All MIBs › CROUTE-MIB › ipRedundancyStatus
ipRedundancyStatus
Module: CROUTE-MIB
OID (symbolic): CROUTE-MIB::ipRedundancyStatus
OID (numeric): 1.3.6.1.4.1.81.31.1.9.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Whenever to activate the IP REDUNDANCY mechanism on the device. enable - set by the user, means activate the IP REDUNDANCY mechanism over the defined IP interfaces. disable - set by the user, means don't active the IP REDUNDANCY mechanism over the defined IP interfaces. inactive - set by the device (status), means the backup interface is in stand-by (after enable operation). active - set by the device (status), means the backup interface is working (after time-out).
What is ipRedundancyStatus?
This read-write enumerated integer controls the IP Redundancy failover mechanism, with enable/disable set by the admin and inactive/active reflecting the device's own current standby or failover state. An admin sets this to enable(1) on a backup router to have it stand ready to take over the primary's IP interfaces, and the device itself reports active(4) once it has taken over after a timeout. For example, after the admin enables IP Redundancy on a backup unit, it reports inactive(3) during normal operation and switches itself to active(4) only if the primary router stops responding.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.31.1.9.1 snmpwalk -v2c -c public <target> CROUTE-MIB::ipRedundancyStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.31.1.9.1.1 snmpget -v2c -c public <target> CROUTE-MIB::ipRedundancyStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.31.1.9.1.1 i <value>
Start monitoring Layer 3 switch platform (vendor unclear, BOOTP/RIP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CROUTE-MIB::ipRedundancyStatus OID value, configure state conditions and alerts, and monitor any Layer 3 switch platform (vendor unclear, BOOTP/RIP) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.31 | croute | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.1 | ipRoute | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.1.9 | ipRedundancyGlobals | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.1.9.1 | ipRedundancyStatus | CROUTE-MIB |