All MIBs › ELTEX-IP-OSPF-IF-MIB
Category: Protocol: OSPF, Technology: Routing, Vendor: Eltex
Description: Eltex OSPF interface MIB providing per-interface OSPF configuration and state monitoring on Eltex routing platforms.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ELTEX-IP-OSPF-IF-MIB?
ELTEX-IP-OSPF-IF-MIB is a vendor-specific MIB from Eltex, a manufacturer of telecom access and routing equipment, providing per-interface OSPF (Open Shortest Path First) routing protocol configuration and state on Eltex routing platforms. It exposes OSPF interface-level settings such as interface address, passive-interface configuration, and interface administrative/operational status. This is primarily a routing-software status MIB: it lets an administrator confirm which interfaces are participating in OSPF, verify passive-interface lists (interfaces excluded from forming OSPF adjacencies), and check whether an OSPF interface is enabled/operational, which helps detect routing misconfigurations or adjacency failures. It is a vendor extension that complements the standard OSPF-MIB (RFC 1850/4750), adding Eltex-specific passive-interface controls not covered by the IETF MIB. It is typically deployed on Eltex routers/switches running OSPF within an enterprise or carrier IP network. Network engineers evaluating or troubleshooting this functionality can download the ELTEX-IP-OSPF-IF-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ELTEX-IP-OSPF-IF-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Eltex router/switch
Monitoring Examples
An administrator would poll eltIpOspfIfTable/eltIpOspfIfEntry to enumerate OSPF-enabled interfaces, checking eltOspfIfAddress and eltOspfIfStatus to confirm each interface is up and correctly addressed for OSPF. Reviewing eltOspfIfPassiveDefault and eltOspfIfPassiveList would reveal whether an interface unexpectedly suppresses OSPF hello packets, explaining a missing adjacency or route that should otherwise be visible in the routing table.
What Can Be Monitored
- OSPF interface address
- OSPF interface status
- passive-interface default setting
- passive-interface list
Imported Objects
From ELTEX-MES
| eltMes | MODULE-IDENTITY |
From ELTEX-MES-IP
| eltMesOspf | OBJECT-IDENTITY |
From Q-BRIDGE-MIB
| PortList |
From SNMPv2-SMI
| IpAddress | |
| OBJECT-TYPE |
From SNMPv2-TC
| RowStatus | |
| TruthValue |
OIDs
RFC description
Manages OSPF interface configuration on Eltex MES switches, including passive interface settings and routing parameters.
Start monitoring Eltex router/switch (per-interface OSPF config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.