.6527.3.1.3.21.0.6			The tFilterSubInsFltrEntryDropped notification is generated when a request to insert a filter entry was not successful.
NTF tFilterBgpFlowSpecProblem	1.3.6.1.4.1.6527.3.1.3.21.0.7			The tFilterBgpFlowSpecProblem notification is generated when a BGP flowspec NLRI is received in the filter module that cannot be treated - i.e. for which no filter entry is installed in the system, or when there is a problem inserting (new) or reshuffling (existing) flowspec or merged filter entries.

Counter32 (2)
C32 tFilterRSTCounter32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.7	Counter32	read-create	The value tFilterRSTRespType is 'counter32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
C32 tFilterRSTLastCounter32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.14	Counter32	read-only	The value tFilterRSTLastType is 'counter32'.
Counter64 (18)
C64 tFilterRSTCounter64Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.14	Counter64	read-create	The response value if tFilterRSTRespType is set to 'counter64'. This field cannot be modified after creation. Any change attempts will be silently discarded.
C64 tFilterRSTLastCounter64Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.21	Counter64	read-only	The value tFilterRSTLastType is 'counter64'.
C64 tIPFilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.37	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
C64 tIPFilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.51	Counter64	read-only	The value of tIPFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
C64 tIPFilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.36	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tIPFilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.2.1.50	Counter64	read-only	The value of tIPFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
C64 tIPv6FilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.31	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
C64 tIPv6FilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.38	Counter64	read-only	This tIPv6FilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
C64 tIPv6FilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.30	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tIPv6FilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.19.1.37	Counter64	read-only	The value of tIPv6FilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
C64 tLiMacFilterParamsEgrHitBytes	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.13	Counter64	read-only	The value of tLiMacFilterParamsEgrHitBytes indicates the number of bytes of all egress packets that matched this entry.
C64 tLiMacFilterParamsEgrHitCount	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.11	Counter64	read-only	This object tLiMacFilterParamsEgrHitCount indicates the number of times an egress packet matched this entry.
C64 tLiMacFilterParamsIngrHitBytes	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.12	Counter64	read-only	The value of tLiMacFilterParamsIngrHitBytes indicates the number of bytes of all ingress packets that matched this entry.
C64 tLiMacFilterParamsIngrHitCount	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.10	Counter64	read-only	The object tLiMacFilterParamsIngrHitCount indicates the number of times an ingress packet matched this entry.
C64 tMacFilterParamsEgressHitCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.22	Counter64	read-only	This object indicates the number of times an egress packet matched this entry.
C64 tMacFilterParamsEgrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.32	Counter64	read-only	The value of tMacFilterParamsEgrHitByteCount indicates the number of bytes of all egress packets that matched this entry.
C64 tMacFilterParamsIngressHitCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.21	Counter64	read-only	This object indicates the number of times an ingress packet matched this entry.
C64 tMacFilterParamsIngrHitByteCount	1.3.6.1.4.1.6527.3.1.2.21.4.1.31	Counter64	read-only	The value of tMacFilterParamsIngrHitByteCount indicates the number of bytes of all ingress packets that matched this entry.
DisplayString (10)
STR tFilterAlarmDescription	1.3.6.1.4.1.6527.3.1.2.21.8.3	DisplayString	accessible-for-notify	The value of the object tFilterAlarmDescription is a printable character string which contains information about the cause of the problem.
STR tFilterRSTCommunity	1.3.6.1.4.1.6527.3.1.2.21.12.1.4	DisplayString	read-create	The value of tFilterRSTCommunity is the SNMPv1 or SNMPv2c Community String or the SNMPv3 Context Name used to conduct this SNMP test as described in RFC2571 and RFC2737. When the value of tFilterRSTSNMPVersion is 'snmpv1' or 'snmpv2c' this object represents a community string. When the value of tFilterRSTSNMPVersion is 'snmpv3' this object represents a SNMPv3 context name. The value of this object can only be changed if the object tFilterRSTOID is changed at the same time.
STR tFilterRUTHTTPVersion	1.3.6.1.4.1.6527.3.1.2.21.14.1.4	DisplayString	read-create	The HTTP Version to be used while performing the URL test. The system by default uses HTTP Version 1.1 until explicitly specified.
STR tFilterRUTURL	1.3.6.1.4.1.6527.3.1.2.21.14.1.3	DisplayString	read-create	This object holds the URL to be probed.
STR tFltrFlowSpecProblemDescription	1.3.6.1.4.1.6527.3.1.2.21.8.9	DisplayString	accessible-for-notify	The value of the object tFltrFlowSpecProblem may contain a more detailed problem description then as given by tFltrFlowSpecProblem.
STR tFltrGrpInsrtdEntriesFeedback	1.3.6.1.4.1.6527.3.1.2.21.20.6	DisplayString	read-only	tFltrGrpInsrtdEntriesFeedback may indicate additional info on the last inserted filter entries grouping action performed.
STR tIPFilterParamsForwardNHInterface	1.3.6.1.4.1.6527.3.1.2.21.2.1.35	DisplayString	read-create	The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
STR tIPFilterParamsRedirectURL	1.3.6.1.4.1.6527.3.1.2.21.2.1.47	DisplayString	read-create	The value of tIPFilterParamsRedirectURL specifies the URL to redirect to, when the value of tIPFilterParamsAction is 'httpRedirect'. Note that the value of tIPFilterParamsRedirectURL is silently cleared by the system if tIPFilterParamsAction is set to any value other than httpRedirect.
STR tIPv6FilterParamsForwardNHInterface	1.3.6.1.4.1.6527.3.1.2.21.19.1.29	DisplayString	read-create	The interface name for the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
STR tMacFilterParamsRedirectURL	1.3.6.1.4.1.6527.3.1.2.21.4.1.30	DisplayString	read-create	The value of tMacFilterParamsRedirectURL specifies the URL to redirect to, when the value of tMacFilterParamsAction is 'httpRedirect'.
Dot1PPriority (4)
DOT tIPFilterParamsRemarkDot1p	1.3.6.1.4.1.6527.3.1.2.21.2.1.10	Dot1PPriority	read-create	tIPFilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry.
DOT tIPv6FilterParamsRemarkDot1p	1.3.6.1.4.1.6527.3.1.2.21.19.1.10	Dot1PPriority	read-create	tIPv6FilterParamsRemarkDot1p specifies the Dot1p value that needs to be remarked on the packet if it hits this filter entry.
DOT tMacFilterParamsDot1pMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.13	Dot1PPriority	read-create	IEEE 802.1p priority mask value for this policy MAC filter entry. Use zero to disable matching, use 7 to match everything.
DOT tMacFilterParamsDot1pValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.12	Dot1PPriority	read-create	IEEE 802.1p priority value for this policy MAC filter entry. Use -1 to disable matching this filter criteria.
Gauge32 (3)
G32 tFilterLogBindings	1.3.6.1.4.1.6527.3.1.2.21.6.3	Gauge32	read-only	tFilterLogBindings maintains the count of the configured filter log bindings presently existing on the system. The bindings get instantiated when the filter is instantiated
G32 tFilterLogInstances	1.3.6.1.4.1.6527.3.1.2.21.6.2	Gauge32	read-only	tFilterLogInstances maintains the instances of filter logs presently existing on the system
G32 tFilterLogMaxInstances	1.3.6.1.4.1.6527.3.1.2.21.6.1	Gauge32	read-only	tFilterLogMaxInstances maintains the maximum allowed instances of filter logs allowed on the system
InetAddress (1)
IP tFilterPrefixListEntryPrefix	1.3.6.1.4.1.6527.3.1.2.21.35.1.2	InetAddress	not-accessible	The value of tFilterPrefixListEntryPrefix specifies the IP prefix of this prefix list entry.
InetAddressIPv6 (4)
ADR tIPv6FilterParamsActiveDest	1.3.6.1.4.1.6527.3.1.2.21.19.1.34	InetAddressIPv6	read-only	tIPv6FilterParamsActiveDest indicates the IPv6 address of the active destination for this IPv6 filter. A value of 0 indicates that there is currently no active destination.
ADR tIPv6FilterParamsDestinationIpAddr	1.3.6.1.4.1.6527.3.1.2.21.19.1.13	InetAddressIPv6	read-create	IPv6 address to match the destination-ip of the packet.
ADR tIPv6FilterParamsForwardNH	1.3.6.1.4.1.6527.3.1.2.21.19.1.6	InetAddressIPv6	read-create	The ipv6-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
ADR tIPv6FilterParamsSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.19.1.11	InetAddressIPv6	read-create	IPv6 address to match the source-ip of the packet.
InetAddressPrefixLength (3)
ADR tFilterPrefixListEntryPrefixLen	1.3.6.1.4.1.6527.3.1.2.21.35.1.3	InetAddressPrefixLength	not-accessible	The value of tFilterPrefixListEntryPrefixLen specifiesd the IP prefix length of this prefix list entry.
ADR tIPv6FilterParamsDestinationIpMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.14	InetAddressPrefixLength	read-create	The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsDestinationIpAddr.
ADR tIPv6FilterParamsSourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.12	InetAddressPrefixLength	read-create	The IPv6 Mask value for this policy IPv6 Filter entry. The mask is ANDed with the IPv6 to match the tIPv6FilterParamsSourceIpAddr.
InetAddressType (1)
IPt tFilterPrefixListEntryPrefixType	1.3.6.1.4.1.6527.3.1.2.21.35.1.1	InetAddressType	not-accessible	The object tFilterPrefixListEntryPrefixType specifies whether the prefix specified in tFilterPrefixListEntryPrefix is an IPv4 or IPv6 prefix. The value of tFilterPrefixListEntryPrefixType must match the value of the object tFilterPrefixListType.
INTEGER (21)
INT tDhcpFilterParamsOptionNumber	1.3.6.1.4.1.6527.3.1.2.21.24.1.4	INTEGER	read-create	The value of tDhcpFilterParamsOptionNumber specifies the number of the DHCP option to filter on.
INT tFilterPBRDropReason	1.3.6.1.4.1.6527.3.1.2.21.8.1	INTEGER	accessible-for-notify	Used by tIPFilterPBRPacketsDrop to report the failure reason code.
INT tFilterRPTLastAction	1.3.6.1.4.1.6527.3.1.2.21.16.1.8	INTEGER	read-only	tFilterRPTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRPTHoldDown seconds.
INT tFilterRSTLastAction	1.3.6.1.4.1.6527.3.1.2.21.12.1.23	INTEGER	read-only	tFilterRSTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRSTHoldDown seconds.
INT tFilterRSTLastType	1.3.6.1.4.1.6527.3.1.2.21.12.1.13	INTEGER	read-only	tFilterRSTLastType maintains the type of the value received. A value of none(0) indicated that no value has been received
INT tFilterRSTRespAction	1.3.6.1.4.1.6527.3.1.2.21.13.1.3	INTEGER	read-create	tFilterRSTRespAction specifies the type of change that should be made to the destination priority tFilterRDOperPriority, if the return value is same as tFilterRSTRespId. If tFilterRSTRespPrioChange is 0 this field will be set to 'disable'. This field cannot be modified after creation. Any change attempts will be silently discarded.
INT tFilterRSTRespType	1.3.6.1.4.1.6527.3.1.2.21.13.1.6	INTEGER	read-create	tFilterRSTRespType maintains the type of the value to be received. Note: types 'objectId' and 'counter64' are not supported for now, and will be rejected when used. This field cannot be modified after creation. Any change attempts will be silently discarded.
INT tFilterRSTSNMPVersion	1.3.6.1.4.1.6527.3.1.2.21.12.1.5	INTEGER	read-create	tFilterRSTSNMPVersion specifies the SNMP PDU format to be used while conducting the test.
INT tFilterRUTLastAction	1.3.6.1.4.1.6527.3.1.2.21.14.1.12	INTEGER	read-only	tFilterRUTLastAction maintains impact that the last test probe made on the operational status of the destination as maintained in tFilterRDOperState. If the last action was 'disable', the destination may not be used for tFilterRUTHoldDown seconds.
INT tFilterRUTRespAction	1.3.6.1.4.1.6527.3.1.2.21.15.1.4	INTEGER	read-create	If the tFilterRUTRespAction is either 'increase(1)' or 'decrease(2)' tFilterRUTRespPrioChange specifies the offset to be applied to the destination base priority (tFilterRDAdminPriority) in order to compute the tFilterRDOperPriority as a result of this test. If the tFilterRUTRespAction is set to 'disable(3)', on the reception of the specified response, the destination will be deemed unusable and the tFilterRDOperPriority will be set to '0'. The value of tFilterRUTRespAction will be forced by the system to the value 'disable(3)' if the tFilterRUTRespPrioChange has the value '0'. Any change attempts will be silently discarded in this case.
INT tFilterThresholdReached	1.3.6.1.4.1.6527.3.1.2.21.8.7	INTEGER	accessible-for-notify	The value of the object tFilterThresholdReached, specifies the threshold reached at the moment this notificastion was generated.
INT tFltrFlowSpecProblem	1.3.6.1.4.1.6527.3.1.2.21.8.8	INTEGER	accessible-for-notify	The value of the object tFltrFlowSpecProblem, indicates which problem has occured while processing a BGP flowspec NLRI in the filter module.
INT tFltrGrpInsrtdEntriesLocation	1.3.6.1.4.1.6527.3.1.2.21.20.4	INTEGER	read-write	tFltrGrpInsrtdEntriesLocation specifies at what location the inserted entries must be grouped.
INT tFltrGrpInsrtdEntriesResult	1.3.6.1.4.1.6527.3.1.2.21.20.5	INTEGER	read-only	tFltrGrpInsrtdEntriesResult indicates the success or failure of the last requested grouping request on inserted entries.
INT tIPFilterParamsIcmpCode	1.3.6.1.4.1.6527.3.1.2.21.2.1.31	INTEGER	read-create	Icmp code to be matched. tIPFilterParamsIcmpCode complements the object tIPFilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
INT tIPFilterParamsIcmpType	1.3.6.1.4.1.6527.3.1.2.21.2.1.32	INTEGER	read-create	Icmp type to be matched. tIPFilterParamsIcmpType complements the object tIPFilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled.
INT tIPv6FilterParamsIcmpCode	1.3.6.1.4.1.6527.3.1.2.21.19.1.25	INTEGER	read-create	Icmp code to be matched. tIPv6FilterParamsIcmpCode complements the object tIPv6FilterParamsIcmpType. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp code matching is not enabled.
INT tIPv6FilterParamsIcmpType	1.3.6.1.4.1.6527.3.1.2.21.19.1.26	INTEGER	read-create	Icmp type to be matched. tIPv6FilterParamsIcmpType complements the object tIPv6FilterParamsIcmpCode. Both of them need to be set to actually enable ICMP matching. The value -1 means Icmp type matching is not enabled.
INT tMacFilterParamsEtherType	1.3.6.1.4.1.6527.3.1.2.21.4.1.14	INTEGER	read-create	Ethertype for this policy MAC filter entry. Use -1 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to Ethernet_II.
INT tMacFilterParamsSnapOui	1.3.6.1.4.1.6527.3.1.2.21.4.1.20	INTEGER	read-create	MAC SNAP OUI to match. The values zero(2) and nonZero(3) specify what to match. Matching can be disabled by the use of the value off(1). This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2SNAP.
INT tMacFilterParamsSnapPid	1.3.6.1.4.1.6527.3.1.2.21.4.1.19	INTEGER	read-create	MAC SNAP PID to match for this policy MAC filter entry. use -1 to disable matching by this criteria. This object has no significance if object tMacFilterParamsFrameType is not set to 802dot2SNAP.
Integer32 (10)
I32 tFilterRSTInt32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.10	Integer32	read-create	The value tFilterRSTRespType is 'integer32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
I32 tFilterRSTLastInt32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.17	Integer32	read-only	The value tFilterRSTLastType is 'integer32'.
I32 tFilterRSTLastPrioChange	1.3.6.1.4.1.6527.3.1.2.21.12.1.24	Integer32	read-only	If the last action on the operational state of the destination i.e. tFilterRSTLastAction is 'enable', tFilterRSTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'.
I32 tFilterRSTNextRespIndex	1.3.6.1.4.1.6527.3.1.2.21.12.1.25	Integer32	read-only	The value of tFilterRSTNextRespIndex indicates the next response index to be used while creating a row in the tFilterRedirectSNMPRespTable. The value of '-1' means that the maximum number of return values for this OID are already configured.
I32 tFilterRSTRespId	1.3.6.1.4.1.6527.3.1.2.21.13.1.1	Integer32	not-accessible	tFilterRSTRespId holds the response value received from the destination.
I32 tFilterRUTLastPrioChange	1.3.6.1.4.1.6527.3.1.2.21.14.1.13	Integer32	read-only	If the last action on the operational state of the destination i.e. tFilterRUTLastAction is 'enable', tFilterRUTLastPrioChange maintains the impact that the last test probe made on the operational priority of the destination. In other cases, this object has no significance and hence should be holding the value '0'.
I32 tIPFilterSubInsertHighWmark	1.3.6.1.4.1.6527.3.1.2.21.1.1.10	Integer32	read-create	The value of the object tIPFilterSubInsertHighWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be raised by the agent.
I32 tIPFilterSubInsertLowWmark	1.3.6.1.4.1.6527.3.1.2.21.1.1.11	Integer32	read-create	The value of the object tIPFilterSubInsertLowWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be cleared by the agent.
I32 tIPv6FilterSubInsertHighWmark	1.3.6.1.4.1.6527.3.1.2.21.18.1.10	Integer32	read-create	The value of the object tIPv6FilterSubInsertHighWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be raised by the agent. The value 0 indicates that no alarm will be generated.
I32 tIPv6FilterSubInsertLowWmark	1.3.6.1.4.1.6527.3.1.2.21.18.1.11	Integer32	read-create	The value of the object tIPv6FilterSubInsertLowWmark specifies the utilization of the filter ranges for filter entry insertion, at which a table full alarm will be cleared by the agent.
IpAddress (11)
IP tAutoIPFilterEntrySourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.17.1.2	IpAddress	not-accessible	tAutoIPFilterEntrySourceIpAddr specifies the source ip-address and also serves as the secondary index to this table. This object is obsoleted in release 3.0.
IP tFilterRedirectDest	1.3.6.1.4.1.6527.3.1.2.21.11.1.1	IpAddress	not-accessible	tFilterRedirectDest holds the IP address of the destination entry.
IP tFilterRPActiveDest	1.3.6.1.4.1.6527.3.1.2.21.10.1.5	IpAddress	read-only	tFilterRPActiveDest indicates the IP address of the active destination. A value of 0 indicates that there is currently no active destination.
IP tFilterRSTIpAddressVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.12	IpAddress	read-create	The value tFilterRSTRespType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTOctetStringVal column. This field cannot be modified after creation. Any change attempts will be silently discarded.
IP tFilterRSTLastIpAddressVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.19	IpAddress	read-only	The value tFilterRSTLastType is 'ipAddress'. Although this seems to be unfriendly for IPv6, we have to recognize that there are a number of older MIBs that do contain an IPv4 format address, known as IpAddress. IPv6 addresses are represented using TAddress or InetAddress, and so the underlying datatype is OCTET STRING, and their value would be stored in the tFilterRSTLastOctetStringVal column.
IP tIPFilterParamsActiveDest	1.3.6.1.4.1.6527.3.1.2.21.2.1.40	IpAddress	read-only	tIPFilterParamsActiveDest indicates the IP address of the active destination for this IP filter. A value of 0 indicates that there is currently no active destination.
IP tIPFilterParamsDestinationIpAddr	1.3.6.1.4.1.6527.3.1.2.21.2.1.13	IpAddress	read-create	IP address to match the destination-ip of the packet.
IP tIPFilterParamsDestIpFullMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.49	IpAddress	read-create	If different from 0, the object tIPFilterParamsDestIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, no matching is done on the Destination Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsDestIpFullMask then the value of tIPFilterParamsDestinationIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsDestinationIpMask will be set to 0.
IP tIPFilterParamsForwardNH	1.3.6.1.4.1.6527.3.1.2.21.2.1.6	IpAddress	read-create	The ip-address of the nexthop to which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
IP tIPFilterParamsSourceIpAddr	1.3.6.1.4.1.6527.3.1.2.21.2.1.11	IpAddress	read-create	IP address to match the source-ip of the packet.
IP tIPFilterParamsSrcIpFullMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.48	IpAddress	read-create	If different from 0, the object tIPFilterParamsSrcIpFullMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, no matching is done on the Source Ip address. This object should contain consecutive ones and zeros. Both a regular and an inverse mask is allowed (i.e. the sequence of consecutive ones can appear at the front or at the end of the mask). If a regular mask is specified for tIPFilterParamsSrcIpFullMask then the value of tIPFilterParamsSourceIpMask will be changed to reflect this value. If an inverse is specified, the value of tIPFilterParamsSourceIpMask will be set to 0.
IpAddressPrefixLength (3)
ADR tAutoIPFilterEntrySourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.17.1.3	IpAddressPrefixLength	read-only	The value of tAutoIPFilterEntrySourceIpMask indicates the number of bits to be matched in the source ip-address. This object is obsoleted in release 3.0.
ADR tIPFilterParamsDestinationIpMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.14	IpAddressPrefixLength	read-create	If different from 0, the object tIPFilterParamsDestinationIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received Destination IP address to match the tIPFilterParamsDestinationIpAddr. If the value of tIPFilterParamsDestinationIpMask is 0, and the value of tIPFilterParamsDestIpFullMask is non zero then the value of tIPFilterParamsDestIpFullMask is used as mask. If the value of tIPFilterParamsDestinationIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsDestIpFullMask. If both tIPFilterParamsDestinationIpMask and tIPFilterParamsDestIpFullMask are set to 0, not matching is done on the Destination Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsDestIpFullMask will be set to reflect this same mask.
ADR tIPFilterParamsSourceIpMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.12	IpAddressPrefixLength	read-create	If different from 0, the object tIPFilterParamsSourceIpMask specifies the IP Mask value for this policy IP Filter entry. The mask is ANDed with the received source IP address to match the tIPFilterParamsSourceIpAddr. If the value of tIPFilterParamsSourceIpMask is 0, and the value of tIPFilterParamsSrcIpFullMask is non zero then the value of tIPFilterParamsSrcIpFullMask is used as mask. If the value of tIPFilterParamsSourceIpMask is non zero, it will be equal to the mask expressed the object tIPFilterParamsSrcIpFullMask. If both tIPFilterParamsSourceIpMask and tIPFilterParamsSrcIpFullMask are set to 0, not matching is done on the source Ip address. If a value is specified for this object, then the value of the object tIPFilterParamsSrcIpFullMask will be set to reflect this same mask.
MacAddress (8)
MAC tLiMacFilterParamsDstMAC	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.8	MacAddress	read-create	The object tLiMacFilterParamsDstMAC specifies the destination MAC to match for this LI MAC filter entry.
MAC tLiMacFilterParamsDstMACMask	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.9	MacAddress	read-create	The object tLiMacFilterParamsDstMACMask specifies the destination MAC mask value for this LI MAC filter match entry. The mask is ANDed with the MAC to match tLiMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tLiMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria. If set to all zero, the value of tLiMacFilterParamsDstMAC will bet set to all zero by the system, and any attept to change this value will be ignored.
MAC tLiMacFilterParamsSrcMAC	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.6	MacAddress	read-create	The object tLiMacFilterParamsSrcMAC specifies the source MAC address to match for this LI MAC filter entry.
MAC tLiMacFilterParamsSrcMACMask	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.7	MacAddress	read-create	The object tLiMacFilterParamsSrcMACMask specifies the source MAC mask value for this LI MAC filter match entry. The mask is ANDed with the MAC to match tLiMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. A one bit means match this bit with tLiMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criterium. If set to all zero, the value of tLiMacFilterParamsSrcMAC will bet set to all zero by the system, and any attept to change this value will be ignored.
MAC tMacFilterParamsDstMAC	1.3.6.1.4.1.6527.3.1.2.21.4.1.10	MacAddress	read-create	Destination MAC mask value for this policy MAC filter entry.
MAC tMacFilterParamsDstMACMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.11	MacAddress	read-create	Destination MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsDstMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsDstMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria.
MAC tMacFilterParamsSrcMAC	1.3.6.1.4.1.6527.3.1.2.21.4.1.8	MacAddress	read-create	Source MAC to match for this policy MAC filter entry.
MAC tMacFilterParamsSrcMACMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.9	MacAddress	read-create	Source MAC mask value for this policy MAC filter entry. The mask is ANDed with the MAC to match tMacFilterParamsSrcMAC. A zero bit means ignore this bit, do not match. a one bit means match this bit with tMacFilterParamsSrcMAC. Use the value 00-00-00-00-00-00 to disable this filter criteria.
OBJECT IDENTIFIER (5)
OID tFilterRSTLastOID	1.3.6.1.4.1.6527.3.1.2.21.12.1.12	OBJECT IDENTIFIER	read-only	The object tFilterRSTLastOID holds the OID received in the response.
OID tFilterRSTLastOidVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.20	OBJECT IDENTIFIER	read-only	The value tFilterRSTLastType is 'objectId'.
OID tFilterRSTOID	1.3.6.1.4.1.6527.3.1.2.21.12.1.3	OBJECT IDENTIFIER	read-create	tFilterRSTOID stores the OID of the object to be fetched from the destination. The value of this object can only be changed if the object tFilterRSTCommunity is changed at the same time.
OID tFilterRSTOidVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.13	OBJECT IDENTIFIER	read-create	The response value if tFilterRSTRespType is set to 'objectId'. This field cannot be modified after creation. Any change attempts will be silently discarded.
OID tFilterRSTRespOID	1.3.6.1.4.1.6527.3.1.2.21.13.1.5	OBJECT IDENTIFIER	read-create	The object tFilterRSTRespOID holds the OID to be received in the response. This field cannot be modified after creation. Any change attempts will be silently discarded.
OCTET STRING (4)
OCT tDhcpFilterParamsOptionValue	1.3.6.1.4.1.6527.3.1.2.21.24.1.7	OCTET STRING	read-create	The value of the object tDhcpFilterParamsOptionValue specifies the matching pattern for the filtered DHCP option. This object is mandatory at creation time. A zero length value is only allowed when the value of tDhcpFilterParamsOptionMatch is present(1) or absent(2).
OCT tFilterRSTLastOctetStringVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.18	OCTET STRING	read-only	The value tFilterRSTLastType is 'octetString'.
OCT tFilterRSTOctetStringVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.11	OCTET STRING	read-create	The value tFilterRSTRespType is 'octetString'. This field cannot be modified after creation. Any change attempts will be silently discarded.
OCT tFltrFLowSpecNLRI	1.3.6.1.4.1.6527.3.1.2.21.8.10	OCTET STRING	accessible-for-notify	The value of the object tFltrFLowSpecNLRI contains at most the first 30 octets of the NLRI causing the problem.
Opaque (2)
OPA tFilterRSTLastOpaqueVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.22	Opaque	read-only	The value tFilterRSTLastType is 'opaque'.
OPA tFilterRSTOpaqueVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.15	Opaque	read-create	The value tFilterRSTRespType is 'opaque'. This field cannot be modified after creation. Any change attempts will be silently discarded.
QTagFullRange (2)
QTA tMacFilterParamsInnerTagMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.36	QTagFullRange	read-create	The value of tMacFilterParamsInnerTagMask is applied as a mask to VID of the inner VLAN tag of the packet prior to comparing it with tMacFilterParamsInnerTagValue. The inner tag is the second tag in the packet that is carried transparently through the service (the second tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'.
QTA tMacFilterParamsOuterTagMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.38	QTagFullRange	read-create	The value of tMacFilterParamsOuterTagMask is applied as a mask to VID of the outer VLAN tag of the packet prior to comparing it with tMacFilterParamsOuterTagValue. The outer tag is the first tag in the packet that is carried transparently through the service (the first tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'.
QTagFullRangeOrNone (2)
QTA tMacFilterParamsInnerTagValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.35	QTagFullRangeOrNone	read-create	The value of tMacFilterParamsInnerTagValue specifies the value to match against the VID of the second VLAN tag in the packet that is carried transparently through the service (the second vlan tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'. The (default) value of '-1' indicates no inner VLAN tag matching will be performed.
QTA tMacFilterParamsOuterTagValue	1.3.6.1.4.1.6527.3.1.2.21.4.1.37	QTagFullRangeOrNone	read-create	The value of tMacFilterParamsOuterTagValue specifies the value to match against the VID of the first VLAN tag in the packet that is carried transparently through the service (the first vlan tag after the service delimiting tags). This object can only be set if tMacFilterType is set to 'vid(3)'. The (default) value of '-1' indicates no outer VLAN tag matching will be performed.
RowPointer (1)
NUM tFilterParmRow	1.3.6.1.4.1.6527.3.1.2.21.8.2	RowPointer	accessible-for-notify	The value of the object tFilterParmRow indicates the OID of the row status of the applicable filter parameter table. This can be a row from either one of the following tables: - tIPFilterParamsTable; - tMacFilterParamsTable; or - tIPv6FilterParamsTable
RowStatus (26)
ROW tDhcpFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.24.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tDhcpFilterParamsTable.
ROW tDhcpFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.22.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tDhcpFilterTable.
ROW tFilterLogRowStatus	1.3.6.1.4.1.6527.3.1.2.21.5.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tFilterLogTable.
ROW tFilterPrefixListEntryRowStatus	1.3.6.1.4.1.6527.3.1.2.21.35.1.4	RowStatus	read-create	The object tFilterPrefixListEntryRowStatus specifies the status of this row.
ROW tFilterPrefixListRowStatus	1.3.6.1.4.1.6527.3.1.2.21.33.1.3	RowStatus	read-create	The object tFilterPrefixListRowStatus specifies the status of this row.
ROW tFilterRDRowStatus	1.3.6.1.4.1.6527.3.1.2.21.11.1.2	RowStatus	read-create	tFilterRDRowStatus allows entries to be created and deleted in the tFilterRedirectDestTable.
ROW tFilterRPRowStatus	1.3.6.1.4.1.6527.3.1.2.21.10.1.2	RowStatus	read-create	tFilterRPRowStatus allows entries to be created and deleted in the tFilterRedirectPolicyTable.
ROW tFilterRPTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.16.1.1	RowStatus	read-create	This object allows tests to be created and deleted in the tFilterRedirectPingTestTable.
ROW tFilterRSTRespRowStatus	1.3.6.1.4.1.6527.3.1.2.21.13.1.2	RowStatus	read-create	This object allows response strings to be specified for a specific test and the change it will cause to the priority of the destination.
ROW tFilterRSTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.12.1.2	RowStatus	read-create	tFilterRSTRowStatus allows tests to be created and deleted in the tFilterRedirectSNMPTestTable.
ROW tFilterRUTRespRowStatus	1.3.6.1.4.1.6527.3.1.2.21.15.1.3	RowStatus	read-create	tFilterRUTRespRowStatus allows the mapping of a range of return codes returned from a specific test to the change it will cause to the priority of the destination.
ROW tFilterRUTRowStatus	1.3.6.1.4.1.6527.3.1.2.21.14.1.2	RowStatus	read-create	tFilterRUTRowStatus allows tests to be created and deleted in the tFilterRedirectURLTestTable.
ROW tIpFilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.28.1.2	RowStatus	read-only	This value of the object tIpFilterNameRowStatus specifies the status of this row.
ROW tIPFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.2.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPFilterParamsTable.
ROW tIPFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.1.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPFilterTable.
ROW tIpv6FilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.30.1.2	RowStatus	read-only	This value of the object tIpv6FilterNameRowStatus specifies the status of this row.
ROW tIPv6FilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.19.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tIPv6FilterParamsTable.
ROW tIPv6FilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.18.1.2	RowStatus	read-create	The value of the object tIPv6FilterRowStatus specifies the status of the IPv6 filter. The object allows entries to be created and deleted in the tIPv6FilterTable.
ROW tLiFilterAssociationRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.2	RowStatus	read-create	The object tLiFilterAssociationRowStatus specifies the status of this row.
ROW tLiFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.3	RowStatus	read-create	The object tLiFilterRowStatus specifies the status of this row.
ROW tLiMacFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.2	RowStatus	read-create	The object tLiMacFilterParamsRowStatus specifies the status of this row.
ROW tLiReservedBlockFltrRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.4	RowStatus	read-create	The object tLiReservedBlockFltrRowStatus specifies the status of this row.
ROW tLiReservedBlockRowStatus	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.2	RowStatus	read-create	The object tLiReservedBlockRowStatus specifies the status of this row.
ROW tMacFilterNameRowStatus	1.3.6.1.4.1.6527.3.1.2.21.26.1.2	RowStatus	read-only	This value of the object tMacFilterNameRowStatus specifies the status of this row.
ROW tMacFilterParamsRowStatus	1.3.6.1.4.1.6527.3.1.2.21.4.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tMacFilterParamsTable.
ROW tMacFilterRowStatus	1.3.6.1.4.1.6527.3.1.2.21.3.1.2	RowStatus	read-create	This object allows entries to be created and deleted in the tMacFilterTable.
SdpBindId (3)
SDP tIPFilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.2.1.44	SdpBindId	read-create	tIPFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSapEncapVal have a zero value.
SDP tIPv6FilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.19.1.42	SdpBindId	read-create	tIPv6FilterParamsFwdSdpBind specifies the sdp bind id of the destination for this filter entry. The value '0' indicates that there is currently no SDP binding defined. A value different from '0' can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSapEncapVal have value 0.
SDP tMacFilterParamsFwdSdpBind	1.3.6.1.4.1.6527.3.1.2.21.4.1.27	SdpBindId	read-create	tMacFilterParamsFwdSdpBind specifies the sdp bibd identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SDP binding defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the objects tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSapEncapVal have a zero value.
ServiceAccessPoint (4)
NUM tMacFilterParamsDsap	1.3.6.1.4.1.6527.3.1.2.21.4.1.15	ServiceAccessPoint	read-create	MAC DSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified together to the default value.
NUM tMacFilterParamsDsapMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.16	ServiceAccessPoint	read-create	MAC DSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsDsap and tMacFilterParamsDsapMask need to be modified together to the default value.
NUM tMacFilterParamsSsap	1.3.6.1.4.1.6527.3.1.2.21.4.1.17	ServiceAccessPoint	read-create	MAC SSAP to match for this policy MAC filter entry. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified together to the default value.
NUM tMacFilterParamsSsapMask	1.3.6.1.4.1.6527.3.1.2.21.4.1.18	ServiceAccessPoint	read-create	MAC SSAP mask for this policy MAC filter entry. use 0 to disable matching by this criteria. This object has no significance if the object tMacFilterParamsFrameType is not set to 802dot2LLC. In order to reset the value to the default value, both objects tMacFilterParamsSsap and tMacFilterParamsSsapMask need to be modified together to the default value.
SvcISID (2)
SVC tMacFilterParamsHighISID	1.3.6.1.4.1.6527.3.1.2.21.4.1.34	SvcISID	read-create	The value of tMacFilterParamsHighISID specifies the highest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The default value of -1 indicates no ISID matching will be performed. The value of this field can be equal to but not higher than the value of the tMacFilterParamsLowISID field. Changing the value of this field might also change the value of tMacFilterParamsLowISID: A value of -1 will change the value of tMacFilterParamsLowISID to -1. Changing the value of this field from -1 to any other value will change the value of tMacFilterParamsLowISID to this same value. Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only be set if tMacFilterType is set to 'isid(1)'.
SVC tMacFilterParamsLowISID	1.3.6.1.4.1.6527.3.1.2.21.4.1.33	SvcISID	read-create	The value of tMacFilterParamsLowISID specifies the lowest value of the 24 bit (0..16777215) service instance identifier for this service that matches this entry. The default value of -1 indicates no ISID matching will be performed. The value of this field can be equal to but not lower than the value of the tMacFilterParamsHighISID field. Changing the value of this field might also change the value of tMacFilterParamsHighISID: A value of -1 will change the value of tMacFilterParamsHighISID to -1. Changing the value of this field from -1 to any other value will change the value of tMacFilterParamsHighISID to this same value. Note that tMacFilterParamsLowISID and tMacFilterParamsHighISID can only be set if tMacFilterType is set to 'isid(1)'.
TAnyFilterID (4)
TAN tIPFilterId	1.3.6.1.4.1.6527.3.1.2.21.1.1.1	TAnyFilterID	not-accessible	Uniquely identifies an ip filter. User configured filters can only have values between (1..65535). All other values are reserved for system generated filters.
TAN tIpFilterNameId	1.3.6.1.4.1.6527.3.1.2.21.28.1.1	TAnyFilterID	read-only	The value of the object tIpFilterNameId specifies the filter name associated with this IP filter.
TAN tIpv6FilterNameId	1.3.6.1.4.1.6527.3.1.2.21.30.1.1	TAnyFilterID	read-only	The value of the object tIpv6FilterNameId specifies the filter name associated with this IPv6 filter.
TAN tMacFilterNameId	1.3.6.1.4.1.6527.3.1.2.21.26.1.1	TAnyFilterID	read-only	The value of the object tMacFilterNameId specifies the filter name associated with this MAC filter.
TDhcpFilterAction (1)
TDH tDhcpFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.24.1.6	TDhcpFilterAction	read-create	The action to take for DHCP host creation requests that match this filter entry. The value none(1) specifies normal host creation behaviour, the value bypass-host-creation(2) specifies to bypass host creation, the value drop(3) specifies to drop the DHCP message.
TDHCPFilterID (1)
TDH tDhcpFilterId	1.3.6.1.4.1.6527.3.1.2.21.22.1.1	TDHCPFilterID	not-accessible	Uniquely identifies a mac filter as configures on this system.
TDhcpFilterMatch (1)
TDH tDhcpFilterParamsOptionMatch	1.3.6.1.4.1.6527.3.1.2.21.24.1.5	TDhcpFilterMatch	read-create	The value of tDhcpFilterParamsOptionMatch specifies the criteria that the DHCP option must match to trigger this filter entry. The value present(1) specifies that the DHCP option must be present, the value absent(2) specifies that the DHCP option must be absent. In these cases tDhcpFilterParamsOptionValue will be reset to an empty string. A value string(3), string-exact(4), string-invert(5), string-exact-invert(6), hex(7), hex-exact(8), hex-invert(9) or hex-exact-invert(10) requires an octet string to be present in tDhcpFilterParamsOptionValue to match against.
TDSCPFilterActionValue (4)
TDS tIPFilterParamsRemarkDSCP	1.3.6.1.4.1.6527.3.1.2.21.2.1.8	TDSCPFilterActionValue	read-create	The DSCP value that should be remarked in case a packet hits this filter entry.
TDS tIPFilterParamsRemarkDSCPMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.9	TDSCPFilterActionValue	read-create	tIPFilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value.
TDS tIPv6FilterParamsRemarkDSCP	1.3.6.1.4.1.6527.3.1.2.21.19.1.8	TDSCPFilterActionValue	read-create	The DSCP value that should be remarked in case a packet hits this filter entry.
TDS tIPv6FilterParamsRemarkDSCPMask	1.3.6.1.4.1.6527.3.1.2.21.19.1.9	TDSCPFilterActionValue	read-create	tIPv6FilterParamsRemarkDSCPMask specifies the care bits while remarking with the DSCP value.
TDSCPNameOrEmpty (2)
TDS tIPFilterParamsDSCP	1.3.6.1.4.1.6527.3.1.2.21.2.1.22	TDSCPNameOrEmpty	read-create	DSCP to be matched on the packet.
TDS tIPv6FilterParamsDSCP	1.3.6.1.4.1.6527.3.1.2.21.19.1.22	TDSCPNameOrEmpty	read-create	DSCP to be matched on the packet.
TEntryId (5)
TEN tDhcpFilterParamsId	1.3.6.1.4.1.6527.3.1.2.21.24.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every DHCP filter can have multiple entries, therefore every DHCP filter entry is identified by the tDhcpFilterId and tDhcpFilterParamsId.
TEN tIPFilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.2.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every ip filter can have multiple entries, therefore every ip filter entry is identified by the tIPFilterId and tIPFilterParamsIndex.
TEN tIPv6FilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.19.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every IPv6 filter can have multiple entries, therefore every IPv6 filter entry is identified by the tIPv6FilterId and tIPv6FilterParamsIndex.
TEN tLiMacFilterParamsId	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.1	TEntryId	not-accessible	The object tLiMacFilterParamsId indicates the secondary index for this entry. Every LI MAC filter may have multiple match entries, therefore every LI MAC filter match entry is identified by the tLiFilterName and tLiMacFilterParamsId.
TEN tMacFilterParamsIndex	1.3.6.1.4.1.6527.3.1.2.21.4.1.1	TEntryId	not-accessible	This is the secondary index for the entry. Every mac filter can have multiple entries, therefore every mac filter entry is identified by the tMacFilterId and tMacFilterParamsIndex.
TEntryIdOrZero (10)
TEN tIPFilterCreditCntrlInsertPt	1.3.6.1.4.1.6527.3.1.2.21.1.1.8	TEntryIdOrZero	read-create	The value of tIPFilterCreditCntrlInsertPt specifies at what place the filter entries received from Credit Control for a particular subscriber host will be inserted in the filter. No regular entries, nor Radius provided entries can be configured in this range. The value 0 means that no Credit Control provided filter entries can be inserted in the filter. If tIPFilterCreditCntrlInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterCreditCntrlInsertSize	1.3.6.1.4.1.6527.3.1.2.21.1.1.9	TEntryIdOrZero	read-create	The value of tIPFilterCreditCntrlInsertSize specifies how many filter entries received from Credit Control can be inserted in the filter. If tIPFilterCreditCntrlInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterRadiusInsertPt	1.3.6.1.4.1.6527.3.1.2.21.1.1.6	TEntryIdOrZero	read-create	The value of tIPFilterRadiusInsertPt specifies at what place the filter entries received from Radius will be inserted in the filter. No regular entries, nor Credit Control provided entries can be configured in this range. The value 0 means that no Radius provided filter entries can be inserted in the filter. If tIPFilterRadiusInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPFilterRadiusInsertSize	1.3.6.1.4.1.6527.3.1.2.21.1.1.7	TEntryIdOrZero	read-create	The value of tIPFilterRadiusInsertSize specifies how many filter entries received from Radius for subscriber hosts can be inserted in the filter. If tIPFilterRadiusInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterCreditCntrlInsertPt	1.3.6.1.4.1.6527.3.1.2.21.18.1.8	TEntryIdOrZero	read-create	The value of tIPv6FilterCreditCntrlInsertPt specifies at what place the filter entries received from Credit Control for a particular subscriber host will be inserted in the filter. No regular entries, nor Radius provided entries can be configured in this range. The value 0 means that no Credit Control provided filter entries can be inserted in the filter. If tIPv6FilterCreditCntrlInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterCreditCntrlInsertSize	1.3.6.1.4.1.6527.3.1.2.21.18.1.9	TEntryIdOrZero	read-create	The value of tIPv6FilterCreditCntrlInsertSize specifies how many filter entries received from Credit Control can be inserted in the filter. If tIPv6FilterCreditCntrlInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterRadiusInsertPt	1.3.6.1.4.1.6527.3.1.2.21.18.1.6	TEntryIdOrZero	read-create	The value of tIPv6FilterRadiusInsertPt specifies at what place the filter entries received from Radius will be inserted in the filter. No regular entries, nor Credit Control provided entries can be configured in this range. The value 0 means that no Radius provided filter entries can be inserted in the filter. If tIPv6FilterRadiusInsertSize is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tIPv6FilterRadiusInsertSize	1.3.6.1.4.1.6527.3.1.2.21.18.1.7	TEntryIdOrZero	read-create	The value of tIPv6FilterRadiusInsertSize specifies how many filter entries received from Radius for subscriber hosts can be inserted in the filter. If tIPv6FilterRadiusInsertPt is set to 0, then this object will be put to 0 as well. Any change attempts will be silently discarded in this case.
TEN tLiReservedBlockSize	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.6	TEntryIdOrZero	read-create	The object tLiReservedBlockSize specifies the size of the LI reserved block. If set to '0' no block is reserved. In this case the value of the object tLiReservedBlockStart will be set to '0' by the system.
TEN tLiReservedBlockStart	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.5	TEntryIdOrZero	read-create	The object tLiReservedBlockStart specifies the starting entry of the LI reserved block. If set to '0' no block is reserved. In this case the value of the object tLiReservedBlockSize will be set to '0' by the system.
TFilterAction (3)
TFI tIPFilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.1.1.5	TFilterAction	read-create	The action to take for packets that do not match any filter entries. The only allowed values for this field are drop(1) and forward(2).
TFI tIPv6FilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.18.1.5	TFilterAction	read-create	The value of the object tIPv6FilterDefaultAction specifies the action to be taken for packets that do not match any of the filter entries. The only allowed values for this field are drop(1) and forward(2).
TFI tMacFilterDefaultAction	1.3.6.1.4.1.6527.3.1.2.21.3.1.5	TFilterAction	read-create	The action to take for packets that do not match any filter entries. The only allowed values for this field are drop(1) and forward(2).
TFilterActionOrDefault (3)
TFI tIPFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.2.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter.
TFI tIPv6FilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.19.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. The value nat(5) is not supported.
TFI tMacFilterParamsAction	1.3.6.1.4.1.6527.3.1.2.21.4.1.5	TFilterActionOrDefault	read-create	The action to take for packets that match this filter entry. The value default(3) specifies this entry to inherit the behavior defined as the default for the filter. The value nat(5) is not allowed.
TFilterID (6)
TFI tAutoIPFilterId	1.3.6.1.4.1.6527.3.1.2.21.17.1.1	TFilterID	not-accessible	tAutoIPFilterId serves as a primary index and uniquely identifies an application point such as a routed interface or a SAP. This object is obsoleted in release 3.0.
TFI tFilterId	1.3.6.1.4.1.6527.3.1.2.21.8.4	TFilterID	accessible-for-notify	The value of the object tFilterId, together with the object tFilterType uniquely defines the filter for which this notification is generated.
TFI tFltrGrpInsrtdEntriesFilterId	1.3.6.1.4.1.6527.3.1.2.21.20.2	TFilterID	read-write	tFltrGrpInsrtdEntriesFilterId specifies for which filter the inserted entries must be grouped.
TFI tLiFilterAssociationFltrId	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.1	TFilterID	not-accessible	The object tLiFilterAssociationFltrId indicates the id of the normal filter in the association described by this entry.
TFI tLiReservedBlockFltrIdEnd	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.3	TFilterID	not-accessible	The object tLiReservedBlockFltrIdEnd specifies the ID of the last filter to apply an LI block reservation. In this release, tLiReservedBlockFltrIdEnd must be equal to tLiReservedBlockFltrIdStart.
TFI tLiReservedBlockFltrIdStart	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.2	TFilterID	not-accessible	The object tLiReservedBlockFltrIdStart specifies the ID of the first filter to apply an LI block reservation. In this release, tLiReservedBlockFltrIdStart must be equal to tLiReservedBlockFltrIdEnd.
TFilterLogDestination (1)
TFI tFilterLogDestination	1.3.6.1.4.1.6527.3.1.2.21.5.1.3	TFilterLogDestination	read-create	This object specifies the destination of the log.
TFilterLogId (4)
TFI tFilterLogId	1.3.6.1.4.1.6527.3.1.2.21.5.1.1	TFilterLogId	not-accessible	This is the index for the entry. An entry cannot be created with an id of 0.
TFI tIPFilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.2.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
TFI tIPv6FilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.19.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
TFI tMacFilterParamsLogId	1.3.6.1.4.1.6527.3.1.2.21.4.1.3	TFilterLogId	read-create	This object specifies the log to use for packets that match this entry. The value zero indicates that logging is disabled.
TFilterLogSummaryCriterium (1)
TFI tFilterLogSummaryCrit1	1.3.6.1.4.1.6527.3.1.2.21.5.1.11	TFilterLogSummaryCriterium	read-create	The value of tFilterLogSummaryCrit1 specifies how filter log entries will be summarized. This field is only meaningful if the object tFilterLogSummaryEnabled is set to true.
TFilterSubInsSpaceOwner (2)
TFI tFilterSubInsSpaceOwner	1.3.6.1.4.1.6527.3.1.2.21.8.6	TFilterSubInsSpaceOwner	accessible-for-notify	The value of the object tFilterSubInsSpaceOwner, specifies for which application, capable of inserting filter entries, this notification is generated.
TFI tFltrGrpInsrtdEntriesApplication	1.3.6.1.4.1.6527.3.1.2.21.20.3	TFilterSubInsSpaceOwner	read-write	tFltrGrpInsrtdEntriesApplication specifies for which application the the inserted entries must be grouped.
TFilterType (4)
TFI tFilterType	1.3.6.1.4.1.6527.3.1.2.21.8.5	TFilterType	accessible-for-notify	The value of the object tFilterType, together with the object tFilterId uniquely defines the filter for which this notification is generated.
TFI tFltrGrpInsrtdEntriesFilterType	1.3.6.1.4.1.6527.3.1.2.21.20.1	TFilterType	read-write	tFltrGrpInsrtdEntriesFilterType specifies the type of the filter referred to by tFltrGrpInsrtdEntriesFilterId. Inserted entries can only occur in 'fltrtypeselIp' and 'fltrtypeselIpv6'
TFI tLiFilterType	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.1	TFilterType	not-accessible	The object tLiFilterType specifies the type of this LI filter. In this release only MAC filters are supported.
TFI tLiReservedBlockFltrType	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.1	TFilterType	not-accessible	The object tLiReservedBlockFltrType specifies the type of filter this LI block reservation applies to. In this release only MAC filters are supported.
TFltrPrefixListType (1)
TFL tFilterPrefixListType	1.3.6.1.4.1.6527.3.1.2.21.33.1.1	TFltrPrefixListType	not-accessible	The object TFltrPrefixListType specifies the type of prefix list for the prefix list tFilterPrefixListName.
TFrameType (2)
TFR tLiMacFilterParamsFrameType	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.5	TFrameType	read-create	The object tLiMacFilterParamsFrameType specifies the type of mac frame for which we are defining this match criterium.
TFR tMacFilterParamsFrameType	1.3.6.1.4.1.6527.3.1.2.21.4.1.6	TFrameType	read-create	The type of mac frame for which we are defining this match criteria. For filter entries in a Mac filter of type tMacFilterType = dot1q or tMacFilterType qinq the default value for this object is set to ethernetII (3), and no changes are allowed. In all other cases the default value is set to e802dot3 (0)
TimeStamp (27)
TIM tDhcpFilterLastChanged	1.3.6.1.4.1.6527.3.1.2.21.22.1.3	TimeStamp	read-only	The value of tDhcpFilterLastChanged indicates the timestamp of last change to this row in tDhcpFilterTable.
TIM tDhcpFilterParamsLastChanged	1.3.6.1.4.1.6527.3.1.2.21.24.1.3	TimeStamp	read-only	The value of tDhcpFilterParamsLastChanged indicates the timestamp of last change to this row in tDhcpFilterParamsTable.
TIM tDhcpFilterParamsTblLastChanged	1.3.6.1.4.1.6527.3.1.2.21.23	TimeStamp	read-only	The value of tDhcpFilterParamsTblLastChanged indicates the sysUpTime at the time of the last modification to tDhcpFilterParamsTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tDhcpFilterTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.21	TimeStamp	read-only	The value of tDhcpFilterTableLastChanged indicates the sysUpTime at the time of the last modification to tDhcpFilterTable by adding, deleting an entry or change to a writable object in the table. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tFilterDomainLastChanged	1.3.6.1.4.1.6527.3.1.2.21.9.1	TimeStamp	read-only	timestamp of last change to tFilterObjects.
TIM tFilterPrefixListEntryTblLstChg	1.3.6.1.4.1.6527.3.1.2.21.34	TimeStamp	read-only	The object tFilterPrefixListEntryTblLstChg indicates the sysUpTime at the time of the last modification of tFilterPrefixListEntryTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains the value zero.
TIM tFilterPrefixListLastChanged	1.3.6.1.4.1.6527.3.1.2.21.33.1.4	TimeStamp	read-only	The object tFilterPrefixListLastChanged indicates the sysUpTime at the time of the last modification of this row. If no changes were made to the row since the last re-initialization of the local network management subsystem, then this object contains the value zero.
TIM tFilterPrefixListTableLstChng	1.3.6.1.4.1.6527.3.1.2.21.32	TimeStamp	read-only	The object tFilterPrefixListTableLstChng indicates the sysUpTime at the time of the last modification of tFilterPrefixListTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, this object contains the value zero.
TIM tFilterRPTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.16.1.7	TimeStamp	read-only	tFilterRPTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
TIM tFilterRSTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.12.1.11	TimeStamp	read-only	tFilterRSTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
TIM tFilterRUTLastActionTime	1.3.6.1.4.1.6527.3.1.2.21.14.1.10	TimeStamp	read-only	tFilterRUTLastActionTime maintains the time stamp when this test received a response for a probe sent out.
TIM tIpFilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.28.1.3	TimeStamp	read-only	The value of tIpFilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tIpFilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.27	TimeStamp	read-only	The value of tIpFilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tIpFilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tIpv6FilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.30.1.3	TimeStamp	read-only	The value of tIpv6FilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tIpv6FilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.29	TimeStamp	read-only	The value of tIpv6FilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tIpv6FilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiFilterAssociationLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.8.1.3	TimeStamp	read-only	The object tLiFilterAssociationLastChg indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiFilterAssociationTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.7	TimeStamp	read-only	The object tLiFilterAssociationTableLastChg indicates the sysUpTime at the time of the last modification of tLiFilterTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiFilterLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.4	TimeStamp	read-only	The object tLiFilterLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiFilterTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.5	TimeStamp	read-only	The object tLiFilterTableLastChanged indicates the sysUpTime at the time of the last modification of tLiFilterTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiMacFilterParamsLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.3	TimeStamp	read-only	The object tLiMacFilterParamsLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiMacFilterParamsTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.9	TimeStamp	read-only	The object tLiMacFilterParamsTableLastChg indicates the sysUpTime at the time of the last modification of tLiMacFilterParamsTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiReservedBlockFltrLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.4.1.5	TimeStamp	read-only	The object tLiReservedBlockFltrLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiReservedBlockFltrTableLastChg	1.3.6.1.4.1.6527.3.1.2.21.31.3	TimeStamp	read-only	The value of tLiReservedBlockFltrTableLastChg indicates the sysUpTime at the time of the last modification of tLiReservedBlockFltrTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiReservedBlockLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.3	TimeStamp	read-only	The object tLiReservedBlockLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tLiReservedBlockTableLastChanged	1.3.6.1.4.1.6527.3.1.2.21.31.1	TimeStamp	read-only	The object tLiReservedBlockTableLastChanged indicates the sysUpTime at the time of the last modification of tLiReservedBlockTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMacFilterNameLastChanged	1.3.6.1.4.1.6527.3.1.2.21.26.1.3	TimeStamp	read-only	The value of tMacFilterNameLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TIM tMacFilterNameTableLastChgd	1.3.6.1.4.1.6527.3.1.2.21.25	TimeStamp	read-only	The value of tMacFilterNameTableLastChgd indicates the sysUpTime at the time of the last modification of tMacFilterNameTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value.
TimeTicks (2)
TIK tFilterRSTLastTimeTicksVal	1.3.6.1.4.1.6527.3.1.2.21.12.1.16	TimeTicks	read-only	The value tFilterRSTLastType is 'timeTicks'.
TIK tFilterRSTTimeTicksVal	1.3.6.1.4.1.6527.3.1.2.21.13.1.9	TimeTicks	read-create	The value tFilterRSTRespType is 'timeTicks'. This field cannot be modified after creation. Any change attempts will be silently discarded.
TIPFilterID (1)
TIP tIPv6FilterId	1.3.6.1.4.1.6527.3.1.2.21.18.1.1	TIPFilterID	not-accessible	The value of the object tIPv6FilterId uniquely identifies a IPv6 filter on this system.
TIpOption (2)
TIP tIPFilterParamsIpOptionMask	1.3.6.1.4.1.6527.3.1.2.21.2.1.27	TIpOption	read-create	Mask is ANDed with the ip-option before being compared to tIPFilterParamsIpOptionValue.
TIP tIPFilterParamsIpOptionValue	1.3.6.1.4.1.6527.3.1.2.21.2.1.26	TIpOption	read-create	The value of the specific ip-option to match.
TIpProtocol (2)
TIP tIPFilterParamsProtocol	1.3.6.1.4.1.6527.3.1.2.21.2.1.15	TIpProtocol	read-create	IP protocol to match. set to -1 to disable matching IP protocol. If the protocol is changed the protocol specific parameters are reset. For instance if protocol is changed from TCP to UDP, then the objects tIPFilterParamsTcpSyn and tIPFilterParamsTcpAck will be turned off.
TIP tIPv6FilterParamsNextHeader	1.3.6.1.4.1.6527.3.1.2.21.19.1.15	TIpProtocol	read-create	IPv6 next header to match. set to -1 to disable matching IPv6 next header. If the next header is changed the next header specific parameters are reset. For instance if next header is changed from TCP to UDP, then the objects tIPv6FilterParamsTcpSyn and tIPv6FilterParamsTcpAck will be turned off. Because the match criteria only pertains to the last next-header, the following values are not accepted: 0, 43, 44, 50, 51, and 60.
TItemDescription (14)
TIT tDhcpFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.22.1.4	TItemDescription	read-create	User-provided description for this filter.
TIT tFilterLogDescription	1.3.6.1.4.1.6527.3.1.2.21.5.1.4	TItemDescription	read-create	User-provided description for this filter log entry.
TIT tFilterPrefixListDescription	1.3.6.1.4.1.6527.3.1.2.21.33.1.5	TItemDescription	read-create	The object tFilterPrefixListDescription specifies a description for this row.
TIT tFilterRDDescription	1.3.6.1.4.1.6527.3.1.2.21.11.1.3	TItemDescription	read-create	User-provided description for this destination is maintained in the object tFilterRDDescription.
TIT tFilterRPDescription	1.3.6.1.4.1.6527.3.1.2.21.10.1.3	TItemDescription	read-create	User-provided description for this redirect policy is maintained in the object tFilterRPDescription.
TIT tIPFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.1.1.4	TItemDescription	read-create	User-provided description for this filter.
TIT tIPFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.2.1.4	TItemDescription	read-create	User-provided description for this filter entry.
TIT tIPv6FilterDescription	1.3.6.1.4.1.6527.3.1.2.21.18.1.4	TItemDescription	read-create	The value of the object tIPv6FilterDescription specifies a user-provided description for this filter.
TIT tIPv6FilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.19.1.4	TItemDescription	read-create	User-provided description for this filter entry.
TIT tLiFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.5	TItemDescription	read-create	The object tLiFilterDescription specifies a description for this LI MAC filter.
TIT tLiMacFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.31.10.1.4	TItemDescription	read-create	The object tLiMacFilterParamsDescription specifies a description for this entry.
TIT tLiReservedBlockDescription	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.4	TItemDescription	read-create	The object tLiReservedBlockDescription specifies a description for this LI reserved block.
TIT tMacFilterDescription	1.3.6.1.4.1.6527.3.1.2.21.3.1.4	TItemDescription	read-create	User-provided description for this filter.
TIT tMacFilterParamsDescription	1.3.6.1.4.1.6527.3.1.2.21.4.1.4	TItemDescription	read-create	User-provided description for this filter entry.
TItemMatch (8)
TIT tIPFilterParamsFragment	1.3.6.1.4.1.6527.3.1.2.21.2.1.24	TItemMatch	read-create	If enabled, this object matches fragmented/unfragmented packets as per the value of the object.
TIT tIPFilterParamsMultipleOption	1.3.6.1.4.1.6527.3.1.2.21.2.1.28	TItemMatch	read-create	If enabled, matches multiple options as per the value of the object.
TIT tIPFilterParamsOptionPresent	1.3.6.1.4.1.6527.3.1.2.21.2.1.25	TItemMatch	read-create	If enabled, this object matches packets if they have options present or not as per the value of the object.
TIT tIPFilterParamsSrcRouteOption	1.3.6.1.4.1.6527.3.1.2.21.2.1.53	TItemMatch	read-create	tIPFilterParamsSrcRouteOption specifies, when enabled, that this filter should match if a (strict or loose) source route option is present/not present at any location within the IP header, as per the value of this object.
TIT tIPFilterParamsTcpAck	1.3.6.1.4.1.6527.3.1.2.21.2.1.30	TItemMatch	read-create	If Enabled, matches a TCP Ack as per value of the object.
TIT tIPFilterParamsTcpSyn	1.3.6.1.4.1.6527.3.1.2.21.2.1.29	TItemMatch	read-create	If Enabled, matches a TCP Syn as per value of the object.
TIT tIPv6FilterParamsTcpAck	1.3.6.1.4.1.6527.3.1.2.21.19.1.24	TItemMatch	read-create	If Enabled, matches a TCP Ack as per value of the object.
TIT tIPv6FilterParamsTcpSyn	1.3.6.1.4.1.6527.3.1.2.21.19.1.23	TItemMatch	read-create	If Enabled, matches a TCP Syn as per value of the object.
TItemScope (3)
TIT tIPFilterScope	1.3.6.1.4.1.6527.3.1.2.21.1.1.3	TItemScope	read-create	This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
TIT tIPv6FilterScope	1.3.6.1.4.1.6527.3.1.2.21.18.1.3	TItemScope	read-create	The value of the object tIPv6FilterScope specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
TIT tMacFilterScope	1.3.6.1.4.1.6527.3.1.2.21.3.1.3	TItemScope	read-create	This object specifies the scope of this filter definition. If defined as exclusive(1), this filter can be instantiated only once as compared to the multiple instances that the filter can have if defined as template(2).
TLNamedItemOrEmpty (3)
TLN tIpFilterName	1.3.6.1.4.1.6527.3.1.2.21.1.1.14	TLNamedItemOrEmpty	read-create	The value of tIpFilterName specifies the name to associate with this filter.
TLN tIpv6FilterName	1.3.6.1.4.1.6527.3.1.2.21.18.1.14	TLNamedItemOrEmpty	read-create	The value of tIpv6FilterName specifies the name to associate with this filter.
TLN tMacFilterName	1.3.6.1.4.1.6527.3.1.2.21.3.1.7	TLNamedItemOrEmpty	read-create	The value of tMacFilterName specifies the name to associate with this filter.
TMACFilterID (1)
TMA tMacFilterId	1.3.6.1.4.1.6527.3.1.2.21.3.1.1	TMACFilterID	not-accessible	Uniquely identifies a mac filter as configures on this system.
TMacFilterType (1)
TMA tMacFilterType	1.3.6.1.4.1.6527.3.1.2.21.3.1.6	TMacFilterType	read-create	tMacFilterType specifies which type of entries this mac filter can contain. If tMacFilterType is set to 'normal(1)', all match criteria are accepted except the criteria mentioned below that belong to type isid(2) and vid(3). if tMacFilterType is set to 'isid(2)' the only accepted match criteria for the filter entries are: - tMacFilterParamsLowISID - tMacFilterParamsHighISID If tMacFilterType is set to vid(3) the only accepted match criteria for the filter entries are: - tMacFilterParamsInnerTagValue - tMacFilterParamsInnerTagMask - tMacFilterParamsOuterTagValue - tMacFilterParamsOuterTagMask tMacFilterType can only be changed if the filter is not applied and has no entries.
TmnxAdminState (2)
TMN tFilterRDAdminState	1.3.6.1.4.1.6527.3.1.2.21.11.1.6	TmnxAdminState	read-create	tFilterRDAdminState maintains the configured state of the destination. If the admin state is 'outOfService', the tests for this destination will not be conducted.
TMN tFilterRPAdminState	1.3.6.1.4.1.6527.3.1.2.21.10.1.4	TmnxAdminState	read-create	tFilterRPAdminState holds the admin state of the policy. If the admin state is 'outOfService', the tests will not be conducted.
TmnxEncapVal (3)
TMN tIPFilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.2.1.43	TmnxEncapVal	read-create	tIPFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this IP filter entry. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tIPFilterParamsFwdSapPortId and tIPFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
TMN tIPv6FilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.19.1.41	TmnxEncapVal	read-create	tIPv6FilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this filter entry. A value different from 0 can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPv6FilterParamsFwdSdpBind has value '0'. The value 0 indicates that either 1) the sap encapsulation value is not specified when tIPv6FilterParamsFwdSapPortId and tIPv6FilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
TMN tMacFilterParamsFwdSapEncapVal	1.3.6.1.4.1.6527.3.1.2.21.4.1.26	TmnxEncapVal	read-create	tMacFilterParamsFwdSapEncapVal specifies the sap port encap value of the destination SAP for this Mac filter entry. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, the tMacFilterParamsFwdSapPortId object has a non zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value. A value of 0 indicates that either 1) the sap encapsulation value is not specified when tMacFilterParamsFwdSapPortId and tMacFilterParamsFwdSvcId have valid values; or 2) that there is no SAP destination.
TmnxOperState (1)
TMN tFilterRDOperState	1.3.6.1.4.1.6527.3.1.2.21.11.1.7	TmnxOperState	read-only	The value of tFilterRDOperState indicates the operational state of the destination.
TmnxPortID (3)
TMN tIPFilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.2.1.42	TmnxPortID	read-create	tIPFilterParamsFwdSapPortId specifies the sap port identity of the destination for this IP filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the value of the tIPFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPFilterParamsFwdSdpBind has a zero value.
TMN tIPv6FilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.19.1.40	TmnxPortID	read-create	tIPv6FilterParamsFwdSapPortId specifies the sap port id of the destination for this filter entry. The value 0 indicates that there is no SAP destination defined. A value different from 0 can only be specified if the value of the tIPv6FilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tIPv6FilterParamsFwdSdpBind is '0'.
TMN tMacFilterParamsFwdSapPortId	1.3.6.1.4.1.6527.3.1.2.21.4.1.25	TmnxPortID	read-create	tMacFilterParamsFwdSapPortId specifies the sap port identity of the destination for this Mac filter entry. A value of 0 indicates that there is currently no SAP destination defined. A value different from 0 can only be specified if the tMacFilterParamsFwdSvcId object also has a non-zero value, and if the the value of the tMacFilterParamsAction object of this entry is 'forward'. In addition a non-zero value can only be given if the object tMacFilterParamsFwdSdpBind has a zero value.
TmnxServId (3)
TMN tIPFilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.2.1.41	TmnxServId	read-only	tIPFilterParamsFwdSvcId indicates the service id of the destination for this IP filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination.
TMN tIPv6FilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.19.1.39	TmnxServId	read-only	tIPv6FilterParamsFwdSvcId indicates the service id of the destination for this filter entry. The value 0 indicates that there is no active SAP or SDP destination.
TMN tMacFilterParamsFwdSvcId	1.3.6.1.4.1.6527.3.1.2.21.4.1.24	TmnxServId	read-only	tMacFilterParamsFwdSvcId indicates the service id of the destination for this Mac filter entry. A value of 0 indicates that there is currently no active SAP or SDP destination.
TmnxVRtrIDOrZero (1)
TMN tIPFilterParamsFwdRtrId	1.3.6.1.4.1.6527.3.1.2.21.2.1.52	TmnxVRtrIDOrZero	read-create	tIPFilterParamsFwdRtrId specifies, if different from '0', the router id of the into which the packet should be forwarded if it hits this filter entry. The action of this entry should be 'forward' in such a case.
TNamedItem (6)
TNA tFilterPrefixListName	1.3.6.1.4.1.6527.3.1.2.21.33.1.2	TNamedItem	not-accessible	The object tFilterPrefixListName specifies the name given to this prefix list.
TNA tFilterRedirectPolicy	1.3.6.1.4.1.6527.3.1.2.21.10.1.1	TNamedItem	not-accessible	tFilterRedirectPolicy uniquely identifies each redirect policy configured on this system.
TNA tFilterRedirectSNMPTest	1.3.6.1.4.1.6527.3.1.2.21.12.1.1	TNamedItem	not-accessible	tFilterRedirectSNMPTest specifies the name of the SNMP test.
TNA tFilterRedirectURLTest	1.3.6.1.4.1.6527.3.1.2.21.14.1.1	TNamedItem	not-accessible	tFilterRedirectURLTest holds the name of the URL test.
TNA tLiFilterName	1.3.6.1.4.1.6527.3.1.2.21.31.6.1.2	TNamedItem	not-accessible	The object tLiFilterName indicates the unique name of this LI MAC Filter.
TNA tLiReservedBlockName	1.3.6.1.4.1.6527.3.1.2.21.31.2.1.1	TNamedItem	not-accessible	The object tLiReservedBlockName uniquely identifies an LI reserved block.
TNamedItemOrEmpty (7)
TNA tIPFilterParamsDstIpPrefixList	1.3.6.1.4.1.6527.3.1.2.21.2.1.55	TNamedItemOrEmpty	read-create	The value of the object tIPFilterParamsDstIpPrefixList specifies the ip-prefix-list to be used as match criterion for the destination ip address. If the value of this object is empty the values of the objects tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask will be used as src-ip match criterion. The value specified for this object must correspond to a prefix-list defined in tFilterPrefixListTable. When set to a non zero value, the value of the objects tIPFilterParamsDestinationIpAddr and tIPFilterParamsDestinationIpMask will set to their default values. The value of this object will be set to its default value by the system if a new (non default) value is provided for any of the objects tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask. An attempt to set tIPFilterParamsDstIpPrefixList to a non-default value in combination with setting any of tIPFilterParamsDestinationIpAddr or tIPFilterParamsDestinationIpMask to (a) non-default value(s) is rejected by the system. Also, setting both tIPFilterParamsDstIpPrefixList and tIPFilterParamsSrcIpPrefixList to non-default values is rejected by the system
TNA tIPFilterParamsForwardRedPlcy	1.3.6.1.4.1.6527.3.1.2.21.2.1.39	TNamedItemOrEmpty	read-create	tIPFilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop.
TNA tIPFilterParamsSrcIpPrefixList	1.3.6.1.4.1.6527.3.1.2.21.2.1.54	TNamedItemOrEmpty	read-create	The value of the object tIPFilterParamsSrcIpPrefixList specifies the ip-prefix-list to be used as match criterion for the source ip address. If the value of this object is empty then the values of the objects tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask will be used as src-ip match criterion. The value specified for this object must correspond to a prefix-list defined in tFilterPrefixListTable. When set to a non zero value, the value of the objects tIPFilterParamsSourceIpAddr and tIPFilterParamsSourceIpMask will set to their default values. The value of this object will be set to its default value by the system if a new (non default) value is provided for any of the objects tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask. An attempt to set tIPFilterParamsSrcIpPrefixList to a non-default value in combination with setting any of tIPFilterParamsSourceIpAddr or tIPFilterParamsSourceIpMask to (a) non-default value(s) is rejected by the system. Also, setting both tIPFilterParamsSrcIpPrefixList and tIPFilterParamsDstIpPrefixList to non-default values is rejected by the system
TNA tIPFilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.2.1.45	TNamedItemOrEmpty	read-create	tIPFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TNA tIPv6FilterParamsForwardRedPlcy	1.3.6.1.4.1.6527.3.1.2.21.19.1.33	TNamedItemOrEmpty	read-create	tIPv6FilterParamsForwardRedPlcy specifies the redirect policy to be used to determine the nexthop.
TNA tIPv6FilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.19.1.35	TNamedItemOrEmpty	read-create	tIPv6FilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TNA tMacFilterParamsTimeRangeName	1.3.6.1.4.1.6527.3.1.2.21.4.1.28	TNamedItemOrEmpty	read-create	tMacFilterParamsTimeRangeName specifies the tmnxTimeRangeEntry to be associated with this filter entry. A value for this object can only be specified during row creation, and cannot be altered lateron. Also, a value is accepted only if the tmnxTimeRangeEntry is defined in the TIMETRA-SCHEDULER-MIB::tmnxTimeRangeTable.tTimeRangeName.
TruthValue (13)
T/F tFilterLogEnabled	1.3.6.1.4.1.6527.3.1.2.21.5.1.9	TruthValue	read-create
T/F tFilterLogStopOnFull	1.3.6.1.4.1.6527.3.1.2.21.5.1.8	TruthValue	read-create
T/F tFilterLogSummaryEnabled	1.3.6.1.4.1.6527.3.1.2.21.5.1.10	TruthValue	read-create	The value of tFilterLogSummaryEnabled specifies whether or not summarization of filter log entries is performed. Summarization is only allowed in case tFilterLogDestination is set to syslog.
T/F tFltrGrpInsrtdEntriesExecute	1.3.6.1.4.1.6527.3.1.2.21.20.7	TruthValue	read-write	Setting the object tFltrGrpInsrtdEntriesExecute to 'true' will cause the system to attempt to execute te grouping command as specified by the other MIB objects in the tFilterGroupInsertedEntries mibgroup. When read the value will always indicate 'false'. The result of the command can be found in tFltrGrpInsrtdEntriesResult and tFltrGrpInsrtdEntriesFeedback
T/F tIPFilterParamsCflowdIfSample	1.3.6.1.4.1.6527.3.1.2.21.2.1.34	TruthValue	read-create	When tIPFilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPFilterParamsCflowdSample	1.3.6.1.4.1.6527.3.1.2.21.2.1.33	TruthValue	read-create	When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IP filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPFilterParamsForwardNHIndirect	1.3.6.1.4.1.6527.3.1.2.21.2.1.7	TruthValue	read-create	tIPFilterParamsForwardNHIndirect specifies if the nexthop is directly/ indirectly reachable.
T/F tIPFilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.2.1.38	TruthValue	read-only	tIPFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
T/F tIPv6FilterParamsCflowdIfSample	1.3.6.1.4.1.6527.3.1.2.21.19.1.28	TruthValue	read-create	When tIPv6FilterParamsCflowdIfSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPv6FilterParamsCflowdSample	1.3.6.1.4.1.6527.3.1.2.21.19.1.27	TruthValue	read-create	When tIPFilterParamsCflowdSample has a value of 'true', Cflowd sampling and analysis is performed on those packet streams where this filter has been applied. Only packets matching this IPv6 filter entry are subjected to Cflowd sampling and analysis. A Cflowd profile controls the sampling and analysis of data flows through the router.
T/F tIPv6FilterParamsForwardNHIndirect	1.3.6.1.4.1.6527.3.1.2.21.19.1.7	TruthValue	read-create	tIPv6FilterParamsForwardNHIndirect specifies if the nexthop is directly or indirectly reachable.
T/F tIPv6FilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.19.1.32	TruthValue	read-only	tIPv6FilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
T/F tMacFilterParamsLogInstantiated	1.3.6.1.4.1.6527.3.1.2.21.4.1.23	TruthValue	read-only	tMacFilterParamsLogInstantiated indicates if the filter log for this filter entry has been instantiated or not.
TTcpUdpPort (8)
TTC tIPFilterParamsDestPortValue1	1.3.6.1.4.1.6527.3.1.2.21.2.1.19	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsDestPortOperator.
TTC tIPFilterParamsDestPortValue2	1.3.6.1.4.1.6527.3.1.2.21.2.1.20	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsDestPortOperator.
TTC tIPFilterParamsSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.21.2.1.16	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator.
TTC tIPFilterParamsSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.21.2.1.17	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPFilterParamsSourcePortOperator.
TTC tIPv6FilterParamsDestPortValue1	1.3.6.1.4.1.6527.3.1.2.21.19.1.19	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator.
TTC tIPv6FilterParamsDestPortValue2	1.3.6.1.4.1.6527.3.1.2.21.19.1.20	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsDestPortOperator.
TTC tIPv6FilterParamsSourcePortValue1	1.3.6.1.4.1.6527.3.1.2.21.19.1.16	TTcpUdpPort	read-create	TCP/UDP port value1. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator.
TTC tIPv6FilterParamsSourcePortValue2	1.3.6.1.4.1.6527.3.1.2.21.19.1.17	TTcpUdpPort	read-create	TCP/UDP port value2. The value of this object is used as per the description for tIPv6FilterParamsSourcePortOperator.
TTcpUdpPortOperator (4)
TTC tIPFilterParamsDestPortOperator	1.3.6.1.4.1.6527.3.1.2.21.2.1.21	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsDestPortOperator is used as described in TTcpUdpPortOperator.
TTC tIPFilterParamsSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.21.2.1.18	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used. The value of these latter 2 objects and tIPFilterParamsSourcePortOperator is used as described in TTcpUdpPortOperator.
TTC tIPv6FilterParamsDestPortOperator	1.3.6.1.4.1.6527.3.1.2.21.19.1.21	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsDestPortValue1 and tIPFilterParamsDestPortValue2 are to be used.
TTC tIPv6FilterParamsSourcePortOperator	1.3.6.1.4.1.6527.3.1.2.21.19.1.18	TTcpUdpPortOperator	read-create	The operator specifies the manner in which tIPFilterParamsSourcePortValue1 and tIPFilterParamsSourcePortValue2 are to be used.
TTimeRangeState (3)
TTI tIPFilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.2.1.46	TTimeRangeState	read-only	tIPFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
TTI tIPv6FilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.19.1.36	TTimeRangeState	read-only	tIPv6FilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tIPv6FilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tIPv6FilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
TTI tMacFilterParamsTimeRangeState	1.3.6.1.4.1.6527.3.1.2.21.4.1.29	TTimeRangeState	read-only	tMacFilterParamsTimeRangeState indicates whether or not the entry is currently in effect. - timeRangeNotApplic: no time range is applicable for this entry. - timeRangeNotActive: A time range is defined in tMacFilterParamsTimeRangeName, but is not active at this moment. Consequently the filter entry is not installed. - timeRangeActive. A time range is defined in tMacFilterParamsTimeRangeName, and is activated successfully. - timeRangeActiveDownloadFailed: A time range is defined in tMacFilterParamsTimeRangeName, and is activated, but the corresponding filter entry could not be installed due to resource problems.
Unsigned32 (32)
U32 tFilterLogFileId	1.3.6.1.4.1.6527.3.1.2.21.5.1.7	Unsigned32	read-create	The object tFilterLogFileId specifies the File Id to be used as destination. If tFilterLogDestination is not 'file(3)' then the object tFilterLogFileId Imaintains a value of '0', and any change attempts will be silently discarded.
U32 tFilterLogMaxNumEntries	1.3.6.1.4.1.6527.3.1.2.21.5.1.5	Unsigned32	read-create	The object tFilterLogMaxNumEntries specifies the maximum number of entries that the log can store. If tFilterLogDestination is not 'memory(1)' then the object tFilterLogMaxNumEntries maintains a value of '0', and Any change attempts will be silently discarded.
U32 tFilterLogSysLogId	1.3.6.1.4.1.6527.3.1.2.21.5.1.6	Unsigned32	read-create	The object tFilterLogSysLogId specifies the syslog Id to be used as destination. If tFilterLogDestination is not 'sysLog(2)' then the object tFilterLogSysLogId maintains a value of '0', and any change attempts will be silently discarded.
U32 tFilterRDAdminPriority	1.3.6.1.4.1.6527.3.1.2.21.11.1.4	Unsigned32	read-create	tFilterRDAdminPriority holds the configured base priority for the destination.
U32 tFilterRDOperPriority	1.3.6.1.4.1.6527.3.1.2.21.11.1.5	Unsigned32	read-only	tFilterRDAdminPriority maintains the operational value of the priority for this destination. The highest operational priority across multiple destinations is used as the preferred destination. A value of '0' is maintained if the destination if tFilterRDOperState is 'outOfService'.
U32 tFilterRedirectURLHighRespCode	1.3.6.1.4.1.6527.3.1.2.21.15.1.2	Unsigned32	not-accessible	tFilterRedirectURLHighRespCode specifies the higher return code of the range specified by this entry.
U32 tFilterRedirectURLLowRespCode	1.3.6.1.4.1.6527.3.1.2.21.15.1.1	Unsigned32	not-accessible	tFilterRedirectURLLowRespCode specifies the lower return code of the range specified by this entry.
U32 tFilterRPTDropCount	1.3.6.1.4.1.6527.3.1.2.21.16.1.4	Unsigned32	read-create	The value of tFilterRPTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRPTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.16.1.5	Unsigned32	read-create	The value of tFilterRPTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRPTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.16.1.6	Unsigned32	read-only	The value of tFilterRPTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
U32 tFilterRPTInterval	1.3.6.1.4.1.6527.3.1.2.21.16.1.2	Unsigned32	read-create	The value of tFilterRPTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
U32 tFilterRPTTimeout	1.3.6.1.4.1.6527.3.1.2.21.16.1.3	Unsigned32	read-create	The value of tFilterRPTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
U32 tFilterRSTDropCount	1.3.6.1.4.1.6527.3.1.2.21.12.1.8	Unsigned32	read-create	The value of tFilterRSTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRSTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.12.1.9	Unsigned32	read-create	The value of tFilterRSTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRSTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.12.1.10	Unsigned32	read-only	The value of tFilterRSTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
U32 tFilterRSTInterval	1.3.6.1.4.1.6527.3.1.2.21.12.1.6	Unsigned32	read-create	The value of tFilterRSTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
U32 tFilterRSTLastUnsigned32Val	1.3.6.1.4.1.6527.3.1.2.21.12.1.15	Unsigned32	read-only	The value tFilterRSTLastType is 'unsigned32'.
U32 tFilterRSTRespPrioChange	1.3.6.1.4.1.6527.3.1.2.21.13.1.4	Unsigned32	read-create	tFilterRSTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRSTRespAction is either 'increase' or 'decrease'. If tFilterRSTRespAction is 'disable', this field will be set to 0. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRSTTimeout	1.3.6.1.4.1.6527.3.1.2.21.12.1.7	Unsigned32	read-create	The value of tFilterRSTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
U32 tFilterRSTUnsigned32Val	1.3.6.1.4.1.6527.3.1.2.21.13.1.8	Unsigned32	read-create	The value tFilterRSTRespType is 'unsigned32'. This field cannot be modified after creation. Any change attempts will be silently discarded.
U32 tFilterRUTDropCount	1.3.6.1.4.1.6527.3.1.2.21.14.1.7	Unsigned32	read-create	The value of tFilterRUTDropCount specifies the number of consecutive requests that must fail for the destination to declared unreachable.
U32 tFilterRUTHoldDown	1.3.6.1.4.1.6527.3.1.2.21.14.1.8	Unsigned32	read-create	The value of tFilterRUTHoldDown specifies the amount of time in seconds that the system should be held down if any of the test has marked it unreachable.
U32 tFilterRUTHoldDownRemain	1.3.6.1.4.1.6527.3.1.2.21.14.1.9	Unsigned32	read-only	The value of tFilterRUTHoldDownRemain indicates the amount of time in seconds that the system will remain in held down state before being used again.
U32 tFilterRUTInterval	1.3.6.1.4.1.6527.3.1.2.21.14.1.5	Unsigned32	read-create	The value of tFilterRUTInterval specifies the amount of time in seconds between consecutive requests sent to the far end host.
U32 tFilterRUTLastRetCode	1.3.6.1.4.1.6527.3.1.2.21.14.1.11	Unsigned32	read-only	tFilterRUTLastRetCode holds the return code received in the last response.
U32 tFilterRUTRespPrioChange	1.3.6.1.4.1.6527.3.1.2.21.15.1.5	Unsigned32	read-create	tFilterRUTRespPrioChange specifies the amount of change to be made to the priority of the destination if the tFilterRUTRespAction is either 'increase' or 'decrease'. If tFilterRUTRespAction is 'disable', tFilterRUTRespPrioChange will be forced to 0. Any change to tFilterRUTRespPrioChange will be silently discarded in this case. Setting the object tFilterRUTRespPrioChange to 0 will cause the value of tFilterRUTRespAction to be set to 'disable'.
U32 tFilterRUTTimeout	1.3.6.1.4.1.6527.3.1.2.21.14.1.6	Unsigned32	read-create	The value of tFilterRUTTimeout specifies the amount of time in seconds that is allowed for receiving a response from the far end host. If a reply is not received within this time the far end host is considered unresponsive.
U32 tFltrFlowSpecVrtrId	1.3.6.1.4.1.6527.3.1.2.21.8.11	Unsigned32	accessible-for-notify	The value of the object tFltrFlowSpecVrtrId indicates the virtual router Id to which the NLRI belongs.
U32 tIpFilterCreditCntrlNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.1.1.12	Unsigned32	read-only	The value of the object tIpFilterCreditCntrlNbrInsertd indicates how many filter entries are currently inserted in the filter on request the credit control application.
U32 tIpFilterRadiusNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.1.1.13	Unsigned32	read-only	The value of the object tIpFilterRadiusNbrInsertd indicates how many filter entries are currently inserted in the filter on request the RADIUS application.
U32 tIpv6FilterCreditCntrlNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.18.1.12	Unsigned32	read-only	The value of the object tIpv6FilterCreditCntrlNbrInsertd indicates how many filter entries are currently inserted in the filter on request the credit control application.
U32 tIpv6FilterRadiusNbrInsertd	1.3.6.1.4.1.6527.3.1.2.21.18.1.13	Unsigned32	read-only	The value of the object tIpv6FilterRadiusNbrInsertd indicates how many filter entries are currently inserted in the filter on request the RADIUS application.
No type (117)
tAutoIPFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.17.1		not-accessible	Defines an entry in the tAutoIPFilterEntryTable. Entries are created and deleted in this table by the system. Each entry provides information about a single active automatic filter entry. This entry is obsoleted in release 3.0.
tAutoIPFilterEntryTable	1.3.6.1.4.1.6527.3.1.2.21.17		not-accessible	Defines the Alcatel-Lucent SROS series automatic IP filters for providing, via SNMP, the capability of gathering information regarding the same. tAutoIPFilterEntryTable holds a list of all automatic filter entries being used for filtering. This table is obsoleted in release 3.0.
tDhcpFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.22.1		not-accessible	Information about a particular DHCP filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tDhcpFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.24.1		not-accessible	Information about a particular DHCP filter entry. Every DHCP filter can have zero or more DHCP filter match entries. A filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tDhcpFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.24		not-accessible	A table of all DHCP filter match entries for all DHCP filters.
tDhcpFilterTable	1.3.6.1.4.1.6527.3.1.2.21.22		not-accessible	Contains a list of all DHCP filters configured on this system.
tDhcpFilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.37			The group of objects supporting DHCP Filters on Alcatel 7x50 ESS/SR series systems 10.0 release.
tDhcpFilterV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.34			The group of objects supporting DHCP Filters on Alcatel 7x50 ESS/SR series systems 9.0 release.
tFilter7450V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.4			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R4.0.
tFilter7450V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.6			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0.
tFilter7450V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.8			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R5.0.
tFilter7450V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.10			The compliance statement for management of Filter features on Alcatel 7450 ESS series systems release R8.0.
tFilter7750V4v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.5			The compliance statement for management of Filter features on Alcatel 7750 SR series systems release R4.0.
tFilter77x0V5v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.7			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0.
tFilter77x0V6v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.9			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R5.0.
tFilter77x0V8v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.11			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R8.0.
tFilter7xxxV10v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.13			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R10.0.
tFilter7xxxV9v0Compliance	1.3.6.1.4.1.6527.3.1.1.21.1.12			The compliance statement for management of Filter features on Alcatel 77x0 SPR/SR series systems release R9.0.
NTF tFilterBgpFlowSpecProblem	1.3.6.1.4.1.6527.3.1.3.21.0.7			The tFilterBgpFlowSpecProblem notification is generated when a BGP flowspec NLRI is received in the filter module that cannot be treated - i.e. for which no filter entry is installed in the system, or when there is a problem inserting (new) or reshuffling (existing) flowspec or merged filter entries.
NTF tFilterEntryActivationFailed	1.3.6.1.4.1.6527.3.1.3.21.0.2			The tFilterEntryActivationFailed event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event is generated when this installation failed because of resource problems.
NTF tFilterEntryActivationRestored	1.3.6.1.4.1.6527.3.1.3.21.0.3			The tFilterEntryActivationRestored event can only be generated for entries that are controlled by a tmnxTimeRangeEntry. If the tmnxTimeRangeEntry becomes active the indicated entry must be installed. The event tFilterEntryActivationFailed is generated when this installation originally failed because of resources problems, The notification tFilterEntryActivationRestored is sent when either the time range associated with the filter is no longer active, or when the filter entry was installed due to the availability of new resources.
tFilterGroupInsertedEntries	1.3.6.1.4.1.6527.3.1.2.21.20
tFilterLiObjects	1.3.6.1.4.1.6527.3.1.2.21.31
tFilterLogEntry	1.3.6.1.4.1.6527.3.1.2.21.5.1		not-accessible	Information about a particular Filter Log entry.
tFilterLogGroup	1.3.6.1.4.1.6527.3.1.1.21.2.3			The group of objects supporting management of filter log objects on Alcatel-Lucent SROS series systems.
tFilterLogScalars	1.3.6.1.4.1.6527.3.1.2.21.6
tFilterLogTable	1.3.6.1.4.1.6527.3.1.2.21.5		not-accessible	A table of all filter logs.
tFilterLogV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.18			The group of objects supporting Filter Log Summarization on Alcatel 7x50 ESS/SR series systems 5.0 release.
tFilterMIBCompliances	1.3.6.1.4.1.6527.3.1.1.21.1
tFilterMIBConformance	1.3.6.1.4.1.6527.3.1.1.21
tFilterMIBGroups	1.3.6.1.4.1.6527.3.1.1.21.2
tFilterNameV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.36			The group of objects supporting management of filter-name objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjects	1.3.6.1.4.1.6527.3.1.2.21.8
tFilterNotificationObjGroup	1.3.6.1.4.1.6527.3.1.1.21.2.8			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.21			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.27			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotificationObjV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.33			The group of objects supporting management of filter notification objects on Alcatel-Lucent SROS series systems.
tFilterNotifications	1.3.6.1.4.1.6527.3.1.3.21.0
tFilterNotificationsGroup	1.3.6.1.4.1.6527.3.1.1.21.2.9			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterNotificationsPrefix	1.3.6.1.4.1.6527.3.1.3.21
tFilterNotificationsV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.28			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterNotificationsV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.32			The group of notifications supporting management of filter notifications on Alcatel-Lucent SROS series systems.
tFilterObjects	1.3.6.1.4.1.6527.3.1.2.21
tFilterPrefixListEntry	1.3.6.1.4.1.6527.3.1.2.21.33.1		not-accessible	An entry in the tFilterPrefixListTable.
tFilterPrefixListEntryEntry	1.3.6.1.4.1.6527.3.1.2.21.35.1		not-accessible	An entry in the tFilterPrefixListEntryTable.
tFilterPrefixListEntryTable	1.3.6.1.4.1.6527.3.1.2.21.35		not-accessible	The table tFilterPrefixListEntryTable contains an entry for each prefix defined in any prefix list defined in the filter area.
tFilterPrefixListTable	1.3.6.1.4.1.6527.3.1.2.21.33		not-accessible	The table tFilterPrefixListTable contains an entry for each prefix list defined in the filter area.
tFilterPrefixListV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.39			The group of objects supporting management of IP prefix lists in IP filters on Alcatel-Lucent SROS series systems 10.0 release.
tFilterRedirectDestEntry	1.3.6.1.4.1.6527.3.1.2.21.11.1		not-accessible	Information about a particular Redirect destination. Entries are created/deleted by user.
tFilterRedirectDestTable	1.3.6.1.4.1.6527.3.1.2.21.11		not-accessible	Contains a List of all redirect destinations configured on this system.
tFilterRedirectPingTestEntry	1.3.6.1.4.1.6527.3.1.2.21.16.1		not-accessible	Information about a specific Ping test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tFilterRedirectPingTestTable	1.3.6.1.4.1.6527.3.1.2.21.16		not-accessible	Contains a List of all redirect Ping tests configured on this system.
tFilterRedirectPolicyEntry	1.3.6.1.4.1.6527.3.1.2.21.10.1		not-accessible	Information about a particular redirect policy. Entries are created/deleted by user.
tFilterRedirectPolicyGroup	1.3.6.1.4.1.6527.3.1.1.21.2.4			The group of objects supporting management of filter redirect policy objects on Alcatel-Lucent SROS series systems.
tFilterRedirectPolicyTable	1.3.6.1.4.1.6527.3.1.2.21.10		not-accessible	Contains a List of all redirect policies configured on this system.
tFilterRedirectSNMPRespEntry	1.3.6.1.4.1.6527.3.1.2.21.13.1		not-accessible	Information about action to be taken for a specific destination when a specific response is received. Each row is created once and cannot be modified after creation. Any change attempts will be silently discarded.
tFilterRedirectSNMPRespTable	1.3.6.1.4.1.6527.3.1.2.21.13		not-accessible	Each row in this table holds the effect of the test on the destination for a specific return value. Each row is created once and cannot be modified after creation. Any change attempts will be silently discarded.
tFilterRedirectSNMPTestEntry	1.3.6.1.4.1.6527.3.1.2.21.12.1		not-accessible	Information about a specific SNMP test configured for a destination. Entries are created/deleted by user.
tFilterRedirectSNMPTestTable	1.3.6.1.4.1.6527.3.1.2.21.12		not-accessible	Contains a List of all redirect SNMP tests configured on this system.
tFilterRedirectURLRespEntry	1.3.6.1.4.1.6527.3.1.2.21.15.1		not-accessible	Information about action to be taken for a specific destination when a return value within the range specified between tFilterRedirectURLLowRespCode and tFilterRedirectURLHighRespCode is received.
tFilterRedirectURLRespTable	1.3.6.1.4.1.6527.3.1.2.21.15		not-accessible	Each row in this table holds the effect of the test on the destination for a range of return values.
tFilterRedirectURLTestEntry	1.3.6.1.4.1.6527.3.1.2.21.14.1		not-accessible	Information about a specific URL test configured for a destination. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tFilterRedirectURLTestTable	1.3.6.1.4.1.6527.3.1.2.21.14		not-accessible	Contains a List of all redirect snmp tests configured on this system.
tFilterScalarGroup	1.3.6.1.4.1.6527.3.1.1.21.2.7			The group of objects supporting management of filter scalar objects on Alcatel-Lucent SROS series systems.
NTF tFilterSubInsFltrEntryDropped	1.3.6.1.4.1.6527.3.1.3.21.0.6			The tFilterSubInsFltrEntryDropped notification is generated when a request to insert a filter entry was not successful.
NTF tFilterSubInsSpaceAlarmCleared	1.3.6.1.4.1.6527.3.1.3.21.0.5			The tFilterSubInsSpaceAlarmCleared notification is generated when the utilization of a filter entry range that was reserved for filter entry insertion dropped below to the configured low watermark for his filter.
NTF tFilterSubInsSpaceAlarmRaised	1.3.6.1.4.1.6527.3.1.3.21.0.4			The tFilterSubInsSpaceAlarmRaised notification is generated when the utilization of a filter entry range that was reserved for filter entry insertion increases to the configured high watermark for his filter
tFilterTimeStampObjects	1.3.6.1.4.1.6527.3.1.2.21.9
timetraFilterMIBModule	1.3.6.1.4.1.6527.1.1.3.21			This document is the SNMP MIB module to manage and provision Filter features on Alcatel-Lucent SROS systems. Copyright 2003-2012 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied 'as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
tIPFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.1.1		not-accessible	Information about a particular IP Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tIpFilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.28.1		not-accessible	Basic information about a specific IP filter name.
tIpFilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.28		not-accessible	A table that contains IP filter name information. Entries are created automatically by the system when tIpFilterName object is set for the IP filter.
tIPFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.2.1		not-accessible	Information about a particular IP Filter entry. Every IP Filter can have zero or more IP Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tIPFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.2		not-accessible	A table of all IP filter match entries for all IP filters.
NTF tIPFilterPBRPacketsDrop	1.3.6.1.4.1.6527.3.1.3.21.0.1			The tIPFilterPBRPacketsDrop event is generated either when the configuration of a forwarding action refers to an invalid/unconfigured next-hop or if the active interface goes down operationally in the process of active filtering.
tIPFilterTable	1.3.6.1.4.1.6527.3.1.2.21.1		not-accessible	Contains a List of all ip filters configured on this system.
tIPFilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.12			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 4.0 release.
tIPFilterV5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.17			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 5.0 release.
tIPFilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.22			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 6.0 release.
tIPFilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.25			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 8.0 release.
tIPFilterV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.31			The group of objects supporting IP Filters on Alcatel 7x50 ESS/SR series systems 9.0 release.
tIPv6FilterEntry	1.3.6.1.4.1.6527.3.1.2.21.18.1		not-accessible	Information about a particular IPv6 Filter entry. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tIpv6FilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.30.1		not-accessible	Basic information about a specific IPv6 filter name.
tIpv6FilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.30		not-accessible	A table that contains IPv6 filter name information. Entries are created automatically by the system when tIpv6FilterName object is set for the IPv6 filter.
tIPv6FilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.19.1		not-accessible	Information about a particular IPv6 Filter entry. Every IPv6 Filter can have zero or more IPv6 Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tIPv6FilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.19		not-accessible	A table of all IPv6 filter match entries for all IPv6 filters.
tIPv6FilterTable	1.3.6.1.4.1.6527.3.1.2.21.18		not-accessible	Contains a List of all IPv6 filters configured on this system.
tIPv6FilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.35			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPv6FilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.11			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPv6FilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.24			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tIPv6FilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.26			The group of objects supporting management of IPv6 filter objects on Alcatel-Lucent SROS series systems.
tLiFilterAssociationEntry	1.3.6.1.4.1.6527.3.1.2.21.31.8.1		not-accessible	An association between an LI filter and a normal filter.
tLiFilterAssociationTable	1.3.6.1.4.1.6527.3.1.2.21.31.8		not-accessible	The table tLiFilterAssociationTable contains information about the associations between LI filters and normal filters.
tLiFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.31.6.1		not-accessible	An LI MAC filter.
tLiFilterTable	1.3.6.1.4.1.6527.3.1.2.21.31.6		not-accessible	The table tLiFilterTable contains information about all LI MAC filters.
tLiFilterV10v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.38			The group of objects supporting management of LI filter entries on Alcatel-Lucent SROS series systems 10.0 release.
tLiMacFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.31.10.1		not-accessible	An LI MAC filter match entry.
tLiMacFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.31.10		not-accessible	The table tLiMacFilterParamsTable contains all LI MAC filter match entries for all LI MAC filters.
tLiReservedBlockEntry	1.3.6.1.4.1.6527.3.1.2.21.31.2.1		not-accessible	Information about an LI reserved block. This block can be associated with one or more filters to reserve a number of entries in those filters for LI.
tLiReservedBlockFltrEntry	1.3.6.1.4.1.6527.3.1.2.21.31.4.1		not-accessible	An association of a normal filter with an LI block reservation. In this release, only MAC filters are supported.
tLiReservedBlockFltrTable	1.3.6.1.4.1.6527.3.1.2.21.31.4		not-accessible	The table tLiReservedBlockFltrTable contains associations between normal filters and LI block reservations.
tLiReservedBlockTable	1.3.6.1.4.1.6527.3.1.2.21.31.2		not-accessible	The table tLiReservedBlockTable describes LI reserved blocks. In this release this table can have at most one entry.
tMacFilterEntry	1.3.6.1.4.1.6527.3.1.2.21.3.1		not-accessible	Information about a particular MAC Filter. Entries are created/deleted by user. Entries have a presumed StorageType of nonVolatile.
tMacFilterNameEntry	1.3.6.1.4.1.6527.3.1.2.21.26.1		not-accessible	Basic information about a specific MAC filter name.
tMacFilterNameTable	1.3.6.1.4.1.6527.3.1.2.21.26		not-accessible	A table that contains MAC filter name information. Entries are created automatically by the system when tMacFilterName object is set for the MAC filter.
tMacFilterParamsEntry	1.3.6.1.4.1.6527.3.1.2.21.4.1		not-accessible	Information about a particular MAC Filter entry. Every MAC Filter can have zero or more MAC Filter match entries. a filter entry with no match criteria set will match every packet, and the entry action will be taken. Entries are created/deleted by user. There is no StorageType object, entries have a presumed StorageType of nonVolatile.
tMacFilterParamsTable	1.3.6.1.4.1.6527.3.1.2.21.4		not-accessible	A table of all MAC filter match entries for all MAC filters.
tMacFilterTable	1.3.6.1.4.1.6527.3.1.2.21.3		not-accessible	Contains a List of all mac filters configured on this system.
tMacFilterV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.13			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 4.0 release.
tMacFilterV6v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.23			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 6.0 release.
tMacFilterV8v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.29			The group of objects supporting management of mac filter objects on Alcatel-Lucent SROS series systems 8.0 release.
tMacFilterVidFilteringV9v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.30			The group of objects supporting management of mac VID filtering objects on Alcatel-Lucent SROS series systems 9.0 release.
tmnxFilterObsoleteGroup	1.3.6.1.4.1.6527.3.1.1.21.2.15			The group of objects in TIMETRA-FILTER-MIB which are obsoleted.
tTodPolicies77450V5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.19			The group of objects supporting management of time of day policy related objects on Alcatel 7450 ESS series systems 5.0 release. This group was made obsolete for Alcatel SROS Release 9.0.
tTodPolicies77x0V5v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.20			The group of objects supporting management of time of day policy related objects on Alcatel 77x0 series systems 5.0 release.
tTodPoliciesV4v0Group	1.3.6.1.4.1.6527.3.1.1.21.2.14			The group of objects supporting management of time of day policy related objects on Alcatel-Lucent SROS series systems 4.0 release.
tToDPoliciesV5v0NotifyGroup	1.3.6.1.4.1.6527.3.1.1.21.2.16			The group of notifications generated by the time of time of day policy feature on Alcatel-Lucent SROS series systems 5.0 release.

RFC description

Vendor-private MIB for Nokia (formerly Timetra) packet filtering and access control list management.

Start monitoring Nokia/Alcatel-Lucent 7750 SR and related SR OS-based routers, entire product line (IP/MAC ACL filter policy status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download TIMETRA-FILTER-MIB

This MIB depends on

Related MIBs

What Is TIMETRA-FILTER-MIB?

What Can Be Monitored

Supported Devices

Monitoring Examples

RFC description