HIRSCHMANN-MMP4-ROUTING-MIB

All MIBs › HIRSCHMANN-MMP4-ROUTING-MIB

Organization: Hirschmann Automation and Control GmbH

Last Updated: 2005-08-18

Category: Technology: Routing, Technology: Routing/L3, Vendor: Belden

Description: Hirschmann MMP4 routing MIB for Layer 3 routing configuration on Hirschmann MMP4 managed industrial switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HIRSCHMANN-MMP4-ROUTING-MIB?

HIRSCHMANN-MMP4-ROUTING-MIB is a Hirschmann Automation and Control proprietary MIB (extending the standard OSPF-MIB/RIPv2-MIB) managing ARP and IP-interface routing configuration on Hirschmann Platform4 switches/routers. Its objects cover ARP age-out time, response time, max retries, cache size, dynamic-renew flag, current/peak dynamic-entry counts, current/max static-entry counts, an ARP table (age, IP/MAC address, interface, type, status, sparse-learn flag), and IP-routing/VRRP mode with an IP-interface table (ifIndex, IP address, netmask). As a configuration/status MIB it lets an administrator confirm ARP cache capacity and utilization, and IP-interface addressing. It is deployed on Hirschmann Automation and Control Platform4 industrial switches/routers. Engineers can download the HIRSCHMANN-MMP4-ROUTING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HIRSCHMANN-MMP4-ROUTING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Hirschmann Automation and Control Platform4 industrial switches/routers

Monitoring Examples

An administrator checks hmAgentSwitchArpTotalEntryCountCurrent against hmAgentSwitchArpCacheSize to confirm ARP cache headroom before adding more devices to a Hirschmann Platform4 network.

What Can Be Monitored

ARP cache capacity/utilization
IP interface configuration

Imported Objects

From HIRSCHMANN-MMP4-BASICL2-MIB

hmPlatform4

OBJECT-IDENTITY

From OSPF-MIB

ospfIfEntry
ospfVirtIfEntry

From RIPv2-MIB

rip2IfConfEntry

OBJECT-TYPE

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using hmAgentRip2RcvBadPackets OID:

Select a Hirschmann Platform4 industrial switch/router as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hmAgentRip2RcvBadPackets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of bad RIPv2 packets received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hmPlatform4Routing	1.3.6.1.4.1.248.15.2			The Hirschmann Private Platform4 Routing MIB definitions for Platform devices.
hmAgentSwitchArpGroup	1.3.6.1.4.1.248.15.2.1
I32 hmAgentSwitchArpAgeoutTime	1.3.6.1.4.1.248.15.2.1.1	Integer32	read-write	Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
I32 hmAgentSwitchArpResponseTime	1.3.6.1.4.1.248.15.2.1.2	Integer32	read-write	Configures the ARP request response timeout in seconds. Allowable range: 1-10
I32 hmAgentSwitchArpMaxRetries	1.3.6.1.4.1.248.15.2.1.3	Integer32	read-write	Configures the ARP count of maximum request for retries. Allowable range: 0-10
I32 hmAgentSwitchArpCacheSize	1.3.6.1.4.1.248.15.2.1.4	Integer32	read-write	Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific.
INT hmAgentSwitchArpDynamicRenew	1.3.6.1.4.1.248.15.2.1.5	INTEGER	read-write	This indicates the current setting of ARP dynamic renew mode.
G32 hmAgentSwitchArpTotalEntryCountCurrent	1.3.6.1.4.1.248.15.2.1.6	Gauge32	read-only	Current number of entries in the ARP cache.
G32 hmAgentSwitchArpTotalEntryCountPeak	1.3.6.1.4.1.248.15.2.1.7	Gauge32	read-only	Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed.
G32 hmAgentSwitchArpStaticEntryCountCurrent	1.3.6.1.4.1.248.15.2.1.8	Gauge32	read-only	Current number of configured static ARP entries.
I32 hmAgentSwitchArpStaticEntryCountMax	1.3.6.1.4.1.248.15.2.1.9	Integer32	read-only	Maximum number of configurable static ARP entries.
hmAgentSwitchArpTable	1.3.6.1.4.1.248.15.2.1.10		not-accessible	This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
hmAgentSwitchArpEntry	1.3.6.1.4.1.248.15.2.1.10.1		not-accessible	The entry of the hmAgentSwitchArpTable.
TIK hmAgentSwitchArpAge	1.3.6.1.4.1.248.15.2.1.10.1.1	TimeTicks	read-only	This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging.
IP hmAgentSwitchArpIpAddress	1.3.6.1.4.1.248.15.2.1.10.1.2	IpAddress	read-only	The IP Address assigned to each interface.
MAC hmAgentSwitchArpMacAddress	1.3.6.1.4.1.248.15.2.1.10.1.3	MacAddress	read-create	The hardware MAX Address that each interface maps to.
I32 hmAgentSwitchArpInterface	1.3.6.1.4.1.248.15.2.1.10.1.4	Integer32	read-only	The Associated IfIndex which identified the ARP Entry.
INT hmAgentSwitchArpType	1.3.6.1.4.1.248.15.2.1.10.1.5	INTEGER	read-only	The type of ARP entry.
ROW hmAgentSwitchArpStatus	1.3.6.1.4.1.248.15.2.1.10.1.6	RowStatus	read-write	The status of this ARP entry. Setting this object destroy will remove the entry.
INT hmAgentSwitchArpSparseLearn	1.3.6.1.4.1.248.15.2.1.11	INTEGER	read-write	This indicates the current setting of ARP sparse learn mode.
hmAgentSwitchIpGroup	1.3.6.1.4.1.248.15.2.2
INT hmAgentSwitchIpRoutingMode	1.3.6.1.4.1.248.15.2.2.1	INTEGER	read-write	Administratively enables/disables routing on the switch.
INT hmAgentSwitchIpVRRPMode	1.3.6.1.4.1.248.15.2.2.2	INTEGER	read-write	Administratively enables/disables VRRP on the switch.
hmAgentSwitchIpInterfaceTable	1.3.6.1.4.1.248.15.2.2.3		not-accessible	The hmAgentSwitchIpInterfaceTable.
hmAgentSwitchIpInterfaceEntry	1.3.6.1.4.1.248.15.2.2.3.1		not-accessible	The entry of the hmAgentSwitchIpInterfaceTable.
I32 hmAgentSwitchIpInterfaceIfIndex	1.3.6.1.4.1.248.15.2.2.3.1.1	Integer32	read-only	The IfIndex associated with this instance.
IP hmAgentSwitchIpInterfaceIpAddress	1.3.6.1.4.1.248.15.2.2.3.1.2	IpAddress	read-write	The IpAddress assigned to this interface. When setting this value, the value of hmAgentSwitchIpInterfaceNetMask must be set at the same time.
IP hmAgentSwitchIpInterfaceNetMask	1.3.6.1.4.1.248.15.2.2.3.1.3	IpAddress	read-write	The NetMask assigned to this interface. When setting this value, the value of hmAgentSwitchIpInterfaceIpAddress must be set at the same time.
INT hmAgentSwitchIpInterfaceClearIp	1.3.6.1.4.1.248.15.2.2.3.1.4	INTEGER	read-write	Sets the interface's primary IpAddress and NetMask back to 0.0.0.0. The primary ip address can be removed if and only if there are no configured secondary addresses.
INT hmAgentSwitchIpInterfaceRoutingMode	1.3.6.1.4.1.248.15.2.2.3.1.5	INTEGER	read-write	Enables or disables routing for this interface.
INT hmAgentSwitchIpInterfaceProxyARPMode	1.3.6.1.4.1.248.15.2.2.3.1.6	INTEGER	read-write	Enables or disables Proxy ARP for this interface.
U32 hmAgentSwitchIpInterfaceMtuValue	1.3.6.1.4.1.248.15.2.2.3.1.7	Unsigned32	read-write	Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if routing is enabled.
I32 hmAgentSwitchIpInterfaceSlotNum	1.3.6.1.4.1.248.15.2.2.3.1.8	Integer32	read-only	The Slot Number associated with this instance.
I32 hmAgentSwitchIpInterfacePortNum	1.3.6.1.4.1.248.15.2.2.3.1.9	Integer32	read-only	The Port Number associated with this instance.
INT hmAgentSwitchIpInterfaceNetdirectedBCMode	1.3.6.1.4.1.248.15.2.2.3.1.10	INTEGER	read-write	Enables or disables netdirected broadcasts for this interface.
hmAgentSwitchIpRouterDiscoveryTable	1.3.6.1.4.1.248.15.2.2.4		not-accessible	There is no global administrative flag for router discovery. The global routing flag (hmAgentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
hmAgentSwitchIpRouterDiscoveryEntry	1.3.6.1.4.1.248.15.2.2.4.1		not-accessible	The entry of the hmAgentSwitchIpRouterDiscoveryTable.
I32 hmAgentSwitchIpRouterDiscoveryIfIndex	1.3.6.1.4.1.248.15.2.2.4.1.1	Integer32	read-only	Interface Number to configure Router Discovery on.
INT hmAgentSwitchIpRouterDiscoveryAdvertiseMode	1.3.6.1.4.1.248.15.2.2.4.1.2	INTEGER	read-write	Enable or disable router discovery on the interface.
I32 hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval	1.3.6.1.4.1.248.15.2.2.4.1.3	Integer32	read-write	Maximum time allowed between sending router advertisements from the interface.
I32 hmAgentSwitchIpRouterDiscoveryMinAdvertisementInterval	1.3.6.1.4.1.248.15.2.2.4.1.4	Integer32	read-write	Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
I32 hmAgentSwitchIpRouterDiscoveryAdvertisementLifetime	1.3.6.1.4.1.248.15.2.2.4.1.5	Integer32	read-write	Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to hmAgentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
I32 hmAgentSwitchIpRouterDiscoveryPreferenceLevel	1.3.6.1.4.1.248.15.2.2.4.1.6	Integer32	read-write	Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
IP hmAgentSwitchIpRouterDiscoveryAdvertisementAddress	1.3.6.1.4.1.248.15.2.2.4.1.7	IpAddress	read-write	Address used when sending router advertisements from the interface.
hmAgentSwitchIpVlanTable	1.3.6.1.4.1.248.15.2.2.5		not-accessible	The hmAgentSwitchIpVlanTable.
hmAgentSwitchIpVlanEntry	1.3.6.1.4.1.248.15.2.2.5.1		not-accessible	A Static VLAN for which routing can be enabled/disabled.
I32 hmAgentSwitchIpVlanId	1.3.6.1.4.1.248.15.2.2.5.1.1	Integer32	read-only	The Vlan's Id.
I32 hmAgentSwitchIpVlanIfIndex	1.3.6.1.4.1.248.15.2.2.5.1.2	Integer32	read-only	The IfIndex associated with this VLAN.
ROW hmAgentSwitchIpVlanRoutingStatus	1.3.6.1.4.1.248.15.2.2.5.1.3	RowStatus	read-create	Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
hmAgentSwitchSecondaryAddressTable	1.3.6.1.4.1.248.15.2.2.6		not-accessible	Contains a list of secondary IP Addresses associated with an interface.
hmAgentSwitchSecondaryAddressEntry	1.3.6.1.4.1.248.15.2.2.6.1		not-accessible	A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the hmAgentSwitchIpInterfaceTable.
IP hmAgentSwitchSecondaryIpAddress	1.3.6.1.4.1.248.15.2.2.6.1.1	IpAddress	not-accessible	The Secondary IP Address assigned to this interface.
IP hmAgentSwitchSecondaryNetMask	1.3.6.1.4.1.248.15.2.2.6.1.2	IpAddress	read-create	The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed.
ROW hmAgentSwitchSecondaryStatus	1.3.6.1.4.1.248.15.2.2.6.1.3	RowStatus	read-create	Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The hmAgentSwitchSecondaryNetMask object must be set during creation. destroy(6) - Removes the associated address from the interface.
hmAgentSwitchIpRoutePreferenceTable	1.3.6.1.4.1.248.15.2.2.7		not-accessible	This table contains the MIB objects required to configure the preferences/ administrative distances for the various routing protocols:
hmAgentSwitchIpRoutePreferenceEntry	1.3.6.1.4.1.248.15.2.2.7.1		not-accessible	The entry of the hmAgentSwitchIpRoutePreferenceTable.
INT hmAgentSwitchIpRoutePreferenceSource	1.3.6.1.4.1.248.15.2.2.7.1.1	INTEGER	read-only	Routing protocol for which this entry belongs
I32 hmAgentSwitchIpRoutePreferenceValue	1.3.6.1.4.1.248.15.2.2.7.1.2	Integer32	read-write	Adminstrative distance for this routing protocol.
hmAgentSwitchIpRouteStaticTable	1.3.6.1.4.1.248.15.2.2.8		not-accessible	......
hmAgentSwitchIpRouteStaticEntry	1.3.6.1.4.1.248.15.2.2.8.1		not-accessible	The entry of the hmAgentSwitchIpRouteStaticTable.
IP hmAgentSwitchIpRouteStaticDestination	1.3.6.1.4.1.248.15.2.2.8.1.1	IpAddress	not-accessible	.....
IP hmAgentSwitchIpRouteStaticDestinationMask	1.3.6.1.4.1.248.15.2.2.8.1.2	IpAddress	not-accessible	.....
IP hmAgentSwitchIpRouteStaticNextHop	1.3.6.1.4.1.248.15.2.2.8.1.3	IpAddress	not-accessible	.....
I32 hmAgentSwitchIpRouteStaticPreference	1.3.6.1.4.1.248.15.2.2.8.1.4	Integer32	read-write	.....
ROW hmAgentSwitchIpRouteStaticStatus	1.3.6.1.4.1.248.15.2.2.8.1.5	RowStatus	read-write	.....
I32 hmAgentSwitchIpRouteStaticTrackId	1.3.6.1.4.1.248.15.2.2.8.1.6	Integer32	read-write	The trackId of the object that should be tracked by this nexthop. If the object goes down, the nexthop is removed from the routing table, it is added again if the object goes up. A value of zero means no tracking
INT hmAgentSwitchIpVlanSingleMacMode	1.3.6.1.4.1.248.15.2.2.100	INTEGER	read-write	If enabled, all vlan routing interfaces use the same MAC address.
hmAgentSwitchIpTableSizesGroup	1.3.6.1.4.1.248.15.2.2.101
I32 hmAgentSwitchIpTableSizeArp	1.3.6.1.4.1.248.15.2.2.101.1	Integer32	read-write	Sets the maximum size of the ARP table for routing
I32 hmAgentSwitchIpTableSizeUCRoutes	1.3.6.1.4.1.248.15.2.2.101.2	Integer32	read-write	Sets the size of the unicast route table
I32 hmAgentSwitchIpTableSizeMCRoutes	1.3.6.1.4.1.248.15.2.2.101.3	Integer32	read-write	Sets the size of the multicast route table
I32 hmAgentSwitchIpCurrentTableSizeArp	1.3.6.1.4.1.248.15.2.2.101.4	Integer32	read-only	The current size of the ARP table for routing
I32 hmAgentSwitchIpCurrentTableSizeUCRoutes	1.3.6.1.4.1.248.15.2.2.101.5	Integer32	read-only	The current size of the unicast route table
I32 hmAgentSwitchIpCurrentTableSizeMCRoutes	1.3.6.1.4.1.248.15.2.2.101.6	Integer32	read-only	The current size of the multicast route table
hmAgentRouterRipConfigGroup	1.3.6.1.4.1.248.15.2.3
INT hmAgentRouterRipAdminState	1.3.6.1.4.1.248.15.2.3.1	INTEGER	read-write	Sets the administrative mode of RIP in the router.
INT hmAgentRouterRipSplitHorizonMode	1.3.6.1.4.1.248.15.2.3.2	INTEGER	read-write	Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison reverse technique is used. The default split horizon mode is simple(2).
INT hmAgentRouterRipAutoSummaryMode	1.3.6.1.4.1.248.15.2.3.3	INTEGER	read-write	Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates generated by this router. The default auto summary mode is enable(1).
INT hmAgentRouterRipHostRoutesAcceptMode	1.3.6.1.4.1.248.15.2.3.4	INTEGER	read-write	Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighboring routers are ignored. The default host routes accept mode is enable(1).
I32 hmAgentRouterRipDefaultMetric	1.3.6.1.4.1.248.15.2.3.5	Integer32	read-write	Default metric of redistributed routes, when RIP redistributes from other protocols.
T/F hmAgentRouterRipDefaultMetricConfigured	1.3.6.1.4.1.248.15.2.3.6	TruthValue	read-write	Flag to determine whether RIP default-metric is configured or not.
T/F hmAgentRouterRipDefaultInfoOriginate	1.3.6.1.4.1.248.15.2.3.7	TruthValue	read-write	Flag to determine, whether RIP can advertise a default-route learned from another protocol.
hmAgentRipRouteRedistTable	1.3.6.1.4.1.248.15.2.3.8		not-accessible	This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
hmAgentRipRouteRedistEntry	1.3.6.1.4.1.248.15.2.3.8.1		not-accessible	The entry of the hmAgentRipRouteRedistTable.
INT hmAgentRipRouteRedistSource	1.3.6.1.4.1.248.15.2.3.8.1.1	INTEGER	read-only	Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.
INT hmAgentRipRouteRedistMode	1.3.6.1.4.1.248.15.2.3.8.1.2	INTEGER	read-write	User enabels/disables route-redistribution for a particular source protocol.
I32 hmAgentRipRouteRedistMetric	1.3.6.1.4.1.248.15.2.3.8.1.3	Integer32	read-write	Metric used for redistributing a particular source protocol route into RIP.
T/F hmAgentRipRouteRedistMetricConfigured	1.3.6.1.4.1.248.15.2.3.8.1.4	TruthValue	read-write	Flag to determine whether RIP redistribute-metric is configured or not.
INT hmAgentRipRouteRedistMatchInternal	1.3.6.1.4.1.248.15.2.3.8.1.5	INTEGER	read-write	If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
INT hmAgentRipRouteRedistMatchExternal1	1.3.6.1.4.1.248.15.2.3.8.1.6	INTEGER	read-write	If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
INT hmAgentRipRouteRedistMatchExternal2	1.3.6.1.4.1.248.15.2.3.8.1.7	INTEGER	read-write	If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
INT hmAgentRipRouteRedistMatchNSSAExternal1	1.3.6.1.4.1.248.15.2.3.8.1.8	INTEGER	read-write	If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
INT hmAgentRipRouteRedistMatchNSSAExternal2	1.3.6.1.4.1.248.15.2.3.8.1.9	INTEGER	read-write	If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
U32 hmAgentRipRouteRedistDistList	1.3.6.1.4.1.248.15.2.3.8.1.10	Unsigned32	read-write	Access-list number of the access-list, which filters routes received from a source-protocol.
T/F hmAgentRipRouteRedistDistListConfigured	1.3.6.1.4.1.248.15.2.3.8.1.11	TruthValue	read-write	Flag to determine whether Access-list is configured or not.
hmAgentRip2IfConfTable	1.3.6.1.4.1.248.15.2.3.9		not-accessible	A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB.
hmAgentRip2IfConfEntry	1.3.6.1.4.1.248.15.2.3.9.1		not-accessible	A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB.
I32 hmAgentRip2IfConfAuthKeyId	1.3.6.1.4.1.248.15.2.3.9.1.1	Integer32	read-create	The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used.
hmAgentRip2InterfaceTable	1.3.6.1.4.1.248.15.2.3.10		not-accessible	The hmAgentRip2InterfaceTable.
hmAgentRip2InterfaceEntry	1.3.6.1.4.1.248.15.2.3.10.1		not-accessible	The entry of the hmAgentRip2InterfaceTable.
I32 hmAgentRip2InterfaceIfIndex	1.3.6.1.4.1.248.15.2.3.10.1.1	Integer32	read-only	The IfIndex associated with this instance.
INT hmAgentRip2InterfaceAuthType	1.3.6.1.4.1.248.15.2.3.10.1.2	INTEGER	read-write	The type of Authentication used on this interface.
OCT hmAgentRip2InterfaceAuthKey	1.3.6.1.4.1.248.15.2.3.10.1.3	OCTET STRING	read-write	The value to be used as the Authentication Key whenever the corresponding instance of hmAgentRip2InterfaceAuthType has a value other than noAuthentication. A modification of the corresponding instance of hmAgentRip2InterfaceAuthType does not modify the hmAgentRip2InterfaceAuthKey value. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the right, with nulls (0x00). Reading this object always results in an OCTET STRING of length zero; authentication may not be bypassed by reading the MIB object.
I32 hmAgentRip2InterfaceAuthKeyId	1.3.6.1.4.1.248.15.2.3.10.1.4	Integer32	read-write	The identifier for the authentication key used on this interface. This field is only meaningful when the hmAgentRip2InterfaceAuthType is md5(3); otherwise, the value is not used.
INT hmAgentRip2InterfaceSendVersion	1.3.6.1.4.1.248.15.2.3.10.1.5	INTEGER	read-write	What the router sends on this interface. ripVersion1 implies sending RIP updates compliant with RFC 1058. rip1Compatible implies broadcasting RIP-2 updates using RFC 1058 route subsumption rules. ripVersion2 implies multicasting RIP-2 updates.
INT hmAgentRip2InterfaceReceiveVersion	1.3.6.1.4.1.248.15.2.3.10.1.6	INTEGER	read-write	This indicates which version of RIP updates are to be accepted. Note that rip2 and rip1OrRip2 implies reception of multicast packets.
INT hmAgentRip2InterfaceAdminState	1.3.6.1.4.1.248.15.2.3.10.1.7	INTEGER	read-write	Enables/disables RIP on the interface
C32 hmAgentRip2RcvBadPacketsEx	1.3.6.1.4.1.248.15.2.3.10.1.8	Counter32	read-only	......
C32 hmAgentRip2RcvBadRoutes	1.3.6.1.4.1.248.15.2.3.10.1.9	Counter32	read-only	....
C32 hmAgentRip2SentUpdates	1.3.6.1.4.1.248.15.2.3.10.1.10	Counter32	read-only	....
I32 hmAgentRouterRipUpdateTimerInterval	1.3.6.1.4.1.248.15.2.3.50	Integer32	read-write	Sets the RIP update timer interval in the router. This is the time in seconds between two full routing table update packets.
hmAgentRouterOspfConfigGroup	1.3.6.1.4.1.248.15.2.4
I32 hmAgentOspfDefaultMetric	1.3.6.1.4.1.248.15.2.4.1	Integer32	read-write	Default metric of redistributed routes, when OSPF redistributes from other protocols.
T/F hmAgentOspfDefaultMetricConfigured	1.3.6.1.4.1.248.15.2.4.2	TruthValue	read-write	Flag to determine whether OSPF default-metric is configured or not.
T/F hmAgentOspfDefaultInfoOriginate	1.3.6.1.4.1.248.15.2.4.3	TruthValue	read-write	Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
T/F hmAgentOspfDefaultInfoOriginateAlways	1.3.6.1.4.1.248.15.2.4.4	TruthValue	read-write	When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
I32 hmAgentOspfDefaultInfoOriginateMetric	1.3.6.1.4.1.248.15.2.4.5	Integer32	read-write	Metric of the default route,which OSPF advertises when learned from other protocol.
T/F hmAgentOspfDefaultInfoOriginateMetricConfigured	1.3.6.1.4.1.248.15.2.4.6	TruthValue	read-write	Flag to determine whether OSPF default-info originate metric is configured or not.
INT hmAgentOspfDefaultInfoOriginateMetricType	1.3.6.1.4.1.248.15.2.4.7	INTEGER	read-write	Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
hmAgentOspfRouteRedistTable	1.3.6.1.4.1.248.15.2.4.8		not-accessible	This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
hmAgentOspfRouteRedistEntry	1.3.6.1.4.1.248.15.2.4.8.1		not-accessible	The entry of the hmAgentOspfRouteRedistTable.
INT hmAgentOspfRouteRedistSource	1.3.6.1.4.1.248.15.2.4.8.1.1	INTEGER	read-only	Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.
INT hmAgentOspfRouteRedistMode	1.3.6.1.4.1.248.15.2.4.8.1.2	INTEGER	read-write	User enabels/disables route-redistribution for a particular source protocol.
I32 hmAgentOspfRouteRedistMetric	1.3.6.1.4.1.248.15.2.4.8.1.3	Integer32	read-write	Metric used for redistributing a particular source protocol route into OSPF.
T/F hmAgentOspfRouteRedistMetricConfigured	1.3.6.1.4.1.248.15.2.4.8.1.4	TruthValue	read-write	Flag to determine whether OSPF redistribute-metric is configured or not.
INT hmAgentOspfRouteRedistMetricType	1.3.6.1.4.1.248.15.2.4.8.1.5	INTEGER	read-write	Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
U32 hmAgentOspfRouteRedistTag	1.3.6.1.4.1.248.15.2.4.8.1.6	Unsigned32	read-write	It specifies the tag field in routes redistributed by OSPF.
T/F hmAgentOspfRouteRedistSubnets	1.3.6.1.4.1.248.15.2.4.8.1.7	TruthValue	read-write	If this value is false, then OSPF will not redistribute subnetted routes.
U32 hmAgentOspfRouteRedistDistList	1.3.6.1.4.1.248.15.2.4.8.1.8	Unsigned32	read-write	Access-list number of the access-list, which filters routes received from a source-protocol.
T/F hmAgentOspfRouteRedistDistListConfigured	1.3.6.1.4.1.248.15.2.4.8.1.9	TruthValue	read-write	Flag to determine whether Access-list is configured or not.
hmAgentOspfIfTable	1.3.6.1.4.1.248.15.2.4.9		not-accessible	The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
hmAgentOspfIfEntry	1.3.6.1.4.1.248.15.2.4.9.1		not-accessible	The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
I32 hmAgentOspfIfAuthKeyId	1.3.6.1.4.1.248.15.2.4.9.1.1	Integer32	read-create	The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used.
INT hmAgentOspfIfIpMtuIgnoreFlag	1.3.6.1.4.1.248.15.2.4.9.1.2	INTEGER	read-write	Configures the IP MTU Ignore Flag value for this OSPF interface.
hmAgentOspfVirtIfTable	1.3.6.1.4.1.248.15.2.4.10		not-accessible	Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
hmAgentOspfVirtIfEntry	1.3.6.1.4.1.248.15.2.4.10.1		not-accessible	Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB.
I32 hmAgentOspfVirtIfAuthKeyId	1.3.6.1.4.1.248.15.2.4.10.1.1	Integer32	read-create	The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used.
INT hmAgentRouterOspfRFC1583CompatibilityMode	1.3.6.1.4.1.248.15.2.4.11	INTEGER	read-write	From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled', the preference rules are those stated in Section 16.4.1, which prevent routing loops when AS- external-LSAs for the same destination have been originated from different areas. Set to 'enabled' by default. In order to minimize the chance of routing loops, all OSPF routers in an OSPF routing domain should have RFC1583Compatibility set identically. When there are routers present that have not been updated with the functionality specified in Section 16.4.1 of this memo, all routers should have RFC1583Compatibility set to 'enabled'. Otherwise, all routers should have RFC1583Compatibility set to 'disabled', preventing all routing loops.
hmAgentSnmpTrapFlagsConfigGroupLayer3	1.3.6.1.4.1.248.15.2.5
INT hmAgentSnmpVRRPNewMasterTrapFlag	1.3.6.1.4.1.248.15.2.5.1	INTEGER	read-write	This flag enables the sending of VRRP new master notification traps.
INT hmAgentSnmpVRRPAuthFailureTrapFlag	1.3.6.1.4.1.248.15.2.5.2	INTEGER	read-write	This flag enables the sending of VRRP authentication failure notification traps.
hmAgentECMPGroup	1.3.6.1.4.1.248.15.2.7
I32 hmAgentECMPOspfMaxPaths	1.3.6.1.4.1.248.15.2.7.1	Integer32	read-write	It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent.
hmAgentRouterVrrpConfigGroup	1.3.6.1.4.1.248.15.2.8
INT hmAgentRouterVrrpAdminState	1.3.6.1.4.1.248.15.2.8.1	INTEGER	read-write	Sets the administrative mode of VRRP in the router.
hmVrrpExtGroup	1.3.6.1.4.1.248.15.2.9
hmVrrpTrackingTable	1.3.6.1.4.1.248.15.2.9.1		not-accessible	This table contains variables to define an entry in the VRRP Tracking database.
hmVrrpTrackingEntry	1.3.6.1.4.1.248.15.2.9.1.1		not-accessible	The entry of the hmVrrpTrackingTable.
I32 hmVrrpTrackIfIndex	1.3.6.1.4.1.248.15.2.9.1.1.1	Integer32	not-accessible	DURABLE: { 1:all } The interface number of the virtual router
I32 hmVrrpTrackVrid	1.3.6.1.4.1.248.15.2.9.1.1.2	Integer32	not-accessible	DURABLE: { 1:all } The virtual router id for this virtual router
I32 hmVrrpTrackId	1.3.6.1.4.1.248.15.2.9.1.1.3	Integer32	not-accessible	DURABLE: { 1:all } The id of the object being tracked
I32 hmVrrpTrackDecrement	1.3.6.1.4.1.248.15.2.9.1.1.4	Integer32	read-write	DURABLE: { 1:all } The value by wich the current priority of the virtual router is decremented when the tracked object goes DOWN.
INT hmVrrpTrackOperStatus	1.3.6.1.4.1.248.15.2.9.1.1.5	INTEGER	read-only	Shows if the tracked object is currently UP od DOWN
ROW hmVrrpTrackRowStatus	1.3.6.1.4.1.248.15.2.9.1.1.6	RowStatus	read-create	DURABLE: { 1:all } Defines the status of a vrrp tracking database entry. Set to createAndGo(4) to create a new row. Set to destroy(6) to delete an entry. Reads as active(1) if the tracked object exists and is trackable, notReady(3) otherwise.
hmVrrpExtTable	1.3.6.1.4.1.248.15.2.9.2		not-accessible	This table contains variables to define an entry in the VRRP enhancements database.
hmVrrpExtEntry	1.3.6.1.4.1.248.15.2.9.2.1		not-accessible	The entry of the hmVrrpExtTable.
I32 hmVrrpExtIfIndex	1.3.6.1.4.1.248.15.2.9.2.1.1	Integer32	not-accessible	DURABLE: { 1:all } The interface number of the virtual router
I32 hmVrrpExtVrid	1.3.6.1.4.1.248.15.2.9.2.1.2	Integer32	not-accessible	DURABLE: { 1:all } The virtual router id for this virtual router
I32 hmVrrpExtDomainId	1.3.6.1.4.1.248.15.2.9.2.1.3	Integer32	read-write	DURABLE: { 1:all } The domain this virtual router is a member of. If set to 0, the virtual router is not a member of any domain.
INT hmVrrpExtDomainRole	1.3.6.1.4.1.248.15.2.9.2.1.4	INTEGER	read-write	DURABLE: { 1:all } The role of this virtual router in its domain. This is none(1) if the virtual router is not member of a domain, supervisor(3) if it is the supervisor of its domain, member(2) otherwise.
INT hmVrrpExtDomainStatus	1.3.6.1.4.1.248.15.2.9.2.1.5	INTEGER	read-only	Shows if the domain configuration is correct for this virtual router
IP hmVrrpExtAdvertAddress	1.3.6.1.4.1.248.15.2.9.2.1.6	IpAddress	read-write	DURABLE: { 1:all } The IP address advertisements of the virtual router are sent to
I32 hmVrrpExtAdvertTimer	1.3.6.1.4.1.248.15.2.9.2.1.7	Integer32	read-write	DURABLE: { 1:all } This is used to set the interval between advertisements in milliseconds. This accesses the same value as vrrpOperAdvertisementInterval.
I32 hmVrrpExtOperPriority	1.3.6.1.4.1.248.15.2.9.2.1.8	Integer32	read-only	DURABLE: { 1:all } The current operating priority of the virtual router. This can be different from the configured priority if tracked objects are down. For domain members this is the priority of the supervisor of that Domain.
IP hmVrrpExtNotifyAddress	1.3.6.1.4.1.248.15.2.9.2.1.9	IpAddress	read-write	DURABLE: { 1:all } The IP address notifications of the virtual router are sent to
INT hmVrrpExtNotifyLinkdown	1.3.6.1.4.1.248.15.2.9.2.1.10	INTEGER	read-write	DURABLE: { 1:all } Enables or disables sending of notification messages if the virtual router's interface goes down.
I32 hmVrrpExtPreemptionDelay	1.3.6.1.4.1.248.15.2.9.2.1.11	Integer32	read-write	DURABLE: { 1:all } Time (in seconds) after startup of the virtual router by which the preemption of a Master with a lower priority is delayed.
hmVrrpDomainTable	1.3.6.1.4.1.248.15.2.9.3		not-accessible	This table contains variables to define an entry in the VRRP domain database.
hmVrrpDomainEntry	1.3.6.1.4.1.248.15.2.9.3.1		not-accessible
I32 hmVrrpDomainId	1.3.6.1.4.1.248.15.2.9.3.1.1	Integer32	not-accessible	The domain ID.
INT hmVrrpDomainMemberSendAdv	1.3.6.1.4.1.248.15.2.9.3.1.2	INTEGER	read-write	DURABLE: { 1:all } Determines if the members of this domain send advertisement packets. If set to disabled(2), only the supervisor of the domain sends packets.
INT hmVrrpDomainStatus	1.3.6.1.4.1.248.15.2.9.3.1.3	INTEGER	read-only	Shows if the configuration of the domain is complete.
I32 hmVrrpDomainSupervisorIfIndex	1.3.6.1.4.1.248.15.2.9.3.1.4	Integer32	read-only	The interface number of the supervisor of the domain
I32 hmVrrpDomainSupervisorVrid	1.3.6.1.4.1.248.15.2.9.3.1.5	Integer32	read-only	The virtual router id of the supervisor of the domain
I32 hmVrrpDomainOperPriority	1.3.6.1.4.1.248.15.2.9.3.1.6	Integer32	read-only	The current operating priority of the domain. This can be different from the configured priority if tracked objects are down. For domain members this is the priority of the supervisor of that Domain if the supervisor is configured and up.
INT hmVrrpDomainSupervisorOperState	1.3.6.1.4.1.248.15.2.9.3.1.7	INTEGER	read-only	Shows the current operational state of the domain supervisor.

RFC description

Hirschmann Automation and Control MIB for MMP4 (Modular Managed Platform 4) industrial networking devices that defines routing protocol management objects. Used for monitoring and managing dynamic routing operations (OSPF, RIP) on Hirschmann industrial switches and networking equipment.

Start monitoring Hirschmann Platform4 industrial switch/router with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HIRSCHMANN-MMP4-ROUTING-MIB