All MIBs › CISCO-WAN-3G-MIB › c3gModemTemperOnsetNotifThreshold
c3gModemTemperOnsetNotifThreshold
Module: CISCO-WAN-3G-MIB
OID (symbolic): CISCO-WAN-3G-MIB::c3gModemTemperOnsetNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.661.1.1.1.17
Node type: OBJECT-TYPE
Type: C3gTemperature
Access: read-write
Description: The modem temperature onset threshold value. If modem temperature goes above the threshold and the value of c3gModemTemperOnsetNotifEnabled is 'true', the c3gModemTemperOnsetNotif notification will be sent. The value of c3gModemTemperAbateNotifThreshold should be less than or equal to the value of c3gModemTemperOnsetNotifThreshold. e.g. setting c3gModemTemperAbateNotifThreshold to 50 degree Celsius and then setting c3gModemTemperOnsetNotifThreshold to 40 degree Celsius is not allowed and will be rejected.
What is c3gModemTemperOnsetNotifThreshold?
This read-write threshold defines the modem temperature, in degrees Celsius, above which the c3gModemTemperOnsetNotif notification is sent, provided c3gModemTemperOnsetNotifEnabled is set to true. An admin sets this to get proactive alerts about modem overheating before it becomes a reliability or hardware-damage concern, and the value must be greater than or equal to the abate threshold to avoid oscillating alerts. For example, setting this to 70 degrees Celsius means the admin gets notified the moment an outdoor-cabinet modem's internal temperature crosses that line, prompting a check of ventilation.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.17 snmpwalk -v2c -c public <target> CISCO-WAN-3G-MIB::c3gModemTemperOnsetNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.17.1 snmpget -v2c -c public <target> CISCO-WAN-3G-MIB::c3gModemTemperOnsetNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.661.1.1.1.17.1 s <value>
Start monitoring Cisco routers with 3G/4G LTE WAN interface modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-3G-MIB::c3gModemTemperOnsetNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco routers with 3G/4G LTE WAN interface modules from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1 | ciscoWan3gMIBObjects | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1 | c3gWanCommonTable | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1.1 | c3gWanCommonEntry | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1.1.17 | c3gModemTemperOnsetNotifThreshold | CISCO-WAN-3G-MIB |