CIENA-CES-NOTIFICATIONS-CONTROL :: cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-NOTIFICATIONS-CONTROLcienaCesIPMgmtInterfaceGatewayAddrChangeTrapState

cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState

Module: CIENA-CES-NOTIFICATIONS-CONTROL

OID (symbolic): CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState

OID (numeric): 1.3.6.1.4.1.1271.2.2.1.1.1.32

Node type: OBJECT-TYPE

Type: CienaGlobalState

Access: read-write

Description: Setting this object to 'disabled' causes the IP Gateway change trap to be suppressed.

What is cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState?

This object controls, via a CienaGlobalState value, whether a trap is sent when the management interface's default gateway address changes, as described. The management gateway is the next hop that off-subnet management traffic (like the NMS or a remote SSH session) depends on, so this trap flags a change that can silently cut off remote access even though the local IP address itself is unchanged. An admin troubleshooting an unreachable device after a network reconfiguration would check this trap's history to see whether the gateway, not the box, moved.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.2.1.1.1.32
snmpwalk -v2c -c public <target> CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.2.1.1.1.32.1
snmpget -v2c -c public <target> CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1271.2.2.1.1.1.32.1 s <value>

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.2cienaCesNotificationsCIENA-SMI
1.3.6.1.4.1.1271.2.2.1cienaCesNotificationsControlModuleCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.2.1.1cienaCesNotificationsControlMIBCIENA-CES-NOTIFICATIONS-CONTROL
1.3.6.1.4.1.1271.2.2.1.1.1cienaCesNotificationsControlCIENA-CES-NOTIFICATIONS-CONTROL
1.3.6.1.4.1.1271.2.2.1.1.1.32cienaCesIPMgmtInterfaceGatewayAddrChangeTrapStateCIENA-CES-NOTIFICATIONS-CONTROL