All MIBs › CROUTE-MIB › layer2GlobalsBridgeEnable
layer2GlobalsBridgeEnable
Module: CROUTE-MIB
OID (symbolic): CROUTE-MIB::layer2GlobalsBridgeEnable
OID (numeric): 1.3.6.1.4.1.81.31.3.3.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Whenever to activate the Bridge capability on the device. enable - set by the user, means activate the Bridge capability over the defined VLANs. disable - set by the user, means don't active the Bridge capability. backup - set by the user, means the Bridge capability is in stand-by. It will enter to activeBackup mode after IP REDUNDANCY mechanism will enter to active mode. activeBackup - set by the device (status), means the backup Bridge is working (after time-out of IP REDUNDANCY).
What is layer2GlobalsBridgeEnable?
This read-write enumerated integer controls whether Layer 2 bridging capability is active across the device's defined VLANs, with enable/disable set by the admin and backup/activeBackup reflecting a standby role tied to the IP Redundancy mechanism, paralleling ipGlobalsBOOTPRelayStatus's pattern. An admin sets this to backup(3) on a standby unit so its bridging capability activates automatically once IP Redundancy promotes it to active. For example, a backup device configured with layer2GlobalsBridgeEnable set to backup(3) will show activeBackup(4) once it takes over bridging duties after the primary unit's redundancy timeout expires.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.31.3.3.1 snmpwalk -v2c -c public <target> CROUTE-MIB::layer2GlobalsBridgeEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.31.3.3.1.1 snmpget -v2c -c public <target> CROUTE-MIB::layer2GlobalsBridgeEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.31.3.3.1.1 i <value>
Start monitoring Layer 3 switch platform (vendor unclear, BOOTP/RIP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CROUTE-MIB::layer2GlobalsBridgeEnable OID value, configure state conditions and alerts, and monitor any Layer 3 switch platform (vendor unclear, BOOTP/RIP) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.31 | croute | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3 | layer2 | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3.3 | layer2Globals | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3.3.1 | layer2GlobalsBridgeEnable | CROUTE-MIB |