CISCO-WAN-3G-MIB :: c3gRssiAbateNotifFlag

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-WAN-3G-MIBc3gRssiAbateNotifFlag

c3gRssiAbateNotifFlag

Module: CISCO-WAN-3G-MIB

OID (symbolic): CISCO-WAN-3G-MIB::c3gRssiAbateNotifFlag

OID (numeric): 1.3.6.1.4.1.9.9.661.1.1.1.26

Node type: OBJECT-TYPE

Type: C3gServiceCapability

Access: read-write

Description: This object is the flag bitmap to control the generation of notification c3gRssiAbateNotif. Each bit represents a service as defined in C3gServiceCapability, set the bit value to 1 to enable (and 0 to disable) the generation of notification c3gRssiAbateNotif for that service. The default value of this object is all bits are 0.

What is c3gRssiAbateNotifFlag?

This read-write bitmap, again following the C3gServiceCapability bit layout, controls which services have RSSI abate (recovery) notifications enabled, defaulting to all bits off. An admin enables the relevant bits here to be notified when a previously weak signal on a given service recovers, completing the alert pair started by the onset flag. For example, an admin who enabled the LTE bit in c3gRssiOnsetNotifFlag would typically also enable the LTE bit here so they're told both when LTE signal drops and when it comes back.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.26
snmpwalk -v2c -c public <target> CISCO-WAN-3G-MIB::c3gRssiAbateNotifFlag

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.26.1
snmpget -v2c -c public <target> CISCO-WAN-3G-MIB::c3gRssiAbateNotifFlag.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.661.1.1.1.26.1 s <value>

Start monitoring Cisco routers with 3G/4G LTE WAN interface modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-3G-MIB::c3gRssiAbateNotifFlag OID value, configure state conditions and alerts, and monitor any Cisco routers with 3G/4G LTE WAN interface modules from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.661ciscoWan3gMIBCISCO-WAN-3G-MIB
1.3.6.1.4.1.9.9.661.1ciscoWan3gMIBObjectsCISCO-WAN-3G-MIB
1.3.6.1.4.1.9.9.661.1.1c3gWanCommonTableCISCO-WAN-3G-MIB
1.3.6.1.4.1.9.9.661.1.1.1c3gWanCommonEntryCISCO-WAN-3G-MIB
1.3.6.1.4.1.9.9.661.1.1.1.26c3gRssiAbateNotifFlagCISCO-WAN-3G-MIB