All MIBs › HUAWEI-MPLS-LDP-MIB
Organization: HuaweiMPLS Working Group
Last Updated: 1999-06-30
Category: MPLS and Traffic Engineering, Routing Protocols, Vendor: Huawei
Description: Huawei MPLS LDP (Label Distribution Protocol) MIB for managing LDP sessions, label bindings, and FEC mappings.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HUAWEI-MPLS-LDP-MIB?
HUAWEI-MPLS-LDP-MIB is a Huawei Technologies proprietary MIB configuring LDP (Label Distribution Protocol) LSR (Label Switch Router) parameters. Its LSR-incarnation table records LSR ID, loop-detection presence/admin status, path-vector limit, hop-count limit, loop-prevention presence/admin status, label-retention mode, incarnation ID, maximum LDP entities/local peers/remote peers/interfaces/LSPs/CR-LSP tunnels/ER-hops-per-CR-LSP-tunnel, row status, VC-merge capability and path-vector-in-all-label-mapping support, and label-request retry timer/attempt count, alongside an entity table. As a configuration MIB it lets an administrator confirm LDP loop-detection/prevention settings and platform scaling limits before troubleshooting an MPLS LSP that won't establish. It is deployed on Huawei routers running MPLS LDP. Engineers can download the HUAWEI-MPLS-LDP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HUAWEI-MPLS-LDP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Huawei routers (MPLS LDP)
Monitoring Examples
An administrator checks hwMplsLdpLsrLoopDetectionAdminStatus and hwMplsLdpLsrMaxLsps to confirm loop protection is enabled and the LSR hasn't hit its LSP scaling limit on a Huawei MPLS router.
What Can Be Monitored
- LDP loop-detection/prevention configuration and platform scaling limits
This MIB depends on
Related MIBs
Imported Objects
From HUAWEI-3COM-OID-MIB
| huaweiMgmt | OBJECT-IDENTITY |
| hwMpls | OBJECT-IDENTITY |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeInterval | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using hwMplsLdpAttemptedSessions OID:
Select a Huawei router running MPLS LDP as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hwMplsLdpAttemptedSessions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports a count of the total attempted sessions for this LDP Entity. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hwMplsLdp | 1.3.6.1.4.1.2011.5.12.2 | All rights reserved | ||
| hwMplsLdpObjects | 1.3.6.1.4.1.2011.5.12.2.1 | |||
| hwMplsLdpLsrObjects | 1.3.6.1.4.1.2011.5.12.2.1.1 | |||
| hwMplsLdpLsrIncarnTable | 1.3.6.1.4.1.2011.5.12.2.1.1.1 | not-accessible | HuaweiMPLS provides support for multiple incarnations of the MPLS Stack in a target. The LSR defined in the standard MIB is treated as an incarnation in this MIB. Using a local policy the Network administrator must group the LDP Entities that should be placed in an incarnation. | |
| hwMplsLdpLsrIncarnEntry | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1 | not-accessible | An entry in this table represents an LSR incarnation. All the entries in this table are created initially when the LDP is initiated. The row status of each entry will be in 'notInService' state initially. The row status must be set to 'active' after the necessary configurations are complete with respect to an incarnation. Currenlty the LSR ID of the incarnation is the only mandatory parameter that must be set before the rowStatus is set to 'active'. An LSR Incarnation Entity is uniquely indexed by its Incarnation Identifier. | |
| OID hwMplsLdpLsrID | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.1 | MplsLsrIdentifier | read-write | The LSR's Identifier. |
| T/F hwMplsLdpLsrLoopDetectionPresent | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.2 | TruthValue | read-only | A indication of whether this LSR supports loop detection. A value of 'true' indicates this LSR does support loop detection. A value of 'false' indicates this LSR does not support loop detection. |
| INT hwMplsLdpLsrLoopDetectionAdminStatus | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.3 | INTEGER | read-write | To enable loop detection the value of this object should be 'enabled(1)'. Otherwise, to turn off loop detection, set this value to 'disabled(2)'. |
| INT hwMplsLdpLsrPathVectorLimit | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.4 | INTEGER | read-write | This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit of path vectors which this LSR uses to treat the message as if it had traversed a loop. |
| INT hwMplsLdpLsrHopCountLimit | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.5 | INTEGER | read-write | This object only has meaning if hwMplsLdpLsrLoopDetectionPresent has the value of 'true'. The value of this object represents the limit on the Hop Count which this LSR uses to treat the message as if it had traversed a loop. |
| T/F hwMplsLdpLsrLoopPreventionPresent | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.6 | TruthValue | read-only | A indication of whether this LSR supports loop prevention. A value of 'true' indicates this LSR does support loop prevention. A value of 'false' indicates this LSR does not support loop prevention. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'true'. |
| INT hwMplsLdpLsrLoopPreventionAdminStatus | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.7 | INTEGER | read-write | To enable loop prevention the value of this object should be 'enabled(1)'. Otherwise, to turn off loop prevention, set this value to 'disabled(2)'. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'enabled'. |
| INT hwMplsLdpLsrLabelRetentionMode | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.8 | INTEGER | read-write | The LSR can be configured to use either conservative or liberal label retention mode. If the value of this object is conservative(1) then advertized label mappings are retained only if they will be used to forward packets, i.e. if label came from a valid next hop. If the value of this object is liberal(2) then all advertized label mappings are retained whether they are from a valid next hop or not. Current release of HuaweiMPLS does not provide support to assign this MIB object with a value 'liberal'. |
| INT hwMplsLdpLsrIncarnID | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.9 | INTEGER | read-only | The incarnation acts as index to all the elements in this table. |
| INT hwMplsLdpLsrMaxLdpEntities | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.10 | INTEGER | read-write | The maximum number of LDP entities that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxLocalPeers | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.11 | INTEGER | read-write | The maximum number of Local LDP peers that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxRemotePeers | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.12 | INTEGER | read-write | The maximum number of Remote LDP peers that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxIfaces | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.13 | INTEGER | read-write | The maximum number of Label enabled Interfaces that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxLsps | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.14 | INTEGER | read-write | The maximum number of Label Switched Paths that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxCrlspTnls | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.15 | INTEGER | read-write | The maximum number of CRLSPs that can be supported by this Incarnation. |
| INT hwMplsLdpLsrMaxErhopPerCrlspTnl | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.16 | INTEGER | read-write | The maximum number of ER-Hops that can be supported in a CRLSP tunnel. |
| ROW hwMplsLdpLsrRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.17 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| INT hwMplsLdpLsrMaxVcmCapability | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.18 | INTEGER | read-write | |
| T/F hwMplsLdpLsrVcmPathVecInAllLblMapPresent | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.19 | TruthValue | read-write | |
| INT hwMplsLdpLsrRequestRetrytimerValue | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.20 | INTEGER | read-write | |
| INT hwMplsLdpLsrNumOfRequestRetryAttempts | 1.3.6.1.4.1.2011.5.12.2.1.1.1.1.21 | INTEGER | read-write | |
| hwMplsLdpEntityObjects | 1.3.6.1.4.1.2011.5.12.2.1.2 | |||
| hwMplsLdpEntityTable | 1.3.6.1.4.1.2011.5.12.2.1.2.1 | not-accessible | This table contains information about the MPLS Label Distribution Protocol Entities which exist on this Label Switch Router (LSR). | |
| hwMplsLdpEntityEntry | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1 | not-accessible | An entry in this table represents an LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An LPD Entity is uniquely indexed by its LPD Identifier. | |
| OID hwMplsLdpEntityID | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.1 | MplsLdpIdentifier | accessible-for-notify | The LDP identifier which uniquely identifies the LDP Entity. This is s six octet quantity which is used to identify an Label Switch Router (LSR) label space. The first four octets encode an IP address assigned to the LSR, and the last two octets identify a specific label space within the LSR. |
| INT hwMplsLdpEntityLabelSpaceType | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.2 | INTEGER | read-create | The type of label spaces associated with this LDP Entity. The values are 'unknown(1)' The type of label space is not known. 'perInterface(2)' The type of label space is tied to an interface. 'perPlatform(3)' The type of label space is tied to the platform. |
| OID hwMplsLdpEntityDefVpi | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.3 | AtmVpIdentifier | read-create | The Default VPI value used in the label for the default VPI. |
| OID hwMplsLdpEntityDefVci | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.4 | AtmVcIdentifier | read-create | The Default VCI value used in the label for the default VCI. |
| OID hwMplsLdpEntityUnlabTrafVpi | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.5 | AtmVpIdentifier | read-create | VPI value of the VCC supporting unlabeled traffic. |
| OID hwMplsLdpEntityUnlabTrafVci | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.6 | AtmVcIdentifier | read-create | VCI value of the VCC supporting unlabeled traffic. |
| INT hwMplsLdpEntityMergeCapability | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.7 | INTEGER | read-create | Sets the merge capability for this LDP entity. Current Release of HuaweiMPLS does not provide support for any kind of Merge. |
| INT hwMplsLdpEntityVcDirectionality | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.8 | INTEGER | read-create | Sets the VC directionality for this LDP entity. |
| INT hwMplsLdpEntityWellKnownDiscoveryPort | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.9 | INTEGER | read-create | The well known LDP Discovery Port. |
| INT hwMplsLdpEntityMtu | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.10 | INTEGER | read-create | The maximum transmission unit (MTU) that was configured for this entity. |
| INT hwMplsLdpEntityKeepAliveHoldTimer | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.11 | INTEGER | read-create | The two octet value which is the proposed keep alive hold timer for this LDP Entity. |
| INT hwMplsLdpEntityFailedInitSessionThreshold | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.12 | INTEGER | read-create | When attempting to establish a session with a given Peer, the given LDP Entity should send out a notification when exceeding this threshold. A value of 0 (zero) for this object indicates that the threshold is infinity. In other words, a notification will not be sent if the value of this object is 0 (zero). |
| INT hwMplsLdpEntityLabelDistributionMethod | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.13 | INTEGER | read-create | For any given LDP session, the method of label distribution must be specified. Current release of HuaweiMPLS does not provide support for 'downstreamUnsolicited'. |
| INT hwMplsLdpEntityLabelAllocationMethod | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.14 | INTEGER | read-create | For any given LDP session, the method of label allocation must be specified. Label can be allocated in either ordered mode or in the independent mode. |
| INT hwMplsLdpEntityHelloHoldTimer | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.15 | INTEGER | read-create | The two octet value which is the proposed hello hold timer for this LDP Entity. |
| ROW hwMplsLdpEntityRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.2.1.1.16 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpEntityIfTable | 1.3.6.1.4.1.2011.5.12.2.1.2.2 | not-accessible | This table contains information about the interfaces that are associated with an LDP Entity. There should be atleast one interface associated with each LDP Entity. If the LDP Entity supports 'per interface based label space' label type then, atmost one interface can be associated with the LDP entity. If the LDP Entity supports 'per platform based label space' label type then, more than one interface can be associated with the LDP Entity. | |
| hwMplsLdpEntityIfEntry | 1.3.6.1.4.1.2011.5.12.2.1.2.2.1 | not-accessible | An entry in this table represents an Interface that is associated with a LDP entity. An entry can be created by a network administrator or by an SNMP agent as instructed by LDP. An interface (row in this table) can be created/deleted only when the associted LDP Entity row status has the value notInService or notReady. | |
| U32 hwMplsLdpEntityIfIndex | 1.3.6.1.4.1.2011.5.12.2.1.2.2.1.1 | Unsigned32 | not-accessible | Identifier that uniquely identifies the Interface with respect to an LDP Entity. The ifIndex value corresponds to the IfIndex value of the MIB-II |
| IP hwMplsLdpEntityIfIpv4Address | 1.3.6.1.4.1.2011.5.12.2.1.2.2.1.2 | IpAddress | read-create | The IPv4 address associated with the interface. |
| ROW hwMplsLdpEntityIfRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.2.2.1.3 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpEntityConfAtmLabelRangeTable | 1.3.6.1.4.1.2011.5.12.2.1.2.3 | not-accessible | The MPLS LDP Entity Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Entities. LDP Entities which use ATM must have at least one entry in this table. | |
| hwMplsLdpEntityConfAtmLabelRangeEntry | 1.3.6.1.4.1.2011.5.12.2.1.2.3.1 | not-accessible | A row in the LDP Entity Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Entity are UNIQUE and non-overlapping. For example, for a specific LDP Entity index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP EntityID and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Entity MUST include the default VPI/VCI values denoted in the LDP Entity Table. | |
| OID hwMplsLdpEntityConfAtmLabelRangeLowerBoundVPI | 1.3.6.1.4.1.2011.5.12.2.1.2.3.1.1 | AtmVpIdentifier | not-accessible | The minimum VPI number configured for this range. |
| OID hwMplsLdpEntityConfAtmLabelRangeLowerBoundVCI | 1.3.6.1.4.1.2011.5.12.2.1.2.3.1.2 | AtmVcIdentifier | not-accessible | The minimum VCI number configured for this range. |
| OID hwMplsLdpEntityConfAtmLabelRangeUpperBoundVPI | 1.3.6.1.4.1.2011.5.12.2.1.2.3.1.3 | AtmVpIdentifier | read-create | The maximum VPI number configured for this range. |
| OID hwMplsLdpEntityConfAtmLabelRangeUpperBoundVCI | 1.3.6.1.4.1.2011.5.12.2.1.2.3.1.4 | AtmVcIdentifier | read-create | The maximum VCI number configured for this range. |
| ROW hwMplsLdpEntityConfAtmLabelRangeRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.2.3.1.5 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpEntityStatsTable | 1.3.6.1.4.1.2011.5.12.2.1.2.4 | not-accessible | This table is a read-only table which augments the MplsLdpConfEntityTable. The purpose of this table is to keep statistical information about the LDP Entities on the LSR. | |
| hwMplsLdpEntityStatsEntry | 1.3.6.1.4.1.2011.5.12.2.1.2.4.1 | not-accessible | A row in this table contains statistical information about an LDP Entity. | |
| C32 hwMplsLdpAttemptedSessionsEx | 1.3.6.1.4.1.2011.5.12.2.1.2.4.1.1 | Counter32 | read-only | A count of the total attempted sessions for this LDP Entity. |
| hwMplsLdpPeerObjects | 1.3.6.1.4.1.2011.5.12.2.1.3 | |||
| hwMplsLdpPeerTable | 1.3.6.1.4.1.2011.5.12.2.1.3.1 | not-accessible | Information about LDP peers which have been discovered by the LDP Entities that are managed by this agent. | |
| hwMplsLdpPeerEntry | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1 | not-accessible | Information about a single Peer. | |
| U32 hwMplsLdpPeerIndex | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.1 | Unsigned32 | not-accessible | An identifier for the LDP peer that is unique within the scope of this agent. |
| OID hwMplsLdpPeerID | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.2 | MplsLdpIdentifier | read-create | The LDP identifier of this LDP Peer. |
| ADR hwMplsLdpPeerInternetworkAddrType | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.3 | AddressFamilyNumbers | read-create | The type of the internetwork layer address of this LDP peer. This object indicates how the value of hwMplsLdpPeerInternetworkAddr is to be interpreted. |
| MPL hwMplsLdpPeerInternetworkAddr | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.4 | MplsLdpGenAddr | read-create | The value of the internetwork layer address of this LDP peer. |
| INT hwMplsLdpPeerDefaultMtu | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.5 | INTEGER | read-create | The default maximum transmission unit (MTU) of the LDP Peer. |
| INT hwMplsLdpPeerKeepAliveHoldTimer | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.6 | INTEGER | read-create | The two octet unsigned non zero INTEGER that indicates the number of seconds that this Peer proposes for the value of the KeepAlive Interval. |
| INT hwMplsLdpPeerLabelDistributionMethod | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.7 | INTEGER | read-create | For any given LDP session, the method of label distribution must be specified. |
| INT hwMplsLdpPeerType | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.8 | INTEGER | read-create | Indicates whether a peer is a local peer or a remote peer |
| ROW hwMplsLdpPeerRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.3.1.1.9 | RowStatus | read-create | An object that allows entries in this table to be created and deleted using the RowStatus convention. |
| hwMplsLdpPeerConfAtmLabelRangeTable | 1.3.6.1.4.1.2011.5.12.2.1.3.2 | not-accessible | The MPLS LDP Peer Configurable ATM Label Range Table. The purpose of this table is to provide a mechanism for specifying a contiguous range of vpi's with a contiguous range of vci's, or a 'label range' for LDP Peers. LDP Peers which use ATM must have at least one entry in this table. | |
| hwMplsLdpPeerConfAtmLabelRangeEntry | 1.3.6.1.4.1.2011.5.12.2.1.3.2.1 | not-accessible | A row in the LDP Peer Configurable ATM Label Range Table. One entry in this table contains information on a single range of labels represented by the configured Upper and Lower Bounds VPI/VCI pairs. NOTE: The ranges for a specific LDP Peer are UNIQUE and non-overlapping. For example, for a specific LDP Peer index, there could be one entry having ConfLowerBound vpi/vci == 0/32, and ConfUpperBound vpi/vci == 0/100, and a second entry for this same interface with ConfLowerBound vpi/vci == 0/101 and ConfUpperBound vpi/vci == 0/200. However, there could not be a third entry with ConfLowerBound vpi/vci == 0/200 and ConfUpperBound vpi/vci == 0/300 because this label range overlaps with the second entry (i.e. both entries now have 0/200). A row will not be created unless a unique and non-overlapping range is specified. Thus, row creation implies a one-shot row creation of LDP PeerIndex and ConfLowerBound vpi/vci and ConfUpperBound vpi/vci. At least one label range entry for a specific LDP Peer MUST include the default VPI/VCI values denoted in the LDP Peer Table. | |
| OID hwMplsLdpPeerConfAtmLabelRangeLowerBoundVPI | 1.3.6.1.4.1.2011.5.12.2.1.3.2.1.1 | AtmVpIdentifier | not-accessible | The minimum VPI number configured for this range. |
| OID hwMplsLdpPeerConfAtmLabelRangeLowerBoundVCI | 1.3.6.1.4.1.2011.5.12.2.1.3.2.1.2 | AtmVcIdentifier | not-accessible | The minimum VCI number configured for this range. |
| OID hwMplsLdpPeerConfAtmLabelRangeUpperBoundVPI | 1.3.6.1.4.1.2011.5.12.2.1.3.2.1.3 | AtmVpIdentifier | read-only | The maximum VPI number configured for this range. |
| OID hwMplsLdpPeerConfAtmLabelRangeUpperBoundVCI | 1.3.6.1.4.1.2011.5.12.2.1.3.2.1.4 | AtmVcIdentifier | read-only | The maximum VCI number configured for this range. |
| hwMplsLdpSessionObjects | 1.3.6.1.4.1.2011.5.12.2.1.4 | |||
| hwMplsLdpSessionTable | 1.3.6.1.4.1.2011.5.12.2.1.4.1 | not-accessible | A table of Sessions between the LDP Entities and LDP Peers. | |
| hwMplsLdpSessionEntry | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1 | not-accessible | An entry in this table represents information on a single session between an LDP Entity and LDP Peer. | |
| U32 hwMplsLdpSessionIndex | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.1 | Unsigned32 | not-accessible | An unique identifier for this entry such that it identifies a specific LDP Session. |
| OID hwMplsLdpSessionID | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.2 | MplsLdpIdentifier | read-only | The LDP Session identifier. |
| INT hwMplsLdpSessionProtocolVersion | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.3 | INTEGER | read-only | The version of the LDP Protocol which this session is using. |
| NUM hwMplsLdpSessionKeepAliveHoldTimeRemaining | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.4 | TimeInterval | read-only | The keep alive hold time remaining for this session. |
| INT hwMplsLdpSessionRole | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.5 | INTEGER | read-only | An indication of whether the LDP Entity associated with this session is acting in an 'active' role or a 'passive' role. |
| INT hwMplsLdpSessionState | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.6 | INTEGER | read-only | The current state of the session, all of the states 1 - 5 are based on the state machine for session negotiation behavior. |
| OID hwMplsLdpSessionAtmLabelRangeLowerBoundVPI | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.7 | AtmVpIdentifier | read-only | The minimum VPI number for this range. |
| OID hwMplsLdpSessionAtmLabelRangeLowerBoundVCI | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.8 | AtmVcIdentifier | read-only | The minimum VCI number for this range. |
| OID hwMplsLdpSessionAtmLabelRangeUpperBoundVPI | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.9 | AtmVpIdentifier | read-only | The maximum VPI number for this range. |
| OID hwMplsLdpSessionAtmLabelRangeUpperBoundVCI | 1.3.6.1.4.1.2011.5.12.2.1.4.1.1.10 | AtmVcIdentifier | read-only | The maximum VCI number for this range. |
| hwMplsLdpHelloAdjacencyObjects | 1.3.6.1.4.1.2011.5.12.2.1.5 | |||
| hwMplsLdpHelloAdjacencyTable | 1.3.6.1.4.1.2011.5.12.2.1.5.1 | not-accessible | A table of Hello Adjacencies for Sessions. | |
| hwMplsLdpHelloAdjacencyEntry | 1.3.6.1.4.1.2011.5.12.2.1.5.1.1 | not-accessible | Each row represents a single LDP Hello Adjacency. An LDP Session can have one or more Hello adjacencies. | |
| U32 hwMplsLdpHelloAdjacencyIndex | 1.3.6.1.4.1.2011.5.12.2.1.5.1.1.1 | Unsigned32 | not-accessible | An identifier for the adjacency. |
| NUM hwMplsLdpHelloAdjacencyHoldTimeRemaining | 1.3.6.1.4.1.2011.5.12.2.1.5.1.1.2 | TimeInterval | read-only | The time remaining for this Hello Adjacency. |
| hwMplsLdpCrlspTnlObjects | 1.3.6.1.4.1.2011.5.12.2.1.6 | |||
| hwMplsLdpCrlspTnlTable | 1.3.6.1.4.1.2011.5.12.2.1.6.1 | not-accessible | The hwMplsLdpCrlspTnlTable allows new CRLSP MPLS tunnels to be created. The ER hops associated with a CRLSP tunnel are to be configured using the hwMplsLdpCrlspErHopTable. | |
| hwMplsLdpCrlspTnlEntry | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1 | not-accessible | An entry in this table represents an CRLSP MPLS tunnel. An entry can be created by a network administrator. | |
| MPL hwMplsLdpCrlspTnlIndex | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.1 | MplsTunnelIndex | accessible-for-notify | Uniquely identifies this row. |
| STR hwMplsLdpCrlspTnlName | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.2 | DisplayString | read-create | The 'canonical' name assigned to the tunnel that can be used to refer to it on the 'console' port. |
| INT hwMplsLdpCrlspTnlDirection | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.3 | INTEGER | read-create | Whether this tunnel is unidirectional-incoming, unidirectional-outgoing, or bidirectional. |
| INT hwMplsLdpCrlspTnlSignallingProto | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.4 | INTEGER | read-create | The signaling protocol, if any, that set up this tunnel. |
| INT hwMplsLdpCrlspTnlSetupPrio | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.5 | INTEGER | read-create | The setup priority of this tunnel. |
| INT hwMplsLdpCrlspTnlHoldingPrio | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.6 | INTEGER | read-create | The holding priority for this tunnel. |
| BIT hwMplsLdpCrlspTnlPeakDataRate | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.7 | BitRate | read-create | The peak rate - the maximum rate at which traffic will be sent on the CRLSP. |
| BUR hwMplsLdpCrlspTnlPeakBurstSize | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.8 | BurstSize | read-create | The peak burst size - the maximum burst size of the traffic that can occur in the established CRLSP. |
| BIT hwMplsLdpCrlspTnlCommittedDataRate | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.9 | BitRate | read-create | The committed rate - the committed rate at which traffic will be sent on the CRLSP. |
| BUR hwMplsLdpCrlspTnlCommittedBurstSize | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.10 | BurstSize | read-create | The committed burst size - the committed burst size of the traffic that will be handled in the established CRLSP. |
| BUR hwMplsLdpCrlspTnlExcessBurstSize | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.11 | BurstSize | read-create | The Excess burst size - the excess burst size limit to be used for traffic conditioning at the ingress of the CRLSP. |
| T/F hwMplsLdpCrlspTnlIsPinned | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.12 | TruthValue | read-create | Indicates whether the loose-routed hops of this tunnel are to be pinned. |
| INT hwMplsLdpCrlspTnlFrequency | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.13 | INTEGER | read-create | Indicates the frequency of usage of the established CRLSP. |
| INT hwMplsLdpCrlspTnlWeight | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.14 | INTEGER | read-create | Indicates the weight that is the established CRLSP. |
| ROW hwMplsLdpCrlspTnlRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.6.1.1.15 | RowStatus | read-create | For controlling the state of this row. The status can be set to 'active' only when atleast one ERHOP is created in the hwMplsLdpErHopTable, associated with this tunnel. |
| hwMplsLdpCrlspErHopTable | 1.3.6.1.4.1.2011.5.12.2.1.6.2 | not-accessible | The hwMplsLdpCrlspErHopTable is used to indicate the hops, strict or loose, for an MPLS CRLSP tunnel defined in hwMplsLdpCrlspTnlTable. There must be atleast one entry in this table for each CRLSP tunnel that is supported in the hwMplsLdpCrlspTnlTable. The first row in the table is the first hop after the origination point of the tunnel. | |
| hwMplsLdpCrlspErHopEntry | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1 | not-accessible | An entry in this table represents a tunnel hop. An entry is created by a network administrator for signalled ERLSP set up by LDP or RSVP. | |
| INT hwMplsLdpCrlspErHopIndex | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1.1 | INTEGER | not-accessible | Secondary index into this table identifying the particular hop. |
| INT hwMplsLdpCrlspErHopAddrType | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1.2 | INTEGER | read-create | Address type of this hop. |
| IP hwMplsLdpCrlspErHopIpv4Addr | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1.3 | IpAddress | read-create | If hwMplsLdpCrlspErHopAddrType is ipV4(1), IPv4 address of this hop. This object is not significant otherwise and should return a value of 0. |
| INT hwMplsLdpCrlspErHopIpv4PrefixLen | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1.4 | INTEGER | read-create | If hwMplsLdpCrlspErHopAddrType is ipV4(1), prefix length for this hop's IPv4 address. This object is not significant otherwise and should return a value of 0. |
| INT hwMplsLdpCrlspErHopStrictOrLoose | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1.5 | INTEGER | read-create | Whether this is a strict or loose hop. |
| ROW hwMplsLdpCrlspErHopRowStatus | 1.3.6.1.4.1.2011.5.12.2.1.6.2.1.6 | RowStatus | read-create | For creating, modifying and deleting this row. |
| hwMplsLdpNotifications | 1.3.6.1.4.1.2011.5.12.2.2 | |||
| hwMplsLdpNotificationPrefix | 1.3.6.1.4.1.2011.5.12.2.2.0 | |||
| NTF hwMplsLdpFailedInitSessionThresholdExceeded | 1.3.6.1.4.1.2011.5.12.2.2.0.1 | This notification is generated whenever the value of hwMplsLdpEntityFailedInitSessionThreshold is exceeded. | ||
| NTF hwMplsLdpCrlspTunnelUp | 1.3.6.1.4.1.2011.5.12.2.2.0.2 | This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Label mapping message from the downstream LSR for the LAbel request sent for the CRLSP tunnel. | ||
| NTF hwMplsLdpCrlspTunnelDown | 1.3.6.1.4.1.2011.5.12.2.2.0.3 | This notification is generated when a CRLSP Row status is modified to destroy the CRLSP tunnel. - due to pre-emption etc., | ||
| NTF hwMplsLdpCrlspTunnelSetupFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.4 | This notification is generated by the Ingress LSR of the CRLSP tunnel on the receipt of Nak message from the downstream LSR for the Label request sent for the CRLSP tunnel. This can occur due to improper ER hop values being set, or Traffic resources not available etc., | ||
| NTF hwMplsLdpIncarnUpEventFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.11 | This notification is generated by LDP to notify the Incarnation UP Event failure | ||
| NTF hwMplsLdpIncarnDownEventFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.12 | This notification is generated by LDP to notify the Incarnation DOWN Event failure | ||
| NTF hwMplsLdpEntityUpEventFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.13 | This notification is generated by LDP to notify the ENTITY UP Event failure | ||
| NTF hwMplsLdpEntityDownEventFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.14 | This notification is generated by LDP to notify the ENTITY DOWN Event failure | ||
| NTF hwMplsLdpSessionUpEventFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.15 | Generation of this trap occurs when the value of 'hwMplsLdpSessionState' enters the 'operational(5)' state. | ||
| NTF hwMplsLdpSessionDownEventFailure | 1.3.6.1.4.1.2011.5.12.2.2.0.16 | Generation of this trap occurs when the value of 'hwMplsLdpSessionState' leaves the 'operational(5)' state. |
RFC description
MPLS Label Distribution Protocol configuration and monitoring for Huawei routers and LSRs.
Start monitoring Huawei router running MPLS LDP with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.