All MIBs › CROUTE-MIB › vlBridgeStatus
vlBridgeStatus
Module: CROUTE-MIB
OID (symbolic): CROUTE-MIB::vlBridgeStatus
OID (numeric): 1.3.6.1.4.1.81.31.3.2.1.4
Node type: OBJECT-TYPE
Type: RowStatus
Access: read-write
Description: It is used to create or delete an entry
What is vlBridgeStatus?
This read-write RowStatus object controls the creation and deletion of a VLAN bridge-group entry. An admin uses this to add a VLAN into a bridge group or remove it from one. For example, after deciding two VLANs should be bridged together, the admin creates the corresponding entries and activates them via vlBridgeStatus.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.81.31.3.2.1.4 snmpwalk -v2c -c public <target> CROUTE-MIB::vlBridgeStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.81.31.3.2.1.4.1 snmpget -v2c -c public <target> CROUTE-MIB::vlBridgeStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.81.31.3.2.1.4.1 s <value>
Start monitoring Layer 3 switch platform (vendor unclear, BOOTP/RIP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CROUTE-MIB::vlBridgeStatus OID value, configure state conditions and alerts, and monitor any Layer 3 switch platform (vendor unclear, BOOTP/RIP) from a single console.
OID Breakdown
Upper-level ancestors (7 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.81 | lannet | GEN-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.81.31 | croute | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3 | layer2 | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3.2 | vlBridgeTable | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3.2.1 | vlBridgeEntry | CROUTE-MIB |
| 1.3.6.1.4.1.81.31.3.2.1.4 | vlBridgeStatus | CROUTE-MIB |