CIENA-CES-NOTIFICATIONS-CONTROL :: cienaCesRstpBridgeRootPortLostTrapState

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-NOTIFICATIONS-CONTROLcienaCesRstpBridgeRootPortLostTrapState

cienaCesRstpBridgeRootPortLostTrapState

Module: CIENA-CES-NOTIFICATIONS-CONTROL

OID (symbolic): CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesRstpBridgeRootPortLostTrapState

OID (numeric): 1.3.6.1.4.1.1271.2.2.1.1.1.53

Node type: OBJECT-TYPE

Type: CienaGlobalState

Access: read-write

Description: Setting this object to 'disabled' causes cienaCesRstpBridgeRootPortLostNotification traps to be suppressed.

What is cienaCesRstpBridgeRootPortLostTrapState?

This CienaGlobalState object suppresses or enables the cienaCesRstpBridgeRootPortLostNotification trap, which fires, per its description, when the bridge loses its root port. Losing the root port means the switch has lost its best path toward the RSTP root bridge and must recompute a new one, which can briefly affect every VLAN carried across that switch depending on topology. An engineer managing the spanning-tree root of a large L2 domain would want this trap enabled on non-root switches so a lost uplink toward the root is reported immediately rather than only noticed once downstream convergence delay causes complaints.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.2.1.1.1.53
snmpwalk -v2c -c public <target> CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesRstpBridgeRootPortLostTrapState

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.2.1.1.1.53.1
snmpget -v2c -c public <target> CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesRstpBridgeRootPortLostTrapState.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.1271.2.2.1.1.1.53.1 s <value>

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-NOTIFICATIONS-CONTROL::cienaCesRstpBridgeRootPortLostTrapState OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.2cienaCesNotificationsCIENA-SMI
1.3.6.1.4.1.1271.2.2.1cienaCesNotificationsControlModuleCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.2.1.1cienaCesNotificationsControlMIBCIENA-CES-NOTIFICATIONS-CONTROL
1.3.6.1.4.1.1271.2.2.1.1.1cienaCesNotificationsControlCIENA-CES-NOTIFICATIONS-CONTROL
1.3.6.1.4.1.1271.2.2.1.1.1.53cienaCesRstpBridgeRootPortLostTrapStateCIENA-CES-NOTIFICATIONS-CONTROL