| OID symbolic | OID numeric | Type | Access | Description |
|---|
| hpnicfPBR | 1.3.6.1.4.1.11.2.14.11.15.2.113 | | | This MIB contains objects to manage the configuration and information
of PBR. It routes IP packets by user defined policy
other than normal destination address based routing. |
| hpnicfPBRObjects | 1.3.6.1.4.1.11.2.14.11.15.2.113.1 | | | |
| hpnicfPBRGlobal | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1 | | | |
| T/F hpnicfPBRNexthopTrapEnabled | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.1 | TruthValue | read-write | The value is a global setting only for IPv4 PBR. If the
value is set to 'false', the feature is disabled. |
| STR hpnicfPBRLocalPolicy | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.2 | DisplayString | read-write | The value is a global setting. An existing policy name setting enables
local PBR for IPv4 packets initiated by the device.
Only one policy can be applied locally.
An empty name setting disables the feature. |
| T/F hpnicfPBRIPv6NexthopTrapEnabled | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.1.3 | TruthValue | read-write | The value is a global setting only for IPv6 PBR. If the
value is set to 'false', the feature is disabled. |
| hpnicfPBRMibTrap | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2 | | | |
| hpnicfPBRTrapObjects | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1 | | | |
| IPt hpnicfPBRNexthopAddrType | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.1 | InetAddressType | accessible-for-notify | Indicating address type of hpnicfPBRNexthopAddr, which can be IPv4
or IPv6. |
| IP hpnicfPBRNexthopAddr | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.1.2 | InetAddress | accessible-for-notify | The involved next hop IP address of trap information. |
| hpnicfPBRTraps | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2 | | | |
| hpnicfPBRTrapsPrefix | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0 | | | |
| NTF hpnicfPBRNexthopFailedTrap | 1.3.6.1.4.1.11.2.14.11.15.2.113.1.2.2.0.1 | | | When the next hop of PBR apply clause became
unreachable according to routing information, trap is generated
and is sent to the remote monitoring device. |
| hpnicfPBRTables | 1.3.6.1.4.1.11.2.14.11.15.2.113.2 | | | |
| hpnicfPBRMibPolicyNodeTable | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1 | | not-accessible | A table for PBR nodes. |
| hpnicfPBRMibPolicyNodeEntry | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1 | | not-accessible | An entry for PBR nodes. |
| IPt hpnicfPBRMibPolicyNodeAddrType | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.1 | InetAddressType | not-accessible | Address type of policy node, which can be IPv4 or IPv6. |
| STR hpnicfPBRMibPolicyName | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.2 | DisplayString | not-accessible | Policy name of PBR node. |
| I32 hpnicfPBRMibPolicyNodeId | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.3 | Integer32 | not-accessible | Sequence identifier of PBR node. |
| T/F hpnicfPBRMibPolicyNodeMode | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.4 | TruthValue | read-create | Mode of PBR node. If the mode of a node is marked as true,
the packets that meet the matching rules are processed by
action rules in the node. If the mode of a node is marked as
false, the packets that meet the matching rules are
sent back to the normal forwarding path. |
| ROW hpnicfPBRMibPolicyNodeRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.1.1.5 | RowStatus | read-create | Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy. |
| hpnicfPBRMibIfPolicyTable | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2 | | not-accessible | A table for interfaces being applied with PBR
nodes with the same policy name. |
| hpnicfPBRMibIfPolicyEntry | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1 | | not-accessible | An entry for reference relation between interface and policy
nodes. |
| IPt hpnicfPBRMibPolicyAddressType | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.1 | InetAddressType | not-accessible | Address type of policy node, which can be
IPv4 or IPv6. |
| STR hpnicfPBRMibAppliedPolicyName | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.2 | DisplayString | read-create | Policy name of PBR nodes. |
| ROW hpnicfPBRMibIfPolicyRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.2.1.3 | RowStatus | read-create | Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy. |
| hpnicfPBRMibMatchAclTable | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.3 | | not-accessible | A table for ACLs being used by a policy node. Only one ACL
can be used within a node at most. |
| hpnicfPBRMibMatchAclEntry | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1 | | not-accessible | An entry for policy node that uses an ACL group as its
if-match rule. |
| I32 hpnicfPBRMibAclGroupId | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.3.1.1 | Integer32 | read-write | Index of number-acl group.
Setting -1 indicates closing this rule. |
| hpnicfPBRMibApplyPrecedenceTable | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4 | | not-accessible | A table for precedence values being used by a policy node.
Only one precedence value can be used within a node at most. |
| hpnicfPBRMibApplyPrecedenceEntry | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1 | | not-accessible | An entry for policy node with an action
to set IP precedence for matching packets. |
| I32 hpnicfPBRMibApplyPrecedenceValue | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.4.1.1 | Integer32 | read-write | Value of precedence being applied on IP header.
Value of precedence
routine Specify routine precedence(0)
priority Specify priority precedence(1)
immediate Specify immediate precedence(2)
flash Specify flash precedence(3)
flash-override Specify flash-override precedence(4)
critical Specify critical precedence(5)
internet Specify internetwork control precedence(6)
network Specify network control precedence(7)
Setting -1 indicates closing this action. |
| hpnicfPBRMibApplyNexthopTable | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5 | | not-accessible | A table for next hop actions being used by a policy node. |
| hpnicfPBRMibApplyNexthopEntry | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1 | | not-accessible | An entry for policy node with an action
to set next hop for matching packets. |
| I32 hpnicfPBRMibApplyNexthopIndex | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.1 | Integer32 | not-accessible | Index of next hop for the apply next hop action. |
| STR hpnicfPBRMibApplyNexthopVpnName | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.2 | DisplayString | read-create | Name of VPN instance where apply next hop action is used. |
| IPt hpnicfPBRMibApplyNexthopAddressType | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.3 | InetAddressType | read-create | Address type of hpnicfPBRMibApplyNexthopAddress,
which can be IPv4 or IPv6. |
| IP hpnicfPBRMibApplyNexthopAddress | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.4 | InetAddress | read-create | Next hop IP address of apply next hop action. |
| I32 hpnicfPBRMibApplyNexthopTrackId | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.5 | Integer32 | read-create | Identifier of track object related with next hop.
Setting 0 indicates closing this function. |
| T/F hpnicfPBRMibApplyNexthopDirect | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.6 | TruthValue | read-create | Direct route attribute of next hop
according to route information. |
| ROW hpnicfPBRMibApplyNexthopRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.5.1.7 | RowStatus | read-create | Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy. |
| hpnicfPBRMibApplyDefaultNexthopTable | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6 | | not-accessible | A table for default next hop actions being used by a policy
node. |
| hpnicfPBRMibApplyDefaultNexthopEntry | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1 | | not-accessible | An entry for policy node with an action
to set default next hop for matching packets. |
| I32 hpnicfPBRMibApplyDefaultNexthopIndex | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.1 | Integer32 | not-accessible | Index of default next hop for the apply
default next hop action. |
| STR hpnicfPBRMibApplyDefaultNexthopVpnName | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.2 | DisplayString | read-create | Name of VPN instance where apply default next hop action
is used. |
| IPt hpnicfPBRMibApplyDefaultNexthopAddressType | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.3 | InetAddressType | read-create | Address type of hpnicfPBRMibApplyDefaultNexthopAddress,
which can be IPv4 or IPv6. |
| IP hpnicfPBRMibApplyDefaultNexthopAddress | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.4 | InetAddress | read-create | Next hop IP address of apply default next hop action. |
| I32 hpnicfPBRMibApplyDefaultNexthopTrackId | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.5 | Integer32 | read-create | Identifier of track object related with default next hop.
Setting 0 indicates closing this function. |
| T/F hpnicfPBRMibApplyDefaultNexthopDirect | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.6 | TruthValue | read-create | Direct route attribute of apply default next hop
address according to route information. |
| ROW hpnicfPBRMibApplyDefaultNexthopRowStatus | 1.3.6.1.4.1.11.2.14.11.15.2.113.2.6.1.7 | RowStatus | read-create | Operation status of this table entry.
Three actions are used: active,
createAndGo, and destroy. |
