55 modules in Technology: Routing
| Module | Description |
|---|---|
| CISCOSB-ippreflist-MIB | Manages IP prefix lists used for route filtering on Cisco Small Business routing platforms. |
| CISCOSB-IpRouter | Configures and monitors IP routing functions and static routes on Cisco Small Business devices. |
| CISCOSB-Redistribute | Controls route redistribution between routing protocols on Cisco Small Business routing devices. |
| CTRON-AppleTalk-ROUTER-MIB | Manages AppleTalk routing tables, zones, and protocol statistics on Cabletron routers. |
| Dell-3SW2SWTABLES-MIB | Manages Layer 3 to Layer 2 switching table mappings on Dell networking devices. |
| DLINK-3100-IP | Manages IP layer configuration and statistics including routing, interfaces, and address management on D-Link 3100 series switches. |
| DLINK-3100-IpRouter | Configures and monitors IP routing functions including static routes, routing tables, and forwarding on D-Link 3100 series switches. |
| DNOS-BGP-MIB | Extends Border Gateway Protocol (BGP) management with Dell DNOS-specific objects for routing policy and peering. |
| DNOS-NSF-MIB | Manages Non-Stop Forwarding (NSF) and graceful restart capabilities on Dell DNOS routing platforms. |
| DNOS-ROUTE-POLICY-MIB | Manages route policy and route map configuration for routing protocol filtering on Dell DNOS devices. |
| DNOS-ROUTING-MIB | Manages IPv4 routing configuration, routing tables, and protocol instances on Dell DNOS switching platforms. |
| DNOS-ROUTING6-MIB | On Dell DNOS switching platforms, covers IPv6 routing tables, protocol instances, and related configuration. |
| EdgeSwitch-ROUTING-MIB | Ubiquiti EdgeSwitch routing MIB for managing IPv4 static routes, routing tables, and layer-3 forwarding configuration. |
| ELTEX-IP-OSPF-IF-MIB | Eltex OSPF interface MIB providing per-interface OSPF configuration and state monitoring on Eltex routing platforms. |
| EXTREME-OSPF-MIB | Extreme Networks MIB providing vendor-specific extensions to OSPF management, augmenting standard OSPF MIBs on ExtremeXOS routers. |
| EXTREME-OSPFV3-MIB | On ExtremeXOS platforms, this Extreme Networks MIB adds vendor-specific extensions for managing OSPFv3 (IPv6) routing. |
| F10-FIB-MIB | Dell Force10 MIB for the Forwarding Information Base (FIB), exposing IPv4 and IPv6 routing table entries programmed to hardware. |
| F10-ISIS-MIB | Dell Force10 MIB for IS-IS routing protocol management and statistics on Dell Force10/FTOS networking platforms. |
| F3-L3-MIB | ADVA Optical Networking F3 platform MIB for Layer 3 routing configuration including IP interfaces and static routes on FSP 150. |
| FASTPATH-MULTICAST-MIB | Broadcom FastPath MIB for IP multicast routing and IGMP/MLD snooping configuration on FastPath-based switches. |
| FASTPATH-NSF-MIB | Broadcom FastPath MIB for Non-Stop Forwarding (NSF) and graceful restart configuration for routing protocol high availability. |
| FASTPATH-ROUTING-MIB | Broadcom FastPath private MIB for IPv4 routing configuration including ARP, OSPF, RIP, and VRRP parameters on FastPath switches. |
| FOUNDRY-BFD-STD-MIB | Brocade Foundry BFD (Bidirectional Forwarding Detection) MIB providing session state and diagnostic monitoring for fast link failure detection. |
| FOUNDRY-BGP4V2-MIB | Brocade Foundry BGP4 version 2 MIB providing enhanced BGP peer, prefix, and route management objects for FastIron routing platforms. |
| FOUNDRY-SN-BGP4-GROUP-MIB | Brocade Foundry BGP4 group MIB providing BGP routing policy, neighbor configuration, and route advertisement management for FastIron routers. |
| FOUNDRY-SN-IP-MIB | Brocade Foundry IP MIB providing IPv4 routing, interface, and forwarding table management objects for FastIron Layer 3 switches and routers. |
| FOUNDRY-SN-OSPF-GROUP-MIB | A Brocade Foundry MIB for FastIron routers covering OSPF configuration along with neighbor adjacency and LSA management. |
| FOUNDRY-SN-RT-L3-SWITCH-GROUP-MIB | Brocade Foundry Layer 3 switch routing group MIB providing routing table, interface, and protocol management for FastIron L3 switching platforms. |
| H3C-PBR-MIB | H3C MIB for Policy-Based Routing (PBR) managing route policies that forward packets based on match criteria. |
| H3C-RCR-MIB | H3C MIB for Route Change Reporting (RCR) notifying management systems of routing table modifications. |
| H3C-UNICAST-MIB | H3C MIB for unicast routing management including route policies, load balancing, and routing table monitoring. |
| HH3C-OSPF-MIB | HH3C vendor extension MIB for OSPF routing protocol configuration and state beyond standard OSPF MIBs. |
| HH3C-PBR-MIB | HH3C MIB for Policy-Based Routing (PBR) configuration and operational status on H3C devices. |
| HH3C-UNICAST-MIB | An HH3C MIB covering unicast routing management, including route policy and unicast forwarding configuration. |
| HIRSCHMANN-MMP4-ROUTING-MIB | Hirschmann MMP4 routing MIB for Layer 3 routing configuration on Hirschmann MMP4 managed industrial switches. |
| HM2-NETCONFIG-MIB | Hirschmann HiOS (HM2) network configuration MIB for IP addressing, interface, and routing configuration. |
| HM2-PLATFORM-ROUTING-MIB | Hirschmann HiOS (HM2) platform routing MIB for static and dynamic routing protocol configuration. |
| HPN-ICF-OSPF-MIB | Manages OSPF area, interface, neighbor, and route parameters extending RFC 1850 on HP/Comware routers. |
| HPN-ICF-PBR-MIB | Manages Policy-Based Routing (PBR) route-map rules and next-hop configuration on HP/Comware routers. |
| HPN-ICF-UNICAST-MIB | Manages unicast routing policy, ECMP load sharing, and route table parameters on HP/Comware routers. |
| JACOBS-RPL-MIB | Defines managed objects for the RPL (Routing Protocol for Low-Power and Lossy Networks) as implemented in research networks at Jacobs University Bremen. |
| Juniper-BGP-MIB | Provides managed objects for Border Gateway Protocol (BGP) peer sessions, route statistics, and policy application on Juniper E-series platforms. |
| Juniper-DVMRP-MIB | Provides managed objects for Distance Vector Multicast Routing Protocol (DVMRP) on Juniper Networks E-series routers. |
| Juniper-IP-POLICY-MIB | Provides managed objects for IP route policy configuration, filter lists, and policy statistics on Juniper Networks E-series routers. |
| JUNIPER-IPFORWARD-MIB | Defines managed objects for IP unicast and multicast forwarding table management on Juniper Networks routing platforms. |
| Juniper-ISIS-MIB | Provides managed objects for IS-IS (Intermediate System to Intermediate System) routing protocol adjacencies and statistics on Juniper E-series routers. |
| JUNIPER-LDP-MIB | Defines managed objects for Label Distribution Protocol (LDP) sessions, LSPs, and label bindings on Juniper Networks MPLS platforms. |
| Juniper-RIP-CONF | Juniper Networks conformance statements for Routing Information Protocol (RIP) management on Juniper E-series edge routers. |
| Juniper-Router-CONF | Juniper Networks conformance statements for the virtual router management framework on Juniper E-series edge routers. |
| Juniper-ROUTER-MIB | Juniper Networks MIB for managing virtual router instances, routing contexts, and associated interfaces on Juniper E-series platforms. |
| JUNIPER-RTM-MIB | Juniper Networks MIB for Real-Time Monitor (RTM) providing routing table statistics and forwarding information on Juniper platforms. |
| LUMINOUS-ROUTING-MIB | Luminous Networks MIB providing IP routing table and protocol management objects for Luminous metro Ethernet devices. |
| MARVELL-PBR-MIB | Marvell Inc. Policy-Based Routing (PBR) MIB defining route map and policy rule management objects for traffic steering on Marvell switches. |
| MARVELL-ROUTEMAP-MIB | Marvell Computer Communications route map MIB defining policy routing and route redistribution configuration objects for Marvell-based routers. |
| ME1200-IP-MIB | Cisco ME1200 Metro Ethernet switch MIB defining IP interface, routing, and address management objects. |