All MIBs › CISCO-WAN-3G-MIB › c3gRssiAbateNotifThreshold
c3gRssiAbateNotifThreshold
Module: CISCO-WAN-3G-MIB
OID (symbolic): CISCO-WAN-3G-MIB::c3gRssiAbateNotifThreshold
OID (numeric): 1.3.6.1.4.1.9.9.661.1.1.1.14
Node type: OBJECT-TYPE
Type: C3gRssi
Access: read-write
Description: The RSSI abate threshold value. If RSSI goes above the threshold and the service bit in c3gRssiAbateNotifFlag is set, the c3gRssiAbateNotif notification for that service will be sent. The absolute value of c3gRssiAbateNotifThreshold should be less than or equal to the absolute value of c3gRssiOnsetNotifThreshold (|c3gRssiAbateNotifThreshold| <= |c3gRssiOnsetNotifThreshold|). e.g. setting c3gRssiAbateNotifThreshold to -115 dBm and then setting c3gRssiOnsetNotifThreshold to -110 dBm is not allowed and will be rejected.
What is c3gRssiAbateNotifThreshold?
This read-write threshold, in dBm, defines the RSSI level above which the c3gRssiAbateNotif notification fires for a service, signaling that a previously weak signal has recovered, provided that service's bit is enabled in c3gRssiAbateNotifFlag. An admin sets this in tandem with the onset threshold to get a clear "all clear" notification once cellular signal strength recovers, closing the loop on an earlier weak-signal alert. For example, pairing an abate threshold of -95 dBm with an onset threshold of -100 dBm means the router alerts when signal drops below -100 dBm and alerts again once it climbs back above -95 dBm.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.14 snmpwalk -v2c -c public <target> CISCO-WAN-3G-MIB::c3gRssiAbateNotifThreshold
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.661.1.1.1.14.1 snmpget -v2c -c public <target> CISCO-WAN-3G-MIB::c3gRssiAbateNotifThreshold.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.661.1.1.1.14.1 s <value>
Start monitoring Cisco routers with 3G/4G LTE WAN interface modules with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-WAN-3G-MIB::c3gRssiAbateNotifThreshold OID value, configure state conditions and alerts, and monitor any Cisco routers with 3G/4G LTE WAN interface modules from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.661 | ciscoWan3gMIB | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1 | ciscoWan3gMIBObjects | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1 | c3gWanCommonTable | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1.1 | c3gWanCommonEntry | CISCO-WAN-3G-MIB |
| 1.3.6.1.4.1.9.9.661.1.1.1.14 | c3gRssiAbateNotifThreshold | CISCO-WAN-3G-MIB |