All MIBs › BDCOM-INTERFACES › bdlocIfFSIPcts
bdlocIfFSIPcts
Module: BDCOM-INTERFACES
OID (symbolic): BDCOM-INTERFACES::bdlocIfFSIPcts
OID (numeric): 1.3.6.1.4.1.3320.2.2.2.1.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Is the CTS signal up or down
What is bdlocIfFSIPcts?
This enumeration indicates the status of the CTS (Clear To Send) signal on the FSIP line: up(2) when the remote end is ready or down(3) when not. Operators use it to detect handshaking failures. Example: bdlocIfFSIPcts = down(3) indicates CTS is not asserted, meaning the remote device is not ready to receive; transmission is blocked.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.2.1.4 snmpwalk -v2c -c public <target> BDCOM-INTERFACES::bdlocIfFSIPcts
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.2.1.4.1 snmpget -v2c -c public <target> BDCOM-INTERFACES::bdlocIfFSIPcts.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-INTERFACES::bdlocIfFSIPcts OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.2 | bdlinterfaces | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.2 | bdlFSIPTable | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.2.1 | bdlFSIPEntry | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.2.1.4 | bdlocIfFSIPcts | BDCOM-INTERFACES |