All MIBs › BDCOM-INTERFACES › bdlocIfInCRC
bdlocIfInCRC
Module: BDCOM-INTERFACES
OID (symbolic): BDCOM-INTERFACES::bdlocIfInCRC
OID (numeric): 1.3.6.1.4.1.3320.2.2.1.1.12
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Number of input packets which had cyclic redundancy checksum errors.
What is bdlocIfInCRC?
This counter tracks input packets with cyclic redundancy check (CRC) failures, indicating bit corruption in transit. Operators use it to identify physical layer quality issues. Example: bdlocIfInCRC = 42 means 42 packets arrived with CRC errors; a growing count suggests cable damage, electrical interference, or a failing port.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.12 snmpwalk -v2c -c public <target> BDCOM-INTERFACES::bdlocIfInCRC
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.12.1 snmpget -v2c -c public <target> BDCOM-INTERFACES::bdlocIfInCRC.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-INTERFACES::bdlocIfInCRC OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.2 | bdlinterfaces | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.1 | bdlifTable | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.1.1 | bdlifEntry | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.1.1.12 | bdlocIfInCRC | BDCOM-INTERFACES |