CIENA-CES-NOTIFICATIONS-CONTROL :: cienaCesDataplaneUcastTrapState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-NOTIFICATIONS-CONTROLcienaCesDataplaneUcastTrapState

cienaCesDataplaneUcastTrapState

Module: CIENA-CES-NOTIFICATIONS-CONTROL

OID (symbolic): CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesDataplaneUcastTrapState

OID (numeric): 1.3.6.1.4.1.1271.2.2.1.1.1.35

Node type: OBJECT-TYPE

Type: CienaGlobalState

Access: read-write

Description: Setting this object to 'disabled' causes dataplane unicast threshold exceed/normal traps to be suppressed.

What is cienaCesDataplaneUcastTrapState?

This CienaGlobalState object suppresses or enables the paired 'threshold exceed' and 'threshold normal' traps for unicast traffic load on the dataplane, per its description. These traps fire when unicast forwarding rate crosses a configured high-water mark and again when it falls back under it, giving a two-sided view of a congestion event rather than a single alarm. A capacity-planning team monitoring a heavily subscribed uplink would enable this trap to be alerted the moment unicast traffic pushes the ASIC toward its forwarding limit, and again when the surge subsides.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.2.1.1.1.35
snmpwalk -v2c -c public <target> CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesDataplaneUcastTrapState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.2.1.1.1.35.1
snmpget -v2c -c public <target> CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesDataplaneUcastTrapState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1271.2.2.1.1.1.35.1 s <value>

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesDataplaneUcastTrapState OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.2cienaCesNotificationsCIENA-SMI
1.3.6.1.4.1.1271.2.2.1cienaCesNotificationsControlModuleCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.2.1.1cienaCesNotificationsControlMIBCIENA-CES-NOTIFICATIONS-CONTROL
1.3.6.1.4.1.1271.2.2.1.1.1cienaCesNotificationsControlCIENA-CES-NOTIFICATIONS-CONTROL
1.3.6.1.4.1.1271.2.2.1.1.1.35cienaCesDataplaneUcastTrapStateCIENA-CES-NOTIFICATIONS-CONTROL