BDCOM-INTERFACES :: bdlocIfRestarts

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsBDCOM-INTERFACESbdlocIfRestarts

bdlocIfRestarts

Module: BDCOM-INTERFACES

OID (symbolic): BDCOM-INTERFACES::bdlocIfRestarts

OID (numeric): 1.3.6.1.4.1.3320.2.2.1.1.18

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: Number of times interface needed to be completely restarted.

What is bdlocIfRestarts?

This counter tallies the number of times the interface was completely restarted (brought down and back up), which is more severe than an internal reset. Network admins use it to track port reliability. Example: bdlocIfRestarts = 1 indicates the port was completely restarted once; if this increments frequently, the port should be replaced or the connected device debugged.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.18
snmpwalk -v2c -c public <target> BDCOM-INTERFACES::bdlocIfRestarts

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.18.1
snmpget -v2c -c public <target> BDCOM-INTERFACES::bdlocIfRestarts.1

Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-INTERFACES::bdlocIfRestarts OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.3320bdcomBDCOM-SMI
1.3.6.1.4.1.3320.2bdlocalBDCOM-SMI
Numeric OIDNameModule
1.3.6.1.4.1.3320.2.2bdlinterfacesBDCOM-INTERFACES
1.3.6.1.4.1.3320.2.2.1bdlifTableBDCOM-INTERFACES
1.3.6.1.4.1.3320.2.2.1.1bdlifEntryBDCOM-INTERFACES
1.3.6.1.4.1.3320.2.2.1.1.18bdlocIfRestartsBDCOM-INTERFACES