F3-L3-MIB

All MIBs › F3-L3-MIB

Organization: ADVA Optical Networking SE

Last Updated: 2018-10-25

Category: IP and Core Protocols, Routing Protocols, Technology: Routing, Technology: Routing/L3, Vendor: ADVA Optical

Description: ADVA Optical Networking F3 platform MIB for Layer 3 routing configuration including IP interfaces and static routes on FSP 150.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is F3-L3-MIB?

F3-L3-MIB is an ADVA Optical Networking SE proprietary MIB (built on ADVA-MIB and companion CM-COMMON/CM-ENTITY/CM-FACILITY/CM-IP MIBs) defining Layer 3 management objects for the F3 (FSP150CM/CC) product lines. Its DHCP-relay-agent table, keyed by index, records alias, admin/secondary/operational state, IP version, server IP address, Option-82 sub-option-9 control/value, storage type, and row status, while a VRF table records alias, admin/secondary/operational state, access-isolation-control enable, and ping/traceroute IPv4 destination with an action and result. As a configuration/status MIB it lets an administrator confirm DHCP-relay and VRF configuration, and run ping/traceroute diagnostics within a VRF, on an ADVA FSP150 platform. It is deployed on ADVA Optical Networking FSP150CM/CC (F3) platforms. Engineers can download the F3-L3-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in F3-L3-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

ADVA Optical Networking FSP150CM/CC (F3) platforms

Monitoring Examples

An administrator sets f3VrfPingIpv4Destination and reads f3VrfPingResult to test reachability within a specific VRF on an ADVA FSP150 platform.

What Can Be Monitored

DHCP-relay and VRF configuration, with ping/traceroute diagnostics

Imported Objects

From ADVA-MIB

fsp150cm

OBJECT-IDENTITY

From CM-COMMON-MIB

AdminState
CmPmBinAction
CmPmIntervalType
F3DisplayString
FlowSecState
IpVersion
OperationalState
PerfCounter64
SecondaryState
TrafficDirection
VlanId
VlanPriority

From CM-ENTITY-MIB

neIndex	OBJECT-TYPE
shelfIndex	OBJECT-TYPE
slotIndex	OBJECT-TYPE

From CM-FACILITY-MIB

AclNoMatchDispositionType
PolicerAlgorithmType
PolicerColorMode
ShapingType

From CM-IP-MIB

CmDhcpRole
DHCPCIDType
DHCPHostNameType
IpEntryType
IpMode

From ENTITY-MIB

PhysicalIndex

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From IPV6-TC

Ipv6Address

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DateAndTime
DisplayString
MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue
VariablePointer

OIDs

OID symbolic	OID numeric	Type	Access	Description
f3L3MIB	1.3.6.1.4.1.2544.1.12.37			This module defines the L3 MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
f3L3Objects	1.3.6.1.4.1.2544.1.12.37.1
f3DhcpRelayAgentTable	1.3.6.1.4.1.2544.1.12.37.1.1		not-accessible	A list of entries for the Dhcp Relay Agent.
f3DhcpRelayAgentEntry	1.3.6.1.4.1.2544.1.12.37.1.1.1		not-accessible	A conceptual row in the f3DhcpRelayAgentTable.
I32 f3DhcpRelayAgentIndex	1.3.6.1.4.1.2544.1.12.37.1.1.1.1	Integer32	not-accessible	The index of the DHCP relay agent entry.
STR f3DhcpRelayAgentAlias	1.3.6.1.4.1.2544.1.12.37.1.1.1.2	F3DisplayString	read-write	The DHCP relay agent alias.
ADM f3DhcpRelayAgentAdminState	1.3.6.1.4.1.2544.1.12.37.1.1.1.3	AdminState	read-write	The admin state of this DCHP relay agent.
SEC f3DhcpRelayAgentSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.1.1.4	SecondaryState	read-only	The secondary state of this DCHP relay agent.
OPE f3DhcpRelayAgentOperationalState	1.3.6.1.4.1.2544.1.12.37.1.1.1.5	OperationalState	read-only	The operational state of this DCHP relay agent.
IPV f3DhcpRelayAgentIpVersion	1.3.6.1.4.1.2544.1.12.37.1.1.1.6	IpVersion	read-write	The Ip version of this DCHP relay agent.
IP f3DhcpRelayAgentServerIpAddress	1.3.6.1.4.1.2544.1.12.37.1.1.1.7	IpAddress	read-write	The Ipv4 address of this DCHP relay agent.
T/F f3DhcpRelayAgentOp82SubOp9ControlEnabled	1.3.6.1.4.1.2544.1.12.37.1.1.1.8	TruthValue	read-write	This object describes the suboption9 of the option82 whether enabled.
STR f3DhcpRelayAgentOp82SubOp9Value	1.3.6.1.4.1.2544.1.12.37.1.1.1.9	DisplayString	read-write	This object describes the vendor string if the suboption9 enabled.
STO f3DhcpRelayAgentStorageType	1.3.6.1.4.1.2544.1.12.37.1.1.1.10	StorageType	read-create	The type of storage configured for this entry.
ROW f3DhcpRelayAgentRowStatus	1.3.6.1.4.1.2544.1.12.37.1.1.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpRelayAgentRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpRelayAgentRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3DhcpRelayAgentRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3VrfTable	1.3.6.1.4.1.2544.1.12.37.1.2		not-accessible	A list of entries for the VRF user.
f3VrfEntry	1.3.6.1.4.1.2544.1.12.37.1.2.1		not-accessible	A conceptual row in the f3VrfTable.
I32 f3VrfIndex	1.3.6.1.4.1.2544.1.12.37.1.2.1.1	Integer32	not-accessible	The vrf number.
STR f3VrfAlias	1.3.6.1.4.1.2544.1.12.37.1.2.1.2	F3DisplayString	read-write	This object describes the vrf alias.
ADM f3VrfAdminState	1.3.6.1.4.1.2544.1.12.37.1.2.1.3	AdminState	read-write	This object describes the vrf admin state.
SEC f3VrfSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.2.1.4	SecondaryState	read-only	This object describes the vrf secondary state.
OPE f3VrfOperationalState	1.3.6.1.4.1.2544.1.12.37.1.2.1.5	OperationalState	read-only	This object describes the vrf operational state.
OPE f3VrfAccIsolationControlEnabled	1.3.6.1.4.1.2544.1.12.37.1.2.1.6	OperationalState	read-write	This object is used to control traffic between L3 flowpoint on Acc port.
IP f3VrfPingIpv4Destination	1.3.6.1.4.1.2544.1.12.37.1.2.1.7	IpAddress	read-write	This object allows user to specify the IP Address to which ICMP Ping will be initiated.
IP f3VrfTraceRouteIpv4Destination	1.3.6.1.4.1.2544.1.12.37.1.2.1.8	IpAddress	read-write	This object allows user to specify the IP Address to which Trace Route will be initiated.
VRF f3VrfAction	1.3.6.1.4.1.2544.1.12.37.1.2.1.9	VrfAction	read-write	The Vrf action, includes fluch ARP cache, ping, trace route. DEPRECATED and new variable to use is f3VrfActionX.
STR f3VrfPingResult	1.3.6.1.4.1.2544.1.12.37.1.2.1.10	F3DisplayString	read-only	The Ping action result.
STR f3VrfTraceRouteResult	1.3.6.1.4.1.2544.1.12.37.1.2.1.11	F3DisplayString	read-only	The trace route action result.
STO f3VrfStorageType	1.3.6.1.4.1.2544.1.12.37.1.2.1.12	StorageType	read-create	The type of storage configured for this entry.
ROW f3VrfRowStatus	1.3.6.1.4.1.2544.1.12.37.1.2.1.13	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3VrfRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3VrfDhcpRoutesControl	1.3.6.1.4.1.2544.1.12.37.1.2.1.14	TruthValue	read-write	This object is used to control dynamic routes creation based on DHCP relay agent operation. if it is disabled, the vrf should not use host ip addresses assigned by means of DHCP relay agent for the dynamic routes creation.
VRF f3VrfActionX	1.3.6.1.4.1.2544.1.12.37.1.2.1.15	VrfActionType	read-write	The Vrf action, includes ping, trace route and route retrieve
STR f3VrfActionIfName	1.3.6.1.4.1.2544.1.12.37.1.2.1.16	DisplayString	read-write	Interface Name parameter for the VRF action. For example, to flush ARP cache for a particular interface this variable shall be set and then f3VrfActionX shall be set to flushArpCache.
IPV f3VrfIpVersion	1.3.6.1.4.1.2544.1.12.37.1.2.1.17	IpVersion	read-create	This object describes the vrf Ip version.
ADR f3VrfPingIpv6Destination	1.3.6.1.4.1.2544.1.12.37.1.2.1.18	Ipv6Address	read-write	This object allows user to specify the IP Address to which ICMP Ping will be initiated.
ADR f3VrfTraceRouteIpv6Destination	1.3.6.1.4.1.2544.1.12.37.1.2.1.19	Ipv6Address	read-write	This object allows user to specify the IP Address to which Trace Route will be initiated.
I32 f3VrfMaxFwdTableEntries	1.3.6.1.4.1.2544.1.12.37.1.2.1.20	Integer32	read-write	This object defines the maximum forwarding table entries that can be used by the vrf
T/F f3VrfFwdTableFull	1.3.6.1.4.1.2544.1.12.37.1.2.1.21	TruthValue	read-only	This is a status variable that indicates if the forwarding table for the vrf is full
ECM f3VrfEcmpDistribution	1.3.6.1.4.1.2544.1.12.37.1.2.1.22	EcmpDistributionType	read-write	The fields in IP Packets used in hash lookup.
U32 f3VrfEcmpStaticRoutesMaximumPaths	1.3.6.1.4.1.2544.1.12.37.1.2.1.23	Unsigned32	read-write	The maximum number of path used in ECMP for static routes.
VRF f3VrfTransportType	1.3.6.1.4.1.2544.1.12.37.1.2.1.24	VrfTransportType	read-create	The transport type of this entry.
f3L3FlowPointTable	1.3.6.1.4.1.2544.1.12.37.1.3		not-accessible	A list of entries for the L3 flowpoint.
f3L3FlowPointEntry	1.3.6.1.4.1.2544.1.12.37.1.3.1		not-accessible	A conceptual row in the f3L3FlowPointTable.
I32 f3L3FlowPointPortTypeIndex	1.3.6.1.4.1.2544.1.12.37.1.3.1.1	Integer32	not-accessible	It specifies the port type, value 1 means Network Port, value 2 means Access Port, value 3 means Mobile Traffic Port.
I32 f3L3FlowPointPortIndex	1.3.6.1.4.1.2544.1.12.37.1.3.1.2	Integer32	not-accessible	The port number value.
I32 f3L3FlowPointIndex	1.3.6.1.4.1.2544.1.12.37.1.3.1.3	Integer32	not-accessible	The L3 flow point number.
STR f3L3FlowPointAlias	1.3.6.1.4.1.2544.1.12.37.1.3.1.4	F3DisplayString	read-write	This object describes the L3 flow point alias.
ADM f3L3FlowPointAdminState	1.3.6.1.4.1.2544.1.12.37.1.3.1.5	AdminState	read-write	This object describes the L3 flow point admin state.
SEC f3L3FlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.3.1.6	SecondaryState	read-only	This object describes the L3 flow point secondary state.
OPE f3L3FlowPointOperationalState	1.3.6.1.4.1.2544.1.12.37.1.3.1.7	OperationalState	read-only	This object describes the L3 flow point operational state.
T/F f3L3FlowPointMultiCOSEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.8	TruthValue	read-write	Control to enable or disable per-COS BWPs on a FlowPoint. ENABLED:per-COS BWPs (CIR, EIR, CBS, EBS, CM, CF) are applied as a policing function for all ingress frames of this flowpoint. DISABLED:per-Flow BWP (CIR, EIR, CBS, EBS, CM, CF) is applied as a policing function for all ingress frames of this flowpoint. User must independently enable each COS BWP when ENABLED.
I32 f3L3FlowPointCOS	1.3.6.1.4.1.2544.1.12.37.1.3.1.9	Integer32	read-write	Identifies the internal COS applied to all ingress frames of the flowpoint.
T/F f3L3FlowPointUntaggedMemberShipEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.10	TruthValue	read-write	This attribute controls untagged frames membership for the Flowpoint. ENABLED: Ingress untagged frame matches Flowpoint membership. DISABLED: Ingress untagged frame does not match Flowpoint membership.
T/F f3L3FlowPointOuterTagMemberShipEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.11	TruthValue	read-write	This attribute controls outer tag membership for the Flowpoint whether enabled.
VLA f3L3FlowPointOuterTagMemberShipVlanId	1.3.6.1.4.1.2544.1.12.37.1.3.1.12	VlanId	read-write	This attribute controls outer tag VlanId membership for the Flowpoint.
T/F f3L3FlowPointInnerTagMemberShipEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.13	TruthValue	read-write	This attribute controls inner tag membership for the Flowpoint whether enabled.
VLA f3L3FlowPointInnerTagMemberShipVlanId	1.3.6.1.4.1.2544.1.12.37.1.3.1.14	VlanId	read-write	This attribute controls inner tag VlanId membership for the Flowpoint.
T/F f3L3FlowPointFragmentedPktsFwdEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.15	TruthValue	read-write	This attribute specifies whether received IP Packets with More Fragments flag should be forwarded by the FlowPoint.
T/F f3L3FlowPointHCosMgmtEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.16	TruthValue	read-write	This attribute specifies whether the Hierarchical COS shaping enabled for this flow point.
U32 f3L3FlowPointHCosGuaranteedBwHi	1.3.6.1.4.1.2544.1.12.37.1.3.1.17	Unsigned32	read-write	This attribute specifies the Hierarchical COS guarranteed bandwidth high 32 bits for this flow point.
U32 f3L3FlowPointHCosGuaranteedBwLo	1.3.6.1.4.1.2544.1.12.37.1.3.1.18	Unsigned32	read-write	This attribute specifies the Hierarchical COS guarranteed bandwidth low 32 bits for this flow point.
U32 f3L3FlowPointHCosMaximumBwHi	1.3.6.1.4.1.2544.1.12.37.1.3.1.19	Unsigned32	read-write	This attribute specifies the Hierarchical COS maximum bandwidth high 32 bits for this flow point.
U32 f3L3FlowPointHCosMaximumBwLo	1.3.6.1.4.1.2544.1.12.37.1.3.1.20	Unsigned32	read-write	This attribute specifies the Hierarchical COS maximum bandwidth low 32 bits for this flow point.
T/F f3L3FlowPointPolicingEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.21	TruthValue	read-write	This attribute allows enable or disable policers of the flow point.
STO f3L3FlowPointStorageType	1.3.6.1.4.1.2544.1.12.37.1.3.1.22	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3FlowPointRowStatus	1.3.6.1.4.1.2544.1.12.37.1.3.1.23	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3FlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3FlowPointRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The f3L3FlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3L3FlowPointDscpOverwriteControl	1.3.6.1.4.1.2544.1.12.37.1.3.1.24	TruthValue	read-write	This attribute allows enable dscp value overwrite.
NUM f3L3FlowPointPriMapProfile	1.3.6.1.4.1.2544.1.12.37.1.3.1.25	VariablePointer	read-write	This attribute allows specify the priority map profile.
NUM f3L3FlowPointRefConnectGuardFlow	1.3.6.1.4.1.2544.1.12.37.1.3.1.26	VariablePointer	read-create	This object specifies Mac Sec flow object OID.
FLO f3L3FlowPointSecureState	1.3.6.1.4.1.2544.1.12.37.1.3.1.27	FlowSecState	read-only	This object specifies the secure state of this flow.
T/F f3L3FlowPointSecureBlockingEnabled	1.3.6.1.4.1.2544.1.12.37.1.3.1.28	TruthValue	read-create	This object can be used to enable/disable secure block.
I32 f3L3FlowPointWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.37.1.3.1.29	Integer32	read-write	This object used to specify wfq segmentation COS value.
I32 f3L3FlowPointWfqGroupCOS	1.3.6.1.4.1.2544.1.12.37.1.3.1.30	Integer32	read-write	This object used to specify wfq group COS value.
U32 f3L3FlowPointWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.37.1.3.1.31	Unsigned32	read-write	This object used to specify wfq group EIR low 32 bits value.
U32 f3L3FlowPointWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.37.1.3.1.32	Unsigned32	read-write	This object used to specify wfq group EIR high 32 bits value.
I32 f3L3FlowPointOuterVlanEthertype	1.3.6.1.4.1.2544.1.12.37.1.3.1.33	Integer32	read-write	.
I32 f3L3FlowPointInnerVlanEthertype	1.3.6.1.4.1.2544.1.12.37.1.3.1.34	Integer32	read-write	.
IPV f3L3FlowPointIpVersion	1.3.6.1.4.1.2544.1.12.37.1.3.1.35	IpVersion	read-create	.
f3L3AclRuleTable	1.3.6.1.4.1.2544.1.12.37.1.4		not-accessible	A list of entries for the L3 ACL rule.
f3L3AclRuleEntry	1.3.6.1.4.1.2544.1.12.37.1.4.1		not-accessible	A conceptual row in the f3L3AclRuleTable.
I32 f3L3AclRuleParentIndex	1.3.6.1.4.1.2544.1.12.37.1.4.1.1	Integer32	not-accessible	The ACL rule parent number, it could be flow index or L3 flow point index.
I32 f3L3AclRuleIndex	1.3.6.1.4.1.2544.1.12.37.1.4.1.2	Integer32	not-accessible	The ACL rule number.
STR f3L3AclRuleAlias	1.3.6.1.4.1.2544.1.12.37.1.4.1.3	F3DisplayString	read-write	The ACL rule alias.
T/F f3L3AclRuleSrcIpv4AddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.4	TruthValue	read-write	The ACL rule source IPv4 Adress control whether enabled.
T/F f3L3AclRuleDynamicSrcIpControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.5	TruthValue	read-write	The ACL rule dynamic source IPv4 or IPv6 Adress control whether enabled.
IP f3L3AclRuleSrcIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.6	IpAddress	read-write	The ACL rule source IPv4 Adress low limit.
T/F f3L3AclRuleDstIpv4AddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.7	TruthValue	read-write	The ACL rule Destination IPv4 Adress control whether enabled.
IP f3L3AclRuleDstIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.8	IpAddress	read-write	The ACL rule Destination IPv4 Adress low limit.
T/F f3L3AclRuleIpv4PriorityControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.9	TruthValue	read-write	The ACL rule IPv4 Priority control whether enabled.
I32 f3L3AclRuleIpv4PriorityLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.10	Integer32	read-write	The ACL rule IPv4 priority low limit.
T/F f3L3AclRuleProtocolControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.11	TruthValue	read-write	The ACL rule protocol control whether enabled.
I32 f3L3AclRuleProtocolNumber	1.3.6.1.4.1.2544.1.12.37.1.4.1.12	Integer32	read-write	The ACL rule protocol number.
T/F f3L3AclRuleSrcPortControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.13	TruthValue	read-write	The ACL rule source port whether enabled.
I32 f3L3AclRuleSrcPortLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.14	Integer32	read-write	The ACL rule source port low limit.
I32 f3L3AclRuleSrcPortHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.15	Integer32	read-write	The ACL rule source port low limit.
T/F f3L3AclRuleDstPortControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.16	TruthValue	read-write	The ACL rule destination port whether enabled.
I32 f3L3AclRuleDstPortLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.17	Integer32	read-write	The ACL rule destination port low limit.
I32 f3L3AclRuleDstPortHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.18	Integer32	read-write	The ACL rule destination port low limit.
I32 f3L3AclRulePriority	1.3.6.1.4.1.2544.1.12.37.1.4.1.19	Integer32	read-write	The ACL rule priority.
I32 f3L3AclRuleCOS	1.3.6.1.4.1.2544.1.12.37.1.4.1.20	Integer32	read-write	The ACL rule class of service.
L3A f3L3AclRuleOperation	1.3.6.1.4.1.2544.1.12.37.1.4.1.21	L3AclRuleOperation	read-write	The ACL rule action.
STR f3L3AclRuleSummary	1.3.6.1.4.1.2544.1.12.37.1.4.1.22	F3DisplayString	read-only	The ACL rule summary.
T/F f3L3AclRuleCosOverrideControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.23	TruthValue	read-write	The ACL rule COS Override control.
T/F f3L3AclRuleSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.24	TruthValue	read-write	The ACL rule Source MAC address control.
T/F f3L3AclRuleDynamicSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.25	TruthValue	read-write	The ACL rule dynamic Source MAC address control.
MAC f3L3AclRuleSrcMacAddress	1.3.6.1.4.1.2544.1.12.37.1.4.1.26	MacAddress	read-write	The ACL rule dynamic Source MAC address.
MAC f3L3AclRuleSrcMacAddressMask	1.3.6.1.4.1.2544.1.12.37.1.4.1.27	MacAddress	read-write	The ACL rule dynamic Source MAC address mask.
T/F f3L3AclRuleDstMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.28	TruthValue	read-write	The ACL rule dynamic Destination MAC address control.
MAC f3L3AclRuleDstMacAddress	1.3.6.1.4.1.2544.1.12.37.1.4.1.29	MacAddress	read-write	The ACL rule dynamic Destination MAC address.
MAC f3L3AclRuleDstMacAddressMask	1.3.6.1.4.1.2544.1.12.37.1.4.1.30	MacAddress	read-write	The ACL rule dynamic Destination MAC address mask.
T/F f3L3AclRuleOuterVlanVIDControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.31	TruthValue	read-write	The ACL rule outer VID control.
VLA f3L3AclRuleOuterVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.32	VlanId	read-write	The ACL rule outer Vlan ID low limit.
VLA f3L3AclRuleOuterVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.33	VlanId	read-write	The ACL rule outer Vlan ID high limit.
T/F f3L3AclRuleInnerVlanVIDControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.34	TruthValue	read-write	The ACL rule inner VID control.
VLA f3L3AclRuleInnerVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.35	VlanId	read-write	The ACL rule inner Vlan ID low limit.
VLA f3L3AclRuleInnerVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.36	VlanId	read-write	The ACL rule Inner Vlan ID high limit.
T/F f3L3AclRuleOuterVlanPcpControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.37	TruthValue	read-write	The ACL rule outer vlan PCP control.
VLA f3L3AclRuleOuterVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.38	VlanPriority	read-write	The ACL rule outer vlan PCP priority low limit.
VLA f3L3AclRuleOuterVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.39	VlanPriority	read-write	The ACL rule outer vlan PCP priority high limit.
T/F f3L3AclRuleInnerVlanPcpControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.40	TruthValue	read-write	The ACL rule inner vlan PCP control.
VLA f3L3AclRuleInnerVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.41	VlanPriority	read-write	The ACL rule inner vlan PCP priority low limit.
VLA f3L3AclRuleInnerVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.42	VlanPriority	read-write	The ACL rule inner vlan PCP priority high limit.
T/F f3L3AclRuleOuterVlanDeiControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.43	TruthValue	read-write	The ACL rule outer vlan DEI control.
U32 f3L3AclRuleOuterVlanDei	1.3.6.1.4.1.2544.1.12.37.1.4.1.44	Unsigned32	read-write	The ACL rule outer vlan DEI.
T/F f3L3AclRuleEtherTypeControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.45	TruthValue	read-write	The ACL rule outer vlan ether type control.
I32 f3L3AclRuleEtherType	1.3.6.1.4.1.2544.1.12.37.1.4.1.46	Integer32	read-write	The ACL rule outer vlan ether type.
T/F f3L3AclRuleTcpFlagsControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.47	TruthValue	read-write	The ACL rule outer vlan TCP flags control.
I32 f3L3AclRuleTcpFlags	1.3.6.1.4.1.2544.1.12.37.1.4.1.48	Integer32	read-write	The ACL rule outer vlan TCP flags.
IP f3L3AclRuleSrcIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.49	IpAddress	read-write	The ACL rule source ipv4 adress high limit.
IP f3L3AclRuleDstIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.50	IpAddress	read-write	The ACL rule destination ipv4 adress high limit.
I32 f3L3AclRuleIpv4PriorityHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.51	Integer32	read-write	The ACL rule ipv4 priority high limit.
STO f3L3AclRuleStorageType	1.3.6.1.4.1.2544.1.12.37.1.4.1.52	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3AclRuleRowStatus	1.3.6.1.4.1.2544.1.12.37.1.4.1.53	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3AclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3AclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3AclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1).
ADM f3L3AclRuleAdminState	1.3.6.1.4.1.2544.1.12.37.1.4.1.54	AdminState	read-write	This object allows user configure the Acl Rule in in-service or management state.
T/F f3L3AclRuleActive	1.3.6.1.4.1.2544.1.12.37.1.4.1.55	TruthValue	read-write	The ACL Rule Active activates/deactivates ACL Rule.
T/F f3L3AclRuleSrcIpV6AddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.56	TruthValue	read-write	The ACL rule source ipv6 adress control.
ADR f3L3AclRuleSrcIpV6Address	1.3.6.1.4.1.2544.1.12.37.1.4.1.57	Ipv6Address	read-write	The ACL rule source ipv6 adress.
I32 f3L3AclRuleSrcIpV6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.4.1.58	Integer32	read-write	The ACL rule source ipv6 adress prefix length.
T/F f3L3AclRuleDstIpV6AddressControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.59	TruthValue	read-write	The ACL rule destination ipv6 adress control.
ADR f3L3AclRuleDstIpV6Address	1.3.6.1.4.1.2544.1.12.37.1.4.1.60	Ipv6Address	read-write	The ACL rule destination ipv6 adress.
I32 f3L3AclRuleDstIpV6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.4.1.61	Integer32	read-write	The ACL rule destination ipv6 adress prefix length.
T/F f3L3AclRuleIpV6FlowLabelControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.62	TruthValue	read-write	The ACL rule ipv6 Flow Label Control enables/disables Flow Label.
I32 f3L3AclRuleIpV6FlowLabel	1.3.6.1.4.1.2544.1.12.37.1.4.1.63	Integer32	read-write	The ACL rule ipv6 Flow Label.
T/F f3L3AclRulePriorityControl	1.3.6.1.4.1.2544.1.12.37.1.4.1.64	TruthValue	read-write	The ACL rule Priority control whether enabled.
I32 f3L3AclRulePriorityLowLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.65	Integer32	read-write	The ACL rule priority low limit.
I32 f3L3AclRulePriorityHighLimit	1.3.6.1.4.1.2544.1.12.37.1.4.1.66	Integer32	read-write	The ACL rule priority high limit.
f3L2A2NAclRuleTable	1.3.6.1.4.1.2544.1.12.37.1.5		not-accessible	A list of entries for the L2A2N ACL rule.
f3L2A2NAclRuleEntry	1.3.6.1.4.1.2544.1.12.37.1.5.1		not-accessible	A conceptual row in the f3L2A2NAclRuleTable.
I32 f3L2A2NAclRuleParentIndex	1.3.6.1.4.1.2544.1.12.37.1.5.1.1	Integer32	not-accessible	The ACL rule parent number, it could be flow index
I32 f3L2A2NAclRuleIndex	1.3.6.1.4.1.2544.1.12.37.1.5.1.2	Integer32	not-accessible	The ACL rule number.
STR f3L2A2NAclRuleAlias	1.3.6.1.4.1.2544.1.12.37.1.5.1.3	F3DisplayString	read-write	The ACL rule alias.
T/F f3L2A2NAclRuleSrcIpv4AddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.4	TruthValue	read-write	The ACL rule source IPv4 Adress control whether enabled.
T/F f3L2A2NAclRuleDynamicSrcIpControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.5	TruthValue	read-write	The ACL rule dynamic source IPv4 or IPv6 Adress control whether enabled.
IP f3L2A2NAclRuleSrcIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.6	IpAddress	read-write	The ACL rule source IPv4 Adress low limit.
T/F f3L2A2NAclRuleDstIpv4AddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.7	TruthValue	read-write	The ACL rule Destination IPv4 Adress control whether enabled.
IP f3L2A2NAclRuleDstIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.8	IpAddress	read-write	The ACL rule Destination IPv4 Adress low limit.
T/F f3L2A2NAclRuleIpv4PriorityControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.9	TruthValue	read-write	The ACL rule IPv4 Priority control whether enabled.
I32 f3L2A2NAclRuleIpv4PriorityLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.10	Integer32	read-write	The ACL rule IPv4 priority low limit.
T/F f3L2A2NAclRuleProtocolControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.11	TruthValue	read-write	The ACL rule protocol control whether enabled.
I32 f3L2A2NAclRuleProtocolNumber	1.3.6.1.4.1.2544.1.12.37.1.5.1.12	Integer32	read-write	The ACL rule protocol number.
T/F f3L2A2NAclRuleSrcPortControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.13	TruthValue	read-write	The ACL rule source port whether enabled.
I32 f3L2A2NAclRuleSrcPortLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.14	Integer32	read-write	The ACL rule source port low limit.
I32 f3L2A2NAclRuleSrcPortHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.15	Integer32	read-write	The ACL rule source port low limit.
T/F f3L2A2NAclRuleDstPortControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.16	TruthValue	read-write	The ACL rule destination port whether enabled.
I32 f3L2A2NAclRuleDstPortLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.17	Integer32	read-write	The ACL rule destination port low limit.
I32 f3L2A2NAclRuleDstPortHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.18	Integer32	read-write	The ACL rule destination port low limit.
I32 f3L2A2NAclRulePriority	1.3.6.1.4.1.2544.1.12.37.1.5.1.19	Integer32	read-write	The ACL rule priority.
I32 f3L2A2NAclRuleCOS	1.3.6.1.4.1.2544.1.12.37.1.5.1.20	Integer32	read-write	The ACL rule class of service.
L3A f3L2A2NAclRuleOperation	1.3.6.1.4.1.2544.1.12.37.1.5.1.21	L3AclRuleOperation	read-write	The ACL rule action.
STR f3L2A2NAclRuleSummary	1.3.6.1.4.1.2544.1.12.37.1.5.1.22	F3DisplayString	read-only	The ACL rule summary.
T/F f3L2A2NAclRuleCosOverrideControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.23	TruthValue	read-write	The ACL rule COS Override control.
T/F f3L2A2NAclRuleSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.24	TruthValue	read-write	The ACL rule Source MAC address control.
T/F f3L2A2NAclRuleDynamicSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.25	TruthValue	read-write	The ACL rule dynamic Source MAC address control.
MAC f3L2A2NAclRuleSrcMacAddress	1.3.6.1.4.1.2544.1.12.37.1.5.1.26	MacAddress	read-write	The ACL rule dynamic Source MAC address.
MAC f3L2A2NAclRuleSrcMacAddressMask	1.3.6.1.4.1.2544.1.12.37.1.5.1.27	MacAddress	read-write	The ACL rule dynamic Source MAC address mask.
T/F f3L2A2NAclRuleDstMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.28	TruthValue	read-write	The ACL rule dynamic Destination MAC address control.
MAC f3L2A2NAclRuleDstMacAddress	1.3.6.1.4.1.2544.1.12.37.1.5.1.29	MacAddress	read-write	The ACL rule dynamic Destination MAC address.
MAC f3L2A2NAclRuleDstMacAddressMask	1.3.6.1.4.1.2544.1.12.37.1.5.1.30	MacAddress	read-write	The ACL rule dynamic Destination MAC address mask.
T/F f3L2A2NAclRuleOuterVlanVIDControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.31	TruthValue	read-write	The ACL rule outer VID control.
VLA f3L2A2NAclRuleOuterVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.32	VlanId	read-write	The ACL rule outer Vlan ID low limit.
VLA f3L2A2NAclRuleOuterVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.33	VlanId	read-write	The ACL rule outer Vlan ID high limit.
T/F f3L2A2NAclRuleInnerVlanVIDControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.34	TruthValue	read-write	The ACL rule inner VID control.
VLA f3L2A2NAclRuleInnerVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.35	VlanId	read-write	The ACL rule inner Vlan ID low limit.
VLA f3L2A2NAclRuleInnerVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.36	VlanId	read-write	The ACL rule Inner Vlan ID high limit.
T/F f3L2A2NAclRuleOuterVlanPcpControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.37	TruthValue	read-write	The ACL rule outer vlan PCP control.
VLA f3L2A2NAclRuleOuterVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.38	VlanPriority	read-write	The ACL rule outer vlan PCP priority low limit.
VLA f3L2A2NAclRuleOuterVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.39	VlanPriority	read-write	The ACL rule outer vlan PCP priority high limit.
T/F f3L2A2NAclRuleInnerVlanPcpControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.40	TruthValue	read-write	The ACL rule inner vlan PCP control.
VLA f3L2A2NAclRuleInnerVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.41	VlanPriority	read-write	The ACL rule inner vlan PCP priority low limit.
VLA f3L2A2NAclRuleInnerVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.42	VlanPriority	read-write	The ACL rule inner vlan PCP priority high limit.
T/F f3L2A2NAclRuleOuterVlanDeiControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.43	TruthValue	read-write	The ACL rule outer vlan DEI control.
U32 f3L2A2NAclRuleOuterVlanDei	1.3.6.1.4.1.2544.1.12.37.1.5.1.44	Unsigned32	read-write	The ACL rule outer vlan DEI.
T/F f3L2A2NAclRuleEtherTypeControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.45	TruthValue	read-write	The ACL rule outer vlan ether type control.
I32 f3L2A2NAclRuleEtherType	1.3.6.1.4.1.2544.1.12.37.1.5.1.46	Integer32	read-write	The ACL rule outer vlan ether type.
T/F f3L2A2NAclRuleTcpFlagsControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.47	TruthValue	read-write	The ACL rule outer vlan TCP flags control.
I32 f3L2A2NAclRuleTcpFlags	1.3.6.1.4.1.2544.1.12.37.1.5.1.48	Integer32	read-write	The ACL rule outer vlan TCP flags.
IP f3L2A2NAclRuleSrcIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.49	IpAddress	read-write	The ACL rule source ipv4 adress high limit.
IP f3L2A2NAclRuleDstIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.50	IpAddress	read-write	The ACL rule destination ipv4 adress high limit.
I32 f3L2A2NAclRuleIpv4PriorityHighLimit	1.3.6.1.4.1.2544.1.12.37.1.5.1.51	Integer32	read-write	The ACL rule ipv4 priority high limit.
STO f3L2A2NAclRuleStorageType	1.3.6.1.4.1.2544.1.12.37.1.5.1.52	StorageType	read-create	The type of storage configured for this entry.
ROW f3L2A2NAclRuleRowStatus	1.3.6.1.4.1.2544.1.12.37.1.5.1.53	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L2A2NAclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L2A2NAclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L2A2NAclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1).
ADM f3L2A2NAclRuleAdminState	1.3.6.1.4.1.2544.1.12.37.1.5.1.54	AdminState	read-write	This object allows user configure the Acl Rule in-service or management state.
T/F f3L2A2NAclRuleActive	1.3.6.1.4.1.2544.1.12.37.1.5.1.55	TruthValue	read-write	The ACL rule active control.
T/F f3L2A2NAclRuleSrcIpV6AddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.56	TruthValue	read-write	The ACL rule source ipv6 adress control.
ADR f3L2A2NAclRuleSrcIpV6Address	1.3.6.1.4.1.2544.1.12.37.1.5.1.57	Ipv6Address	read-write	The ACL rule source ipv6 adress.
I32 f3L2A2NAclRuleSrcIpV6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.5.1.58	Integer32	read-write	The ACL rule source ipv6 adress prefix length.
T/F f3L2A2NAclRuleDstIpV6AddressControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.59	TruthValue	read-write	The ACL rule destination ipv6 adress control.
ADR f3L2A2NAclRuleDstIpV6Address	1.3.6.1.4.1.2544.1.12.37.1.5.1.60	Ipv6Address	read-write	The ACL rule destination ipv6 adress.
I32 f3L2A2NAclRuleDstIpV6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.5.1.61	Integer32	read-write	The ACL rule destination ipv6 adress prefix length.
T/F f3L2A2NAclRuleIpV6FlowLabelControl	1.3.6.1.4.1.2544.1.12.37.1.5.1.62	TruthValue	read-write	The ACL rule IPv6 flow lable control.
I32 f3L2A2NAclRuleIpV6FlowLabel	1.3.6.1.4.1.2544.1.12.37.1.5.1.63	Integer32	read-write	The ACL rule IPv6 flow lable.
f3L2N2AAclRuleTable	1.3.6.1.4.1.2544.1.12.37.1.6		not-accessible	A list of entries for the L2N2A ACL rule.
f3L2N2AAclRuleEntry	1.3.6.1.4.1.2544.1.12.37.1.6.1		not-accessible	A conceptual row in the f3L2N2AAclRuleTable.
I32 f3L2N2AAclRuleParentIndex	1.3.6.1.4.1.2544.1.12.37.1.6.1.1	Integer32	not-accessible	The ACL rule parent number, it could be flow index
I32 f3L2N2AAclRuleIndex	1.3.6.1.4.1.2544.1.12.37.1.6.1.2	Integer32	not-accessible	The ACL rule number.
STR f3L2N2AAclRuleAlias	1.3.6.1.4.1.2544.1.12.37.1.6.1.3	F3DisplayString	read-write	The ACL rule alias.
T/F f3L2N2AAclRuleSrcIpv4AddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.4	TruthValue	read-write	The ACL rule source IPv4 Adress control whether enabled.
T/F f3L2N2AAclRuleDynamicSrcIpControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.5	TruthValue	read-write	The ACL rule dynamic source IPv4 or IPv6 Adress control whether enabled.
IP f3L2N2AAclRuleSrcIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.6	IpAddress	read-write	The ACL rule source IPv4 Adress low limit.
T/F f3L2N2AAclRuleDstIpv4AddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.7	TruthValue	read-write	The ACL rule Destination IPv4 Adress control whether enabled.
IP f3L2N2AAclRuleDstIpv4AddressLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.8	IpAddress	read-write	The ACL rule Destination IPv4 Adress low limit.
T/F f3L2N2AAclRuleIpv4PriorityControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.9	TruthValue	read-write	The ACL rule IPv4 Priority control whether enabled.
I32 f3L2N2AAclRuleIpv4PriorityLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.10	Integer32	read-write	The ACL rule IPv4 priority low limit.
T/F f3L2N2AAclRuleProtocolControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.11	TruthValue	read-write	The ACL rule protocol control whether enabled.
I32 f3L2N2AAclRuleProtocolNumber	1.3.6.1.4.1.2544.1.12.37.1.6.1.12	Integer32	read-write	The ACL rule protocol number.
T/F f3L2N2AAclRuleSrcPortControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.13	TruthValue	read-write	The ACL rule source port whether enabled.
I32 f3L2N2AAclRuleSrcPortLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.14	Integer32	read-write	The ACL rule source port low limit.
I32 f3L2N2AAclRuleSrcPortHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.15	Integer32	read-write	The ACL rule source port low limit.
T/F f3L2N2AAclRuleDstPortControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.16	TruthValue	read-write	The ACL rule destination port whether enabled.
I32 f3L2N2AAclRuleDstPortLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.17	Integer32	read-write	The ACL rule destination port low limit.
I32 f3L2N2AAclRuleDstPortHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.18	Integer32	read-write	The ACL rule destination port low limit.
I32 f3L2N2AAclRulePriority	1.3.6.1.4.1.2544.1.12.37.1.6.1.19	Integer32	read-write	The ACL rule priority.
I32 f3L2N2AAclRuleCOS	1.3.6.1.4.1.2544.1.12.37.1.6.1.20	Integer32	read-write	The ACL rule class of service.
L3A f3L2N2AAclRuleOperation	1.3.6.1.4.1.2544.1.12.37.1.6.1.21	L3AclRuleOperation	read-write	The ACL rule action.
STR f3L2N2AAclRuleSummary	1.3.6.1.4.1.2544.1.12.37.1.6.1.22	F3DisplayString	read-only	The ACL rule summary.
T/F f3L2N2AAclRuleCosOverrideControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.23	TruthValue	read-write	The ACL rule COS Override control.
T/F f3L2N2AAclRuleSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.24	TruthValue	read-write	The ACL rule Source MAC address control.
T/F f3L2N2AAclRuleDynamicSrcMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.25	TruthValue	read-write	The ACL rule dynamic Source MAC address control.
MAC f3L2N2AAclRuleSrcMacAddress	1.3.6.1.4.1.2544.1.12.37.1.6.1.26	MacAddress	read-write	The ACL rule dynamic Source MAC address.
MAC f3L2N2AAclRuleSrcMacAddressMask	1.3.6.1.4.1.2544.1.12.37.1.6.1.27	MacAddress	read-write	The ACL rule dynamic Source MAC address mask.
T/F f3L2N2AAclRuleDstMacAddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.28	TruthValue	read-write	The ACL rule dynamic Destination MAC address control.
MAC f3L2N2AAclRuleDstMacAddress	1.3.6.1.4.1.2544.1.12.37.1.6.1.29	MacAddress	read-write	The ACL rule dynamic Destination MAC address.
MAC f3L2N2AAclRuleDstMacAddressMask	1.3.6.1.4.1.2544.1.12.37.1.6.1.30	MacAddress	read-write	The ACL rule dynamic Destination MAC address mask.
T/F f3L2N2AAclRuleOuterVlanVIDControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.31	TruthValue	read-write	The ACL rule outer VID control.
VLA f3L2N2AAclRuleOuterVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.32	VlanId	read-write	The ACL rule outer Vlan ID low limit.
VLA f3L2N2AAclRuleOuterVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.33	VlanId	read-write	The ACL rule outer Vlan ID high limit.
T/F f3L2N2AAclRuleInnerVlanVIDControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.34	TruthValue	read-write	The ACL rule inner VID control.
VLA f3L2N2AAclRuleInnerVlanVIDLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.35	VlanId	read-write	The ACL rule inner Vlan ID low limit.
VLA f3L2N2AAclRuleInnerVlanVIDHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.36	VlanId	read-write	The ACL rule Inner Vlan ID high limit.
T/F f3L2N2AAclRuleOuterVlanPcpControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.37	TruthValue	read-write	The ACL rule outer vlan PCP control.
VLA f3L2N2AAclRuleOuterVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.38	VlanPriority	read-write	The ACL rule outer vlan PCP priority low limit.
VLA f3L2N2AAclRuleOuterVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.39	VlanPriority	read-write	The ACL rule outer vlan PCP priority high limit.
T/F f3L2N2AAclRuleInnerVlanPcpControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.40	TruthValue	read-write	The ACL rule inner vlan PCP control.
VLA f3L2N2AAclRuleInnerVlanPcpLowLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.41	VlanPriority	read-write	The ACL rule inner vlan PCP priority low limit.
VLA f3L2N2AAclRuleInnerVlanPcpHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.42	VlanPriority	read-write	The ACL rule inner vlan PCP priority high limit.
T/F f3L2N2AAclRuleOuterVlanDeiControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.43	TruthValue	read-write	The ACL rule outer vlan DEI control.
U32 f3L2N2AAclRuleOuterVlanDei	1.3.6.1.4.1.2544.1.12.37.1.6.1.44	Unsigned32	read-write	The ACL rule outer vlan DEI.
T/F f3L2N2AAclRuleEtherTypeControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.45	TruthValue	read-write	The ACL rule outer vlan ether type control.
I32 f3L2N2AAclRuleEtherType	1.3.6.1.4.1.2544.1.12.37.1.6.1.46	Integer32	read-write	The ACL rule outer vlan ether type.
T/F f3L2N2AAclRuleTcpFlagsControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.47	TruthValue	read-write	The ACL rule outer vlan TCP flags control.
I32 f3L2N2AAclRuleTcpFlags	1.3.6.1.4.1.2544.1.12.37.1.6.1.48	Integer32	read-write	The ACL rule outer vlan TCP flags.
IP f3L2N2AAclRuleSrcIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.49	IpAddress	read-write	The ACL rule source ipv4 adress high limit.
IP f3L2N2AAclRuleDstIpv4AddressHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.50	IpAddress	read-write	The ACL rule destination ipv4 adress high limit.
I32 f3L2N2AAclRuleIpv4PriorityHighLimit	1.3.6.1.4.1.2544.1.12.37.1.6.1.51	Integer32	read-write	The ACL rule ipv4 priority high limit.
STO f3L2N2AAclRuleStorageType	1.3.6.1.4.1.2544.1.12.37.1.6.1.52	StorageType	read-create	The type of storage configured for this entry.
ROW f3L2N2AAclRuleRowStatus	1.3.6.1.4.1.2544.1.12.37.1.6.1.53	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L2N2AAclRuleRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L2N2AAclRuleRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L2N2AAclRuleRowStatus object may be modified if the associated instance of this object is equal to active(1).
ADM f3L2N2AAclRuleAdminState	1.3.6.1.4.1.2544.1.12.37.1.6.1.54	AdminState	read-write	This object allows user configure the Acl Rule in-service or management state.
T/F f3L2N2AAclRuleActive	1.3.6.1.4.1.2544.1.12.37.1.6.1.55	TruthValue	read-write	The ACL rule active control.
T/F f3L2N2AAclRuleSrcIpV6AddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.56	TruthValue	read-write	The ACL rule source ipv6 adress control.
ADR f3L2N2AAclRuleSrcIpV6Address	1.3.6.1.4.1.2544.1.12.37.1.6.1.57	Ipv6Address	read-write	The ACL rule source ipv6 adress.
I32 f3L2N2AAclRuleSrcIpV6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.6.1.58	Integer32	read-write	The ACL rule source ipv6 adress prefix length.
T/F f3L2N2AAclRuleDstIpV6AddressControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.59	TruthValue	read-write	The ACL rule destination ipv6 adress control.
ADR f3L2N2AAclRuleDstIpV6Address	1.3.6.1.4.1.2544.1.12.37.1.6.1.60	Ipv6Address	read-write	The ACL rule destination ipv6 adress.
I32 f3L2N2AAclRuleDstIpV6AddressPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.6.1.61	Integer32	read-write	The ACL rule destination ipv6 adress prefix length.
T/F f3L2N2AAclRuleIpV6FlowLabelControl	1.3.6.1.4.1.2544.1.12.37.1.6.1.62	TruthValue	read-write	The ACL rule IPv6 flow lable control.
I32 f3L2N2AAclRuleIpV6FlowLabel	1.3.6.1.4.1.2544.1.12.37.1.6.1.63	Integer32	read-write	The ACL rule IPv6 flow lable.
f3L3QosPolicerTable	1.3.6.1.4.1.2544.1.12.37.1.7		not-accessible	A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes.
f3L3QosPolicerEntry	1.3.6.1.4.1.2544.1.12.37.1.7.1		not-accessible	A conceptual row in the f3L3QosPolicerTable. These entries represent a Quality of Service Policer.
I32 f3L3QosPolicerIndex	1.3.6.1.4.1.2544.1.12.37.1.7.1.1	Integer32	read-create	The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port.
ADM f3L3QosPolicerAdminState	1.3.6.1.4.1.2544.1.12.37.1.7.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Flow Policer.
OPE f3L3QosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.37.1.7.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Flow Policer.
SEC f3L3QosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.7.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Flow Policer.
U32 f3L3QosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.37.1.7.1.5	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR.
U32 f3L3QosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.37.1.7.1.6	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR.
U32 f3L3QosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.37.1.7.1.7	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.
U32 f3L3QosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.37.1.7.1.8	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR.
I32 f3L3QosPolicerCBS	1.3.6.1.4.1.2544.1.12.37.1.7.1.9	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer.
I32 f3L3QosPolicerEBS	1.3.6.1.4.1.2544.1.12.37.1.7.1.10	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer.
POL f3L3QosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.37.1.7.1.11	PolicerAlgorithmType	read-only	This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL f3L3QosPolicerColorMode	1.3.6.1.4.1.2544.1.12.37.1.7.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F f3L3QosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.37.1.7.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
STO f3L3QosPolicerStorageType	1.3.6.1.4.1.2544.1.12.37.1.7.1.14	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3QosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.37.1.7.1.15	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3QosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3QosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3QosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
U32 f3L3QosPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.37.1.7.1.16	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 f3L3QosPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.37.1.7.1.17	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
U32 f3L3QosPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.37.1.7.1.18	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 f3L3QosPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.37.1.7.1.19	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
NUM f3L3QosPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.37.1.7.1.20	VariablePointer	read-write	This object allows specification of envelope object.
I32 f3L3QosPolicerRank	1.3.6.1.4.1.2544.1.12.37.1.7.1.21	Integer32	read-write	This object allows specification of rank value.
T/F f3L3QosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.37.1.7.1.22	TruthValue	read-write	This object describes whether the policing is enabled.
f3L3QosShaperTable	1.3.6.1.4.1.2544.1.12.37.1.8		not-accessible	A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction.
f3L3QosShaperEntry	1.3.6.1.4.1.2544.1.12.37.1.8.1		not-accessible	A conceptual row in the f3L3QosShaperTable. These entries represent a Quality of Service Shaper.
I32 f3L3QosShaperIndex	1.3.6.1.4.1.2544.1.12.37.1.8.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
ADM f3L3QosShaperAdminState	1.3.6.1.4.1.2544.1.12.37.1.8.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE f3L3QosShaperOperationalState	1.3.6.1.4.1.2544.1.12.37.1.8.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC f3L3QosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.8.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 f3L3QosShaperCIRLo	1.3.6.1.4.1.2544.1.12.37.1.8.1.5	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 f3L3QosShaperCIRHi	1.3.6.1.4.1.2544.1.12.37.1.8.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 f3L3QosShaperEIRLo	1.3.6.1.4.1.2544.1.12.37.1.8.1.7	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3L3QosShaperEIRHi	1.3.6.1.4.1.2544.1.12.37.1.8.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 f3L3QosShaperBufferSize	1.3.6.1.4.1.2544.1.12.37.1.8.1.9	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 f3L3QosShaperCOS	1.3.6.1.4.1.2544.1.12.37.1.8.1.10	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
U32 f3L3QosShaperWredGreenMinQueueThreshold	1.3.6.1.4.1.2544.1.12.37.1.8.1.11	Unsigned32	read-create	This object represents the Wred green packet min queue threshold value.
U32 f3L3QosShaperWredGreenMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.37.1.8.1.12	Unsigned32	read-create	This object represents the Wred green packet max queue threshold value.
U32 f3L3QosShaperWredGreenDropProbability	1.3.6.1.4.1.2544.1.12.37.1.8.1.13	Unsigned32	read-create	This object represents the Wred green packet drop probability.
U32 f3L3QosShaperWredYellowMinQueueThreshold	1.3.6.1.4.1.2544.1.12.37.1.8.1.14	Unsigned32	read-create	This object represents the Wred yellow packet min queue threshold value.
U32 f3L3QosShaperWredYellowMaxQueueThreshold	1.3.6.1.4.1.2544.1.12.37.1.8.1.15	Unsigned32	read-create	This object represents the Wred yellow packet max queue threshold value.
U32 f3L3QosShaperWredYellowDropProbability	1.3.6.1.4.1.2544.1.12.37.1.8.1.16	Unsigned32	read-create	This object represents the Wred yellow packet drop probability.
STO f3L3QosShaperStorageType	1.3.6.1.4.1.2544.1.12.37.1.8.1.17	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3QosShaperRowStatus	1.3.6.1.4.1.2544.1.12.37.1.8.1.18	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3QosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3QosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3QosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
I32 f3L3QosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.37.1.8.1.19	Integer32	read-write	This object represents wfq weight value.
f3L3TrafficIPInterfaceTable	1.3.6.1.4.1.2544.1.12.37.1.9		not-accessible	A list of entries for the L3 Traffic IP Interface.
f3L3TrafficIPInterfaceEntry	1.3.6.1.4.1.2544.1.12.37.1.9.1		not-accessible	A conceptual row in the f3L3TrafficIPInterfaceTable.
I32 f3L3TrafficIPIfIndex	1.3.6.1.4.1.2544.1.12.37.1.9.1.1	Integer32	not-accessible	It specifies the traffic IP interface number.
STR f3L3TrafficIPIfName	1.3.6.1.4.1.2544.1.12.37.1.9.1.2	DisplayString	read-write	It specifies the traffic IP interface name.
ADM f3L3TrafficIPIfAdminState	1.3.6.1.4.1.2544.1.12.37.1.9.1.3	AdminState	read-write	This object represents the Administrative State of the interface.
SEC f3L3TrafficIPIfSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.9.1.4	SecondaryState	read-only	This object represents the Secondary State of the interface.
OPE f3L3TrafficIPIfOperationalState	1.3.6.1.4.1.2544.1.12.37.1.9.1.5	OperationalState	read-only	This object represents the Operational State of the interface.
T/F f3L3TrafficIPIfProxyArpEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.6	TruthValue	read-write	This attribute controls poxy ARP on this interface.
ADR f3L3TrafficIPIfIpAddressSourceType	1.3.6.1.4.1.2544.1.12.37.1.9.1.7	IfIpAddressSourceType	read-write	This attribute represents the IP address source type.
T/F f3L3TrafficIPIfMgmtUseEnable	1.3.6.1.4.1.2544.1.12.37.1.9.1.8	TruthValue	read-write	This attribute is used for controlling use of interface for management. If enabled the NE can be managed through this interface.
IP f3L3TrafficIPIfIpAddress	1.3.6.1.4.1.2544.1.12.37.1.9.1.9	IpAddress	read-write	IP Address of the interface.
IP f3L3TrafficIPIfMask	1.3.6.1.4.1.2544.1.12.37.1.9.1.10	IpAddress	read-write	IP Address mask of the interface.
NUM f3L3TrafficIPIfDhcpRelayInterfaceSide	1.3.6.1.4.1.2544.1.12.37.1.9.1.11	DhcpRelayInterfaceSide	read-write	This object represents interface side.
STR f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60	1.3.6.1.4.1.2544.1.12.37.1.9.1.12	DisplayString	read-write	DHCP Option 60 value used for association of received DHCP message with Traffic IP Interface.
T/F f3L3TrafficIPIfDhcpRelayVendorClassiDOpt60Control	1.3.6.1.4.1.2544.1.12.37.1.9.1.13	TruthValue	read-write	This Attribute is used to control inspection of DHCP option 60 presence in the DHCP messages received on Client Side Traffic IP Interface.
STR f3L3TrafficIPIfDhcpRelayUserClassOpt77	1.3.6.1.4.1.2544.1.12.37.1.9.1.14	DisplayString	read-write	DHCP Option 77 value used for association of received DHCP message with Traffic IP Interface .
T/F f3L3TrafficIPIfDhcpRelayUserClassOpt77Control	1.3.6.1.4.1.2544.1.12.37.1.9.1.15	TruthValue	read-write	This Attribute is used to control inspection of DHCP option 77 presence in the DHCP messages received on Client Side Traffic IP Interface.
STR f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1	1.3.6.1.4.1.2544.1.12.37.1.9.1.16	DisplayString	read-write	DHCP Option 82 sub option 1 value.
T/F f3L3TrafficIPIfDhcpRelayInfoOpt82Sub1Enabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.17	TruthValue	read-write	This Attribute is used to control inspection of DHCP option 82 sub option 1 presence in the DHCP messages received on Client Side Traffic IP Interface.
STR f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2	1.3.6.1.4.1.2544.1.12.37.1.9.1.18	DisplayString	read-write	DHCP Option 82 sub option 2 value.
T/F f3L3TrafficIPIfDhcpRelayInfoOpt82Sub2Enabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.19	TruthValue	read-write	This Attribute is used to control inspection of DHCP option 82 sub option 2 presence in the DHCP messages received on Client Side Traffic IP Interface.
T/F f3L3TrafficIPIfDhcpEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.20	TruthValue	read-write	Whether or not DHCP is enabled on this interface.
CMD f3L3TrafficIPIfDhcpRole	1.3.6.1.4.1.2544.1.12.37.1.9.1.21	CmDhcpRole	read-only	Specify the DHCP role on this interface.
T/F f3L3TrafficIPIfDhcpClientIdEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.22	TruthValue	read-write	Whether or not DHCP client id enabled.
STR f3L3TrafficIPIfDhcpClientId	1.3.6.1.4.1.2544.1.12.37.1.9.1.23	DisplayString	read-write	Specify the DHCP Cliend ID value.
T/F f3L3TrafficIPIfDhcpClassIdEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.24	TruthValue	read-write	Whether or not DHCP class id enabled.
T/F f3L3TrafficIPIfDhcpHostNameEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.25	TruthValue	read-write	Whether or not DHCP host name enabled.
STR f3L3TrafficIPIfDhcpHostName	1.3.6.1.4.1.2544.1.12.37.1.9.1.26	DisplayString	read-write	DHCP host name value.
DHC f3L3TrafficIPIfDhcpClientIdType	1.3.6.1.4.1.2544.1.12.37.1.9.1.27	DHCPCIDType	read-write	This object describe whether the dhcp cid type.
DHC f3L3TrafficIPIfDhcpHostNameType	1.3.6.1.4.1.2544.1.12.37.1.9.1.28	DHCPHostNameType	read-write	This object describe whether the dhcp host name type.
STO f3L3TrafficIPIfStorageType	1.3.6.1.4.1.2544.1.12.37.1.9.1.29	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficIPIfRowStatus	1.3.6.1.4.1.2544.1.12.37.1.9.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPIfRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPIfRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPIfRowStatus object may be modified if the associated instance of this object is equal to active(1).
AFF f3L3TrafficIPIfAction	1.3.6.1.4.1.2544.1.12.37.1.9.1.31	AffectiveArpActionType	read-write	This objects describes action set on this traffic ip interface. DEPRECATED and new variable to use is f3L3TrafficIPIfActionX.
NUM f3L3TrafficIPIfActionX	1.3.6.1.4.1.2544.1.12.37.1.9.1.32	TrafficIpInterfaceActionType	read-write	This objects describes action set on this traffic ip interface.
T/F f3L3TrafficIPIfUnnumberedControl	1.3.6.1.4.1.2544.1.12.37.1.9.1.33	TruthValue	read-create	This object specify IP interface whether is numbered.
STR f3L3TrafficIPIfBorrowedIntf	1.3.6.1.4.1.2544.1.12.37.1.9.1.34	DisplayString	read-create	This object specify IP interface name whose IP address is borrowed from currect object.
IPM f3L3TrafficIPIfIpMode	1.3.6.1.4.1.2544.1.12.37.1.9.1.35	IpMode	read-write	This object means the ip mode for the interface.
NUM f3L3TrafficIPIfType	1.3.6.1.4.1.2544.1.12.37.1.9.1.36	IpInterfaceType	read-write	This object represents the type of the interface.
ADR f3L3TrafficIPIfIpv6LinkLocalAddr	1.3.6.1.4.1.2544.1.12.37.1.9.1.37	Ipv6Address	read-write	Link-local Address.
ADR f3L3TrafficIPIfIpv6LinkLocalAddrMode	1.3.6.1.4.1.2544.1.12.37.1.9.1.38	Ipv6LinkLocalAddressMode	read-write	The assignment mode of IPv6 Link-Local Address, only manual and automatic are applicable.
T/F f3L3TrafficIPIfIpv6StatelessAddrAutoconfigEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.39	TruthValue	read-write	This is the control to enable or disable stateless address auto configuration.
ADR f3L3TrafficIPIfDefaultGateway	1.3.6.1.4.1.2544.1.12.37.1.9.1.40	Ipv6Address	read-write	indicates active default GW of the interface.
I32 f3L3TrafficIPIfIcmpErrorMsgRateLimit	1.3.6.1.4.1.2544.1.12.37.1.9.1.41	Integer32	read-write	limit originated ICMP error messages rate in number of messages per second. The value 0xFFFF shall be used to indicate no error message limit.
CMD f3L3TrafficIPIfDhcpv6Role	1.3.6.1.4.1.2544.1.12.37.1.9.1.42	CmDhcpRole	read-write	Allows setting the DHCPv6 role on this interface.
T/F f3L3TrafficIPIfDhcpv6Enabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.43	TruthValue	read-write	Allows enabling/disabling of DHCPv6 on this interface.
T/F f3L3TrafficIPIfDhcpRapidCommitControlEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.44	TruthValue	read-write	This is the control to enable or disable DHCP rapid commit.
U32 f3L3TrafficIPIfMaxRAInterval	1.3.6.1.4.1.2544.1.12.37.1.9.1.45	Unsigned32	read-write	Maximum time in seconds between generated RA messages.
U32 f3L3TrafficIPIfMinRAInterval	1.3.6.1.4.1.2544.1.12.37.1.9.1.46	Unsigned32	read-write	Minimum time in seconds between generated RA messages, should be less than 0.75* max-ra-interval.
U32 f3L3TrafficIPIfRouterLifeTime	1.3.6.1.4.1.2544.1.12.37.1.9.1.47	Unsigned32	read-write	Time in seconds the router can be used as a default router, should be larger than max-ra-interval.
U32 f3L3TrafficIPIfReachableTime	1.3.6.1.4.1.2544.1.12.37.1.9.1.48	Unsigned32	read-write	time in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation, 0 means unspecified.
T/F f3L3TrafficIPIfRaDhcpMoreConfigEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.49	TruthValue	read-write	RA More configurations via DHCP.
T/F f3L3TrafficIPIfRaManagedAddressConfigEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.50	TruthValue	read-write	RA Managed Address Config Control.
T/F f3L3TrafficIPIfRaRDNSSOptionEnabled	1.3.6.1.4.1.2544.1.12.37.1.9.1.51	TruthValue	read-write	Control Recursive DNS server option presence in the RA messages.
U32 f3L3TrafficIPIfRaRDNSSLifeTime	1.3.6.1.4.1.2544.1.12.37.1.9.1.52	Unsigned32	read-write	Set the Lifetime field of the RDNSS option.
STR f3L3TrafficIPIfRaDNSSList	1.3.6.1.4.1.2544.1.12.37.1.9.1.53	DisplayString	read-write	list of IPv6 addresses of DNS servers.
NDP f3L3TrafficIPIfRaDefaultRouterPreference	1.3.6.1.4.1.2544.1.12.37.1.9.1.54	NdpRaDefaultRouterPreference	read-write	Specifies Default Router preference field in RA according to RFC4191.
T/F f3L3TrafficIPIfDupAddrDetectControl	1.3.6.1.4.1.2544.1.12.37.1.9.1.55	TruthValue	read-write	Allows enabling/disabling of DAD on this interface.
U32 f3L3TrafficIPIfDupAddrDetectTransmits	1.3.6.1.4.1.2544.1.12.37.1.9.1.56	Unsigned32	read-write	Specify number of consequent NS messages sent by this interface.
U32 f3L3TrafficIPIfDupAddrDetectRetransTimer	1.3.6.1.4.1.2544.1.12.37.1.9.1.57	Unsigned32	read-write	Interval in ms between consecutive NS messages and as well as the time a node waits after sending the last NS before ending the DAD.
I32 f3L3TrafficIPIfMTU	1.3.6.1.4.1.2544.1.12.37.1.9.1.58	Integer32	read-write	MTU of a L3 Traffic IP Interface in bytes.
f3DhcpRelayAgentTrafficIpIfMemberTable	1.3.6.1.4.1.2544.1.12.37.1.10		not-accessible	A list of entries for the Dhcp Relay Agent Traffic Ip Interface member.
f3DhcpRelayAgentTrafficIpIfMemberEntry	1.3.6.1.4.1.2544.1.12.37.1.10.1		not-accessible	A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable.
NUM f3DhcpRelayAgentTrafficIpIfMemberObject	1.3.6.1.4.1.2544.1.12.37.1.10.1.1	VariablePointer	not-accessible	This object describes the traffic ip interface.
STO f3DhcpRelayAgentTrafficIpIfMemberStorageType	1.3.6.1.4.1.2544.1.12.37.1.10.1.2	StorageType	read-create	The type of storage configured for this entry.
ROW f3DhcpRelayAgentTrafficIpIfMemberRowStatus	1.3.6.1.4.1.2544.1.12.37.1.10.1.3	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpRelayAgentTrafficIpIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpRelayAgentTrafficIpIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3DhcpRelayAgentTrafficIpIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3VrfTrafficIpIfMemberTable	1.3.6.1.4.1.2544.1.12.37.1.11		not-accessible	A list of entries for the Vrf Traffic Ip Interface member.
f3VrfTrafficIpIfMemberEntry	1.3.6.1.4.1.2544.1.12.37.1.11.1		not-accessible	A conceptual row in the f3DhcpRelayAgentTrafficIpIfMemberTable.
NUM f3VrfTrafficIpIfMemberObject	1.3.6.1.4.1.2544.1.12.37.1.11.1.1	VariablePointer	not-accessible	This object describes the traffic ip interface.
STO f3VrfTrafficIpIfMemberStorageType	1.3.6.1.4.1.2544.1.12.37.1.11.1.2	StorageType	read-create	The type of storage configured for this entry.
ROW f3VrfTrafficIpIfMemberRowStatus	1.3.6.1.4.1.2544.1.12.37.1.11.1.3	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfTrafficIpIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfTrafficIpIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3VrfTrafficIpIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIpv4RouteTable	1.3.6.1.4.1.2544.1.12.37.1.12		not-accessible	A list of entries for the L3 Traffic Ipv4 route. Must set f3VrfAction as retrieveEffectiveRoutes(4) before get data from this table.
f3L3TrafficIpv4RouteEntry	1.3.6.1.4.1.2544.1.12.37.1.12.1		not-accessible	A conceptual row in the f3L3TrafficIpv4RouteTable.
IP f3L3TrafficIpv4RouteDest	1.3.6.1.4.1.2544.1.12.37.1.12.1.1	IpAddress	read-write	It specifies the traffic Ipv4 route destination.
IP f3L3TrafficIpv4RouteMask	1.3.6.1.4.1.2544.1.12.37.1.12.1.2	IpAddress	read-write	It specifies the traffic Ipv4 route mask.
IP f3L3TrafficIpv4RouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.12.1.3	IpAddress	read-write	It specifies the traffic Ipv4 route next hop.
I32 f3L3TrafficIpv4RouteMetric	1.3.6.1.4.1.2544.1.12.37.1.12.1.4	Integer32	read-write	It specifies the traffic Ipv4 route metric.
STR f3L3TrafficIpv4RouteInterface	1.3.6.1.4.1.2544.1.12.37.1.12.1.5	DisplayString	read-write	It specifies the traffic Ipv4 route interface.
T/F f3L3TrafficIpv4RouteAdvertise	1.3.6.1.4.1.2544.1.12.37.1.12.1.6	TruthValue	read-write	It specifies the traffic Ipv4 route advertise.
TRA f3L3TrafficIpv4RouteStatus	1.3.6.1.4.1.2544.1.12.37.1.12.1.7	TrafficIpRouteStatus	read-only	It specifies the traffic Ipv4 route status. DEPRECATED and new attribute to use is f3L3TrafficIpv4RouteStatusX.
T/F f3L3TrafficIpv4RouteSourceForwardingEnable	1.3.6.1.4.1.2544.1.12.37.1.12.1.8	TruthValue	read-write	It specifies the traffic Ipv4 route source forwarding whether enabled.
ROU f3L3TrafficIpv4RouteFlags	1.3.6.1.4.1.2544.1.12.37.1.12.1.9	RouteFlags	read-only	It specifies the traffic Ipv4 route flags.
STO f3L3TrafficIpv4RouteStorageType	1.3.6.1.4.1.2544.1.12.37.1.12.1.10	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficIpv4RouteRowStatus	1.3.6.1.4.1.2544.1.12.37.1.12.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv4RouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv4RouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv4RouteRowStatus object may be modified if the associated instance of this object is equal to active(1).
IPE f3L3TrafficIpv4RouteType	1.3.6.1.4.1.2544.1.12.37.1.12.1.12	IpEntryType	read-only	It specifies the route is dynamic or static.
TRA f3L3TrafficIpv4RouteStatusX	1.3.6.1.4.1.2544.1.12.37.1.12.1.13	TrafficIpRouteStatusType	read-only	It specifies the traffic Ipv4 route status.
NUM f3L3TrafficIpv4RouteOrigin	1.3.6.1.4.1.2544.1.12.37.1.12.1.14	TrafficIpRouteOriginType	read-only	The origin of IP Route.
f3L3TrafficArpTable	1.3.6.1.4.1.2544.1.12.37.1.13		not-accessible	A list of Traffic ARP entries on the NIDs. Must set f3L3TrafficIPIfActionX as optimizeArpRetrieve (1) before getting data from this table.
f3L3TrafficArpEntry	1.3.6.1.4.1.2544.1.12.37.1.13.1		not-accessible	A conceptual row in the f3L3TrafficArpTable. Entries can be created/deleted in this table by management application action.
IP f3L3TrafficArpIPAddress	1.3.6.1.4.1.2544.1.12.37.1.13.1.1	IpAddress	not-accessible	This object allows configuration of the ARP Entry IP Address.
MAC f3L3TrafficArpMacAddress	1.3.6.1.4.1.2544.1.12.37.1.13.1.2	MacAddress	read-create	This object allows management of the ARP Entry MAC Address.
STR f3L3TrafficArpInterface	1.3.6.1.4.1.2544.1.12.37.1.13.1.3	DisplayString	read-only	This object allows management of the ARP Entry Interface.
IPE f3L3TrafficArpEntryType	1.3.6.1.4.1.2544.1.12.37.1.13.1.4	IpEntryType	read-write	The type of ARP Entry. Note that static entries can be created.
STO f3L3TrafficArpStorageType	1.3.6.1.4.1.2544.1.12.37.1.13.1.5	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficArpRowStatus	1.3.6.1.4.1.2544.1.12.37.1.13.1.6	RowStatus	read-write	The status of this row. The f3L3TrafficArpRowStatus object may be modified if the associated instance of this object is equal to active(1), notInService(2), or notReady(3).
f3L3TrafficBgpRouterTable	1.3.6.1.4.1.2544.1.12.37.1.14		not-accessible	Traffic BGP Router.
f3L3TrafficBgpRouterEntry	1.3.6.1.4.1.2544.1.12.37.1.14.1		not-accessible	A conceptual row in the f3L3TrafficBgpRouterTable. Entries can be created/deleted in this table by management application action.
U32 f3L3TrafficBgpRouterIndex	1.3.6.1.4.1.2544.1.12.37.1.14.1.1	Unsigned32	not-accessible	The ID of BGP router.
ADM f3L3TrafficBgpRouterAdminState	1.3.6.1.4.1.2544.1.12.37.1.14.1.2	AdminState	read-write	This object represents the Administrative State of the Traffic BGP Router.
SEC f3L3TrafficBgpRouterSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.14.1.3	SecondaryState	read-only	This object represents the Secondary State of the Traffic BGP Router.
OPE f3L3TrafficBgpRouterOperationalState	1.3.6.1.4.1.2544.1.12.37.1.14.1.4	OperationalState	read-only	This object represents the Operational State of the Traffic BGP Router.
IP f3L3TrafficBgpRouterId	1.3.6.1.4.1.2544.1.12.37.1.14.1.5	IpAddress	read-write	BGP Router Identifier.
U32 f3L3TrafficBgpRouterAsNumber	1.3.6.1.4.1.2544.1.12.37.1.14.1.6	Unsigned32	read-write	Local autonomous system number of the router. Uses the 32-bit as-number type from the model in RFC 6991.
T/F f3L3TrafficBgpRouterConnectedRoutesRedistControl	1.3.6.1.4.1.2544.1.12.37.1.14.1.7	TruthValue	read-write	This attribute is used to control connected route redistribution into BGP.
T/F f3L3TrafficBgpRouterOspfRoutesRedistControl	1.3.6.1.4.1.2544.1.12.37.1.14.1.8	TruthValue	read-write	This attribute specifies OSPF route redistribution options False - OSPF routes are not redistributed to the BGP True - OSPF routes are redistributed to BGP.
T/F f3L3TrafficBgpRouterStaticRoutesRedistControl	1.3.6.1.4.1.2544.1.12.37.1.14.1.9	TruthValue	read-write	This attribute is used to control static route redistribution into BGP.
T/F f3L3TrafficBgpRouterDhcpRoutesRedistControl	1.3.6.1.4.1.2544.1.12.37.1.14.1.10	TruthValue	read-write	This attribute is used to control DHCP route redistribution into BGP.
STO f3L3TrafficBgpRouterStorageType	1.3.6.1.4.1.2544.1.12.37.1.14.1.11	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficBgpRouterRowStatus	1.3.6.1.4.1.2544.1.12.37.1.14.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpRouterRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpRouterRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpRouterRowStatus object may be modified if the associated instance of this object is equal to active(1).
BGP f3L3TrafficBgpRouterAction	1.3.6.1.4.1.2544.1.12.37.1.14.1.13	BgpRouterActionType	read-write	This object describes action set on this BGP Router.
U32 f3L3TrafficBgpRouterIBgpAdminDistance	1.3.6.1.4.1.2544.1.12.37.1.14.1.14	Unsigned32	read-write	Administrative distance for routes learned from internal BGP (iBGP).
U32 f3L3TrafficBgpRouterEBgpAdminDistance	1.3.6.1.4.1.2544.1.12.37.1.14.1.15	Unsigned32	read-write	Administrative distance for routes learned from external BGP (eBGP).
U32 f3L3TrafficBgpRouterEcmpMaximumPaths	1.3.6.1.4.1.2544.1.12.37.1.14.1.16	Unsigned32	read-write	The maximum number of path used in ECMP for BGP routes.
U32 f3L3TrafficBgpRouterRestartTime	1.3.6.1.4.1.2544.1.12.37.1.14.1.17	Unsigned32	read-write	Estimated time (in seconds) for the local BGP speaker to restart a session.This value is advertise in the graceful restart BGP capability. This is a 12-bit value, referred to as Restart Time in RFC4724. Per RFC4724, the suggested default value is <= the hold-time value.
U32 f3L3TrafficBgpRouterStaleRoutesTime	1.3.6.1.4.1.2544.1.12.37.1.14.1.18	Unsigned32	read-write	An upper-bound on the time that stale routes will be retained by a router after a session is restarted. If an End-of-RIB (EOR) marker is received prior to this timer expiring stale-routes will be flushed upon its receipt - if no EOR is received, then when this timer expires stale paths will be purged. This timer is referred to as the Selection_Deferral_Timer in FC4724.
f3L3TrafficBgpRouteTable	1.3.6.1.4.1.2544.1.12.37.1.15		not-accessible	BGP routes. Must set f3L3TrafficBgpRouterAction as optimizeBgpRouteRetrieve(1) before get data from this table.
f3L3TrafficBgpRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.15.1		not-accessible	A conceptual row in the f3L3TrafficBgpRouteTable. Entries can be created/deleted in this table by management application action.
IP f3L3TrafficBgpRouteNetwork	1.3.6.1.4.1.2544.1.12.37.1.15.1.1	IpAddress	not-accessible	Network of destination. Key of the table.
U32 f3L3TrafficBgpRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.15.1.2	Unsigned32	not-accessible	Metric value of this route. Key of the table.
IP f3L3TrafficBgpRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.15.1.3	IpAddress	not-accessible	IP address of next hop. Key of the table.
STR f3L3TrafficBgpRoutePath	1.3.6.1.4.1.2544.1.12.37.1.15.1.4	DisplayString	read-only	The list of AS numbers to the destination.
f3L3TrafficBgpPeerTable	1.3.6.1.4.1.2544.1.12.37.1.16		not-accessible	Traffic BGP peer.
f3L3TrafficBgpPeerEntry	1.3.6.1.4.1.2544.1.12.37.1.16.1		not-accessible	A conceptual row in the f3L3TrafficBgpPeerTable. Entries can be created/deleted in this table by management application action.
U32 f3L3TrafficBgpPeerIndex	1.3.6.1.4.1.2544.1.12.37.1.16.1.1	Unsigned32	not-accessible	The ID of BGP peer instance.
ADM f3L3TrafficBgpPeerAdminState	1.3.6.1.4.1.2544.1.12.37.1.16.1.2	AdminState	read-write	This object represents the Administrative State of the Traffic BGP Peer.
SEC f3L3TrafficBgpPeerSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.16.1.3	SecondaryState	read-only	This object represents the Secondary State of the Traffic BGP Peer.
OPE f3L3TrafficBgpPeerOperationalState	1.3.6.1.4.1.2544.1.12.37.1.16.1.4	OperationalState	read-only	This object represents the Operational State of the Traffic BGP Peer.
IP f3L3TrafficBgpPeerIpv4Addr	1.3.6.1.4.1.2544.1.12.37.1.16.1.5	IpAddress	read-write	BGP Neighbor IP address.
U32 f3L3TrafficBgpPeerAsNumber	1.3.6.1.4.1.2544.1.12.37.1.16.1.6	Unsigned32	read-write	AS number of the peer.
STR f3L3TrafficBgpPeerDescription	1.3.6.1.4.1.2544.1.12.37.1.16.1.7	DisplayString	read-write	An optional textual description intended primarily for use with a peer or group.
BGP f3L3TrafficBgpPeerBgpSessionState	1.3.6.1.4.1.2544.1.12.37.1.16.1.8	BgpSessionStateType	read-only	This attribute indicates BGP session state.
U32 f3L3TrafficBgpPeerHoldTime	1.3.6.1.4.1.2544.1.12.37.1.16.1.9	Unsigned32	read-write	Time interval in seconds that a BGP session will be considered active in the absence of keepalive or other messages from the peer. The hold-time is typically set to 3x the keepalive-interval.
U32 f3L3TrafficBgpPeerStartupHoldTime	1.3.6.1.4.1.2544.1.12.37.1.16.1.10	Unsigned32	read-write	Value of the hold timer used before the routers have a chance to exchange open messages and agree on the real value.
U32 f3L3TrafficBgpPeerKeepAliveTime	1.3.6.1.4.1.2544.1.12.37.1.16.1.11	Unsigned32	read-write	Time interval in seconds between transmission of keepalive messages to the neighbor. Typically set to 1/3 the hold-time.
U32 f3L3TrafficBgpPeerConnectRetryTime	1.3.6.1.4.1.2544.1.12.37.1.16.1.12	Unsigned32	read-write	Time interval in seconds between attempts to establish a session with the peer.
IP f3L3TrafficBgpPeerUpdateSourceIp	1.3.6.1.4.1.2544.1.12.37.1.16.1.13	IpAddress	read-write	IP address used to update the source IP of BGP message transmitted. Normally loopback interface IP may be used to support loadsharing/redundancy between local and peer. Default value 0.0.0.0 implies no update.
NUM f3L3TrafficBgpPeerAuthenticationKey	1.3.6.1.4.1.2544.1.12.37.1.16.1.14	VariablePointer	read-write	Authentication Key used with neighboring devices.
U32 f3L3TrafficBgpPeerTimeSinceUpTransition	1.3.6.1.4.1.2544.1.12.37.1.16.1.15	Unsigned32	read-only	Number of seconds since last transition to Established state.
U32 f3L3TrafficBgpPeerTimeSinceDownTransition	1.3.6.1.4.1.2544.1.12.37.1.16.1.16	Unsigned32	read-only	Number of seconds since last transition out of Established state.
STO f3L3TrafficBgpPeerStorageType	1.3.6.1.4.1.2544.1.12.37.1.16.1.17	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficBgpPeerRowStatus	1.3.6.1.4.1.2544.1.12.37.1.16.1.18	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpPeerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpPeerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpPeerRowStatus object may be modified if the associated instance of this object is equal to active(1).
IPV f3L3TrafficBgpPeerIpVersion	1.3.6.1.4.1.2544.1.12.37.1.16.1.19	IpVersion	read-write	This attribute is supported on ge11x units.
ADR f3L3TrafficBgpPeerIpv6Address	1.3.6.1.4.1.2544.1.12.37.1.16.1.20	Ipv6Address	read-write	This attribute is supported on ge11x units.
ADR f3L3TrafficBgpPeerUpdateSourceIpv6	1.3.6.1.4.1.2544.1.12.37.1.16.1.21	Ipv6Address	read-write	This attribute is supported on ge11x units.
T/F f3L3TrafficBgpPeerMultihopControl	1.3.6.1.4.1.2544.1.12.37.1.16.1.22	TruthValue	read-write	This attribute is supported on ge11x units.
U32 f3L3TrafficBgpPeerMultihopTtl	1.3.6.1.4.1.2544.1.12.37.1.16.1.23	Unsigned32	read-write	This attribute is supported on ge11x units.
STR f3L3TrafficBgpPeerUpdateSourceInterface	1.3.6.1.4.1.2544.1.12.37.1.16.1.24	DisplayString	read-write	This attribute is supported on ge11x units.
BGP f3L3TrafficBgpPeerUpdateSourceType	1.3.6.1.4.1.2544.1.12.37.1.16.1.25	BgpUpdateSourceType	read-write	This attribute is supported on ge11x units.
U32 f3L3TrafficBgpPeerLocalPreference	1.3.6.1.4.1.2544.1.12.37.1.16.1.26	Unsigned32	read-write	This attribute is supported on ge11x/xgpro units.
T/F f3L3TrafficBgpPeerRouteReflectorClient	1.3.6.1.4.1.2544.1.12.37.1.16.1.27	TruthValue	read-write	This attribute is supported on ge11x/xgpro units.
IP f3L3TrafficBgpPeerRouteReflectorClusterId	1.3.6.1.4.1.2544.1.12.37.1.16.1.28	IpAddress	read-write	This attribute is supported on ge11x/xgpro units.
STR f3L3TrafficBgpPeerBgpRouteInboundFilter	1.3.6.1.4.1.2544.1.12.37.1.16.1.29	DisplayString	read-write	This is the name of the IP Prefix List that is used as the filter for Inbound. This is a read-write value. A null string implies there is no filter.
STR f3L3TrafficBgpPeerBgpRouteOutboundFilter	1.3.6.1.4.1.2544.1.12.37.1.16.1.30	DisplayString	read-write	This is the name of the IP Prefix List that is used as the filter for Inbound. This is a read-write value. A null string implies there is no filter.
BGP f3L3TrafficBgpPeerBgpGracefulRestart	1.3.6.1.4.1.2544.1.12.37.1.16.1.31	BgpGracefulRestartControlType	read-write	Enable or disable the graceful restart capability. Helper_only means the router does not support local restarting, but able to assist remote peer's restart..
U32 f3L3TrafficBgpPeerPeerRestartTime	1.3.6.1.4.1.2544.1.12.37.1.16.1.32	Unsigned32	read-only	The period of time (advertised by the peer) that the peer expects a restart of a BGP session to take..
T/F f3L3TrafficBgpPeerPeerRestarting	1.3.6.1.4.1.2544.1.12.37.1.16.1.33	TruthValue	read-only	This flag indicates whether the remote neighbor is currently in the process of restarting, and hence received routes are currently stale.
f3VrfOspfRouterTable	1.3.6.1.4.1.2544.1.12.37.1.17		not-accessible	OSPF Router.
f3VrfOspfRouterEntry	1.3.6.1.4.1.2544.1.12.37.1.17.1		not-accessible	A conceptual row in f3VrfOspfRouterTable.
U32 f3VrfOspfRouterIndex	1.3.6.1.4.1.2544.1.12.37.1.17.1.1	Unsigned32	not-accessible	The ID of OSPF Router instance.
ADM f3VrfOspfRouterAdminState	1.3.6.1.4.1.2544.1.12.37.1.17.1.2	AdminState	read-write	This object represents the Administrative State of the Traffic OSPF Router.
SEC f3VrfOspfRouterSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.17.1.3	SecondaryState	read-only	This object represents the Secondary State of the Traffic OSPF Router.
OPE f3VrfOspfRouterOperationalState	1.3.6.1.4.1.2544.1.12.37.1.17.1.4	OperationalState	read-only	This object represents the Operational State of the Traffic OSPF Router.
IP f3VrfOspfRouterId	1.3.6.1.4.1.2544.1.12.37.1.17.1.5	IpAddress	read-write	IP address used as Router ID for the OSPF protocol.
STR f3VrfOspfRouterDescription	1.3.6.1.4.1.2544.1.12.37.1.17.1.6	DisplayString	read-write	The description of OSPF router.
T/F f3VrfOspfRouterBgpRoutesRedistributeToOspf	1.3.6.1.4.1.2544.1.12.37.1.17.1.7	TruthValue	read-write	This attribute is used to control redistribution of dynamic routes learnt via BGP into OSPF.
ROU f3VrfOspfRouterBgpRoutesMetricType	1.3.6.1.4.1.2544.1.12.37.1.17.1.8	RoutesMetricType	read-write	Metric type of the BGP routes redistributed to OSPF.
U32 f3VrfOspfRouterBgpRoutesMetric	1.3.6.1.4.1.2544.1.12.37.1.17.1.9	Unsigned32	read-write	Metric value of the BGP routes redistributed to OSPF.
T/F f3VrfOspfRouterStaticRoutesRedistributeToOspf	1.3.6.1.4.1.2544.1.12.37.1.17.1.10	TruthValue	read-write	This attribute is used to control redistribution of static routes into OSPF.
ROU f3VrfOspfRouterStaticRoutesMetricType	1.3.6.1.4.1.2544.1.12.37.1.17.1.11	RoutesMetricType	read-write	Metric type of the static routes redistributed to OSPF.
U32 f3VrfOspfRouterStaticRoutesMetric	1.3.6.1.4.1.2544.1.12.37.1.17.1.12	Unsigned32	read-write	Metric value of the static routes redistributed to OSPF.
T/F f3VrfOspfRouterConnectedRoutesRedistributeToOspf	1.3.6.1.4.1.2544.1.12.37.1.17.1.13	TruthValue	read-write	This attribute is used to control redistribution of connected routes into OSPF.
ROU f3VrfOspfRouterConnectedRoutesMetricType	1.3.6.1.4.1.2544.1.12.37.1.17.1.14	RoutesMetricType	read-write	Metric type of the connected routes redistributed to OSPF.
U32 f3VrfOspfRouterConnectedRoutesMetric	1.3.6.1.4.1.2544.1.12.37.1.17.1.15	Unsigned32	read-write	Metric value of the connected routes redistributed to OSPF.
T/F f3VrfOspfRouterDhcpRoutesRedistributeToOspf	1.3.6.1.4.1.2544.1.12.37.1.17.1.16	TruthValue	read-write	This attribute is used to control redistribution of dynamic routes learnt via DHCP into OSPF.
ROU f3VrfOspfRouterDhcpRoutesMetricType	1.3.6.1.4.1.2544.1.12.37.1.17.1.17	RoutesMetricType	read-write	Metric type of the DHCP routes redistributed to OSPF.
U32 f3VrfOspfRouterDhcpRoutesMetric	1.3.6.1.4.1.2544.1.12.37.1.17.1.18	Unsigned32	read-write	Metric value of the DHCP routes redistributed to OSPF.
T/F f3VrfOspfRouterIsAbr	1.3.6.1.4.1.2544.1.12.37.1.17.1.19	TruthValue	read-only	.
T/F f3VrfOspfRouterIsAsbr	1.3.6.1.4.1.2544.1.12.37.1.17.1.20	TruthValue	read-only	.
STO f3VrfOspfRouterStorageType	1.3.6.1.4.1.2544.1.12.37.1.17.1.21	StorageType	read-create	The storage type for this conceptual row.
ROW f3VrfOspfRouterRowStatus	1.3.6.1.4.1.2544.1.12.37.1.17.1.22	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfOspfRouterRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfOspfRouterRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3VrfOspfRouterRowStatus object may be modified if the associated instance of this object is equal to active(1).
OSP f3VrfOspfRouterAction	1.3.6.1.4.1.2544.1.12.37.1.17.1.23	OspfRouterActionType	read-write	The Ospf Router action.
OSP f3VrfOspfRouterVersion	1.3.6.1.4.1.2544.1.12.37.1.17.1.24	OspfVersion	read-write	The version of the Ospf Router.
U32 f3VrfOspfRouterAdministrativeDistance	1.3.6.1.4.1.2544.1.12.37.1.17.1.25	Unsigned32	read-write	The Administrative Distance of the Ospf Router.
T/F f3VrfOspfRouterSlaacRoutesRedistributeToOspf	1.3.6.1.4.1.2544.1.12.37.1.17.1.26	TruthValue	read-write	This attribute is used to control redistribution of dynamic routes learnt via SLAAC into OSPF.
ROU f3VrfOspfRouterSlaacRoutesMetricType	1.3.6.1.4.1.2544.1.12.37.1.17.1.27	RoutesMetricType	read-write	Metric type of the SLAAC routes redistributed to OSPF.
U32 f3VrfOspfRouterSlaacRoutesMetric	1.3.6.1.4.1.2544.1.12.37.1.17.1.28	Unsigned32	read-write	Metric value of the SLAAC routes redistributed to OSPF.
U32 f3VrfOspfRouterEcmpMaximumPaths	1.3.6.1.4.1.2544.1.12.37.1.17.1.29	Unsigned32	read-write	The maximum number of path used in ECMP for OSPF routes.
T/F f3VrfOspfRouterSrControl	1.3.6.1.4.1.2544.1.12.37.1.17.1.30	TruthValue	read-write	Segment Routing Control.
U32 f3VrfOspfRouterConvergenceTime	1.3.6.1.4.1.2544.1.12.37.1.17.1.31	Unsigned32	read-write	Convergence Time.
f3L3TrafficOspfAreaTable	1.3.6.1.4.1.2544.1.12.37.1.18		not-accessible	Traffic OSPF Area.
f3L3TrafficOspfAreaEntry	1.3.6.1.4.1.2544.1.12.37.1.18.1		not-accessible	A conceptual row in f3L3TrafficOspfAreaTable.
U32 f3L3TrafficOspfAreaIndex	1.3.6.1.4.1.2544.1.12.37.1.18.1.1	Unsigned32	not-accessible	The ID of OSPF Area instance.
TRA f3L3TrafficOspfAreaType	1.3.6.1.4.1.2544.1.12.37.1.18.1.2	TrafficOspfAreaType	read-write	OSPF Area Type.
U32 f3L3TrafficOspfAreaDefaultCost	1.3.6.1.4.1.2544.1.12.37.1.18.1.3	Unsigned32	read-write	The cost of a default route propagated to stub area.
IP f3L3TrafficOspfAreaId	1.3.6.1.4.1.2544.1.12.37.1.18.1.4	IpAddress	read-write	The 32-bit number identifying the area.
STO f3L3TrafficOspfAreaStorageType	1.3.6.1.4.1.2544.1.12.37.1.18.1.5	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficOspfAreaRowStatus	1.3.6.1.4.1.2544.1.12.37.1.18.1.6	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficOspfAreaRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficOspfAreaRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficOspfAreaRowStatus object may be modified if the associated instance of this object is equal to active(1).
OSP f3L3TrafficOspfAreaAuthType	1.3.6.1.4.1.2544.1.12.37.1.18.1.7	OspfAuthType	read-write	This attribute is used to specify authentication type.
STR f3L3TrafficOspfAreaSimpleAuthKey	1.3.6.1.4.1.2544.1.12.37.1.18.1.8	DisplayString	read-write	The attribute is used to specify simple authentication key.
NUM f3L3TrafficOspfAreaCryptoKeyId	1.3.6.1.4.1.2544.1.12.37.1.18.1.9	VariablePointer	read-write	Authentication Key Id.
f3L3TrafficOspfAreaIfMemberTable	1.3.6.1.4.1.2544.1.12.37.1.19		not-accessible	OSPF Area Interface Member.
f3L3TrafficOspfAreaIfMemberEntry	1.3.6.1.4.1.2544.1.12.37.1.19.1		not-accessible	A conceptual row in f3L3TrafficOspfAreaIfMemberTable.
NUM f3L3TrafficOspfAreaIfMemberObject	1.3.6.1.4.1.2544.1.12.37.1.19.1.1	VariablePointer	not-accessible	OSPF Area Interface Member.
STO f3L3TrafficOspfAreaIfMemberStorageType	1.3.6.1.4.1.2544.1.12.37.1.19.1.2	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficOspfAreaIfMemberRowStatus	1.3.6.1.4.1.2544.1.12.37.1.19.1.3	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficOspfAreaIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficOspfAreaIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficOspfAreaIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3VrfLoopbackInterfaceTable	1.3.6.1.4.1.2544.1.12.37.1.20		not-accessible	.
f3VrfLoopbackInterfaceEntry	1.3.6.1.4.1.2544.1.12.37.1.20.1		not-accessible	A conceptual row in f3VrfLoopbackInterfaceTable.
U32 f3VrfLoopbackInterfaceIndex	1.3.6.1.4.1.2544.1.12.37.1.20.1.1	Unsigned32	not-accessible	.
STR f3VrfLoopbackInterfaceName	1.3.6.1.4.1.2544.1.12.37.1.20.1.2	DisplayString	read-write	.
IP f3VrfLoopbackInterfaceIpAddress	1.3.6.1.4.1.2544.1.12.37.1.20.1.3	IpAddress	read-write	.
IP f3VrfLoopbackInterfaceNetMask	1.3.6.1.4.1.2544.1.12.37.1.20.1.4	IpAddress	read-write	.
U32 f3VrfLoopbackInterfaceCIRLo	1.3.6.1.4.1.2544.1.12.37.1.20.1.5	Unsigned32	read-write	.
U32 f3VrfLoopbackInterfaceCIRHi	1.3.6.1.4.1.2544.1.12.37.1.20.1.6	Unsigned32	read-write	.
STO f3VrfLoopbackInterfaceStorageType	1.3.6.1.4.1.2544.1.12.37.1.20.1.7	StorageType	read-create	The storage type for this conceptual row.
ROW f3VrfLoopbackInterfaceRowStatus	1.3.6.1.4.1.2544.1.12.37.1.20.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3VrfLoopbackInterfaceRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3VrfLoopbackInterfaceRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3VrfLoopbackInterfaceRowStatus object may be modified if the associated instance of this object is equal to active(1).
IPM f3VrfLoopbackInterfaceIpMode	1.3.6.1.4.1.2544.1.12.37.1.20.1.9	IpMode	read-write	This object means the ip mode for the interface.
ADR f3VrfLoopbackInterfaceIpv6Address	1.3.6.1.4.1.2544.1.12.37.1.20.1.10	Ipv6Address	read-write	This object means the ipv6 address for the interface.
I32 f3VrfLoopbackInterfaceIpv6AddrPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.20.1.11	Integer32	read-write	This object means the ipv6 address prefix length for the interface.
f3L3TrafficOspfAsLsDbTable	1.3.6.1.4.1.2544.1.12.37.1.21		not-accessible	OSPF AS Link State Database. Must set f3VrfOspfRouterAction as optimizeOspfAsLsDbRetrieve(1) before get data from this table.
f3L3TrafficOspfAsLsDbEntry	1.3.6.1.4.1.2544.1.12.37.1.21.1		not-accessible	A conceptual row in the f3L3TrafficOspfAsLsDbTable. Entries can be created/deleted in this table by management application action.
OSP f3L3TrafficOspfAsLsDbType	1.3.6.1.4.1.2544.1.12.37.1.21.1.1	OspfAsLsaType	not-accessible	LSA Type.
IP f3L3TrafficOspfAsLsDbId	1.3.6.1.4.1.2544.1.12.37.1.21.1.2	IpAddress	not-accessible	Link State ID.
IP f3L3TrafficOspfAsLsDbRouterId	1.3.6.1.4.1.2544.1.12.37.1.21.1.3	IpAddress	not-accessible	LSA advertising router.
U32 f3L3TrafficOspfAsLsDbChecksum	1.3.6.1.4.1.2544.1.12.37.1.21.1.4	Unsigned32	read-only	The checksum associated with Link State Advertisement.
U32 f3L3TrafficOspfAsLsDbSeqNum	1.3.6.1.4.1.2544.1.12.37.1.21.1.5	Unsigned32	read-only	The Sequence Number associated with the last LSA.
U32 f3L3TrafficOspfAsLsDbAge	1.3.6.1.4.1.2544.1.12.37.1.21.1.6	Unsigned32	read-only	The age, in seconds, since this LSA was last received.
f3L3TrafficOspfLsDbTable	1.3.6.1.4.1.2544.1.12.37.1.22		not-accessible	OSPF Link State database. Must set f3VrfOspfRouterAction as optimizeOspfLsDbRetrieve(2) before get data from this table.
f3L3TrafficOspfLsDbEntry	1.3.6.1.4.1.2544.1.12.37.1.22.1		not-accessible	A conceptual row in the f3L3TrafficOspfLsDbTable. Entries can be created/deleted in this table by management application action.
OSP f3L3TrafficOspfLsDbType	1.3.6.1.4.1.2544.1.12.37.1.22.1.1	OspfLsaType	not-accessible	LSA Type.
IP f3L3TrafficOspfLsDbId	1.3.6.1.4.1.2544.1.12.37.1.22.1.2	IpAddress	not-accessible	Link State ID.
IP f3L3TrafficOspfLsDbRouterId	1.3.6.1.4.1.2544.1.12.37.1.22.1.3	IpAddress	not-accessible	Advertising Router ID.
IP f3L3TrafficOspfLsDbAreaId	1.3.6.1.4.1.2544.1.12.37.1.22.1.4	IpAddress	not-accessible	Area ID.
U32 f3L3TrafficOspfLsDbChecksum	1.3.6.1.4.1.2544.1.12.37.1.22.1.5	Unsigned32	read-only	The checksum associated with Link State Advertisement.
U32 f3L3TrafficOspfLsDbSeqNum	1.3.6.1.4.1.2544.1.12.37.1.22.1.6	Unsigned32	read-only	The Sequence Number associated with the last LSA.
U32 f3L3TrafficOspfLsDbAge	1.3.6.1.4.1.2544.1.12.37.1.22.1.7	Unsigned32	read-only	The age, in seconds, since this LSA was last received.
f3L3TrafficOspfNeighborTable	1.3.6.1.4.1.2544.1.12.37.1.23		not-accessible	OSPF neighbor table. Must set f3VrfOspfRouterAction as optimizeOspfNeighborRetrieve(3) before get data from this table.
f3L3TrafficOspfNeighborEntry	1.3.6.1.4.1.2544.1.12.37.1.23.1		not-accessible	A conceptual row in the f3L3TrafficOspfNeighborTable. Entries can be created/deleted in this table by management application action.
IP f3L3TrafficOspfNeighborIpAddress	1.3.6.1.4.1.2544.1.12.37.1.23.1.1	IpAddress	not-accessible	Address of interface of neighbor.
NUM f3L3TrafficOspfNeighborInterface	1.3.6.1.4.1.2544.1.12.37.1.23.1.2	VariablePointer	read-only	The local interface which discovers the neighbor.
IP f3L3TrafficOspfNeighborRouterId	1.3.6.1.4.1.2544.1.12.37.1.23.1.3	IpAddress	read-only	Router ID of the neighbor.
OSP f3L3TrafficOspfNeighborState	1.3.6.1.4.1.2544.1.12.37.1.23.1.4	OspfAdjacencyState	read-only	State of Link State Database synchronization with the neighbor.
TRA f3L3TrafficOspfNeighborRole	1.3.6.1.4.1.2544.1.12.37.1.23.1.5	TrafficOspfRole	read-only	Role of the neighbor. DR, DR other and Backup are applicable.
U32 f3L3TrafficOspfNeighborPriority	1.3.6.1.4.1.2544.1.12.37.1.23.1.6	Unsigned32	read-only	The priority of the neighbor.
U32 f3L3TrafficOspfNeighborDeadTime	1.3.6.1.4.1.2544.1.12.37.1.23.1.7	Unsigned32	read-only	The Dead Time field indicates the amount of time remaining that the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.
STR f3L3TrafficOspfNeighborLocalInterfaceName	1.3.6.1.4.1.2544.1.12.37.1.23.1.8	DisplayString	read-only	The name of local interface which discovers the neighbor.
f3L3TrafficIPInterfaceOspfTable	1.3.6.1.4.1.2544.1.12.37.1.25		not-accessible	OSPF Traffic IP Interface Attributes.
f3L3TrafficIPInterfaceOspfEntry	1.3.6.1.4.1.2544.1.12.37.1.25.1		not-accessible	A conceptual row in the f3L3TrafficIPInterfaceOspfTable.
IP f3L3TrafficIPIfOspfAreaId	1.3.6.1.4.1.2544.1.12.37.1.25.1.1	IpAddress	read-only	A 32-bit number identifying the area.
U32 f3L3TrafficIPIfOspfCost	1.3.6.1.4.1.2544.1.12.37.1.25.1.2	Unsigned32	read-write	The cost of the route during the SPF calculation.
OSP f3L3TrafficIPIfOspfIfType	1.3.6.1.4.1.2544.1.12.37.1.25.1.3	OspfIfType	read-write	Interface network type.
U32 f3L3TrafficIPIfOspfRtrPriority	1.3.6.1.4.1.2544.1.12.37.1.25.1.4	Unsigned32	read-write	An 8-bit unsigned integer, used for DR and BDR election, may be default. 0 means not to attend DR election.
U32 f3L3TrafficIPIfOspfHelloInterval	1.3.6.1.4.1.2544.1.12.37.1.25.1.5	Unsigned32	read-write	The interval in seconds between Hello Packets that the router sends on the interface.
U32 f3L3TrafficIPIfOspfDeadInterval	1.3.6.1.4.1.2544.1.12.37.1.25.1.6	Unsigned32	read-write	The number of seconds before the router's neighbors will declare it down, when they stop hearing the router's Hello Packets.
U32 f3L3TrafficIPIfOspfTransmitDelay	1.3.6.1.4.1.2544.1.12.37.1.25.1.7	Unsigned32	read-write	2~65535 Default 2s The estimated number of seconds it takes to transmit a Link State Update Packet over this interface. LSAs contained in the Link State update packet will have their age incremented by this amount before transmission. This value should take into account transmission and propagation delays; it must be greater than 1.
U32 f3L3TrafficIPIfOspfRetransmitInterval	1.3.6.1.4.1.2544.1.12.37.1.25.1.8	Unsigned32	read-write	The number of seconds between LSA retransmissions, for adjacencies belonging to this interface. Also used when retransmitting Database Description and Link State Request Packets.
NUM f3L3TrafficIPIfOspfState	1.3.6.1.4.1.2544.1.12.37.1.25.1.9	OspfInterfaceState	read-only	OSPF Interface state.
IP f3L3TrafficIPIfOspfDesignatedRouterId	1.3.6.1.4.1.2544.1.12.37.1.25.1.10	IpAddress	read-only	Designated Router IP interface on the Network.
IP f3L3TrafficIPIfOspfBackupDesignatedRouterId	1.3.6.1.4.1.2544.1.12.37.1.25.1.11	IpAddress	read-only	Backup Designated Router IP interface on the Network.
OSP f3L3TrafficIPIfOspfAuthType	1.3.6.1.4.1.2544.1.12.37.1.25.1.12	OspfAuthType	read-write	This attribute is used to specify authentication type. Simple: 64-bits clear password inserted into OSPF packets header. None: No authentication is used. Cryptographic: a shared secret which enables the generation/verification of message digests which are appended to the OSPF protocol packets.
STR f3L3TrafficIPIfOspfSimpleAuthKey	1.3.6.1.4.1.2544.1.12.37.1.25.1.13	DisplayString	read-write	Authentication key.
NUM f3L3TrafficIPIfospfCryptoKeyId	1.3.6.1.4.1.2544.1.12.37.1.25.1.14	VariablePointer	read-write	Crypto key Id.
f3L3TrafficIPv6InterfaceTable	1.3.6.1.4.1.2544.1.12.37.1.26		not-accessible	A list of entries for the L3 Traffic IPv6 Interface.
f3L3TrafficIPv6InterfaceEntry	1.3.6.1.4.1.2544.1.12.37.1.26.1		not-accessible	A conceptual row in the f3L3TrafficIPv6InterfaceTable.
I32 f3L3TrafficIPv6IfIndex	1.3.6.1.4.1.2544.1.12.37.1.26.1.1	Integer32	not-accessible	It specifies the traffic IPv6 interface number.
STR f3L3TrafficIPv6IfName	1.3.6.1.4.1.2544.1.12.37.1.26.1.2	DisplayString	read-write	It specifies the traffic IPv6 interface name.
ADM f3L3TrafficIPv6IfAdminState	1.3.6.1.4.1.2544.1.12.37.1.26.1.3	AdminState	read-write	This object represents the Administrative State of the interface.
SEC f3L3TrafficIPv6IfSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.26.1.4	SecondaryState	read-only	This object represents the Secondary State of the interface.
OPE f3L3TrafficIPv6IfOperationalState	1.3.6.1.4.1.2544.1.12.37.1.26.1.5	OperationalState	read-only	This object represents the Operational State of the interface.
NUM f3L3TrafficIPv6IfType	1.3.6.1.4.1.2544.1.12.37.1.26.1.6	IpInterfaceType	read-write	This object represents the type of the interface.
ADR f3L3TrafficIPv6IfLinkLocalAddr	1.3.6.1.4.1.2544.1.12.37.1.26.1.7	Ipv6Address	read-write	Link-local Address.
ADR f3L3TrafficIPv6IfLinkLocalAddrMode	1.3.6.1.4.1.2544.1.12.37.1.26.1.8	Ipv6LinkLocalAddressMode	read-write	The assignment mode of IPv6 Link-Local Address, only manual and automatic are applicable.
I32 f3L3TrafficIPv6IfMtu	1.3.6.1.4.1.2544.1.12.37.1.26.1.9	Integer32	read-only	This is the MTU for IPv6 Traffic interface.
T/F f3L3TrafficIPv6IfStatelessAddrAutoconfigEnabled	1.3.6.1.4.1.2544.1.12.37.1.26.1.10	TruthValue	read-write	This is the control to enable or disable stateless address auto configuration.
ADR f3L3TrafficIPv6IfDefaultGateway	1.3.6.1.4.1.2544.1.12.37.1.26.1.11	Ipv6Address	read-write	indicates active default GW of the interface.
I32 f3L3TrafficIPv6IfIcmpErrorMsgRateLimit	1.3.6.1.4.1.2544.1.12.37.1.26.1.12	Integer32	read-write	limit originated ICMP error messages rate in number of messages per second. The value 0xFFFF shall be used to indicate no error message limit.
CMD f3L3TrafficIPv6IfDhcpRole	1.3.6.1.4.1.2544.1.12.37.1.26.1.13	CmDhcpRole	read-write	Allows setting the DHCPv6 role on this interface.
T/F f3L3TrafficIPv6IfDhcpEnabled	1.3.6.1.4.1.2544.1.12.37.1.26.1.14	TruthValue	read-write	Allows enabling/disabling of DHCPv6 on this interface.
T/F f3L3TrafficIPv6IfDhcpRapidCommitControlEnabled	1.3.6.1.4.1.2544.1.12.37.1.26.1.15	TruthValue	read-write	This is the control to enable or disable DHCP rapid commit.
U32 f3L3TrafficIPv6IfMaxRAInterval	1.3.6.1.4.1.2544.1.12.37.1.26.1.16	Unsigned32	read-write	Maximum time in seconds between generated RA messages.
U32 f3L3TrafficIPv6IfMinRAInterval	1.3.6.1.4.1.2544.1.12.37.1.26.1.17	Unsigned32	read-write	Minimum time in seconds between generated RA messages, should be less than 0.75* max-ra-interval.
U32 f3L3TrafficIPv6IfRouterLifeTime	1.3.6.1.4.1.2544.1.12.37.1.26.1.18	Unsigned32	read-write	Time in seconds the router can be used as a default router, should be larger than max-ra-interval.
U32 f3L3TrafficIPv6IfReachableTime	1.3.6.1.4.1.2544.1.12.37.1.26.1.19	Unsigned32	read-write	time in milliseconds, that a node assumes a neighbor is reachable after having received a reachability confirmation, 0 means unspecified.
T/F f3L3TrafficIPv6IfRaDhcpMoreConfigEnabled	1.3.6.1.4.1.2544.1.12.37.1.26.1.20	TruthValue	read-write	RA More configurations via DHCP.
T/F f3L3TrafficIPv6IfRaManagedAddressConfigEnabled	1.3.6.1.4.1.2544.1.12.37.1.26.1.21	TruthValue	read-write	RA Managed Address Config Control.
T/F f3L3TrafficIPv6IfRaRDNSSOptionEnabled	1.3.6.1.4.1.2544.1.12.37.1.26.1.22	TruthValue	read-write	Control Recursive DNS server option presence in the RA messages.
U32 f3L3TrafficIPv6IfRaRDNSSLifeTime	1.3.6.1.4.1.2544.1.12.37.1.26.1.23	Unsigned32	read-write	Set the Lifetime field of the RDNSS option.
STR f3L3TrafficIPv6IfRaDNSSList	1.3.6.1.4.1.2544.1.12.37.1.26.1.24	DisplayString	read-write	list of IPv6 addresses of DNS servers.
NDP f3L3TrafficIPv6IfRaDefaultRouterPreference	1.3.6.1.4.1.2544.1.12.37.1.26.1.25	NdpRaDefaultRouterPreference	read-write	Specifies Default Router preference field in RA according to RFC4191.
T/F f3L3TrafficIPv6IfDupAddrDetectControl	1.3.6.1.4.1.2544.1.12.37.1.26.1.26	TruthValue	read-write	Allows enabling/disabling of DAD on this interface.
U32 f3L3TrafficIPv6IfDupAddrDetectTransmits	1.3.6.1.4.1.2544.1.12.37.1.26.1.27	Unsigned32	read-write	Specify number of consequent NS messages sent by this interface.
U32 f3L3TrafficIPv6IfDupAddrDetectRetransTimer	1.3.6.1.4.1.2544.1.12.37.1.26.1.28	Unsigned32	read-write	Interval in ms between consecutive NS messages and as well as the time a node waits after sending the last NS before ending the DAD.
STO f3L3TrafficIPv6IfStorageType	1.3.6.1.4.1.2544.1.12.37.1.26.1.29	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPv6IfRowStatus	1.3.6.1.4.1.2544.1.12.37.1.26.1.30	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6IfRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6IfRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6IfRowStatus object may be modified if the associated instance of this object is equal to active(1).
NUM f3L3TrafficIPv6IfAction	1.3.6.1.4.1.2544.1.12.37.1.26.1.31	TrafficIpv6InterfaceActionType	read-write	This objects describes action set on this traffic ip interface.
f3L3TrafficIPv6AddressTable	1.3.6.1.4.1.2544.1.12.37.1.27		not-accessible	Traffic IPv6 interface address table.
f3L3TrafficIPv6AddressEntry	1.3.6.1.4.1.2544.1.12.37.1.27.1		not-accessible	A conceptual row in the f3L3TrafficIPv6AddressTable.
I32 f3L3TrafficIPv6AddrIndex	1.3.6.1.4.1.2544.1.12.37.1.27.1.1	Integer32	not-accessible	The unique integer index value corresponding to a traffic ipv6 interface unicast address.
ADR f3L3TrafficIPv6AddrAssignMode	1.3.6.1.4.1.2544.1.12.37.1.27.1.2	Ipv6AddressAssignMode	read-write	The assignment mode of IPv6 Unicast Address.
ADR f3L3TrafficIPv6AddrUnicastAddr	1.3.6.1.4.1.2544.1.12.37.1.27.1.3	Ipv6Address	read-write	This is IPv6 Unicast Address.
I32 f3L3TrafficIPv6AddrUnicastAddrPrefixLength	1.3.6.1.4.1.2544.1.12.37.1.27.1.4	Integer32	read-write	This is prefix length of the unicast address.
STR f3L3TrafficIPv6AddrUnicastAddrAutoGenPrefix	1.3.6.1.4.1.2544.1.12.37.1.27.1.5	DisplayString	read-write	This is prefix of the unicast address in automatic address assignment mode.
STO f3L3TrafficIPv6AddrStorageType	1.3.6.1.4.1.2544.1.12.37.1.27.1.6	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPv6AddrRowStatus	1.3.6.1.4.1.2544.1.12.37.1.27.1.7	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6AddrRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6AddrRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6AddrRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIPv6PrefixTable	1.3.6.1.4.1.2544.1.12.37.1.28		not-accessible	Traffic IPv6 RA prefix table.
f3L3TrafficIPv6PrefixEntry	1.3.6.1.4.1.2544.1.12.37.1.28.1		not-accessible	A conceptual row in f3L3TrafficIPv6PrefixTable.
I32 f3L3TrafficIPv6PrefixIndex	1.3.6.1.4.1.2544.1.12.37.1.28.1.1	Integer32	not-accessible	The unique integer index value corresponding to a traffic ipv6 interface ra prefix.
T/F f3L3TrafficIPv6PrefixRaPrefixAdvEnabled	1.3.6.1.4.1.2544.1.12.37.1.28.1.2	TruthValue	read-write	This attribute is to enable to Advertise prefix to link in router mode.
ADR f3L3TrafficIPv6PrefixRaPrefix	1.3.6.1.4.1.2544.1.12.37.1.28.1.3	Ipv6Address	read-write	This is the IPv6 Prefix to be dispatched to the link in Router mode.
I32 f3L3TrafficIPv6PrefixRaPrefixLength	1.3.6.1.4.1.2544.1.12.37.1.28.1.4	Integer32	read-write	Prefix length.
U32 f3L3TrafficIPv6PrefixValidLifeTime	1.3.6.1.4.1.2544.1.12.37.1.28.1.5	Unsigned32	read-write	This attribute is used to specify fixed Valid lifetime of distributed prefix in seconds All ones may be set for unlimited lifetime.
U32 f3L3TrafficIPv6PrefixPreferredLifeTime	1.3.6.1.4.1.2544.1.12.37.1.28.1.6	Unsigned32	read-write	This attribute is used to specify fixed time interval for unrestricted use of prefix. When this time has been expired the address is considered as deprecated as specified in RFC4862 Preferred lifetime shall not be greater than the Valid Lifetime. All ones may be set for unlimited lifetime.
STO f3L3TrafficIPv6PrefixStorageType	1.3.6.1.4.1.2544.1.12.37.1.28.1.7	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPv6PrefixRowStatus	1.3.6.1.4.1.2544.1.12.37.1.28.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6PrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6PrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6PrefixRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIPv6NdpTable	1.3.6.1.4.1.2544.1.12.37.1.29		not-accessible	Traffic IPv6 NDP table.
f3L3TrafficIPv6NdpEntry	1.3.6.1.4.1.2544.1.12.37.1.29.1		not-accessible	A conceptual row in f3L3TrafficIPv6NdpTable.
ADR f3L3TrafficIPv6NdpIPv6Addr	1.3.6.1.4.1.2544.1.12.37.1.29.1.1	Ipv6Address	not-accessible	This is the IP address of the NDP Entry.
STR f3L3TrafficIPv6NdpInterface	1.3.6.1.4.1.2544.1.12.37.1.29.1.2	DisplayString	read-create	This is the IP interface for the NDP Entry.
MAC f3L3TrafficIPv6NdpMacAddress	1.3.6.1.4.1.2544.1.12.37.1.29.1.3	MacAddress	read-create	This is the MAC address of the NDP Entry.
IPE f3L3TrafficIPv6NdpType	1.3.6.1.4.1.2544.1.12.37.1.29.1.4	IpEntryType	read-create	The type of NDP Entry. Note that static entries can be created.
NDP f3L3TrafficIPv6NdpReachabilityState	1.3.6.1.4.1.2544.1.12.37.1.29.1.5	NdpNeighborReachabilityState	read-only	This is the reachability state of the NDP Entry.
I32 f3L3TrafficIPv6NdpAge	1.3.6.1.4.1.2544.1.12.37.1.29.1.6	Integer32	read-only	Indicates entry age in seconds.
STO f3L3TrafficIPv6NdpStorageType	1.3.6.1.4.1.2544.1.12.37.1.29.1.7	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPv6NdpRowStatus	1.3.6.1.4.1.2544.1.12.37.1.29.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPv6NdpRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPv6NdpRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPv6NdpRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIpv6RouteTable	1.3.6.1.4.1.2544.1.12.37.1.30		not-accessible	A list of entries for the L3 Traffic Ipv6 route. Must set f3VrfActionX as optimizeIpv6RouteRetrieve(7) before get data from this table.
f3L3TrafficIpv6RouteEntry	1.3.6.1.4.1.2544.1.12.37.1.30.1		not-accessible	A conceptual row in the f3L3TrafficIpv6RouteTable.
ADR f3L3TrafficIpv6RouteDest	1.3.6.1.4.1.2544.1.12.37.1.30.1.1	Ipv6Address	not-accessible	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the static-route-mask attribute is not equal to x.
I32 f3L3TrafficIpv6RoutePrefixLength	1.3.6.1.4.1.2544.1.12.37.1.30.1.2	Integer32	not-accessible	Indicate the mask to be logically ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the static route mask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical AND of x with the value of the corresponding instance of the static-route-dest attribute is not equal to static route destination.
ADR f3L3TrafficIpv6RouteGateway	1.3.6.1.4.1.2544.1.12.37.1.30.1.3	Ipv6Address	not-accessible	The address of the next router en route.
STR f3L3TrafficIpv6RouteInterface	1.3.6.1.4.1.2544.1.12.37.1.30.1.4	DisplayString	not-accessible	Name of the IP interface for the interface static route.
I32 f3L3TrafficIpv6RouteMetric	1.3.6.1.4.1.2544.1.12.37.1.30.1.5	Integer32	read-write	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1.
IPE f3L3TrafficIpv6RouteType	1.3.6.1.4.1.2544.1.12.37.1.30.1.6	IpEntryType	read-create	Indicates it is dynamic or static route.
T/F f3L3TrafficIpv6RouteAdvertise	1.3.6.1.4.1.2544.1.12.37.1.30.1.7	TruthValue	read-create	Indicates whether this static route will be advertised via routing protocol.
TRA f3L3TrafficIpv6RouteStatus	1.3.6.1.4.1.2544.1.12.37.1.30.1.8	TrafficIpRouteStatus	read-only	It specifies the traffic Ipv6 route status.
ROU f3L3TrafficIpv6RouteFlags	1.3.6.1.4.1.2544.1.12.37.1.30.1.9	RouteFlags	read-only	It specifies the traffic Ipv6 route flags.
NUM f3L3TrafficIpv6RouteOrigin	1.3.6.1.4.1.2544.1.12.37.1.30.1.10	TrafficIpRouteOriginType	read-only	The origin of IP Route.
STO f3L3TrafficIpv6RouteStorageType	1.3.6.1.4.1.2544.1.12.37.1.30.1.11	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIpv6RouteRowStatus	1.3.6.1.4.1.2544.1.12.37.1.30.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv6RouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv6RouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv6RouteRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3DhcpV6RelayAgentTable	1.3.6.1.4.1.2544.1.12.37.1.31		not-accessible	A list of entries for the Dhcp V6 Relay Agent.
f3DhcpV6RelayAgentEntry	1.3.6.1.4.1.2544.1.12.37.1.31.1		not-accessible	A conceptual row in the f3DhcpV6RelayAgentTable.
I32 f3DhcpV6RelayAgentIndex	1.3.6.1.4.1.2544.1.12.37.1.31.1.1	Integer32	not-accessible	The integer index value describes the dhcp-relay-agent index.
STR f3DhcpV6RelayAgentAlias	1.3.6.1.4.1.2544.1.12.37.1.31.1.2	F3DisplayString	read-write	The DHCP relay agent alias.
ADM f3DhcpV6RelayAgentAdminState	1.3.6.1.4.1.2544.1.12.37.1.31.1.3	AdminState	read-write	This object represents the Administrative State of the agent.
SEC f3DhcpV6RelayAgentSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.31.1.4	SecondaryState	read-only	This object represents the Secondary State of the agent.
OPE f3DhcpV6RelayAgentOperationalState	1.3.6.1.4.1.2544.1.12.37.1.31.1.5	OperationalState	read-only	This object represents the Operational State of the agent.
ADR f3DhcpV6RelayAgentServerIpAddress	1.3.6.1.4.1.2544.1.12.37.1.31.1.6	Ipv6Address	read-write	The Ipv6 address of this DCHP relay agent.
NUM f3DhcpV6RelayAgentServerIpInteface	1.3.6.1.4.1.2544.1.12.37.1.31.1.7	VariablePointer	read-write	This object describes the server Ip Interface.
STO f3DhcpV6RelayAgentStorageType	1.3.6.1.4.1.2544.1.12.37.1.31.1.8	StorageType	read-create	The storage type for this conceptual row.
ROW f3DhcpV6RelayAgentRowStatus	1.3.6.1.4.1.2544.1.12.37.1.31.1.9	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpV6RelayAgentRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpV6RelayAgentRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3DhcpV6RelayAgentRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3DhcpV6RelayAgentClientTrafficIpIfMemberTable	1.3.6.1.4.1.2544.1.12.37.1.32		not-accessible	A list of entries for the Dhcp V6 Relay Agent Client Traffic Ip Interface member.
f3DhcpV6RelayAgentClientTrafficIpIfMemberEntry	1.3.6.1.4.1.2544.1.12.37.1.32.1		not-accessible	A conceptual row in the f3DhcpV6RelayAgentClientTrafficIpIfMemberTable.
NUM f3DhcpV6RelayAgentClientTrafficIpIfMemberObject	1.3.6.1.4.1.2544.1.12.37.1.32.1.1	VariablePointer	not-accessible	This object describes the Client traffic ip interface.
STO f3DhcpV6RelayAgentClientTrafficIpIfMemberStorageType	1.3.6.1.4.1.2544.1.12.37.1.32.1.2	StorageType	read-create	The type of storage configured for this entry.
ROW f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus	1.3.6.1.4.1.2544.1.12.37.1.32.1.3	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3DhcpV6RelayAgentClientTrafficIpIfMemberRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmL3FlowPointTable	1.3.6.1.4.1.2544.1.12.37.1.33		not-accessible	A list of entries for the L3 flowpoint.
cmL3FlowPointEntry	1.3.6.1.4.1.2544.1.12.37.1.33.1		not-accessible	A conceptual row in the cmL3FlowPointTable.
I32 cmL3FlowPointPortIndex	1.3.6.1.4.1.2544.1.12.37.1.33.1.1	Integer32	not-accessible	The port number value.
I32 cmL3FlowPointIndex	1.3.6.1.4.1.2544.1.12.37.1.33.1.2	Integer32	not-accessible	The L3 flow point number.
STR cmL3FlowPointAlias	1.3.6.1.4.1.2544.1.12.37.1.33.1.3	F3DisplayString	read-write	This object describes the L3 flow point alias.
ADM cmL3FlowPointAdminState	1.3.6.1.4.1.2544.1.12.37.1.33.1.4	AdminState	read-write	This object describes the L3 flow point admin state.
SEC cmL3FlowPointSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.33.1.5	SecondaryState	read-only	This object describes the L3 flow point secondary state.
OPE cmL3FlowPointOperationalState	1.3.6.1.4.1.2544.1.12.37.1.33.1.6	OperationalState	read-only	This object describes the L3 flow point operational state.
T/F cmL3FlowPointMultiCOSEnabled	1.3.6.1.4.1.2544.1.12.37.1.33.1.7	TruthValue	read-write	Control to enable or disable per-COS BWPs on a FlowPoint. ENABLED:per-COS BWPs (CIR, EIR, CBS, EBS, CM, CF) are applied as a policing function for all ingress frames of this flowpoint. DISABLED:per-Flow BWP (CIR, EIR, CBS, EBS, CM, CF) is applied as a policing function for all ingress frames of this flowpoint. User must independently enable each COS BWP when ENABLED.
I32 cmL3FlowPointCOS	1.3.6.1.4.1.2544.1.12.37.1.33.1.8	Integer32	read-write	Identifies the internal COS applied to all ingress frames of the flowpoint.
T/F cmL3FlowPointUntaggedMemberShipEnabled	1.3.6.1.4.1.2544.1.12.37.1.33.1.9	TruthValue	read-write	This attribute controls untagged frames membership for the Flowpoint. ENABLED: Ingress untagged frame matches Flowpoint membership. DISABLED: Ingress untagged frame does not match Flowpoint membership.
T/F cmL3FlowPointOuterTagMemberShipEnabled	1.3.6.1.4.1.2544.1.12.37.1.33.1.10	TruthValue	read-write	This attribute controls outer tag membership for the Flowpoint whether enabled.
VLA cmL3FlowPointOuterTagMemberShipVlanId	1.3.6.1.4.1.2544.1.12.37.1.33.1.11	VlanId	read-write	This attribute controls outer tag VlanId membership for the Flowpoint.
T/F cmL3FlowPointInnerTagMemberShipEnabled	1.3.6.1.4.1.2544.1.12.37.1.33.1.12	TruthValue	read-write	This attribute controls inner tag membership for the Flowpoint whether enabled.
VLA cmL3FlowPointInnerTagMemberShipVlanId	1.3.6.1.4.1.2544.1.12.37.1.33.1.13	VlanId	read-write	This attribute controls inner tag VlanId membership for the Flowpoint.
T/F cmL3FlowPointFragmentedPktsFwdEnabled	1.3.6.1.4.1.2544.1.12.37.1.33.1.14	TruthValue	read-write	This attribute specifies whether received IP Packets with More Fragments flag should be forwarded by the FlowPoint.
T/F cmL3FlowPointHCosMgmtEnabled	1.3.6.1.4.1.2544.1.12.37.1.33.1.15	TruthValue	read-write	This attribute specifies whether the Hierarchical COS shaping enabled for this flow point.
U32 cmL3FlowPointHCosGuaranteedBwHi	1.3.6.1.4.1.2544.1.12.37.1.33.1.16	Unsigned32	read-write	This attribute specifies the Hierarchical COS guarranteed bandwidth high 32 bits for this flow point.
U32 cmL3FlowPointHCosGuaranteedBwLo	1.3.6.1.4.1.2544.1.12.37.1.33.1.17	Unsigned32	read-write	This attribute specifies the Hierarchical COS guarranteed bandwidth low 32 bits for this flow point.
U32 cmL3FlowPointHCosMaximumBwHi	1.3.6.1.4.1.2544.1.12.37.1.33.1.18	Unsigned32	read-write	This attribute specifies the Hierarchical COS maximum bandwidth high 32 bits for this flow point.
U32 cmL3FlowPointHCosMaximumBwLo	1.3.6.1.4.1.2544.1.12.37.1.33.1.19	Unsigned32	read-write	This attribute specifies the Hierarchical COS maximum bandwidth low 32 bits for this flow point.
T/F cmL3FlowPointDscpOverwriteControl	1.3.6.1.4.1.2544.1.12.37.1.33.1.20	TruthValue	read-write	This attribute allows enable dscp value overwrite.
NUM cmL3FlowPointPriMapProfile	1.3.6.1.4.1.2544.1.12.37.1.33.1.21	VariablePointer	read-write	This attribute allows specify the priority map profile.
STO cmL3FlowPointStorageType	1.3.6.1.4.1.2544.1.12.37.1.33.1.22	StorageType	read-create	The type of storage configured for this entry.
ROW cmL3FlowPointRowStatus	1.3.6.1.4.1.2544.1.12.37.1.33.1.23	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmL3FlowPointRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmL3FlowPointRowStatus value as createAndGo(4). Upon successful row creation, this variable has a value of active(1). The cmL3FlowPointRowStatus object may be modified if the associated instance of this object is equal to active(1).
ACL cmL3FlowPointAclNoMatchDisposition	1.3.6.1.4.1.2544.1.12.37.1.33.1.24	AclNoMatchDispositionType	read-write	This attribute allows specify ACL no match disposition type
I32 cmL3FlowPointWfqSegmentationCOS	1.3.6.1.4.1.2544.1.12.37.1.33.1.25	Integer32	read-write	This object is used to specify wfq segmentation COS value.
I32 cmL3FlowPointWfqGroupCOS	1.3.6.1.4.1.2544.1.12.37.1.33.1.26	Integer32	read-write	This object is used to specify wfq group COS value.
U32 cmL3FlowPointWfqGroupEirLo	1.3.6.1.4.1.2544.1.12.37.1.33.1.27	Unsigned32	read-write	This object is used to specify wfq group EIR low 32 bits value.
U32 cmL3FlowPointWfqGroupEirHi	1.3.6.1.4.1.2544.1.12.37.1.33.1.28	Unsigned32	read-write	This object is used to specify wfq group EIR high 32 bits value.
SHA cmL3FlowPointEgressShapingType	1.3.6.1.4.1.2544.1.12.37.1.33.1.29	ShapingType	read-write	This object allows specification of Shaping Type for Flow Point
cmL3QosPolicerTable	1.3.6.1.4.1.2544.1.12.37.1.34		not-accessible	A list of entries corresponding to Ethernet Quality of Service Policer for configuration purposes.
cmL3QosPolicerEntry	1.3.6.1.4.1.2544.1.12.37.1.34.1		not-accessible	A conceptual row in the cmL3QosPolicerTable. These entries represent a Quality of Service Policer.
I32 cmL3QosPolicerIndex	1.3.6.1.4.1.2544.1.12.37.1.34.1.1	Integer32	read-create	The Policer Index that represents the COS level. This is applicable in case of a Multi COS flow. Index 1 represents COS 0; Index 2 represents COS 1 and so on. In release 5.6CC the range is extended to 1..16 to support duplicate N2A policers on a Flow. The duplicate policers are created under a Flow if network interface of the Flow is ERP Group or Split Horizon Group. In case of multi-cos Flow indices 1..8 represent policers of COS 0..7 going from Network 1 port; indices 9..16 represent policers for COS 0..7 going from Network 2 port. In case of single-cos Flow index 1 represents policer going from Network 1 port; index 9 represents policer going from Network 2 port.
ADM cmL3QosPolicerAdminState	1.3.6.1.4.1.2544.1.12.37.1.34.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Flow Policer.
OPE cmL3QosPolicerOperationalState	1.3.6.1.4.1.2544.1.12.37.1.34.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Flow Policer.
SEC cmL3QosPolicerSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.34.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Flow Policer.
U32 cmL3QosPolicerCIRLo	1.3.6.1.4.1.2544.1.12.37.1.34.1.5	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the lower 32 bits of the CIR.
U32 cmL3QosPolicerCIRHi	1.3.6.1.4.1.2544.1.12.37.1.34.1.6	Unsigned32	read-create	This object allows specification of the Commited Information Rate(CIR) on Policer. This represents the upper 32 bits of the CIR.
U32 cmL3QosPolicerEIRLo	1.3.6.1.4.1.2544.1.12.37.1.34.1.7	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the lower 32 bits of the EIR.
U32 cmL3QosPolicerEIRHi	1.3.6.1.4.1.2544.1.12.37.1.34.1.8	Unsigned32	read-create	This object allows specification of the Excess Information Rate(EIR) on the Policer. This represents the upper 32 bits of the EIR.
I32 cmL3QosPolicerCBS	1.3.6.1.4.1.2544.1.12.37.1.34.1.9	Integer32	read-create	This object allows specification of the Commited Burst Size (CBS) on Policer.
I32 cmL3QosPolicerEBS	1.3.6.1.4.1.2544.1.12.37.1.34.1.10	Integer32	read-create	This object allows specification of the Excess Burst Size (EBS) on the Policer.
POL cmL3QosPolicerAlgorithm	1.3.6.1.4.1.2544.1.12.37.1.34.1.11	PolicerAlgorithmType	read-only	This object allows specification of Policer algorithm as 'srTCM' (Single Rate Triple Color Marking) or 'trTCM' (Two Rate Triple Color Marking).
POL cmL3QosPolicerColorMode	1.3.6.1.4.1.2544.1.12.37.1.34.1.12	PolicerColorMode	read-create	This object allows specification of Policer Color Mode as 'color-aware' or 'color-blind'.
T/F cmL3QosPolicerCouplingFlag	1.3.6.1.4.1.2544.1.12.37.1.34.1.13	TruthValue	read-create	This object allows specification of Policer Coupling Flag. When coupling is enabled, tokens that would normally be added to the C-bucket are passed to the E-bucket only once the CIR bucket has reached its CBS level. Therefore under this condition the E-bucket is being filled at the rate of CIR + EIR. Normally the long term average of frames declared yellow is bounded by the EIR. Coupling is a function to allow the long term average of frames declared yellow to be bounded by CIR + EIR. This allows a higher volume of yellow frames to be delivered/received if the arrival of green marked frames is low. Tokens from the E-bucket do NOT get passed to the C-bucket once the EBS level has been reached. Enabling coupling in combination with a provisioned EIR of 0 allows for a single rate three color marking (srTCM) algorithm to be established. In this situation the E-bucket is filled at the CIR rate in the case the C-bucket is filled to its CBS level.
U32 cmL3QosPolicerCIRMaxHi	1.3.6.1.4.1.2544.1.12.37.1.34.1.14	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the high 32 bits.
U32 cmL3QosPolicerCIRMaxLo	1.3.6.1.4.1.2544.1.12.37.1.34.1.15	Unsigned32	read-write	This object allows specification of the Commited Information Rate(CIR) MAX on Policer. This represents the lower 32 bits.
U32 cmL3QosPolicerEIRMaxHi	1.3.6.1.4.1.2544.1.12.37.1.34.1.16	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the high 32 bits.
U32 cmL3QosPolicerEIRMaxLo	1.3.6.1.4.1.2544.1.12.37.1.34.1.17	Unsigned32	read-write	This object allows specification of the Excess Information Rate(EIR) MAX on the Policer. This represents the lower 32 bits.
NUM cmL3QosPolicerEnvelopeObject	1.3.6.1.4.1.2544.1.12.37.1.34.1.18	VariablePointer	read-write	This object allows specification of envelope object.
I32 cmL3QosPolicerRank	1.3.6.1.4.1.2544.1.12.37.1.34.1.19	Integer32	read-write	This object allows specification of rank value.
T/F cmL3QosPolicerPolicingEnabled	1.3.6.1.4.1.2544.1.12.37.1.34.1.20	TruthValue	read-write	This attribute allows enable or disable policers.
STO cmL3QosPolicerStorageType	1.3.6.1.4.1.2544.1.12.37.1.34.1.21	StorageType	read-create	The type of storage configured for this entry.
ROW cmL3QosPolicerRowStatus	1.3.6.1.4.1.2544.1.12.37.1.34.1.22	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmL3QosPolicerRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmL3QosPolicerRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmL3QosPolicerRowStatus object may be modified if the associated instance of this object is equal to active(1).
cmL3QosShaperTable	1.3.6.1.4.1.2544.1.12.37.1.35		not-accessible	A list of entries corresponding to Ethernet Access Port Quality of Service Shaper for configuration purposes. These shapers can be managed when the Access Port is in evpl mode and are relevant for traffic in the network to access direction.
cmL3QosShaperEntry	1.3.6.1.4.1.2544.1.12.37.1.35.1		not-accessible	A conceptual row in the cmL3QosShaperTable. These entries represent a Quality of Service Shaper.
I32 cmL3QosShaperIndex	1.3.6.1.4.1.2544.1.12.37.1.35.1.1	Integer32	read-create	The unique integer index value corresponding to a Quality of Service Shaper.
ADM cmL3QosShaperAdminState	1.3.6.1.4.1.2544.1.12.37.1.35.1.2	AdminState	read-write	This object represents the Administrative State of the QOS Shaper.
OPE cmL3QosShaperOperationalState	1.3.6.1.4.1.2544.1.12.37.1.35.1.3	OperationalState	read-only	This object represents the Operational State of the QOS Shaper.
SEC cmL3QosShaperSecondaryState	1.3.6.1.4.1.2544.1.12.37.1.35.1.4	SecondaryState	read-only	This object represents the Secondary State of the QOS Shaper.
U32 cmL3QosShaperCIRLo	1.3.6.1.4.1.2544.1.12.37.1.35.1.5	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Lower 32 bits)of a Shaper.
U32 cmL3QosShaperCIRHi	1.3.6.1.4.1.2544.1.12.37.1.35.1.6	Unsigned32	read-create	This object represents the Commited Information Rate(CIR) (Higher 32 bits) of a Shaper.
U32 cmL3QosShaperEIRLo	1.3.6.1.4.1.2544.1.12.37.1.35.1.7	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmL3QosShaperEIRHi	1.3.6.1.4.1.2544.1.12.37.1.35.1.8	Unsigned32	read-create	This object represents the Excess Information Rate(EIR) (Higher 32 bits) on the Shaper.
U32 cmL3QosShaperBufferSize	1.3.6.1.4.1.2544.1.12.37.1.35.1.9	Unsigned32	read-create	This object represents the Buffer Size of the Shaper.
I32 cmL3QosShaperCOS	1.3.6.1.4.1.2544.1.12.37.1.35.1.10	Integer32	read-only	This object provides the COS (Class of Service) value for the QOS Shaper.
STO cmL3QosShaperStorageType	1.3.6.1.4.1.2544.1.12.37.1.35.1.11	StorageType	read-create	The type of storage configured for this entry.
ROW cmL3QosShaperRowStatus	1.3.6.1.4.1.2544.1.12.37.1.35.1.12	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmL3QosShaperRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmL3QosShaperRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmL3QosShaperRowStatus object may be modified if the associated instance of this object is equal to active(1).
I32 cmL3QosShaperWfqWeight	1.3.6.1.4.1.2544.1.12.37.1.35.1.13	Integer32	read-write	This object represents the wfq weight of the QoS Shaper.
f3L3TrafficOspfInterfaceTable	1.3.6.1.4.1.2544.1.12.37.1.36		not-accessible	A list of entries for the Traffic OSPF Interface.
f3L3TrafficOspfInterfaceEntry	1.3.6.1.4.1.2544.1.12.37.1.36.1		not-accessible	A conceptual row in the f3L3TrafficOspfInterfaceTable.
I32 f3L3TrafficOspfInterfaceIndex	1.3.6.1.4.1.2544.1.12.37.1.36.1.1	Integer32	not-accessible	The index of the Traffic OSPF Interface entry.
U32 f3L3TrafficOspfInterfaceOspfCost	1.3.6.1.4.1.2544.1.12.37.1.36.1.2	Unsigned32	read-write	The cost of the route during the SPF calculation.
OSP f3L3TrafficOspfInterfaceType	1.3.6.1.4.1.2544.1.12.37.1.36.1.3	OspfIfType	read-write	Interface network type.
I32 f3L3TrafficOspfInterfaceOspfRtrPriority	1.3.6.1.4.1.2544.1.12.37.1.36.1.4	Integer32	read-write	An 8-bit unsigned integer, used for DR and BDR election, may be default. 0 means not to attend DR election.
I32 f3L3TrafficOspfInterfaceOspfHelloInterval	1.3.6.1.4.1.2544.1.12.37.1.36.1.5	Integer32	read-write	The interval in seconds between Hello Packets that the router sends on the interface.
I32 f3L3TrafficOspfInterfaceOspfDeadInterval	1.3.6.1.4.1.2544.1.12.37.1.36.1.6	Integer32	read-write	The number of seconds before the router's neighbors will declare it down, when they stop hearing the router's Hello Packets.
I32 f3L3TrafficOspfInterfaceOspfTransmitDelay	1.3.6.1.4.1.2544.1.12.37.1.36.1.7	Integer32	read-write	The estimated number of seconds it takes to transmit a Link State Update Packet over this interface. LSAs contained in the Link State update packet will have their age incremented by this amount before transmission. This value should take into account transmission and propagation delays; it must be greater than zero.
I32 f3L3TrafficOspfInterfaceOspfRetransmitInterval	1.3.6.1.4.1.2544.1.12.37.1.36.1.8	Integer32	read-write	The number of seconds between LSA retransmissions, for adjacencies belonging to this interface. Also used when retransmitting Database Description and Link State Request Packets.
NUM f3L3TrafficOspfInterfaceState	1.3.6.1.4.1.2544.1.12.37.1.36.1.9	OspfInterfaceState	read-only	The State of Interface in running OSPF protocol.
IP f3L3TrafficOspfInterfaceOspfDesignatedRouterId	1.3.6.1.4.1.2544.1.12.37.1.36.1.10	IpAddress	read-only	Designated Router IP interface on the Network.
IP f3L3TrafficOspfInterfaceOspfBackupDesignatedRouterId	1.3.6.1.4.1.2544.1.12.37.1.36.1.11	IpAddress	read-only	Backup Designated Router IP interface on the Network.
OSP f3L3TrafficOspfInterfaceOspfAuthType	1.3.6.1.4.1.2544.1.12.37.1.36.1.12	OspfAuthType	read-write	This attribute is used to specify authentication type. Simple: 64-bits clear password inserted into ospf packets header. None: No authentication is used. Cryptographic: a shared secret which enables the generation/verification of message digests which are appended to the OSPF protocol packets. IPsec: use IP layer's IPSec to support authentication, rather than OSPF header..
STR f3L3TrafficOspfInterfaceOspfSimpleAuthKey	1.3.6.1.4.1.2544.1.12.37.1.36.1.13	DisplayString	read-write	Simple Authentication type authentication key (8 Bytes length).
NUM f3L3TrafficOspfInterfaceOspfCryptoKeyId	1.3.6.1.4.1.2544.1.12.37.1.36.1.14	VariablePointer	read-write	Key id from the keys configured in the Authentication keys table. This key is used if Authentication Type is cryptographic.
U32 f3L3TrafficOspfInterfaceOspfInstanceId	1.3.6.1.4.1.2544.1.12.37.1.36.1.15	Unsigned32	read-write	OSPFv3 Instance ID. Instance ID allows multiple OSPF protocol instances to be run on a single link. Default value is 0. It is only necessary to assign a value other than 0 on those links that will contain multiple separate communities of OSPF routers. Only Applicable to ospfv3.
U32 f3L3TrafficOspfInterfaceId	1.3.6.1.4.1.2544.1.12.37.1.36.1.16	Unsigned32	read-write	32-bit number uniquely identifying this interface among the collection of this router's interfaces. Shall be unique per router. Default vlaue shall be the last number of EID. Only applicable to OSPFv3.
T/F f3L3TrafficOspfInterfaceLinkLsaSuppression	1.3.6.1.4.1.2544.1.12.37.1.36.1.17	TruthValue	read-write	Indicates whether or not origination of a link-LSA is suppressed. In OSPFv3, link LSAs are generated for each link, announcing link-local IPv6 address of the router to its local neighbors. These are useless on PtP or PtMP networks and this option allows to suppress the link LSA origination for such interfaces. The attribute is ignored on other than PtP or PtMP interfaces. Default value is disbaled. Only applicable to OSPFv3.
T/F f3L3TrafficOspfInterfacePassiveControl	1.3.6.1.4.1.2544.1.12.37.1.36.1.18	TruthValue	read-write	Enable/Disable passive interface - a passive interface's prefix will be advertised but no neighbor adjacencies will be formed on the interface..
STR f3L3TrafficOspfInterfaceAssociatedIpInterface	1.3.6.1.4.1.2544.1.12.37.1.36.1.19	DisplayString	read-create	The reference of Traffic IP Interface or loopback interface. It is the name of interface.
STO f3L3TrafficOspfInterfaceStorageType	1.3.6.1.4.1.2544.1.12.37.1.36.1.20	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficOspfInterfaceRowStatus	1.3.6.1.4.1.2544.1.12.37.1.36.1.21	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficOspfInterfaceRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficOspfInterfaceRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficOspfInterfaceRowStatus object may be modified if the associated instance of this object is equal to active(1).
T/F f3L3TrafficOspfInterfaceTilfaControl	1.3.6.1.4.1.2544.1.12.37.1.36.1.22	TruthValue	read-create	TI-LFA Control.
TIL f3L3TrafficOspfInterfaceTilfaProtectionType	1.3.6.1.4.1.2544.1.12.37.1.36.1.23	TilfaProtectionType	read-create	TI-LFA Protection Type.
f3L3TrafficBgpPeerAddressFamilyTable	1.3.6.1.4.1.2544.1.12.37.1.37		not-accessible	A list of entries for the Traffic BGP Peer Address Family.
f3L3TrafficBgpPeerAddressFamilyEntry	1.3.6.1.4.1.2544.1.12.37.1.37.1		not-accessible	A conceptual row in the f3L3TrafficBgpPeerAddressFamilyTable.
I32 f3L3TrafficBgpPeerAddressFamilyIndex	1.3.6.1.4.1.2544.1.12.37.1.37.1.1	Integer32	not-accessible	The index of the Traffic BGP Peer Address Family entry.
ADR f3L3TrafficBgpPeerAddressFamilyName	1.3.6.1.4.1.2544.1.12.37.1.37.1.2	BgpPeerAddressFamilyNameType	read-create	Address Family Name.
T/F f3L3TrafficBgpPeerAddressFamilyRedistOspfRoute	1.3.6.1.4.1.2544.1.12.37.1.37.1.3	TruthValue	read-write	If set to true, redistribute the connected route to the neighbour.
T/F f3L3TrafficBgpPeerAddressFamilyRedistConnectedRoute	1.3.6.1.4.1.2544.1.12.37.1.37.1.4	TruthValue	read-write	If set to true, redistribute the connected route to the neighbour.
T/F f3L3TrafficBgpPeerAddressFamilyRedistStaticRoute	1.3.6.1.4.1.2544.1.12.37.1.37.1.5	TruthValue	read-write	If set to true, redistribute the static route to the neighbour.
T/F f3L3TrafficBgpPeerAddressFamilyRedistDhcpRoute	1.3.6.1.4.1.2544.1.12.37.1.37.1.6	TruthValue	read-write	If set to true, redistribute the dhcproute to the neighbour.
T/F f3L3TrafficBgpPeerAddressFamilyRedistSlaacRoute	1.3.6.1.4.1.2544.1.12.37.1.37.1.7	TruthValue	read-write	If set to true, redistribute the default route to the neighbour. This attribute is only applicable to IPv6 address family.
T/F f3L3TrafficBgpPeerAddressFamilySendDefaultRoute	1.3.6.1.4.1.2544.1.12.37.1.37.1.8	TruthValue	read-write	If set to true, send the default route to the neighbour.
BGP f3L3TrafficBgpPeerAddressFamilyNextHopType	1.3.6.1.4.1.2544.1.12.37.1.37.1.9	BgpNextHopUpdateType	read-write	The mechanism to update NEXT HOP attribute in update message: 1. DEFAULT: Update next hop according the rules in RFC4271 2. SELF: Use transmitting interface's as the next hop 3. IPv4 Address: Configure IPv4 address as next hop explicitly 4. IPv6 Address: Configure IPv6 address as next hop explicitly
IP f3L3TrafficBgpPeerAddressFamilyNextHopIpv4	1.3.6.1.4.1.2544.1.12.37.1.37.1.10	IpAddress	read-write	The IPv4 address used to override NEXT HOP attribute.
ADR f3L3TrafficBgpPeerAddressFamilyNextHopIpv6	1.3.6.1.4.1.2544.1.12.37.1.37.1.11	Ipv6Address	read-write	The IPv4 address used to override NEXT HOP attribute.
T/F f3L3TrafficBgpPeerAddressFamilyExtNextHopControl	1.3.6.1.4.1.2544.1.12.37.1.37.1.12	TruthValue	read-write	Whether to support Extended Next Hop Encoding Capability. E.g Allowing advertising IPV4 route with a Next Hop address of IPv6..
STO f3L3TrafficBgpPeerAddressFamilyStorageType	1.3.6.1.4.1.2544.1.12.37.1.37.1.13	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficBgpPeerAddressFamilyRowStatus	1.3.6.1.4.1.2544.1.12.37.1.37.1.14	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpPeerAddressFamilyRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpPeerAddressFamilyRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpPeerAddressFamilyRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficBgpRIBRouteTable	1.3.6.1.4.1.2544.1.12.37.1.38		not-accessible	A list of entries for the Traffic BGP RIB routes.
f3L3TrafficBgpRIBRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.38.1		not-accessible	A conceptual row in the f3L3TrafficBgpRouteTable.
I32 f3L3TrafficBgpRIBRouteIndex	1.3.6.1.4.1.2544.1.12.37.1.38.1.1	Integer32	not-accessible	The index of the Traffic BGP RIB Route entry.
STR f3L3TrafficBgpRIBRouteNetwork	1.3.6.1.4.1.2544.1.12.37.1.38.1.2	DisplayString	read-only	Traffic BGP RIB Route's destination network address.
STR f3L3TrafficBgpRIBRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.38.1.3	DisplayString	read-only	Traffic BGP RIB Route's next hop interface address.
I32 f3L3TrafficBgpRIBRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.38.1.4	Integer32	read-only	List of AS numbers in the path to route's destination network
STR f3L3TrafficBgpRIBRoutePath	1.3.6.1.4.1.2544.1.12.37.1.38.1.5	DisplayString	read-only	The index of the Traffic BGP RIB Route entry.
f3L3TrafficBgpInRouteTable	1.3.6.1.4.1.2544.1.12.37.1.39		not-accessible	BGP In routes. Must set f3L3TrafficBgpRouterAction as optimizeBgpInRouteRetrieve(2) before get data from this table.
f3L3TrafficBgpInRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.39.1		not-accessible	A conceptual row in the f3L3TrafficBgpInRouteTable. Entries can be created/deleted in this table by management application action.
U32 f3L3TrafficBgpInRouteIndex	1.3.6.1.4.1.2544.1.12.37.1.39.1.1	Unsigned32	not-accessible	Index of this route. Key of the table.
STR f3L3TrafficBgpInRouteNetwork	1.3.6.1.4.1.2544.1.12.37.1.39.1.2	DisplayString	read-only	Network of destination.
STR f3L3TrafficBgpInRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.39.1.3	DisplayString	read-only	Address of next hop.
U32 f3L3TrafficBgpInRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.39.1.4	Unsigned32	read-only	Metric value of this route.
STR f3L3TrafficBgpInRoutePath	1.3.6.1.4.1.2544.1.12.37.1.39.1.5	DisplayString	read-only	The list of AS numbers to the destination.
U32 f3L3TrafficBgpInRouteLocalPreference	1.3.6.1.4.1.2544.1.12.37.1.39.1.6	Unsigned32	read-only	Local Preference Value received from iBGP.
f3L3TrafficBgpRouteV2Table	1.3.6.1.4.1.2544.1.12.37.1.40		not-accessible	BGP routes. Must set f3L3TrafficBgpRouterAction as optimizeBgpRouteRetrieve(1) before get data from this table.
f3L3TrafficBgpRouteV2Entry	1.3.6.1.4.1.2544.1.12.37.1.40.1		not-accessible	A conceptual row in the f3L3TrafficBgpRouteV2Table. Entries can be created/deleted in this table by management application action.
U32 f3L3TrafficBgpRouteV2Index	1.3.6.1.4.1.2544.1.12.37.1.40.1.1	Unsigned32	not-accessible	Index of this route. Key of the table.
STR f3L3TrafficBgpRouteV2Network	1.3.6.1.4.1.2544.1.12.37.1.40.1.2	DisplayString	read-only	Network of destination.
STR f3L3TrafficBgpRouteV2NextHop	1.3.6.1.4.1.2544.1.12.37.1.40.1.3	DisplayString	read-only	Address of next hop.
U32 f3L3TrafficBgpRouteV2Metric	1.3.6.1.4.1.2544.1.12.37.1.40.1.4	Unsigned32	read-only	Metric value of this route.
STR f3L3TrafficBgpRouteV2Path	1.3.6.1.4.1.2544.1.12.37.1.40.1.5	DisplayString	read-only	The list of AS numbers to the destination.
U32 f3L3TrafficBgpRouteV2LocalPreference	1.3.6.1.4.1.2544.1.12.37.1.40.1.6	Unsigned32	read-only	Local Preference Value received from iBGP.
f3L3TrafficBgpPeerAddressFamilyAdvPrefixTable	1.3.6.1.4.1.2544.1.12.37.1.41		not-accessible	Advertising Prefix of BGP Peer Address Family.
f3L3TrafficBgpPeerAddressFamilyAdvPrefixEntry	1.3.6.1.4.1.2544.1.12.37.1.41.1		not-accessible	A conceptual row in the f3L3TrafficBgpPeerAddressFamilyAdvPrefixTable. Entries can be created/deleted in this table by management application action.
STR f3L3TrafficBgpPeerAddressFamilyAdvPrefix	1.3.6.1.4.1.2544.1.12.37.1.41.1.1	DisplayString	not-accessible	Advertising Prefix of a BGP Peer Address Family. Key of the table.
STO f3L3TrafficBgpPeerAddressFamilyAdvPrefixStorageType	1.3.6.1.4.1.2544.1.12.37.1.41.1.2	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus	1.3.6.1.4.1.2544.1.12.37.1.41.1.3	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficBgpPeerAddressFamilyAdvPrefixRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficOspfV3NeighborTable	1.3.6.1.4.1.2544.1.12.37.1.42		not-accessible	OSPF v3 neighbor table. Must set f3VrfOspfRouterAction as optimizeOspfNeighborRetrieve(3) before get data from this table.
f3L3TrafficOspfV3NeighborEntry	1.3.6.1.4.1.2544.1.12.37.1.42.1		not-accessible	A conceptual row in the f3L3TrafficOspfV3NeighborTable. Entries can be created/deleted in this table by management application action.
IP f3L3TrafficOspfV3NeighborRouterId	1.3.6.1.4.1.2544.1.12.37.1.42.1.1	IpAddress	read-only	Router ID of the neighbor.
U32 f3L3TrafficOspfV3NeighborInterfaceId	1.3.6.1.4.1.2544.1.12.37.1.42.1.2	Unsigned32	read-only	ID of the interface of neighbor.
U32 f3L3TrafficOspfV3NeighborPriority	1.3.6.1.4.1.2544.1.12.37.1.42.1.3	Unsigned32	read-only	The priority of the neighbor.
U32 f3L3TrafficOspfV3NeighborDeadTime	1.3.6.1.4.1.2544.1.12.37.1.42.1.4	Unsigned32	read-only	The Dead Time field indicates the amount of time remaining that the router waits to receive an OSPF hello packet from the neighbor before declaring the neighbor down.
STR f3L3TrafficOspfV3NeighborLocalInterfaceName	1.3.6.1.4.1.2544.1.12.37.1.42.1.5	DisplayString	read-only	The name of local interface which discovers the neighbor.
OSP f3L3TrafficOspfV3NeighborState	1.3.6.1.4.1.2544.1.12.37.1.42.1.6	OspfAdjacencyState	read-only	State of Link State Database synchronization with the neighbor.
TRA f3L3TrafficOspfV3NeighborRole	1.3.6.1.4.1.2544.1.12.37.1.42.1.7	TrafficOspfRole	read-only	Role of the neighbor. DR, DR other and Backup are applicable.
STR f3L3TrafficOspfV3NeighborIpAddress	1.3.6.1.4.1.2544.1.12.37.1.42.1.8	DisplayString	read-only	Link-local Address of interface of neighbor.
f3L3TrafficOspfLinkLsDbTable	1.3.6.1.4.1.2544.1.12.37.1.43		not-accessible	OSPF Link State database. Must set f3VrfOspfRouterAction as optimizeOspfLinkLinkLsDbRetrieve(4) before get data from this table.
f3L3TrafficOspfLinkLsDbEntry	1.3.6.1.4.1.2544.1.12.37.1.43.1		not-accessible	A conceptual row in the f3L3TrafficOspfLinkLsDbTable. Entries can be created/deleted in this table by management application action.
OSP f3L3TrafficOspfLinkLsDbType	1.3.6.1.4.1.2544.1.12.37.1.43.1.1	OspfLsaType	not-accessible	LSA Type.
IP f3L3TrafficOspfLinkLsDbId	1.3.6.1.4.1.2544.1.12.37.1.43.1.2	IpAddress	not-accessible	Link State ID.
IP f3L3TrafficOspfLinkLsDbAdvRouterId	1.3.6.1.4.1.2544.1.12.37.1.43.1.3	IpAddress	not-accessible	Advertising Router ID.
U32 f3L3TrafficOspfLinkLsDbInterfaceId	1.3.6.1.4.1.2544.1.12.37.1.43.1.4	Unsigned32	not-accessible	The interface id of the interface instance from which the LSA was received.
STR f3L3TrafficOspfLinkLsDbInterface	1.3.6.1.4.1.2544.1.12.37.1.43.1.5	DisplayString	not-accessible	The local interface name from which the LSA was received.
IP f3L3TrafficOspfLinkLsDbAreaId	1.3.6.1.4.1.2544.1.12.37.1.43.1.6	IpAddress	read-only	Area ID.
U32 f3L3TrafficOspfLinkLsDbChecksum	1.3.6.1.4.1.2544.1.12.37.1.43.1.7	Unsigned32	read-only	The checksum associated with Link State Advertisement.
U32 f3L3TrafficOspfLinkLsDbSeqNum	1.3.6.1.4.1.2544.1.12.37.1.43.1.8	Unsigned32	read-only	The Sequence Number associated with the last LSA.
U32 f3L3TrafficOspfLinkLsDbAge	1.3.6.1.4.1.2544.1.12.37.1.43.1.9	Unsigned32	read-only	The age, in seconds, since this LSA was last received.
U32 f3L3TrafficOspfLinkLsDbRtrPriority	1.3.6.1.4.1.2544.1.12.37.1.43.1.10	Unsigned32	read-only	Router priority for the interface.
STR f3L3TrafficOspfLinkLsDbLinkLocalAddress	1.3.6.1.4.1.2544.1.12.37.1.43.1.11	DisplayString	read-only	The originating router's linklocal interface address for the link.
STR f3L3TrafficOspfLinkLsDbPrefixList	1.3.6.1.4.1.2544.1.12.37.1.43.1.12	DisplayString	read-only	List of Prefixes associated with the link. In maximum, up to 16 prefixes are supported.
f3L3TrafficIpv4StaticRouteTable	1.3.6.1.4.1.2544.1.12.37.1.44		not-accessible	A list of entries for the L3 Traffic Ipv4 Static route.
f3L3TrafficIpv4StaticRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.44.1		not-accessible	A conceptual row in the f3L3TrafficIpv4StaticRouteTable.
IP f3L3TrafficIpv4StaticRouteDest	1.3.6.1.4.1.2544.1.12.37.1.44.1.1	IpAddress	not-accessible	It specifies the traffic Ipv4 Static route destination.
IP f3L3TrafficIpv4StaticRouteMask	1.3.6.1.4.1.2544.1.12.37.1.44.1.2	IpAddress	not-accessible	It specifies the traffic Ipv4 Static route mask.
STR f3L3TrafficIpv4StaticRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.44.1.3	DisplayString	not-accessible	It specifies the traffic Ipv4 Static route next hop.
STR f3L3TrafficIpv4StaticRouteInterface	1.3.6.1.4.1.2544.1.12.37.1.44.1.4	DisplayString	not-accessible	It specifies the traffic Ipv4 Static route interface.
I32 f3L3TrafficIpv4StaticRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.44.1.5	Integer32	read-write	It specifies the traffic Ipv4 Static route metric.
T/F f3L3TrafficIpv4StaticRouteSourceForwardingEnable	1.3.6.1.4.1.2544.1.12.37.1.44.1.6	TruthValue	read-write	It specifies the traffic Ipv4 static route source forwarding whether enabled.
STO f3L3TrafficIpv4StaticRouteStorageType	1.3.6.1.4.1.2544.1.12.37.1.44.1.7	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficIpv4StaticRouteRowStatus	1.3.6.1.4.1.2544.1.12.37.1.44.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv4StaticRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv4StaticRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv4StaticRouteRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIpv4AllRouteTable	1.3.6.1.4.1.2544.1.12.37.1.45		not-accessible	A list of entries for the L3 Traffic Ipv4 route. Must set f3VrfActionX as optimizeRouteRetrieve(3) before get data from this table.
f3L3TrafficIpv4AllRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.45.1		not-accessible	A conceptual row in the f3L3TrafficIpv4AllRouteTable.
IP f3L3TrafficIpv4AllRouteDest	1.3.6.1.4.1.2544.1.12.37.1.45.1.1	IpAddress	not-accessible	It specifies the traffic Ipv4 route destination.
IP f3L3TrafficIpv4AllRouteMask	1.3.6.1.4.1.2544.1.12.37.1.45.1.2	IpAddress	not-accessible	It specifies the traffic Ipv4 route mask.
STR f3L3TrafficIpv4AllRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.45.1.3	DisplayString	not-accessible	It specifies the traffic Ipv4 route next hop.
STR f3L3TrafficIpv4AllRouteInterface	1.3.6.1.4.1.2544.1.12.37.1.45.1.4	DisplayString	not-accessible	It specifies the traffic Ipv4 route interface.
NUM f3L3TrafficIpv4AllRouteOrigin	1.3.6.1.4.1.2544.1.12.37.1.45.1.5	TrafficIpRouteOriginType	not-accessible	The origin of IP Route.
I32 f3L3TrafficIpv4AllRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.45.1.6	Integer32	read-write	It specifies the traffic Ipv4 route metric.
T/F f3L3TrafficIpv4AllRouteSourceForwardingEnable	1.3.6.1.4.1.2544.1.12.37.1.45.1.7	TruthValue	read-write	It specifies the traffic Ipv4 route source forwarding whether enabled.
U32 f3L3TrafficIpv4AllRouteAdminDistance	1.3.6.1.4.1.2544.1.12.37.1.45.1.8	Unsigned32	read-only	The Administrative Distance of IP Route.
TRA f3L3TrafficIpv4AllRouteStatus	1.3.6.1.4.1.2544.1.12.37.1.45.1.9	TrafficIpRouteStatusType	read-only	It specifies the traffic Ipv4 route status.
STO f3L3TrafficIpv4AllRouteStorageType	1.3.6.1.4.1.2544.1.12.37.1.45.1.10	StorageType	read-create	The type of storage configured for this entry.
ROW f3L3TrafficIpv4AllRouteRowStatus	1.3.6.1.4.1.2544.1.12.37.1.45.1.11	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv4AllRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv4AllRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv4AllRouteRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIpv6StaticRouteTable	1.3.6.1.4.1.2544.1.12.37.1.46		not-accessible	A list of entries for the L3 Traffic Ipv6 static route.
f3L3TrafficIpv6StaticRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.46.1		not-accessible	A conceptual row in the f3L3TrafficIpv6StaticRouteTable.
ADR f3L3TrafficIpv6StaticRouteDest	1.3.6.1.4.1.2544.1.12.37.1.46.1.1	Ipv6Address	not-accessible	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the static-route-mask attribute is not equal to x.
I32 f3L3TrafficIpv6StaticRoutePrefixLength	1.3.6.1.4.1.2544.1.12.37.1.46.1.2	Integer32	not-accessible	Indicate the mask to be logically ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the static route mask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical AND of x with the value of the corresponding instance of the static-route-dest attribute is not equal to static route destination.
STR f3L3TrafficIpv6StaticRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.46.1.3	DisplayString	not-accessible	The address of the next router en route.
STR f3L3TrafficIpv6StaticRouteInterface	1.3.6.1.4.1.2544.1.12.37.1.46.1.4	DisplayString	not-accessible	Name of the IP interface for the interface static route.
I32 f3L3TrafficIpv6StaticRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.46.1.5	Integer32	read-write	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1.
STO f3L3TrafficIpv6StaticRouteStorageType	1.3.6.1.4.1.2544.1.12.37.1.46.1.6	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIpv6StaticRouteRowStatus	1.3.6.1.4.1.2544.1.12.37.1.46.1.7	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv6StaticRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv6StaticRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv6StaticRouteRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIpv6AllRouteTable	1.3.6.1.4.1.2544.1.12.37.1.47		not-accessible	A list of entries for the L3 Traffic Ipv6 route. Must set f3VrfActionX as optimizeIpv6RouteRetrieve(7) before get data from this table.
f3L3TrafficIpv6AllRouteEntry	1.3.6.1.4.1.2544.1.12.37.1.47.1		not-accessible	A conceptual row in the f3L3TrafficIpv6AllRouteTable.
ADR f3L3TrafficIpv6AllRouteDest	1.3.6.1.4.1.2544.1.12.37.1.47.1.1	Ipv6Address	not-accessible	The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the static-route-mask attribute is not equal to x.
I32 f3L3TrafficIpv6AllRoutePrefixLength	1.3.6.1.4.1.2544.1.12.37.1.47.1.2	Integer32	not-accessible	Indicate the mask to be logically ANDed with the destination address before being compared to the value in the cmStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the static route mask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical AND of x with the value of the corresponding instance of the static-route-dest attribute is not equal to static route destination.
STR f3L3TrafficIpv6AllRouteNextHop	1.3.6.1.4.1.2544.1.12.37.1.47.1.3	DisplayString	not-accessible	The address of the next router en route.
STR f3L3TrafficIpv6AllRouteInterface	1.3.6.1.4.1.2544.1.12.37.1.47.1.4	DisplayString	not-accessible	Name of the IP interface for the interface static route.
NUM f3L3TrafficIpv6AllRouteOrigin	1.3.6.1.4.1.2544.1.12.37.1.47.1.5	TrafficIpRouteOriginType	not-accessible	The origin of IP Route.
I32 f3L3TrafficIpv6AllRouteMetric	1.3.6.1.4.1.2544.1.12.37.1.47.1.6	Integer32	read-write	The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's cmStaticRouteProto value. If this metric is not used, its value should be set to 1.
U32 f3L3TrafficIpv6AllRouteAdminDistance	1.3.6.1.4.1.2544.1.12.37.1.47.1.7	Unsigned32	read-only	The Administrative Distance of IP Route.
TRA f3L3TrafficIpv6AllRouteStatus	1.3.6.1.4.1.2544.1.12.37.1.47.1.8	TrafficIpRouteStatus	read-only	It specifies the traffic Ipv6 route status.
STO f3L3TrafficIpv6AllRouteStorageType	1.3.6.1.4.1.2544.1.12.37.1.47.1.9	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIpv6AllRouteRowStatus	1.3.6.1.4.1.2544.1.12.37.1.47.1.10	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIpv6AllRouteRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIpv6AllRouteRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIpv6AllRouteRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3IpPrefixListTable	1.3.6.1.4.1.2544.1.12.37.1.48		not-accessible	IP Prefix List table.
f3IpPrefixListEntry	1.3.6.1.4.1.2544.1.12.37.1.48.1		not-accessible	A conceptual row in the f3IpPrefixListTable. Entries can be created/deleted in this table by management application action.
I32 f3IpPrefixListIndex	1.3.6.1.4.1.2544.1.12.37.1.48.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IP Prefix List within a VRF.
STR f3IpPrefixListName	1.3.6.1.4.1.2544.1.12.37.1.48.1.2	DisplayString	read-create	The name of IP Prefix List.
IPP f3IpPrefixListDefaultDisposition	1.3.6.1.4.1.2544.1.12.37.1.48.1.3	IpPrefixDispositionType	read-write	This indicates the default disposition for the prefix that does not match any prefix in the prefix list..
STO f3IpPrefixListStorageType	1.3.6.1.4.1.2544.1.12.37.1.48.1.4	StorageType	read-create	The storage type for this conceptual row.
ROW f3IpPrefixListRowStatus	1.3.6.1.4.1.2544.1.12.37.1.48.1.5	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3IpPrefixListRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3IpPrefixListRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3IpPrefixListRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3IpPrefixTable	1.3.6.1.4.1.2544.1.12.37.1.49		not-accessible	IP Prefix table.
f3IpPrefixEntry	1.3.6.1.4.1.2544.1.12.37.1.49.1		not-accessible	A conceptual row in the f3IpPrefixTable. Entries can be created/deleted in this table by management application action.
I32 f3IpPrefixIndex	1.3.6.1.4.1.2544.1.12.37.1.49.1.1	Integer32	not-accessible	An integer index value used to uniquely identify this IP Prefix entry within a IP Prefix List.
STR f3IpPrefix	1.3.6.1.4.1.2544.1.12.37.1.49.1.2	DisplayString	read-create	The IP Prefix. The length is up to 64 characters.
U32 f3IpPrefixPriority	1.3.6.1.4.1.2544.1.12.37.1.49.1.3	Unsigned32	read-write	This dictates the order in which this entry is applied relative to the IP Prefix List. These values need not be sequential and can have gaps. The priority of the IP Prefix Entry within a list shall be unique. Higher the value lower the priority.
IPP f3IpPrefixDisposition	1.3.6.1.4.1.2544.1.12.37.1.49.1.4	IpPrefixDispositionType	read-write	This indicates whether to permit or deny the prefix.
I32 f3IpPrefixLessOrEqualPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.49.1.5	Integer32	read-write	This allows specifying a prefix length which allows filtering networks with more specific prefixes within this Prefix attribute. For example, if this value is 16 and the Prefix attribute is , then all the networks in 10.0.0.0/8 that have prefix that is 16 or less will be filtered. A specific value of Prefix 0.0.0.0/0 with a value of 32 for this attribute implies all the networks and it could be used for the rule with highest priority value (lowest priority) that permits all networks that have not been filtered by higher priority entries.
I32 f3IpPrefixGreaterOrEqualPrefixLen	1.3.6.1.4.1.2544.1.12.37.1.49.1.6	Integer32	read-write	This allows specifying a prefix length which allows filtering all networks in the specified Prefix that are at least the length specified for this attribute. This attribute value shall be greater than the Prefix Length of the Prefix attribute. For example, if this value is 16 and the Prefix attribute is , then all the networks in 10.0.0.0/8 with a prefix greater than or equal to 16 are filtered.
STO f3IpPrefixStorageType	1.3.6.1.4.1.2544.1.12.37.1.49.1.7	StorageType	read-create	The storage type for this conceptual row.
ROW f3IpPrefixRowStatus	1.3.6.1.4.1.2544.1.12.37.1.49.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3IpPrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3IpPrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3IpPrefixRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIPInterfaceRAPrefixTable	1.3.6.1.4.1.2544.1.12.37.1.50		not-accessible	Traffic IP interface RAP prefix table.
f3L3TrafficIPInterfaceRAPrefixEntry	1.3.6.1.4.1.2544.1.12.37.1.50.1		not-accessible	A conceptual row in f3L3TrafficIPInterfaceRAPrefixTable.
I32 f3L3TrafficIPInterfaceRAPrefixIndex	1.3.6.1.4.1.2544.1.12.37.1.50.1.1	Integer32	not-accessible	The unique integer index value corresponding to a traffic IP interface RA prefix.
T/F f3L3TrafficIPInterfaceRAPrefixAdvertiseEnabled	1.3.6.1.4.1.2544.1.12.37.1.50.1.2	TruthValue	read-write	This attribute is to enable to Advertise prefix to link in router mode.
ADR f3L3TrafficIPInterfaceRAPrefix	1.3.6.1.4.1.2544.1.12.37.1.50.1.3	Ipv6Address	read-write	This is the IPv6 Prefix to be dispatched to the link in Router mode.
I32 f3L3TrafficIPInterfaceRAPrefixLength	1.3.6.1.4.1.2544.1.12.37.1.50.1.4	Integer32	read-write	Prefix length.
U32 f3L3TrafficIPInterfaceRAPrefixValidLifeTime	1.3.6.1.4.1.2544.1.12.37.1.50.1.5	Unsigned32	read-write	This attribute is used to specify fixed Valid lifetime of distributed prefix in seconds All ones may be set for unlimited lifetime.
U32 f3L3TrafficIPInterfaceRAPrefixPreferredLifeTime	1.3.6.1.4.1.2544.1.12.37.1.50.1.6	Unsigned32	read-write	This attribute is used to specify fixed time interval for unrestricted use of prefix. When this time has been expired the address is considered as deprecated as specified in RFC4862 Preferred lifetime shall not be greater than the Valid Lifetime. All ones may be set for unlimited lifetime.
STO f3L3TrafficIPInterfaceRAPrefixStorageType	1.3.6.1.4.1.2544.1.12.37.1.50.1.7	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPInterfaceRAPrefixRowStatus	1.3.6.1.4.1.2544.1.12.37.1.50.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPInterfaceRAPrefixRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPInterfaceRAPrefixRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPInterfaceRAPrefixRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIPInterfaceNdpTable	1.3.6.1.4.1.2544.1.12.37.1.51		not-accessible	Traffic IPv6 NDP table. Must set f3L3TrafficIPIfActionX as optimizeNdpRetrieve(2) before get data from this table.
f3L3TrafficIPInterfaceNdpEntry	1.3.6.1.4.1.2544.1.12.37.1.51.1		not-accessible	A conceptual row in f3L3TrafficIPInterfaceNdpTable.
ADR f3L3TrafficIPInterfaceNdpIPv6Addr	1.3.6.1.4.1.2544.1.12.37.1.51.1.1	Ipv6Address	not-accessible	This is the IP address of the NDP Entry.
STR f3L3TrafficIPInterfaceNdpInterface	1.3.6.1.4.1.2544.1.12.37.1.51.1.2	DisplayString	read-create	This is the IP interface for the NDP Entry.
MAC f3L3TrafficIPInterfaceNdpMacAddress	1.3.6.1.4.1.2544.1.12.37.1.51.1.3	MacAddress	read-create	This is the MAC address of the NDP Entry.
IPE f3L3TrafficIPInterfaceNdpType	1.3.6.1.4.1.2544.1.12.37.1.51.1.4	IpEntryType	read-create	The type of NDP Entry. Note that static entries can be created.
NDP f3L3TrafficIPInterfaceNdpReachabilityState	1.3.6.1.4.1.2544.1.12.37.1.51.1.5	NdpNeighborReachabilityState	read-only	This is the reachability state of the NDP Entry.
I32 f3L3TrafficIPInterfaceNdpAge	1.3.6.1.4.1.2544.1.12.37.1.51.1.6	Integer32	read-only	Indicates entry age in seconds.
STO f3L3TrafficIPInterfaceNdpStorageType	1.3.6.1.4.1.2544.1.12.37.1.51.1.7	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPInterfaceNdpRowStatus	1.3.6.1.4.1.2544.1.12.37.1.51.1.8	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPInterfaceNdpRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPInterfaceNdpRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPInterfaceNdpRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3TrafficIPInterfaceIPv6AddressTable	1.3.6.1.4.1.2544.1.12.37.1.52		not-accessible	Traffic interface IPv6 address table. Must set f3L3TrafficIPIfActionX as optimizeIPv6AddressEntryRetrieve(3) before get data from this table.
f3L3TrafficIPInterfaceIPv6AddressEntry	1.3.6.1.4.1.2544.1.12.37.1.52.1		not-accessible	A conceptual row in the f3L3TrafficIPInterfaceIPv6AddressTable.
I32 f3L3TrafficIPInterfaceIPv6AddressIndex	1.3.6.1.4.1.2544.1.12.37.1.52.1.1	Integer32	not-accessible	The unique integer index value corresponding to a traffic IP interface IPv6 unicast address.
ADR f3L3TrafficIPInterfaceIPv6AddressAssignMode	1.3.6.1.4.1.2544.1.12.37.1.52.1.2	Ipv6AddressAssignMode	read-write	The assignment mode of IPv6 Unicast Address.
ADR f3L3TrafficIPInterfaceIPv6AddressUnicastAddr	1.3.6.1.4.1.2544.1.12.37.1.52.1.3	Ipv6Address	read-write	This is IPv6 Unicast Address.
I32 f3L3TrafficIPInterfaceIPv6AddressUnicastAddrPrefixLength	1.3.6.1.4.1.2544.1.12.37.1.52.1.4	Integer32	read-write	This is prefix length of the unicast address.
STR f3L3TrafficIPInterfaceIPv6AddressUnicastAddrAutoGenPrefix	1.3.6.1.4.1.2544.1.12.37.1.52.1.5	DisplayString	read-write	This is prefix of the unicast address in automatic address assignment mode.
STO f3L3TrafficIPInterfaceIPv6AddressStorageType	1.3.6.1.4.1.2544.1.12.37.1.52.1.6	StorageType	read-create	The storage type for this conceptual row.
ROW f3L3TrafficIPInterfaceIPv6AddressRowStatus	1.3.6.1.4.1.2544.1.12.37.1.52.1.7	RowStatus	read-create	The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3L3TrafficIPInterfaceIPv6AddressRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3L3TrafficIPInterfaceIPv6AddressRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3L3TrafficIPInterfaceIPv6AddressRowStatus object may be modified if the associated instance of this object is equal to active(1).
f3L3Performance	1.3.6.1.4.1.2544.1.12.37.2
f3L3FlowPointStatsTable	1.3.6.1.4.1.2544.1.12.37.2.1		not-accessible	A collection of L3 Flow Point related statistics. These reflect the current data.
f3L3FlowPointStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.1.1		not-accessible	A conceptual row in the f3L3FlowPointStatsTable. Entries exist in this table for each L3 flow point.
I32 f3L3FlowPointStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.1.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L3FlowPointStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.1.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L3FlowPointStatsValid	1.3.6.1.4.1.2544.1.12.37.2.1.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3FlowPointStatsAction	1.3.6.1.4.1.2544.1.12.37.2.1.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3FlowPointStatsFMG	1.3.6.1.4.1.2544.1.12.37.2.1.1.5	PerfCounter64	read-only	The number of Frames Marked Green.
NUM f3L3FlowPointStatsFMY	1.3.6.1.4.1.2544.1.12.37.2.1.1.6	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM f3L3FlowPointStatsFMRD	1.3.6.1.4.1.2544.1.12.37.2.1.1.7	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM f3L3FlowPointStatsFTD	1.3.6.1.4.1.2544.1.12.37.2.1.1.8	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM f3L3FlowPointStatsFragmentedDropAcl	1.3.6.1.4.1.2544.1.12.37.2.1.1.9	PerfCounter64	read-only	The number of dropped fragmented packets.
NUM f3L3FlowPointStatsAclRuleDrop	1.3.6.1.4.1.2544.1.12.37.2.1.1.10	PerfCounter64	read-only	The number of dropped packets due to ACL rule.
NUM f3L3FlowPointStatsTtlEqual1Drop	1.3.6.1.4.1.2544.1.12.37.2.1.1.11	PerfCounter64	read-only	the number of dropped packets due to ttl's value is 1.
NUM f3L3FlowPointStatsFrameTx	1.3.6.1.4.1.2544.1.12.37.2.1.1.12	PerfCounter64	read-only	The number of total transmitted frames.
NUM f3L3FlowPointStatsFrameRx	1.3.6.1.4.1.2544.1.12.37.2.1.1.13	PerfCounter64	read-only	The number of total received frames.
NUM f3L3FlowPointStatsNoRouteDrop	1.3.6.1.4.1.2544.1.12.37.2.1.1.14	PerfCounter64	read-only	The number of frames drop due to no route.
NUM f3L3FlowPointStatsHopLimitDrop	1.3.6.1.4.1.2544.1.12.37.2.1.1.15	PerfCounter64	read-only	The number of frames drop due to hop limit.
f3L3FlowPointHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.2		not-accessible	A collection of L3 Flow Point related statistics. These reflect the current data.
f3L3FlowPointHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.2.1		not-accessible	A conceptual row in the f3L3FlowPointHistoryTable. Entries exist in this table for each L3 flow point.
I32 f3L3FlowPointHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.2.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
DAT f3L3FlowPointHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.2.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L3FlowPointHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.2.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3FlowPointHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.2.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3FlowPointHistoryFMG	1.3.6.1.4.1.2544.1.12.37.2.2.1.5	PerfCounter64	read-only	The number of Frames Marked Green.
NUM f3L3FlowPointHistoryFMY	1.3.6.1.4.1.2544.1.12.37.2.2.1.6	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM f3L3FlowPointHistoryFMRD	1.3.6.1.4.1.2544.1.12.37.2.2.1.7	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM f3L3FlowPointHistoryFTD	1.3.6.1.4.1.2544.1.12.37.2.2.1.8	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM f3L3FlowPointHistoryFragmentedDropAcl	1.3.6.1.4.1.2544.1.12.37.2.2.1.9	PerfCounter64	read-only	The number of dropped fragmented packets.
NUM f3L3FlowPointHistoryAclRuleDrop	1.3.6.1.4.1.2544.1.12.37.2.2.1.10	PerfCounter64	read-only	The number of dropped packets due to ACL rule.
NUM f3L3FlowPointHistoryTtlEqual1Drop	1.3.6.1.4.1.2544.1.12.37.2.2.1.11	PerfCounter64	read-only	the number of dropped packets due to ttl's value is 1.
NUM f3L3FlowPointHistoryFrameTx	1.3.6.1.4.1.2544.1.12.37.2.2.1.12	PerfCounter64	read-only	The number of total transmitted frames.
NUM f3L3FlowPointHistoryFrameRx	1.3.6.1.4.1.2544.1.12.37.2.2.1.13	PerfCounter64	read-only	the number of total recieved frames.
NUM f3L3FlowPointHistoryNoRouteDrop	1.3.6.1.4.1.2544.1.12.37.2.2.1.14	PerfCounter64	read-only	the number of frames dropped due to no route.
NUM f3L3FlowPointHistoryHopLimitDrop	1.3.6.1.4.1.2544.1.12.37.2.2.1.15	PerfCounter64	read-only	the number of frames dropped due to hop limit.
f3L3FlowPointThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.3		not-accessible	A table of entries that allow manageability of L3 Flow Point Thresholds.
f3L3FlowPointThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.3.1		not-accessible	A conceptual row in the f3L3FlowPointThresholdTable.
I32 f3L3FlowPointThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.3.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L3FlowPointThresholdTable.
NUM f3L3FlowPointThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.3.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L3FlowPointThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.3.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L3FlowPointThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.3.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L3FlowPointThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.3.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L3FlowPointThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.3.1.6	Counter64	read-only	Monitored value corresponding to f3L3FlowPointThresholdVariable.
f3L3TrafficIpInterfaceStatsTable	1.3.6.1.4.1.2544.1.12.37.2.4		not-accessible	A collection of L3 traffic ip interface related statistics. These reflect the current data.
f3L3TrafficIpInterfaceStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.4.1		not-accessible	A conceptual row in the f3L3TrafficIpInterfaceStatsTable. Entries exist in this table for each L3 traffic ip interface.
I32 f3L3TrafficIpInterfaceStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.4.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L3TrafficIpInterfaceStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.4.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L3TrafficIpInterfaceStatsValid	1.3.6.1.4.1.2544.1.12.37.2.4.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3TrafficIpInterfaceStatsAction	1.3.6.1.4.1.2544.1.12.37.2.4.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3TrafficIpInterfaceStatsDhcpTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.5	PerfCounter64	read-only	The number of packets DHCP Transmit.
NUM f3L3TrafficIpInterfaceStatsDhcpRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.6	PerfCounter64	read-only	The number of packets DHCP Recieved.
NUM f3L3TrafficIpInterfaceStatsIcmpTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.7	PerfCounter64	read-only	The number of packets Icmp protocol transmit.
NUM f3L3TrafficIpInterfaceStatsIcmpRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.8	PerfCounter64	read-only	The number of packets Icmp protocol recieved.
NUM f3L3TrafficIpInterfaceStatsArpReqTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.9	PerfCounter64	read-only	The number of transmit packets due to ARP request.
NUM f3L3TrafficIpInterfaceStatsArpReqRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.10	PerfCounter64	read-only	The number of recieved packets due to ARP request.
NUM f3L3TrafficIpInterfaceStatsArpReplyTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.11	PerfCounter64	read-only	The number of transmit packets due to ARP reply.
NUM f3L3TrafficIpInterfaceStatsArpReplyRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.12	PerfCounter64	read-only	The number of recieved packets due to ARP reply.
NUM f3L3TrafficIpInterfaceStatsDhcpV6Tx	1.3.6.1.4.1.2544.1.12.37.2.4.1.13	PerfCounter64	read-only	The number of packets DHCPv6 Transmit.
NUM f3L3TrafficIpInterfaceStatsDhcpV6Rx	1.3.6.1.4.1.2544.1.12.37.2.4.1.14	PerfCounter64	read-only	The number of packets DHCPv6 Recieved.
NUM f3L3TrafficIpInterfaceStatsIcmpV6WONdpTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.15	PerfCounter64	read-only	The number of packets Icmpv6 protocol transmit.
NUM f3L3TrafficIpInterfaceStatsIcmpV6WONdpRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.16	PerfCounter64	read-only	The number of packets Icmpv6 protocol recieved.
NUM f3L3TrafficIpInterfaceStatsNdpNSTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.17	PerfCounter64	read-only	The number of transmit NS message.
NUM f3L3TrafficIpInterfaceStatsNdpNSRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.18	PerfCounter64	read-only	The number of recieved NS message.
NUM f3L3TrafficIpInterfaceStatsNdpNATx	1.3.6.1.4.1.2544.1.12.37.2.4.1.19	PerfCounter64	read-only	The number of transmit NA message.
NUM f3L3TrafficIpInterfaceStatsNdpNARx	1.3.6.1.4.1.2544.1.12.37.2.4.1.20	PerfCounter64	read-only	The number of recieved NA message.
NUM f3L3TrafficIpInterfaceStatsNdpRATx	1.3.6.1.4.1.2544.1.12.37.2.4.1.21	PerfCounter64	read-only	The number of transmit RA message.
NUM f3L3TrafficIpInterfaceStatsNdpRARx	1.3.6.1.4.1.2544.1.12.37.2.4.1.22	PerfCounter64	read-only	The number of recieved RA message.
NUM f3L3TrafficIpInterfaceStatsNdpRSTx	1.3.6.1.4.1.2544.1.12.37.2.4.1.23	PerfCounter64	read-only	The number of transmit RS message.
NUM f3L3TrafficIpInterfaceStatsNdpRSRx	1.3.6.1.4.1.2544.1.12.37.2.4.1.24	PerfCounter64	read-only	The number of recieved RS message.
f3L3TrafficIpInterfaceHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.5		not-accessible	A collection of L3 traffic ip interface related history statistics. These reflect the history data.
f3L3TrafficIpInterfaceHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.5.1		not-accessible	A conceptual row in the f3L3TrafficIpInterfaceHistoryTable. Entries exist in this table for each L3 traffic ip interface.
I32 f3L3TrafficIpInterfaceHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.5.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify the history bin
DAT f3L3TrafficIpInterfaceHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.5.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L3TrafficIpInterfaceHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.5.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3TrafficIpInterfaceHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.5.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3TrafficIpInterfaceHistoryDhcpTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.5	PerfCounter64	read-only	The number of packets DHCP Transmit.
NUM f3L3TrafficIpInterfaceHistoryDhcpRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.6	PerfCounter64	read-only	The number of packets DHCP Recieved.
NUM f3L3TrafficIpInterfaceHistoryIcmpTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.7	PerfCounter64	read-only	The number of packets Icmp protocol transmit.
NUM f3L3TrafficIpInterfaceHistoryIcmpRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.8	PerfCounter64	read-only	The number of packets Icmp protocol recieved.
NUM f3L3TrafficIpInterfaceHistoryArpReqTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.9	PerfCounter64	read-only	The number of transmit packets due to ARP request.
NUM f3L3TrafficIpInterfaceHistoryArpReqRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.10	PerfCounter64	read-only	the number of recieved packets due to ARP request.
NUM f3L3TrafficIpInterfaceHistoryArpReplyTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.11	PerfCounter64	read-only	The number of transmit packets due to ARP reply.
NUM f3L3TrafficIpInterfaceHistoryArpReplyRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.12	PerfCounter64	read-only	the number of recieved packets due to ARP reply.
NUM f3L3TrafficIpInterfaceHistoryDhcpV6Tx	1.3.6.1.4.1.2544.1.12.37.2.5.1.13	PerfCounter64	read-only	The number of packets DHCPv6 Transmit.
NUM f3L3TrafficIpInterfaceHistoryDhcpV6Rx	1.3.6.1.4.1.2544.1.12.37.2.5.1.14	PerfCounter64	read-only	The number of packets DHCPv6 Recieved.
NUM f3L3TrafficIpInterfaceHistoryIcmpV6WONdpTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.15	PerfCounter64	read-only	The number of packets Icmpv6 protocol transmit.
NUM f3L3TrafficIpInterfaceHistoryIcmpV6WONdpRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.16	PerfCounter64	read-only	The number of packets Icmpv6 protocol recieved.
NUM f3L3TrafficIpInterfaceHistoryNdpNSTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.17	PerfCounter64	read-only	The number of transmit NS message.
NUM f3L3TrafficIpInterfaceHistoryNdpNSRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.18	PerfCounter64	read-only	The number of recieved NS message.
NUM f3L3TrafficIpInterfaceHistoryNdpNATx	1.3.6.1.4.1.2544.1.12.37.2.5.1.19	PerfCounter64	read-only	The number of transmit NA message.
NUM f3L3TrafficIpInterfaceHistoryNdpNARx	1.3.6.1.4.1.2544.1.12.37.2.5.1.20	PerfCounter64	read-only	The number of recieved NA message.
NUM f3L3TrafficIpInterfaceHistoryNdpRATx	1.3.6.1.4.1.2544.1.12.37.2.5.1.21	PerfCounter64	read-only	The number of transmit RA message.
NUM f3L3TrafficIpInterfaceHistoryNdpRARx	1.3.6.1.4.1.2544.1.12.37.2.5.1.22	PerfCounter64	read-only	The number of recieved RA message.
NUM f3L3TrafficIpInterfaceHistoryNdpRSTx	1.3.6.1.4.1.2544.1.12.37.2.5.1.23	PerfCounter64	read-only	The number of transmit RS message.
NUM f3L3TrafficIpInterfaceHistoryNdpRSRx	1.3.6.1.4.1.2544.1.12.37.2.5.1.24	PerfCounter64	read-only	The number of recieved RS message.
f3L3TrafficIpInterfaceThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.6		not-accessible	A table of entries that allow manageability of L3 traffic ip interface Thresholds.
f3L3TrafficIpInterfaceThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.6.1		not-accessible	A conceptual row in the f3L3TrafficIpInterfaceThresholdTable.
I32 f3L3TrafficIpInterfaceThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.6.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L3TrafficIpInterfaceThresholdTable.
NUM f3L3TrafficIpInterfaceThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.6.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L3TrafficIpInterfaceThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.6.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L3TrafficIpInterfaceThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.6.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L3TrafficIpInterfaceThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.6.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L3TrafficIpInterfaceThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.6.1.6	Counter64	read-only	Monitored value corresponding to f3L3TrafficIpInterfaceThresholdVariable.
f3L3AclRuleStatsTable	1.3.6.1.4.1.2544.1.12.37.2.7		not-accessible	A collection of L3 acl rule related statistics. These reflect the current data.
f3L3AclRuleStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.7.1		not-accessible	A conceptual row in the f3L3AclRuleStatsTable. Entries exist in this table for each Acl rule.
I32 f3L3AclRuleStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.7.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L3AclRuleStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.7.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L3AclRuleStatsValid	1.3.6.1.4.1.2544.1.12.37.2.7.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3AclRuleStatsAction	1.3.6.1.4.1.2544.1.12.37.2.7.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3AclRuleStatsRuleMatch	1.3.6.1.4.1.2544.1.12.37.2.7.1.5	PerfCounter64	read-only	The number of packets matching the ACL rule.
f3L3AclRuleHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.8		not-accessible	A collection of L3 acl rule related history statistics. These reflect the history data.
f3L3AclRuleHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.8.1		not-accessible	A conceptual row in the f3L3AclRuleHistoryTable. Entries exist in this table for each L3 acl rule.
I32 f3L3AclRuleHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.8.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify the history bin.
DAT f3L3AclRuleHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.8.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L3AclRuleHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.8.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3AclRuleHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.8.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3AclRuleHistoryRuleMatch	1.3.6.1.4.1.2544.1.12.37.2.8.1.5	PerfCounter64	read-only	The number of packets matching acl rule.
f3L3AclRuleThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.9		not-accessible	A table of entries that allow manageability of L3 acl rule Thresholds.
f3L3AclRuleThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.9.1		not-accessible	A conceptual row in the f3L3AclRuleThresholdTable.
I32 f3L3AclRuleThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.9.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L3AclRuleThresholdTable.
NUM f3L3AclRuleThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.9.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L3AclRuleThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.9.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L3AclRuleThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.9.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L3AclRuleThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.9.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L3AclRuleThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.9.1.6	Counter64	read-only	Monitored value corresponding to f3L3AclRuleThresholdVariable.
f3L3QosPolicerStatsTable	1.3.6.1.4.1.2544.1.12.37.2.10		not-accessible	A collection of QOS Policer statistics. These reflect the current data.
f3L3QosPolicerStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.10.1		not-accessible	A conceptual row in the f3L3QosPolicerStatsTable. Entries exist in this table for each l3 flow point policer.
I32 f3L3QosPolicerStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.10.1.1	Integer32	read-only	An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L3QosPolicerStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.10.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L3QosPolicerStatsValid	1.3.6.1.4.1.2544.1.12.37.2.10.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3QosPolicerStatsAction	1.3.6.1.4.1.2544.1.12.37.2.10.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3QosPolicerStatsFMG	1.3.6.1.4.1.2544.1.12.37.2.10.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM f3L3QosPolicerStatsFMY	1.3.6.1.4.1.2544.1.12.37.2.10.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM f3L3QosPolicerStatsFMYD	1.3.6.1.4.1.2544.1.12.37.2.10.1.7	PerfCounter64	read-only	Frames Marked Yellow and Dropped.
NUM f3L3QosPolicerStatsFMRD	1.3.6.1.4.1.2544.1.12.37.2.10.1.8	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM f3L3QosPolicerStatsBytesIn	1.3.6.1.4.1.2544.1.12.37.2.10.1.9	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM f3L3QosPolicerStatsBytesOut	1.3.6.1.4.1.2544.1.12.37.2.10.1.10	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM f3L3QosPolicerStatsABR	1.3.6.1.4.1.2544.1.12.37.2.10.1.11	PerfCounter64	read-only	Average Bit Rate on the Policer.
f3L3QosPolicerHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.11		not-accessible	A collection of QOS Policer statistics. These reflect the current data.
f3L3QosPolicerHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.11.1		not-accessible	A conceptual row in the f3L3QosPolicerHistoryTable. Entries exist in this table for each flow point policer.
I32 f3L3QosPolicerHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.11.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Policer history entry.
DAT f3L3QosPolicerHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.11.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L3QosPolicerHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.11.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3QosPolicerHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.11.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3QosPolicerHistoryFMG	1.3.6.1.4.1.2544.1.12.37.2.11.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM f3L3QosPolicerHistoryFMY	1.3.6.1.4.1.2544.1.12.37.2.11.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM f3L3QosPolicerHistoryFMYD	1.3.6.1.4.1.2544.1.12.37.2.11.1.7	PerfCounter64	read-only	Frames Marked Yellow and Dropped.
NUM f3L3QosPolicerHistoryFMRD	1.3.6.1.4.1.2544.1.12.37.2.11.1.8	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM f3L3QosPolicerHistoryBytesIn	1.3.6.1.4.1.2544.1.12.37.2.11.1.9	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM f3L3QosPolicerHistoryBytesOut	1.3.6.1.4.1.2544.1.12.37.2.11.1.10	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM f3L3QosPolicerHistoryABR	1.3.6.1.4.1.2544.1.12.37.2.11.1.11	PerfCounter64	read-only	Average Bit Rate on the Policer.
f3L3QosPolicerThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.12		not-accessible	A table of entries that allow manageability of QOS Policer Thresholds.
f3L3QosPolicerThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.12.1		not-accessible	A conceptual row in the f3L3QosPolicerThresholdTable.
I32 f3L3QosPolicerThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.12.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L3QosPolicerThresholdTable.
NUM f3L3QosPolicerThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.12.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L3QosPolicerThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.12.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L3QosPolicerThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.12.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L3QosPolicerThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.12.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L3QosPolicerThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.12.1.6	Counter64	read-only	Monitored value corresponding to f3L3QosPolicerThresholdVariable.
f3L3QosShaperStatsTable	1.3.6.1.4.1.2544.1.12.37.2.13		not-accessible	A collection of L3 flow point Level QOS Shaper statistics. These reflect the current data.
f3L3QosShaperStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.13.1		not-accessible	A conceptual row in the f3L3QosShaperStatsTable. Entries exist in this table for each QOS Shaper per L3 flow point.
I32 f3L3QosShaperStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.13.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L3QosShaperStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.13.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L3QosShaperStatsValid	1.3.6.1.4.1.2544.1.12.37.2.13.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3QosShaperStatsAction	1.3.6.1.4.1.2544.1.12.37.2.13.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3QosShaperStatsBT	1.3.6.1.4.1.2544.1.12.37.2.13.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM f3L3QosShaperStatsBTD	1.3.6.1.4.1.2544.1.12.37.2.13.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM f3L3QosShaperStatsFD	1.3.6.1.4.1.2544.1.12.37.2.13.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM f3L3QosShaperStatsFTD	1.3.6.1.4.1.2544.1.12.37.2.13.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM f3L3QosShaperStatsBR	1.3.6.1.4.1.2544.1.12.37.2.13.1.9	PerfCounter64	read-only	Bytes Replicated.
NUM f3L3QosShaperStatsFR	1.3.6.1.4.1.2544.1.12.37.2.13.1.10	PerfCounter64	read-only	Frames Replicated.
NUM f3L3QosShaperStatsABRRL	1.3.6.1.4.1.2544.1.12.37.2.13.1.11	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM f3L3QosShaperStatsABRRLR	1.3.6.1.4.1.2544.1.12.37.2.13.1.12	PerfCounter64	read-only	Average Bit Rate - Rate Limited, Replicated.
NUM f3L3QosShaperStatsBREDD	1.3.6.1.4.1.2544.1.12.37.2.13.1.13	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM f3L3QosShaperStatsFREDD	1.3.6.1.4.1.2544.1.12.37.2.13.1.14	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
f3L3QosShaperHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.14		not-accessible	A collection of l3 flow point Level QOS Shaper statistics. These reflect the history data.
f3L3QosShaperHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.14.1		not-accessible	A conceptual row in the f3L3QosShaperHistoryTable. Entries exist in this table for each Shaper per l3 flow point.
I32 f3L3QosShaperHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.14.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry.
DAT f3L3QosShaperHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.14.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L3QosShaperHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.14.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3QosShaperHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.14.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3QosShaperHistoryBT	1.3.6.1.4.1.2544.1.12.37.2.14.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM f3L3QosShaperHistoryBTD	1.3.6.1.4.1.2544.1.12.37.2.14.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM f3L3QosShaperHistoryFD	1.3.6.1.4.1.2544.1.12.37.2.14.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM f3L3QosShaperHistoryFTD	1.3.6.1.4.1.2544.1.12.37.2.14.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM f3L3QosShaperHistoryBR	1.3.6.1.4.1.2544.1.12.37.2.14.1.9	PerfCounter64	read-only	Bytes Replicated.
NUM f3L3QosShaperHistoryFR	1.3.6.1.4.1.2544.1.12.37.2.14.1.10	PerfCounter64	read-only	Frames Replicated.
NUM f3L3QosShaperHistoryABRRL	1.3.6.1.4.1.2544.1.12.37.2.14.1.11	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM f3L3QosShaperHistoryABRRLR	1.3.6.1.4.1.2544.1.12.37.2.14.1.12	PerfCounter64	read-only	Average Bit Rate - Rate Limited, Replicated.
NUM f3L3QosShaperHistoryBREDD	1.3.6.1.4.1.2544.1.12.37.2.14.1.13	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM f3L3QosShaperHistoryFREDD	1.3.6.1.4.1.2544.1.12.37.2.14.1.14	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
f3L3QosShaperThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.15		not-accessible	A table of entries that allow manageability of QOS Shaper Thresholds.
f3L3QosShaperThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.15.1		not-accessible	A conceptual row in the f3L3QosShaperThresholdTable.
I32 f3L3QosShaperThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.15.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L3QosShaperThresholdTable.
NUM f3L3QosShaperThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.15.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L3QosShaperThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.15.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L3QosShaperThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.15.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L3QosShaperThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.15.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L3QosShaperThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.15.1.6	Counter64	read-only	Monitored value corresponding to f3L3QosShaperThresholdVariable.
f3L2A2NAclRuleStatsTable	1.3.6.1.4.1.2544.1.12.37.2.16		not-accessible	A collection of L3 acl rule related statistics. These reflect the current data.
f3L2A2NAclRuleStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.16.1		not-accessible	A conceptual row in the f3L2A2NAclRuleStatsTable. Entries exist in this table for each Acl rule.
I32 f3L2A2NAclRuleStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.16.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L2A2NAclRuleStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.16.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L2A2NAclRuleStatsValid	1.3.6.1.4.1.2544.1.12.37.2.16.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L2A2NAclRuleStatsAction	1.3.6.1.4.1.2544.1.12.37.2.16.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L2A2NAclRuleStatsRuleMatch	1.3.6.1.4.1.2544.1.12.37.2.16.1.5	PerfCounter64	read-only	The number of packets matching the ACL rule.
f3L2A2NAclRuleHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.17		not-accessible	A collection of L3 acl rule related history statistics. These reflect the history data.
f3L2A2NAclRuleHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.17.1		not-accessible	A conceptual row in the f3L2A2NAclRuleHistoryTable. Entries exist in this table for each L3 acl rule.
I32 f3L2A2NAclRuleHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.17.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
DAT f3L2A2NAclRuleHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.17.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L2A2NAclRuleHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.17.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L2A2NAclRuleHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.17.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L2A2NAclRuleHistoryRuleMatch	1.3.6.1.4.1.2544.1.12.37.2.17.1.5	PerfCounter64	read-only	The number of packets matching acl rule.
f3L2A2NAclRuleThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.18		not-accessible	A table of entries that allow manageability of L3 acl rule Thresholds.
f3L2A2NAclRuleThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.18.1		not-accessible	A conceptual row in the f3L2A2NAclRuleThresholdTable.
I32 f3L2A2NAclRuleThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.18.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L2A2NAclRuleThresholdTable.
NUM f3L2A2NAclRuleThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.18.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L2A2NAclRuleThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.18.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L2A2NAclRuleThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.18.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L2A2NAclRuleThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.18.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L2A2NAclRuleThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.18.1.6	Counter64	read-only	Monitored value corresponding to f3L2A2NAclRuleThresholdVariable.
f3L2N2AAclRuleStatsTable	1.3.6.1.4.1.2544.1.12.37.2.19		not-accessible	A collection of L3 acl rule related statistics. These reflect the current data.
f3L2N2AAclRuleStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.19.1		not-accessible	A conceptual row in the f3L2N2AAclRuleStatsTable. Entries exist in this table for each Acl rule.
I32 f3L2N2AAclRuleStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.19.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L2N2AAclRuleStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.19.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L2N2AAclRuleStatsValid	1.3.6.1.4.1.2544.1.12.37.2.19.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L2N2AAclRuleStatsAction	1.3.6.1.4.1.2544.1.12.37.2.19.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L2N2AAclRuleStatsRuleMatch	1.3.6.1.4.1.2544.1.12.37.2.19.1.5	PerfCounter64	read-only	The number of packets matching the ACL rule.
f3L2N2AAclRuleHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.20		not-accessible	A collection of L3 acl rule related history statistics. These reflect the history data.
f3L2N2AAclRuleHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.20.1		not-accessible	A conceptual row in the f3L2N2AAclRuleHistoryTable. Entries exist in this table for each L3 acl rule.
I32 f3L2N2AAclRuleHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.20.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
DAT f3L2N2AAclRuleHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.20.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L2N2AAclRuleHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.20.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L2N2AAclRuleHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.20.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L2N2AAclRuleHistoryRuleMatch	1.3.6.1.4.1.2544.1.12.37.2.20.1.5	PerfCounter64	read-only	The number of packets matching acl rule.
f3L2N2AAclRuleThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.21		not-accessible	A table of entries that allow manageability of L3 acl rule Thresholds.
f3L2N2AAclRuleThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.21.1		not-accessible	A conceptual row in the f3L2N2AAclRuleThresholdTable.
I32 f3L2N2AAclRuleThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.21.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L2N2AAclRuleThresholdTable.
NUM f3L2N2AAclRuleThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.21.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L2N2AAclRuleThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.21.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L2N2AAclRuleThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.21.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L2N2AAclRuleThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.21.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L2N2AAclRuleThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.21.1.6	Counter64	read-only	Monitored value corresponding to f3L2N2AAclRuleThresholdVariable.
f3L3TrafficIPv6InterfaceStatsTable	1.3.6.1.4.1.2544.1.12.37.2.22		not-accessible	A collection of L3 traffic ipv6 interface related statistics. These reflect the current data.
f3L3TrafficIPv6InterfaceStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.22.1		not-accessible	A conceptual row in the f3L3TrafficIPv6InterfaceStatsTable. Entries exist in this table for each L3 traffic ipv6 interface.
I32 f3L3TrafficIPv6InterfaceStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.22.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 Traffic IPv6 interface statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM f3L3TrafficIPv6InterfaceStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.22.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F f3L3TrafficIPv6InterfaceStatsValid	1.3.6.1.4.1.2544.1.12.37.2.22.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3TrafficIPv6InterfaceStatsAction	1.3.6.1.4.1.2544.1.12.37.2.22.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3TrafficIPv6InterfaceStatsDhcpV6Tx	1.3.6.1.4.1.2544.1.12.37.2.22.1.5	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsDhcpV6Rx	1.3.6.1.4.1.2544.1.12.37.2.22.1.6	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsIcmpV6WONdpTx	1.3.6.1.4.1.2544.1.12.37.2.22.1.7	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsIcmpV6WONdpRx	1.3.6.1.4.1.2544.1.12.37.2.22.1.8	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpNSTx	1.3.6.1.4.1.2544.1.12.37.2.22.1.9	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpNSRx	1.3.6.1.4.1.2544.1.12.37.2.22.1.10	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpNATx	1.3.6.1.4.1.2544.1.12.37.2.22.1.11	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpNARx	1.3.6.1.4.1.2544.1.12.37.2.22.1.12	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpRATx	1.3.6.1.4.1.2544.1.12.37.2.22.1.13	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpRARx	1.3.6.1.4.1.2544.1.12.37.2.22.1.14	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpRSTx	1.3.6.1.4.1.2544.1.12.37.2.22.1.15	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceStatsNdpRSRx	1.3.6.1.4.1.2544.1.12.37.2.22.1.16	PerfCounter64	read-only	.
f3L3TrafficIPv6InterfaceHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.23		not-accessible	A collection of L3 traffic ipv6 interface related statistics. These reflect the current data.
f3L3TrafficIPv6InterfaceHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.23.1		not-accessible	A conceptual row in the f3L3TrafficIPv6InterfaceHistoryTable. Entries exist in this table for each L3 traffic ipv6 interface.
I32 f3L3TrafficIPv6InterfaceHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.23.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 Traffic IPv6 interface statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
DAT f3L3TrafficIPv6InterfaceHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.23.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F f3L3TrafficIPv6InterfaceHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.23.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP f3L3TrafficIPv6InterfaceHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.23.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM f3L3TrafficIPv6InterfaceHistoryDhcpV6Tx	1.3.6.1.4.1.2544.1.12.37.2.23.1.5	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryDhcpV6Rx	1.3.6.1.4.1.2544.1.12.37.2.23.1.6	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryIcmpV6WONdpTx	1.3.6.1.4.1.2544.1.12.37.2.23.1.7	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryIcmpV6WONdpRx	1.3.6.1.4.1.2544.1.12.37.2.23.1.8	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpNSTx	1.3.6.1.4.1.2544.1.12.37.2.23.1.9	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpNSRx	1.3.6.1.4.1.2544.1.12.37.2.23.1.10	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpNATx	1.3.6.1.4.1.2544.1.12.37.2.23.1.11	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpNARx	1.3.6.1.4.1.2544.1.12.37.2.23.1.12	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpRATx	1.3.6.1.4.1.2544.1.12.37.2.23.1.13	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpRARx	1.3.6.1.4.1.2544.1.12.37.2.23.1.14	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpRSTx	1.3.6.1.4.1.2544.1.12.37.2.23.1.15	PerfCounter64	read-only	.
NUM f3L3TrafficIPv6InterfaceHistoryNdpRSRx	1.3.6.1.4.1.2544.1.12.37.2.23.1.16	PerfCounter64	read-only	.
f3L3TrafficIPv6InterfaceThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.24		not-accessible	A table of entries that allow manageability of L3 traffic ipv6 interface Thresholds.
f3L3TrafficIPv6InterfaceThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.24.1		not-accessible	A conceptual row in the f3L3TrafficIPv6InterfaceThresholdTable.
I32 f3L3TrafficIPv6InterfaceThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.24.1.1	Integer32	read-only	An index that uniquely identifies an entry in the f3L3TrafficIPv6InterfaceThresholdTable.
NUM f3L3TrafficIPv6InterfaceThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.24.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM f3L3TrafficIPv6InterfaceThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.24.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 f3L3TrafficIPv6InterfaceThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.24.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 f3L3TrafficIPv6InterfaceThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.24.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 f3L3TrafficIPv6InterfaceThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.24.1.6	Counter64	read-only	Monitored value corresponding to f3L3TrafficIPv6InterfaceThresholdVariable.
cmL3FlowPointStatsTable	1.3.6.1.4.1.2544.1.12.37.2.25		not-accessible	A collection of L3 Flow Point related statistics. These reflect the current data.
cmL3FlowPointStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.25.1		not-accessible	A conceptual row in the cmL3FlowPointStatsTable. Entries exist in this table for each L3 flow point.
I32 cmL3FlowPointStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.25.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this L3 flow point statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM cmL3FlowPointStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.25.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F cmL3FlowPointStatsValid	1.3.6.1.4.1.2544.1.12.37.2.25.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP cmL3FlowPointStatsAction	1.3.6.1.4.1.2544.1.12.37.2.25.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM cmL3FlowPointStatsFMG	1.3.6.1.4.1.2544.1.12.37.2.25.1.5	PerfCounter64	read-only	The number of Frames Marked Green.
NUM cmL3FlowPointStatsFMY	1.3.6.1.4.1.2544.1.12.37.2.25.1.6	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM cmL3FlowPointStatsFMRD	1.3.6.1.4.1.2544.1.12.37.2.25.1.7	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM cmL3FlowPointStatsFTD	1.3.6.1.4.1.2544.1.12.37.2.25.1.8	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM cmL3FlowPointStatsFragmentedDropAcl	1.3.6.1.4.1.2544.1.12.37.2.25.1.9	PerfCounter64	read-only	The number of dropped fragmented packets.
NUM cmL3FlowPointStatsAclRuleDrop	1.3.6.1.4.1.2544.1.12.37.2.25.1.10	PerfCounter64	read-only	The number of dropped packets due to ACL rule.
NUM cmL3FlowPointStatsTtlEqual1Drop	1.3.6.1.4.1.2544.1.12.37.2.25.1.11	PerfCounter64	read-only	the number of dropped packets due to ttl's value is 1.
NUM cmL3FlowPointStatsFrameTx	1.3.6.1.4.1.2544.1.12.37.2.25.1.12	PerfCounter64	read-only	The number of total transmitted frames.
NUM cmL3FlowPointStatsFrameRx	1.3.6.1.4.1.2544.1.12.37.2.25.1.13	PerfCounter64	read-only	The number of total received frames.
NUM cmL3FlowPointStatsNoRouteDrop	1.3.6.1.4.1.2544.1.12.37.2.25.1.14	PerfCounter64	read-only	The number of frames drop due to no route.
NUM cmL3FlowPointStatsAclDropNoMatch	1.3.6.1.4.1.2544.1.12.37.2.25.1.15	PerfCounter64	read-only	The number of dropped packets due to no match in ACL rule.
cmL3FlowPointHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.26		not-accessible	A collection of L3 Flow Point related statistics. These reflect the current data.
cmL3FlowPointHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.26.1		not-accessible	A conceptual row in the cmL3FlowPointHistoryTable. Entries exist in this table for each L3 flow point.
I32 cmL3FlowPointHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.26.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify the history bin.
DAT cmL3FlowPointHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.26.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F cmL3FlowPointHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.26.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP cmL3FlowPointHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.26.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM cmL3FlowPointHistoryFMG	1.3.6.1.4.1.2544.1.12.37.2.26.1.5	PerfCounter64	read-only	The number of Frames Marked Green.
NUM cmL3FlowPointHistoryFMY	1.3.6.1.4.1.2544.1.12.37.2.26.1.6	PerfCounter64	read-only	The number of Frames Marked Yellow.
NUM cmL3FlowPointHistoryFMRD	1.3.6.1.4.1.2544.1.12.37.2.26.1.7	PerfCounter64	read-only	The number of Frames Marked Red and Discarded.
NUM cmL3FlowPointHistoryFTD	1.3.6.1.4.1.2544.1.12.37.2.26.1.8	PerfCounter64	read-only	The number of Frames Tail Dropped.
NUM cmL3FlowPointHistoryFragmentedDropAcl	1.3.6.1.4.1.2544.1.12.37.2.26.1.9	PerfCounter64	read-only	The number of dropped fragmented packets.
NUM cmL3FlowPointHistoryAclRuleDrop	1.3.6.1.4.1.2544.1.12.37.2.26.1.10	PerfCounter64	read-only	The number of dropped packets due to ACL rule.
NUM cmL3FlowPointHistoryTtlEqual1Drop	1.3.6.1.4.1.2544.1.12.37.2.26.1.11	PerfCounter64	read-only	the number of dropped packets due to ttl's value is 1.
NUM cmL3FlowPointHistoryFrameTx	1.3.6.1.4.1.2544.1.12.37.2.26.1.12	PerfCounter64	read-only	The number of total transmitted frames.
NUM cmL3FlowPointHistoryFrameRx	1.3.6.1.4.1.2544.1.12.37.2.26.1.13	PerfCounter64	read-only	the number of total recieved frames.
NUM cmL3FlowPointHistoryNoRouteDrop	1.3.6.1.4.1.2544.1.12.37.2.26.1.14	PerfCounter64	read-only	the number of frames dropped due to no route.
NUM cmL3FlowPointHistoryAclDropNoMatch	1.3.6.1.4.1.2544.1.12.37.2.26.1.15	PerfCounter64	read-only	The number of dropped packets due to no match in ACL rule.
cmL3FlowPointThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.27		not-accessible	A table of entries that allow manageability of L3 Flow Point Thresholds.
cmL3FlowPointThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.27.1		not-accessible	A conceptual row in the cmL3FlowPointThresholdTable.
I32 cmL3FlowPointThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.27.1.1	Integer32	read-only	An index that uniquely identifies an entry in the cmL3FlowPointThresholdTable.
NUM cmL3FlowPointThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.27.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM cmL3FlowPointThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.27.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 cmL3FlowPointThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.27.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 cmL3FlowPointThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.27.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 cmL3FlowPointThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.27.1.6	Counter64	read-only	Monitored value corresponding to cmL3FlowPointThresholdVariable.
cmL3QosPolicerStatsTable	1.3.6.1.4.1.2544.1.12.37.2.28		not-accessible	A collection of QOS Policer statistics. These reflect the current data.
cmL3QosPolicerStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.28.1		not-accessible	A conceptual row in the cmL3QosPolicerStatsTable. Entries exist in this table for each l3 flow point policer.
I32 cmL3QosPolicerStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.28.1.1	Integer32	read-only	An integer index value used to uniquely identify this QOS Policer statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM cmL3QosPolicerStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.28.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F cmL3QosPolicerStatsValid	1.3.6.1.4.1.2544.1.12.37.2.28.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP cmL3QosPolicerStatsAction	1.3.6.1.4.1.2544.1.12.37.2.28.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM cmL3QosPolicerStatsFMG	1.3.6.1.4.1.2544.1.12.37.2.28.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM cmL3QosPolicerStatsFMY	1.3.6.1.4.1.2544.1.12.37.2.28.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM cmL3QosPolicerStatsFMYD	1.3.6.1.4.1.2544.1.12.37.2.28.1.7	PerfCounter64	read-only	Frames Marked Yellow and Dropped.
NUM cmL3QosPolicerStatsFMRD	1.3.6.1.4.1.2544.1.12.37.2.28.1.8	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM cmL3QosPolicerStatsBytesIn	1.3.6.1.4.1.2544.1.12.37.2.28.1.9	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM cmL3QosPolicerStatsBytesOut	1.3.6.1.4.1.2544.1.12.37.2.28.1.10	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM cmL3QosPolicerStatsABR	1.3.6.1.4.1.2544.1.12.37.2.28.1.11	PerfCounter64	read-only	Average Bit Rate on the Policer.
cmL3QosPolicerHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.29		not-accessible	A collection of QOS Policer statistics. These reflect the current data.
cmL3QosPolicerHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.29.1		not-accessible	A conceptual row in the cmL3QosPolicerHistoryTable. Entries exist in this table for each flow point policer.
I32 cmL3QosPolicerHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.29.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Policer history entry.
DAT cmL3QosPolicerHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.29.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F cmL3QosPolicerHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.29.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP cmL3QosPolicerHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.29.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM cmL3QosPolicerHistoryFMG	1.3.6.1.4.1.2544.1.12.37.2.29.1.5	PerfCounter64	read-only	Frames Marked Green.
NUM cmL3QosPolicerHistoryFMY	1.3.6.1.4.1.2544.1.12.37.2.29.1.6	PerfCounter64	read-only	Frames Marked Yellow.
NUM cmL3QosPolicerHistoryFMYD	1.3.6.1.4.1.2544.1.12.37.2.29.1.7	PerfCounter64	read-only	Frames Marked Yellow and Dropped.
NUM cmL3QosPolicerHistoryFMRD	1.3.6.1.4.1.2544.1.12.37.2.29.1.8	PerfCounter64	read-only	Frames Marked Red and Discarded.
NUM cmL3QosPolicerHistoryBytesIn	1.3.6.1.4.1.2544.1.12.37.2.29.1.9	PerfCounter64	read-only	Number of bytes received by the Policer.
NUM cmL3QosPolicerHistoryBytesOut	1.3.6.1.4.1.2544.1.12.37.2.29.1.10	PerfCounter64	read-only	Number of bytes transmitted by the Policer.
NUM cmL3QosPolicerHistoryABR	1.3.6.1.4.1.2544.1.12.37.2.29.1.11	PerfCounter64	read-only	Average Bit Rate on the Policer.
cmL3QosPolicerThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.30		not-accessible	A table of entries that allow manageability of QOS Policer Thresholds.
cmL3QosPolicerThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.30.1		not-accessible	A conceptual row in the cmL3QosPolicerThresholdTable.
I32 cmL3QosPolicerThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.30.1.1	Integer32	read-only	An index that uniquely identifies an entry in the cmL3QosPolicerThresholdTable.
NUM cmL3QosPolicerThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.30.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM cmL3QosPolicerThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.30.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 cmL3QosPolicerThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.30.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 cmL3QosPolicerThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.30.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 cmL3QosPolicerThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.30.1.6	Counter64	read-only	Monitored value corresponding to cmL3QosPolicerThresholdVariable.
cmL3QosShaperStatsTable	1.3.6.1.4.1.2544.1.12.37.2.31		not-accessible	A collection of L3 flow point Level QOS Shaper statistics. These reflect the current data.
cmL3QosShaperStatsEntry	1.3.6.1.4.1.2544.1.12.37.2.31.1		not-accessible	A conceptual row in the cmL3QosShaperStatsTable. Entries exist in this table for each QOS Shaper per L3 flow point.
I32 cmL3QosShaperStatsIndex	1.3.6.1.4.1.2544.1.12.37.2.31.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry. 1 - 15min 2 - 1day 3 - rollover 4 - 5min
NUM cmL3QosShaperStatsIntervalType	1.3.6.1.4.1.2544.1.12.37.2.31.1.2	CmPmIntervalType	read-only	Interval over which Performance Monitoring data is collected.
T/F cmL3QosShaperStatsValid	1.3.6.1.4.1.2544.1.12.37.2.31.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP cmL3QosShaperStatsAction	1.3.6.1.4.1.2544.1.12.37.2.31.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM cmL3QosShaperStatsBT	1.3.6.1.4.1.2544.1.12.37.2.31.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM cmL3QosShaperStatsBTD	1.3.6.1.4.1.2544.1.12.37.2.31.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM cmL3QosShaperStatsFD	1.3.6.1.4.1.2544.1.12.37.2.31.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM cmL3QosShaperStatsFTD	1.3.6.1.4.1.2544.1.12.37.2.31.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM cmL3QosShaperStatsBR	1.3.6.1.4.1.2544.1.12.37.2.31.1.9	PerfCounter64	read-only	Bytes Replicated.
NUM cmL3QosShaperStatsFR	1.3.6.1.4.1.2544.1.12.37.2.31.1.10	PerfCounter64	read-only	Frames Replicated.
NUM cmL3QosShaperStatsABRRL	1.3.6.1.4.1.2544.1.12.37.2.31.1.11	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM cmL3QosShaperStatsABRRLR	1.3.6.1.4.1.2544.1.12.37.2.31.1.12	PerfCounter64	read-only	Average Bit Rate - Rate Limited, Replicated.
NUM cmL3QosShaperStatsBREDD	1.3.6.1.4.1.2544.1.12.37.2.31.1.13	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM cmL3QosShaperStatsFREDD	1.3.6.1.4.1.2544.1.12.37.2.31.1.14	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
cmL3QosShaperHistoryTable	1.3.6.1.4.1.2544.1.12.37.2.32		not-accessible	A collection of l3 flow point Level QOS Shaper statistics. These reflect the history data.
cmL3QosShaperHistoryEntry	1.3.6.1.4.1.2544.1.12.37.2.32.1		not-accessible	A conceptual row in the cmL3QosShaperHistoryTable. Entries exist in this table for each Shaper per l3 flow point.
I32 cmL3QosShaperHistoryIndex	1.3.6.1.4.1.2544.1.12.37.2.32.1.1	Integer32	read-only	An arbitrary integer index value used to uniquely identify this QOS Shaper statistics entry.
DAT cmL3QosShaperHistoryTime	1.3.6.1.4.1.2544.1.12.37.2.32.1.2	DateAndTime	read-only	Indicates the time of history bin creation.
T/F cmL3QosShaperHistoryValid	1.3.6.1.4.1.2544.1.12.37.2.32.1.3	TruthValue	read-only	Indicates the validity of the bin.
CMP cmL3QosShaperHistoryAction	1.3.6.1.4.1.2544.1.12.37.2.32.1.4	CmPmBinAction	read-write	Allows the Manager to clear the bin.
NUM cmL3QosShaperHistoryBT	1.3.6.1.4.1.2544.1.12.37.2.32.1.5	PerfCounter64	read-only	Bytes Transmitted.
NUM cmL3QosShaperHistoryBTD	1.3.6.1.4.1.2544.1.12.37.2.32.1.6	PerfCounter64	read-only	Bytes Tail Dropped.
NUM cmL3QosShaperHistoryFD	1.3.6.1.4.1.2544.1.12.37.2.32.1.7	PerfCounter64	read-only	Frames Dequeued.
NUM cmL3QosShaperHistoryFTD	1.3.6.1.4.1.2544.1.12.37.2.32.1.8	PerfCounter64	read-only	Frames Tail Dropped.
NUM cmL3QosShaperHistoryBR	1.3.6.1.4.1.2544.1.12.37.2.32.1.9	PerfCounter64	read-only	Bytes Replicated.
NUM cmL3QosShaperHistoryFR	1.3.6.1.4.1.2544.1.12.37.2.32.1.10	PerfCounter64	read-only	Frames Replicated.
NUM cmL3QosShaperHistoryABRRL	1.3.6.1.4.1.2544.1.12.37.2.32.1.11	PerfCounter64	read-only	Average Bit Rate - Rate Limited.
NUM cmL3QosShaperHistoryABRRLR	1.3.6.1.4.1.2544.1.12.37.2.32.1.12	PerfCounter64	read-only	Average Bit Rate - Rate Limited, Replicated.
NUM cmL3QosShaperHistoryBREDD	1.3.6.1.4.1.2544.1.12.37.2.32.1.13	PerfCounter64	read-only	Bytes Random Early Discard, Dropped.
NUM cmL3QosShaperHistoryFREDD	1.3.6.1.4.1.2544.1.12.37.2.32.1.14	PerfCounter64	read-only	Frames Random Early Discard, Dropped.
cmL3QosShaperThresholdTable	1.3.6.1.4.1.2544.1.12.37.2.33		not-accessible	A table of entries that allow manageability of QOS Shaper Thresholds.
cmL3QosShaperThresholdEntry	1.3.6.1.4.1.2544.1.12.37.2.33.1		not-accessible	A conceptual row in the cmL3QosShaperThresholdTable.
I32 cmL3QosShaperThresholdIndex	1.3.6.1.4.1.2544.1.12.37.2.33.1.1	Integer32	read-only	An index that uniquely identifies an entry in the cmL3QosShaperThresholdTable.
NUM cmL3QosShaperThresholdInterval	1.3.6.1.4.1.2544.1.12.37.2.33.1.2	CmPmIntervalType	read-only	The interval over which monitored value is sampled and compared with the specified threshold.
NUM cmL3QosShaperThresholdVariable	1.3.6.1.4.1.2544.1.12.37.2.33.1.3	VariablePointer	read-only	The object identifier of the particular variable to be sampled.
U32 cmL3QosShaperThresholdValueLo	1.3.6.1.4.1.2544.1.12.37.2.33.1.4	Unsigned32	read-write	Lower 32 bits of the threshold value.
U32 cmL3QosShaperThresholdValueHi	1.3.6.1.4.1.2544.1.12.37.2.33.1.5	Unsigned32	read-write	Higher 32 bits of the threshold value.
C64 cmL3QosShaperThresholdMonValue	1.3.6.1.4.1.2544.1.12.37.2.33.1.6	Counter64	read-only	Monitored value corresponding to cmL3QosShaperThresholdVariable.
f3L3Notifications	1.3.6.1.4.1.2544.1.12.37.3
NTF f3L3FlowPointThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.1			This trap is sent each time a threshold on a PM condition on an L3 flow point is crossed.
NTF f3L3QosPolicerThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.2			This trap is sent each time a threshold on a PM condition on an L3 Qos Policer is crossed.
NTF f3L3QosShaperThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.3			This trap is sent each time a threshold on a PM condition on an L3 Qos Shaper is crossed.
NTF f3L3TrafficIpInterfaceThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.4			This trap is sent each time a threshold on a PM condition on an L3 traffic ip interface is crossed.
NTF f3L3AclRuleThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.5			This trap is sent each time a threshold on a PM condition on an L3 acl rule is crossed.
NTF f3L2A2NAclRuleThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.6			This trap is sent each time a threshold on a PM condition on an L2 A2N acl rule is crossed.
NTF f3L2N2AAclRuleThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.7			This trap is sent each time a threshold on a PM condition on an L2 N2A acl rule is crossed.
NTF f3L3TrafficIPv6InterfaceThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.3.8			This trap is sent each time a threshold on a PM condition on an L3 traffic ipv6 interface is crossed.
f3L3Conformance	1.3.6.1.4.1.2544.1.12.37.4
f3L3Compliances	1.3.6.1.4.1.2544.1.12.37.4.1
f3L3Compliance	1.3.6.1.4.1.2544.1.12.37.4.1.1			Describes the requirements for conformance to the L3.
f3L3Groups	1.3.6.1.4.1.2544.1.12.37.4.2
f3L3ObjectsGroup	1.3.6.1.4.1.2544.1.12.37.4.2.1			A collection of objects used to manage the L3 functionality.
f3L3PerfGroup	1.3.6.1.4.1.2544.1.12.37.4.2.2			A collection of objects performance used to manage the L3 functionality.
f3L3TrafficOspfGroup	1.3.6.1.4.1.2544.1.12.37.4.2.3			A collection of objects used to manage the L3 Ospf functionality.
f3L3TrafficIPv6Group	1.3.6.1.4.1.2544.1.12.37.4.2.4			A collection of objects used to manage the traffic ipv6 functionality.
f3L3TrafficBgpGroup	1.3.6.1.4.1.2544.1.12.37.4.2.5			A collection of objects used to manage the traffic BGP functionality.
cmL3Notifications	1.3.6.1.4.1.2544.1.12.37.5
NTF cmL3FlowPointThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.5.9			This trap is sent each time a threshold on a PM condition on an L3 flow point is crossed.
NTF cmL3QosPolicerThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.5.10			This trap is sent each time a threshold on a PM condition on an L3 Qos Policer is crossed.
NTF cmL3QosShaperThresholdCrossingAlert	1.3.6.1.4.1.2544.1.12.37.5.11			This trap is sent each time a threshold on a PM condition on an L3 Qos Shaper is crossed.

RFC description

F3 Layer 3 MIB for L3 network management on F3 systems like FSP150CM/CC products. Defines SNMP management objects for Layer 3 routing and switching functions.

Start monitoring ADVA Optical Networking FSP150CM/CC (F3 platform) carrier Ethernet device (DHCP relay/VRF Layer 3) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download F3-L3-MIB

What Is F3-L3-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description