All MIBs › CISCOSB-IpRouter
Organization: Cisco Small Business
Last Updated: 2004-06-01
Category: Technology: Routing, Vendor: Cisco
Description: Configures and monitors IP routing functions and static routes on Cisco Small Business devices.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCOSB-IpRouter?
CISCOSB-IpRouter is a Cisco Small Business (Radlan-based firmware) proprietary MIB (built on the standard OSPF-MIB/RIPv2-MIB) configuring RIPv2 and IP redundancy on Cisco Small Business routers/switches. Its RIPv2 interface-configuration table, keyed by address, records virtual-link flag, key chain, admin status, inbound/outbound filter type and list name, and default-information-originate flag, alongside global RIPv2 MIB version, redistribution defaults/metrics, a clear-statistics action, passive-interface setting, and connected-route redistribution, and an IP-redundancy table (admin/operational status, router table with interface address). As a configuration/status MIB it lets an administrator confirm RIPv2 route filtering and IP redundancy (VRRP-style) status on a Cisco Small Business router. It is deployed on Cisco Small Business routers/switches. Engineers can download the CISCOSB-IpRouter file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCOSB-IpRouter. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Small Business routers/switches
Monitoring Examples
An administrator checks rlRip2IfConfInFilterListName and ipRedundOperStatus to confirm RIPv2 route filtering and IP redundancy status on a Cisco Small Business router.
What Can Be Monitored
- RIPv2 route filtering and IP redundancy status
This MIB depends on
Related MIBs
Imported Objects
From CISCOSB-IP
| ipRedundancy | OBJECT-IDENTITY |
| ipRipFilter | OBJECT-IDENTITY |
| ipRouteLeaking | OBJECT-IDENTITY |
| ipSpec | MODULE-IDENTITY |
| rip2Spec | OBJECT-IDENTITY |
| rlIpRoutingProtPreference | OBJECT-IDENTITY |
| rlOspf | OBJECT-IDENTITY |
From OSPF-MIB
| AreaID | |
| RouterID | |
| ospfIfEntry | |
| ospfVirtIfEntry |
From RIPv2-MIB
| rip2IfConfEntry | OBJECT-TYPE |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| INT ipLeakExtDirectToOspf | 1.3.6.1.4.1.9.6.1.101.26.7.5 | INTEGER | read-write | This parameter controls leaking (redistribution) into OSPF of direct routes external to OSPF, i.e. routes to local network corresponding to IP interfaces on which OSPF is disabled. When enabled, all such direct routes are advertised into OSPF as external routes. |
| INT ipLeakOspfToRip | 1.3.6.1.4.1.9.6.1.101.26.7.3 | INTEGER | read-write | This parameter controls leaking (redistribution) of routes from OSPF to RIP. If enabled, all routes learned via OSPF are advertised into RIP. |
| INT ipLeakRipToOspf | 1.3.6.1.4.1.9.6.1.101.26.7.4 | INTEGER | read-write | This parameter controls leaking (redistribution) of routes from RIP to OSPF. If enabled, all routes learned via RIP are advertised into OSPF as external routes. |
| INT ipLeakStaticToOspf | 1.3.6.1.4.1.9.6.1.101.26.7.2 | INTEGER | read-write | This parameter controls leaking (redistribution) of static routes into OSPF. When enabled, all routes inserted to the IP routing table via SNMP are advertised into OSPF as external routes. |
| INT ipLeakStaticToRip | 1.3.6.1.4.1.9.6.1.101.26.7.1 | INTEGER | read-write | This parameter controls leaking (redistribution) of static routes to RIP. When enabled, all routes inserted to the IP routing table via SNMP are advertised into RIP. |
| INT ipRedundAdminStatus | 1.3.6.1.4.1.9.6.1.101.26.6.1 | INTEGER | read-write | This parameter controls the IP Redundancy in the device. In case the parameter is Enable and the other router becomes inoperational, all the traffic is handled by this element. |
| INT ipRedundOperStatus | 1.3.6.1.4.1.9.6.1.101.26.6.2 | INTEGER | read-only | obsolete |
| ipRedundRoutersEntry | 1.3.6.1.4.1.9.6.1.101.26.6.3.1 | not-accessible | The row definition for this table. | |
| IP ipRedundRoutersIfAddr | 1.3.6.1.4.1.9.6.1.101.26.6.3.1.1 | IpAddress | read-only | The Ip address of the IP interface on which the redundancy feature is operational. |
| IP ipRedundRoutersMainRouterAddr | 1.3.6.1.4.1.9.6.1.101.26.6.3.1.2 | IpAddress | read-only | The Ip address of the polled main router. |
| INT ipRedundRoutersOperStatus | 1.3.6.1.4.1.9.6.1.101.26.6.3.1.3 | INTEGER | read-only | If active, the main router is considered inoperational and the IP interface operates as its backup. |
| INT ipRedundRoutersPollInterval | 1.3.6.1.4.1.9.6.1.101.26.6.3.1.4 | INTEGER | read-write | Polling interval for this router (in seconds). If 0 the router is not polled. |
| INT ipRedundRoutersStatus | 1.3.6.1.4.1.9.6.1.101.26.6.3.1.6 | INTEGER | read-write | Entry status |
| ipRedundRoutersTable | 1.3.6.1.4.1.9.6.1.101.26.6.3 | not-accessible | List of IP addresses backed up by this router. | |
| INT ipRedundRoutersTimeout | 1.3.6.1.4.1.9.6.1.101.26.6.3.1.5 | INTEGER | read-write | Interval in seconds during which the backed-up router must signal. If it does not signal, it is considered inoperational and the IP interface starts operating as backup. |
| rlIpRouter | 1.3.6.1.4.1.9.6.1.101.26.18 | The private MIB module definition for switch001 router MIB. | ||
| INT rlIpRoutingProtPreferenceBgp | 1.3.6.1.4.1.9.6.1.101.26.13.8 | INTEGER | read-write | The Preference given to routes whose origin is BGP ROUTERS (EBGP or IBGP) |
| INT rlIpRoutingProtPreferenceDirect | 1.3.6.1.4.1.9.6.1.101.26.13.1 | INTEGER | read-write | The Preference given to routes whose origin is Local IP (i.e. IP interface in IpAddrTable) It is proposed that the value will be higher than dynamic routing protocols. The change of its value may lead to unexpected results, such as routing loops |
| INT rlIpRoutingProtPreferenceOspfExt | 1.3.6.1.4.1.9.6.1.101.26.13.4 | INTEGER | read-write | The Preference given to routes whose origin is external to OSPF i.e. routes imported by as OSPF AS Border router. Relate to routes which are based on OSPF Link State Advertisements of types 5 and 7 |
| INT rlIpRoutingProtPreferenceOspfInter | 1.3.6.1.4.1.9.6.1.101.26.13.3 | INTEGER | read-write | The Preference given to routes whose origin is internal ospf Links. Relate to routes which are based on OSPF Link State Advertisements of type 1-4 |
| INT rlIpRoutingProtPreferenceOspfReject | 1.3.6.1.4.1.9.6.1.101.26.13.5 | INTEGER | read-write | The Preference given to routes whose origin is OSPF and Are inserted to cover gaps in net range |
| INT rlIpRoutingProtPreferenceRipAggregate | 1.3.6.1.4.1.9.6.1.101.26.13.7 | INTEGER | read-write | The Preference given to routes whose origin is aggregation As a method of rip1 to handle the CIDR schema. The idea is that ripv1 aggregates route which fall into certion class of IP. This route is a discard route in effect, and is referenced, at forwarding route look up, if there is no beter match. (which means the route is not available) |
| INT rlIpRoutingProtPreferenceRipNormal | 1.3.6.1.4.1.9.6.1.101.26.13.6 | INTEGER | read-write | The Preference given to routes whose origin is RIP routing domain |
| INT rlIpRoutingProtPreferenceStatic | 1.3.6.1.4.1.9.6.1.101.26.13.2 | INTEGER | read-write | The Preference given to routes whose origin is Men configured by Net managment tools, i.e. Command line or SNMP configured. |
| I32 rlOspfAsbLnkAge | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.5 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| ARE rlOspfAsbLnkAreaId | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.1 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| I32 rlOspfAsbLnkChecksum | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.6 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| rlOspfAsbLnkEntry | 1.3.6.1.4.1.9.6.1.101.26.14.7.1 | not-accessible | A single entry from Summary LSA. | |
| U32 rlOspfAsbLnkLength | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.7 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| IP rlOspfAsbLnkLsid | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.2 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| U32 rlOspfAsbLnkMetric | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.8 | Unsigned32 | read-only | The cost of using this router link. |
| ROU rlOspfAsbLnkRouterId | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.3 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfAsbLnkSequence | 1.3.6.1.4.1.9.6.1.101.26.14.7.1.4 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| rlOspfAsbLnkTable | 1.3.6.1.4.1.9.6.1.101.26.14.7 | not-accessible | Summary Link State Advertisement for ASBR (Type 4). | |
| I32 rlOspfAseLnkAge | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.4 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| INT rlOspfAseLnkBitE | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.9 | INTEGER | read-only | The type of external metric. If bit E is set, the metric specified is a Type 2 external metric. |
| I32 rlOspfAseLnkChecksum | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.5 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| rlOspfAseLnkEntry | 1.3.6.1.4.1.9.6.1.101.26.14.8.1 | not-accessible | A single entry from External LSA. | |
| IP rlOspfAseLnkFrwAddress | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.8 | IpAddress | read-only | Data traffic for the advertised destination will be forwarded to this address. If the Forwarding address is set to 0.0.0.0, data traffic will be forwarded instead to the LSA's originator (i.e., the responsible AS boundary router). |
| U32 rlOspfAseLnkLength | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.6 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| IP rlOspfAseLnkLsid | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.1 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| IP rlOspfAseLnkMask | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.7 | IpAddress | read-only | Value depends on the link's Type field. |
| U32 rlOspfAseLnkMetric | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.10 | Unsigned32 | read-only | The cost of this route. |
| ROU rlOspfAseLnkRouterId | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.2 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfAseLnkSequence | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.3 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| rlOspfAseLnkTable | 1.3.6.1.4.1.9.6.1.101.26.14.8 | not-accessible | External Link State Advertisement. | |
| U32 rlOspfAseLnkTag | 1.3.6.1.4.1.9.6.1.101.26.14.8.1.11 | Unsigned32 | read-only | A 32-bit field attached to each external route. |
| INT rlOspfAutoInterfaceCreation | 1.3.6.1.4.1.9.6.1.101.26.14.2 | INTEGER | read-only | This variable controls OSPF automatic creation and activation of interfaces. If value is enable - IP interface creation results in creation and activation of OSPF Interface. If value is disable OSPF interface is created but not activated. The option is a platform parameter. |
| rlOspfIfExtEntry | 1.3.6.1.4.1.9.6.1.101.26.14.3.1 | not-accessible | The OSPF interface table extension for md5 authentication | |
| rlOspfIfExtTable | 1.3.6.1.4.1.9.6.1.101.26.14.3 | not-accessible | The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | |
| STR rlOspfifKeyChain | 1.3.6.1.4.1.9.6.1.101.26.14.3.1.1 | DisplayString | read-write | Name of the key-chain which ospf interface uses for md5 authentication |
| INT rlOspfMibVersion | 1.3.6.1.4.1.9.6.1.101.26.14.1 | INTEGER | read-only | MIB's version, the current version is 1. |
| I32 rlOspfNetLnkAge | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| ARE rlOspfNetLnkAreaId | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.1 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| IP rlOspfNetLnkAttRouter | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.10 | IpAddress | read-only | The Router IDs of each of the routers attached to the network. |
| I32 rlOspfNetLnkChecksum | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| rlOspfNetLnkEntry | 1.3.6.1.4.1.9.6.1.101.26.14.5.1 | not-accessible | A single entry from Network LSA. | |
| U32 rlOspfNetLnkIdx | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.4 | Unsigned32 | read-only | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. |
| U32 rlOspfNetLnkLength | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.8 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| IP rlOspfNetLnkLsid | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.2 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| IP rlOspfNetLnkMask | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.9 | IpAddress | read-only | The IP address mask for the network. |
| ROU rlOspfNetLnkRouterId | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.3 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfNetLnkSequence | 1.3.6.1.4.1.9.6.1.101.26.14.5.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| rlOspfNetLnkTable | 1.3.6.1.4.1.9.6.1.101.26.14.5 | not-accessible | Network Link State Advertisement. | |
| I32 rlOspfRtrLnkAge | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.6 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| ARE rlOspfRtrLnkAreaId | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.1 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| INT rlOspfRtrLnkBitB | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.11 | INTEGER | read-only | When set, the router is an area border router (B is for border). |
| INT rlOspfRtrLnkBitE | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.10 | INTEGER | read-only | When set, the router is an AS boundary router (E is for external). |
| INT rlOspfRtrLnkBitV | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.9 | INTEGER | read-only | When set, the router is an endpoint of one or more fully adjacent virtual links having the described area as Transit area (V is for virtual link endpoint). |
| I32 rlOspfRtrLnkChecksum | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.7 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| rlOspfRtrLnkEntry | 1.3.6.1.4.1.9.6.1.101.26.14.4.1 | not-accessible | A single entry from Router LSA. | |
| U32 rlOspfRtrLnkIdx | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.4 | Unsigned32 | read-only | The index is a unsigned 32-bit integer. It is used as sequence number of entry in the LSA and relevant only for Router or Network LSA which can contain unlimited number of entries. |
| U32 rlOspfRtrLnkLength | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.8 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| IP rlOspfRtrLnkLinkData | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.14 | IpAddress | read-only | Value depends on the link's Type field. |
| IP rlOspfRtrLnkLinkID | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.13 | IpAddress | read-only | Identifies the object that this router link connects to. Value depends on the link's Type. |
| U32 rlOspfRtrLnkLinks | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.12 | Unsigned32 | read-only | The number of router links described in this LSA. This must be the total collection of router links (i.e., interfaces) to the area. |
| IP rlOspfRtrLnkLsid | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.2 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| U32 rlOspfRtrLnkMetric | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.16 | Unsigned32 | read-only | The cost of using this router link. |
| ROU rlOspfRtrLnkRouterId | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.3 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfRtrLnkSequence | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.5 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| rlOspfRtrLnkTable | 1.3.6.1.4.1.9.6.1.101.26.14.4 | not-accessible | Router Link State Advertisement. | |
| INT rlOspfRtrLnkType | 1.3.6.1.4.1.9.6.1.101.26.14.4.1.15 | INTEGER | read-only | A quick description of the router link. |
| I32 rlOspfSumLnkAge | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.5 | Integer32 | read-only | This field is the age of the link state advertisement in seconds. |
| ARE rlOspfSumLnkAreaId | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.1 | AreaID | read-only | The 32 bit identifier of the Area from which the LSA was received. |
| I32 rlOspfSumLnkChecksum | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.6 | Integer32 | read-only | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum. |
| rlOspfSumLnkEntry | 1.3.6.1.4.1.9.6.1.101.26.14.6.1 | not-accessible | A single entry from Summary LSA. | |
| U32 rlOspfSumLnkLength | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.7 | Unsigned32 | read-only | The lenth in bytes of the LSA. This includes the 20 byte LSA header. |
| IP rlOspfSumLnkLsid | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.2 | IpAddress | read-only | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. |
| IP rlOspfSumLnkMask | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.8 | IpAddress | read-only | Value depends on the link's Type field. |
| U32 rlOspfSumLnkMetric | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.9 | Unsigned32 | read-only | The cost of using this router link. |
| ROU rlOspfSumLnkRouterId | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.3 | RouterID | read-only | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| I32 rlOspfSumLnkSequence | 1.3.6.1.4.1.9.6.1.101.26.14.6.1.4 | Integer32 | read-only | The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. |
| rlOspfSumLnkTable | 1.3.6.1.4.1.9.6.1.101.26.14.6 | not-accessible | Summary Link State Advertisement for network (Type 3). | |
| rlospfVirtIfExtEntry | 1.3.6.1.4.1.9.6.1.101.26.14.9.1 | not-accessible | The OSPF virtual interface table extension for md5 authentication | |
| rlospfVirtIfExtTable | 1.3.6.1.4.1.9.6.1.101.26.14.9 | not-accessible | The Virtual Interface Table describes the virtual links that the OSPF Process is configured to carry on. | |
| STR rlospfVirtifKeyChain | 1.3.6.1.4.1.9.6.1.101.26.14.9.1.1 | DisplayString | read-write | Name of the key-chain which ospf virtual interface uses for md5 authentication |
| T/F rlRip2ClearStatistics | 1.3.6.1.4.1.9.6.1.101.26.3.5 | TruthValue | read-write | Clears RIP statistics counters of all interfaces and all peers. |
| INT rlRip2GlobalDefInfOriginate | 1.3.6.1.4.1.9.6.1.101.26.3.7 | INTEGER | read-write | if set to Enabled RIP will advertise default route on all RIP interfaces if set to PassiveOnly RIP will advertise default route on all RIP passive interfaces |
| INT rlRip2IfConfAdminStatus | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.4 | INTEGER | read-write | This variable defines administrative status of RIP interface. |
| INT rlRip2IfConfDefInfOriginate | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.9 | INTEGER | read-write | if set to global RIP behavior is specified by the value of rlRip2GlobalDefaultInformationOriginate scalar if set to enabled RIP will advertise default route on this interfaces if set to passiveOnly RIP will advertise default route on this interfaces only if it is configured to passive mode |
| T/F rlRip2IfConfGlobalPassiveInterface | 1.3.6.1.4.1.9.6.1.101.26.3.6 | TruthValue | read-write | if set to TRUE all interfaces created will be created as passive (rip2IfConfSend = doNotSend) |
| INT rlRip2IfConfInFilteringType | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.5 | INTEGER | read-write | Type of Rx filtering (ACL, Prefix List etc). |
| STR rlRip2IfConfInFilterListName | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.7 | DisplayString | read-write | Name of a filtering list. The list defines which networks are to be received and which are to be suppressed in routing updates. List type is defined by rlRip2IfConfFilteringType. |
| STR rlRip2IfConfKeyChain | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.3 | DisplayString | read-write | Name of the key-chain which rip2 interface uses for md5 authentication |
| INT rlRip2IfConfOutFilteringType | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.6 | INTEGER | read-write | Type of Tx filtering (ACL, Prefix List etc). |
| STR rlRip2IfConfOutFilterListName | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.8 | DisplayString | read-write | Name of a filtering list. The list defines which networks are to be sent and which are to be suppressed. List type is defined by rlRip2IfConfFilteringType. |
| INT rlRip2MibVersion | 1.3.6.1.4.1.9.6.1.101.26.3.2 | INTEGER | read-only | MIB's version, the current version is 2. |
| T/F rlRip2RedistConnected | 1.3.6.1.4.1.9.6.1.101.26.3.8 | TruthValue | read-write | If set to TRUE causes RIP to redistribute directly connected interfaces, on which RIP is not enabled. |
| U32 rlRip2RedistConnectedMetric | 1.3.6.1.4.1.9.6.1.101.26.3.10 | Unsigned32 | read-write | User defined metric value when RIP advertises directly connected interfaces, on which RIP is not enabled. |
| T/F rlRip2RedistConnectedTransparent | 1.3.6.1.4.1.9.6.1.101.26.3.9 | TruthValue | read-write | If set to TRUE causes RIP to use the routing table metric for redistributed connected routes as the RIP metric. If set to FALSE then the metric defined in rlRip2RedistDefaultMetric is used. |
| U32 rlRip2RedistDefaultMetric | 1.3.6.1.4.1.9.6.1.101.26.3.3 | Unsigned32 | read-write | Default metric value when RIP advertises routes, derived by other protocols. |
| T/F rlRip2RedistStaticTransparent | 1.3.6.1.4.1.9.6.1.101.26.3.4 | TruthValue | read-write | If set to TRUE causes RIP to use the routing table metric for redistributed static routes as the RIP metric. If set to FALSE then the metric defined in rlRip2RedistDefaultMetric is used. |
| INT rsIpRipFilterGlbAction | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.7 | INTEGER | read-write | Filter action - permit/deny for this network |
| rsIpRipFilterGlbEntry | 1.3.6.1.4.1.9.6.1.101.26.8.1.1 | not-accessible | An entry in the RIP global filter table | |
| IP rsIpRipFilterGlbIpAddr | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.4 | IpAddress | read-write | network prefix IP address, as in the forwarding table. |
| INT rsIpRipFilterGlbMatchBits | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.6 | INTEGER | read-write | the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterGlbNetworkMaskBits must be 0 and is ignored. |
| INT rsIpRipFilterGlbNetworkMaskBits | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.5 | INTEGER | read-write | the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 |
| INT rsIpRipFilterGlbNumber | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.2 | INTEGER | read-only | Number of RIP filter. |
| INT rsIpRipFilterGlbStatus | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.3 | INTEGER | read-write | The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. |
| rsIpRipFilterGlbTable | 1.3.6.1.4.1.9.6.1.101.26.8.1 | not-accessible | The table of RIP global filters per IP router. | |
| INT rsIpRipFilterGlbType | 1.3.6.1.4.1.9.6.1.101.26.8.1.1.1 | INTEGER | read-only | Type of filter - input/output |
| INT rsIpRipFilterLclAction | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.8 | INTEGER | read-write | Filter action - permit/deny |
| rsIpRipFilterLclEntry | 1.3.6.1.4.1.9.6.1.101.26.8.2.1 | not-accessible | An entry in the Intf RIP filter table | |
| IP rsIpRipFilterLclIpAddr | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.5 | IpAddress | read-write | network prefix IP address, as in the forwarding table. |
| IP rsIpRipFilterLclIpIntf | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.1 | IpAddress | read-only | The IP address identifying the RIP interface for this filter. This value corresponds to rsIpAdEntAddr. |
| INT rsIpRipFilterLclMatchBits | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.7 | INTEGER | read-write | the number of bits to match in the Network IP address. A value smaller than 32 defines a wildcard. for example: the value 8 means all routes whose leftmost 8 bits are equal to those of the network IP address. If this variable has a value other than 32, than rsIpRipFilterLclNetworkMaskBits must be 0 and is ignored. |
| INT rsIpRipFilterLclNetworkMaskBits | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.6 | INTEGER | read-write | the number of bits in the IP Network mask, called network-prefix-length in Router Requirements terminology. for example: the value 16 means mask 255.255.0.0 |
| INT rsIpRipFilterLclNumber | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.3 | INTEGER | read-only | Number of RIP filter for this Interface |
| INT rsIpRipFilterLclStatus | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.4 | INTEGER | read-write | The validity of this entry. Setting this value to invalid deletes the entry, and the entry may be actualy removed from the table. |
| rsIpRipFilterLclTable | 1.3.6.1.4.1.9.6.1.101.26.8.2 | not-accessible | Table of input/output RIP filters used per IP Interface. | |
| INT rsIpRipFilterLclType | 1.3.6.1.4.1.9.6.1.101.26.8.2.1.2 | INTEGER | read-only | Type of filter - input/output |
| IP rsRip2IfConfAddress | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.1 | IpAddress | read-only | The IP Address of this system on the indicated subnet. |
| rsRip2IfConfEntry | 1.3.6.1.4.1.9.6.1.101.26.3.1.1 | not-accessible | The row definition for this table. | |
| rsRip2IfConfTable | 1.3.6.1.4.1.9.6.1.101.26.3.1 | not-accessible | This table is extension of rip2IfConfTable (RFC 1724 ,RIP 2) | |
| INT rsRip2IfConfVirtualDis | 1.3.6.1.4.1.9.6.1.101.26.3.1.1.2 | INTEGER | read-write | This variable defines the virtual number of hops assigned to the interface specified by rsIfIpAddrIndex. This enables fine-tuning of the RIP routing algorithm. |
RFC description
Cisco Small Business IP Router extension MIB for RIP v2 and OSPF routing protocol configuration and management.
Start monitoring Cisco Small Business routers/switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.