All MIBs › CISCOSB-QOS-CLI-MIB
Organization: Cisco Small Business
Last Updated: 2006-04-04
Category: Quality of Service, Vendor: RADLAN/Cisco SB
Description: Manages Cisco Small Business QoS CLI policy objects for traffic marking, queuing, and scheduling.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCOSB-QOS-CLI-MIB?
CISCOSB-QOS-CLI-MIB is a Cisco Small Business private MIB backing the CLI-driven QoS engine, covering traffic classification offsets, policers, queues, and associated statistics counters. It exposes configuration mode settings (basic vs advanced QoS CLI mode), classification offset/pattern rules, and multiple statistics tables covering per-port policy stats, single/aggregate policer stats, and output queue stats. Its monitoring value is centered on QoS performance counters—tracking how much traffic is being marked, policed, or dropped per queue/policer, which helps diagnose congestion or misclassified traffic. It is Cisco proprietary, standing alongside (not replacing) the standard DiffServ MIB concepts. It is deployed on Cisco Small Business switches applying QoS policies to prioritize voice/video traffic over an SMB LAN. Engineers can download the CISCOSB-QOS-CLI-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-QOS-CLI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Small Business switch
Monitoring Examples
An administrator would check rlQosCliQosMode to confirm whether the switch is in basic or advanced QoS mode, then review rlQosOffsetTable/rlQosOffsetEntry (via rlQosOffsetType, rlQosOffsetPattern, rlQosOffsetMask) to verify custom classification rules are matching intended traffic. Polling counters under rlQosStatistics such as per-port policy or output-queue statistics tables would reveal whether a specific queue is dropping packets due to policer limits, indicating the configured MIR/QoS thresholds are too aggressive for current traffic load.
What Can Be Monitored
- QoS CLI mode (basic/advanced)
- classification offset rules
- per-port policy statistics
- policer statistics (single/aggregate)
- output queue statistics
- global QoS statistics counters
This MIB depends on
Related MIBs
Imported Objects
From CISCOSB-MIB
| Percents | |
| switch001 | MODULE-IDENTITY |
From CISCOSB-POLICY-MIB
| StatisticsClearActionType | |
| StatisticsDPType |
From IF-MIB
| InterfaceIndex |
From Q-BRIDGE-MIB
| PortList | |
| VlanId |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowPointer | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using rlQosAclCounterValue OID:
Select a Cisco Small Business managed switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rlQosAclCounterValue into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The value of the ACE counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT rlIfIndex | 1.3.6.1.4.1.9.6.1.101.88.13.1.1 | INTEGER | not-accessible | Interface Index. |
| STR rlIfProfileName | 1.3.6.1.4.1.9.6.1.101.88.14.1.1 | DisplayString | not-accessible | Interface Index. |
| NUM rlIfType | 1.3.6.1.4.1.9.6.1.101.88.13.1.2 | InterfaceType | not-accessible | Interface Type(vlan/port). |
| BIN rlQosAceAccount | 1.3.6.1.4.1.9.6.1.101.88.6.1.12 | BinaryStatus | read-create | ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. |
| ACE rlQosAceAction | 1.3.6.1.4.1.9.6.1.101.88.6.1.2 | AceActionType | read-create | ACE Action to take. |
| rlQosAceEntry | 1.3.6.1.4.1.9.6.1.101.88.6.1 | not-accessible | Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex | |
| INT rlQosAceIndex | 1.3.6.1.4.1.9.6.1.101.88.6.1.1 | INTEGER | not-accessible | An arbitrary incremental Index for the ACE table. |
| ROW rlQosAceStatus | 1.3.6.1.4.1.9.6.1.101.88.6.1.13 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosAceTable | 1.3.6.1.4.1.9.6.1.101.88.6 | not-accessible | This table specifies ACE table information | |
| BIN rlQosAceTidxAccount | 1.3.6.1.4.1.9.6.1.101.88.31.1.13 | BinaryStatus | read-create | ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE. |
| INT rlQosAceTidxAclIndex | 1.3.6.1.4.1.9.6.1.101.88.31.1.1 | INTEGER | not-accessible | An arbitrary incremental Index for the ACL ACE connection. |
| ACE rlQosAceTidxAction | 1.3.6.1.4.1.9.6.1.101.88.31.1.3 | AceActionType | read-create | ACE Action to take. |
| RLQ rlQosAceTidxActionDropType | 1.3.6.1.4.1.9.6.1.101.88.31.1.20 | RlQosAceTidxActionDropType | read-create | This field is valid only if AceActionType is deny or deny-DisablePort. |
| rlQosAceTidxEntry | 1.3.6.1.4.1.9.6.1.101.88.31.1 | not-accessible | Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index | |
| INT rlQosAceTidxIndex | 1.3.6.1.4.1.9.6.1.101.88.31.1.2 | INTEGER | not-accessible | An arbitrary incremental Index for the ACE table. |
| ROW rlQosAceTidxStatus | 1.3.6.1.4.1.9.6.1.101.88.31.1.14 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosAceTidxTable | 1.3.6.1.4.1.9.6.1.101.88.31 | not-accessible | This table specifies ACE table with two index information | |
| STR rlQosAceTidxTimeRange | 1.3.6.1.4.1.9.6.1.101.88.31.1.15 | DisplayString | read-create | ACE time range name. |
| T/F rlQosAceTidxTimeRangeIsActive | 1.3.6.1.4.1.9.6.1.101.88.31.1.16 | TruthValue | read-only | ACE time range is rule active state shows is ACE currently active or not. |
| INT rlQosAceTidxTuple1 | 1.3.6.1.4.1.9.6.1.101.88.31.1.5 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple10 | 1.3.6.1.4.1.9.6.1.101.88.31.1.18 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple11 | 1.3.6.1.4.1.9.6.1.101.88.31.1.19 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple2 | 1.3.6.1.4.1.9.6.1.101.88.31.1.6 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple3 | 1.3.6.1.4.1.9.6.1.101.88.31.1.7 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple4 | 1.3.6.1.4.1.9.6.1.101.88.31.1.8 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple5 | 1.3.6.1.4.1.9.6.1.101.88.31.1.9 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple6 | 1.3.6.1.4.1.9.6.1.101.88.31.1.10 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple7 | 1.3.6.1.4.1.9.6.1.101.88.31.1.11 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple8 | 1.3.6.1.4.1.9.6.1.101.88.31.1.12 | INTEGER | read-create | ACE Tuple pointer. |
| INT rlQosAceTidxTuple9 | 1.3.6.1.4.1.9.6.1.101.88.31.1.17 | INTEGER | read-create | ACE Tuple pointer. |
| ACE rlQosAceTidxType | 1.3.6.1.4.1.9.6.1.101.88.31.1.4 | AceObjectType | read-create | ACE Type |
| INT rlQosAceTuple1 | 1.3.6.1.4.1.9.6.1.101.88.6.1.4 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple2 | 1.3.6.1.4.1.9.6.1.101.88.6.1.5 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple3 | 1.3.6.1.4.1.9.6.1.101.88.6.1.6 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple4 | 1.3.6.1.4.1.9.6.1.101.88.6.1.7 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple5 | 1.3.6.1.4.1.9.6.1.101.88.6.1.8 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple6 | 1.3.6.1.4.1.9.6.1.101.88.6.1.9 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple7 | 1.3.6.1.4.1.9.6.1.101.88.6.1.10 | INTEGER | read-create | ACE Tuple 1 pointer. |
| INT rlQosAceTuple8 | 1.3.6.1.4.1.9.6.1.101.88.6.1.11 | INTEGER | read-create | ACE Tuple 1 pointer. |
| ACE rlQosAceType | 1.3.6.1.4.1.9.6.1.101.88.6.1.3 | AceObjectType | read-create | ACE Type |
| INT rlQosAclAceRefAcePointer | 1.3.6.1.4.1.9.6.1.101.88.8.1.1 | INTEGER | not-accessible | The Index is the ACE pointer |
| INT rlQosAclAceRefAclPointer | 1.3.6.1.4.1.9.6.1.101.88.8.1.2 | INTEGER | read-create | ACL index Pointer |
| rlQosAclAceRefEntry | 1.3.6.1.4.1.9.6.1.101.88.8.1 | not-accessible | Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer | |
| ROW rlQosAclAceRefStatus | 1.3.6.1.4.1.9.6.1.101.88.8.1.3 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosAclAceRefTable | 1.3.6.1.4.1.9.6.1.101.88.8 | not-accessible | This table specifies the ACE to ACL relationship. | |
| INT rlQosAclCounterAceIndex | 1.3.6.1.4.1.9.6.1.101.88.24.1.3 | INTEGER | read-only | Index of ACE, which is belong to an ACL. |
| INT rlQosAclCounterAclIndex | 1.3.6.1.4.1.9.6.1.101.88.24.1.2 | INTEGER | read-only | Index of ACL, which was applied on the IfIndex. |
| rlQosAclCounterEntry | 1.3.6.1.4.1.9.6.1.101.88.24.1 | not-accessible | This entry shows value of conter for a particular ACE of an ACL. | |
| NUM rlQosAclCounterInterface | 1.3.6.1.4.1.9.6.1.101.88.24.1.1 | InterfaceIndex | read-only | Interface Index on which ACL is applied. |
| rlQosAclCounterTable | 1.3.6.1.4.1.9.6.1.101.88.24 | not-accessible | The table is used to show statistics for ACL applied on an interface. | |
| C32 rlQosAclCounterValueEx | 1.3.6.1.4.1.9.6.1.101.88.24.1.4 | Counter32 | read-only | The value of the ACE counter. |
| ACL rlQosAclDefaultAction | 1.3.6.1.4.1.9.6.1.101.88.13.1.12 | AclDefaultAction | read-create | When one ACL is enterd then what to do for the last rull. |
| rlQosAclEntry | 1.3.6.1.4.1.9.6.1.101.88.7.1 | not-accessible | Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex | |
| INT rlQosAclIndex | 1.3.6.1.4.1.9.6.1.101.88.7.1.1 | INTEGER | not-accessible | An arbitrary incremental Index for the ACE table. |
| STR rlQosAclName | 1.3.6.1.4.1.9.6.1.101.88.7.1.2 | DisplayString | read-create | Name ACL. |
| INT rlQosAclNumOfAces | 1.3.6.1.4.1.9.6.1.101.88.7.1.5 | INTEGER | read-only | Holds number of aces in the acl. |
| ROW rlQosAclStatus | 1.3.6.1.4.1.9.6.1.101.88.7.1.4 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosAclTable | 1.3.6.1.4.1.9.6.1.101.88.7 | not-accessible | This table specifies ACL table information | |
| ACL rlQosAclType | 1.3.6.1.4.1.9.6.1.101.88.7.1.3 | AclObjectType | read-create | ACL Type. |
| QOS rlQosAdvcGlobalTrustMode | 1.3.6.1.4.1.9.6.1.101.88.46.1.4 | QosTrustMode | read-write | This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode. |
| rlQosAggregatePolicerStatisticsEntry | 1.3.6.1.4.1.9.6.1.101.88.35.3.1 | not-accessible | Each entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter for the meter is enabled and three counters values - for green, yellow and red profiles bytes. | |
| STA rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.3.1.2 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits for In Profile . |
| C64 rlQosAggregatePolicerStatisticsInProfileCounterValue | 1.3.6.1.4.1.9.6.1.101.88.35.3.1.1 | Counter64 | read-only | Counter value of In Profile amount of bytes. |
| STA rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.3.1.4 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits for Out Profile. |
| C64 rlQosAggregatePolicerStatisticsOutProfileCounterValue | 1.3.6.1.4.1.9.6.1.101.88.35.3.1.3 | Counter64 | read-only | Counter value of Out Profile amount of bytes. |
| ROW rlQosAggregatePolicerStatisticsStatus | 1.3.6.1.4.1.9.6.1.101.88.35.3.1.5 | RowStatus | read-write | The status of a table entry. It is used to delete an entry from this table. |
| rlQosAggregatePolicerStatisticsTable | 1.3.6.1.4.1.9.6.1.101.88.35.3 | not-accessible | This table specifies statistics counters per QoS aggregate meter | |
| RLQ rlQoSApplicationDefaultAction | 1.3.6.1.4.1.9.6.1.101.88.49 | RlQosApplicationDefaultActionType | read-write | This scalar specifies application-specific default action |
| STR rlQosApplicationName | 1.3.6.1.4.1.9.6.1.101.88.48.1.1 | DisplayString | not-accessible | This field represents the application name and traffic type. |
| INT rlQosApplicationTrapId | 1.3.6.1.4.1.9.6.1.101.88.48.1.2 | INTEGER | read-only | This field defines the trap id to be use in the class map entry. |
| rlQosApplicationTrapIdEntry | 1.3.6.1.4.1.9.6.1.101.88.48.1 | not-accessible | This entry holds the trapId for application using the trap action in the class map table. | |
| rlQosApplicationTrapIdTable | 1.3.6.1.4.1.9.6.1.101.88.48 | not-accessible | The read only table is used to get the trapId assisated to application wants to use the trap action in the class map table | |
| QOS rlQosBasicGlobalTrustMode | 1.3.6.1.4.1.9.6.1.101.88.46.1.3 | QosTrustMode | read-write | This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode. |
| INT rlQosCbsPortRateLimit | 1.3.6.1.4.1.9.6.1.101.88.13.1.19 | INTEGER | read-create | The CBS for the port Rate limit. N/A when the Rate limit is disabled |
| INT rlQosCbsPortShaper | 1.3.6.1.4.1.9.6.1.101.88.13.1.8 | INTEGER | read-create | The CBS for the port shaper. N/A when the shper is disabled |
| INT rlQosCbsQueue1 | 1.3.6.1.4.1.9.6.1.101.88.23.1.3 | INTEGER | read-create | CBS for Queue1 0 for not active |
| INT rlQosCbsQueue2 | 1.3.6.1.4.1.9.6.1.101.88.23.1.5 | INTEGER | read-create | CBS for Queue2 0 for not active |
| INT rlQosCbsQueue3 | 1.3.6.1.4.1.9.6.1.101.88.23.1.7 | INTEGER | read-create | CBS for Queue3 0 for not active |
| INT rlQosCbsQueue4 | 1.3.6.1.4.1.9.6.1.101.88.23.1.9 | INTEGER | read-create | CBS for Queue4 0 for not active |
| INT rlQosCbsQueue5 | 1.3.6.1.4.1.9.6.1.101.88.23.1.11 | INTEGER | read-create | CBS for Queue5 0 for not active |
| INT rlQosCbsQueue6 | 1.3.6.1.4.1.9.6.1.101.88.23.1.13 | INTEGER | read-create | CBS for Queue6 0 for not active |
| INT rlQosCbsQueue7 | 1.3.6.1.4.1.9.6.1.101.88.23.1.15 | INTEGER | read-create | CBS for Queue7 0 for not active |
| INT rlQosCbsQueue8 | 1.3.6.1.4.1.9.6.1.101.88.23.1.17 | INTEGER | read-create | CBS for Queue8 0 for not active |
| INT rlQosCirPortRateLimit | 1.3.6.1.4.1.9.6.1.101.88.13.1.18 | INTEGER | read-create | The CIR for the port rate limit. N/A when the Rate limit is disabled |
| INT rlQosCirPortShaper | 1.3.6.1.4.1.9.6.1.101.88.13.1.7 | INTEGER | read-create | The CIR for the port shaper. N/A when the shper is disabled |
| INT rlQosCirQueue1 | 1.3.6.1.4.1.9.6.1.101.88.23.1.2 | INTEGER | read-create | CIR for Queue1 0 for not active |
| INT rlQosCirQueue2 | 1.3.6.1.4.1.9.6.1.101.88.23.1.4 | INTEGER | read-create | CIR for Queue2 0 for not active |
| INT rlQosCirQueue3 | 1.3.6.1.4.1.9.6.1.101.88.23.1.6 | INTEGER | read-create | CIR for Queue3 0 for not active |
| INT rlQosCirQueue4 | 1.3.6.1.4.1.9.6.1.101.88.23.1.8 | INTEGER | read-create | CIR for Queue4 0 for not active |
| INT rlQosCirQueue5 | 1.3.6.1.4.1.9.6.1.101.88.23.1.10 | INTEGER | read-create | CIR for Queue5 0 for not active |
| INT rlQosCirQueue6 | 1.3.6.1.4.1.9.6.1.101.88.23.1.12 | INTEGER | read-create | CIR for Queue6 0 for not active |
| INT rlQosCirQueue7 | 1.3.6.1.4.1.9.6.1.101.88.23.1.14 | INTEGER | read-create | CIR for Queue7 0 for not active |
| INT rlQosCirQueue8 | 1.3.6.1.4.1.9.6.1.101.88.23.1.16 | INTEGER | read-create | CIR for Queue8 0 for not active |
| U32 rlQosClassifierRulesNumberUtilizationSystem | 1.3.6.1.4.1.9.6.1.101.88.36.3 | Unsigned32 | read-only | Number of used rules per system, in short rule resolution |
| rlQosClassifierUtilization | 1.3.6.1.4.1.9.6.1.101.88.36 | |||
| rlQosClassifierUtilizationEntry | 1.3.6.1.4.1.9.6.1.101.88.36.1.1 | not-accessible | A Single entry containing Classifier utilization information. | |
| U32 rlQosClassifierUtilizationFreeRulesNumber | 1.3.6.1.4.1.9.6.1.101.88.36.1.1.4 | Unsigned32 | read-only | The classifier utilization number of not used yet rules on the unit, in short rules resolution. |
| U32 rlQosClassifierUtilizationPercent | 1.3.6.1.4.1.9.6.1.101.88.36.1.1.2 | Unsigned32 | read-only | The classifier utilization percentage. |
| U32 rlQosClassifierUtilizationRulesNumber | 1.3.6.1.4.1.9.6.1.101.88.36.1.1.3 | Unsigned32 | read-only | The classifier utilization number of used rules, in short rules resolution. |
| U32 rlQosClassifierUtilizationSystem | 1.3.6.1.4.1.9.6.1.101.88.36.2 | Unsigned32 | read-only | The system classifier utilization percentage. |
| rlQosClassifierUtilizationTable | 1.3.6.1.4.1.9.6.1.101.88.36.1 | not-accessible | A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system. | |
| U32 rlQosClassifierUtilizationUnitId | 1.3.6.1.4.1.9.6.1.101.88.36.1.1.1 | Unsigned32 | not-accessible | The Unit ID of this Classifier. must be unique per entry. This is an index into the table. |
| CLA rlQosClassMapAction | 1.3.6.1.4.1.9.6.1.101.88.9.1.4 | ClassMapAction | read-create | Class Map Action. |
| T/F rlQosClassMapCounterEnable | 1.3.6.1.4.1.9.6.1.101.88.9.1.16 | TruthValue | read-create | Enable/disable counting per class map. Counts packets matche the class map rules. |
| rlQosClassMapCounterEntry | 1.3.6.1.4.1.9.6.1.101.88.47.1 | not-accessible | This entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is set to zero upon reading its value. | |
| rlQosClassMapCounterTable | 1.3.6.1.4.1.9.6.1.101.88.47 | not-accessible | The table is used to show statistics for ACL applied on an interface. | |
| C64 rlQosClassMapCounterValue | 1.3.6.1.4.1.9.6.1.101.88.47.1.2 | Counter64 | read-only | This field returns the current value of the class map counter. |
| INT rlQosClassMapDestInterface | 1.3.6.1.4.1.9.6.1.101.88.9.1.12 | INTEGER | read-create | Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was forwarded. |
| rlQosClassMapEntry | 1.3.6.1.4.1.9.6.1.101.88.9.1 | not-accessible | Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex | |
| INT rlQosClassMapIndex | 1.3.6.1.4.1.9.6.1.101.88.9.1.1 | INTEGER | not-accessible | Class Map Index |
| INT rlQosClassMapMarkValue | 1.3.6.1.4.1.9.6.1.101.88.9.1.5 | INTEGER | read-create | Mark value when mark action has been chosen in Class Map Action field. |
| MAR rlQosClassMapMarkVlan | 1.3.6.1.4.1.9.6.1.101.88.9.1.9 | MarkVlanAction | read-create | If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet. |
| INT rlQosClassMapMatch1 | 1.3.6.1.4.1.9.6.1.101.88.9.1.7 | INTEGER | read-create | Match ACL 1 pointer. |
| INT rlQosClassMapMatch2 | 1.3.6.1.4.1.9.6.1.101.88.9.1.8 | INTEGER | read-create | Match ACL 2 pointer. |
| INT rlQosClassMapMatch3 | 1.3.6.1.4.1.9.6.1.101.88.9.1.14 | INTEGER | read-create | Match ACL 3 pointer. |
| STR rlQosClassMapName | 1.3.6.1.4.1.9.6.1.101.88.9.1.2 | DisplayString | read-create | Name of the Class Map. |
| INT rlQosClassMapNewVlan | 1.3.6.1.4.1.9.6.1.101.88.9.1.10 | INTEGER | read-create | If rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id. |
| INT rlQosClassMapPolicer | 1.3.6.1.4.1.9.6.1.101.88.9.1.6 | INTEGER | read-create | Policer pointer. 0-means no policer. |
| RED rlQosClassMapRedirectAction | 1.3.6.1.4.1.9.6.1.101.88.9.1.11 | RedirectAction | read-create | Specifiy the redirection action. |
| ROW rlQosClassMapStatus | 1.3.6.1.4.1.9.6.1.101.88.9.1.13 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosClassMapTable | 1.3.6.1.4.1.9.6.1.101.88.9 | not-accessible | This table specifies CCL table information | |
| INT rlQosClassMapTrapId | 1.3.6.1.4.1.9.6.1.101.88.9.1.15 | INTEGER | read-create | If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror. |
| U32 rlQosClassMapTunnelIdx | 1.3.6.1.4.1.9.6.1.101.88.9.1.17 | Unsigned32 | read-create | If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet |
| CLA rlQosClassMapType | 1.3.6.1.4.1.9.6.1.101.88.9.1.3 | ClassMapType | read-create | Class map type |
| INT rlQosClearCounters | 1.3.6.1.4.1.9.6.1.101.88.35.6 | INTEGER | read-write | This scalar indicates to clear all the counters. |
| QOS rlQosCliBasicModeCfg | 1.3.6.1.4.1.9.6.1.101.88.2 | QosTrustMode | read-write | *********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which trust mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none or vpt-dscp. |
| rlQosCliMib | 1.3.6.1.4.1.9.6.1.101.88 | Added: StatisticsCntrNumOfBitsType StatisticsCntrType rlQosStatistics rlQosPortPolicyStatisticsTable rlQosSinglePolicerStatisticsTable rlQosAggregatePolicerStatisticsTable rlQosOutQueueStatisticsTable rlQosGlobalStatisticsCntrsTable. | ||
| QOS rlQosCliQosMode | 1.3.6.1.4.1.9.6.1.101.88.1 | QosGlobalMode | read-write | *********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which mode the system will work: basic , advance or none. |
| INT rlQosCosIndex | 1.3.6.1.4.1.9.6.1.101.88.17.1.1 | INTEGER | not-accessible | CoS value (0-7). |
| rlQosCosQueueDefaultMapEntry | 1.3.6.1.4.1.9.6.1.101.88.29.1 | not-accessible | The entry is used to get index form particular name and table type. | |
| INT rlQosCosQueueDefaultMapQueueId | 1.3.6.1.4.1.9.6.1.101.88.29.1.2 | INTEGER | read-only | the queue id vary from the first queue id to Max Number of queues supported |
| rlQosCosQueueDefaultMapTable | 1.3.6.1.4.1.9.6.1.101.88.29 | not-accessible | The table is used to set default 802.1p map (vpt to queue) | |
| INT rlQosCosQueueDefaultMapVpt | 1.3.6.1.4.1.9.6.1.101.88.29.1.1 | INTEGER | read-only | vlan priority tag , 3 bits of priority which determine the service class. |
| rlQosCosQueueEntry | 1.3.6.1.4.1.9.6.1.101.88.17.1 | not-accessible | Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex | |
| INT rlQosCosQueueId | 1.3.6.1.4.1.9.6.1.101.88.17.1.2 | INTEGER | read-create | Queue ID. |
| rlQosCosQueueTable | 1.3.6.1.4.1.9.6.1.101.88.17 | not-accessible | This table specifies The Cos to queue map table | |
| INT rlQosCPUSafeGuardEnable | 1.3.6.1.4.1.9.6.1.101.88.38 | INTEGER | read-write | This scalar enables/disables CPU Safeguard. |
| POR rlQosDenyAceStatisticsClearIfCounters | 1.3.6.1.4.1.9.6.1.101.88.44 | PortList | read-write | Each bit that is set in this portList represent a port or trunk that its hit counters should be reset. |
| INT rlQosDenyAceStatisticsClearOtherFlowCounter | 1.3.6.1.4.1.9.6.1.101.88.45 | INTEGER | read-write | This scalar indicates clearing 'Other'-type flow counter operation. |
| rlQosDenyAceStatisticsEntry | 1.3.6.1.4.1.9.6.1.101.88.42.1 | not-accessible | Each entry in this table holds number of hits for deny ACEs attached to specific Interface. | |
| INT rlQosDenyAceStatisticsIfCounter | 1.3.6.1.4.1.9.6.1.101.88.42.1.2 | INTEGER | read-only | Number of hits on deny ACEs for this interface. |
| INT rlQosDenyAceStatisticsIfIndex | 1.3.6.1.4.1.9.6.1.101.88.42.1.1 | INTEGER | not-accessible | Interface Index. |
| INT rlQosDenyAceStatisticsOtherFlowCounter | 1.3.6.1.4.1.9.6.1.101.88.43 | INTEGER | read-only | Number of hits on deny ACEs for 'Other'-type flow. |
| rlQosDenyAceStatisticsTable | 1.3.6.1.4.1.9.6.1.101.88.42 | not-accessible | This table holds statistics for deny ACEs. | |
| INT rlQosDp | 1.3.6.1.4.1.9.6.1.101.88.34.1.2 | INTEGER | read-create | New DP. |
| INT rlQosDscp | 1.3.6.1.4.1.9.6.1.101.88.34.1.1 | INTEGER | not-accessible | Packet DSCP. |
| INT rlQosDscpIndex | 1.3.6.1.4.1.9.6.1.101.88.18.1.1 | INTEGER | not-accessible | DSCP value. |
| T/F rlQosDscpMutationEnable | 1.3.6.1.4.1.9.6.1.101.88.46.1.6 | TruthValue | read-write | This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true. |
| rlQosDscpMutationEntry | 1.3.6.1.4.1.9.6.1.101.88.15.1 | not-accessible | Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp | |
| rlQosDscpMutationTable | 1.3.6.1.4.1.9.6.1.101.88.15 | not-accessible | This table specifies The DSCP Mutation table | |
| INT rlQosDscpQueueDefaultMapDscp | 1.3.6.1.4.1.9.6.1.101.88.33.1.1 | INTEGER | read-only | dscp , 6 bits of priority which determine the service class. |
| rlQosDscpQueueDefaultMapEntry | 1.3.6.1.4.1.9.6.1.101.88.33.1 | not-accessible | The entry is used to get index form particular name and table type. | |
| INT rlQosDscpQueueDefaultMapQueueId | 1.3.6.1.4.1.9.6.1.101.88.33.1.2 | INTEGER | read-only | the queue id vary from the first queue id to Max Number of queues supported |
| rlQosDscpQueueDefaultMapTable | 1.3.6.1.4.1.9.6.1.101.88.33 | not-accessible | The table is used to set default dscp to queue map | |
| rlQosDscpQueueEntry | 1.3.6.1.4.1.9.6.1.101.88.18.1 | not-accessible | Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex | |
| rlQosDscpQueueTable | 1.3.6.1.4.1.9.6.1.101.88.18 | not-accessible | This table specifies The DSCP to Queue map table | |
| rlQosDscpRemarkEntry | 1.3.6.1.4.1.9.6.1.101.88.16.1 | not-accessible | Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp | |
| rlQosDscpRemarkTable | 1.3.6.1.4.1.9.6.1.101.88.16 | not-accessible | This table specifies The DSCP Remark table | |
| rlQosDscpToDpEntry | 1.3.6.1.4.1.9.6.1.101.88.34.1 | not-accessible | Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp | |
| rlQosDscpToDpTable | 1.3.6.1.4.1.9.6.1.101.88.34 | not-accessible | This table specifies The DSCP To Dp table | |
| rlQosEfManageEntry | 1.3.6.1.4.1.9.6.1.101.88.21.1 | not-accessible | This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId | |
| rlQosEfManageTable | 1.3.6.1.4.1.9.6.1.101.88.21 | not-accessible | This table specifies UDP Port to DSCP map table | |
| INT rlQosEfPriority | 1.3.6.1.4.1.9.6.1.101.88.21.1.3 | INTEGER | read-create | The priority of the queue |
| INT rlQosEfQueueId | 1.3.6.1.4.1.9.6.1.101.88.21.1.1 | INTEGER | not-accessible | Queue-ID. |
| BIN rlQosEfState | 1.3.6.1.4.1.9.6.1.101.88.21.1.2 | BinaryStatus | read-create | Enable/disable |
| rlQosFreeIndexesEntry | 1.3.6.1.4.1.9.6.1.101.88.25.1 | not-accessible | The entry is used to get free index for particular table. | |
| rlQosFreeIndexesTable | 1.3.6.1.4.1.9.6.1.101.88.25 | not-accessible | The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases. | |
| INT rlQosFreeIndexesTableId | 1.3.6.1.4.1.9.6.1.101.88.25.1.1 | INTEGER | read-only | Identification of the table, for which free index is retrieved. |
| INT rlQosFreeIndexesValue | 1.3.6.1.4.1.9.6.1.101.88.25.1.2 | INTEGER | read-only | Free index for table. 0 means no free entries. |
| INT rlQosGlobalIndex | 1.3.6.1.4.1.9.6.1.101.88.46.1.1 | INTEGER | not-accessible | Entry index - currenly only one entry can exist, indexes hard coded with value '1'. |
| QOS rlQosGlobalQoSMode | 1.3.6.1.4.1.9.6.1.101.88.46.1.2 | QosGlobalMode | read-write | This field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced. |
| C64 rlQosGlobalStatisticsCntrsCounterValue | 1.3.6.1.4.1.9.6.1.101.88.35.5.1.3 | Counter64 | read-only | Counter value. |
| rlQosGlobalStatisticsCntrsEntry | 1.3.6.1.4.1.9.6.1.101.88.35.5.1 | not-accessible | Each entry represents global counter. | |
| STA rlQosGlobalStatisticsCntrsNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.5.1.2 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits. |
| rlQosGlobalStatisticsCntrsTable | 1.3.6.1.4.1.9.6.1.101.88.35.5 | not-accessible | This table specifies statistics global counters for specific rules for all ports that they are connected to | |
| STA rlQosGlobalStatisticsCntrsType | 1.3.6.1.4.1.9.6.1.101.88.35.5.1.1 | StatisticsCntrType | read-only | Counter type. |
| ROW rlQosGlobalStatisticsStatus | 1.3.6.1.4.1.9.6.1.101.88.35.5.1.4 | RowStatus | read-write | The status of a table entry. It is used to delete an entry from this table. |
| INT rlQosIfAclIn | 1.3.6.1.4.1.9.6.1.101.88.13.1.14 | INTEGER | read-create | Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied. |
| INT rlQosIfAclOut | 1.3.6.1.4.1.9.6.1.101.88.13.1.15 | INTEGER | read-create | Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied. |
| INT rlQosIfIpv6AclIn | 1.3.6.1.4.1.9.6.1.101.88.13.1.20 | INTEGER | read-create | Index of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied. |
| INT rlQosIfIpv6AclOut | 1.3.6.1.4.1.9.6.1.101.88.13.1.21 | INTEGER | read-create | Index of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied. |
| INT rlQosIfPolicerIn | 1.3.6.1.4.1.9.6.1.101.88.13.1.16 | INTEGER | read-create | Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied. |
| rlQosIfPolicyEntry | 1.3.6.1.4.1.9.6.1.101.88.13.1 | not-accessible | Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType | |
| INT rlQosIfPolicyMapPointerIn | 1.3.6.1.4.1.9.6.1.101.88.13.1.3 | INTEGER | read-create | Policy map pointer Input. |
| INT rlQosIfPolicyMapPointerOut | 1.3.6.1.4.1.9.6.1.101.88.13.1.4 | INTEGER | read-create | Policy map pointer Output. |
| ROW rlQosIfPolicyMapStatus | 1.3.6.1.4.1.9.6.1.101.88.13.1.13 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosIfPolicyTable | 1.3.6.1.4.1.9.6.1.101.88.13 | not-accessible | This table specifies for each interface the Policy Map attach to it | |
| rlQosIfProfileCfgEntry | 1.3.6.1.4.1.9.6.1.101.88.14.1 | not-accessible | Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId | |
| rlQosIfProfileCfgTable | 1.3.6.1.4.1.9.6.1.101.88.14 | not-accessible | This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters. | |
| STR rlQosIfProfilePointer | 1.3.6.1.4.1.9.6.1.101.88.13.1.9 | DisplayString | read-create | Interface Profile name pointer. |
| ROW rlQosIfprofileStatus | 1.3.6.1.4.1.9.6.1.101.88.14.1.16 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| BIN rlQosIfTrustActive | 1.3.6.1.4.1.9.6.1.101.88.13.1.5 | BinaryStatus | read-create | Interface Basic Mode Trust is active or not . |
| INT rlQosMaxNumOfAce | 1.3.6.1.4.1.9.6.1.101.88.3 | INTEGER | read-only | This scalar define the max number of aces. |
| INT rlQosMibVersion | 1.3.6.1.4.1.9.6.1.101.88.32 | INTEGER | read-only | MIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable 9 - Add statistics 10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType 11 - Added rlQosCPUSafeGuardEnable |
| rlQosModeGlobalCfgEntry | 1.3.6.1.4.1.9.6.1.101.88.46.1 | not-accessible | This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist. | |
| ROW rlQosModeGlobalCfgStatus | 1.3.6.1.4.1.9.6.1.101.88.46.1.7 | RowStatus | read-write | This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable. |
| rlQosModeGlobalCfgTable | 1.3.6.1.4.1.9.6.1.101.88.46 | not-accessible | This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. | |
| rlQosNamesToIndexesEntry | 1.3.6.1.4.1.9.6.1.101.88.26.1 | not-accessible | The entry is used to get index form particular name and table type. | |
| STR rlQosNamesToIndexesName | 1.3.6.1.4.1.9.6.1.101.88.26.1.2 | DisplayString | not-accessible | The name of the entry |
| rlQosNamesToIndexesTable | 1.3.6.1.4.1.9.6.1.101.88.26 | not-accessible | The table is used to get the ACL,Class-Map and Policy-Map indexes from the name. | |
| INT rlQosNamesToIndexesTableId | 1.3.6.1.4.1.9.6.1.101.88.26.1.1 | INTEGER | not-accessible | Identification of the table, for which the index is retrieved. |
| INT rlQosNamesToIndexesValue | 1.3.6.1.4.1.9.6.1.101.88.26.1.3 | INTEGER | read-only | the index for table |
| INT rlQosNewDscp | 1.3.6.1.4.1.9.6.1.101.88.15.1.2 | INTEGER | read-create | New DSCP. |
| INT rlQosNumOfIfConnections | 1.3.6.1.4.1.9.6.1.101.88.22.1.19 | INTEGER | read-only | how many time this entry connected to the if policy table |
| rlQosOffsetEntry | 1.3.6.1.4.1.9.6.1.101.88.4.1 | not-accessible | Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex | |
| INT rlQosOffsetIndex | 1.3.6.1.4.1.9.6.1.101.88.4.1.1 | INTEGER | not-accessible | An arbitrary incremental Index for the offset table. |
| INT rlQosOffsetMask | 1.3.6.1.4.1.9.6.1.101.88.4.1.4 | INTEGER | read-create | Define which bit to be extracted from the offset. |
| INT rlQosOffsetPattern | 1.3.6.1.4.1.9.6.1.101.88.4.1.5 | INTEGER | read-create | The value to match too. |
| ROW rlQosOffsetStatus | 1.3.6.1.4.1.9.6.1.101.88.4.1.7 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosOffsetTable | 1.3.6.1.4.1.9.6.1.101.88.4 | not-accessible | This table specifies Offset Table information | |
| INT rlQosOffsetTuplePointer | 1.3.6.1.4.1.9.6.1.101.88.4.1.6 | INTEGER | read-create | Pointer for the relevant Tuple. |
| CLA rlQosOffsetType | 1.3.6.1.4.1.9.6.1.101.88.4.1.2 | ClassOffsetType | read-create | Start of the offset. |
| INT rlQosOffsetValue | 1.3.6.1.4.1.9.6.1.101.88.4.1.3 | INTEGER | read-create | The Offset value. |
| INT rlQosOldDscp | 1.3.6.1.4.1.9.6.1.101.88.15.1.1 | INTEGER | not-accessible | Old DSCP. |
| STA rlQosOutQueueStatisticsCntrNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.12 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits for the counter. |
| C64 rlQosOutQueueStatisticsCounterAllValue | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.11 | Counter64 | read-only | The counter for all traffic value. |
| C64 rlQosOutQueueStatisticsCounterTailDropValue | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.10 | Counter64 | read-only | The counter for tail dropped value. |
| INT rlQosOutQueueStatisticsCountrID | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.1 | INTEGER | read-write | Counter id, the key of the table. |
| STA rlQosOutQueueStatisticsDP | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.8 | StatisticsDPType | read-write | Drop Precedence for which the flow is counted. |
| T/F rlQosOutQueueStatisticsDPAll | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.9 | TruthValue | read-write | Indication for whether the DP is configured as range of all the DPs |
| rlQosOutQueueStatisticsEntry | 1.3.6.1.4.1.9.6.1.101.88.35.4.1 | not-accessible | Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port represent by rlQosOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value. | |
| POR rlQosOutQueueStatisticsIfIndexList | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.2 | PortList | read-write | Port for which the flow is counted. |
| T/F rlQosOutQueueStatisticsPortAll | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.3 | TruthValue | read-write | Indication for whether the port is configured as range of all the ports |
| INT rlQosOutQueueStatisticsQueue | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.6 | INTEGER | read-write | Queue for which the flow is counted. |
| T/F rlQosOutQueueStatisticsQueueAll | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.7 | TruthValue | read-write | Indication for whether the queue is configured as range of all the Queues |
| ROW rlQosOutQueueStatisticsStatus | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.13 | RowStatus | read-write | The status of a table entry. It is used to delete an entry from this table. |
| rlQosOutQueueStatisticsTable | 1.3.6.1.4.1.9.6.1.101.88.35.4 | not-accessible | This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence | |
| INT rlQosOutQueueStatisticsVlan | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.4 | INTEGER | read-write | VLAN for which the flow is counted. |
| T/F rlQosOutQueueStatisticsVlanAll | 1.3.6.1.4.1.9.6.1.101.88.35.4.1.5 | TruthValue | read-write | Indication for whether the VLAN is configured as range of all the VLANS |
| POL rlQosPolicerAction | 1.3.6.1.4.1.9.6.1.101.88.10.1.6 | PolicerAction | read-create | Out of profile Action. |
| INT rlQosPolicerCasPointerRemVal | 1.3.6.1.4.1.9.6.1.101.88.10.1.7 | INTEGER | read-create | Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark |
| U32 rlQosPolicerCbs | 1.3.6.1.4.1.9.6.1.101.88.10.1.5 | Unsigned32 | read-create | Committed rate Value. |
| U32 rlQosPolicerCir | 1.3.6.1.4.1.9.6.1.101.88.10.1.4 | Unsigned32 | read-create | Committed rate value. |
| rlQosPolicerEntry | 1.3.6.1.4.1.9.6.1.101.88.10.1 | not-accessible | Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex | |
| INT rlQosPolicerIndex | 1.3.6.1.4.1.9.6.1.101.88.10.1.1 | INTEGER | not-accessible | Policer Index. |
| STR rlQosPolicerName | 1.3.6.1.4.1.9.6.1.101.88.10.1.2 | DisplayString | read-create | Name of the Policer. |
| ROW rlQosPolicerStatus | 1.3.6.1.4.1.9.6.1.101.88.10.1.8 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosPolicerTable | 1.3.6.1.4.1.9.6.1.101.88.10 | not-accessible | This table specifies All the Policers in the system Information | |
| POL rlQosPolicerType | 1.3.6.1.4.1.9.6.1.101.88.10.1.3 | PolicerType | read-create | Policer type |
| INT rlQosPolicyClassPriorityRefClassPointer | 1.3.6.1.4.1.9.6.1.101.88.39.1.2 | INTEGER | read-create | Class-map index Pointer |
| rlQosPolicyClassPriorityRefEntry | 1.3.6.1.4.1.9.6.1.101.88.39.1 | not-accessible | Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer. It is also specifies the class-map priotiry in the policy-map, which set the rules order within the policy-map | |
| INT rlQosPolicyClassPriorityRefPolicyPointer | 1.3.6.1.4.1.9.6.1.101.88.39.1.3 | INTEGER | read-create | Policy map index Pointer |
| INT rlQosPolicyClassPriorityRefPriority | 1.3.6.1.4.1.9.6.1.101.88.39.1.1 | INTEGER | not-accessible | The class-map priority within the policy-map |
| ROW rlQosPolicyClassPriorityRefStatus | 1.3.6.1.4.1.9.6.1.101.88.39.1.4 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosPolicyClassPriorityRefTable | 1.3.6.1.4.1.9.6.1.101.88.39 | not-accessible | This table specifies The relationship between policy map to class map | |
| INT rlQosPolicyClassRefClassPointer | 1.3.6.1.4.1.9.6.1.101.88.12.1.1 | INTEGER | not-accessible | The Index is the Class-map pointer |
| rlQosPolicyClassRefEntry | 1.3.6.1.4.1.9.6.1.101.88.12.1 | not-accessible | Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer | |
| INT rlQosPolicyClassRefPolicyPointer | 1.3.6.1.4.1.9.6.1.101.88.12.1.2 | INTEGER | read-create | Policy map index Pointer |
| ROW rlQosPolicyClassRefStatus | 1.3.6.1.4.1.9.6.1.101.88.12.1.3 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosPolicyClassRefTable | 1.3.6.1.4.1.9.6.1.101.88.12 | not-accessible | This table specifies The relationship between policy map to class map | |
| rlQosPolicyMapEntry | 1.3.6.1.4.1.9.6.1.101.88.11.1 | not-accessible | Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex | |
| INT rlQosPolicyMapIndex | 1.3.6.1.4.1.9.6.1.101.88.11.1.1 | INTEGER | not-accessible | Policy map Index. |
| STR rlQosPolicyMapName | 1.3.6.1.4.1.9.6.1.101.88.11.1.2 | DisplayString | read-create | Policy map Name. |
| ROW rlQosPolicyMapStatus | 1.3.6.1.4.1.9.6.1.101.88.11.1.3 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosPolicyMapTable | 1.3.6.1.4.1.9.6.1.101.88.11 | not-accessible | This table specifies Policy Map Table Information | |
| INT rlQosPort | 1.3.6.1.4.1.9.6.1.101.88.37.1.1 | INTEGER | not-accessible | Port number |
| STA rlQosPortPolicyStatisticsCntrNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.1.1.2 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits. |
| STA rlQosPortPolicyStatisticsCntrType | 1.3.6.1.4.1.9.6.1.101.88.35.1.1.1 | StatisticsCntrType | read-write | Counter type. |
| C64 rlQosPortPolicyStatisticsCounterValue | 1.3.6.1.4.1.9.6.1.101.88.35.1.1.4 | Counter64 | read-only | Counter value. |
| T/F rlQosPortPolicyStatisticsEnableCounting | 1.3.6.1.4.1.9.6.1.101.88.35.1.1.3 | TruthValue | read-write | Indication whether the counter is enabled. |
| rlQosPortPolicyStatisticsEntry | 1.3.6.1.4.1.9.6.1.101.88.35.1.1 | not-accessible | Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled. | |
| rlQosPortPolicyStatisticsTable | 1.3.6.1.4.1.9.6.1.101.88.35.1 | not-accessible | This table specifies statistics counter for policies with specific actions | |
| BIN rlQosPortRateLimitStatus | 1.3.6.1.4.1.9.6.1.101.88.13.1.17 | BinaryStatus | read-create | If there is Rate limit on the port |
| BIN rlQosPortShaperStatus | 1.3.6.1.4.1.9.6.1.101.88.13.1.6 | BinaryStatus | read-create | If there is shaper on the port |
| rlQosPortToProfileMappingEntry | 1.3.6.1.4.1.9.6.1.101.88.37.1 | not-accessible | Each entry in this table describes mapping between port and profile | |
| rlQosPortToProfileMappingTable | 1.3.6.1.4.1.9.6.1.101.88.37 | not-accessible | This table maps between port and profile | |
| T/F rlQoSPortTrustAdvancedMode | 1.3.6.1.4.1.9.6.1.101.88.46.1.5 | TruthValue | read-write | This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode. |
| rlQosPredefBlockAclEntry | 1.3.6.1.4.1.9.6.1.101.88.30.1 | not-accessible | The entry is used to apply predefined ACLs to the interface. | |
| NUM rlQosPredefBlockAclIfIndex | 1.3.6.1.4.1.9.6.1.101.88.30.1.1 | InterfaceIndex | not-accessible | IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured. |
| NUM rlQosPredefBlockAclIfType | 1.3.6.1.4.1.9.6.1.101.88.30.1.2 | InterfaceType | not-accessible | Interface Type(vlan/port). |
| OCT rlQosPredefBlockAclMask | 1.3.6.1.4.1.9.6.1.101.88.30.1.3 | OCTET STRING | read-create | This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames |
| ROW rlQosPredefBlockAclStatus | 1.3.6.1.4.1.9.6.1.101.88.30.1.4 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosPredefBlockAclTable | 1.3.6.1.4.1.9.6.1.101.88.30 | not-accessible | The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs. | |
| STR rlQosProfileName | 1.3.6.1.4.1.9.6.1.101.88.37.1.2 | DisplayString | read-only | profile |
| INT rlQosQueueId | 1.3.6.1.4.1.9.6.1.101.88.14.1.2 | INTEGER | not-accessible | Queue id Index. |
| INT rlQosQueueNum | 1.3.6.1.4.1.9.6.1.101.88.18.1.2 | INTEGER | read-create | Queue Number. |
| rlQosQueueProfileEntry | 1.3.6.1.4.1.9.6.1.101.88.22.1 | not-accessible | Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName | |
| STR rlQosQueueProfilePointer | 1.3.6.1.4.1.9.6.1.101.88.13.1.10 | DisplayString | read-create | Queue Profile name pointer. |
| ROW rlQosQueueProfileStatus | 1.3.6.1.4.1.9.6.1.101.88.22.1.18 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosQueueProfileTable | 1.3.6.1.4.1.9.6.1.101.88.22 | not-accessible | This table describes the queue managment profiles | |
| INT rlQosQueueShapeIndex | 1.3.6.1.4.1.9.6.1.101.88.23.1.1 | INTEGER | not-accessible | Profile Index. |
| rlQosQueueShapeProfileEntry | 1.3.6.1.4.1.9.6.1.101.88.23.1 | not-accessible | Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex | |
| INT rlQosQueueShapeProfilePointer | 1.3.6.1.4.1.9.6.1.101.88.13.1.11 | INTEGER | read-create | Queue shape Profile pointer. |
| ROW rlQosQueueShapeProfileStatus | 1.3.6.1.4.1.9.6.1.101.88.23.1.18 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosQueueShapeProfileTable | 1.3.6.1.4.1.9.6.1.101.88.23 | not-accessible | This table specifies the queue shaper profile | |
| INT rlQosRedMaxDp0 | 1.3.6.1.4.1.9.6.1.101.88.14.1.7 | INTEGER | read-create | WRED Max Threshold for Drop Precedence 0. |
| INT rlQosRedMaxDp1 | 1.3.6.1.4.1.9.6.1.101.88.14.1.10 | INTEGER | read-create | WRED Max Threshold for Drop Precedence 1. |
| INT rlQosRedMaxDp2 | 1.3.6.1.4.1.9.6.1.101.88.14.1.13 | INTEGER | read-create | WRED Max Threshold for Drop Precedence 2. |
| INT rlQosRedMinDp0 | 1.3.6.1.4.1.9.6.1.101.88.14.1.6 | INTEGER | read-create | WRED Min Threshold for Drop Precedence 2. |
| INT rlQosRedMinDp1 | 1.3.6.1.4.1.9.6.1.101.88.14.1.9 | INTEGER | read-create | WRED Min Threshold for Drop Precedence 2. |
| INT rlQosRedMinDp2 | 1.3.6.1.4.1.9.6.1.101.88.14.1.12 | INTEGER | read-create | WRED Min Threshold for Drop Precedence 2. |
| INT rlQosRedProbDp0 | 1.3.6.1.4.1.9.6.1.101.88.14.1.8 | INTEGER | read-create | WRED probability for Drop Precedence 0. |
| INT rlQosRedProbDp1 | 1.3.6.1.4.1.9.6.1.101.88.14.1.11 | INTEGER | read-create | WRED probability for Drop Precedence 1. |
| INT rlQosRedProbDp2 | 1.3.6.1.4.1.9.6.1.101.88.14.1.14 | INTEGER | read-create | WRED probability for Drop Precedence 2. |
| INT rlQosRedQweight | 1.3.6.1.4.1.9.6.1.101.88.14.1.15 | INTEGER | read-create | Q factor for WRED. |
| INT rlQosRmNewDscp | 1.3.6.1.4.1.9.6.1.101.88.16.1.2 | INTEGER | read-create | New DSCP. |
| INT rlQosRmOldDscp | 1.3.6.1.4.1.9.6.1.101.88.16.1.1 | INTEGER | not-accessible | Old DSCP. |
| rlQosSinglePolicerStatisticsEntry | 1.3.6.1.4.1.9.6.1.101.88.35.2.1 | not-accessible | Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes. | |
| STA rlQosSinglePolicerStatisticsInProfileCntrNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.2.1.2 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits for in profile counter. |
| C64 rlQosSinglePolicerStatisticsInProfileCounterValue | 1.3.6.1.4.1.9.6.1.101.88.35.2.1.1 | Counter64 | read-only | Counter value of in profile traffic. |
| STA rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits | 1.3.6.1.4.1.9.6.1.101.88.35.2.1.4 | StatisticsCntrNumOfBitsType | read-only | Counter size in bits for out profile counter. |
| C64 rlQosSinglePolicerStatisticsOutProfileCounterValue | 1.3.6.1.4.1.9.6.1.101.88.35.2.1.3 | Counter64 | read-only | Counter value of Out Profile traffic. |
| ROW rlQosSinglePolicerStatisticsStatus | 1.3.6.1.4.1.9.6.1.101.88.35.2.1.5 | RowStatus | read-write | The status of a table entry. It is used to delete an entry from this table. |
| rlQosSinglePolicerStatisticsTable | 1.3.6.1.4.1.9.6.1.101.88.35.2 | not-accessible | This table specifies statistics counters per QoS meter | |
| INT rlQosStackControlCos | 1.3.6.1.4.1.9.6.1.101.88.28 | INTEGER | read-only | This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue. |
| INT rlQosStackControlQueue | 1.3.6.1.4.1.9.6.1.101.88.27 | INTEGER | read-only | This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue. |
| rlQosStatistics | 1.3.6.1.4.1.9.6.1.101.88.35 | |||
| INT rlQosTcpPort | 1.3.6.1.4.1.9.6.1.101.88.19.1.1 | INTEGER | not-accessible | TCP port number. |
| rlQosTcpPortQueueEntry | 1.3.6.1.4.1.9.6.1.101.88.19.1 | not-accessible | Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort | |
| ROW rlQosTcpPortQueueStatus | 1.3.6.1.4.1.9.6.1.101.88.19.1.3 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosTcpPortQueueTable | 1.3.6.1.4.1.9.6.1.101.88.19 | not-accessible | This table specifies TCP Port to Queue map table | |
| INT rlQosTcpQueueValue | 1.3.6.1.4.1.9.6.1.101.88.19.1.2 | INTEGER | read-create | Queue Number. |
| INT rlQosTdThersholdDp0 | 1.3.6.1.4.1.9.6.1.101.88.14.1.3 | INTEGER | read-create | Tail Drop Threshold for Drop Precedence 0. |
| INT rlQosTdThersholdDp1 | 1.3.6.1.4.1.9.6.1.101.88.14.1.4 | INTEGER | read-create | Tail Drop Threshold for Drop Precedence 1. |
| INT rlQosTdThersholdDp2 | 1.3.6.1.4.1.9.6.1.101.88.14.1.5 | INTEGER | read-create | Tail Drop Threshold for Drop Precedence 2. |
| rlQosTupleEntry | 1.3.6.1.4.1.9.6.1.101.88.5.1 | not-accessible | Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex | |
| INT rlQosTupleIndex | 1.3.6.1.4.1.9.6.1.101.88.5.1.1 | INTEGER | not-accessible | An arbitrary incremental Index for the offset table. |
| ROW rlQosTupleStatus | 1.3.6.1.4.1.9.6.1.101.88.5.1.5 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosTupleTable | 1.3.6.1.4.1.9.6.1.101.88.5 | not-accessible | This table specifies Tuple Table information | |
| CLA rlQosTupleType | 1.3.6.1.4.1.9.6.1.101.88.5.1.2 | ClassTupleType | read-create | Start of the offset. |
| INT rlQosTupleValue1 | 1.3.6.1.4.1.9.6.1.101.88.5.1.3 | INTEGER | read-create | The Tuple no.1 value can be regular integer values only. |
| OCT rlQosTupleValue2 | 1.3.6.1.4.1.9.6.1.101.88.5.1.4 | OCTET STRING | read-create | The Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask |
| QUE rlQosTypeQueue1 | 1.3.6.1.4.1.9.6.1.101.88.22.1.2 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue2 | 1.3.6.1.4.1.9.6.1.101.88.22.1.4 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue3 | 1.3.6.1.4.1.9.6.1.101.88.22.1.6 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue4 | 1.3.6.1.4.1.9.6.1.101.88.22.1.8 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue5 | 1.3.6.1.4.1.9.6.1.101.88.22.1.10 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue6 | 1.3.6.1.4.1.9.6.1.101.88.22.1.12 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue7 | 1.3.6.1.4.1.9.6.1.101.88.22.1.14 | QueueType | read-create | EF or WRR |
| QUE rlQosTypeQueue8 | 1.3.6.1.4.1.9.6.1.101.88.22.1.16 | QueueType | read-create | EF or WRR |
| INT rlQosUdpPort | 1.3.6.1.4.1.9.6.1.101.88.20.1.1 | INTEGER | not-accessible | UDP port number. |
| rlQosUdpPortQueueEntry | 1.3.6.1.4.1.9.6.1.101.88.20.1 | not-accessible | Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort | |
| ROW rlQosUdpPortQueueStatus | 1.3.6.1.4.1.9.6.1.101.88.20.1.3 | RowStatus | read-create | The status of a table entry. It is used to delete/Add an entry from this table. |
| rlQosUdpPortQueueTable | 1.3.6.1.4.1.9.6.1.101.88.20 | not-accessible | This table specifies UDP Port to Queue map table | |
| INT rlQosUdpQueueValue | 1.3.6.1.4.1.9.6.1.101.88.20.1.2 | INTEGER | read-create | Queue value. |
| INT rlQosValueQueue1 | 1.3.6.1.4.1.9.6.1.101.88.22.1.3 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue2 | 1.3.6.1.4.1.9.6.1.101.88.22.1.5 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue3 | 1.3.6.1.4.1.9.6.1.101.88.22.1.7 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue4 | 1.3.6.1.4.1.9.6.1.101.88.22.1.9 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue5 | 1.3.6.1.4.1.9.6.1.101.88.22.1.11 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue6 | 1.3.6.1.4.1.9.6.1.101.88.22.1.13 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue7 | 1.3.6.1.4.1.9.6.1.101.88.22.1.15 | INTEGER | read-create | for EF read-only for wrr the weight |
| INT rlQosValueQueue8 | 1.3.6.1.4.1.9.6.1.101.88.22.1.17 | INTEGER | read-create | for EF read-only for wrr the weight |
| STR rlQueueProfileName | 1.3.6.1.4.1.9.6.1.101.88.22.1.1 | DisplayString | not-accessible | Profile name for the Queue profile. |
RFC description
Cisco Small Business QoS management MIB supporting traffic classification, policing, queue profiles, and ACE configuration.
Start monitoring Cisco Small Business managed switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.