CIENA-CES-NOTIFICATIONS-CONTROL

All MIBs › CIENA-CES-NOTIFICATIONS-CONTROL

Organization: Ciena Corp.

Last Updated: 2017-06-07

Category: Alarm and Event Management, Vendor: Ciena

Description: Controls which SNMP notifications and traps are enabled on Ciena CES Carrier Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIENA-CES-NOTIFICATIONS-CONTROL?

CIENA-CES-NOTIFICATIONS-CONTROL is a Ciena-specific MIB for the Carrier Ethernet Switch (CES) product line that provides control objects to enable or disable categories of SNMP notifications/traps generated by the platform. It does not carry telemetry itself; instead it exposes configuration switches governing which trap categories are actively sent to an NMS. Its relevance to hardware/software status monitoring is indirect but important — by toggling notification categories on, an operator ensures the traps that would report fault conditions, link-state changes, or hardware alarms actually reach the management station rather than being silently suppressed. It works alongside Ciena's separate CES notification/trap definition MIBs, which define the underlying event OIDs that this module's controls govern. It is deployed on Ciena Carrier Ethernet switches in service-provider and enterprise metro/WAN networks to tune which SNMP alerting is active for NMS integration. Engineers can download the CIENA-CES-NOTIFICATIONS-CONTROL file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIENA-CES-NOTIFICATIONS-CONTROL. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ciena Carrier Ethernet Switch (CES)

Monitoring Examples

An operator would set the appropriate leaf under cienaCesNotificationsControl to enable a category such as hardware-fault or link-state notifications, after which the corresponding traps begin flowing to the NMS; the sample data available only shows the top-level cienaCesNotificationsControl node rather than individual category leaves, but its function is strictly as an enable/disable switch governing whether specific trap categories are emitted.

What Can Be Monitored

notification/trap category enabled-disabled state

Imported Objects

From CIENA-SMI

cienaCesNotificationsControlModule

OBJECT-IDENTITY

From CIENA-TC

CienaGlobalState

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

OIDs

OID symbolic	OID numeric	Type	Access	Description
CIE cienaCesBfdTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.29	CienaGlobalState	read-write	Setting this object to 'disabled' causes BFD related traps to be suppressed.
CIE cienaCesCfmDelayFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.22	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 delay measurement traps to be suppressed.
CIE cienaCesCfmDelayVariationFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.60	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 Delay Variation measurement traps to be suppressed.
CIE cienaCesCfmFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.21	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM fault traps to be suppressed.
CIE cienaCesCfmFrameLossFarFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.25	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 frame-loss-far measurement traps to be suppressed.
CIE cienaCesCfmFrameLossNearFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.24	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 frame-loss-near measurement traps to be suppressed.
CIE cienaCesCfmJitterFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.23	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 jitter measurement traps to be suppressed.
CIE cienaCesCfmSyntheticLossFarFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.27	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 synthetic-loss far fault and clear traps to be suppressed.
CIE cienaCesCfmSyntheticLossNearFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.26	CienaGlobalState	read-write	Setting this object to 'disabled' causes CFM Y.1731 synthetic-loss near fault and clear traps to be suppressed.
CIE cienaCesChassisAirFilterTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.67	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisAirFilterServiceNotification traps to be suppressed.
CIE cienaCesChassisAlarmCutoffTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.71	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisAlarmCutoffNotification traps to be suppressed.
CIE cienaCesChassisAllFanTempTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.17	CienaGlobalState	read-write	This object indicates whether the device sends out chassis fan temperature related traps.
CIE cienaCesChassisAllFanTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.15	CienaGlobalState	read-write	This object indicates whether the device sends out chassis fan related traps.
CIE cienaCesChassisAllFanTrayTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.16	CienaGlobalState	read-write	This object indicates whether the device sends out chassis fan tray related traps.
CIE cienaCesChassisAllPowerSupplyTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.14	CienaGlobalState	read-write	This object indicates whether the device sends out power-supply related traps.
CIE cienaCesChassisHealthTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.18	CienaGlobalState	read-write	This object indicates whether the device sends out chassis health related traps.
CIE cienaCesChassisUsbFlashEnableChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.66	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisUsbEnabledNotification and cienaCesChassisUsbDisabledNotification traps to be suppressed.
CIE cienaCesCommandFileCompletedTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.74	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesCommandFileCompletedNotification traps to be suppressed.
CIE cienaCesCommandFileFailedTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.75	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesCommandFileFailedNotification traps to be suppressed.
CIE cienaCesDataplaneBcastTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.36	CienaGlobalState	read-write	Setting this object to 'disabled' causes dataplane broadcast threshold exceed/normal traps to be suppressed.
CIE cienaCesDataplaneMcastTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.37	CienaGlobalState	read-write	Setting this object to 'disabled' will cause dataplane multicast threshold exceed/normal traps to be suppressed.
CIE cienaCesDataplanePortShapingSubscriptionTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.72	CienaGlobalState	read-write	Setting this object to 'disabled' causes dataplane cienaCesDpPortShapingSubscriptionExceedsOperSpeed and cienaCesDpPortShapingSubscriptionWithinOperSpeed traps to be suppressed.
CIE cienaCesDataplaneUcastTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.35	CienaGlobalState	read-write	Setting this object to 'disabled' causes dataplane unicast threshold exceed/normal traps to be suppressed.
CIE cienaCesFeatureLicenseInstallErrorTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.55	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesPremiumFeatureLicenseInstallErrorNotification traps to be suppressed.
CIE cienaCesFeatureLicenseStatusTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.54	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesPremiumFeatureLicenseNotInstalledNotification and cienaCesPremiumFeatureLicensePartialStatusNotification traps to be suppressed.
CIE cienaCesFileTransferCompletionTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.56	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesFTransferCompletion traps to be suppressed.
CIE cienaCesIOMAlarmInputStateChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.65	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisIOMAlarmInputStateChangeNotification traps to be suppressed.
CIE cienaCesIOMAlarmOutputStateChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.64	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisIOMAlarmOutputStateChangeNotification traps to be suppressed.
CIE cienaCesIOMBuzzerEnableChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.62	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisIOMBuzzerEnableChangeNotification traps to be suppressed.
CIE cienaCesIOMBuzzerStateChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.63	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisIOMBuzzerStateChangeNotification traps to be suppressed.
CIE cienaCesIOMStateChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.61	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesChassisIOMStateChangeNotification traps to be suppressed.
CIE cienaCesIPMgmtInterfaceAddrChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.31	CienaGlobalState	read-write	Setting this object to 'disabled' causes the IP address change trap to be suppressed.
CIE cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.32	CienaGlobalState	read-write	Setting this object to 'disabled' causes the IP Gateway change trap to be suppressed.
CIE cienaCesModuleAllModulesHealthTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.7	CienaGlobalState	read-write	This object indicates whether the device sends out module health related traps.
CIE cienaCesModuleAllModulesTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.6	CienaGlobalState	read-write	This object indicates whether the device sends out module related traps.
CIE cienaCesModuleHATrapState	1.3.6.1.4.1.1271.2.2.1.1.1.9	CienaGlobalState	read-write	This object indicates whether the device sends out the HA switchover trap.
CIE cienaCesModulePOSTErrorTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.11	CienaGlobalState	read-write	This object indicates whether the device sends out the POST error trap.
CIE cienaCesModuleProtectionModeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.10	CienaGlobalState	read-write	This object indicates whether the device sends out the protection mode state change trap.
CIE cienaCesModuleSensorTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.8	CienaGlobalState	read-write	This object indicates whether device sends out module sensor related traps.
CIE cienaCesModuleSwitchFabricDisruptedTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.12	CienaGlobalState	read-write	This object indicates whether the device sends out the switch fabric disrupted trap.
CIE cienaCesMplsTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.20	CienaGlobalState	read-write	Setting this object to 'disabled' causes MPLS related traps to be suppressed.
cienaCesNotificationsControl	1.3.6.1.4.1.1271.2.2.1.1.1
cienaCesNotificationsControlMIB	1.3.6.1.4.1.1271.2.2.1.1			This module defines the object identifiers to control the notification state for each of the notification or set of notifications defined for CES.
CIE cienaCesOamLinkEventTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.59	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesOamLinkEventTrap traps to be suppressed.
CIE cienaCesPbtFaultTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.28	CienaGlobalState	read-write	Setting this object to 'disabled' causes PBB-TE related traps to be suppressed.
CIE cienaCesPortAllTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.3	CienaGlobalState	read-write	This object indicates whether the device generates any port related traps.
CIE cienaCesPortEnhancedLinkTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.1	CienaGlobalState	read-write	This object indicates whether the device generates enhanced port link up and down traps.
CIE cienaCesPortStdLinkTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.2	CienaGlobalState	read-write	This object indicates whether the device generates standard port link up and down traps.
CIE cienaCesPortXcvrBiasChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.44	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver bias change traps to be suppressed.
CIE cienaCesPortXcvrErrorTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.41	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver error traps to be suppressed.
CIE cienaCesPortXcvrLinkStateChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.40	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver link state change traps to be suppressed.
CIE cienaCesPortXcvrRxPowerChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.46	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver RX power change traps to be suppressed.
CIE cienaCesPortXcvrSpeedInfoTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.47	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver speed information missing traps to be suppressed.
CIE cienaCesPortXcvrTempChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.42	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver temperature change traps to be suppressed.
CIE cienaCesPortXcvrTxPowerChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.45	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver TX power change traps to be suppressed.
CIE cienaCesPortXcvrUncertifiedTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.73	CienaGlobalState	read-write	Setting this object to 'enabled' enables generation of cienaCesPortXcvrUncertifiedNotification traps.
CIE cienaCesPortXcvrVoltageChangeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.43	CienaGlobalState	read-write	Setting this object to 'disabled' causes port transceiver voltage change traps to be suppressed.
CIE cienaCesRapsAlarmTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.19	CienaGlobalState	read-write	This object indicates whether the device sends out RAPS alarm related traps.
CIE cienaCesRstpBridgeRootPortLostTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.53	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesRstpBridgeRootPortLostNotification traps to be suppressed.
CIE cienaCesRstpPortBackupTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.48	CienaGlobalState	read-write	Setting this object to 'disabled' cause cienaCesRstpPortBackupNotification traps to be suppressed.
CIE cienaCesRstpPortFlapTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.52	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesRstpPortFlapNotification traps to be suppressed.
CIE cienaCesRstpPortOperEdgeTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.51	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesRstpPortOperEdgeNotification traps to be suppressed.
CIE cienaCesRstpPortPvstBPduReceivedTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.49	CienaGlobalState	read-write	Setting this object to 'disabled' cause cienaCesRstpPvstBpduReceivedNotification traps to be suppressed.
CIE cienaCesRstpPortSelfLoopTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.50	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesRstpSelfLoopNotification traps to be suppressed.
CIE cienaCesSwXgradeCompletionTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.57	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesSwXgradeCompletion traps to be suppressed.
CIE cienaCesSyncInputProtectionGroupTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.69	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesSyncInputProtGroupStateChangeNotification traps to be suppressed.
CIE cienaCesSyncInputProtectionUnitTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.68	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesSyncInputPUStateChangeNotification traps to be suppressed.
CIE cienaCesSyncModuleSlotTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.70	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesSyncModuleSlotStateChangeNotification traps to be suppressed.
CIE cienaCesSystemConfigImproperCmdTrapState	1.3.6.1.4.1.1271.2.2.1.1.1.58	CienaGlobalState	read-write	Setting this object to 'disabled' causes cienaCesImproperCmdInConfigFile traps to be suppressed.

RFC description

Controls notification and trap state for Ciena Convergent Ethernet Switch alarms.

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIENA-CES-NOTIFICATIONS-CONTROL

What Is CIENA-CES-NOTIFICATIONS-CONTROL?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description