All MIBs › BDCOM-INTERFACES › bdlocIfInFrame
bdlocIfInFrame
Module: BDCOM-INTERFACES
OID (symbolic): BDCOM-INTERFACES::bdlocIfInFrame
OID (numeric): 1.3.6.1.4.1.3320.2.2.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Number of input packet which were misaligned.
What is bdlocIfInFrame?
This counter counts input packets with framing alignment errors, where the data does not align with frame boundaries. Network admins use it to diagnose synchronization problems. Example: bdlocIfInFrame = 8 indicates 8 misaligned input packets; if this grows, it suggests a speed mismatch (e.g., 10Mbps device on a 100Mbps port) or serial line configuration error.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.13 snmpwalk -v2c -c public <target> BDCOM-INTERFACES::bdlocIfInFrame
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.3320.2.2.1.1.13.1 snmpget -v2c -c public <target> BDCOM-INTERFACES::bdlocIfInFrame.1
Start monitoring BDCOM networking equipment (switches/routers) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the BDCOM-INTERFACES::bdlocIfInFrame OID value, configure state conditions and alerts, and monitor any BDCOM networking equipment (switches/routers) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.3320 | bdcom | BDCOM-SMI |
| 1.3.6.1.4.1.3320.2 | bdlocal | BDCOM-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.3320.2.2 | bdlinterfaces | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.1 | bdlifTable | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.1.1 | bdlifEntry | BDCOM-INTERFACES |
| 1.3.6.1.4.1.3320.2.2.1.1.13 | bdlocIfInFrame | BDCOM-INTERFACES |