BDCOM-INTERFACES :: bdlocIfInOverrun

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBDCOM-INTERFACESbdlocIfInOverrun

bdlocIfInOverrun

Module: BDCOM-INTERFACES

OID (symbolic): BDCOM-INTERFACES::bdlocIfInOverrun

OID (numeric): 1.3.6.1.4.1.3320.2.2.1.1.14

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Count of input which arrived too quickly for the to hardware receive.

What is bdlocIfInOverrun?

This counter tallies input packets dropped because they arrived faster than the interface hardware could receive and buffer them. Operators use it to identify traffic bursts exceeding interface capacity. Example: bdlocIfInOverrun = 12 means 12 packets were lost to receive overrun; a growing count suggests the upstream link speed exceeds this port's capacity.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.14
snmpwalk -v2c -c public <target> BDCOM-INTERFACES::bdlocIfInOverrun

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.14.1
snmpget -v2c -c public <target> BDCOM-INTERFACES::bdlocIfInOverrun.1

Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-INTERFACES::bdlocIfInOverrun OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3320bdcomBDCOM-SMI
1.3.6.1.4.1.3320.2bdlocalBDCOM-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3320.2.2bdlinterfacesBDCOM-INTERFACES
1.3.6.1.4.1.3320.2.2.1bdlifTableBDCOM-INTERFACES
1.3.6.1.4.1.3320.2.2.1.1bdlifEntryBDCOM-INTERFACES
1.3.6.1.4.1.3320.2.2.1.1.14bdlocIfInOverrunBDCOM-INTERFACES