ME1200-IP-MIB

All MIBs › ME1200-IP-MIB

Organization: Cisco Systems, Inc

Last Updated: 2014-10-21

Category: Technology: Routing, Vendor: Cisco

Description: Cisco ME1200 Metro Ethernet switch MIB defining IP interface, routing, and address management objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ME1200-IP-MIB?

This is a Cisco-specific private MIB for the Cisco ME 1200 Metro Ethernet access switch, defining IP-layer capability, configuration, and interface objects for the device's routing and IP addressing functions. It exposes a capabilities branch describing what IPv4/IPv6 host and unicast routing features (including hardware-accelerated routing) the platform supports and its scaling limits (max IP interfaces, max static routes, LPM hardware table entries), alongside a configuration branch for enabling routing globally and managing IPv6 interface tables. Its relevance to monitoring is centered on software/configuration status: an operator can confirm whether IP unicast routing (and hardware-assisted routing) is actually enabled via me1200IpConfigGlobalsMainEnableRouting, check IPv6 interface configuration state via me1200IpConfigInterfacesIpv6Table, and verify the device isn't approaching its documented static-route or hardware LPM table capacity limits, which would manifest as routing failures if exceeded. It is a private extension MIB layered on Cisco's ME1200 platform architecture and would typically be used alongside standard IP-MIB/IF-MIB objects for full IP interface visibility. It is typically deployed on Cisco ME 1200 Metro Ethernet switches in service-provider access networks where operators need to verify IP routing capability and interface configuration for the device's Layer 3 features. Engineers can download the ME1200-IP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ME1200-IP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco ME 1200 Metro Ethernet access switch

Monitoring Examples

An administrator would check me1200IpCapabilitiesHasIpv4UnicastHwRoutingCapabilities and me1200IpCapabilitiesMaxNumberOfStaticRoutes to understand the device's Layer 3 feature ceiling, then poll me1200IpConfigGlobalsMainEnableRouting to confirm IP routing is actually turned on and me1200IpConfigInterfacesIpv6Table/Entry to review configured IPv6 interfaces. If the number of configured static routes approaches me1200IpCapabilitiesMaxNumberOfStaticRoutes or me1200IpCapabilitiesNumberOfLpmHardwareEntries, that signals the switch is nearing its hardware routing table capacity and new routes could fail to install in hardware.

What Can Be Monitored

IPv4/IPv6 routing capability flags
max static routes and LPM hardware table capacity
global IP routing enable/disable state
IPv6 interface configuration

Imported Objects

From CISCOME1200-MIB

me1200SwitchMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddressIPv6

From ME1200-TC

ME1200InterfaceIndex
ME1200RowEditorState
ME1200Unsigned8

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using me1200IpStatisticsGlobalsIpv4HCInReceives OID:

Select a Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type me1200IpStatisticsGlobalsIpv4HCInReceives into the Find box to locate it in the OID tree, then select it and click OK. The total number of input IP datagrams received, including those received in error. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
me1200IpMIB	1.3.6.1.4.1.9.9.815.1.102			Private IP MIB.
me1200IpMIBObjects	1.3.6.1.4.1.9.9.815.1.102.1
me1200IpCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1
T/F me1200IpCapabilitiesHasIpv4HostCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1.1	TruthValue	read-only	The device has IPv4 host capabilities for management.
T/F me1200IpCapabilitiesHasIpv6HostCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1.2	TruthValue	read-only	The device has IPv6 host capabilities for management.
T/F me1200IpCapabilitiesHasIpv4UnicastRoutingCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1.3	TruthValue	read-only	The device has IPv4 unicast routing capabilities.
T/F me1200IpCapabilitiesHasIpv4UnicastHwRoutingCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1.4	TruthValue	read-only	The device has IPv4 unicast hardware accelerated routing capabilities.
T/F me1200IpCapabilitiesHasIpv6UnicastRoutingCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1.5	TruthValue	read-only	The device has IPv6 unicast routing capabilities.
T/F me1200IpCapabilitiesHasIpv6UnicastHwRoutingCapabilities	1.3.6.1.4.1.9.9.815.1.102.1.1.6	TruthValue	read-only	The device has IPv6 unicast hardware accelerated routing capabilities.
U32 me1200IpCapabilitiesMaxNumberOfIpInterfaces	1.3.6.1.4.1.9.9.815.1.102.1.1.7	Unsigned32	read-only	The maximum number of IP interfaces supported by the device.
U32 me1200IpCapabilitiesMaxNumberOfStaticRoutes	1.3.6.1.4.1.9.9.815.1.102.1.1.8	Unsigned32	read-only	The maximum number of static configured IP routes (shared for IPv4 and IPv6)
U32 me1200IpCapabilitiesNumberOfLpmHardwareEntries	1.3.6.1.4.1.9.9.815.1.102.1.1.9	Unsigned32	read-only	The amount of hardware LPM (longest prefix match) entries.
me1200IpConfig	1.3.6.1.4.1.9.9.815.1.102.1.2
me1200IpConfigGlobals	1.3.6.1.4.1.9.9.815.1.102.1.2.1
me1200IpConfigGlobalsMain	1.3.6.1.4.1.9.9.815.1.102.1.2.1.1
T/F me1200IpConfigGlobalsMainEnableRouting	1.3.6.1.4.1.9.9.815.1.102.1.2.1.1.1	TruthValue	read-write	Enable routing
me1200IpConfigInterfacesIpv6Table	1.3.6.1.4.1.9.9.815.1.102.1.2.1.4		not-accessible	IPv6 interface configuration table. This table allows IPv6 related configuration of the corresponding IP interface.
me1200IpConfigInterfacesIpv6Entry	1.3.6.1.4.1.9.9.815.1.102.1.2.1.4.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpConfigInterfacesIpv6IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.2.1.4.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
T/F me1200IpConfigInterfacesIpv6Active	1.3.6.1.4.1.9.9.815.1.102.1.2.1.4.1.2	TruthValue	read-write	Enable the static configured IPv6 address. The static configured IPv6 address can only be configured if a valid address has been written into 'ipv6Address' and 'prefixSize'.
ADR me1200IpConfigInterfacesIpv6Ipv6Address	1.3.6.1.4.1.9.9.815.1.102.1.2.1.4.1.3	InetAddressIPv6	read-write	Static configured IPv6 address.
U32 me1200IpConfigInterfacesIpv6PrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.2.1.4.1.4	Unsigned32	read-write	Prefix size of the network.
me1200IpConfigInterfaces	1.3.6.1.4.1.9.9.815.1.102.1.2.2
me1200IpConfigInterfacesTable	1.3.6.1.4.1.9.9.815.1.102.1.2.2.1		not-accessible	This is the IP interface table. When an IP interface is created it can be configured in the other tables found in this MIB.
me1200IpConfigInterfacesEntry	1.3.6.1.4.1.9.9.815.1.102.1.2.2.1.1		not-accessible	Entries in this table represents IP interfaces created on the system
NUM me1200IpConfigInterfacesIfIndex	1.3.6.1.4.1.9.9.815.1.102.1.2.2.1.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
ME1 me1200IpConfigInterfacesAction	1.3.6.1.4.1.9.9.815.1.102.1.2.2.1.1.100	ME1200RowEditorState	read-write	Action
me1200IpConfigInterfacesTableRowEditor	1.3.6.1.4.1.9.9.815.1.102.1.2.2.2
NUM me1200IpConfigInterfacesTableRowEditorIfIndex	1.3.6.1.4.1.9.9.815.1.102.1.2.2.2.1	ME1200InterfaceIndex	read-write	Interface index number.
ME1 me1200IpConfigInterfacesTableRowEditorAction	1.3.6.1.4.1.9.9.815.1.102.1.2.2.2.100	ME1200RowEditorState	read-write	Action
me1200IpConfigInterfacesIpv4Table	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3		not-accessible	IPv4 interface configuration table. This table allows IPv4 related configuration of the corresponding IP interface.
me1200IpConfigInterfacesIpv4Entry	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpConfigInterfacesIpv4IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
T/F me1200IpConfigInterfacesIpv4Active	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.2	TruthValue	read-write	Enable IPv4. IPv4 can only be enabled if either the dhcp client is enabled, or a valid address has been configured.
T/F me1200IpConfigInterfacesIpv4EnableDhcpClient	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.3	TruthValue	read-write	Enable IPv4 dhcp client. Note: the dhcp client can only be enabled if there is no conflicts in the values of: ipv4Address, prefixSize, and dhcpClientFallbackTimeout
IP me1200IpConfigInterfacesIpv4Ipv4Address	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.4	IpAddress	read-write	IPv4 address. Note: Multiple interfaces may not have overlapping networks.
U32 me1200IpConfigInterfacesIpv4PrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.5	Unsigned32	read-write	Prefix size of the network. Note: Multiple interfaces may not have overlapping networks.
U32 me1200IpConfigInterfacesIpv4DhcpClientFallbackTimeout	1.3.6.1.4.1.9.9.815.1.102.1.2.2.3.1.6	Unsigned32	read-write	Dhcp client fallback timer. If dhcp is disabled then this object has no effect. If dhcp is enabled and the fallback timeout value is different from zero, then this timer will stop the dhcp process and assign the ipv4Address to the interface instead
me1200IpConfigRoutes	1.3.6.1.4.1.9.9.815.1.102.1.2.3
me1200IpConfigInterfacesRoutesIpv4Table	1.3.6.1.4.1.9.9.815.1.102.1.2.3.1		not-accessible	This is the IPv4 route configuration table.
me1200IpConfigInterfacesRoutesIpv4Entry	1.3.6.1.4.1.9.9.815.1.102.1.2.3.1.1		not-accessible	Each entry in this table represents a configured route. NOTE: that a route may be configured without being active.
IP me1200IpConfigInterfacesRoutesIpv4NetworkAddress	1.3.6.1.4.1.9.9.815.1.102.1.2.3.1.1.1	IpAddress	not-accessible	Network address
I32 me1200IpConfigInterfacesRoutesIpv4NetworkPrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.2.3.1.1.2	Integer32	not-accessible	Network prefix size
IP me1200IpConfigInterfacesRoutesIpv4NextHop	1.3.6.1.4.1.9.9.815.1.102.1.2.3.1.1.3	IpAddress	not-accessible	Next-hop address
ME1 me1200IpConfigInterfacesRoutesIpv4Action	1.3.6.1.4.1.9.9.815.1.102.1.2.3.1.1.100	ME1200RowEditorState	read-write	Action
me1200IpConfigInterfacesRoutesIpv4RowEditor	1.3.6.1.4.1.9.9.815.1.102.1.2.3.2
IP me1200IpConfigInterfacesRoutesIpv4RowEditorNetworkAddress	1.3.6.1.4.1.9.9.815.1.102.1.2.3.2.1	IpAddress	read-write	Network address
I32 me1200IpConfigInterfacesRoutesIpv4RowEditorNetworkPrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.2.3.2.2	Integer32	read-write	Network prefix size
IP me1200IpConfigInterfacesRoutesIpv4RowEditorNextHop	1.3.6.1.4.1.9.9.815.1.102.1.2.3.2.3	IpAddress	read-write	Next-hop address
ME1 me1200IpConfigInterfacesRoutesIpv4RowEditorAction	1.3.6.1.4.1.9.9.815.1.102.1.2.3.2.100	ME1200RowEditorState	read-write	Action
me1200IpConfigInterfacesRoutesIpv6Table	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3		not-accessible	This is the IPv6 route configuration table.
me1200IpConfigInterfacesRoutesIpv6Entry	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3.1		not-accessible	Each entry in this table represents a configured route. NOTE: that a route may be configured without being active.
ADR me1200IpConfigInterfacesRoutesIpv6NetworkAddress	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3.1.1	InetAddressIPv6	not-accessible	Network address
I32 me1200IpConfigInterfacesRoutesIpv6NetworkPrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3.1.2	Integer32	not-accessible	Network prefix size
ADR me1200IpConfigInterfacesRoutesIpv6NextHop	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3.1.3	InetAddressIPv6	not-accessible	Next-hop address
NUM me1200IpConfigInterfacesRoutesIpv6NextHopInterface	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3.1.4	ME1200InterfaceIndex	not-accessible	If the next-hop address is a link-local address, then the interface of the link-local address must be specified here. Otherwise this value is not used.
ME1 me1200IpConfigInterfacesRoutesIpv6Action	1.3.6.1.4.1.9.9.815.1.102.1.2.3.3.1.100	ME1200RowEditorState	read-write	Action
me1200IpConfigInterfacesRoutesIpv6RowEditor	1.3.6.1.4.1.9.9.815.1.102.1.2.3.4
ADR me1200IpConfigInterfacesRoutesIpv6RowEditorNetworkAddress	1.3.6.1.4.1.9.9.815.1.102.1.2.3.4.1	InetAddressIPv6	read-write	Network address
I32 me1200IpConfigInterfacesRoutesIpv6RowEditorNetworkPrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.2.3.4.2	Integer32	read-write	Network prefix size
ADR me1200IpConfigInterfacesRoutesIpv6RowEditorNextHop	1.3.6.1.4.1.9.9.815.1.102.1.2.3.4.3	InetAddressIPv6	read-write	Next-hop address
NUM me1200IpConfigInterfacesRoutesIpv6RowEditorNextHopInterface	1.3.6.1.4.1.9.9.815.1.102.1.2.3.4.4	ME1200InterfaceIndex	read-write	If the next-hop address is a link-local address, then the interface of the link-local address must be specified here. Otherwise this value is not used.
ME1 me1200IpConfigInterfacesRoutesIpv6RowEditorAction	1.3.6.1.4.1.9.9.815.1.102.1.2.3.4.100	ME1200RowEditorState	read-write	Action
me1200IpStatus	1.3.6.1.4.1.9.9.815.1.102.1.3
me1200IpStatusGlobals	1.3.6.1.4.1.9.9.815.1.102.1.3.1
me1200IpStatusGlobalsIpv4NeighbourTable	1.3.6.1.4.1.9.9.815.1.102.1.3.1.1		not-accessible	This is the IPv4 neighbour table (ARP).
me1200IpStatusGlobalsIpv4NeighbourEntry	1.3.6.1.4.1.9.9.815.1.102.1.3.1.1.1		not-accessible	Each entry in this table represents an entry in the underlaying operting systems ARP table.
IP me1200IpStatusGlobalsIpv4NeighbourIpv4	1.3.6.1.4.1.9.9.815.1.102.1.3.1.1.1.1	IpAddress	not-accessible	IPv4 address.
MAC me1200IpStatusGlobalsIpv4NeighbourMacAddress	1.3.6.1.4.1.9.9.815.1.102.1.3.1.1.1.2	MacAddress	read-only	Mac address associated to the IP address
U32 me1200IpStatusGlobalsIpv4NeighbourInterface	1.3.6.1.4.1.9.9.815.1.102.1.3.1.1.1.3	Unsigned32	read-only	The interface which the neighbour can be reached on.
me1200IpStatusGlobalsIpv6NeighbourTable	1.3.6.1.4.1.9.9.815.1.102.1.3.1.2		not-accessible	This is the IPv6 neighbour table.
me1200IpStatusGlobalsIpv6NeighbourEntry	1.3.6.1.4.1.9.9.815.1.102.1.3.1.2.1		not-accessible	Each entry in this table represents an entry in the underlaying operting systems nieghbour table.
ADR me1200IpStatusGlobalsIpv6NeighbourIpAddress	1.3.6.1.4.1.9.9.815.1.102.1.3.1.2.1.1	InetAddressIPv6	not-accessible	Ip address
I32 me1200IpStatusGlobalsIpv6NeighbourInterfaceQuery	1.3.6.1.4.1.9.9.815.1.102.1.3.1.2.1.2	Integer32	not-accessible	If 'ipAddress' is a link-local address, then the interface index where the host can be reached must be specified here, otherwise this must be set to zero.
MAC me1200IpStatusGlobalsIpv6NeighbourMacAddress	1.3.6.1.4.1.9.9.815.1.102.1.3.1.2.1.3	MacAddress	read-only	Mac address associated to the IP address
U32 me1200IpStatusGlobalsIpv6NeighbourInterface	1.3.6.1.4.1.9.9.815.1.102.1.3.1.2.1.4	Unsigned32	read-only	The interface which the neighbour can be reached on.
me1200IpStatusInterfaces	1.3.6.1.4.1.9.9.815.1.102.1.3.2
me1200IpStatusInterfaceLinkTable	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1		not-accessible	This table provides link-layer status information for IP interfaces.
me1200IpStatusInterfaceLinkEntry	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpStatusInterfaceLinkIfIndex	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
U32 me1200IpStatusInterfaceLinkOsInterfaceIndex	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.2	Unsigned32	read-only	The interface index used by the underlaying operating system.
U32 me1200IpStatusInterfaceLinkMtu	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.3	Unsigned32	read-only	MTU for the interface.
MAC me1200IpStatusInterfaceLinkMacAddress	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.4	MacAddress	read-only	MAC-address of the interface.
T/F me1200IpStatusInterfaceLinkUp	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.5	TruthValue	read-only	Indicate if the interface is up.
T/F me1200IpStatusInterfaceLinkBroadcast	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.6	TruthValue	read-only	Indicates if the interface is capable of transmitting broadcast traffic.
T/F me1200IpStatusInterfaceLinkLoopback	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.7	TruthValue	read-only	Indicates if the interface is a loop-back interface
T/F me1200IpStatusInterfaceLinkRunning	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.8	TruthValue	read-only	Interface is running (according to the operating system)
T/F me1200IpStatusInterfaceLinkNoarp	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.9	TruthValue	read-only	Indicates if the interface will answer to ARP requests.
T/F me1200IpStatusInterfaceLinkPromisc	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.10	TruthValue	read-only	Indicates if the interface is in promisc mode.
T/F me1200IpStatusInterfaceLinkMulticast	1.3.6.1.4.1.9.9.815.1.102.1.3.2.1.1.11	TruthValue	read-only	Indicates if the interface supports multicast.
me1200IpStatusInterfaceIpv4Table	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2		not-accessible	This table provides IPv4 status information for IP interfaces. If an interface is configured to use a DHCP client, then the address can be found here.
me1200IpStatusInterfaceIpv4Entry	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpStatusInterfaceIpv4IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
IP me1200IpStatusInterfaceIpv4Address	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1.2	IpAddress	read-only	IPv4 address.
U32 me1200IpStatusInterfaceIpv4Prefix	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1.3	Unsigned32	read-only	Prefix length of the IP address.
U32 me1200IpStatusInterfaceIpv4Broadcast	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1.4	Unsigned32	read-only	Broadcast address.
U32 me1200IpStatusInterfaceIpv4ReasmMaxSize	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1.5	Unsigned32	read-only	Maximum re-assembly size.
U32 me1200IpStatusInterfaceIpv4ArpRetransmitTime	1.3.6.1.4.1.9.9.815.1.102.1.3.2.2.1.6	Unsigned32	read-only	Arp retransmit time.
me1200IpStatusInterfaceDhcpClientV4Table	1.3.6.1.4.1.9.9.815.1.102.1.3.2.3		not-accessible	This table provides status on the DHCP client which may be running on a given interface.
me1200IpStatusInterfaceDhcpClientV4Entry	1.3.6.1.4.1.9.9.815.1.102.1.3.2.3.1		not-accessible	Each entry in this table represents an instance of a DHCP client.
NUM me1200IpStatusInterfaceDhcpClientV4IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.3.2.3.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
ME1 me1200IpStatusInterfaceDhcpClientV4State	1.3.6.1.4.1.9.9.815.1.102.1.3.2.3.1.2	ME1200DhcpClientState	read-only	State of the DHCP client.
U32 me1200IpStatusInterfaceDhcpClientV4ServerIp	1.3.6.1.4.1.9.9.815.1.102.1.3.2.3.1.3	Unsigned32	read-only	IP address of the DHCP server who has provided the DHCP offer.
me1200IpStatusInterfaceIpv6Table	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4		not-accessible	This table provides IPv6 status information for IP interfaces. If an interface is configured to use a DHCP client, then the address can be found here.
me1200IpStatusInterfaceIpv6Entry	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpStatusInterfaceIpv6IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
ADR me1200IpStatusInterfaceIpv6Address	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.2	InetAddressIPv6	read-only	IPv6 address
U32 me1200IpStatusInterfaceIpv6Prefix	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.3	Unsigned32	read-only	Prefix length of the IP address.
T/F me1200IpStatusInterfaceIpv6Tentative	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.4	TruthValue	read-only	An address whose uniqueness on a link is being verified, prior to its assignment to an interface. A tentative address is not considered assigned to an interface in the usual sense.
T/F me1200IpStatusInterfaceIpv6Duplicated	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.5	TruthValue	read-only	Indicates the address duplication is detected by Duplicate Address Detection (a.k.a. DAD). If the address is a link-local address formed from an interface identifier based on the hardware address, which is supposed to be uniquely assigned (e.g., EUI-64 for an Ethernet interface), IP operation on the interface SHOULD be disabled.
T/F me1200IpStatusInterfaceIpv6Detached	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.6	TruthValue	read-only	Indicates this address is ready to be detached from the link (IPv6 network).
T/F me1200IpStatusInterfaceIpv6Nodad	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.7	TruthValue	read-only	Indicates this address does not perform Duplicate Address Detection (a.k.a. DAD).
T/F me1200IpStatusInterfaceIpv6Autoconf	1.3.6.1.4.1.9.9.815.1.102.1.3.2.4.1.8	TruthValue	read-only	Indicates this address is capable of being retrieved by stateless address Autoconfiguration.
me1200IpStatusRoutes	1.3.6.1.4.1.9.9.815.1.102.1.3.3
me1200IpStatusRoutesIpv4Table	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1		not-accessible	This table provides IPv4 routing status.
me1200IpStatusRoutesIpv4Entry	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1		not-accessible	Each entry in this table represents an IP route which is present in the systems routing table.
IP me1200IpStatusRoutesIpv4NetworkAddress	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.1	IpAddress	not-accessible	Network address
I32 me1200IpStatusRoutesIpv4NetworkPrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.2	Integer32	not-accessible	Network prefix size
IP me1200IpStatusRoutesIpv4NextHop	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.3	IpAddress	not-accessible	Next-hop address
NUM me1200IpStatusRoutesIpv4DerivedNextHopInterface	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.4	ME1200InterfaceIndex	read-only	next hop interface
T/F me1200IpStatusRoutesIpv4FlagUp	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.35	TruthValue	read-only	The route is up
T/F me1200IpStatusRoutesIpv4FlagHost	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.36	TruthValue	read-only	The route is forwarding to this host (loop-back)
T/F me1200IpStatusRoutesIpv4FlagGateway	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.37	TruthValue	read-only	The route is using a gateway as next-hop, of not set then an interface is used.
T/F me1200IpStatusRoutesIpv4OwnerConf	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.67	TruthValue	read-only	The route is installed as part of the user configuration.
T/F me1200IpStatusRoutesIpv4OwnerDhcp	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.68	TruthValue	read-only	The route is installed by a DHCP client.
T/F me1200IpStatusRoutesIpv4OwnerDynamic	1.3.6.1.4.1.9.9.815.1.102.1.3.3.1.1.69	TruthValue	read-only	The route is installed by a routing protocol.
me1200IpStatusRoutesIpv6Table	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2		not-accessible	This table provides IPv6 routing status.
me1200IpStatusRoutesIpv6Entry	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1		not-accessible	Each entry in this table represents an IP route which is present in the systems routing table.
ADR me1200IpStatusRoutesIpv6NetworkAddress	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.1	InetAddressIPv6	not-accessible	Network address
I32 me1200IpStatusRoutesIpv6NetworkPrefixSize	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.2	Integer32	not-accessible	Network prefix size
ADR me1200IpStatusRoutesIpv6NextHop	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.3	InetAddressIPv6	not-accessible	Next-hop address
NUM me1200IpStatusRoutesIpv6NextHopInterface	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.4	ME1200InterfaceIndex	not-accessible	If the next-hop address is a link-local address, then the interface of the link-local address must be specified here. Otherwise this value is not used.
NUM me1200IpStatusRoutesIpv6DerivedNextHopInterface	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.5	ME1200InterfaceIndex	read-only	next hop interface
T/F me1200IpStatusRoutesIpv6FlagUp	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.36	TruthValue	read-only	The route is up
T/F me1200IpStatusRoutesIpv6FlagHost	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.37	TruthValue	read-only	The route is forwarding to this host (loop-back)
T/F me1200IpStatusRoutesIpv6FlagGateway	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.38	TruthValue	read-only	The route is using a gateway as next-hop, of not set then an interface is used.
T/F me1200IpStatusRoutesIpv6OwnerConf	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.68	TruthValue	read-only	The route is installed as part of the user configuration.
T/F me1200IpStatusRoutesIpv6OwnerDhcp	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.69	TruthValue	read-only	The route is installed by a DHCP client.
T/F me1200IpStatusRoutesIpv6OwnerDynamic	1.3.6.1.4.1.9.9.815.1.102.1.3.3.2.1.70	TruthValue	read-only	The route is installed by a routing protocol.
me1200IpStatistics	1.3.6.1.4.1.9.9.815.1.102.1.4
me1200IpStatisticsGlobals	1.3.6.1.4.1.9.9.815.1.102.1.4.1
me1200IpStatisticsGlobalsIpv4	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1
U32 me1200IpStatisticsGlobalsIpv4InReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.1	Unsigned32	read-only	The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInReceivesEx	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.2	Counter64	read-only	The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as InReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.3	Unsigned32	read-only	The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in InReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.4	Counter64	read-only	The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as InOctets, but allows for larger value. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InHdrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.5	Unsigned32	read-only	The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.6	Unsigned32	read-only	The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InAddrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.7	Unsigned32	read-only	The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InUnknownProtos	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.8	Unsigned32	read-only	The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InTruncatedPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.9	Unsigned32	read-only	The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.10	Unsigned32	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.11	Counter64	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as InForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4ReasmReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.12	Unsigned32	read-only	The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4ReasmOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.13	Unsigned32	read-only	The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4ReasmFails	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.14	Unsigned32	read-only	The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.15	Unsigned32	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.16	Unsigned32	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.17	Counter64	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.18	Unsigned32	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in OutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.19	Counter64	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as OutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.20	Unsigned32	read-only	The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.21	Unsigned32	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.22	Counter64	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as OutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.23	Unsigned32	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in OutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutFragReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.24	Unsigned32	read-only	The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutFragOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.25	Unsigned32	read-only	The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutFragFails	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.26	Unsigned32	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutFragCreates	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.27	Unsigned32	read-only	The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.28	Unsigned32	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.29	Counter64	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as OutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.30	Unsigned32	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in OutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.31	Counter64	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as OutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.32	Unsigned32	read-only	The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.33	Counter64	read-only	The number of IP multicast datagrams received. This object counts the same datagrams as InMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.34	Unsigned32	read-only	The total number of octets received in IP multicast datagrams. Octets from datagrams counted in InMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.35	Counter64	read-only	The total number of octets received in IP multicast datagrams. This object counts the same octets as InMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.36	Unsigned32	read-only	The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.37	Counter64	read-only	The number of IP multicast datagrams transmitted. This object counts the same datagrams as OutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.38	Unsigned32	read-only	The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in OutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.39	Counter64	read-only	The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as OutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4InBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.40	Unsigned32	read-only	The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCInBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.41	Counter64	read-only	The number of IP broadcast datagrams received. This object counts the same datagrams as InBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv4OutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.42	Unsigned32	read-only	The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4HCOutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.43	Counter64	read-only	The number of IP broadcast datagrams transmitted. This object counts the same datagrams as OutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv4DiscontinuityTime	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.44	Counter64	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the IP stack, then this object contains a zero value.
U32 me1200IpStatisticsGlobalsIpv4RefreshRate	1.3.6.1.4.1.9.9.815.1.102.1.4.1.1.45	Unsigned32	read-only	The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
me1200IpStatisticsGlobalsIpv6	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2
U32 me1200IpStatisticsGlobalsIpv6InReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.1	Unsigned32	read-only	The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.2	Counter64	read-only	The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as InReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.3	Unsigned32	read-only	The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in InReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.4	Counter64	read-only	The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as InOctets, but allows for larger value. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InHdrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.5	Unsigned32	read-only	The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.6	Unsigned32	read-only	The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InAddrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.7	Unsigned32	read-only	The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InUnknownProtos	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.8	Unsigned32	read-only	The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InTruncatedPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.9	Unsigned32	read-only	The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.10	Unsigned32	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.11	Counter64	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as InForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6ReasmReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.12	Unsigned32	read-only	The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6ReasmOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.13	Unsigned32	read-only	The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6ReasmFails	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.14	Unsigned32	read-only	The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.15	Unsigned32	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.16	Unsigned32	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.17	Counter64	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.18	Unsigned32	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in OutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.19	Counter64	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as OutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.20	Unsigned32	read-only	The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.21	Unsigned32	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.22	Counter64	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as OutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.23	Unsigned32	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in OutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutFragReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.24	Unsigned32	read-only	The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutFragOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.25	Unsigned32	read-only	The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutFragFails	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.26	Unsigned32	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutFragCreates	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.27	Unsigned32	read-only	The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.28	Unsigned32	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.29	Counter64	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as OutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.30	Unsigned32	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in OutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.31	Counter64	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as OutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.32	Unsigned32	read-only	The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.33	Counter64	read-only	The number of IP multicast datagrams received. This object counts the same datagrams as InMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.34	Unsigned32	read-only	The total number of octets received in IP multicast datagrams. Octets from datagrams counted in InMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.35	Counter64	read-only	The total number of octets received in IP multicast datagrams. This object counts the same octets as InMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.36	Unsigned32	read-only	The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.37	Counter64	read-only	The number of IP multicast datagrams transmitted. This object counts the same datagrams as OutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.38	Unsigned32	read-only	The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in OutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.39	Counter64	read-only	The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as OutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6InBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.40	Unsigned32	read-only	The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCInBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.41	Counter64	read-only	The number of IP broadcast datagrams received. This object counts the same datagrams as InBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsGlobalsIpv6OutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.42	Unsigned32	read-only	The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6HCOutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.43	Counter64	read-only	The number of IP broadcast datagrams transmitted. This object counts the same datagrams as OutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsGlobalsIpv6DiscontinuityTime	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.44	Counter64	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the IP stack, then this object contains a zero value.
U32 me1200IpStatisticsGlobalsIpv6RefreshRate	1.3.6.1.4.1.9.9.815.1.102.1.4.1.2.45	Unsigned32	read-only	The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
me1200IpStatisticsInterfaces	1.3.6.1.4.1.9.9.815.1.102.1.4.2
me1200IpStatisticsInterfaceLinkTable	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1		not-accessible	This table provides interface link statistics for a given IP interface.
me1200IpStatisticsInterfaceLinkEntry	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpStatisticsInterfaceLinkIfIndex	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
C64 me1200IpStatisticsInterfaceLinkInPackets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.2	Counter64	read-only	The total number of packets which were delivered by MAC layer to IP layer.
C64 me1200IpStatisticsInterfaceLinkOutPackets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.3	Counter64	read-only	The total number of packets that IP protocols requested be transmitted, including those that were discarded or not sent.
C64 me1200IpStatisticsInterfaceLinkInBytes	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.4	Counter64	read-only	The total number of octets received on the interface, including framing characters.
C64 me1200IpStatisticsInterfaceLinkOutBytes	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.5	Counter64	read-only	The total number of octets transmitted out of the interface, including framing characters.
C64 me1200IpStatisticsInterfaceLinkInMulticasts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.6	Counter64	read-only	The number of packets, delivered by MAC layer to IP layer, which were addressed to a MAC multicast address. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 me1200IpStatisticsInterfaceLinkOutMulticasts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.7	Counter64	read-only	The total number of packets that IP protocols requested be transmitted, and which were addressed to a multicast MAC address, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses.
C64 me1200IpStatisticsInterfaceLinkInBroadcasts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.8	Counter64	read-only	The number of packets, delivered by MAC layer to IP layer, which were addressed to a MAC broadcast address.
C64 me1200IpStatisticsInterfaceLinkOutBroadcasts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.1.1.9	Counter64	read-only	The total number of packets that IP protocols requested be transmitted, and which were addressed to a broadcast MAC address, including those that were discarded or not sent.
me1200IpStatisticsInterfaceIpv4Table	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2		not-accessible	This table provides IPv4 related statitics for a given IP interface.
me1200IpStatisticsInterfaceIpv4Entry	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpStatisticsInterfaceIpv4IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
U32 me1200IpStatisticsInterfaceIpv4InReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.2	Unsigned32	read-only	The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.3	Counter64	read-only	The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as InReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.4	Unsigned32	read-only	The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in InReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.5	Counter64	read-only	The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as InOctets, but allows for larger value. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InHdrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.6	Unsigned32	read-only	The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.7	Unsigned32	read-only	The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InAddrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.8	Unsigned32	read-only	The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InUnknownProtos	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.9	Unsigned32	read-only	The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InTruncatedPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.10	Unsigned32	read-only	The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.11	Unsigned32	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.12	Counter64	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as InForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4ReasmReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.13	Unsigned32	read-only	The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4ReasmOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.14	Unsigned32	read-only	The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4ReasmFails	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.15	Unsigned32	read-only	The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.16	Unsigned32	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.17	Unsigned32	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.18	Counter64	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.19	Unsigned32	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in OutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.20	Counter64	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as OutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.21	Unsigned32	read-only	The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.22	Unsigned32	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.23	Counter64	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as OutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.24	Unsigned32	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in OutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutFragReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.25	Unsigned32	read-only	The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutFragOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.26	Unsigned32	read-only	The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutFragFails	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.27	Unsigned32	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutFragCreates	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.28	Unsigned32	read-only	The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.29	Unsigned32	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.30	Counter64	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as OutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.31	Unsigned32	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in OutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.32	Counter64	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as OutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.33	Unsigned32	read-only	The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.34	Counter64	read-only	The number of IP multicast datagrams received. This object counts the same datagrams as InMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.35	Unsigned32	read-only	The total number of octets received in IP multicast datagrams. Octets from datagrams counted in InMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.36	Counter64	read-only	The total number of octets received in IP multicast datagrams. This object counts the same octets as InMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.37	Unsigned32	read-only	The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.38	Counter64	read-only	The number of IP multicast datagrams transmitted. This object counts the same datagrams as OutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.39	Unsigned32	read-only	The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in OutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.40	Counter64	read-only	The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as OutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4InBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.41	Unsigned32	read-only	The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCInBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.42	Counter64	read-only	The number of IP broadcast datagrams received. This object counts the same datagrams as InBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv4OutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.43	Unsigned32	read-only	The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4HCOutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.44	Counter64	read-only	The number of IP broadcast datagrams transmitted. This object counts the same datagrams as OutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv4DiscontinuityTime	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.45	Counter64	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the IP stack, then this object contains a zero value.
U32 me1200IpStatisticsInterfaceIpv4RefreshRate	1.3.6.1.4.1.9.9.815.1.102.1.4.2.2.1.46	Unsigned32	read-only	The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
me1200IpStatisticsInterfaceIpv6Table	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3		not-accessible	This table provides IPv6 related statitics for a given IP interface.
me1200IpStatisticsInterfaceIpv6Entry	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1		not-accessible	Each entry in this table represents an IP interface.
NUM me1200IpStatisticsInterfaceIpv6IfIndex	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
U32 me1200IpStatisticsInterfaceIpv6InReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.2	Unsigned32	read-only	The total number of input IP datagrams received, including those received in error. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInReceives	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.3	Counter64	read-only	The total number of input IP datagrams received, including those received in error. This object counts the same datagrams as InReceives, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.4	Unsigned32	read-only	The total number of octets received in input IP datagrams, including those received in error. Octets from datagrams counted in InReceives MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.5	Counter64	read-only	The total number of octets received in input IP datagrams, including those received in error. This object counts the same octets as InOctets, but allows for larger value. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InHdrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.6	Unsigned32	read-only	The number of input IP datagrams discarded due to errors in their IP headers, including version number mismatch, other format errors, hop count exceeded, errors discovered in processing their IP options, etc. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.7	Unsigned32	read-only	The number of input IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InAddrErrors	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.8	Unsigned32	read-only	The number of input IP datagrams discarded because the IP address in their IP header's destination field was not a valid address to be received at this entity. This count includes invalid addresses (e.g., ::0). For entities that are not IP routers and therefore do not forward datagrams, this counter includes datagrams discarded because the destination address was not a local address. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InUnknownProtos	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.9	Unsigned32	read-only	The number of locally-addressed IP datagrams received successfully but discarded because of an unknown or unsupported protocol. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InTruncatedPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.10	Unsigned32	read-only	The number of input IP datagrams discarded because the datagram frame didn't carry enough data. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.11	Unsigned32	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. When tracking interface statistics, the counter of the incoming interface is incremented for each datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.12	Counter64	read-only	The number of input datagrams for which this entity was not their final IP destination and for which this entity attempted to find a route to forward them to that final destination. This object counts the same packets as InForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6ReasmReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.13	Unsigned32	read-only	The number of IP fragments received that needed to be reassembled at this interface. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6ReasmOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.14	Unsigned32	read-only	The number of IP datagrams successfully reassembled. When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6ReasmFails	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.15	Unsigned32	read-only	The number of failures detected by the IP re-assembly algorithm (for whatever reason: timed out, errors, etc.). Note that this is not necessarily a count of discarded IP fragments since some algorithms (notably the algorithm in RFC 815) can lose track of the number of fragments by combining them as they are received. When tracking interface statistics, the counter of the interface to which these fragments were addressed is incremented. This interface might not be the same as the input interface for some of the fragments. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.16	Unsigned32	read-only	The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but were discarded (e.g., for lack of buffer space). Note that this counter does not include any datagrams discarded while awaiting re-assembly. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.17	Unsigned32	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). When tracking interface statistics, the counter of the interface to which these datagrams were addressed is incremented. This interface might not be the same as the input interface for some of the datagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInDelivers	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.18	Counter64	read-only	The total number of datagrams successfully delivered to IP user-protocols (including ICMP). This object counts the same packets as ipSystemStatsInDelivers, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.19	Unsigned32	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. Note that this counter does not include any datagrams counted in OutForwDatagrams. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutRequests	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.20	Counter64	read-only	The total number of IP datagrams that local IP user-protocols (including ICMP) supplied to IP in requests for transmission. This object counts the same packets as OutRequests, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutNoRoutes	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.21	Unsigned32	read-only	The number of locally generated IP datagrams discarded because no route could be found to transmit them to their destination. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.22	Unsigned32	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully forwarded datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutForwDatagrams	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.23	Counter64	read-only	The number of datagrams for which this entity was not their final IP destination and for which it was successful in finding a path to their final destination. This object counts the same packets as OutForwDatagrams, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutDiscards	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.24	Unsigned32	read-only	The number of output IP datagrams for which no problem was encountered to prevent their transmission to their destination, but were discarded (e.g., for lack of buffer space). Note that this counter would include datagrams counted in OutForwDatagrams if any such datagrams met this (discretionary) discard criterion. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutFragReqds	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.25	Unsigned32	read-only	The number of IP datagrams that would require fragmentation in order to be transmitted. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutFragOKs	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.26	Unsigned32	read-only	The number of IP datagrams that have been successfully fragmented. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutFragFails	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.27	Unsigned32	read-only	The number of IP datagrams that have been discarded because they needed to be fragmented but could not be. This includes IPv4 packets that have the DF bit set and IPv6 packets that are being forwarded and exceed the outgoing link MTU. When tracking interface statistics, the counter of the outgoing interface is incremented for an unsuccessfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutFragCreates	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.28	Unsigned32	read-only	The number of output datagram fragments that have been generated as a result of IP fragmentation. When tracking interface statistics, the counter of the outgoing interface is incremented for a successfully fragmented datagram. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.29	Unsigned32	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This includes datagrams generated locally and those forwarded by this entity. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutTransmits	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.30	Counter64	read-only	The total number of IP datagrams that this entity supplied to the lower layers for transmission. This object counts the same datagrams as OutTransmits, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.31	Unsigned32	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. Octets from datagrams counted in OutTransmits MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.32	Counter64	read-only	The total number of octets in IP datagrams delivered to the lower layers for transmission. This objects counts the same octets as OutOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.33	Unsigned32	read-only	The number of IP multicast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.34	Counter64	read-only	The number of IP multicast datagrams received. This object counts the same datagrams as InMcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.35	Unsigned32	read-only	The total number of octets received in IP multicast datagrams. Octets from datagrams counted in InMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.36	Counter64	read-only	The total number of octets received in IP multicast datagrams. This object counts the same octets as InMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.37	Unsigned32	read-only	The number of IP multicast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutMcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.38	Counter64	read-only	The number of IP multicast datagrams transmitted. This object counts the same datagrams as OutMcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.39	Unsigned32	read-only	The total number of octets transmitted in IP multicast datagrams. Octets from datagrams counted in OutMcastPkts MUST be counted here. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutMcastOctets	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.40	Counter64	read-only	The total number of octets transmitted in IP multicast datagrams. This object counts the same octets as OutMcastOctets, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6InBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.41	Unsigned32	read-only	The number of IP broadcast datagrams received. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCInBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.42	Counter64	read-only	The number of IP broadcast datagrams received. This object counts the same datagrams as InBcastPkts but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
U32 me1200IpStatisticsInterfaceIpv6OutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.43	Unsigned32	read-only	The number of IP broadcast datagrams transmitted. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6HCOutBcastPkts	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.44	Counter64	read-only	The number of IP broadcast datagrams transmitted. This object counts the same datagrams as OutBcastPkts, but allows for larger values. Discontinuities in the value of this counter can occur at re-initialization of the system, and at other times as indicated by the value of DiscontinuityTime.
C64 me1200IpStatisticsInterfaceIpv6DiscontinuityTime	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.45	Counter64	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the IP stack, then this object contains a zero value.
U32 me1200IpStatisticsInterfaceIpv6RefreshRate	1.3.6.1.4.1.9.9.815.1.102.1.4.2.3.1.46	Unsigned32	read-only	The minimum reasonable polling interval for this entry. This object provides an indication of the minimum amount of time required to update the counters in this entry.
me1200IpControl	1.3.6.1.4.1.9.9.815.1.102.1.5
me1200IpControlGlobals	1.3.6.1.4.1.9.9.815.1.102.1.5.1
T/F me1200IpControlGlobalsIpv4NeighbourTableClear	1.3.6.1.4.1.9.9.815.1.102.1.5.1.1	TruthValue	read-write	Flush the entries in IPv4 ARP cache except for the permanent ones.
T/F me1200IpControlGlobalsIpv6NeighbourTableClear	1.3.6.1.4.1.9.9.815.1.102.1.5.1.2	TruthValue	read-write	Erase all the NDP (Neighbor Discovery Protocol) entries registered in IPv6 neighbour cache.
ME1 me1200IpControlGlobalsIpv4SystemStatisticsClear	1.3.6.1.4.1.9.9.815.1.102.1.5.1.3	ME1200Unsigned8	read-write	Clear the system-wide IPv4 traffic statistics.
ME1 me1200IpControlGlobalsIpv6SystemStatisticsClear	1.3.6.1.4.1.9.9.815.1.102.1.5.1.4	ME1200Unsigned8	read-write	Clear the system-wide IPv6 traffic statistics.
me1200IpControlInterface	1.3.6.1.4.1.9.9.815.1.102.1.5.2
me1200IpControlInterfaceDhcpClientTable	1.3.6.1.4.1.9.9.815.1.102.1.5.2.1		not-accessible	This table provides control facilities to control an instance of the DHCP client.
me1200IpControlInterfaceDhcpClientEntry	1.3.6.1.4.1.9.9.815.1.102.1.5.2.1.1		not-accessible	Each entry in this table represents an instance of the DHCP client.
NUM me1200IpControlInterfaceDhcpClientIfIndex	1.3.6.1.4.1.9.9.815.1.102.1.5.2.1.1.1	ME1200InterfaceIndex	not-accessible	Interface index number.
T/F me1200IpControlInterfaceDhcpClientRestart	1.3.6.1.4.1.9.9.815.1.102.1.5.2.1.1.2	TruthValue	read-write	Restart the dhcp client.
me1200IpMIBConformance	1.3.6.1.4.1.9.9.815.1.102.2
me1200IpMIBCompliances	1.3.6.1.4.1.9.9.815.1.102.2.1
me1200IpMIBCompliance	1.3.6.1.4.1.9.9.815.1.102.2.1.1			The compliance statement for the implementation.
me1200IpMIBGroups	1.3.6.1.4.1.9.9.815.1.102.2.2
me1200IpCapabilitiesInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.1			A collection of objects suitable for bulk operations.
me1200IpConfigGlobalsMainInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.2			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesIpv6TableInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.3			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesTableInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.4			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesTableRowEditorInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.5			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesIpv4TableInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.6			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesRoutesIpv4TableInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.7			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesRoutesIpv4RowEditorInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.8			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesRoutesIpv6TableInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.9			A collection of objects suitable for bulk operations.
me1200IpConfigInterfacesRoutesIpv6RowEditorInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.10			A collection of objects suitable for bulk operations.
me1200IpStatusGlobalsIpv4NeighbourInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.11			A collection of objects suitable for bulk operations.
me1200IpStatusGlobalsIpv6NeighbourInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.12			A collection of objects suitable for bulk operations.
me1200IpStatusInterfaceLinkInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.13			A collection of objects suitable for bulk operations.
me1200IpStatusInterfaceIpv4InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.14			A collection of objects suitable for bulk operations.
me1200IpStatusInterfaceDhcpClientV4InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.15			A collection of objects suitable for bulk operations.
me1200IpStatusInterfaceIpv6InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.16			A collection of objects suitable for bulk operations.
me1200IpStatusRoutesIpv4InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.17			A collection of objects suitable for bulk operations.
me1200IpStatusRoutesIpv6InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.18			A collection of objects suitable for bulk operations.
me1200IpStatisticsGlobalsIpv4InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.19			A collection of objects suitable for bulk operations.
me1200IpStatisticsGlobalsIpv6InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.20			A collection of objects suitable for bulk operations.
me1200IpStatisticsInterfaceLinkInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.21			A collection of objects suitable for bulk operations.
me1200IpStatisticsInterfaceIpv4InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.22			A collection of objects suitable for bulk operations.
me1200IpStatisticsInterfaceIpv6InfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.23			A collection of objects suitable for bulk operations.
me1200IpControlGlobalsInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.24			A collection of objects suitable for bulk operations.
me1200IpControlInterfaceDhcpClientInfoGroup	1.3.6.1.4.1.9.9.815.1.102.2.2.25			A collection of objects suitable for bulk operations.

RFC description

IP configuration and DHCP client state management for Cisco ME1200 switches.

Start monitoring Cisco ME1200 Metro Ethernet access switch (IP routing capability/config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ME1200-IP-MIB