All MIBs › CISCO-WAN-3G-MIB › c3gEcIoOnsetNotifThreshold
c3gEcIoOnsetNotifThreshold
Module: CISCO-WAN-3G-MIB
OID (symbolic): CISCO-WAN-3G-MIB::c3gEcIoOnsetNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.661.1.1.1.15
Node type: OBJECT-TYPE
Type: C3gEcIo
Access: read-write
Description: The EcIo onset threshold value. If EcIo goes below the threshold and the service bit in c3gEcIoOnsetNotifFlag is set, the c3gEcIoOnsetNotif notification for that service will be sent. The absolute value of c3gEcIoAbateNotifThreshold should be less than or equal to the absolute value of c3gEcIoOnsetNotifThreshold (|c3gEcIoAbateNotifThreshold| <= |c3gEcIoOnsetNotifThreshold|). e.g. setting c3gEcIoAbateNotifThreshold to -15 dB and then setting c3gEcIoOnsetNotifThreshold to -10 dB is not allowed and will be rejected.
What is c3gEcIoOnsetNotifThreshold?
This read-write threshold, in dB, sets the Ec/Io level below which the c3gEcIoOnsetNotif notification fires for a given service, provided that service's bit is set in c3gEcIoOnsetNotifFlag. Since Ec/Io reflects pilot-signal quality rather than raw strength, an admin uses this threshold to catch situations where the cellular signal is present but too noisy or interference-laden for reliable data service. For example, setting this threshold to -15 dB would trigger an alert once the EV-DO pilot's Ec/Io degrades below -15 dB, even if raw RSSI still looks acceptable.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.15 snmpwalk -v2c -c public <target> CISCO-WAN-3G-MIB::c3gEcIoOnsetNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.15.1 snmpget -v2c -c public <target> CISCO-WAN-3G-MIB::c3gEcIoOnsetNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.661.1.1.1.15.1 s <value>
Start monitoring Cisco routers with 3G/4G LTE WAN interface modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-3G-MIB::c3gEcIoOnsetNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco routers with 3G/4G LTE WAN interface modules from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1 | ciscoWan3gMIBObjects | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1 | c3gWanCommonTable | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1.1 | c3gWanCommonEntry | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1.1.15 | c3gEcIoOnsetNotifThreshold | CISCO-WAN-3G-MIB |