DNOS-ROUTE-POLICY-MIB

All MIBs › DNOS-ROUTE-POLICY-MIB

Organization: Dell, Inc.

Last Updated: 2012-10-01

Category: Technology: Routing, Vendor: Dell/DNOS

Description: Manages route policy and route map configuration for routing protocol filtering on Dell DNOS devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DNOS-ROUTE-POLICY-MIB?

DNOS-ROUTE-POLICY-MIB manages route policy and route-map configuration for routing-protocol filtering on Dell Networking OS (DNOS, formerly Dell Force10) switches and routers. It defines objects for route-policy statements, match/action sequencing, and per-interface application of route policies, governing how routes are filtered or modified as they are redistributed between protocols. Its monitoring value is largely configuration/software-state based: confirming which route-policy statements and sequences are active, their action types, and which interfaces have policies applied, helping diagnose routes being unexpectedly permitted, denied, or modified. It works alongside DNOS's broader routing MIBs (BGP, OSPF), since route policies are typically referenced from those protocols' redistribution configuration. It is deployed on Dell EMC Networking switches/routers running DNOS in enterprise and data-center environments, where network engineers typically load it into a DNOS-ROUTE-POLICY-MIB MIB Browser session to review the full object tree before applying policy changes.

IPNetwork Monitor allows you to monitor SNMP objects defined in DNOS-ROUTE-POLICY-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell EMC Networking (DNOS/Force10) switches and routers

Monitoring Examples

An administrator can inspect fastpathRoutePolicyStatementEntry for a given fastpathRoutePolicySequence to see the configured fastpathRoutePolicyStmtActionType (permit or deny), and check fastpathRoutePolicyIfTable/fastpathRoutePolicyIfEntry's fastpathRoutePolicyIfRowStatus to confirm a policy is actually applied to an interface. If routes that should be filtered are still being advertised, a mismatched or missing row in fastpathRoutePolicyIfTable is a likely cause.

What Can Be Monitored

route policy statement configuration
route policy action type
policy sequence ordering
per-interface policy application status

Imported Objects

From DNOS-ROUTING-MIB

fastPathRouting

MODULE-IDENTITY

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathRoutePolicy	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20			The MIB definitions for Route Policy system.
fastpathRoutePolicyNameTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1		not-accessible	Table to configure or fetch current list of route-map statements
fastpathRoutePolicyNameEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1		not-accessible	Each entry in this table corresponds to a route-map statement
STR fastpathRoutePolicyName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.1	DisplayString	read-create	The name of a Route Map statement.
FAS fastpathRoutePolicyStmtActionType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.2	FastpathRoutePolicyAction	read-create	The action associated with this route-map statement. This can be either Permit/Deny
U32 fastpathRoutePolicySequence	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.3	Unsigned32	read-create	Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number.
ROW fastpathRoutePolicyNameRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.1.1.4	RowStatus	read-create	Controls creation and deletion of Row Status entries.
fastpathRoutePolicyStamentTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2		not-accessible	Table to configure match or set statements in a route-map statement.
fastpathRoutePolicyStatementEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1		not-accessible	Each entry describes match and set terms in a route-map statement if configured
STR fastpathRoutePolicyStmtName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.1	DisplayString	not-accessible	The name of a Route Map.
U32 fastpathRoutePolicyStmtSeqNum	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.2	Unsigned32	not-accessible	Route Maps are linked together using sequence numbers. All Route Maps with the same index and with different sequence numbers are linked together and processed in order of increasing sequence number.
FAS fastpathRoutePolicyStmtAction	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.3	FastpathRoutePolicyAction	not-accessible	The action associated with this route-map statement. This can be either Permit/Deny
STR fastpathRoutePolicyStmtMatchIpv4AclList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.4	DisplayString	read-write	The string containing a list of IPv4 ACLs. This list contains either IPV4 standard ACL/IPV4 extended ACL/ named IPv4 ACL. In a single match statement, up to a maximum of 16 IPV4 ACLs can be included.
STR fastpathRoutePolicyStmtMatchIpv4AclDelList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.5	DisplayString	read-write	The string containing a list of IPv4 ACLs. This list contains either IPV4 standard ACL/IPV4 extended ACL/ named IPv4 ACL. In a single match statement, up to a maximum of 16 IPV4 ACLs can be included.This list is used to delete already configured match list of IPv4 ACLs in route-map statement.Earlier this list should have configured through MIB object fastpathRoutePolicyStmtMatchIpv4AclList
STR fastpathRoutePolicyStmtMatchMacAclList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.6	DisplayString	read-write	The string containing a list of MAC ACLs. This list contains upto 16 MAC ACL names that can be included in a match statement.
STR fastpathRoutePolicyStmtMatchMacAclDelList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.7	DisplayString	read-write	The string containing a list of MAC ACLs. This list contains upto 16 MAC ACL names that can be included in a match statement. This MIB object is used to delete MAC ACL lists matched in a route-map statement via fastpathRoutePolicyStmtMatchMacAclList.
U32 fastpathRoutePolicyStmtMatchPacketLengthRangeMin	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.8	Unsigned32	read-write	Minimum value in the packet length range in a match length term. A value of zero is used to disable/remove minimum length configuration.
U32 fastpathRoutePolicyStmtMatchPacketLengthRangeMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.9	Unsigned32	read-write	Maximum value in the packet length range in a match length term. A value of zero is used to disable/remove maximum length configuration.
STR fastpathRoutePolicyStmtSetIpNextHopList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.10	DisplayString	read-write	The string containing a list of next-hop IP addresses. Upto a maximum of 16 IP addresses can be specified
STR fastpathRoutePolicyStmtSetIpNextHopDelList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.11	DisplayString	read-write	The string containing a list of next-hop IP addresses. Upto a maximum of 16 IP addresses can be specified.This MIB object is used to delete IP next-hop list configured via fastpathRoutePolicyStmtSetIpNextHopList
STR fastpathRoutePolicyStmtSetDefaultIpNextHopList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.12	DisplayString	read-write	The string containing a list of default next-hop IP addresses. Upto a maximum of 16 IP addresses can be specified
STR fastpathRoutePolicyStmtSetDefaultIpNextHopDelList	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.13	DisplayString	read-write	The string containing a list of default next-hop IP addresses. Upto a maximum of 16 IP addresses can be specified.This MIB object is used to delete IP default next-hop list configured via fastpathRoutePolicyStmtSetDefaultIpNextHopList
FAS fastpathRoutePolicyStmtSetIpPrecedence	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.14	FastpathRoutePolicyStmtIpPrecedence	read-write	IP Precedence value to be remarked. This is specified through set clause in route-map statement. In order to remove configured precedence value, use invalid(8) option.
T/F fastpathRoutePolicyStmtSetIntfNull0	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.2.1.15	TruthValue	read-write	Specifying null0 as an interface in a route-map statement
fastpathRoutePolicyIfTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3		not-accessible	A table of interfaces on which route-map is applied.
fastpathRoutePolicyIfEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1		not-accessible
NUM fastpathRoutePolicyIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1.1	InterfaceIndex	read-create	Interface to which route-map needs to be applied or Interface from which route-map needs to be removed.
STR fastpathRoutePolicyIfName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1.2	DisplayString	read-create	The name of a Route Map.
ROW fastpathRoutePolicyIfRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.2.20.3.1.3	RowStatus	read-create	Controls creation and deletion of Row Status entries.

RFC description

Manages route-map statements and policy-based routing configuration for Dell PowerConnect switches.

Start monitoring Dell EMC Networking (DNOS/Force10) switch/router (route-map policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DNOS-ROUTE-POLICY-MIB

What Is DNOS-ROUTE-POLICY-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description