FOUNDRY-SN-BGP4-GROUP-MIB

All MIBs › FOUNDRY-SN-BGP4-GROUP-MIB

Category: Protocol: BGP, Technology: Routing, Vendor: Foundry/Brocade

Description: Brocade Foundry BGP4 group MIB providing BGP routing policy, neighbor configuration, and route advertisement management for FastIron routers.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FOUNDRY-SN-BGP4-GROUP-MIB?

FOUNDRY-SN-BGP4-GROUP-MIB is a Brocade/Foundry proprietary MIB extending BGP4 management on FastIron routers with address filtering and route aggregation policy objects. It exposes an address filter table controlling which prefixes are permitted or denied, and an aggregate address table defining summarized routes advertised by the router. Its monitoring value is in routing-policy/software-configuration state: confirming filter rules and aggregates are correctly applied, rather than hardware condition. It complements the standard BGP4-MIB (RFC 4273) rather than replacing it, adding Foundry-specific policy controls. It is used on FastIron-based routers running BGP4 at ISP or enterprise WAN edges. Engineers can download the FOUNDRY-SN-BGP4-GROUP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FOUNDRY-SN-BGP4-GROUP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Brocade/Foundry FastIron router

Monitoring Examples

The snBgp4AddrFilterTable (snBgp4AddrFilterIndex, snBgp4AddrFilterSourceIp/DestIp, snBgp4AddrFilterAction) lets an admin audit exactly which prefixes are permitted or denied on a BGP peering, while snBgp4AggregateAddrTable confirms configured route aggregates are active; an unexpected filter action or a missing aggregate entry would reveal a route leak or an incomplete summarization policy.

What Can Be Monitored

BGP address filter rules and actions
BGP aggregate address entries
source/destination IP filter criteria
BGP general configuration state

Imported Objects

From FOUNDRY-SN-ROOT-MIB

snBgp4

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
snBgp4Gen	1.3.6.1.4.1.1991.1.2.11.1
INT snBgp4GenAlwaysCompareMed	1.3.6.1.4.1.1991.1.2.11.1.1	INTEGER	read-write	To enable/disable the comparison of the Multi-Exit Discriminator for paths from neighbors in different AS.
INT snBgp4GenAutoSummary	1.3.6.1.4.1.1991.1.2.11.1.2	INTEGER	read-write	To enable/disable the default behavior of automatic summarization of subnet routes into network-level routes.
INT snBgp4GenDefaultLocalPreference	1.3.6.1.4.1.1991.1.2.11.1.3	INTEGER	read-write	To set the default local preference attribute.
INT snBgp4GenDefaultInfoOriginate	1.3.6.1.4.1.1991.1.2.11.1.4	INTEGER	read-write	To enable/disable the default Information Originate.
INT snBgp4GenFastExternalFallover	1.3.6.1.4.1.1991.1.2.11.1.5	INTEGER	read-write	To enable/disable an action of immediately reset the BGP sessions of any directly adjacent external neighbors if the link used to reach them goes down.
INT snBgp4GenNextBootNeighbors	1.3.6.1.4.1.1991.1.2.11.1.6	INTEGER	read-write	The next-boot configured number of neighbors in a BGP Peer Group. The minimum value of this MIB is snBgp4GenMinNeighbors. The maximum value of this MIB is snBgp4GenMaxNeighbors.
INT snBgp4GenNextBootRoutes	1.3.6.1.4.1.1991.1.2.11.1.7	INTEGER	read-write	The next-boot configured number of Routes. The minimum value of this MIB is snBgp4GenMinRoutes. The maximum value of this MIB is snBgp4GenMaxRoutes.
INT snBgp4GenSynchronization	1.3.6.1.4.1.1991.1.2.11.1.8	INTEGER	read-write	To enable/disable the synchronization between BGP and your IGP.
INT snBgp4GenKeepAliveTime	1.3.6.1.4.1.1991.1.2.11.1.9	INTEGER	read-write	The Keep alive timer.
INT snBgp4GenHoldTime	1.3.6.1.4.1.1991.1.2.11.1.10	INTEGER	read-write	The Hold time timer.
IP snBgp4GenRouterId	1.3.6.1.4.1.1991.1.2.11.1.11	IpAddress	read-write	BGP Router Id.
OCT snBgp4GenTableMap	1.3.6.1.4.1.1991.1.2.11.1.12	OCTET STRING	read-write	An octet string of the route-map name, each character of the name is represented by one octet.
INT snBgp4GenAdminStat	1.3.6.1.4.1.1991.1.2.11.1.13	INTEGER	read-write	The administrative status of BGP4 in the router. The value 'enabled' denotes that the BGP4 routing is active in this router; 'disabled' disables BGP4 routing on this router.
INT snBgp4GenDefaultMetric	1.3.6.1.4.1.1991.1.2.11.1.14	INTEGER	read-write	To set default metric values for the BGP4 protocol.
INT snBgp4GenMaxNeighbors	1.3.6.1.4.1.1991.1.2.11.1.15	INTEGER	read-only	The maximum number of neighbors can be configured in a BGP Peer Group.
INT snBgp4GenMinNeighbors	1.3.6.1.4.1.1991.1.2.11.1.16	INTEGER	read-only	The minimum number of neighbors can be configured in a BGP Peer Group.
INT snBgp4GenMaxRoutes	1.3.6.1.4.1.1991.1.2.11.1.17	INTEGER	read-only	The maximum configured number of Routes.
INT snBgp4GenMinRoutes	1.3.6.1.4.1.1991.1.2.11.1.18	INTEGER	read-only	The minimum configured number of Routes.
INT snBgp4GenMaxAddrFilters	1.3.6.1.4.1.1991.1.2.11.1.19	INTEGER	read-only	The maximum configured number of BGP4 address filters.
INT snBgp4GenMaxAggregateAddresses	1.3.6.1.4.1.1991.1.2.11.1.20	INTEGER	read-only	The maximum configured number of BGP4 aggregate addresses.
INT snBgp4GenMaxAsPathFilters	1.3.6.1.4.1.1991.1.2.11.1.21	INTEGER	read-only	The maximum configured number of BGP4 AS-PATH filters.
INT snBgp4GenMaxCommunityFilters	1.3.6.1.4.1.1991.1.2.11.1.22	INTEGER	read-only	The maximum configured number of BGP4 Community filters.
INT snBgp4GenMaxNetworks	1.3.6.1.4.1.1991.1.2.11.1.23	INTEGER	read-only	The maximum configured number of BGP4 Networks.
INT snBgp4GenMaxRouteMapFilters	1.3.6.1.4.1.1991.1.2.11.1.24	INTEGER	read-only	The maximum configured number of BGP4 Route-map Filters.
INT snBgp4GenNeighPrefixMinValue	1.3.6.1.4.1.1991.1.2.11.1.25	INTEGER	read-only	The minimum configured value of BGP4 Neighbor Prefix.
INT snBgp4GenOperNeighbors	1.3.6.1.4.1.1991.1.2.11.1.26	INTEGER	read-only	The current operational max number of neighbors configured for a BGP Group.
INT snBgp4GenOperRoutes	1.3.6.1.4.1.1991.1.2.11.1.27	INTEGER	read-only	The current operational number of Routes.
INT snBgp4GenLocalAs	1.3.6.1.4.1.1991.1.2.11.1.28	INTEGER	read-write	Bgp4 local autonomous system number.
INT snBgp4GenRoutesInstalled	1.3.6.1.4.1.1991.1.2.11.1.29	INTEGER	read-only	Bgp4 installed routes.
INT snBgp4GenAsPathInstalled	1.3.6.1.4.1.1991.1.2.11.1.30	INTEGER	read-only	Bgp4 installed autonomous system path.
INT snBgp4ExternalDistance	1.3.6.1.4.1.1991.1.2.11.1.31	INTEGER	read-write	Administrative distance for BGP external routes.
INT snBgp4InternalDistance	1.3.6.1.4.1.1991.1.2.11.1.32	INTEGER	read-write	Administrative distance for BGP internal routes.
INT snBgp4LocalDistance	1.3.6.1.4.1.1991.1.2.11.1.33	INTEGER	read-write	Administrative distance for BGP local routes.
INT snBgp4OperNumOfAttributes	1.3.6.1.4.1.1991.1.2.11.1.34	INTEGER	read-only	The operational number of attribute entries.
INT snBgp4NextBootMaxAttributes	1.3.6.1.4.1.1991.1.2.11.1.35	INTEGER	read-write	The next boot maximum attribute entries. 10000 means reset to default.
INT snBgp4ClusterId	1.3.6.1.4.1.1991.1.2.11.1.36	INTEGER	read-write	A cluster ID which is represented by 4 bytes unsigned integer (0..0xFFFFFFFF). 0 means reset to default.
INT snBgp4ClientToClientReflection	1.3.6.1.4.1.1991.1.2.11.1.37	INTEGER	read-write	To enable/disable the client to client reflection in BGP4.
INT snBgp4GenTotalNeighbors	1.3.6.1.4.1.1991.1.2.11.1.38	INTEGER	read-only	The current total number of neighbors running in a BGP Group.
INT snBgp4GenMaxPaths	1.3.6.1.4.1.1991.1.2.11.1.39	INTEGER	read-write	The maximum configured number of Paths.
INT snBgp4GenConfedId	1.3.6.1.4.1.1991.1.2.11.1.40	INTEGER	read-write	Bgp4 Confederation Id.
OCT snBgp4GenConfedPeers	1.3.6.1.4.1.1991.1.2.11.1.41	OCTET STRING	read-write	An AS number from 1 to 0xFFFF construct confederation peers. There are 50(max peers) of them. This integer number is represented by 2 OCTETs.
INT snBgp4GenDampening	1.3.6.1.4.1.1991.1.2.11.1.42	INTEGER	read-write	The dampening of BGP4 in the router. value 'none' denotes that the BGP4 dampening is off 'parameters' denotes parameters are confibrurable. 'routeMap' denotes routemap is configurable.
INT snBgp4GenDampenHalfLife	1.3.6.1.4.1.1991.1.2.11.1.43	INTEGER	read-write	Bgp4 Dampening Half Life.
INT snBgp4GenDampenReuse	1.3.6.1.4.1.1991.1.2.11.1.44	INTEGER	read-write	Bgp4 Dampening Reuse.
INT snBgp4GenDampenSuppress	1.3.6.1.4.1.1991.1.2.11.1.45	INTEGER	read-write	Bgp4 Dampening Suppress.
INT snBgp4GenDampenMaxSuppress	1.3.6.1.4.1.1991.1.2.11.1.46	INTEGER	read-write	Bgp4 Dampening Max Suppress Time.
OCT snBgp4GenDampenMap	1.3.6.1.4.1.1991.1.2.11.1.47	OCTET STRING	read-write	An octet string of the route-map name for dampening, each character of the name is represented by one octet.
snBgp4AddrFilter	1.3.6.1.4.1.1991.1.2.11.2
snBgp4AddrFilterTable	1.3.6.1.4.1.1991.1.2.11.2.1		not-accessible	Bgp4 Address Filter table.
snBgp4AddrFilterEntry	1.3.6.1.4.1.1991.1.2.11.2.1.1		not-accessible	An entry in the Bgp4 Address Filter table.
INT snBgp4AddrFilterIndex	1.3.6.1.4.1.1991.1.2.11.2.1.1.1	INTEGER	read-only	The table index for a filter entry.
INT snBgp4AddrFilterAction	1.3.6.1.4.1.1991.1.2.11.2.1.1.2	INTEGER	read-write	Action to take if the bgp address match with this filter.
IP snBgp4AddrFilterSourceIp	1.3.6.1.4.1.1991.1.2.11.2.1.1.3	IpAddress	read-write	Source IP address.
IP snBgp4AddrFilterSourceMask	1.3.6.1.4.1.1991.1.2.11.2.1.1.4	IpAddress	read-write	Source IP subnet mask.
IP snBgp4AddrFilterDestIp	1.3.6.1.4.1.1991.1.2.11.2.1.1.5	IpAddress	read-write	Destination IP address.
IP snBgp4AddrFilterDestMask	1.3.6.1.4.1.1991.1.2.11.2.1.1.6	IpAddress	read-write	Destination IP subnet mask.
INT snBgp4AddrFilterRowStatus	1.3.6.1.4.1.1991.1.2.11.2.1.1.7	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4AggregateAddr	1.3.6.1.4.1.1991.1.2.11.3
snBgp4AggregateAddrTable	1.3.6.1.4.1.1991.1.2.11.3.1		not-accessible	Bgp4 Aggregate Address table.
snBgp4AggregateAddrEntry	1.3.6.1.4.1.1991.1.2.11.3.1.1		not-accessible	An entry in the Bgp4 Aggregate Address table.
IP snBgp4AggregateAddrIp	1.3.6.1.4.1.1991.1.2.11.3.1.1.1	IpAddress	read-only	Aggregate Address IP address.
IP snBgp4AggregateAddrMask	1.3.6.1.4.1.1991.1.2.11.3.1.1.2	IpAddress	read-only	Aggregate Address IP subnet mask.
INT snBgp4AggregateAddrOption	1.3.6.1.4.1.1991.1.2.11.3.1.1.3	INTEGER	read-only	address(1), asSet(2), summaryOnly(3), the suppressMap(4), advertiseMap(5), attributeMap(6) are Options for creating an aggregate entry in a BGP routing table.
OCT snBgp4AggregateAddrMap	1.3.6.1.4.1.1991.1.2.11.3.1.1.4	OCTET STRING	read-write	This object associates with the snBgp4AggregateAddrOption and the suppressMap(4), advertiseMap(5), attributeMap(6) of the snBgp4AggregateAddrOption are only two Options for creating an aggregate address map. A SNMP-SET error will be returned for other options. An octet string of the map name, each character of the name is represented by one octet.
INT snBgp4AggregateAddrRowStatus	1.3.6.1.4.1.1991.1.2.11.3.1.1.5	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4AsPathFilter	1.3.6.1.4.1.1991.1.2.11.4
snBgp4AsPathFilterTable	1.3.6.1.4.1.1991.1.2.11.4.1		not-accessible	Bgp4 AS-Path Filter table.
snBgp4AsPathFilterEntry	1.3.6.1.4.1.1991.1.2.11.4.1.1		not-accessible	An entry in the Bgp4 As-path Filter table.
INT snBgp4AsPathFilterIndex	1.3.6.1.4.1.1991.1.2.11.4.1.1.1	INTEGER	read-only	The table index for a filter entry.
INT snBgp4AsPathFilterAction	1.3.6.1.4.1.1991.1.2.11.4.1.1.2	INTEGER	read-write	Action to take if the bgp address match with this filter.
OCT snBgp4AsPathFilterRegExpression	1.3.6.1.4.1.1991.1.2.11.4.1.1.3	OCTET STRING	read-write	Autonomous system in the filter using a regular expression. Each character of the regular expression string is represented by one octet.
INT snBgp4AsPathFilterRowStatus	1.3.6.1.4.1.1991.1.2.11.4.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4CommunityFilter	1.3.6.1.4.1.1991.1.2.11.5
snBgp4CommunityFilterTable	1.3.6.1.4.1.1991.1.2.11.5.1		not-accessible	Bgp4 Community Filter table.
snBgp4CommunityFilterEntry	1.3.6.1.4.1.1991.1.2.11.5.1.1		not-accessible	An entry in the Bgp4 Community Filter table.
INT snBgp4CommunityFilterIndex	1.3.6.1.4.1.1991.1.2.11.5.1.1.1	INTEGER	read-only	The table index for a filter entry.
INT snBgp4CommunityFilterAction	1.3.6.1.4.1.1991.1.2.11.5.1.1.2	INTEGER	read-write	Action to take if the bgp address match with this filter.
OCT snBgp4CommunityFilterCommNum	1.3.6.1.4.1.1991.1.2.11.5.1.1.3	OCTET STRING	read-write	A number from 1 to 0xFFFFFFFF. There are 20 of them. This integer number is represented by 4 OCTETs.
INT snBgp4CommunityFilterInternet	1.3.6.1.4.1.1991.1.2.11.5.1.1.4	INTEGER	read-write	Disabled/Enabled the Internet Community.
INT snBgp4CommunityFilterNoAdvertise	1.3.6.1.4.1.1991.1.2.11.5.1.1.5	INTEGER	read-write	Do not advertise this route to any peer (internal or external).
INT snBgp4CommunityFilterNoExport	1.3.6.1.4.1.1991.1.2.11.5.1.1.6	INTEGER	read-write	Do not advertise this route to an EBGP peer.
INT snBgp4CommunityFilterRowStatus	1.3.6.1.4.1.1991.1.2.11.5.1.1.7	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
INT snBgp4CommunityFilterLocalAs	1.3.6.1.4.1.1991.1.2.11.5.1.1.8	INTEGER	read-write	Send this route to peers in other sub-autonomous systems within the local confederation. Do not advertise this route to an external system.
snBgp4NeighGenCfg	1.3.6.1.4.1.1991.1.2.11.6
snBgp4NeighGenCfgTable	1.3.6.1.4.1.1991.1.2.11.6.1		not-accessible	Bgp4 Neighbor General Configuration table.
snBgp4NeighGenCfgEntry	1.3.6.1.4.1.1991.1.2.11.6.1.1		not-accessible	An entry in the Bgp4 Community Filter table.
IP snBgp4NeighGenCfgNeighIp	1.3.6.1.4.1.1991.1.2.11.6.1.1.1	IpAddress	read-only	The IP Address for a neighbor entry.
INT snBgp4NeighGenCfgAdvertlevel	1.3.6.1.4.1.1991.1.2.11.6.1.1.2	INTEGER	read-write	To set the minimum interval between the sending of BGP routing updates.
INT snBgp4NeighGenCfgDefOriginate	1.3.6.1.4.1.1991.1.2.11.6.1.1.3	INTEGER	read-write	To enable/disable the default originate for this neighbor.
INT snBgp4NeighGenCfgEbgpMultihop	1.3.6.1.4.1.1991.1.2.11.6.1.1.4	INTEGER	read-write	To enable/disable the EBGP Muitihop for this neighbor.
INT snBgp4NeighGenCfgMaxPrefix	1.3.6.1.4.1.1991.1.2.11.6.1.1.5	INTEGER	read-write	To control how many prefixes can be received from a neighbor. The minimum value of the maximum prefix is snBgp4GenNeighPrefixMinValue. The maximum value of the maximum prefix is snBgp4GenOperRoutes.
INT snBgp4NeighGenCfgNextHopSelf	1.3.6.1.4.1.1991.1.2.11.6.1.1.6	INTEGER	read-write	To enable/disable the next-hop processing of BGP updates on the router.
INT snBgp4NeighGenCfgRemoteAs	1.3.6.1.4.1.1991.1.2.11.6.1.1.7	INTEGER	read-write	To specify a neighbor with an autonomous system number(AS).
INT snBgp4NeighGenCfgSendComm	1.3.6.1.4.1.1991.1.2.11.6.1.1.8	INTEGER	read-write	To specify that a COMMUNITES attribute should be sent to a BGP neighbor.
INT snBgp4NeighGenCfgWeight	1.3.6.1.4.1.1991.1.2.11.6.1.1.9	INTEGER	read-write	To assign a weight to a neighbor connection.
OCT snBgp4NeighGenCfgWeightFilterList	1.3.6.1.4.1.1991.1.2.11.6.1.1.10	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
INT snBgp4NeighGenCfgRowStatus	1.3.6.1.4.1.1991.1.2.11.6.1.1.11	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row applyDefault(6)...apply default value to an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
INT snBgp4NeighGenCfgUpdateSrcLpbIntf	1.3.6.1.4.1.1991.1.2.11.6.1.1.12	INTEGER	read-write	To allow internal BGP sessions to use any operational loopback interface (1..8) for TCP connections. Zero interface means to restore the interface assignment to the closest interface, which is called the best local address.
INT snBgp4NeighGenCfgRouteRefClient	1.3.6.1.4.1.1991.1.2.11.6.1.1.13	INTEGER	read-write	To configure the router as a BGP route reflector, enable the specified neighbor as its client. When all the clients are disabled, the local router is no longer a route reflector.
INT snBgp4NeighGenCfgRemovePrivateAs	1.3.6.1.4.1.1991.1.2.11.6.1.1.14	INTEGER	read-write	To enable/disable filtering private AS number.
INT snBgp4NeighGenCfgEbgpMultihopTtl	1.3.6.1.4.1.1991.1.2.11.6.1.1.15	INTEGER	read-write	The EBGP Muitihop TTL for this neighbor.
INT snBgp4NeighGenCfgShutdown	1.3.6.1.4.1.1991.1.2.11.6.1.1.16	INTEGER	read-write	To enable/disable BGP4 Nbr Shutdown.
INT snBgp4NeighGenCfgKeepAliveTime	1.3.6.1.4.1.1991.1.2.11.6.1.1.17	INTEGER	read-write	The Keep alive timer.
INT snBgp4NeighGenCfgHoldTime	1.3.6.1.4.1.1991.1.2.11.6.1.1.18	INTEGER	read-write	The Hold time timer.
OCT snBgp4NeighGenCfgDefOrigMap	1.3.6.1.4.1.1991.1.2.11.6.1.1.19	OCTET STRING	read-write	An octet string of the route-map name, each character of the name is represented by one octet.
OCT snBgp4NeighGenCfgDesc	1.3.6.1.4.1.1991.1.2.11.6.1.1.20	OCTET STRING	read-write	An octet string of the neighbor description.
OCT snBgp4NeighGenCfgPass	1.3.6.1.4.1.1991.1.2.11.6.1.1.21	OCTET STRING	read-write	An octet string of the neighbor Md5 password.
snBgp4NeighDistGroup	1.3.6.1.4.1.1991.1.2.11.7
snBgp4NeighDistGroupTable	1.3.6.1.4.1.1991.1.2.11.7.1		not-accessible	Bgp4 Neighbor Distribute Group table.
snBgp4NeighDistGroupEntry	1.3.6.1.4.1.1991.1.2.11.7.1.1		not-accessible	An entry in the Bgp4 Distribute Group table.
IP snBgp4NeighDistGroupNeighIp	1.3.6.1.4.1.1991.1.2.11.7.1.1.1	IpAddress	read-only	The IP Address for a neighbor entry.
INT snBgp4NeighDistGroupDir	1.3.6.1.4.1.1991.1.2.11.7.1.1.2	INTEGER	read-only	The incoming/outgoing advertisements to which the access list is applied.
OCT snBgp4NeighDistGroupAccessList	1.3.6.1.4.1.1991.1.2.11.7.1.1.3	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
INT snBgp4NeighDistGroupRowStatus	1.3.6.1.4.1.1991.1.2.11.7.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OCT snBgp4NeighDistGroupInFilterList	1.3.6.1.4.1.1991.1.2.11.7.1.1.5	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighDistGroupOutFilterList	1.3.6.1.4.1.1991.1.2.11.7.1.1.6	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighDistGroupInIpAccessList	1.3.6.1.4.1.1991.1.2.11.7.1.1.7	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighDistGroupOutIpAccessList	1.3.6.1.4.1.1991.1.2.11.7.1.1.8	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighDistGroupInPrefixList	1.3.6.1.4.1.1991.1.2.11.7.1.1.9	OCTET STRING	read-write	A Prefix name list.
OCT snBgp4NeighDistGroupOutPrefixList	1.3.6.1.4.1.1991.1.2.11.7.1.1.10	OCTET STRING	read-write	A Prefix name list.
snBgp4NeighFilterGroup	1.3.6.1.4.1.1991.1.2.11.8
snBgp4NeighFilterGroupTable	1.3.6.1.4.1.1991.1.2.11.8.1		not-accessible	Bgp4 Neighbor Filter Group table.
snBgp4NeighFilterGroupEntry	1.3.6.1.4.1.1991.1.2.11.8.1.1		not-accessible	An entry in the Bgp4 Neighbor Filter Group table.
IP snBgp4NeighFilterGroupNeighIp	1.3.6.1.4.1.1991.1.2.11.8.1.1.1	IpAddress	read-only	The IP Address for a neighbor entry.
INT snBgp4NeighFilterGroupDir	1.3.6.1.4.1.1991.1.2.11.8.1.1.2	INTEGER	read-only	The incoming/outgoing advertisements to which the access list is applied.
OCT snBgp4NeighFilterGroupAccessList	1.3.6.1.4.1.1991.1.2.11.8.1.1.3	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
INT snBgp4NeighFilterGroupRowStatus	1.3.6.1.4.1.1991.1.2.11.8.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
OCT snBgp4NeighFilterGroupInFilterList	1.3.6.1.4.1.1991.1.2.11.8.1.1.5	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighFilterGroupOutFilterList	1.3.6.1.4.1.1991.1.2.11.8.1.1.6	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 16 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighFilterGroupInAsPathAccessList	1.3.6.1.4.1.1991.1.2.11.8.1.1.7	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
OCT snBgp4NeighFilterGroupOutAsPathAccessList	1.3.6.1.4.1.1991.1.2.11.8.1.1.8	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
INT snBgp4NeighFilterGroupWeight	1.3.6.1.4.1.1991.1.2.11.8.1.1.9	INTEGER	read-write	To assign a weight to a neighbor filter.
OCT snBgp4NeighFilterGroupWeightAccessList	1.3.6.1.4.1.1991.1.2.11.8.1.1.10	OCTET STRING	read-write	A number from 1 to 0xFFFF. There are 1 of them. This integer number is represented by 2 OCTETs.
snBgp4NeighRouteMap	1.3.6.1.4.1.1991.1.2.11.9
snBgp4NeighRouteMapTable	1.3.6.1.4.1.1991.1.2.11.9.1		not-accessible	Bgp4 Neighbor Route Map table.
snBgp4NeighRouteMapEntry	1.3.6.1.4.1.1991.1.2.11.9.1.1		not-accessible	An entry in the Bgp4 Route Map table.
IP snBgp4NeighRouteMapNeighIp	1.3.6.1.4.1.1991.1.2.11.9.1.1.1	IpAddress	read-only	The IP Address for a neighbor entry.
INT snBgp4NeighRouteMapDir	1.3.6.1.4.1.1991.1.2.11.9.1.1.2	INTEGER	read-only	The incoming/outgoing advertisements to which the access list is applied.
OCT snBgp4NeighRouteMapMapName	1.3.6.1.4.1.1991.1.2.11.9.1.1.3	OCTET STRING	read-write	An octet string of the route-map name, Each character of the name is represented by one octet.
INT snBgp4NeighRouteMapRowStatus	1.3.6.1.4.1.1991.1.2.11.9.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4Network	1.3.6.1.4.1.1991.1.2.11.10
snBgp4NetworkTable	1.3.6.1.4.1.1991.1.2.11.10.1		not-accessible	Bgp4 Network Weight table.
snBgp4NetworkEntry	1.3.6.1.4.1.1991.1.2.11.10.1.1		not-accessible	An entry in the Bgp4 Network Weight table.
IP snBgp4NetworkIp	1.3.6.1.4.1.1991.1.2.11.10.1.1.1	IpAddress	read-only	The IP Address for a network entry.
IP snBgp4NetworkSubnetMask	1.3.6.1.4.1.1991.1.2.11.10.1.1.2	IpAddress	read-only	The subnet mask for a network entry.
INT snBgp4NetworkWeight	1.3.6.1.4.1.1991.1.2.11.10.1.1.3	INTEGER	read-write	To assign a weight to a neighbor connection.
INT snBgp4NetworkBackdoor	1.3.6.1.4.1.1991.1.2.11.10.1.1.4	INTEGER	read-write	To enable/disable the backdoor for this network.
INT snBgp4NetworkRowStatus	1.3.6.1.4.1.1991.1.2.11.10.1.1.5	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4Redis	1.3.6.1.4.1.1991.1.2.11.11
snBgp4RedisTable	1.3.6.1.4.1.1991.1.2.11.11.1		not-accessible	The BGP4 Redistribution contains configurations that could be imported into the BGP4 domain.
snBgp4RedisEntry	1.3.6.1.4.1.1991.1.2.11.11.1.1		not-accessible	The BGP4 Redistribution Entry specifies a particular RIP or , OSPF, or Static route to be imported into the BGP4 domain.
INT snBgp4RedisProtocol	1.3.6.1.4.1.1991.1.2.11.11.1.1.1	INTEGER	read-only	The imported configuration into BGP4 domain is set in the following: rip(1): - the RIP. ospf(2): - the OSPF. static(3): - the static. connected(4): - the connected. isis(5): - the ISIS.
INT snBgp4RedisMetric	1.3.6.1.4.1.1991.1.2.11.11.1.1.2	INTEGER	read-write	The metric of using the specified protocol Metric value.
OCT snBgp4RedisRouteMap	1.3.6.1.4.1.1991.1.2.11.11.1.1.3	OCTET STRING	read-write	An octet string of the route-map name, each character of the name is represented by one octet.
INT snBgp4RedisWeight	1.3.6.1.4.1.1991.1.2.11.11.1.1.4	INTEGER	read-write	To assign a weight for the specified protocol.
INT snBgp4RedisMatchInternal	1.3.6.1.4.1.1991.1.2.11.11.1.1.5	INTEGER	read-write	This object is only applicable to the OSPF protocol.
INT snBgp4RedisMatchExternal1	1.3.6.1.4.1.1991.1.2.11.11.1.1.6	INTEGER	read-write	This object is only applicable to the OSPF protocol.
INT snBgp4RedisMatchExternal2	1.3.6.1.4.1.1991.1.2.11.11.1.1.7	INTEGER	read-write	This object is only applicable to the OSPF protocol.
INT snBgp4RedisRowStatus	1.3.6.1.4.1.1991.1.2.11.11.1.1.8	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4RouteMapFilter	1.3.6.1.4.1.1991.1.2.11.12
snBgp4RouteMapFilterTable	1.3.6.1.4.1.1991.1.2.11.12.1		not-accessible	Bgp4 RouteMap Filter table.
snBgp4RouteMapFilterEntry	1.3.6.1.4.1.1991.1.2.11.12.1.1		not-accessible	An entry in the Bgp4 RouteMap Filter table.
OCT snBgp4RouteMapFilterMapName	1.3.6.1.4.1.1991.1.2.11.12.1.1.1	OCTET STRING	read-only	An octet string of the route-map name, each character of the name is represented by one octet.
INT snBgp4RouteMapFilterSequenceNum	1.3.6.1.4.1.1991.1.2.11.12.1.1.2	INTEGER	read-only	A sequence number for this particular route-map.
INT snBgp4RouteMapFilterAction	1.3.6.1.4.1.1991.1.2.11.12.1.1.3	INTEGER	read-write	Action to take if the bgp address match with this filter.
INT snBgp4RouteMapFilterRowStatus	1.3.6.1.4.1.1991.1.2.11.12.1.1.4	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid
snBgp4RouteMapMatch	1.3.6.1.4.1.1991.1.2.11.13
snBgp4RouteMapMatchTable	1.3.6.1.4.1.1991.1.2.11.13.1		not-accessible	Bgp4 Route Map Set table.
snBgp4RouteMapMatchEntry	1.3.6.1.4.1.1991.1.2.11.13.1.1		not-accessible	An entry in the Bgp4 Route Map Match table.
OCT snBgp4RouteMapMatchMapName	1.3.6.1.4.1.1991.1.2.11.13.1.1.1	OCTET STRING	read-only	An octet string of the route-map name, each character of the name is represented by one octet.
INT snBgp4RouteMapMatchSequenceNum	1.3.6.1.4.1.1991.1.2.11.13.1.1.2	INTEGER	read-only	A sequence number for this particular route-map.
OCT snBgp4RouteMapMatchAsPathFilter	1.3.6.1.4.1.1991.1.2.11.13.1.1.3	OCTET STRING	read-write	A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP autonomous system path access list.
OCT snBgp4RouteMapMatchCommunityFilter	1.3.6.1.4.1.1991.1.2.11.13.1.1.4	OCTET STRING	read-write	A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP community access list.
OCT snBgp4RouteMapMatchAddressFilter	1.3.6.1.4.1.1991.1.2.11.13.1.1.5	OCTET STRING	read-write	A number from 1 to 0xFFFF and there are 10 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
INT snBgp4RouteMapMatchMetric	1.3.6.1.4.1.1991.1.2.11.13.1.1.6	INTEGER	read-write	To match a metric for BGP routes.
OCT snBgp4RouteMapMatchNextHopList	1.3.6.1.4.1.1991.1.2.11.13.1.1.7	OCTET STRING	read-write	A number from 1 to 0xFFFF and there are 16 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP next-hop access list.
INT snBgp4RouteMapMatchRouteType	1.3.6.1.4.1.1991.1.2.11.13.1.1.8	INTEGER	read-write	To match a route-type. Currently only externalType1(2), externalType2(3), internal(4) is supported for SNMP-SET.
OCT snBgp4RouteMapMatchTagList	1.3.6.1.4.1.1991.1.2.11.13.1.1.9	OCTET STRING	read-write	To match a BGP tag access list.
INT snBgp4RouteMapMatchRowMask	1.3.6.1.4.1.1991.1.2.11.13.1.1.10	INTEGER	read-write	This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapMatchEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
OCT snBgp4RouteMapMatchAsPathAccessList	1.3.6.1.4.1.1991.1.2.11.13.1.1.11	OCTET STRING	read-write	A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP autonomous system path access list.
OCT snBgp4RouteMapMatchCommunityList	1.3.6.1.4.1.1991.1.2.11.13.1.1.12	OCTET STRING	read-write	A number from 1 to 0xFFFFFFFF and there are 5 of 4 OCTETs. This integer number is represented by 4 OCTETs. To match a BGP community access list.
OCT snBgp4RouteMapMatchAddressAccessList	1.3.6.1.4.1.1991.1.2.11.13.1.1.13	OCTET STRING	read-write	A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
OCT snBgp4RouteMapMatchAddressPrefixList	1.3.6.1.4.1.1991.1.2.11.13.1.1.14	OCTET STRING	read-write	Prefix list To match a BGP address access list.
OCT snBgp4RouteMapMatchNextHopAccessList	1.3.6.1.4.1.1991.1.2.11.13.1.1.15	OCTET STRING	read-write	A number from 1 to 0xFFFF and there are 5 of 2 OCTETs. This integer number is represented by 2 OCTETs. To match a BGP address access list.
OCT snBgp4RouteMapMatchNextHopPrefixList	1.3.6.1.4.1.1991.1.2.11.13.1.1.16	OCTET STRING	read-write	Prefix list To match a BGP address access list.
snBgp4RouteMapSet	1.3.6.1.4.1.1991.1.2.11.14
snBgp4RouteMapSetTable	1.3.6.1.4.1.1991.1.2.11.14.1		not-accessible	Bgp4 Route Map Set table.
snBgp4RouteMapSetEntry	1.3.6.1.4.1.1991.1.2.11.14.1.1		not-accessible	An entry in the Bgp4 Route Map Set table.
OCT snBgp4RouteMapSetMapName	1.3.6.1.4.1.1991.1.2.11.14.1.1.1	OCTET STRING	read-only	An octet string of the route-map name, each character of the name is represented by one octet.
INT snBgp4RouteMapSetSequenceNum	1.3.6.1.4.1.1991.1.2.11.14.1.1.2	INTEGER	read-only	A sequence number for this particular route-map.
INT snBgp4RouteMapSetAsPathType	1.3.6.1.4.1.1991.1.2.11.14.1.1.3	INTEGER	read-write	To modify an autonomous system path for BGP routes. tag(0) - Converts the tag of a route into an autonomous system path. prepend(1) - Appends the string from snBgp4RouteMapSetAsPathString to the as-path of the route that is matched by the route map.
OCT snBgp4RouteMapSetAsPathString	1.3.6.1.4.1.1991.1.2.11.14.1.1.4	OCTET STRING	read-write	as-path string. This string is used if only if the snBgp4RouteMapSetAsPathCmd was sent together with the value set to prepend(1).
INT snBgp4RouteMapSetAutoTag	1.3.6.1.4.1.1991.1.2.11.14.1.1.5	INTEGER	read-write	To enable/disable the automatic-tag for BGP routes.
INT snBgp4RouteMapSetCommunityType	1.3.6.1.4.1.1991.1.2.11.14.1.1.6	INTEGER	read-write	To set the BGP COMMUNITIES attribute. none means no other community attributes are allowed, nums means allowing community attributesi, the old values 1 and 2 are not valid since 5.03.00
INT snBgp4RouteMapSetCommunityNum	1.3.6.1.4.1.1991.1.2.11.14.1.1.7	INTEGER	read-write	community-number. This number is used if only if the snBgp4RouteMapSetCommunityCmd was sent together with the value set to number(0).
INT snBgp4RouteMapSetCommunityAdditive	1.3.6.1.4.1.1991.1.2.11.14.1.1.8	INTEGER	read-write	To add the community to the already existing communities.
INT snBgp4RouteMapSetLocalPreference	1.3.6.1.4.1.1991.1.2.11.14.1.1.9	INTEGER	read-write	To modify a local-preference for BGP routes.
INT snBgp4RouteMapSetMetric	1.3.6.1.4.1.1991.1.2.11.14.1.1.10	INTEGER	read-write	To modify a metric for BGP routes.
IP snBgp4RouteMapSetNextHop	1.3.6.1.4.1.1991.1.2.11.14.1.1.11	IpAddress	read-write	To modify the IP address of the next hop for BGP routes.
INT snBgp4RouteMapSetOrigin	1.3.6.1.4.1.1991.1.2.11.14.1.1.12	INTEGER	read-write	To set the BGP origin code.
INT snBgp4RouteMapSetTag	1.3.6.1.4.1.1991.1.2.11.14.1.1.13	INTEGER	read-write	To specify the tag for BGP routes.
INT snBgp4RouteMapSetWeight	1.3.6.1.4.1.1991.1.2.11.14.1.1.14	INTEGER	read-write	To specify the BGP weight for the routing table.
INT snBgp4RouteMapSetRowMask	1.3.6.1.4.1.1991.1.2.11.14.1.1.15	INTEGER	read-write	This object is used together with above MIBs in the same VARBIND to set and reset any MIBs in the table. The bit number is referred to the snBgp4RouteMapSetEntry number of each row in the table. The bit is ON - means set, The bit is OFF - means reset
OCT snBgp4RouteMapSetCommunityNums	1.3.6.1.4.1.1991.1.2.11.14.1.1.16	OCTET STRING	read-write	Community number is from 1 to 0xFFFFFFFF. There are 6 of them. This integer number is represented by 4 OCTETs.
INT snBgp4RouteMapSetDampenHalfLife	1.3.6.1.4.1.1991.1.2.11.14.1.1.17	INTEGER	read-write	Bgp4 Route Map Dampening Half Life.
INT snBgp4RouteMapSetDampenReuse	1.3.6.1.4.1.1991.1.2.11.14.1.1.18	INTEGER	read-write	Bgp4 Route Map Dampening Reuse.
INT snBgp4RouteMapSetDampenSuppress	1.3.6.1.4.1.1991.1.2.11.14.1.1.19	INTEGER	read-write	Bgp4 Route Map Dampening Suppress.
INT snBgp4RouteMapSetDampenMaxSuppress	1.3.6.1.4.1.1991.1.2.11.14.1.1.20	INTEGER	read-write	Bgp4 Route Map Dampening Max Suppress Time.
snBgp4NeighOperStatus	1.3.6.1.4.1.1991.1.2.11.15
snBgp4NeighOperStatusTable	1.3.6.1.4.1.1991.1.2.11.15.1		not-accessible	Bgp4 Neighbor Operational Status table.
snBgp4NeighOperStatusEntry	1.3.6.1.4.1.1991.1.2.11.15.1.1		not-accessible	An entry in the Bgp4 Operational Status table.
INT snBgp4NeighOperStatusIndex	1.3.6.1.4.1.1991.1.2.11.15.1.1.1	INTEGER	read-only	The index for a neighbor entry.
IP snBgp4NeighOperStatusIp	1.3.6.1.4.1.1991.1.2.11.15.1.1.2	IpAddress	read-only	The IP Address for a neighbor entry.
INT snBgp4NeighOperStatusRemoteAs	1.3.6.1.4.1.1991.1.2.11.15.1.1.3	INTEGER	read-only	To show a neighbor with an autonomous system number(AS).
INT snBgp4NeighOperStatusBgpType	1.3.6.1.4.1.1991.1.2.11.15.1.1.4	INTEGER	read-only	To show the type of BGP protocol whether is internal or external.
INT snBgp4NeighOperStatusState	1.3.6.1.4.1.1991.1.2.11.15.1.1.5	INTEGER	read-only	To show the state of this neighbor.
INT snBgp4NeighOperStatusKeepAliveTime	1.3.6.1.4.1.1991.1.2.11.15.1.1.6	INTEGER	read-only	The Keep alive timer.
INT snBgp4NeighOperStatusHoldTime	1.3.6.1.4.1.1991.1.2.11.15.1.1.7	INTEGER	read-only	The Hold time timer.
INT snBgp4NeighOperStatusAdvertlevel	1.3.6.1.4.1.1991.1.2.11.15.1.1.8	INTEGER	read-only	To show the minimum interval between the sending of BGP routing updates.
CTR snBgp4NeighOperStatusKeepAliveTxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.9	Counter	read-only	Keep alive message sent counts.
CTR snBgp4NeighOperStatusKeepAliveRxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.10	Counter	read-only	Keep alive message received counts.
CTR snBgp4NeighOperStatusUpdateTxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.11	Counter	read-only	Update message sent counts.
CTR snBgp4NeighOperStatusUpdateRxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.12	Counter	read-only	Update message received counts.
CTR snBgp4NeighOperStatusNotifTxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.13	Counter	read-only	Notification message sent counts.
CTR snBgp4NeighOperStatusNotifRxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.14	Counter	read-only	Notification message received counts.
CTR snBgp4NeighOperStatusOpenTxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.15	Counter	read-only	Open message sent counts.
CTR snBgp4NeighOperStatusOpenRxCounts	1.3.6.1.4.1.1991.1.2.11.15.1.1.16	Counter	read-only	Open message received counts.
snBgp4RouteOperStatus	1.3.6.1.4.1.1991.1.2.11.16
snBgp4RouteOperStatusTable	1.3.6.1.4.1.1991.1.2.11.16.1		not-accessible	Bgp4 Routebor Operational Status table.
snBgp4RouteOperStatusEntry	1.3.6.1.4.1.1991.1.2.11.16.1.1		not-accessible	An entry in the Bgp4 Operational Status table.
INT snBgp4RouteOperStatusIndex	1.3.6.1.4.1.1991.1.2.11.16.1.1.1	INTEGER	read-only	The index for a route entry.
IP snBgp4RouteOperStatusIp	1.3.6.1.4.1.1991.1.2.11.16.1.1.2	IpAddress	read-only	The IP Address for a route entry.
IP snBgp4RouteOperStatusSubnetMask	1.3.6.1.4.1.1991.1.2.11.16.1.1.3	IpAddress	read-only	The IP Subnet Mask for a route entry.
IP snBgp4RouteOperStatusNextHop	1.3.6.1.4.1.1991.1.2.11.16.1.1.4	IpAddress	read-only	The next-hop IP for a route entry.
INT snBgp4RouteOperStatusMetric	1.3.6.1.4.1.1991.1.2.11.16.1.1.5	INTEGER	read-only	To show the metric value of a route entry.
INT snBgp4RouteOperStatusLocalPreference	1.3.6.1.4.1.1991.1.2.11.16.1.1.6	INTEGER	read-only	To show the local preference of a route entry.
INT snBgp4RouteOperStatusWeight	1.3.6.1.4.1.1991.1.2.11.16.1.1.7	INTEGER	read-only	To show the weight of this route.
INT snBgp4RouteOperStatusOrigin	1.3.6.1.4.1.1991.1.2.11.16.1.1.8	INTEGER	read-only	To show the origin of this route.
INT snBgp4RouteOperStatusStatus	1.3.6.1.4.1.1991.1.2.11.16.1.1.9	INTEGER	read-only	A bit array that contains the status of this route. This is a packed bit string; The following shows the meaning of each bit: (bit 0 is the least significant bit and 0=FALSE, 1=TRUE). bit position meaning ------------ ------- 6-31 reserved. 5 aggregate. 4 best. 3 internal. 2 local. 1 suppressed. 0 valid.
INT snBgp4RouteOperStatusRouteTag	1.3.6.1.4.1.1991.1.2.11.16.1.1.10	INTEGER	read-only	To show the route tag of this route.
OCT snBgp4RouteOperStatusCommunityList	1.3.6.1.4.1.1991.1.2.11.16.1.1.11	OCTET STRING	read-only	To show the community list of this route. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
OCT snBgp4RouteOperStatusAsPathList	1.3.6.1.4.1.1991.1.2.11.16.1.1.12	OCTET STRING	read-only	To show the AS Path list of this route. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
snBgp4NeighborSummary	1.3.6.1.4.1.1991.1.2.11.17
snBgp4NeighborSummaryTable	1.3.6.1.4.1.1991.1.2.11.17.1		not-accessible	Bgp4 Routebor Operational Status table.
snBgp4NeighborSummaryEntry	1.3.6.1.4.1.1991.1.2.11.17.1.1		not-accessible	An entry in the Bgp4 Operational Status table.
INT snBgp4NeighborSummaryIndex	1.3.6.1.4.1.1991.1.2.11.17.1.1.1	INTEGER	read-only	The index for a route entry.
IP snBgp4NeighborSummaryIp	1.3.6.1.4.1.1991.1.2.11.17.1.1.2	IpAddress	read-only	The IP Address for a route entry.
INT snBgp4NeighborSummaryState	1.3.6.1.4.1.1991.1.2.11.17.1.1.3	INTEGER	read-only	To show the state of this neighbor.
INT snBgp4NeighborSummaryStateChgTime	1.3.6.1.4.1.1991.1.2.11.17.1.1.4	INTEGER	read-only	The time of a change of the state of this neighbor.
INT snBgp4NeighborSummaryRouteReceived	1.3.6.1.4.1.1991.1.2.11.17.1.1.5	INTEGER	read-only	The number of routes received of this neighbor.
INT snBgp4NeighborSummaryRouteInstalled	1.3.6.1.4.1.1991.1.2.11.17.1.1.6	INTEGER	read-only	The number of routes installed of this neighbor.
snBgp4Attribute	1.3.6.1.4.1.1991.1.2.11.18
snBgp4AttributeTable	1.3.6.1.4.1.1991.1.2.11.18.1		not-accessible	Bgp4 Attribute entries table.
snBgp4AttributeEntry	1.3.6.1.4.1.1991.1.2.11.18.1.1		not-accessible	An entry in the Bgp4 Attribute table.
INT snBgp4AttributeIndex	1.3.6.1.4.1.1991.1.2.11.18.1.1.1	INTEGER	read-only	The index for a route entry.
IP snBgp4AttributeNextHop	1.3.6.1.4.1.1991.1.2.11.18.1.1.2	IpAddress	read-only	The next-hop IP for a route entry.
INT snBgp4AttributeMetric	1.3.6.1.4.1.1991.1.2.11.18.1.1.3	INTEGER	read-only	To show the metric value of a route entry.
INT snBgp4AttributeOrigin	1.3.6.1.4.1.1991.1.2.11.18.1.1.4	INTEGER	read-only	To show the origin of this route.
INT snBgp4AttributeAggregatorAs	1.3.6.1.4.1.1991.1.2.11.18.1.1.5	INTEGER	read-only	The aggregator AS number for an attribute entry.
IP snBgp4AttributeRouterId	1.3.6.1.4.1.1991.1.2.11.18.1.1.6	IpAddress	read-only	The router ID for an attribute entry.
INT snBgp4AttributeAtomicAggregatePresent	1.3.6.1.4.1.1991.1.2.11.18.1.1.7	INTEGER	read-only	The atomic aggregate present in an attribute entry.
INT snBgp4AttributeLocalPreference	1.3.6.1.4.1.1991.1.2.11.18.1.1.8	INTEGER	read-only	To show the local preference of a route entry.
OCT snBgp4AttributeCommunityList	1.3.6.1.4.1.1991.1.2.11.18.1.1.9	OCTET STRING	read-only	To show the community list of this attribute entry. If the community list is an NULL string that means an empty list, then the community is INTERNET. A number from 1 to 0xFFFFFFFF. This integer number is represented by 4 OCTETs. In the community list, it could have some Well-known numbers such as: BGP_COMMUNITY_ATTRIBUTE_NO_EXPORT 0xFFFFFF01 BGP_COMMUNITY_ATTRIBUTE_NO_ADVERTISE 0xFFFFFF02
OCT snBgp4AttributeAsPathList	1.3.6.1.4.1.1991.1.2.11.18.1.1.10	OCTET STRING	read-only	To show the AS Path list of this attribute entry. A number from 1 to 0xFFFF. This integer number is represented by 2 OCTETs.
IP snBgp4AttributeOriginator	1.3.6.1.4.1.1991.1.2.11.18.1.1.11	IpAddress	read-only	The originator IP address for an attribute entry.
OCT snBgp4AttributeClusterList	1.3.6.1.4.1.1991.1.2.11.18.1.1.12	OCTET STRING	read-only	To show the cluster list of this attribute entry. If the cluster list is an NULL string, it means an empty list. Otherwise, the list is a group of cluster ID which is represented by 4 OCTETs IP address.
snBgp4ClearNeighborCmd	1.3.6.1.4.1.1991.1.2.11.19
snBgp4ClearNeighborCmdTable	1.3.6.1.4.1.1991.1.2.11.19.1		not-accessible	Clear Bgp4 command table.
snBgp4ClearNeighborCmdEntry	1.3.6.1.4.1.1991.1.2.11.19.1.1		not-accessible	An entry in the clear Bgp4 neighbor command table.
IP snBgp4ClearNeighborCmdIp	1.3.6.1.4.1.1991.1.2.11.19.1.1.1	IpAddress	read-only	The IP Address for a neighbor entry. If the IP address is 255.255.255.255, it means for all neighbors.
INT snBgp4ClearNeighborCmdElement	1.3.6.1.4.1.1991.1.2.11.19.1.1.2	INTEGER	read-write	To send the command element of this neighbor for value(1) to (5) valid(0) is received in SNMP-get.
snBgp4NeighPrefixGroup	1.3.6.1.4.1.1991.1.2.11.20
snBgp4NeighPrefixGroupTable	1.3.6.1.4.1.1991.1.2.11.20.1		not-accessible	Bgp4 Neighbor Prefix Group table.
snBgp4NeighPrefixGroupEntry	1.3.6.1.4.1.1991.1.2.11.20.1.1		not-accessible	An entry in the Bgp4 Prefix Group table.
IP snBgp4NeighPrefixGroupNeighIp	1.3.6.1.4.1.1991.1.2.11.20.1.1.1	IpAddress	read-only	The IP Address for a neighbor entry.
INT snBgp4NeighPrefixGroupDir	1.3.6.1.4.1.1991.1.2.11.20.1.1.2	INTEGER	read-only	The incoming/outgoing advertisements to which the access list is applied.
OCT snBgp4NeighPrefixGroupInAccessList	1.3.6.1.4.1.1991.1.2.11.20.1.1.3	OCTET STRING	read-write	An in access prefix list name.
OCT snBgp4NeighPrefixGroupOutAccessList	1.3.6.1.4.1.1991.1.2.11.20.1.1.4	OCTET STRING	read-write	An out prefix list name.
INT snBgp4NeighPrefixGroupRowStatus	1.3.6.1.4.1.1991.1.2.11.20.1.1.5	INTEGER	read-write	This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an exsisting row If the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid

RFC description

Foundry Networks (now part of Brocade) vendor MIB for managing BGP4 group policies and configurations.

Start monitoring Brocade/Foundry FastIron routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FOUNDRY-SN-BGP4-GROUP-MIB

What Is FOUNDRY-SN-BGP4-GROUP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description